testnet-laconicd-stack/ops/deployments-from-scratch.md

# Create deployments from scratch (for reference only)

## Login

* Log in as `dev` user on the deployments VM

* All the deployments are placed in the `/srv` directory:

  ```bash
  cd /srv
  ```

## Prerequisites

* On deployments VM(s):

  * laconic-so: see [installation](https://git.vdb.to/cerc-io/stack-orchestrator#install)

* Local:

  * Clone the `cerc-io/testnet-ops` repository:

    ```bash
    git clone git@git.vdb.to:cerc-io/testnet-ops.git
    ```

  * Ansible: see [installation](https://git.vdb.to/cerc-io/testnet-ops#installation)

<details open>
  <summary>L2 Optimism</summary>

## L2 Optimism

* Stack: <https://git.vdb.to/cerc-io/fixturenet-optimism-stack>

* Source repos:
  * <github.com/ethereum-optimism/optimism@v1.7.7>
  * <github.com/ethereum-optimism/op-geth@v1.101315.2>

* Target dir: `/srv/op-sepolia/optimism-deployment`

* Cleanup an existing deployment if required:

  ```bash
  cd /srv/op-sepolia

  # Stop the deployment
  laconic-so deployment --dir optimism-deployment stop --delete-volumes

  # Remove the deployment dir
  sudo rm -rf optimism-deployment
  ```

### Setup

* Switch to `testnet-ops/l2-setup` directory on your local machine:

  ```bash
  cd testnet-ops/l2-setup
  ```

* Copy the `l2-vars-example.yml` vars file:

  ```bash
  cp l2-vars-example.yml l2-vars.yml
  ```

* Edit `l2-vars.yml` with required values:

  ```bash
  # L1 chain ID (Sepolia: 11155111)
  l1_chain_id: "11155111"

  # L1 RPC endpoint
  l1_rpc: "http://host.docker.internal:8545"

  # L1 RPC endpoint host or IP address
  l1_host: "host.docker.internal"

  # L1 RPC endpoint port number
  l1_port: "8545"

  # L1 Beacon endpoint
  l1_beacon: "http://host.docker.internal:8001"

  # Account credentials for the Admin account
  # Used for Optimism contracts deployment and funding other generated accounts
  l1_address: ""
  l1_priv_key: ""
  ```

* Update the target dir in `setup-vars.yml`:

  ```bash
  sed -i 's|^l2_directory:.*|l2_directory: /srv/op-sepolia|' setup-vars.yml

  # Will create deployment at /srv/op-sepolia/optimism-deployment
  ```

### Run

* Setup and run L2 by executing the `run-optimism.yml` Ansible playbook:

  ```bash
  LANG=en_US.utf8 ansible-playbook -i localhost, --connection=local run-optimism.yml --extra-vars='{ "target_host": "localhost"}' --user $USER
  ```

  * For skipping container build, run with `"skip_container_build" : true`:

    ```bash
    LANG=en_US.utf8 ansible-playbook -i localhost, --connection=local run-optimism.yml --extra-vars='{"target_host" : "localhost", "skip_container_build": true}' -kK --user $USER
    ```

* Bridge funds on L2:

  * Set the following variables:

    ```bash
    cd /srv/op-sepolia

    L1_RPC=http://host.docker.internal:8545
    L2_RPC=http://host.docker.internal:9545

    NETWORK=<the network name found above>

    DEPLOYMENT_CONTEXT=11155111
    ACCOUNT=<admin-account-address>
    ```

  * Read the bridge contract address from the L1 deployment records in the `op-node` container:

    ```bash
    BRIDGE=$(laconic-so deployment --dir optimism-deployment exec op-node "cat /l1-deployment/$DEPLOYMENT_CONTEXT-deploy.json" | jq -r .L1StandardBridgeProxy)

    # Get the funded account's pk
    ACCOUNT_PK=$(laconic-so deployment --dir optimism-deployment exec op-node "jq -r '.AdminKey' /l2-accounts/accounts.json")
    ```

  * Check that the starting balance for account on L2 is 0:

    ```bash
    docker run --rm --network $NETWORK cerc/optimism-contracts:local "cast balance $ACCOUNT --rpc-url $L2_RPC"

    # 0
    ```

  * Use cast to send ETH to the bridge contract:

    ```bash
    docker run --rm cerc/optimism-contracts:local "cast send --from $ACCOUNT --value 1ether $BRIDGE --rpc-url $L1_RPC --private-key $ACCOUNT_PK"
    ```

