Commit Graph

31 Commits

Author SHA1 Message Date
gary rong
45cb1a580a
eth, les: add new config field SyncFromCheckpoint (#22123)
This PR introduces a new config field SyncFromCheckpoint for light client.

In some special scenarios, it's required to start synchronization from some
arbitrary checkpoint or even from the scratch. So this PR offers this
flexibility to users so that the synchronization start point can be configured.

There are two relevant configs: SyncFromCheckpoint and Checkpoint.

- If the SyncFromCheckpoint is true, the light client will try to sync from the
  specified checkpoint.

- If the Checkpoint is not configured, then the light client will sync from the
  scratch(from the latest header if the database is not empty)

Additional notes: these two configs are not visible in the CLI flags but only
accessable in the config file.

Example Usage:

[Eth]
SyncFromCheckpoint = true

[Eth.Checkpoint]
SectionIndex = 100
SectionHead = "0xabc"
CHTRoot = "0xabc"
BloomRoot = "0xabc"

PS. Historical checkpoint can be retrieved from the synced full node or light
client via les_getCheckpoint API.
2021-01-19 10:52:45 +01:00
Péter Szilágyi
017831dd5b
core, eth: split eth package, implement snap protocol (#21482)
This commit splits the eth package, separating the handling of eth and snap protocols. It also includes the capability to run snap sync (https://github.com/ethereum/devp2p/blob/master/caps/snap.md) , but does not enable it by default. 

Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Martin Holst Swende <martin@swende.se>
2020-12-14 10:27:15 +01:00
gary rong
23524f8900
all: disable recording preimage of trie keys (#21402)
* cmd, core, eth, light, trie: disable recording preimage by default

* core, eth: fix unit tests

* core: fix import

* all: change to nopreimage

* cmd, core, eth, trie: use cache.preimages flag

* cmd: enable preimages for archive node

* cmd/utils, trie: simplify preimage tracking a bit

* core: fix linter

Co-authored-by: Péter Szilágyi <peterke@gmail.com>
2020-11-18 11:51:33 +02:00
gary rong
93da0cf8a1
cmd, core, eth, light, trie: dump clean cache periodically (#20391)
* cmd, core, eth, light, trie: dump clean cache periodically

* eth: update config

* trie: minor fix

* core, trie: address comments

* eth: remove useless

* trie: print clean cache dump start too

Co-authored-by: Péter Szilágyi <peterke@gmail.com>
2020-07-28 16:30:31 +03:00
gary rong
6eef141aef
les: historical data garbage collection (#19570)
This change introduces garbage collection for the light client. Historical
chain data is deleted periodically. If you want to disable the GC, use
the --light.nopruning flag.
2020-07-13 11:02:54 +02:00
Martin Holst Swende
12867d152c
rpc, internal/ethapi: default rpc gascap at 25M + better error message (#21229)
* rpc, internal/ethapi: default rpc gascap at 50M + better error message

* eth,internal: make globalgascap uint64

* core/tests: fix compilation failure

* eth/config: gascap at 25M + minor review concerns
2020-07-01 19:54:21 +02:00
gary rong
56a319b9da
cmd, eth, internal, les: add txfee cap (#21212)
* cmd, eth, internal, les: add gasprice cap

* cmd/utils, eth: add default value for gasprice cap

* all: use txfee cap

* cmd, eth: add fix

* cmd, internal: address comments
2020-06-17 10:46:31 +03:00
Martin Holst Swende
4535230059
cmd, core, eth: background transaction indexing (#20302)
* cmd, core, eth: init tx lookup in background

* core/rawdb: tiny log fixes to make it clearer what's happening

* core, eth: fix rebase errors

* core/rawdb: make reindexing less generic, but more optimal

* rlp: implement rlp list iterator

* core/rawdb: new implementation of tx indexing/unindex using generic tx iterator and hashing rlp-data

* core/rawdb, cmd/utils: fix review concerns

* cmd/utils: fix merge issue

* core/rawdb: add some log formatting polishes

Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
2020-05-11 18:58:43 +03:00
rene
648b0cb714
cmd, core: remove override muir glacier and override istanbul (#20942) 2020-04-20 12:46:38 +03:00
Felix Lange
38d1b0cba2
cmd/geth: enable DNS discovery by default (#20660)
* node: expose config in service context

* eth: integrate p2p/dnsdisc

* cmd/geth: add some DNS flags

* eth: remove DNS URLs

* cmd/utils: configure DNS names for testnets

* params: update DNS URLs

* cmd/geth: configure mainnet DNS

* cmd/utils: rename DNS flag and fix flag processing

* cmd/utils: remove debug print

* node: fix test
2020-02-13 15:38:30 +02:00
gary rong
252150918c cmd, eth: fix dump config issue (#19825)
* eth: fix error when dump config with nil checkpoint

