diff --git a/ops/deployments-from-scratch.md b/ops/deployments-from-scratch.md
index e7be9bd..14432e4 100644
--- a/ops/deployments-from-scratch.md
+++ b/ops/deployments-from-scratch.md
@@ -39,7 +39,7 @@
 
 * Target dir: `/srv/op-sepolia/optimism-deployment`
 
-* Cleanup an existing deployment on virtual machine if required:
+* Cleanup an existing deployment on VM if required:
 
   ```bash
   cd /srv/op-sepolia
@@ -99,7 +99,7 @@
 
 ### Run
 
-* Execute the `run-optimism.yml` Ansible playbook on the remote host to set up and run L2:
+* Set up and run L2 on remote host by executing `run-optimism.yml` Ansible playbook on your local machine:
 
   * Create a new `hosts.ini` file:
 
@@ -110,16 +110,15 @@
   * Edit the [`hosts.ini`](./hosts.ini) file to run the playbook on a remote machine:
 
     ```ini
-    [<deployment_host>]
+    [l2_host]
     <host_name> ansible_host=<target_ip> ansible_user=<ssh_user> ansible_ssh_common_args='-o ForwardAgent=yes'
     ```
 
-    - Replace `<deployment_host>` with `l2_host`
     - Replace `<host_name>` with the alias of your choice
     - Replace `<target_ip>` with the IP address or hostname of the target machine
     - Replace `<ssh_user>` with the SSH username (e.g., dev, ubuntu)
 
-  * Verify that you are able to connect to the host using the following command
+  * Verify that you are able to connect to the host using the following command:
 
     ```bash
     ansible all -m ping -i hosts.ini -k
@@ -140,15 +139,9 @@
     LANG=en_US.utf8 ansible-playbook -i hosts.ini run-optimism.yml --extra-vars='{ "target_host": "l2_host"}'  --user $USER -kK
     ```
 
-  * For skipping container build, run with `"skip_container_build" : true` in the `--extra-vars` parameter:
-
-    ```bash
-    LANG=en_US.utf8 ansible-playbook -i hosts.ini run-optimism.yml --extra-vars='{ "target_host": "l2_host", "skip_container_build": true }' --user $USER -kK
-    ```
-
 * Bridge funds on L2:
 
-  * Set the following variables:
+  * On the deployment VM, set the following variables:
 
     ```bash
     # Switch to `/srv/op-sepolia` directory on the virtual machine
@@ -188,7 +181,7 @@
 
     * Allow a couple minutes for the bridge to complete
 
-  * Check balance on L2
+  * Check balance on L2:
 
     ```bash
     docker run --rm --network $NETWORK cerc/optimism-contracts:local "cast balance $ACCOUNT --rpc-url $L2_RPC"
@@ -203,13 +196,13 @@
 
 ## L1 Nitro Contracts Deployment
 
-* Stack: <https://git.vdb.to/cerc-io/nitro-stack>
+* Stack: <https://git.vdb.to/cerc-io/nitro-stack/src/branch/main/stack-orchestrator/stacks/nitro-contracts>
 
-* Source repos: <https://github.com/cerc-io/go-nitro>
+* Source repo: <https://github.com/cerc-io/go-nitro>
 
 * Target dir: `/srv/bridge/nitro-contracts-deployment`
 
-* Cleanup an existing deployment on virtual machine if required:
+* Cleanup an existing deployment on VM if required:
 
   ```bash
   cd /srv/bridge
@@ -222,19 +215,19 @@
 
 ### Setup
 
-* Following commands have to be executed in `testnet-ops/nitro-contracts-setup` directory on your local machine
+* Switch to `testnet-ops/nitro-contracts-setup` directory on your local machine:
 
   ```bash
   cd testnet-ops/nitro-contracts-setup
   ```
 
-* Copy the `contract-vars-example.yml` vars file
+* Copy the `contract-vars-example.yml` vars file:
 
   ```bash
   cp contract-vars.example.yml contract-vars.yml
   ```
 
-* Edit [`contract-vars.yml`](./contract-vars.yml) and fill in the following values
+* Edit [`contract-vars.yml`](./contract-vars.yml) and fill in the following values:
 
   ```bash
   # L1 RPC endpoint
@@ -262,7 +255,7 @@
 
 ### Run
 
-* Execute the `deploy-contracts.yml` Ansible playbook on the remote host to deploy Nitro contracts:
+* Deploy nitro contracts on remote host by executing `deploy-contracts.yml` Ansible playbook on your local machine:
 
   * Create a new `hosts.ini` file:
 
@@ -273,16 +266,15 @@
   * Edit the [`hosts.ini`](./hosts.ini) file to run the playbook on a remote machine:
 
     ```ini
-    [<deployment_host>]
+    [nitro_host]
     <host_name> ansible_host=<target_ip> ansible_user=<ssh_user> ansible_ssh_common_args='-o ForwardAgent=yes'
     ```
 
-    - Replace `<deployment_host>` with `nitro_host`
     - Replace `<host_name>` with the alias of your choice
     - Replace `<target_ip>` with the IP address or hostname of the target machine
     - Replace `<ssh_user>` with the SSH username (e.g., dev, ubuntu)
 
-  * Verify that you are able to connect to the host using the following command
+  * Verify that you are able to connect to the host using the following command:
 
     ```bash
     ansible all -m ping -i hosts.ini -k
@@ -303,13 +295,7 @@
     LANG=en_US.utf8 ansible-playbook -i hosts.ini deploy-contracts.yml --extra-vars='{ "target_host": "nitro_host"}'  --user $USER -kK
     ```
 
-  * For skipping container build, run with `"skip_container_build" : true` in the `--extra-vars` parameter:
-
-    ```bash
-    LANG=en_US.utf8 ansible-playbook -i hosts.ini deploy-contracts.yml --extra-vars='{ "target_host": "nitro_host", "skip_container_build": true }' --user $USER -kK
-    ```
-
-* Check logs for deployments on the virtual machine:
+* Check logs for deployment on the virtual machine:
 
   ```bash
   cd /srv/bridge
@@ -325,13 +311,13 @@
 