    * Allow a couple minutes for the bridge to complete

  * Check balance on L2

    ```bash
    docker run --rm --network $NETWORK cerc/optimism-contracts:local "cast balance $ACCOUNT --rpc-url $L2_RPC"

    # 100000000000000000
    ```

</details>

<details open>
  <summary>L1 Nitro Contracts Deployment</summary>

## L1 Nitro Contracts Deployment

* Stack: <https://git.vdb.to/cerc-io/nitro-stack>

* Source repos: <https://github.com/cerc-io/go-nitro>

* Target dir: `/srv/bridge/nitro-contracts-deployment`

* Cleanup an existing deployment on virtual machine if required:

  ```bash
  cd /srv/bridge

  # Stop the deployment
  laconic-so deployment --dir nitro-contracts-deployment stop --delete-volumes

  # Remove the deployment dir
  sudo rm -rf nitro-contracts-deployment

### Setup

* Following commands have to be executed in `testnet-ops/nitro-contracts-setup` directory on your local machine

  ```bash
  cd testnet-ops/nitro-contracts-setup
  ```

* Copy the `contract-vars-example.yml` vars file

  ```bash
  cp contract-vars-example.yml contract-vars.yml
  ```

* Edit [`contract-vars.yml`](./contract-vars.yml) and fill in the following values

  ```bash
  # L1 RPC endpoint
  geth_url: "https://sepolia.laconic.com"

  # L1 chain ID (Sepolia: 11155111)
  geth_chain_id: "11155111"

  # Private key for a funded account on L1 to use for contracts deployment on L1
  geth_deployer_pk: ""

  # Custom L1 token to be deployed
  token_name: ""
  token_symbol: ""
  intial_token_supply: ""
  ```

* Update the target dir in `setup-vars.yml`:

  ```bash
  sed -i 's|^nitro_directory:.*|nitro_directory: /srv/bridge|' vars.yml

  # Will create deployment at /srv/bridge/nitro-contracts-deployment
  ```

### Run

* Execute the `deploy-contracts.yml` Ansible playbook on the remote host to deploy Nitro contracts:

  * Create a new `hosts.ini` file:

    ```bash
    cp ../hosts.example.ini hosts.ini
    ```

  * Edit the [`hosts.ini`](./hosts.ini) file to run the playbook on a remote machine:

    ```ini
    [<deployment_host>]
    <host_name> ansible_host=<target_ip> ansible_user=<ssh_user> ansible_ssh_common_args='-o ForwardAgent=yes'
    ```

    - Replace `<deployment_host>` with `nitro_host`
    - Replace `<host_name>` with the alias of your choice
    - Replace `<target_ip>` with the IP address or hostname of the target machine
    - Replace `<ssh_user>` with the SSH username (e.g., dev, ubuntu)

  * Verify that you are able to connect to the host using the following command

    ```bash
    ansible all -m ping -i hosts.ini -k

    # Expected output:
    # <host_name> | SUCCESS => {
    #  "ansible_facts": {
    #      "discovered_interpreter_python": "/usr/bin/python3.10"
    #  },
    #  "changed": false,
    #  "ping": "pong"
    # }
    ```

  * Execute the `deploy-contracts.yml` Ansible playbook for remote deployment:

    ```bash
    LANG=en_US.utf8 ansible-playbook -i hosts.ini deploy-contracts.yml --extra-vars='{ "target_host": "nitro_host"}'  --user $USER -kK
    ```

  * For skipping container build, run with `"skip_container_build" : true` in the `--extra-vars` parameter:

    ```bash
    LANG=en_US.utf8 ansible-playbook -i hosts.ini deploy-contracts.yml --extra-vars='{ "target_host": "nitro_host", "skip_container_build": true }' --user $USER -kK
    ```

* Check logs for deployments on the virtual machine:

  ```bash
  cd /srv/bridge

  # Check the l1 nitro contract deployments
  laconic-so deployment --dir nitro-contracts-deployment logs nitro-contracts  -f
  ```

</details>

<details open>
  <summary>Nitro Bridge</summary>

## Nitro Bridge

* Stack: <https://git.vdb.to/cerc-io/nitro-stack>

* Source repos: <https://github.com/cerc-io/go-nitro>

* Target dir: `/srv/bridge/bridge-deployment`

* Cleanup an existing deployment on virtual machine if required:

