fix(docs): fix missing backticks, remove latexpdfja, fix the missing help message of latexpdf, and remove unnecessary whitespace (#14101)

* Fix missing backticks

* Remove whitespace in the header of the optimizer step

* Remove whitespace in directives

* Remove `make latexpdfja`

* Add the help message of latexpdf in make.bat

* Fix missing backticks

* Update docs/internals/optimizer.rst

---------

Co-authored-by: Nuno Santos <nunofilipesantos@gmail.com>

docs/080-breaking-changes.rst

@@ -173,4 +173,4 @@ How to update your code
 - Change ``msg.sender.transfer(x)`` to ``payable(msg.sender).transfer(x)`` or use a stored variable of ``address payable`` type.
 - Change ``x**y**z`` to ``(x**y)**z``.
 - Use inline assembly as a replacement for ``log0``, ..., ``log4``.
-- Negate unsigned integers by subtracting them from the maximum value of the type and adding 1 (e.g. ``type(uint256).max - x + 1``, while ensuring that `x` is not zero)
+- Negate unsigned integers by subtracting them from the maximum value of the type and adding 1 (e.g. ``type(uint256).max - x + 1``, while ensuring that ``x`` is not zero)

docs/Makefile

@@ -34,7 +34,6 @@ help:
 	@echo "  epub       to make an epub"
 	@echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
 	@echo "  latexpdf   to make LaTeX files and run them through pdflatex"
-	@echo "  latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
 	@echo "  text       to make text files"
 	@echo "  man        to make manual pages"
 	@echo "  texinfo    to make Texinfo files"
@@ -116,12 +115,6 @@ latexpdf:
 	$(MAKE) -C $(BUILDDIR)/latex all-pdf
 	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
 
-latexpdfja:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo "Running LaTeX files through platex and dvipdfmx..."
-	$(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
-	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
 text:
 	$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
 	@echo

docs/contracts/inheritance.rst

@@ -436,11 +436,11 @@ You can use internal parameters in a constructor (for example storage pointers).
 the contract has to be marked :ref:`abstract <abstract-contract>`, because these parameters
 cannot be assigned valid values from outside but only through the constructors of derived contracts.
 
-.. warning ::
+.. warning::
     Prior to version 0.4.22, constructors were defined as functions with the same name as the contract.
     This syntax was deprecated and is not allowed anymore in version 0.5.0.
 
-.. warning ::
+.. warning::
     Prior to version 0.7.0, you had to specify the visibility of constructors as either
     ``internal`` or ``public``.
 

docs/contributing.rst

@@ -146,7 +146,7 @@ SMT tests by exporting ``SMT_FLAGS=--no-smt`` before running ``./scripts/tests.s
 running ``./scripts/soltest.sh --no-smt``.
 These tests are ``libsolidity/smtCheckerTests`` and ``libsolidity/smtCheckerTestsJSON``.
 
-.. note ::
+.. note::
 
     To get a list of all unit tests run by Soltest, run ``./build/test/soltest --list_content=HRF``.
 
@@ -167,7 +167,7 @@ See especially:
 - `run_test (-t) <https://www.boost.org/doc/libs/release/libs/test/doc/html/boost_test/utf_reference/rt_param_reference/run_test.html>`_ to run specific tests cases, and
 - `report-level (-r) <https://www.boost.org/doc/libs/release/libs/test/doc/html/boost_test/utf_reference/rt_param_reference/report_level.html>`_ give a more detailed report.
 
