Commit Graph

84 Commits

Author SHA1 Message Date
Péter Szilágyi
c368f728c1
Revert "eth: drop eth/65, the last non-reqid protocol version" (#23426) 2021-08-20 15:14:21 +03:00
Péter Szilágyi
d3f018fde8
eth: drop eth/65, the last non-reqid protocol version 2021-06-29 12:31:30 +03:00
Péter Szilágyi
7e915ee379
core, eth, miner: enforce configured mining reward post 1559 too 2021-06-04 10:18:37 +03:00
Zou Guangxian
955727181b
eth: fix corner case in sync head determination (#21695)
This avoids synchronisation failures when the local header is ahead of
the local full block.
2021-03-26 18:06:25 +01:00
Péter Szilágyi
e3430ac7df
eth: check snap satelliteness, delegate drop to eth (#22235)
* eth: check snap satelliteness, delegate drop to eth

* eth: better handle eth/snap satellite relation, merge reg/unreg paths
2021-02-02 10:44:36 +02:00
Martin Holst Swende
d2779ed7ac
eth, p2p: reserve half peer slots for snap peers during snap sync (#22171)
* eth, p2p: reserve half peer slots for snap peers during snap sync

* eth: less logging

* eth: rework the eth/snap peer reservation logic

* eth: rework the eth/snap peer reservation logic (again)
2021-01-25 20:06:52 +02:00
Péter Szilágyi
017831dd5b
core, eth: split eth package, implement snap protocol (#21482)
This commit splits the eth package, separating the handling of eth and snap protocols. It also includes the capability to run snap sync (https://github.com/ethereum/devp2p/blob/master/caps/snap.md) , but does not enable it by default. 

Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Martin Holst Swende <martin@swende.se>
2020-12-14 10:27:15 +01:00
Péter Szilágyi
8cbdc8638f
core: define and test chain rewind corner cases (#21409)
* core: define and test chain reparation cornercases

* core: write up a variety of set-head tests

* core, eth: unify chain rollbacks, handle all the cases

* core: make linter smile

* core: remove commented out legacy code

* core, eth/downloader: fix review comments

* core: revert a removed recovery mechanism
2020-08-20 13:01:24 +03:00
Felix Lange
9219e0fba4
eth: interrupt chain insertion on shutdown (#21114)
This adds a new API method on core.BlockChain to allow interrupting
running data inserts, and calls the method before shutting down the
downloader.

The BlockChain interrupt checks are now done through a method instead
of inlining the atomic load everywhere. There is no loss of efficiency from
this and it makes the interrupt protocol a lot clearer because the check is
defined next to the method that sets the flag.
2020-05-26 21:37:37 +02:00
Martin Michlmayr
4f2784b38f
all: fix typos in comments (#21118) 2020-05-25 10:21:28 +02:00
Martin Holst Swende
4535230059
cmd, core, eth: background transaction indexing (#20302)
* cmd, core, eth: init tx lookup in background

* core/rawdb: tiny log fixes to make it clearer what's happening

* core, eth: fix rebase errors

* core/rawdb: make reindexing less generic, but more optimal

* rlp: implement rlp list iterator

* core/rawdb: new implementation of tx indexing/unindex using generic tx iterator and hashing rlp-data

* core/rawdb, cmd/utils: fix review concerns

* cmd/utils: fix merge issue

* core/rawdb: add some log formatting polishes

Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: Péter Szilágyi <peterke@gmail.com>
2020-05-11 18:58:43 +03:00
Péter Szilágyi
b0bbd47185
eth: fix shutdown regression to abort downloads, not just cancel 2020-04-27 11:22:15 +03:00
Felix Lange
d6c5f2417c
eth: improve shutdown synchronization (#20695)
* eth: improve shutdown synchronization

Most goroutines started by eth.Ethereum didn't have any shutdown sync at
all, which lead to weird error messages when quitting the client.

This change improves the clean shutdown path by stopping all internal
components in dependency order and waiting for them to actually be
stopped before shutdown is considered done. In particular, we now stop
everything related to peers before stopping 'resident' parts such as
core.BlockChain.

* eth: rewrite sync controller

* eth: remove sync start debug message

* eth: notify chainSyncer about new peers after handshake

* eth: move downloader.Cancel call into chainSyncer

* eth: make post-sync block broadcast synchronous

* eth: add comments

* core: change blockchain stop message

* eth: change closeBloomHandler channel type
2020-03-27 15:03:20 +02:00
Péter Szilágyi
dc6e98d2a8
eth: when triggering a sync, check the head header TD, not block 2020-03-18 14:33:06 +02:00
Péter Szilágyi
9938d954c8
eth: rework tx fetcher to use O(1) ops + manage network requests 2020-02-13 15:27:15 +02:00
rjl493456442
049e17116e
core, eth: implement eth/65 transaction fetcher 2020-02-11 13:56:36 +02:00
gary rong
fd072c2fd1 eth: fix sync bloom panic (#19757)
* eth: fix sync bloom panic

