.. index:: ! inheritance, ! base class, ! contract;base, ! deriving *********** Inheritance *********** Solidity supports multiple inheritance including polymorphism. Polymorphism means that a function call (internal and external) always executes the function of the same name (and parameter types) in the most derived contract in the inheritance hierarchy. This has to be explicitly enabled on each function in the hierarchy using the ``virtual`` and ``override`` keywords. See :ref:`Function Overriding ` for more details. It is possible to call functions further up in the inheritance hierarchy internally by explicitly specifying the contract using ``ContractName.functionName()`` or using ``super.functionName()`` if you want to call the function one level higher up in the flattened inheritance hierarchy (see below). When a contract inherits from other contracts, only a single contract is created on the blockchain, and the code from all the base contracts is compiled into the created contract. This means that all internal calls to functions of base contracts also just use internal function calls (``super.f(..)`` will use JUMP and not a message call). State variable shadowing is considered as an error. A derived contract can only declare a state variable ``x``, if there is no visible state variable with the same name in any of its bases. The general inheritance system is very similar to `Python's `_, especially concerning multiple inheritance, but there are also some :ref:`differences `. Details are given in the following example. .. code-block:: solidity // SPDX-License-Identifier: GPL-3.0 pragma solidity >=0.7.0 <0.9.0; contract Owned { constructor() { owner = payable(msg.sender); } address payable owner; } // Use `is` to derive from another contract. Derived // contracts can access all non-private members including // internal functions and state variables. These cannot be // accessed externally via `this`, though. contract Destructible is Owned { // The keyword `virtual` means that the function can change // its behaviour in derived classes ("overriding"). function destroy() virtual public { if (msg.sender == owner) selfdestruct(owner); } } // These abstract contracts are only provided to make the // interface known to the compiler. Note the function // without body. If a contract does not implement all // functions it can only be used as an interface. abstract contract Config { function lookup(uint id) public virtual returns (address adr); } abstract contract NameReg { function register(bytes32 name) public virtual; function unregister() public virtual; } // Multiple inheritance is possible. Note that `Owned` is // also a base class of `Destructible`, yet there is only a single // instance of `Owned` (as for virtual inheritance in C++). contract Named is Owned, Destructible { constructor(bytes32 name) { Config config = Config(0xD5f9D8D94886E70b06E474c3fB14Fd43E2f23970); NameReg(config.lookup(1)).register(name); } // Functions can be overridden by another function with the same name and // the same number/types of inputs. If the overriding function has different // types of output parameters, that causes an error. // Both local and message-based function calls take these overrides // into account. // If you want the function to override, you need to use the // `override` keyword. You need to specify the `virtual` keyword again // if you want this function to be overridden again. function destroy() public virtual override { if (msg.sender == owner) { Config config = Config(0xD5f9D8D94886E70b06E474c3fB14Fd43E2f23970); NameReg(config.lookup(1)).unregister(); // It is still possible to call a specific // overridden function. Destructible.destroy(); } } } // If a constructor takes an argument, it needs to be // provided in the header or modifier-invocation-style at // the constructor of the derived contract (see below). contract PriceFeed is Owned, Destructible, Named("GoldFeed") { function updateInfo(uint newInfo) public { if (msg.sender == owner) info = newInfo; } // Here, we only specify `override` and not `virtual`. // This means that contracts deriving from `PriceFeed` // cannot change the behaviour of `destroy` anymore. function destroy() public override(Destructible, Named) { Named.destroy(); } function get() public view returns(uint r) { return info; } uint info; } Note that above, we call ``Destructible.destroy()`` to "forward" the destruction request. The way this is done is problematic, as seen in the following example: .. code-block:: solidity // SPDX-License-Identifier: GPL-3.0 pragma solidity >=0.7.0 <0.9.0; contract owned { constructor() { owner = payable(msg.sender); } address payable owner; } contract Destructible is owned { function destroy() public virtual { if (msg.sender == owner) selfdestruct(owner); } } contract Base1 is Destructible { function destroy() public virtual override { /* do cleanup 1 */ Destructible.destroy(); } } contract Base2 is Destructible { function destroy() public virtual override { /* do cleanup 2 */ Destructible.destroy(); } } contract Final is Base1, Base2 { function destroy() public override(Base1, Base2) { Base2.destroy(); } } A call to ``Final.destroy()`` will call ``Base2.destroy`` because we specify it explicitly in the final override, but this function will bypass ``Base1.destroy``. The way around this is to use ``super``: .. code-block:: solidity // SPDX-License-Identifier: GPL-3.0 pragma solidity >=0.7.0 <0.9.0; contract owned { constructor() { owner = payable(msg.sender); } address payable owner; } contract Destructible is owned { function destroy() virtual public { if (msg.sender == owner) selfdestruct(owner); } } contract Base1 is Destructible { function destroy() public virtual override { /* do cleanup 1 */ super.destroy(); } } contract Base2 is Destructible { function destroy() public virtual override { /* do cleanup 2 */ super.destroy(); } } contract Final is Base1, Base2 { function destroy() public override(Base1, Base2) { super.destroy(); } } If ``Base2`` calls a function of ``super``, it does not simply call this function on one of its base contracts. Rather, it calls