-.. note ::
+.. note::
 
     Those working in a Windows environment wanting to run the above basic sets
     without libz3. Using Git Bash, you use: ``./build/test/Release/soltest.exe -- --no-smt``.

docs/control-structures.rst

@@ -651,7 +651,7 @@ in the following situations:
 
 For the following cases, the error data from the external call
 (if provided) is forwarded. This means that it can either cause
-an `Error` or a `Panic` (or whatever else was given):
+an ``Error`` or a ``Panic`` (or whatever else was given):
 
 #. If a ``.transfer()`` fails.
 #. If you call a function via a message call but it does not finish

docs/installing-solidity.rst

@@ -527,7 +527,7 @@ If you are interested what CMake options are available run ``cmake .. -LH``.
 SMT Solvers
 -----------
 Solidity can be built against SMT solvers and will do so by default if
-they are found in the system. Each solver can be disabled by a `cmake` option.
+they are found in the system. Each solver can be disabled by a ``cmake`` option.
 
 *Note: In some cases, this can also be a potential workaround for build failures.*
 

docs/internals/layout_in_storage.rst

@@ -208,7 +208,7 @@ of types), arrays have its ``base`` type, and structs list their ``members`` in
 the same format as the top-level ``storage`` (see :ref:`above
 <storage-layout-top-level>`).
 
-.. note ::
+.. note::
   The JSON output format of a contract's storage layout is still considered experimental
   and is subject to change in non-breaking releases of Solidity.
 

docs/internals/optimizer.rst

@@ -826,10 +826,10 @@ if the common subexpression eliminator was run right before it.
 
 .. _expression-simplifier:
 
-Expression Simplifier
+ExpressionSimplifier
-^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^^
 
-The Expression Simplifier uses the Dataflow Analyzer and makes use
+The ExpressionSimplifier uses the Dataflow Analyzer and makes use
 of a list of equivalence transforms on expressions like ``X + 0 -> X``
 to simplify the code.
 

docs/internals/source_mappings.rst

@@ -26,7 +26,7 @@ that are not part of the original input but are referenced from the source
 mappings. These source files together with their identifiers can be
 obtained via ``output['contracts'][sourceName][contractName]['evm']['bytecode']['generatedSources']``.
 
-.. note ::
+.. note::
     In the case of instructions that are not associated with any particular source file,
     the source mapping assigns an integer identifier of ``-1``. This may happen for
     bytecode sections stemming from compiler-generated inline assembly statements.

docs/ir-breaking-changes.rst

@@ -247,7 +247,7 @@ hiding new and different behavior in existing code.
           }
       }
 
-  The function `f()` behaves as follows:
+  The function ``f()`` behaves as follows:
 
   - Old code generator: runs out of gas while zeroing the array contents after the large memory allocation
   - New code generator: reverts due to free memory pointer overflow (does not run out of gas)

docs/make.bat

@@ -28,6 +28,7 @@ if "%1" == "help" (
 	echo.  devhelp    to make HTML files and a Devhelp project
 	echo.  epub       to make an epub
 	echo.  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter
+	echo.  latexpdf   to make LaTeX files and run them through pdflatex
 	echo.  text       to make text files
 	echo.  man        to make manual pages
 	echo.  texinfo    to make Texinfo files
@@ -155,16 +156,6 @@ if "%1" == "latexpdf" (
 	goto end
 )
 
-if "%1" == "latexpdfja" (
-	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
-	cd %BUILDDIR%/latex
-	make all-pdf-ja
-	cd %BUILDDIR%/..
-	echo.
-	echo.Build finished; the PDF files are in %BUILDDIR%/latex.
-	goto end
-)
-
 if "%1" == "text" (
 	%SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text
 	if errorlevel 1 exit /b 1

docs/yul.rst

@@ -947,7 +947,7 @@ the ``dup`` and ``swap`` instructions as well as ``jump`` instructions, labels a
   The remaining bytes will retain their values as of before the call.
 
 .. note::
-  The `difficulty()` instruction is disallowed in EVM version >= Paris.
+  The ``difficulty()`` instruction is disallowed in EVM version >= Paris.
   With the Paris network upgrade the semantics of the instruction that was previously called
   ``difficulty`` have been changed and the instruction was renamed to ``prevrandao``.
   It can now return arbitrary values in the full 256-bit range, whereas the highest recorded