.. index:: optimizer, optimiser, common subexpression elimination, constant propagation .. _optimizer: ************* The Optimizer ************* The Solidity compiler uses two different optimizer modules: The "old" optimizer that operates at the opcode level and the "new" optimizer that operates on Yul IR code. The opcode-based optimizer applies a set of `simplification rules `_ to opcodes. It also combines equal code sets and removes unused code. The Yul-based optimizer is much more powerful, because it can work across function calls. For example, arbitrary jumps are not possible in Yul, so it is possible to compute the side-effects of each function. Consider two function calls, where the first does not modify storage and the second does modify storage. If their arguments and return values do not depend on each other, we can reorder the function calls. Similarly, if a function is side-effect free and its result is multiplied by zero, you can remove the function call completely. Currently, the parameter ``--optimize`` activates the opcode-based optimizer for the generated bytecode and the Yul optimizer for the Yul code generated internally, for example for ABI coder v2. One can use ``solc --ir-optimized --optimize`` to produce an optimized Yul IR for a Solidity source. Similarly, one can use ``solc --strict-assembly --optimize`` for a stand-alone Yul mode. You can find more details on both optimizer modules and their optimization steps below. Benefits of Optimizing Solidity Code ==================================== Overall, the optimizer tries to simplify complicated expressions, which reduces both code size and execution cost, i.e., it can reduce gas needed for contract deployment as well as for external calls made to the contract. It also specializes or inlines functions. Especially function inlining is an operation that can cause much bigger code, but it is often done because it results in opportunities for more simplifications. Differences between Optimized and Non-Optimized Code ==================================================== Generally, the most visible difference is that constant expressions are evaluated at compile time. When it comes to the ASM output, one can also notice a reduction of equivalent or duplicate code blocks (compare the output of the flags ``--asm`` and ``--asm --optimize``). However, when it comes to the Yul/intermediate-representation, there can be significant differences, for example, functions may be inlined, combined, or rewritten to eliminate redundancies, etc. (compare the output between the flags ``--ir`` and ``--optimize --ir-optimized``). .. _optimizer-parameter-runs: Optimizer Parameter Runs ======================== The number of runs (``--optimize-runs``) specifies roughly how often each opcode of the deployed code will be executed across the life-time of the contract. This means it is a trade-off parameter between code size (deploy cost) and code execution cost (cost after deployment). A "runs" parameter of "1" will produce short but expensive code. In contrast, a larger "runs" parameter will produce longer but more gas efficient code. The maximum value of the parameter is ``2**32-1``. .. note:: A common misconception is that this parameter specifies the number of iterations of the optimizer. This is not true: The optimizer will always run as many times as it can still improve the code. Opcode-Based Optimizer Module ============================= The opcode-based optimizer module operates on assembly code. It splits the sequence of instructions into basic blocks at ``JUMPs`` and ``JUMPDESTs``. Inside these blocks, the optimizer analyzes the instructions and records every modification to the stack, memory, or storage as an expression which consists of an instruction and a list of arguments which are pointers to other expressions. Additionally, the opcode-based optimizer uses a component called "CommonSubexpressionEliminator" that, amongst other tasks, finds expressions that are always equal (on every input) and combines them into an expression class. It first tries to find each new expression in a list of already known expressions. If no such matches are found, it simplifies the expression according to rules like ``constant + constant = sum_of_constants`` or ``X * 1 = X``. Since this is a recursive process, we can also apply the latter rule if the second factor is a more complex expression which we know always evaluates to one. Certain optimizer steps symbolically track the storage and memory locations. For example, this information is used to compute Keccak-256 hashes that can be evaluated during compile time. Consider the sequence: .. code-block:: none PUSH 32 PUSH 0 CALLDATALOAD PUSH 100 DUP2 MSTORE KECCAK256 or the equivalent Yul .. code-block:: yul let x := calldataload(0) mstore(x, 100) let value := keccak256(x, 32) In this case, the optimizer tracks the value at a memory location ``calldataload(0)`` and then realizes that the Keccak-256 hash can be evaluated at compile time. This only works if there is no other instruction that modifies memory between the ``mstore`` and ``keccak256``. So if there is an instruction that writes to memory (or storage), then we need to erase the knowledge of the current memory (or storage). There is, however, an exception to this erasing, when we can easily see that the instruction doesn't write to a certain location. For example, .. code-block:: yul let x := calldataload(0) mstore(x, 100) // Current knowledge memory location x -> 100 let y := add(x, 32) // Does not clear the knowledge that x -> 100, since y does not write to [x, x + 32) mstore(y, 200) // This Keccak-256 can now be evaluated let value := keccak256(x, 32) Therefore, modifications to storage and memory locations, of say location ``l``, must erase knowledge about storage or memory locations which may be equal to ``l``. More specifically, for storage, the optimizer has to erase all knowledge of symbolic locations, that may be equal to ``l`` and for memory, the optimizer has to erase all knowledge of symbolic locations that may not be at least 32 bytes away. If ``m`` denotes an arbitrary location, then this decision on erasure is done by computing the value ``sub(l, m)``. For storage, if this value evaluates to a literal that is non-zero, then the knowledge about ``m`` will be kept. For memory, if the value evaluates to a literal that is between ``32`` and ``2**256 - 32``, then the knowledge about ``m`` will be kept. In all other cases, the knowledge about ``m`` will be erased. After this process, we know which expressions have to be on the stack at the end, and have a list of modifications to memory and storage. This information is stored together with the basic blocks and is used to link them. Furthermore, knowledge about the stack, storage and memory configuration is forwarded to the next block(s). If we know the targets of all ``JUMP`` and ``JUMPI`` instructions, we can build a complete control flow graph of the program. If there is only one target we do not know (this can happen as in principle, jump targets can be computed from inputs), we have to erase all knowledge about the input state of a block as it can be the target of the unknown ``JUMP``. If the opcode-based optimizer module finds a ``JUMPI`` whose condition evaluates to a constant, it transforms it to an unconditional jump. As the last step, the code in each block is re-generated. The optimizer creates a dependency graph from the expressions on the stack at the end of the block, and it drops every operation that is not part of this graph. It generates code that applies the modifications to memory and storage in the order they were made in the original code (dropping modifications which were found not to be needed). Finally, it generates all values that are required to be on the stack in the correct place. These steps are applied to each basic block and the newly generated code is used as replacement if it is smaller. If a basic block is split at a ``JUMPI`` and during the analysis, the condition evaluates to a constant, the ``JUMPI`` is replaced based on the value of the constant. Thus code like .. code-block:: solidity uint x = 7; data[7] = 9; if (data[x] != x + 2) // this condition is never true return 2; else return 1; simplifies to this: .. code-block:: solidity data[7] = 9; return 1; Simple Inlining --------------- Since Solidity version 0.8.2, there is another optimizer step that replaces certain jumps to blocks containing "simple" instructions ending with a "jump" by a copy of these instructions. This corresponds to inlining of simple, small Solidity or Yul functions. In particular, the sequence ``PUSHTAG(tag) JUMP`` may be replaced, whenever the ``JUMP`` is marked as jump "into" a function and behind ``tag`` there is a basic block (as described above for the "CommonSubexpressionEliminator") that ends in another ``JUMP`` which is marked as a jump "out of" a function. In particular, consider the following prototypical example of assembly generated for a call to an internal Solidity function: .. code-block:: text tag_return tag_f jump // in tag_return: ...opcodes after call to f... tag_f: ...body of function f... jump // out As long as the body of the function is a continuous basic block, the "Inliner" can replace ``tag_f jump`` by the block at ``tag_f`` resulting in: .. code-block:: text tag_return ...body of function f... jump tag_return: ...opcodes after call to f... tag_f: ...body of function f... jump // out Now ideally, the other optimizer steps described above will result in the return tag push being moved towards the remaining jump resulting in: .. code-block:: text ...body of function f... tag_return jump tag_return: ...opcodes after call to f... tag_f: ...body of function f... jump // out In this situation the "PeepholeOptimizer" will remove the return jump. Ideally, all of this can be done for all references to ``tag_f`` leaving it unused, s.t. it can be removed, yielding: .. code-block:: text ...body of function f... ...opcodes after call to f... So the call to function ``f`` is inlined and the original definition of ``f`` can be removed. Inlining like this is attempted, whenever a heuristics suggests that inlining is cheaper over the lifetime of a contract than not inlining. This heuristics depends on the size of the function body, the number of other references to its tag (approximating the number of calls to the function) and the expected number of executions of the contract (the global optimizer parameter "runs"). Yul-Based Optimizer Module ========================== The Yul-based optimizer consists of several stages and components that all transform the AST in a semantically equivalent way. The goal is to end up either with code that is shorter or at least only marginally longer but will allow further optimization steps. .. warning:: Since the optimizer is under heavy development, the information here might be outdated. If you rely on a certain functionality, please reach out to the team directly. The optimizer currently follows a purely greedy strategy and does not do any backtracking. All components of the Yul-based optimizer module are explained below. The following