  ```bash
  cd /srv/bridge

  # Stop the deployment
  laconic-so deployment --dir bridge-deployment stop --delete-volumes

  # Remove the deployment dir
  sudo rm -rf bridge-deployment
  ```

### Setup

* Following commands have to be executed in `testnet-ops/nitro-bridge-setup` directory on your local machine

  ```bash
  cd testnet-ops/nitro-bridge-setup
  ```

* Create the required vars file:

  ```bash
  cp bridge-vars-example.yml bridge-vars.yml
  ```

* Edit `bridge-vars.yml` with required values:

  ```bash
  # L1 WS endpoint
  nitro_l1_chain_url: "wss://sepolia.laconic.com"

  # L2 WS endpoint
  nitro_l2_chain_url: "wss://optimism.laconic.com"

  # Private key for bridge Nitro address
  nitro_sc_pk: ""

  # Private key for a funded account on L1
  # This account should have L1 tokens for funding Nitro channels
  nitro_chain_pk: ""

  # L1 chain ID (Sepolia: 11155111)
  geth_chain_id: "11155111"

  # L1 RPC endpoint
  geth_url: "https://sepolia.laconic.com"

  # L2 RPC endpoint
  optimism_url: "https://optimism.laconic.com"

  # Private key for a funded account for L1 contracts deployment
  geth_deployer_pk: ""

  # Private key for a funded account for L2 contracts deployment
  # Use the same account for L1 and L2 deployments
  optimism_deployer_pk: ""
  ```

* Update the target dir in `setup-vars.yml`:

  ```bash
  sed -i 's|^nitro_directory:.*|nitro_directory: /srv/bridge|' vars.yml

  # Will create deployment at /srv/bridge/nitro-contracts-deployment and /srv/bridge/bridge-deployment
  ```

### Run

* Execute the `run-nitro-bridge.yml` Ansible playbook on the remote host to deploy the L2 contracts and start the bridge:

  * Create a new `hosts.ini` file:

      ```bash
      cp ../hosts.example.ini hosts.ini
      ```

  * Edit the [`hosts.ini`](./hosts.ini) file to run the playbook on a remote machine:

    ```ini
    [<deployment_host>]
    <host_name> ansible_host=<target_ip> ansible_user=<ssh_user> ansible_ssh_common_args='-o ForwardAgent=yes'
    ```

    - Replace `<deployment_host>` with `nitro_host`
    - Replace `<host_name>` with the alias of your choice
    - Replace `<target_ip>` with the IP address or hostname of the target machine
    - Replace `<ssh_user>` with the SSH username (e.g., dev, ubuntu)

  * Verify that you are able to connect to the host using the following command

    ```bash
    ansible all -m ping -i hosts.ini -k

    # Expected output:
    # <host_name> | SUCCESS => {
    #  "ansible_facts": {
    #      "discovered_interpreter_python": "/usr/bin/python3.10"
    #  },
    #  "changed": false,
    #  "ping": "pong"
    # }
    ```

  * Execute the `run-nitro-bridge.yml` Ansible playbook for remote deployment:

    ```bash
    LANG=en_US.utf8 ansible-playbook -i hosts.ini run-nitro-bridge.yml --extra-vars='{ "target_host": "nitro_host"}'  --user $USER -kK
    ```

  * For skipping container build, run with `"skip_container_build" : true` in the `--extra-vars` parameter:

    ```bash
    LANG=en_US.utf8 ansible-playbook -i hosts.ini run-nitro-bridge.yml --extra-vars='{ "target_host": "nitro_host", "skip_container_build": true }' --user $USER -kK
    ```

* Check logs for deployments on the virtual machine:

  ```bash
  cd /srv/bridge

  # Check the l2 nitro contract deployments
  laconic-so deployment --dir bridge-deployment logs l2-nitro-contracts -f

  # Check bridge logs, ensure that the node is running
  laconic-so deployment --dir bridge-deployment logs nitro-bridge -f
  ```

* Create Nitro node config for users:

  ```bash
  cd /srv/bridge

  # Create required variables
  GETH_CHAIN_ID="11155111"
  OPTIMISM_CHAIN_ID="42069"

  export NA_ADDRESS=$(laconic-so deployment --dir nitro-contracts-deployment exec nitro-contracts "jq -r '.\"$GETH_CHAIN_ID\"[0].contracts.NitroAdjudicator.address' /app/deployment/nitro-addresses.json")
  export CA_ADDRESS=$(laconic-so deployment --dir nitro-contracts-deployment exec nitro-contracts "jq -r '.\"$GETH_CHAIN_ID\"[0].contracts.ConsensusApp.address' /app/deployment/nitro-addresses.json")
  export VPA_ADDRESS=$(laconic-so deployment --dir nitro-contracts-deployment exec nitro-contracts "jq -r '.\"$GETH_CHAIN_ID\"[0].contracts.VirtualPaymentApp.address' /app/deployment/nitro-addresses.json")

  export L1_ASSET_ADDRESS=$(laconic-so deployment --dir nitro-contracts-deployment exec nitro-contracts "jq -r '.\"$GETH_CHAIN_ID\"[0].contracts.Token.address' /app/deployment/nitro-addresses.json")

  export BRIDGE_CONTRACT_ADDRESS=$(laconic-so deployment --dir bridge-deployment exec nitro-bridge "jq -r '.\"$OPTIMISM_CHAIN_ID\"[0].contracts.Bridge.address' /app/deployment/nitro-addresses.json")

  export BRIDGE_NITRO_ADDRESS=$(laconic-so deployment --dir bridge-deployment exec nitro-rpc-client "nitro-rpc-client get-node-info -p 4006 -h nitro-bridge" | jq -r '.SCAddress')

  export BRIDGE_PEER_ID=$(laconic-so deployment --dir bridge-deployment exec nitro-rpc-client "nitro-rpc-client get-node-info -p 4006 -h nitro-bridge" | jq -r '.MessageServicePeerId')

  export L1_BRIDGE_MULTIADDR="/dns4/bridge.laconic.com/tcp/3005/p2p/$BRIDGE_PEER_ID"
  export L2_BRIDGE_MULTIADDR="/dns4/bridge.laconic.com/tcp/3006/p2p/$BRIDGE_PEER_ID"

  # Create the required config file
  cat <<EOF > nitro-node-config.yml
  nitro_l1_chain_url: "wss://sepolia.laconic.com"
  nitro_l2_chain_url: "wss://optimism.laconic.com"
  na_address: "$NA_ADDRESS"
  ca_address: "$CA_ADDRESS"
  vpa_address: "$VPA_ADDRESS"
  l1_asset_address: "${L1_ASSET_ADDRESS}"
  bridge_contract_address: "$BRIDGE_CONTRACT_ADDRESS"
  bridge_nitro_address: "$BRIDGE_NITRO_ADDRESS"
  nitro_l1_bridge_multiaddr: "$L1_BRIDGE_MULTIADDR"
  nitro_l2_bridge_multiaddr: "$L2_BRIDGE_MULTIADDR"
  EOF
  ```

  The required config file should be generated at `/srv/bridge/nitro-node-config.yml`

  Check in the file at location `ops/stage2/nitro-node-config.yml`

</details>

<details open>
  <summary>stage0 laconicd</summary>

## stage0 laconicd

* Stack: <https://git.vdb.to/cerc-io/fixturenet-laconicd-stack/src/branch/main/stack-orchestrator/stacks/fixturenet-laconicd>

* Source repo: <https://git.vdb.to/cerc-io/laconicd>

* Target dir: `/srv/laconicd/stage0-deployment`

* Cleanup an existing deployment if required:

  ```bash
  cd /srv/laconicd

  # Stop the deployment
  laconic-so deployment --dir stage0-deployment stop --delete-volumes

  # Remove the deployment dir
  sudo rm -rf stage0-deployment

  # Remove the existing spec file
  rm stage0-spec.yml
  ```

### Setup

* Clone the stack repo:

  ```bash
  laconic-so fetch-stack git.vdb.to/cerc-io/fixturenet-laconicd-stack --pull

  # This should clone the fixturenet-laconicd-stack repo at `/home/dev/cerc/fixturenet-laconicd-stack`
  ```

* Clone required repositories:

  ```bash
  laconic-so --stack ~/cerc/fixturenet-laconicd-stack/stack-orchestrator/stacks/fixturenet-laconicd setup-repositories --pull

  # This should clone the laconicd repo at `/home/dev/cerc/laconicd`
  ```

* Build the container images:

  ```bash
  laconic-so --stack ~/cerc/fixturenet-laconicd-stack/stack-orchestrator/stacks/fixturenet-laconicd build-containers --force-rebuild

