* cmd, eth, miner: disable advance sealing if user require
* cmd, console, miner, les, eth: wrap the miner config
* eth: remove todo
* cmd, miner: revert noadvance flag
The reason for this is: if the transaction execution is even longer
than block time, then this kind of transactions is DoS attack.
* swarm/api: fix file descriptor leak in NewTestSwarmServer
Swarm storage (localstore) was not closed. That resulted a
"too many open files" error if `TestClientUploadDownloadRawEncrypted`
was run with `-count 1000`.
* cmd/swarm: speed up StartNewNodes() by parallelization
Reduce cluster startup time from 13s to 7s.
* swarm/api: disable flaky TestClientUploadDownloadRawEncrypted with -race
* swarm/storage: disable flaky TestLDBStoreCollectGarbage (-race)
With race detection turned on the disabled cases often fail with:
"ldbstore_test.go:535: expected surplus chunk 150 to be missing, but got no error"
* cmd/swarm: fix process leak in TestACT and TestSwarmUp
Each test run we start 3 nodes, but we did not terminate them. So
those 3 nodes continued eating up 1.2GB (3.4GB with -race) after test
completion.
6b6c4d1c27 changed how we start clusters
to speed up tests. The changeset merged together test cases
and introduced a global cluster. But "forgot" about termination.
Let's get rid of "global cluster" so we have a clear owner of
termination (some time sacrifice), while leaving subtests to use the
same cluster.
This PR will will break existing UIs, since it changes all calls like ApproveSignTransaction to be on the form ui_approveSignTransaction.
This is to make it possible for the UI to reuse the json-rpc library from go-ethereum, which uses this convention.
Also, this PR removes some unused structs, after import/export were removed from the external api (so no longer needs internal methods for approval)
One more breaking change is introduced, removing passwords from the ApproveSignTxResponse and the likes. This makes the manual interface more like the rulebased interface, and integrates nicely with the credential storage. Thus, the way it worked before, it would be tempting for the UI to implement 'remember password' functionality. The way it is now, it will be easy instead to tell clef to store passwords and use them.
If a pw is not found in the credential store, the user is prompted to provide the password.
This change
- implements concurrent LES request serving even for a single peer.
- replaces the request cost estimation method with a cost table based on
benchmarks which gives much more consistent results. Until now the
allowed number of light peers was just a guess which probably contributed
a lot to the fluctuating quality of available service. Everything related
to request cost is implemented in a single object, the 'cost tracker'. It
uses a fixed cost table with a global 'correction factor'. Benchmark code
is included and can be run at any time to adapt costs to low-level
implementation changes.
- reimplements flowcontrol.ClientManager in a cleaner and more efficient
way, with added capabilities: There is now control over bandwidth, which
allows using the flow control parameters for client prioritization.
Target utilization over 100 percent is now supported to model concurrent
request processing. Total serving bandwidth is reduced during block
processing to prevent database contention.
- implements an RPC API for the LES servers allowing server operators to
assign priority bandwidth to certain clients and change prioritized
status even while the client is connected. The new API is meant for
cases where server operators charge for LES using an off-protocol mechanism.
- adds a unit test for the new client manager.
- adds an end-to-end test using the network simulator that tests bandwidth
control functions through the new API.
* swarm/storage/mock: implement listings methods for mem and rpc stores
* swarm/storage/mock/rpc: add comments and newTestStore helper function
* swarm/storage/mock/mem: add missing comments
* swarm/storage/mock: add comments to new types and constants
* swarm/storage/mock/db: implement listings for mock/db global store
* swarm/storage/mock/test: add comments for MockStoreListings
* swarm/storage/mock/explorer: initial implementation
* cmd/swarm/global-store: add chunk explorer
* cmd/swarm/global-store: add chunk explorer tests
* swarm/storage/mock/explorer: add tests
* swarm/storage/mock/explorer: add swagger api definition
* swarm/storage/mock/explorer: not-zero test values for invalid addr and key
* swarm/storage/mock/explorer: test wildcard cors origin
* swarm/storage/mock/db: renames based on Fabio's suggestions
* swarm/storage/mock/explorer: add more comments to testHandler function
* cmd/swarm/global-store: terminate subprocess with Kill in tests
This changes default location of the data directory to use the LOCALAPPDATA
environment variable, resolving issues with remote home directories an improving
compatibility with Cygwin.