transformation steps are the main components: - SSA Transform - Common Subexpression Eliminator - Expression Simplifier - Redundant Assign Eliminator - Full Inliner Optimizer Steps --------------- This is a list of all steps the Yul-based optimizer sorted alphabetically. You can find more information on the individual steps and their sequence below. - :ref:`block-flattener`. - :ref:`circular-reference-pruner`. - :ref:`common-subexpression-eliminator`. - :ref:`conditional-simplifier`. - :ref:`conditional-unsimplifier`. - :ref:`control-flow-simplifier`. - :ref:`dead-code-eliminator`. - :ref:`equal-store-eliminator`. - :ref:`equivalent-function-combiner`. - :ref:`expression-joiner`. - :ref:`expression-simplifier`. - :ref:`expression-splitter`. - :ref:`for-loop-condition-into-body`. - :ref:`for-loop-condition-out-of-body`. - :ref:`for-loop-init-rewriter`. - :ref:`expression-inliner`. - :ref:`full-inliner`. - :ref:`function-grouper`. - :ref:`function-hoister`. - :ref:`function-specializer`. - :ref:`literal-rematerialiser`. - :ref:`load-resolver`. - :ref:`loop-invariant-code-motion`. - :ref:`redundant-assign-eliminator`. - :ref:`reasoning-based-simplifier`. - :ref:`rematerialiser`. - :ref:`SSA-reverser`. - :ref:`SSA-transform`. - :ref:`structural-simplifier`. - :ref:`unused-function-parameter-pruner`. - :ref:`unused-pruner`. - :ref:`var-decl-initializer`. Selecting Optimizations ----------------------- By default the optimizer applies its predefined sequence of optimization steps to the generated assembly. You can override this sequence and supply your own using the ``--yul-optimizations`` option: .. code-block:: bash solc --optimize --ir-optimized --yul-optimizations 'dhfoD[xarrscLMcCTU]uljmul' The sequence inside ``[...]`` will be applied multiple times in a loop until the Yul code remains unchanged or until the maximum number of rounds (currently 12) has been reached. Available abbreviations are listed in the :ref:`Yul optimizer docs `. Preprocessing ------------- The preprocessing components perform transformations to get the program into a certain normal form that is easier to work with. This normal form is kept during the rest of the optimization process. .. _disambiguator: Disambiguator ^^^^^^^^^^^^^ The disambiguator takes an AST and returns a fresh copy where all identifiers have unique names in the input AST. This is a prerequisite for all other optimizer stages. One of the benefits is that identifier lookup does not need to take scopes into account which simplifies the analysis needed for other steps. All subsequent stages have the property that all names stay unique. This means if a new identifier needs to be introduced, a new unique name is generated. .. _function-hoister: FunctionHoister ^^^^^^^^^^^^^^^ The function hoister moves all function definitions to the end of the topmost block. This is a semantically equivalent transformation as long as it is performed after the disambiguation stage. The reason is that moving a definition to a higher-level block cannot decrease its visibility and it is impossible to reference variables defined in a different function. The benefit of this stage is that function definitions can be looked up more easily and functions can be optimized in isolation without having to traverse the AST completely. .. _function-grouper: FunctionGrouper ^^^^^^^^^^^^^^^ The function grouper has to be applied after the disambiguator and the function hoister. Its effect is that all topmost elements that are not function definitions are moved into a single block which is the first statement of the root block. After this step, a program has the following normal form: .. code-block:: text { I F... } Where ``I`` is a (potentially empty) block that does not contain any function definitions (not even recursively) and ``F`` is a list of function definitions such that no function contains a function definition. The benefit of this stage is that we always know where the list of function begins. .. _for-loop-condition-into-body: ForLoopConditionIntoBody ^^^^^^^^^^^^^^^^^^^^^^^^ This transformation moves the loop-iteration condition of a for-loop into loop body. We need this transformation because :ref:`expression-splitter` will not apply to iteration condition expressions (the ``C`` in the following example). .. code-block:: text for { Init... } C { Post... } { Body... } is transformed to .. code-block:: text for { Init... } 1 { Post... } { if iszero(C) { break } Body... } This transformation can also be useful when paired with ``LoopInvariantCodeMotion``, since invariants in the loop-invariant conditions can then be taken outside the loop. .. _for-loop-init-rewriter: ForLoopInitRewriter ^^^^^^^^^^^^^^^^^^^ This transformation moves the initialization part of a for-loop to before the loop: .. code-block:: text for { Init... } C { Post... } { Body... } is transformed to .. code-block:: text Init... for {} C { Post... } { Body... } This eases the rest of the optimization process because we can ignore the complicated scoping rules of the for loop initialisation block. .. _var-decl-initializer: VarDeclInitializer ^^^^^^^^^^^^^^^^^^ This step rewrites variable declarations so that all of them are initialized. Declarations like ``let x, y`` are split into multiple declaration statements. Only supports initializing with the zero literal for now. Pseudo-SSA Transformation ------------------------- The purpose of this components is to get the program into a longer form, so that other components can more easily work with it. The final representation will be similar to a static-single-assignment (SSA) form, with