this function on the next base contract in the final inheritance graph, so it will call ``Base1.destroy()`` (note that the final inheritance sequence is -- starting with the most derived contract: Final, Base2, Base1, Destructible, owned). The actual function that is called when using super is not known in the context of the class where it is used, although its type is known. This is similar for ordinary virtual method lookup. .. index:: ! overriding;function .. _function-overriding: Function Overriding =================== Base functions can be overridden by inheriting contracts to change their behavior if they are marked as ``virtual``. The overriding function must then use the ``override`` keyword in the function header. The overriding function may only change the visibility of the overridden function from ``external`` to ``public``. The mutability may be changed to a more strict one following the order: ``nonpayable`` can be overridden by ``view`` and ``pure``. ``view`` can be overridden by ``pure``. ``payable`` is an exception and cannot be changed to any other mutability. The following example demonstrates changing mutability and visibility: .. code-block:: solidity // SPDX-License-Identifier: GPL-3.0 pragma solidity >=0.7.0 <0.9.0; contract Base { function foo() virtual external view {} } contract Middle is Base {} contract Inherited is Middle { function foo() override public pure {} } For multiple inheritance, the most derived base contracts that define the same function must be specified explicitly after the ``override`` keyword. In other words, you have to specify all base contracts that define the same function and have not yet been overridden by another base contract (on some path through the inheritance graph). Additionally, if a contract inherits the same function from multiple (unrelated) bases, it has to explicitly override it: .. code-block:: solidity // SPDX-License-Identifier: GPL-3.0 pragma solidity >=0.6.0 <0.9.0; contract Base1 { function foo() virtual public {} } contract Base2 { function foo() virtual public {} } contract Inherited is Base1, Base2 { // Derives from multiple bases defining foo(), so we must explicitly // override it function foo() public override(Base1, Base2) {} } An explicit override specifier is not required if the function is defined in a common base contract or if there is a unique function in a common base contract that already overrides all other functions. .. code-block:: solidity // SPDX-License-Identifier: GPL-3.0 pragma solidity >=0.6.0 <0.9.0; contract A { function f() public pure{} } contract B is A {} contract C is A {} // No explicit override required contract D is B, C {} More formally, it is not required to override a function (directly or indirectly) inherited from multiple bases if there is a base contract that is part of all override paths for the signature, and (1) that base implements the function and no paths from the current contract to the base mentions a function with that signature or (2) that base does not implement the function and there is at most one mention of the function in all paths from the current contract to that base. In this sense, an override path for a signature is a path through the inheritance graph that starts at the contract under consideration and ends at a contract mentioning a function with that signature that does not override. If you do not mark a function that overrides as ``virtual``, derived contracts can no longer change the behaviour of that function. .. note:: Functions with the ``private`` visibility cannot be ``virtual``. .. note:: Functions without implementation have to be marked ``virtual`` outside of interfaces. In interfaces, all functions are automatically considered ``virtual``. .. note:: Starting from Solidity 0.8.8, the ``override`` keyword is not required when overriding an interface function, except for the case where the function is defined in multiple bases. Public state variables can override external functions if the parameter and return types of the function matches the getter function of the variable: .. code-block:: solidity // SPDX-License-Identifier: GPL-3.0 pragma solidity >=0.6.0 <0.9.0; contract A { function f() external view virtual returns(uint) { return 5; } } contract B is A { uint public override f; } .. note:: While public state variables can override external functions, they themselves cannot be overridden. .. index:: ! overriding;modifier .. _modifier-overriding: Modifier Overriding =================== Function modifiers can override each other. This works in the same way as :ref:`function overriding ` (except that there is no overloading for modifiers). The ``virtual`` keyword must be used on the overridden modifier and the ``override`` keyword must be used in the overriding modifier: .. code-block:: solidity // SPDX-License-Identifier: GPL-3.0 pragma solidity >=0.6.0 <0.9.0; contract Base { modifier foo() virtual {_;} } contract Inherited is Base { modifier foo() override {_;} } In case of multiple inheritance, all direct base contracts must be specified explicitly: .. code-block:: solidity // SPDX-License-Identifier: GPL-3.0 pragma solidity >=0.6.0 <0.9.0; contract Base1 { modifier foo() virtual {_;} } contract Base2 { modifier foo() virtual {_;} } contract Inherited is Base1, Base2 { modifier foo() override(Base1, Base2) {_;} } .. index:: ! constructor .. _constructor: Constructors ============ A constructor is an optional function declared with the ``constructor`` keyword which is executed upon contract creation, and where you can run contract initialisation code. Before the constructor code is executed, state variables are initialised to their specified value if you initialise them inline, or their :ref:`default value` if you do not. After the constructor has run, the final code of the contract is deployed to the blockchain. The deployment of the code costs additional gas linear to the length of the code. This code includes all functions that are part of the public interface and all functions that are reachable from there through function calls. It does not include the constructor code