* eth: delete useless test cases
2019-06-26 11:00:21 +03:00
Péter Szilágyi
ed47f29bc8
eth: enforce chain above CHT before accepting txs into the pool 2019-04-26 12:45:12 +03:00
Péter Szilágyi
38f6b85638
eth, les, light: enforce CHT checkpoints on fast-sync too 2019-04-17 13:16:15 +03:00
Felix Lange
30cd5c1854
all: new p2p node representation (#17643)
Package p2p/enode provides a generalized representation of p2p nodes
which can contain arbitrary information in key/value pairs. It is also
the new home for the node database. The "v4" identity scheme is also
moved here from p2p/enr to remove the dependency on Ethereum crypto from
that package.

Record signature handling is changed significantly. The identity scheme
registry is removed and acceptable schemes must be passed to any method
that needs identity. This means records must now be validated explicitly
after decoding.

The enode API is designed to make signature handling easy and safe: most
APIs around the codebase work with enode.Node, which is a wrapper around
a valid record. Going from enr.Record to enode.Node requires a valid
signature.

* p2p/discover: port to p2p/enode

This ports the discovery code to the new node representation in
p2p/enode. The wire protocol is unchanged, this can be considered a
refactoring change. The Kademlia table can now deal with nodes using an
arbitrary identity scheme. This requires a few incompatible API changes:

  - Table.Lookup is not available anymore. It used to take a public key
    as argument because v4 protocol requires one. Its replacement is
    LookupRandom.
  - Table.Resolve takes *enode.Node instead of NodeID. This is also for
    v4 protocol compatibility because nodes cannot be looked up by ID
    alone.
  - Types Node and NodeID are gone. Further commits in the series will be
    fixes all over the the codebase to deal with those removals.

* p2p: port to p2p/enode and discovery changes

This adapts package p2p to the changes in p2p/discover. All uses of
discover.Node and discover.NodeID are replaced by their equivalents from
p2p/enode.

New API is added to retrieve the enode.Node instance of a peer. The
behavior of Server.Self with discovery disabled is improved. It now
tries much harder to report a working IP address, falling back to
127.0.0.1 if no suitable address can be determined through other means.
These changes were needed for tests of other packages later in the
series.

* p2p/simulations, p2p/testing: port to p2p/enode

No surprises here, mostly replacements of discover.Node, discover.NodeID
with their new equivalents. The 'interesting' API changes are:

 - testing.ProtocolSession tracks complete nodes, not just their IDs.
 - adapters.NodeConfig has a new method to create a complete node.

These changes were needed to make swarm tests work.

Note that the NodeID change makes the code incompatible with old
simulation snapshots.

* whisper/whisperv5, whisper/whisperv6: port to p2p/enode

This port was easy because whisper uses []byte for node IDs and
URL strings in the API.

* eth: port to p2p/enode

Again, easy to port because eth uses strings for node IDs and doesn't
care about node information in any way.

* les: port to p2p/enode

Apart from replacing discover.NodeID with enode.ID, most changes are in
the server pool code. It now deals with complete nodes instead
of (Pubkey, IP, Port) triples. The database format is unchanged for now,
but we should probably change it to use the node database later.

* node: port to p2p/enode

This change simply replaces discover.Node and discover.NodeID with their
new equivalents.

* swarm/network: port to p2p/enode

Swarm has its own node address representation, BzzAddr, containing both
an overlay address (the hash of a secp256k1 public key) and an underlay
address (enode:// URL).

There are no changes to the BzzAddr format in this commit, but certain
operations such as creating a BzzAddr from a node ID are now impossible
because node IDs aren't public keys anymore.

Most swarm-related changes in the series remove uses of
NewAddrFromNodeID, replacing it with NewAddr which takes a complete node
as argument. ToOverlayAddr is removed because we can just use the node
ID directly.
2018-09-25 00:59:00 +02:00
gary rong
77da203547 eth: update higest block we know during the sync if a higher was found (#16283)
* eth: update higest block we know during the sync if a higher was found

* eth: avoid useless sync in fast sync
2018-03-09 11:51:30 +02:00
Péter Szilágyi
57fd2da0fe
eth: only disable fast sync after success 2018-02-11 17:25:00 +02:00
Péter Szilágyi
f30179d62e
eth: disable fast sync after pivot is committed 2017-09-06 15:02:44 +03:00
Egon Elbre
8f06b7980d eth: fix megacheck warnings 2017-08-07 19:54:20 +03:00
Péter Szilágyi
afdd23b5ca
eth: don't import propagated blocks during fastsync 2017-05-26 16:04:12 +03:00
Péter Szilágyi
bfe5eb7f8c eth: accept transactions when starting CPU mining (#13882) 2017-04-10 10:43:01 +02:00
Péter Szilágyi
bd2c54fa9f
eth: announce block after sync cycle (star topology) 2017-04-09 20:12:46 +03:00
Péter Szilágyi
9b84caf3a5 core, eth, les: support resuming fast sync on heavy rollback (#3743) 2017-03-22 01:37:24 +01:00
Péter Szilágyi
9184249b39 Logger updates 3 (#3730)
* accounts, cmd, eth, ethdb: port logs over to new system