the difference that it does not make use of explicit "phi" functions which combines the values from different branches of control flow because such a feature does not exist in the Yul language. Instead, when control flow merges, if a variable is re-assigned in one of the branches, a new SSA variable is declared to hold its current value, so that the following expressions still only need to reference SSA variables. An example transformation is the following: .. code-block:: yul { let a := calldataload(0) let b := calldataload(0x20) if gt(a, 0) { b := mul(b, 0x20) } a := add(a, 1) sstore(a, add(b, 0x20)) } When all the following transformation steps are applied, the program will look as follows: .. code-block:: yul { let _1 := 0 let a_9 := calldataload(_1) let a := a_9 let _2 := 0x20 let b_10 := calldataload(_2) let b := b_10 let _3 := 0 let _4 := gt(a_9, _3) if _4 { let _5 := 0x20 let b_11 := mul(b_10, _5) b := b_11 } let b_12 := b let _6 := 1 let a_13 := add(a_9, _6) let _7 := 0x20 let _8 := add(b_12, _7) sstore(a_13, _8) } Note that the only variable that is re-assigned in this snippet is ``b``. This re-assignment cannot be avoided because ``b`` has different values depending on the control flow. All other variables never change their value once they are defined. The advantage of this property is that variables can be freely moved around and references to them can be exchanged by their initial value (and vice-versa), as long as these values are still valid in the new context. Of course, the code here is far from being optimized. To the contrary, it is much longer. The hope is that this code will be easier to work with and furthermore, there are optimizer steps that undo these changes and make the code more compact again at the end. .. _expression-splitter: ExpressionSplitter ^^^^^^^^^^^^^^^^^^ The expression splitter turns expressions like ``add(mload(0x123), mul(mload(0x456), 0x20))`` into a sequence of declarations of unique variables that are assigned sub-expressions of that expression so that each function call has only variables as arguments. The above would be transformed into .. code-block:: yul { let _1 := 0x20 let _2 := 0x456 let _3 := mload(_2) let _4 := mul(_3, _1) let _5 := 0x123 let _6 := mload(_5) let z := add(_6, _4) } Note that this transformation does not change the order of opcodes or function calls. It is not applied to loop iteration-condition, because the loop control flow does not allow this "outlining" of the inner expressions in all cases. We can sidestep this limitation by applying :ref:`for-loop-condition-into-body` to move the iteration condition into loop body. The final program should be in a form such that (with the exception of loop conditions) function calls cannot appear nested inside expressions and all function call arguments have to be variables. The benefits of this form are that it is much easier to re-order the sequence of opcodes and it is also easier to perform function call inlining. Furthermore, it is simpler to replace individual parts of expressions or re-organize the "expression tree". The drawback is that such code is much harder to read for humans. .. _SSA-transform: SSATransform ^^^^^^^^^^^^ This stage tries to replace repeated assignments to existing variables by declarations of new variables as much as possible. The reassignments are still there, but all references to the reassigned variables are replaced by the newly declared variables. Example: .. code-block:: yul { let a := 1 mstore(a, 2) a := 3 } is transformed to .. code-block:: yul { let a_1 := 1 let a := a_1 mstore(a_1, 2) let a_3 := 3 a := a_3 } Exact semantics: For any variable ``a`` that is assigned to somewhere in the code (variables that are declared with value and never re-assigned are not modified) perform the following transforms: - replace ``let a := v`` by ``let a_i := v let a := a_i`` - replace ``a := v`` by ``let a_i := v a := a_i`` where ``i`` is a number such that ``a_i`` is yet unused. Furthermore, always record the current value of ``i`` used for ``a`` and replace each reference to ``a`` by ``a_i``. The current value mapping is cleared for a variable ``a`` at the end of each block in which it was assigned to and at the end of the for loop init block if it is assigned inside the for loop body or post block. If a variable's value is cleared according to the rule above and the variable is declared outside the block, a new SSA variable will be created at the location where control flow joins, this includes the beginning of loop post/body block and the location right after If/Switch/ForLoop/Block statement. After this stage, the Redundant Assign Eliminator is recommended to remove the unnecessary intermediate assignments. This stage provides best results if the Expression Splitter and the Common Subexpression Eliminator are run right before it, because then it does not generate excessive amounts of variables. On the other hand, the Common Subexpression Eliminator could be more efficient if run after the SSA transform. .. _redundant-assign-eliminator: RedundantAssignEliminator ^^^^^^^^^^^^^^^^^^^^^^^^^ The SSA transform always generates an assignment of the form ``a := a_i``, even though these might be unnecessary in many cases, like the following example: .. code-block:: yul { let a := 1 a := mload(a) a := sload(a) sstore(a, 1) } The SSA transform converts this snippet to the following: .. code-block:: yul { let a_1 := 1 let a := a_1 let a_2 := mload(a_1) a := a_2 let a_3 := sload(a_2) a := a_3 sstore(a_3, 1) } The Redundant Assign Eliminator removes all the three assignments to ``a``, because the value of ``a`` is not used and thus turn this snippet into strict SSA form: .. code-block:: yul { let a_1 := 1 let a_2 := mload(a_1) let a_3 := sload(a_2) sstore(a_3, 1) } Of course the intricate parts of determining whether an assignment is redundant or not are connected to joining control flow. The component works as follows in detail: The AST is traversed twice: in an information gathering step and in the actual removal step. During information gathering, we maintain a mapping from assignment statements to the three states "unused", "undecided" and "used" which signifies whether the assigned value will be used later by a reference to the variable. When an assignment is visited, it is added to the mapping in the "undecided" state (see remark about for loops below) and every other assignment to the same variable that is still in the "undecided" state is changed to "unused". When a variable is referenced, the state of any assignment to that variable still in the "undecided" state is changed to "used". At points where control flow splits, a copy of the mapping is handed over to each branch. At points where control flow joins, the two mappings coming from the two branches are combined in the following way: Statements that are only in one mapping or have the same state are used unchanged. Conflicting values are resolved in the following way: - "unused", "undecided" -> "undecided" - "unused", "used" -> "used" - "undecided, "used" -> "used" For for-loops, the condition, body and post-part are visited twice, taking the joining control-flow at the condition into account. In other words, we create three control flow paths: Zero runs of the loop, one run and two runs and then combine them at the end. Simulating a third run or even more is unnecessary, which can be seen as follows: A state of an assignment at the beginning of the iteration will deterministically result in a state of that assignment at the end of the iteration. Let this state mapping function be called ``f``. The combination of the three different states ``unused``, ``undecided`` and ``used`` as explained above is the ``max`` operation where ``unused = 0``, ``undecided = 1`` and ``used = 2``. The proper way would be to compute .. code-block:: none max(s, f(s), f(f(s)), f(f(f(s))), ...) as state after the loop. Since ``f`` just has a range of three different values, iterating it has to reach a cycle after at most three iterations, and thus ``f(f(f(s)))`` has to equal one of ``s``, ``f(s)``, or ``f(f(s))`` and thus .. code-block:: none max(s, f(s), f(f(s))) = max(s, f(s), f(f(s)), f(f(f(s))), ...). In summary, running the loop at most twice is enough because there are only three different states. For switch statements that have a "default"-case, there is no control-flow part that skips the switch. When a variable goes out of scope, all statements still in the "undecided" state are changed to "unused", unless the variable is the return parameter of a function - there, the state changes to "used". In the second traversal, all assignments that are in the "unused" state are removed. This step is usually run right after the SSA transform to complete the generation of the pseudo-SSA. Tools ----- Movability ^^^^^^^^^^ Movability is a property of an expression. It roughly means that the expression is side-effect free and its evaluation only depends on the values of variables and the call-constant state of the environment. Most expressions are movable. The following parts make an expression non-movable: - function calls (might be relaxed in the future if all statements in the function are movable) - opcodes that (can) have side-effects (like ``call`` or ``selfdestruct``) - opcodes that read or write memory, storage or external state information - opcodes that depend on the current PC, memory size or returndata size DataflowAnalyzer ^^^^^^^^^^^^^^^^ The Dataflow Analyzer is not an optimizer step itself but is used as a tool by other components. While traversing the AST, it tracks the current value of each variable, as long as that value is a movable expression. It records the variables that are part of the expression that is currently assigned to each other variable. Upon each assignment to a variable ``a``, the current stored value of ``a`` is updated and all stored values of all variables ``b`` are cleared whenever ``a`` is part of the currently stored expression for ``b``. At control-flow joins, knowledge about variables is cleared if they have or would be assigned in any of the control-flow paths. For instance, upon entering a for loop, all variables are cleared that will be assigned during the body or the post block. Expression-Scale Simplifications -------------------------------- These simplification passes change expressions and replace them by equivalent and hopefully simpler expressions. .. _common-subexpression-eliminator: CommonSubexpressionEliminator ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ This step uses the Dataflow Analyzer and replaces subexpressions that syntactically match the current value of a variable by a reference to that variable. This is an equivalence transform because such subexpressions have to be movable. All subexpressions that are identifiers themselves are replaced by their current value if the value is an identifier. The combination of the two rules above allow to compute a local value numbering, which means that if two variables have the same value, one of them will always be unused. The Unused Pruner or the Redundant Assign Eliminator will then be able to fully eliminate such variables. This