or internal functions that are only called from the constructor. If there is no constructor, the contract will assume the default constructor, which is equivalent to ``constructor() {}``. For example: .. code-block:: solidity // SPDX-License-Identifier: GPL-3.0 pragma solidity >=0.7.0 <0.9.0; abstract contract A { uint public a; constructor(uint a_) { a = a_; } } contract B is A(1) { constructor() {} } You can use internal parameters in a constructor (for example storage pointers). In this case, the contract has to be marked :ref:`abstract `, because these parameters cannot be assigned valid values from outside but only through the constructors of derived contracts. .. warning :: Prior to version 0.4.22, constructors were defined as functions with the same name as the contract. This syntax was deprecated and is not allowed anymore in version 0.5.0. .. warning :: Prior to version 0.7.0, you had to specify the visibility of constructors as either ``internal`` or ``public``. .. index:: ! base;constructor, inheritance list, contract;abstract, abstract contract Arguments for Base Constructors =============================== The constructors of all the base contracts will be called following the linearization rules explained below. If the base constructors have arguments, derived contracts need to specify all of them. This can be done in two ways: .. code-block:: solidity // SPDX-License-Identifier: GPL-3.0 pragma solidity >=0.7.0 <0.9.0; contract Base { uint x; constructor(uint x_) { x = x_; } } // Either directly specify in the inheritance list... contract Derived1 is Base(7) { constructor() {} } // or through a "modifier" of the derived constructor... contract Derived2 is Base { constructor(uint y) Base(y * y) {} } // or declare abstract... abstract contract Derived3 is Base { } // and have the next concrete derived contract initialize it. contract DerivedFromDerived is Derived3 { constructor() Base(10 + 10) {} } One way is directly in the inheritance list (``is Base(7)``). The other is in the way a modifier is invoked as part of the derived constructor (``Base(y * y)``). The first way to do it is more convenient if the constructor argument is a constant and defines the behaviour of the contract or describes it. The second way has to be used if the constructor arguments of the base depend on those of the derived contract. Arguments have to be given either in the inheritance list or in modifier-style in the derived constructor. Specifying arguments in both places is an error. If a derived contract does not specify the arguments to all of its base contracts' constructors, it must be declared abstract. In that case, when another contract derives from it, that other contract's inheritance list or constructor must provide the necessary parameters for all base classes that haven't had their parameters specified (otherwise, that other contract must be declared abstract as well). For example, in the above code snippet, see ``Derived3`` and ``DerivedFromDerived``. .. index:: ! inheritance;multiple, ! linearization, ! C3 linearization .. _multi-inheritance: Multiple Inheritance and Linearization ====================================== Languages that allow multiple inheritance have to deal with several problems. One is the `Diamond Problem `_. Solidity is similar to Python in that it uses "`C3 Linearization `_" to force a specific order in the directed acyclic graph (DAG) of base classes. This results in the desirable property of monotonicity but disallows some inheritance graphs. Especially, the order in which the base classes are given in the ``is`` directive is important: You have to list the direct base contracts in the order from "most base-like" to "most derived". Note that this order is the reverse of the one used in Python. Another simplifying way to explain this is that when a function is called that is defined multiple times in different contracts, the given bases are searched from right to left (left to right in Python) in a depth-first manner, stopping at the first match. If a base contract has already been searched, it is skipped. In the following code, Solidity will give the error "Linearization of inheritance graph impossible". .. code-block:: solidity // SPDX-License-Identifier: GPL-3.0 pragma solidity >=0.4.0 <0.9.0; contract X {} contract A is X {} // This will not compile contract C is A, X {} The reason for this is that ``C`` requests ``X`` to override ``A`` (by specifying ``A, X`` in this order), but ``A`` itself requests to override ``X``, which is a contradiction that cannot be resolved. Due to the fact that you have to explicitly override a function that is inherited from multiple bases without a unique override, C3 linearization is not too important in practice. One area where inheritance linearization is especially important and perhaps not as clear is when there are multiple constructors in the inheritance hierarchy. The constructors will always be executed in the linearized order, regardless of the order in which their arguments are provided in the inheriting contract's constructor. For example: .. code-block:: solidity // SPDX-License-Identifier: GPL-3.0 pragma solidity >=0.7.0 <0.9.0; contract Base1 { constructor() {} } contract Base2 { constructor() {} } // Constructors are executed in the following order: // 1 - Base1 // 2 - Base2 // 3 - Derived1 contract Derived1 is Base1, Base2 { constructor() Base1() Base2() {} } // Constructors are executed in the following order: // 1 - Base2 // 2 - Base1 // 3 - Derived2 contract Derived2 is Base2, Base1 { constructor() Base2() Base1() {} } // Constructors are still executed in the following order: // 1 - Base2 // 2 - Base1 // 3 - Derived3 contract Derived3 is Base2, Base1 { constructor() Base1() Base2() {} } Inheriting Different Kinds of Members of the Same Name ====================================================== It is an error when any of the following pairs in a contract have the same name due to inheritance: - a function and a modifier - a function and an event - an event and a modifier As an exception, a state variable getter can override an external function.