This change
- implements concurrent LES request serving even for a single peer.
- replaces the request cost estimation method with a cost table based on
benchmarks which gives much more consistent results. Until now the
allowed number of light peers was just a guess which probably contributed
a lot to the fluctuating quality of available service. Everything related
to request cost is implemented in a single object, the 'cost tracker'. It
uses a fixed cost table with a global 'correction factor'. Benchmark code
is included and can be run at any time to adapt costs to low-level
implementation changes.
- reimplements flowcontrol.ClientManager in a cleaner and more efficient
way, with added capabilities: There is now control over bandwidth, which
allows using the flow control parameters for client prioritization.
Target utilization over 100 percent is now supported to model concurrent
request processing. Total serving bandwidth is reduced during block
processing to prevent database contention.
- implements an RPC API for the LES servers allowing server operators to
assign priority bandwidth to certain clients and change prioritized
status even while the client is connected. The new API is meant for
cases where server operators charge for LES using an off-protocol mechanism.
- adds a unit test for the new client manager.
- adds an end-to-end test using the network simulator that tests bandwidth
control functions through the new API.
* node: close AccountsManager in new Close method
* p2p/simulations, p2p/simulations/adapters: handle node close on shutdown
* node: move node ephemeralKeystore cleanup to stop method
* node: call Stop in Node.Close method
* cmd/geth: close node.Node created with makeFullNode in cli commands
* node: close Node instances in tests
* cmd/geth, node: minor code style fixes
* cmd, console, miner, mobile: proper node Close() termination
* cmd, eth: Added in the flag to step geth once sync based on input
* cmd, eth: 16400 Add an option to stop geth once in sync.
* cmd: 16400 Add an option to stop geth once in sync. WIP
* cmd/geth/main, les/fletcher: added in light mode support
* cmd/geth/main, les/fletcher: Cleaned Comments and code for light mode
* cmd: 16400 Fixed formatting issue and cleaned code
* cmd, eth, les: 16400 Fixed formatting issues
* cmd, eth, les: Performed gofmt to update formatting
* cmd, eth, les: Fixed bugs resulting formatting
* cmd/geth, eth/, les: switched to downloader event
* eth: Fixed styling and gen_config
* eth/: Fix nil error in config file
* cmd/geth: Updated countdown log
* les/fetcher.go: Removed depcreated channel
* eth/downloader.go: Removed deprecated select
* cmd/geth, cmd/utils: Fixed minor issues
* eth: Reverted config files to proper format
* eth: Fixed typo in config file
* cmd/geth, eth/down: Updated code to use header time stamp
* eth/downloader: Changed the time threshold to 10 minutes
* cmd/geth, eth/downloader: Updated downloading event to pass latest header
* cmd/geth: Updated main to use right timer object
* cmd/geth: Removed unused failed event
* cmd/geth: added in correct time field with type assertion
* cmd/geth, cmd/utils: Updated flag to use boolean
* cmd/geth, cmd/utils, eth/downloader: Cleaned up code based on recommendations
* cmd/geth: Removed unneeded import
* cmd/geth, eth/downloader: fixed event field and suggested changes
* cmd/geth, cmd/utils: Updated flag and linting issue
This PR is replacing the metrics.influxdb.host.tag cmd-line flag with metrics.influxdb.tags - a comma-separated key/value tags, that are passed to the InfluxDB reporter, so that we can index measurements with multiple tags, and not just one host tag.
This will be useful for Swarm, where we want to index measurements not just with the host tag, but also with bzzkey and git commit version (for long-running deployments).
* Initial work on a graphql API
* Added receipts, and more transaction fields.
* Finish receipts, add logs
* Add transactionCount to block
* Add types and .
* Update Block type to be compatible with ethql
* Rename nonce to transactionCount in Account, to be compatible with ethql
* Update transaction, receipt and log to match ethql
* Add query operator, for a range of blocks
* Added ommerCount to Block
* Add transactionAt and ommerAt to Block
* Added sendRawTransaction mutation
* Add Call and EstimateGas to graphQL API
* Refactored to use hexutil.Bytes instead of HexBytes
* Replace BigNum with hexutil.Big
* Refactor call and estimateGas to use ethapi struct type
* Replace ethgraphql.Address with common.Address
* Replace ethgraphql.Hash with common.Hash
* Converted most quantities to Long instead of Int
* Add support for logs
* Fix bug in runFilter
* Restructured Transaction to work primarily with headers, so uncle data is reported properly
* Add gasPrice API
* Add protocolVersion API
* Add syncing API
* Moved schema into its own source file
* Move some single use args types into anonymous structs
* Add doc-comments
* Fixed backend fetching to use context
* Added (very) basic tests
* Add documentation to the graphql schema
* Fix reversion for formatting of big numbers
* Correct spelling error
* s/BigInt/Long/
* Update common/types.go
* Fixes in response to review
* Fix lint error
* Updated calls on private functions
* Fix typo in graphql.go
* Rollback ethapi breaking changes for graphql support
Co-Authored-By: Arachnid <arachnid@notdot.net>
* geth/core/eth: implement constantinople override flag
* les: implemnent constantinople override flag for les clients
* cmd/geth, eth, les: fix typo, move flag to experimentals
* Rejects peers that respond with a different hash for any of the passed in block numbers.
