The following types are also called value types because variables of these
types will always be passed by value, i.e. they are always copied when they
are used as function arguments or in assignments.
..index:: ! bool, ! true, ! false
Booleans
--------
``bool``: The possible values are constants ``true`` and ``false``.
Operators:
*``!`` (logical negation)
*``&&`` (logical conjunction, "and")
*``||`` (logical disjunction, "or")
*``==`` (equality)
*``!=`` (inequality)
The operators ``||`` and ``&&`` apply the common short-circuiting rules. This means that in the expression ``f(x) || g(y)``, if ``f(x)`` evaluates to ``true``, ``g(y)`` will not be evaluated even if it may have side-effects.
``int`` / ``uint``: Signed and unsigned integers of various sizes. Keywords ``uint8`` to ``uint256`` in steps of ``8`` (unsigned of 8 up to 256 bits) and ``int8`` to ``int256``. ``uint`` and ``int`` are aliases for ``uint256`` and ``int256``, respectively.
The result of a shift operation has the type of the left operand, truncating the result to match the type.
- For positive and negative ``x`` values, ``x << y`` is equivalent to ``x * 2**y``.
- For positive ``x`` values, ``x >> y`` is equivalent to ``x / 2**y``.
- For negative ``x`` values, ``x >> y`` is equivalent to ``(x + 1) / 2**y - 1`` (which is the same as dividing ``x`` by ``2**y`` while rounding down towards negative infinity).
- In all cases, shifting by a negative ``y`` throws a runtime exception.
Exponentiation is only available for unsigned types. Please take care that the types
you are using are large enough to hold the result and prepare for potential wrapping behaviour.
..note::
Note that ``0**0`` is defined by the EVM as ``1``.
..index:: ! ufixed, ! fixed, ! fixed point number
Fixed Point Numbers
-------------------
..warning::
Fixed point numbers are not fully supported by Solidity yet. They can be declared, but
cannot be assigned to or from.
``fixed`` / ``ufixed``: Signed and unsigned fixed point number of various sizes. Keywords ``ufixedMxN`` and ``fixedMxN``, where ``M`` represents the number of bits taken by
the type and ``N`` represents how many decimal points are available. ``M`` must be divisible by 8 and goes from 8 to 256 bits. ``N`` must be between 0 and 80, inclusive.
``ufixed`` and ``fixed`` are aliases for ``ufixed128x18`` and ``fixed128x18``, respectively.
You can use ``address(uint160(bytes20(b)))``, which results in ``0x111122223333444455556666777788889999aAaa``,
or you can use ``address(uint160(uint256(b)))``, which results in ``0x777788889999AaAAbBbbCcccddDdeeeEfFFfCcCc``.
..note::
The distinction between ``address`` and ``address payable`` was introduced with version 0.5.0.
Also starting from that version, contracts do not derive from the address type, but can still be explicitly converted to
``address`` or to ``address payable``, if they have a payable fallback function.
.._members-of-addresses:
Members of Addresses
^^^^^^^^^^^^^^^^^^^^
For a quick reference of all members of address, see :ref:`address_related`.
*``balance`` and ``transfer``
It is possible to query the balance of an address using the property ``balance``
and to send Ether (in units of wei) to a payable address using the ``transfer`` function:
::
address payable x = address(0x123);
address myAddress = address(this);
if (x.balance < 10 && myAddress.balance >= 10) x.transfer(10);
The ``transfer`` function fails if the balance of the current contract is not large enough
or if the Ether transfer is rejected by the receiving account. The ``transfer`` function
reverts on failure.
..note::
If ``x`` is a contract address, its code (more specifically: its :ref:`fallback-function`, if present) will be executed together with the ``transfer`` call (this is a feature of the EVM and cannot be prevented). If that execution runs out of gas or fails in any way, the Ether transfer will be reverted and the current contract will stop with an exception.
*``send``
Send is the low-level counterpart of ``transfer``. If the execution fails, the current contract will not stop with an exception, but ``send`` will return ``false``.
..warning::
There are some dangers in using ``send``: The transfer fails if the call stack depth is at 1024
(this can always be forced by the caller) and it also fails if the recipient runs out of gas. So in order
to make safe Ether transfers, always check the return value of ``send``, use ``transfer`` or even better:
use a pattern where the recipient withdraws the money.
*``call``, ``delegatecall`` and ``staticcall``
In order to interface with contracts that do not adhere to the ABI,
or to get more direct control over the encoding,
the functions ``call``, ``delegatecall`` and ``staticcall`` are provided.
They all take a single ``bytes memory`` parameter and
return the success condition (as a ``bool``) and the returned data
(``bytes memory``).
The functions ``abi.encode``, ``abi.encodePacked``, ``abi.encodeWithSelector``
and ``abi.encodeWithSignature`` can be used to encode structured data.
In a similar way, the function ``delegatecall`` can be used: the difference is that only the code of the given address is used, all other aspects (storage, balance, ...) are taken from the current contract. The purpose of ``delegatecall`` is to use library code which is stored in another contract. The user has to ensure that the layout of storage in both contracts is suitable for delegatecall to be used.
..note::
Prior to homestead, only a limited variant called ``callcode`` was available that did not provide access to the original ``msg.sender`` and ``msg.value`` values. This function was removed in version 0.5.0.
Since byzantium ``staticcall`` can be used as well. This is basically the same as ``call``, but will revert if the called function modifies the state in any way.
All three functions ``call``, ``delegatecall`` and ``staticcall`` are very low-level functions and should only be used as a *last resort* as they break the type-safety of Solidity.
The ``.gas()`` option is available on all three methods, while the ``.value()`` option is not supported for ``delegatecall``.
..note::
All contracts can be converted to ``address`` type, so it is possible to query the balance of the
current contract using ``address(this).balance``.
..index:: ! contract type, ! type; contract
.._contract_types:
Contract Types
--------------
Every :ref:`contract<contracts>` defines its own type.
You can implicitly convert contracts to contracts they inherit from.
Division on integer literals used to truncate in Solidity prior to version 0.4.0, but it now converts into a rational number, i.e. ``5 / 2`` is not equal to ``2``, but to ``2.5``.
String literals are written with either double or single-quotes (``"foo"`` or ``'bar'``), and they can also be split into multiple consecutive parts (``"foo" "bar"`` is equivalent to ``"foobar"``) which can be helpful when dealing with long strings. They do not imply trailing zeroes as in C; ``"foo"`` represents three bytes, not four. As with integer literals, their type can vary, but they are implicitly convertible to ``bytes1``, ..., ``bytes32``, if they fit, to ``bytes`` and to ``string``.
Hexadecimal literals are prefixed with the keyword ``hex`` and are enclosed in double or single-quotes (``hex"001122FF"``), and they can also be split into multiple consecutive parts (``hex"00112233" hex"44556677"`` is equivalent to ``hex"0011223344556677"``). Their content must be a hexadecimal string and their value will be the binary representation of those values.
Public (or external) functions have the following members:
*``.selector`` returns the :ref:`ABI function selector <abi_function_selector>`
*``.gas(uint)`` returns a callable function object which, when called, will send the specified amount of gas to the target function. See :ref:`External Function Calls <external-function-calls>` for more information.
*``.value(uint)`` returns a callable function object which, when called, will send the specified amount of wei to the target function. See :ref:`External Function Calls <external-function-calls>` for more information.