step is especially efficient if the expression splitter is run before. If the code is in pseudo-SSA form, the values of variables are available for a longer time and thus we have a higher chance of expressions to be replaceable. The expression simplifier will be able to perform better replacements if the common subexpression eliminator was run right before it. .. _expression-simplifier: Expression Simplifier ^^^^^^^^^^^^^^^^^^^^^ The Expression Simplifier uses the Dataflow Analyzer and makes use of a list of equivalence transforms on expressions like ``X + 0 -> X`` to simplify the code. It tries to match patterns like ``X + 0`` on each subexpression. During the matching procedure, it resolves variables to their currently assigned expressions to be able to match more deeply nested patterns even when the code is in pseudo-SSA form. Some of the patterns like ``X - X -> 0`` can only be applied as long as the expression ``X`` is movable, because otherwise it would remove its potential side-effects. Since variable references are always movable, even if their current value might not be, the Expression Simplifier is again more powerful in split or pseudo-SSA form. .. _literal-rematerialiser: LiteralRematerialiser ^^^^^^^^^^^^^^^^^^^^^ To be documented. .. _load-resolver: LoadResolver ^^^^^^^^^^^^ Optimisation stage that replaces expressions of type ``sload(x)`` and ``mload(x)`` by the value currently stored in storage resp. memory, if known. Works best if the code is in SSA form. Prerequisite: Disambiguator, ForLoopInitRewriter. .. _reasoning-based-simplifier: ReasoningBasedSimplifier ^^^^^^^^^^^^^^^^^^^^^^^^ This optimizer uses SMT solvers to check whether ``if`` conditions are constant. - If ``constraints AND condition`` is UNSAT, the condition is never true and the whole body can be removed. - If ``constraints AND NOT condition`` is UNSAT, the condition is always true and can be replaced by ``1``. The simplifications above can only be applied if the condition is movable. It is only effective on the EVM dialect, but safe to use on other dialects. Prerequisite: Disambiguator, SSATransform. Statement-Scale Simplifications ------------------------------- .. _circular-reference-pruner: CircularReferencesPruner ^^^^^^^^^^^^^^^^^^^^^^^^ This stage removes functions that call each other but are neither externally referenced nor referenced from the outermost context. .. _conditional-simplifier: ConditionalSimplifier ^^^^^^^^^^^^^^^^^^^^^ The Conditional Simplifier inserts assignments to condition variables if the value can be determined from the control-flow. Destroys SSA form. Currently, this tool is very limited, mostly because we do not yet have support for boolean types. Since conditions only check for expressions being nonzero, we cannot assign a specific value. Current features: - switch cases: insert " := " - after if statement with terminating control-flow, insert " := 0" Future features: - allow replacements by "1" - take termination of user-defined functions into account Works best with SSA form and if dead code removal has run before. Prerequisite: Disambiguator. .. _conditional-unsimplifier: ConditionalUnsimplifier ^^^^^^^^^^^^^^^^^^^^^^^ Reverse of Conditional Simplifier. .. _control-flow-simplifier: ControlFlowSimplifier ^^^^^^^^^^^^^^^^^^^^^ Simplifies several control-flow structures: - replace if with empty body with pop(condition) - remove empty default switch case - remove empty switch case if no default case exists - replace switch with no cases with pop(expression) - turn switch with single case into if - replace switch with only default case with pop(expression) and body - replace switch with const expr with matching case body - replace ``for`` with terminating control flow and without other break/continue by ``if`` - remove ``leave`` at the end of a function. None of these operations depend on the data flow. The StructuralSimplifier performs similar tasks that do depend on data flow. The ControlFlowSimplifier does record the presence or absence of ``break`` and ``continue`` statements during its traversal. Prerequisite: Disambiguator, FunctionHoister, ForLoopInitRewriter. Important: Introduces EVM opcodes and thus can only be used on EVM code for now. .. _dead-code-eliminator: DeadCodeEliminator ^^^^^^^^^^^^^^^^^^ This optimization stage removes unreachable code. Unreachable code is any code within a block which is preceded by a leave, return, invalid, break, continue, selfdestruct or revert. Function definitions are retained as they might be called by earlier code and thus are considered reachable. Because variables declared in a for loop's init block have their scope extended to the loop body, we require ForLoopInitRewriter to run before this step. Prerequisite: ForLoopInitRewriter, Function Hoister, Function Grouper .. _equal-store-eliminator: EqualStoreEliminator ^^^^^^^^^^^^^^^^^^^^ This steps removes ``mstore(k, v)`` and ``sstore(k, v)`` calls if there was a previous call to ``mstore(k, v)`` / ``sstore(k, v)``, no other store in between and the values of ``k`` and ``v`` did not change. This simple step is effective if run after the SSA transform and the Common Subexpression Eliminator, because SSA will make sure that the variables will not change and the Common Subexpression Eliminator re-uses exactly the same variable if the value is known to be the same. Prerequisites: Disambiguator, ForLoopInitRewriter .. _unused-pruner: UnusedPruner ^^^^^^^^^^^^ This step removes the definitions of all functions that are never referenced. It also removes the declaration of variables that are never