* ethdb: drop concept of cache distribution between dbs

* eth: fix some log nitpicks to make them nicer
2017-03-02 14:06:16 +01:00
Péter Szilágyi
d4fd06c3dc
all: blidly swap out glog to our log15, logs need rework 2017-02-23 12:16:44 +02:00
Zsolt Felfoldi
12379c697a les: remove delayed les server starting 2017-01-26 04:23:53 +01:00
Felix Lange
a98e8c0889 Merge pull request #3413 from zsfelfoldi/light-topic4
les, p2p/discv5: implement server pool, improve peer selection, light fetcher and topic searching
2016-12-12 20:46:15 +01:00
bas-vk
4e36b1e3da core: bugfix state change race condition in txpool (#3412)
The transaction pool keeps track of the current nonce in its local pendingState. When a
new block comes in the pendingState is reset. During the reset it fetches multiple times
the current state through the use of the currentState callback. When a second block comes
in during the reset its possible that the state changes during the reset. If that block
holds transactions that are currently in the pool the local pendingState that is used to
determine nonces can get out of sync.
2016-12-10 23:54:58 +01:00
Zsolt Felfoldi
c57c54ce96 eth, les: defer starting LES service until ETH initial sync is finished 2016-12-10 09:53:25 +01:00
Péter Szilágyi
0ef327bbee core, eth, internal, miner: optimize txpool for quick ops 2016-09-02 14:12:03 +03:00
Péter Szilágyi
1dd272080d eth, eth/downloader: better remote head tracking 2016-07-25 15:14:14 +03:00
zsfelfoldi
f9917c8c7b core: improved chainDb using sequential keys 2016-06-07 16:38:56 +02:00
Péter Szilágyi
32559ccad1 eth: don't accept transactions until we sync up with the network 2016-06-06 14:45:38 +03:00
Péter Szilágyi
d87f7a1e81 eth: skip transaction handling during fast sync 2016-05-17 14:17:20 +03:00
Felix Lange
56ed6152a1 core, eth, miner: improve shutdown synchronisation
Shutting down geth prints hundreds of annoying error messages in some
cases. The errors appear because the Stop method of eth.ProtocolManager,
miner.Miner and core.TxPool is asynchronous. Left over peer sessions
generate events which are processed after Stop even though the database
has already been closed.

The fix is to make Stop synchronous using sync.WaitGroup.

For eth.ProtocolManager, in order to make use of WaitGroup safe, we need
a way to stop new peer sessions from being added while waiting on the
WaitGroup. The eth protocol Run function now selects on a signaling
channel and adds to the WaitGroup only if ProtocolManager is not
shutting down.

For miner.worker and core.TxPool the number of goroutines is static,
WaitGroup can be used in the usual way without additional
synchronisation.
2016-05-09 13:03:08 +02:00
Felix Lange
db52a6a0ff eth: remove workaround for asynchronous processing in the downloader 2015-11-19 14:18:34 +01:00
Péter Szilágyi
2019ed71b4 eth: don't block sync goroutines that short circuit 2015-10-28 16:41:01 +02:00
Péter Szilágyi
5b0ee8ec30 core, eth, trie: fix data races and merge/review issues 2015-10-21 16:49:55 +03:00
Péter Szilágyi
c33cc382b3 core: support inserting pure header chains 2015-10-19 10:03:09 +03:00
Jeffrey Wilcke
7c7692933c cmd/geth, cmd/utils, core, rpc: renamed to blockchain
* Renamed ChainManager to BlockChain
* Checkpointing is no longer required and never really properly worked
when the state was corrupted.
2015-10-04 01:13:56 +02:00
Péter Szilágyi
6adbaabc65 eth, eth/downloader: don't report stall if fetcher filled the block 2015-07-29 15:39:08 +03:00
Felix Lange
bfbcfbe4a9 all: fix license headers one more time
I forgot to update one instance of "go-ethereum" in commit 3f047be5a.
2015-07-23 18:35:11 +02:00
Felix Lange
3f047be5aa all: update license headers to distiguish GPL/LGPL
All code outside of cmd/ is licensed as LGPL. The headers
now reflect this by calling the whole work "the go-ethereum library".
2015-07-22 18:51:45 +02:00
Felix Lange
ea54283b30 all: update license information 2015-07-07 14:12:44 +02:00
Péter Szilágyi
6fc85f1ec2 eth: clean up peer struct a bit, fix double txn bcast 2015-06-30 19:00:01 +03:00