* cmd/utils: ignore default datadir if it's already set.
2019-07-11 14:37:08 +03:00
Péter Szilágyi
c705aac826
cmd, eth, les: make les flags conform to dotted style 2019-07-10 09:12:07 +03:00
Péter Szilágyi
213690cdfd
cmd, eth, les: fix up ultra light config integration 2019-07-09 20:34:42 +03:00
Péter Szilágyi
22411919da
cmd, eth, les, param: drop --override.constantinople 2019-07-02 14:14:59 +03:00
gary rong
f7cdea2bdc all: on-chain oracle checkpoint syncing (#19543)
* all: implement simple checkpoint syncing

cmd, les, node: remove callback mechanism

cmd, node: remove callback definition

les: simplify the registrar

les: expose checkpoint rpc services in the light client

les, light: don't store untrusted receipt

cmd, contracts, les: discard stale checkpoint

cmd, contracts/registrar: loose restriction of registeration

cmd, contracts: add replay-protection

all: off-chain multi-signature contract

params: deploy checkpoint contract for rinkeby

cmd/registrar: add raw signing mode for registrar

cmd/registrar, contracts/registrar, les: fixed messages

* cmd/registrar, contracts/registrar: fix lints

* accounts/abi/bind, les: address comments

* cmd, contracts, les, light, params: minor checkpoint sync cleanups

* cmd, eth, les, light: move checkpoint config to config file

* cmd, eth, les, params: address comments

* eth, les, params: address comments

* cmd: polish up the checkpoint admin CLI

* cmd, contracts, params: deploy new version contract

* cmd/checkpoint-admin: add another flag for clef mode signing

* cmd, contracts, les: rename and regen checkpoint oracle with abigen
2019-06-28 10:34:02 +03:00
gary rong
6269e5574c miner: polish miner configuration (#19480)
* cmd, eth, miner: disable advance sealing if user require

* cmd, console, miner, les, eth: wrap the miner config

* eth: remove todo

* cmd, miner: revert noadvance flag

The reason for this is: if the transaction execution is even longer
than block time, then this kind of transactions is DoS attack.
2019-04-23 10:08:51 +03:00
Felföldi Zsolt
c2003ed63b les, les/flowcontrol: improved request serving and flow control (#18230)
This change

- implements concurrent LES request serving even for a single peer.
- replaces the request cost estimation method with a cost table based on
  benchmarks which gives much more consistent results. Until now the
  allowed number of light peers was just a guess which probably contributed
  a lot to the fluctuating quality of available service. Everything related
  to request cost is implemented in a single object, the 'cost tracker'. It
  uses a fixed cost table with a global 'correction factor'. Benchmark code
  is included and can be run at any time to adapt costs to low-level
  implementation changes.
- reimplements flowcontrol.ClientManager in a cleaner and more efficient
  way, with added capabilities: There is now control over bandwidth, which
  allows using the flow control parameters for client prioritization.
  Target utilization over 100 percent is now supported to model concurrent
  request processing. Total serving bandwidth is reduced during block
  processing to prevent database contention.
- implements an RPC API for the LES servers allowing server operators to
  assign priority bandwidth to certain clients and change prioritized
  status even while the client is connected. The new API is meant for
  cases where server operators charge for LES using an off-protocol mechanism.
- adds a unit test for the new client manager.
- adds an end-to-end test using the network simulator that tests bandwidth
  control functions through the new API.
2019-02-26 12:32:48 +01:00
b00ris
769657060e les: implement ultralight client (#16904)
For more information about this light client mode, read
https://hackmd.io/s/HJy7jjZpm
2019-01-24 12:18:26 +01:00
Péter Szilágyi
434dd5bc00
cmd, core, eth, light, trie: add trie read caching layer 2018-11-15 12:22:13 +02:00
Péter Szilágyi
e8f229b82e
cmd, core, eth, miner, params: configurable gas floor and ceil 2018-08-29 12:40:12 +03:00
gary rong
c1c003e4ff consensus, miner: stale block mining support (#17506)
* consensus, miner: stale block supporting

* consensus, miner: refactor seal signature

* cmd, consensus, eth: add miner noverify flag

* cmd, consensus, miner: polish
2018-08-28 16:59:05 +03:00
Péter Szilágyi
92381ee009
cmd, eth: clean up miner startup API, drop noop config field 2018-08-23 14:09:45 +03:00
gary rong
b2c644ffb5 cmd, eth, miner: make recommit configurable (#17444)
* cmd, eth, miner: make recommit configurable