referenced. If the declaration assigns a value that is not movable, the expression is retained, but its value is discarded. All movable expression statements (expressions that are not assigned) are removed. .. _structural-simplifier: StructuralSimplifier ^^^^^^^^^^^^^^^^^^^^ This is a general step that performs various kinds of simplifications on a structural level: - replace if statement with empty body by ``pop(condition)`` - replace if statement with true condition by its body - remove if statement with false condition - turn switch with single case into if - replace switch with only default case by ``pop(expression)`` and body - replace switch with literal expression by matching case body - replace for loop with false condition by its initialization part This component uses the Dataflow Analyzer. .. _block-flattener: BlockFlattener ^^^^^^^^^^^^^^ This stage eliminates nested blocks by inserting the statement in the inner block at the appropriate place in the outer block. It depends on the FunctionGrouper and does not flatten the outermost block to keep the form produced by the FunctionGrouper. .. code-block:: yul { { let x := 2 { let y := 3 mstore(x, y) } } } is transformed to .. code-block:: yul { { let x := 2 let y := 3 mstore(x, y) } } As long as the code is disambiguated, this does not cause a problem because the scopes of variables can only grow. .. _loop-invariant-code-motion: LoopInvariantCodeMotion ^^^^^^^^^^^^^^^^^^^^^^^ This optimization moves movable SSA variable declarations outside the loop. Only statements at the top level in a loop's body or post block are considered, i.e variable declarations inside conditional branches will not be moved out of the loop. Requirements: - The Disambiguator, ForLoopInitRewriter and FunctionHoister must be run upfront. - Expression splitter and SSA transform should be run upfront to obtain better result. Function-Level Optimizations ---------------------------- .. _function-specializer: FunctionSpecializer ^^^^^^^^^^^^^^^^^^^ This step specializes the function with its literal arguments. If a function, say, ``function f(a, b) { sstore (a, b) }``, is called with literal arguments, for example, ``f(x, 5)``, where ``x`` is an identifier, it could be specialized by creating a new function ``f_1`` that takes only one argument, i.e., .. code-block:: yul function f_1(a_1) { let b_1 := 5 sstore(a_1, b_1) } Other optimization steps will be able to make more simplifications to the function. The optimization step is mainly useful for functions that would not be inlined. Prerequisites: Disambiguator, FunctionHoister LiteralRematerialiser is recommended as a prerequisite, even though it's not required for correctness. .. _unused-function-parameter-pruner: UnusedFunctionParameterPruner ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ This step removes unused parameters in a function. If a parameter is unused, like ``c`` and ``y`` in, ``function f(a,b,c) -> x, y { x := div(a,b) }``, we remove the parameter and create a new "linking" function as follows: .. code-block:: yul function f(a,b) -> x { x := div(a,b) } function f2(a,b,c) -> x, y { x := f(a,b) } and replace all references to ``f`` by ``f2``. The inliner should be run afterwards to make sure that all references to ``f2`` are replaced by ``f``. Prerequisites: Disambiguator, FunctionHoister, LiteralRematerialiser. The step LiteralRematerialiser is not required for correctness. It helps deal with cases such as: ``function f(x) -> y { revert(y, y} }`` where the literal ``y`` will be replaced by its value ``0``, allowing us to rewrite the function. .. _equivalent-function-combiner: EquivalentFunctionCombiner ^^^^^^^^^^^^^^^^^^^^^^^^^^ If two functions are syntactically equivalent, while allowing variable renaming but not any re-ordering, then any reference to one of the functions is replaced by the other. The actual removal of the function is performed by the Unused Pruner. Function Inlining ----------------- .. _expression-inliner: ExpressionInliner ^^^^^^^^^^^^^^^^^ This component of the optimizer performs restricted function inlining by inlining functions that can be inlined inside functional expressions, i.e. functions that: - return a single value. - have a body like ``r := ``. - neither reference themselves nor ``r`` in the right hand side. Furthermore, for all parameters, all of the following need to be true: - The argument is movable. - The parameter is either referenced less than twice in the function body, or the argument is rather cheap ("cost" of at most 1, like a constant up to 0xff). Example: The function to be inlined has the form of ``function f(...) -> r { r := E }`` where ``E`` is an expression that does not reference ``r`` and all arguments in the function call are movable expressions. The result of this inlining is always a single expression. This component can only be used on sources with unique names. .. _full-inliner: FullInliner ^^^^^^^^^^^ The Full Inliner replaces certain calls of certain functions by the function's body. This is not very helpful in most cases, because it just increases the code size but does not have a benefit. Furthermore, code is usually very expensive and we would often rather have shorter code than more efficient code. In same cases, though, inlining a function can have positive effects on subsequent optimizer steps. This is the case if one of the function arguments is a constant, for example. During inlining, a heuristic is used to tell if the function call should be inlined or not. The current heuristic does not inline into "large" functions unless the called function