  # This should create the "cerc/laconicd" Docker image
  ```

### Deployment

* Create a spec file for the deployment:

  ```bash
  cd /srv/laconicd

  laconic-so --stack ~/cerc/fixturenet-laconicd-stack/stack-orchestrator/stacks/fixturenet-laconicd deploy init --output stage0-spec.yml
  ```

* Edit network in the spec file to map container ports to host ports:

  ```bash
  # stage0-spec.yml
  network:
    ports:
      laconicd:
        - '6060'
        - '127.0.0.1:26657:26657'
        - '26656'
        - '127.0.0.1:9473:9473'
        - '127.0.0.1:9090:9090'
        - '127.0.0.1:1317:1317'
  ```

* Create a deployment from the spec file:

  ```bash
  laconic-so --stack ~/cerc/fixturenet-laconicd-stack/stack-orchestrator/stacks/fixturenet-laconicd deploy create --spec-file stage0-spec.yml --deployment-dir stage0-deployment
  ```

* Update the configuration:

  ```bash
  cat <<EOF > stage0-deployment/config.env
  # Set to true to enable adding participants functionality of the onboarding module
  ONBOARDING_ENABLED=true

  # A custom human readable name for this node
  MONIKER=LaconicStage0
  EOF
  ```

### Start

* Start the deployment:

  ```bash
  laconic-so deployment --dir stage0-deployment start
  ```

* Check status:

  ```bash
  # List down the containers and check health status
  docker ps -a | grep laconicd

  # Follow logs for laconicd container, check that new blocks are getting created
  laconic-so deployment --dir stage0-deployment logs laconicd -f
  ```

* Verify that endpoint is now publicly accessible:

  * <https://laconicd.laconic.com> is pointed to the node's RPC endpoint

  * Check status query:

    ```bash
    curl https://laconicd.laconic.com/status | jq

    # Expected output:
    # JSON with `node_info`, `sync_info` and `validator_info`
    ```

</details>

<details open>
  <summary>faucet</summary>

## faucet

* Stack: <https://git.vdb.to/cerc-io/testnet-laconicd-stack/src/branch/main/stack-orchestrator/stacks/laconic-faucet>

* Source repo: <https://git.vdb.to/cerc-io/laconic-faucet>

* Target dir: `/srv/faucet/laconic-faucet-deployment`

* Cleanup an existing deployment if required:

  ```bash
  cd /srv/faucet

  # Stop the deployment
  laconic-so deployment --dir laconic-faucet-deployment stop

  # Remove the deployment dir
  sudo rm -rf laconic-faucet-deployment

  # Remove the existing spec file
  rm laconic-faucet-spec.yml
  ```

### Setup

* Clone the stack repo:

  ```bash
  laconic-so fetch-stack git.vdb.to/cerc-io/testnet-laconicd-stack --pull

  # This should clone the testnet-laconicd-stack repo at `/home/dev/cerc/testnet-laconicd-stack`
  ```

* Clone required repositories:

  ```bash
  laconic-so --stack ~/cerc/testnet-laconicd-stack/stack-orchestrator/stacks/laconic-faucet setup-repositories --pull

  # This should clone the laconicd repo at `/home/dev/cerc/laconic-faucet
  ```

* Build the container images:

  ```bash
  laconic-so --stack ~/cerc/testnet-laconicd-stack/stack-orchestrator/stacks/laconic-faucet build-containers --force-rebuild

  # This should create the "cerc/laconic-faucet" Docker image
  ```

### Deployment

* Create a spec file for the deployment:

  ```bash
  cd /srv/faucet

  laconic-so --stack ~/cerc/testnet-laconicd-stack/stack-orchestrator/stacks/laconic-faucet deploy init --output laconic-faucet-spec.yml
  ```

* Edit network in the spec file to map container ports to host ports:

  ```bash
  # laconic-faucet-spec.yml
  network:
    ports:
      faucet:
        - '127.0.0.1:4000:3000'
  ```

* Create a deployment from the spec file:

  ```bash
  laconic-so --stack ~/cerc/testnet-laconicd-stack/stack-orchestrator/stacks/laconic-faucet deploy create --spec-file laconic-faucet-spec.yml --deployment-dir laconic-faucet-deployment

  # Place in the same namespace as stage0
  cp /srv/laconicd/stage0-deployment/deployment.yml laconic-faucet-deployment/deployment.yml
  ```

* Update the configuration:

  ```bash
  # Get the faucet account key from stage0 deployment
  export FAUCET_ACCOUNT_PK=$(laconic-so deployment --dir /srv/laconicd/stage0-deployment exec laconicd "echo y | laconicd keys export alice --keyring-backend test --unarmored-hex --unsafe")

  cat <<EOF > laconic-faucet-deployment/config.env
  CERC_FAUCET_KEY=$FAUCET_ACCOUNT_PK
  EOF
  ```

### Start

* Start the deployment:

  ```bash
  laconic-so deployment --dir laconic-faucet-deployment start
  ```

* Check status:

  ```bash
  # List down the containers and check health status
  docker ps -a | grep faucet

  # Check logs for faucet container
  laconic-so deployment --dir laconic-faucet-deployment logs faucet -f
  ```

* Verify that endpoint is now publicly accessible:

  * <https://faucet.laconic.com> is pointed to the faucet endpoint

  * Check faucet:

    ```bash
    curl -X POST https://faucet.laconic.com/faucet

    # Expected output:
    # {"error":"address is required"}
    ```

</details>

<details open>
  <summary>testnet-onboarding-app</summary>

## testnet-onboarding-app

* Stack: <https://git.vdb.to/cerc-io/testnet-onboarding-app-stack/src/branch/main/stack-orchestrator/stacks/onboarding-app>

* Source repo: <https://git.vdb.to/cerc-io/testnet-onboarding-app>

* Target dir: `/srv/app/onboarding-app-deployment`

* Cleanup an existing deployment if required:

  ```bash
  cd /srv/app

  # Stop the deployment
  laconic-so deployment --dir onboarding-app-deployment

  # Remove the deployment dir
  sudo rm -rf onboarding-app-deployment

  # Remove the existing spec file
  rm onboarding-app-spec.yml
  ```

### Setup

* Clone the stack repo:

  ```bash
  laconic-so fetch-stack git.vdb.to/cerc-io/testnet-onboarding-app-stack --pull

  # This should clone the testnet-onboarding-app-stack repo at `/home/dev/cerc/testnet-onboarding-app-stack`
  ```

* Clone required repositories:

  ```bash
  laconic-so --stack ~/cerc/testnet-onboarding-app-stack/stack-orchestrator/stacks/onboarding-app setup-repositories --pull

  # This should clone the testnet-onboarding-app repo at `/home/dev/cerc/testnet-onboarding-app`
  ```

* Build the container images:

  ```bash
  laconic-so --stack ~/cerc/testnet-onboarding-app-stack/stack-orchestrator/stacks/onboarding-app build-containers --force-rebuild

  # This should create the Docker image "cerc/testnet-onboarding-app" locally
  ```

### Deployment

* Create a spec file for the deployment:

  ```bash
  cd /srv/app

  laconic-so --stack ~/cerc/testnet-onboarding-app-stack/stack-orchestrator/stacks/onboarding-app deploy init --output onboarding-app-spec.yml
  ```

* Edit network in the spec file to map container ports to host ports:

  ```bash
  network:
    ports:
      testnet-onboarding-app:
        - '127.0.0.1:3000:80'
  ```

* Create a deployment from the spec file:

  ```bash
  laconic-so --stack ~/cerc/testnet-onboarding-app-stack/stack-orchestrator/stacks/onboarding-app deploy create --spec-file onboarding-app-spec.yml --deployment-dir onboarding-app-deployment
  ```

* Update the configuration:

  ```bash
  cat <<EOF > onboarding-app-deployment/config.env
  WALLET_CONNECT_ID=63...

  CERC_REGISTRY_GQL_ENDPOINT="https://laconicd.laconic.com/api"
  CERC_LACONICD_RPC_ENDPOINT="https://laconicd.laconic.com"

  CERC_FAUCET_ENDPOINT="https://faucet.laconic.com"

  CERC_WALLET_META_URL="https://loro-signup.laconic.com"
  EOF
  ```

### Start

* Start the deployment:

  ```bash
  laconic-so deployment --dir onboarding-app-deployment start
  ```

* Check status:

  ```bash
  # List down the container
  docker ps -a | grep testnet-onboarding-app

  # Follow logs for testnet-onboarding-app container, wait for the build to finish
  laconic-so deployment --dir onboarding-app-deployment logs testnet-onboarding-app -f
  ```

* The onboarding app can now be viewed at <https://loro-signup.laconic.com>

</details>

<details open>
  <summary>laconic-wallet-web</summary>

## laconic-wallet-web

* Stack: <https://git.vdb.to/cerc-io/laconic-wallet-web/src/branch/main/stack/stack-orchestrator/stack/laconic-wallet-web>

* Source repo: <https://git.vdb.to/cerc-io/laconic-wallet-web>

* Target dir: `/srv/wallet/laconic-wallet-web-deployment`

* Cleanup an existing deployment if required:

  ```bash
  cd /srv/wallet

  # Stop the deployment
  laconic-so deployment --dir laconic-wallet-web-deployment

  # Remove the deployment dir
  sudo rm -rf laconic-wallet-web-deployment

  # Remove the existing spec file
  rm laconic-wallet-web-spec.yml
  ```

### Setup

* Clone the stack repo:

  ```bash
  laconic-so fetch-stack git.vdb.to/cerc-io/laconic-wallet-web --pull

  # This should clone the laconic-wallet-web repo at `/home/dev/cerc/laconic-wallet-web`
  ```

* Build the container images:

  ```bash
  laconic-so --stack ~/cerc/laconic-wallet-web/stack/stack-orchestrator/stack/laconic-wallet-web build-containers --force-rebuild

  # This should create the Docker image "cerc/laconic-wallet-web" locally
  ```

### Deployment

* Create a spec file for the deployment:

  ```bash
  cd /srv/wallet

  laconic-so --stack ~/cerc/laconic-wallet-web/stack/stack-orchestrator/stack/laconic-wallet-web deploy init --output laconic-wallet-web-spec.yml
  ```

* Edit network in the spec file to map container ports to host ports:

  ```bash
  network:
    ports:
      laconic-wallet-web:
        - '127.0.0.1:5000:80'
  ```

* Create a deployment from the spec file:

  ```bash
  laconic-so --stack ~/cerc/laconic-wallet-web/stack/stack-orchestrator/stack/laconic-wallet-web deploy create --spec-file laconic-wallet-web-spec.yml --deployment-dir laconic-wallet-web-deployment
  ```

* Update the configuration:

  ```bash
  cat <<EOF > laconic-wallet-web-deployment/config.env
  WALLET_CONNECT_ID=63...
  EOF
  ```

### Start

* Start the deployment:

  ```bash
  laconic-so deployment --dir laconic-wallet-web-deployment start
  ```

* Check status:

  ```bash
  # List down the container
  docker ps -a | grep laconic-wallet-web

  # Follow logs for laconic-wallet-web container, wait for the build to finish
  laconic-so deployment --dir laconic-wallet-web-deployment logs laconic-wallet-web -f
  ```

* The web wallet can now be viewed at <https://wallet.laconic.com>

</details>

<details open>
  <summary>stage1 laconicd</summary>

## stage1 laconicd

* Stack: <https://git.vdb.to/cerc-io/fixturenet-laconicd-stack/src/branch/main/stack-orchestrator/stacks/fixturenet-laconicd>

* Source repo: <https://git.vdb.to/cerc-io/laconicd>

* Target dir: `/srv/laconicd/stage1-deployment`

* Cleanup an existing deployment if required:

  ```bash
  cd /srv/laconicd

  # Stop the deployment
  laconic-so deployment --dir stage1-deployment stop --delete-volumes

  # Remove the deployment dir
  sudo rm -rf stage1-deployment

  # Remove the existing spec file
  rm stage1-spec.yml
  ```

### Setup

* Same as that for [stage0 laconicd](#setup), not required if already done for stage0

### Deployment

* Create a spec file for the deployment:

  ```bash
  cd /srv/laconicd

  laconic-so --stack ~/cerc/fixturenet-laconicd-stack/stack-orchestrator/stacks/fixturenet-laconicd deploy init --output stage1-spec.yml
  ```

* Edit network in the spec file to map container ports to host ports:

  ```bash
  # stage1-spec.yml
  network:
    ports:
      laconicd:
        - '6060'
        - '127.0.0.1:26657:26657'
        - '26656:26656'
        - '127.0.0.1:9473:9473'
        - '127.0.0.1:9090:9090'
        - '127.0.0.1:1317:1317'
  ```

* Create a deployment from the spec file:

  ```bash
  laconic-so --stack ~/cerc/fixturenet-laconicd-stack/stack-orchestrator/stacks/fixturenet-laconicd deploy create --spec-file stage1-spec.yml --deployment-dir stage1-deployment
  ```

* Update the configuration:

  ```bash
  cat <<EOF > stage1-deployment/config.env
  AUTHORITY_AUCTION_ENABLED=true
  AUTHORITY_AUCTION_COMMITS_DURATION=3600
  AUTHORITY_AUCTION_REVEALS_DURATION=3600
  AUTHORITY_GRACE_PERIOD=7200

  MONIKER=LaconicStage1
  EOF
  ```

### Start

* Follow [stage0-to-stage1.md](./stage0-to-stage1.md) to halt stage0 deployment, generate the genesis file for stage1 and start the stage1 deployment

</details>

<details open>
  <summary>laconic-console</summary>

## laconic-console

* Stack: <https://git.vdb.to/cerc-io/testnet-laconicd-stack/src/branch/main/stack-orchestrator/stacks/laconic-console>

* Source repos:
  * <https://git.vdb.to/cerc-io/laconic-registry-cli>
  * <https://git.vdb.to/cerc-io/laconic-console>

* Target dir: `/srv/console/laconic-console-deployment`

* Cleanup an existing deployment if required:

  ```bash
  cd /srv/console

  # Stop the deployment
  laconic-so deployment --dir laconic-console-deployment stop --delete-volumes

  # Remove the deployment dir
  sudo rm -rf laconic-console-deployment

  # Remove the existing spec file
  rm laconic-console-spec.yml
  ```

### Setup

* Clone the stack repo:

  ```bash
  laconic-so fetch-stack git.vdb.to/cerc-io/testnet-laconicd-stack --pull

  # This should clone the testnet-laconicd-stack repo at `/home/dev/cerc/testnet-laconicd-stack`
  ```

* Clone required repositories:

  ```bash
  laconic-so --stack ~/cerc/testnet-laconicd-stack/stack-orchestrator/stacks/laconic-console setup-repositories --pull

  # This should clone the laconic-registry-cli repo at `/home/dev/cerc/laconic-registry-cli`, laconic-console repo at `/home/dev/cerc/laconic-console`
  ```

* Build the container images:

  ```bash
  laconic-so --stack ~/cerc/testnet-laconicd-stack/stack-orchestrator/stacks/laconic-console build-containers --force-rebuild

  # This should create the Docker images: "cerc/laconic-registry-cli", "cerc/webapp-base", "cerc/laconic-console-host"
  ```

### Deployment

* Create a spec file for the deployment:

  ```bash
  cd /srv/console

  laconic-so --stack ~/cerc/testnet-laconicd-stack/stack-orchestrator/stacks/laconic-console deploy init --output laconic-console-spec.yml
  ```

* Edit network in the spec file to map container ports to host ports:

  ```bash
  network:
    ports:
      console:
        - '127.0.0.1:4001:80'
  ```

* Create a deployment from the spec file:

  ```bash
  laconic-so --stack ~/cerc/testnet-laconicd-stack/stack-orchestrator/stacks/laconic-console deploy create --spec-file laconic-console-spec.yml --deployment-dir laconic-console-deployment
  ```

* Update the configuration:

  ```bash
  cat <<EOF > laconic-console-deployment/config.env
  # Laconicd (hosted) GQL endpoint
  LACONIC_HOSTED_ENDPOINT=https://laconicd.laconic.com
  EOF
  ```

### Start

* Start the deployment:

  ```bash
  laconic-so deployment --dir laconic-console-deployment start
  ```

* Check status:

  ```bash
  # List down the container
  docker ps -a | grep console

  # Follow logs for console container
  laconic-so deployment --dir laconic-console-deployment logs console -f
  ```

* The laconic console can now be viewed at <https://loro-console.laconic.com>

</details>

## Domains / Port Mappings

```bash
# Machine 1
https://laconicd.laconic.com        -> 26657
https://laconicd.laconic.com/api    -> 9473/api
https://faucet.laconic.com          -> 4000
https://loro-signup.laconic.com     -> 3000
https://wallet.laconic.com          -> 5000
https://loro-console.laconic.com    -> 4001


# Machine 2
https://sepolia.laconic.com   -> 8545
wss://sepolia.laconic.com     -> 8546
https://optimism.laconic.com  -> 9545
wss://optimism.laconic.com    -> 9546

bridge.laconic.com
Open ports:
3005 (L1 side)
3006 (L2 side)
```