* Meant for emergency situations when the network forks unexpectedly.
Interpreter initialization is left to the PRs implementing them.
Options for external interpreters are passed after a colon in the
`--vm.ewasm` and `--vm.evm` switches.
* cmd,node,rpc: add allowedHosts to prevent dns rebinding attacks
* p2p,node: Fix bug with dumpconfig introduced in r54aeb8e4c0bb9f0e7a6c67258af67df3b266af3d
* rpc: add wildcard support for rpcallowedhosts + go fmt
* cmd/geth, cmd/utils, node, rpc: ignore direct ip(v4/6) addresses in rpc virtual hostnames check
* http, rpc, utils: make vhosts into map, address review concerns
* node: change log messages to use geth standard (not sprintf)
* rpc: fix spelling
* cmd, consensus, core, miner: instatx clique for --dev
* cmd, consensus, clique: support configurable --dev block times
* cmd, core: allow --dev to use persistent storage too
* core: reduce txpool event loop goroutines and sync structs
* cmd, core, eth: journal local transactions to disk
* core: journal replacement pending transactions too
* core: separate transaction journal from pool
Currently http cors and websocket origins are a comma separated string in the
config object. These are replaced with string arrays that are more expressive in
case of a config file.
* p2p/discover, p2p/discv5: add marshaling methods to Node
* p2p/netutil: make Netlist decodable from TOML
* common/math: encode nil HexOrDecimal256 as 0x0
* cmd/geth: add --config file flag
* cmd/geth: add missing license header
* eth: prettify Config again, fix tests
* eth: use gasprice.Config instead of duplicating its fields
* eth/gasprice: hide nil default from dumpconfig output
* cmd/geth: hide genesis block in dumpconfig output
* node: make tests compile
* console: fix tests
* cmd/geth: make TOML keys look exactly like Go struct fields
* p2p: use discovery by default
This makes the zero Config slightly more useful. It also fixes package
node tests because Node detects reuse of the datadir through the
NodeDatabase.
* cmd/geth: make ethstats URL settable through config file
* cmd/faucet: fix configuration
* cmd/geth: dedup attach tests
* eth: add comment for DefaultConfig
* eth: pass downloader.SyncMode in Config
This removes the FastSync, LightSync flags in favour of a more
general SyncMode flag.
* cmd/utils: remove jitvm flags
* cmd/utils: make mutually exclusive flag error prettier
It now reads:
Fatal: flags --dev, --testnet can't be used at the same time
* p2p: fix typo
* node: add DefaultConfig, use it for geth
* mobile: add missing NoDiscovery option
* cmd/utils: drop MakeNode
This exposed a couple of places that needed to be updated to use
node.DefaultConfig.
* node: fix typo
* eth: make fast sync the default mode
* cmd/utils: remove IPCApiFlag (unused)
* node: remove default IPC path
Set it in the frontends instead.
* cmd/geth: add --syncmode
* cmd/utils: make --ipcdisable and --ipcpath mutually exclusive
* cmd/utils: don't enable WS, HTTP when setting addr
* cmd/utils: fix --identity
This commit adds pluggable consensus engines to go-ethereum. In short, it
introduces a generic consensus interface, and refactors the entire codebase to
use this interface.
* accounts, cmd, eth, ethdb: port logs over to new system
* ethdb: drop concept of cache distribution between dbs
* eth: fix some log nitpicks to make them nicer
This command was meant as a hackish way to upgrade our chain database way back
when nobody cared for live updates and the size of the database along with its
import times was small. With the current database weighing hundreds of GBs and
processing times of many days, this command is just ludicrous.
* cmd/geth: added 'geth bug' command
Added bug command to geth, which will open a browser window
with an issue template and some additional system information.
* cmd/geth: update bug with better infos
* cmd/geth: added browser fallback
* cmd/geth: govet yo momma
Reworked the EVM gas instructions to use 64bit integers rather than
arbitrary size big ints. All gas operations, be it additions,
multiplications or divisions, are checked and guarded against 64 bit
integer overflows.
In additon, most of the protocol paramaters in the params package have
been converted to uint64 and are now constants rather than variables.
* common/math: added overflow check ops
* core: vmenv, env renamed to evm
* eth, internal/ethapi, les: unmetered eth_call and cancel methods
* core/vm: implemented big.Int pool for evm instructions
* core/vm: unexported intPool methods & verification methods
* core/vm: added memoryGasCost overflow check and test
- Handle a data race where a Ledger drops between list and open
- Prolong Ledger tx confirmation window to 30 days from 1 minute
- Simplify Ledger chainid-signature calculation and validation
- Simplify Ledger USB APDU request chunking algorithm
- Silence keystore account cache notifications for manual actions
- Only enable self derivations if wallet open succeeds
Reworked the EVM gas instructions to use 64bit integers rather than
arbitrary size big ints. All gas operations, be it additions,
multiplications or divisions, are checked and guarded against 64 bit
integer overflows.
In additon, most of the protocol paramaters in the params package have
been converted to uint64 and are now constants rather than variables.
* common/math: added overflow check ops
* core: vmenv, env renamed to evm
* eth, internal/ethapi, les: unmetered eth_call and cancel methods
* core/vm: implemented big.Int pool for evm instructions
* core/vm: unexported intPool methods & verification methods
* core/vm: added memoryGasCost overflow check and test