* cmd, eth, les, miner: polish a bit

* miner: filter duplicate sealing work

* cmd: remove uncessary conversion

* miner: avoid microptimization in favor of cleaner code
2018-08-21 22:56:54 +03:00
Felix Lange
9d06026c19 all: regenerate codecs with gencodec commit 90983d99de (#15830)
Fixes #15777 because null is now allowed for hexutil.Bytes.
2018-01-08 15:13:22 +02:00
Felix Lange
5c2f1e0014 all: update generated code (#15808)
* core/types, core/vm, eth, tests: regenerate gencodec files

* Makefile: update devtools target

Install protoc-gen-go and print reminders about npm, solc and protoc.
Also switch to github.com/kevinburke/go-bindata because it's more
maintained.

* contracts/ens: update contracts and regenerate with solidity v0.4.19

The newer upstream version of the FIFSRegistrar contract doesn't set the
resolver anymore. The resolver is now deployed separately.

* contracts/release: regenerate with solidity v0.4.19

* contracts/chequebook: fix fallback and regenerate with solidity v0.4.19

The contract didn't have a fallback function, payments would be rejected
when compiled with newer solidity. References to 'mortal' and 'owned'
use the local file system so we can compile without network access.

* p2p/discv5: regenerate with recent stringer

* cmd/faucet: regenerate

* dashboard: regenerate

* eth/tracers: regenerate

* internal/jsre/deps: regenerate

* dashboard: avoid sed -i because it's not portable

* accounts/usbwallet/internal/trezor: fix go generate warnings
2018-01-08 14:15:57 +02:00
gary rong
f14047dae5 cmd, consensus, eth: split ethash related config to it own (#15520)
* cmd, consensus, eth: split ethash related config to it own

* eth, consensus: minor polish

* eth, consenus, console: compress pow testing config field to single one

* consensus, eth: document pow mode
2017-11-24 16:10:27 +02:00
Péter Szilágyi
b0ca1b67ce
eth: use maxpeers from p2p layer instead of extra config 2017-09-05 19:18:28 +03:00
Péter Szilágyi
08959bbc70
cmd, core, eth: configurable txpool parameters 2017-05-29 11:29:46 +03:00
Péter Szilágyi
e61035c5a3
cmd, eth, les, mobile: make networkid uint64 everywhere 2017-04-25 14:53:50 +03:00
bas-vk
5e29f4be93 cmd/utils, node: remove unused solc references and improve RPC config (#14324)
Currently http cors and websocket origins are a comma separated string in the
config object. These are replaced with string arrays that are more expressive in
case of a config file.
2017-04-12 23:04:14 +02:00
Felix Lange
30d706c35e cmd/geth: add --config file flag (#13875)
* p2p/discover, p2p/discv5: add marshaling methods to Node

* p2p/netutil: make Netlist decodable from TOML

* common/math: encode nil HexOrDecimal256 as 0x0

* cmd/geth: add --config file flag

* cmd/geth: add missing license header

* eth: prettify Config again, fix tests

* eth: use gasprice.Config instead of duplicating its fields

* eth/gasprice: hide nil default from dumpconfig output

* cmd/geth: hide genesis block in dumpconfig output

* node: make tests compile

* console: fix tests

* cmd/geth: make TOML keys look exactly like Go struct fields

* p2p: use discovery by default

This makes the zero Config slightly more useful. It also fixes package
node tests because Node detects reuse of the datadir through the
NodeDatabase.

* cmd/geth: make ethstats URL settable through config file

* cmd/faucet: fix configuration

* cmd/geth: dedup attach tests

* eth: add comment for DefaultConfig

* eth: pass downloader.SyncMode in Config

This removes the FastSync, LightSync flags in favour of a more
general SyncMode flag.

* cmd/utils: remove jitvm flags

* cmd/utils: make mutually exclusive flag error prettier

It now reads:

   Fatal: flags --dev, --testnet can't be used at the same time

* p2p: fix typo

* node: add DefaultConfig, use it for geth

* mobile: add missing NoDiscovery option

* cmd/utils: drop MakeNode

This exposed a couple of places that needed to be updated to use
node.DefaultConfig.

* node: fix typo

* eth: make fast sync the default mode

* cmd/utils: remove IPCApiFlag (unused)

* node: remove default IPC path

Set it in the frontends instead.

* cmd/geth: add --syncmode

* cmd/utils: make --ipcdisable and --ipcpath mutually exclusive

* cmd/utils: don't enable WS, HTTP when setting addr

* cmd/utils: fix --identity
2017-04-12 17:27:23 +03:00