 ## Nitro Bridge
 
-* Stack: <https://git.vdb.to/cerc-io/nitro-stack>
+* Stack: <https://git.vdb.to/cerc-io/nitro-stack/src/branch/main/stack-orchestrator/stacks/bridge>
 
-* Source repos: <https://github.com/cerc-io/go-nitro>
+* Source repo: <https://github.com/cerc-io/go-nitro>
 
 * Target dir: `/srv/bridge/bridge-deployment`
 
-* Cleanup an existing deployment on virtual machine if required:
+* Cleanup an existing deployment on VM if required:
 
   ```bash
   cd /srv/bridge
@@ -345,7 +331,39 @@
 
 ### Setup
 
-* Following commands have to be executed in `testnet-ops/nitro-bridge-setup` directory on your local machine
+* Execute the command on the deployment VM to get the deployed L1 Nitro contract addresses along with the L1 asset address:
+
+  ```bash
+  cd /srv/bridge
+
+  laconic-so deployment --dir nitro-contracts-deployment exec nitro-contracts "cat /app/deployment/nitro-addresses.json"
+
+  # Expected output:
+  # {
+  #   "11155111": [
+  #     {
+  #       "name": "geth",
+  #       "chainId": "11155111",
+  #       "contracts": {
+  #         "ConsensusApp": {
+  #           "address": "0xC98aD0B41B9224dad0605be32A9241dB9c67E2e8"
+  #         },
+  #         "NitroAdjudicator": {
+  #           "address": "0x7C22fdA703Cdf09eB8D3B5Adc81F723526713D0e"
+  #         },
+  #         "VirtualPaymentApp": {
+  #           "address": "0x778e4e6297E8BF04C67a20Ec989618d72eB4a19E"
+  #         },
+  #         "Token": {
+  #           "address": "0x02ebfB2706527C7310F2a7d9098b2BC61014C5F2"
+  #         }
+  #       }
+  #     }
+  #   ]
+  # }
+  ```
+
+* Switch to `testnet-ops/nitro-bridge-setup` directory on your local machine:
 
   ```bash
   cd testnet-ops/nitro-bridge-setup
@@ -407,7 +425,7 @@
 
 ### Run
 
-* Execute the `run-nitro-bridge.yml` Ansible playbook on the remote host to deploy the L2 contracts and start the bridge:
+* Deploy L2 contracts and start the bridge on remote host by executing `run-nitro-bridge.yml` Ansible playbook on your local machine:
 
   * Create a new `hosts.ini` file:
 
@@ -418,16 +436,15 @@
   * Edit the [`hosts.ini`](./hosts.ini) file to run the playbook on a remote machine:
 
     ```ini
-    [<deployment_host>]
+    [nitro_host]
     <host_name> ansible_host=<target_ip> ansible_user=<ssh_user> ansible_ssh_common_args='-o ForwardAgent=yes'
     ```
 
-    - Replace `<deployment_host>` with `nitro_host`
     - Replace `<host_name>` with the alias of your choice
     - Replace `<target_ip>` with the IP address or hostname of the target machine
     - Replace `<ssh_user>` with the SSH username (e.g., dev, ubuntu)
 
-  * Verify that you are able to connect to the host using the following command
+  * Verify that you are able to connect to the host using the following command:
 
     ```bash
     ansible all -m ping -i hosts.ini -k
@@ -448,12 +465,6 @@
     LANG=en_US.utf8 ansible-playbook -i hosts.ini run-nitro-bridge.yml --extra-vars='{ "target_host": "nitro_host"}'  --user $USER -kK
     ```
 
-  * For skipping container build, run with `"skip_container_build" : true` in the `--extra-vars` parameter:
-
-    ```bash
-    LANG=en_US.utf8 ansible-playbook -i hosts.ini run-nitro-bridge.yml --extra-vars='{ "target_host": "nitro_host", "skip_container_build": true }' --user $USER -kK
-    ```
-
 * Check logs for deployments on the virtual machine:
 
   ```bash
diff --git a/testnet-nitro-node.md b/testnet-nitro-node.md
index e2c501a..399a427 100644
--- a/testnet-nitro-node.md
+++ b/testnet-nitro-node.md
@@ -92,12 +92,6 @@
   LANG=en_US.utf8 ansible-playbook -i localhost, --connection=local run-nitro-nodes.yml --extra-vars='{ "target_host": "localhost"}' --user $USER
   ```
 
-  * For skipping container build, run with `"skip_container_build" : true`:
-
-    ```bash
-    LANG=en_US.utf8 ansible-playbook -i localhost, --connection=local run-nitro-nodes.yml --extra-vars='{ "target_host": "localhost", "skip_container_build": true }' --user $USER
-    ```
-
 * Check status:
 
   ```bash