is tiny. Functions that are only used once are inlined, as well as medium-sized functions, while function calls with constant arguments allow slightly larger functions. In the future, we may include a backtracking component that, instead of inlining a function right away, only specializes it, which means that a copy of the function is generated where a certain parameter is always replaced by a constant. After that, we can run the optimizer on this specialized function. If it results in heavy gains, the specialized function is kept, otherwise the original function is used instead. Cleanup ------- The cleanup is performed at the end of the optimizer run. It tries to combine split expressions into deeply nested ones again and also improves the "compilability" for stack machines by eliminating variables as much as possible. .. _expression-joiner: ExpressionJoiner ^^^^^^^^^^^^^^^^ This is the opposite operation of the expression splitter. It turns a sequence of variable declarations that have exactly one reference into a complex expression. This stage fully preserves the order of function calls and opcode executions. It does not make use of any information concerning the commutativity of the opcodes; if moving the value of a variable to its place of use would change the order of any function call or opcode execution, the transformation is not performed. Note that the component will not move the assigned value of a variable assignment or a variable that is referenced more than once. The snippet ``let x := add(0, 2) let y := mul(x, mload(2))`` is not transformed, because it would cause the order of the call to the opcodes ``add`` and ``mload`` to be swapped - even though this would not make a difference because ``add`` is movable. When reordering opcodes like that, variable references and literals are ignored. Because of that, the snippet ``let x := add(0, 2) let y := mul(x, 3)`` is transformed to ``let y := mul(add(0, 2), 3)``, even though the ``add`` opcode would be executed after the evaluation of the literal ``3``. .. _SSA-reverser: SSAReverser ^^^^^^^^^^^ This is a tiny step that helps in reversing the effects of the SSA transform if it is combined with the Common Subexpression Eliminator and the Unused Pruner. The SSA form we generate is detrimental to code generation on the EVM and WebAssembly alike because it generates many local variables. It would be better to just re-use existing variables with assignments instead of fresh variable declarations. The SSA transform rewrites .. code-block:: yul let a := calldataload(0) mstore(a, 1) to .. code-block:: yul let a_1 := calldataload(0) let a := a_1 mstore(a_1, 1) let a_2 := calldataload(0x20) a := a_2 The problem is that instead of ``a``, the variable ``a_1`` is used whenever ``a`` was referenced. The SSA transform changes statements of this form by just swapping out the declaration and the assignment. The above snippet is turned into .. code-block:: yul let a := calldataload(0) let a_1 := a mstore(a_1, 1) a := calldataload(0x20) let a_2 := a This is a very simple equivalence transform, but when we now run the Common Subexpression Eliminator, it will replace all occurrences of ``a_1`` by ``a`` (until ``a`` is re-assigned). The Unused Pruner will then eliminate the variable ``a_1`` altogether and thus fully reverse the SSA transform. .. _stack-compressor: StackCompressor ^^^^^^^^^^^^^^^ One problem that makes code generation for the Ethereum Virtual Machine hard is the fact that there is a hard limit of 16 slots for reaching down the expression stack. This more or less translates to a limit of 16 local variables. The stack compressor takes Yul code and compiles it to EVM bytecode. Whenever the stack difference is too large, it records the function this happened in. For each function that caused such a problem, the Rematerialiser is called with a special request to aggressively eliminate specific variables sorted by the cost of their values. On failure, this procedure is repeated multiple times. .. _rematerialiser: Rematerialiser ^^^^^^^^^^^^^^ The rematerialisation stage tries to replace variable references by the expression that was last assigned to the variable. This is of course only beneficial if this expression is comparatively cheap to evaluate. Furthermore, it is only semantically equivalent if the value of the expression did not change between the point of assignment and the point of use. The main benefit of this stage is that it can save stack slots if it leads to a variable being eliminated completely (see below), but it can also save a DUP opcode on the EVM if the expression is very cheap. The Rematerialiser uses the Dataflow Analyzer to track the current values of variables, which are always movable. If the value is very cheap or the variable was explicitly requested to be eliminated, the variable reference is replaced by its current value. .. _for-loop-condition-out-of-body: ForLoopConditionOutOfBody ^^^^^^^^^^^^^^^^^^^^^^^^^ Reverses the transformation of ForLoopConditionIntoBody. For any movable ``c``, it turns .. code-block:: none for { ... } 1 { ... } { if iszero(c) { break } ... } into .. code-block:: none for { ... } c { ... } { ... } and it turns .. code-block:: none for { ... } 1 { ... } { if c { break } ... } into .. code-block:: none for { ... } iszero(c) { ... } { ... } The LiteralRematerialiser should be run before this step. WebAssembly specific -------------------- MainFunction ^^^^^^^^^^^^ Changes the topmost block to be a function with a specific name ("main") which has no inputs nor outputs. Depends on the Function Grouper.