Fixes#2239Fixes#2237Fixes#16437
* signer/clef: make use of json-rpc notification
* signer: tidy up output of OnApprovedTx
* accounts/external, signer: implement remote signing of text, make accounts_sign take hexdata
* clef: added basic testscript
* signer, external, api: add clique signing test to debug rpc, fix clique signing in clef
* signer: fix clique interoperability between geth and clef
* clef: rename networkid switch to chainid
* clef: enable chainid flag
* clef, signer: minor changes from review
* clef: more tests for signer
* common/fdlimit: cap on MacOS file limits, fixes#18994
* common/fdlimit: fix Maximum-check to respect OPEN_MAX
* common/fdlimit: return error if OPEN_MAX is exceeded in Raise()
* common/fdlimit: goimports
* common/fdlimit: check value after setting fdlimit
* common/fdlimit: make comment a bit more descriptive
* cmd/utils: make fdlimit happy path a bit cleaner
* node: close AccountsManager in new Close method
* p2p/simulations, p2p/simulations/adapters: handle node close on shutdown
* node: move node ephemeralKeystore cleanup to stop method
* node: call Stop in Node.Close method
* cmd/geth: close node.Node created with makeFullNode in cli commands
* node: close Node instances in tests
* cmd/geth, node: minor code style fixes
* cmd, console, miner, mobile: proper node Close() termination
* Named functions and defined a basic EIP191 content type list
* Written basic content type functions
* Added ecRecover method in the clef api
* Updated the extapi changelog and addded indications in the README
* Changed the version of the external API
* Added tests for 0x45
* Implementing UnmarshalJSON() for TypedData
* Working on TypedData
* Solved the auditlog issue
* Changed method to signTypedData
* Changed mimes and implemented the 'encodeType' function for EIP-712
* Polished docstrings, ran goimports and swapped fmt.Errorf with errors.New where possible
* Drafted recursive encodeData
* Ran goimports and gofmt
* Drafted first version of EIP-712, including tests
* Temporarily switched to using common.Address in tests
* Drafted text/validator and and rewritten []byte as hexutil.Bytes
* Solved stringified address encoding issue
* Changed the property type required by signData from bytes to interface{}
* Fixed bugs in 'data/typed' signs
* Brought legal warning back after temporarily disabling it for development
* Added example RPC calls for account_signData and account_signTypedData
* Named functions and defined a basic EIP191 content type list
* Written basic content type functions
* Added ecRecover method in the clef api
* Updated the extapi changelog and addded indications in the README
* Added tests for 0x45
* Implementing UnmarshalJSON() for TypedData
* Working on TypedData
* Solved the auditlog issue
* Changed method to signTypedData
* Changed mimes and implemented the 'encodeType' function for EIP-712
* Polished docstrings, ran goimports and swapped fmt.Errorf with errors.New where possible
* Drafted recursive encodeData
* Ran goimports and gofmt
* Drafted first version of EIP-712, including tests
* Temporarily switched to using common.Address in tests
* Drafted text/validator and and rewritten []byte as hexutil.Bytes
* Solved stringified address encoding issue
* Changed the property type required by signData from bytes to interface{}
* Fixed bugs in 'data/typed' signs
* Brought legal warning back after temporarily disabling it for development
* Added example RPC calls for account_signData and account_signTypedData
* Polished and fixed PR
* Polished and fixed PR
* Solved malformed data panics and also wrote tests
* Solved malformed data panics and also wrote tests
* Added alphabetical sorting to type dependencies
* Added alphabetical sorting to type dependencies
* Added pretty print to data/typed UI
* Added pretty print to data/typed UI
* signer: more tests for typed data
* signer: more tests for typed data
* Fixed TestMalformedData4 errors and renamed IsValid to Validate
* Fixed TestMalformedData4 errors and renamed IsValid to Validate
* Fixed more new failing tests and deanonymised some functions
* Fixed more new failing tests and deanonymised some functions
* Added types to EIP712 output in cliui
* Added types to EIP712 output in cliui
* Fixed regexp issues
* Fixed regexp issues
* Added pseudo-failing test
* Added pseudo-failing test
* Fixed false positive test
* Fixed false positive test
* Added PrettyPrint method
* Added PrettyPrint method
* signer: refactor formatting and UI
* signer: make ui use new message format for signing
* Fixed breaking changes
* Fixed rules_test failing test
* Added extra regexp for reference types
* signer: more hard types
* Fixed failing test, formatted files
* signer: use golang/x keccak
* Fixed goimports error
* clef, signer: address some review concerns
* Implemented latest recommendations
* Fixed comments and uintint256 issue
* accounts, signer: fix mimetypes, add interface to sign data with passphrase
* signer, accounts: remove duplicated code, pass hash preimages to signing
* signer: prevent panic in type assertions, make cliui print rawdata as quotable-safe
* signer: linter fixes, remove deprecated crypto dependency
* accounts: fix goimport
* cmd, eth: Added in the flag to step geth once sync based on input
* cmd, eth: 16400 Add an option to stop geth once in sync.
* cmd: 16400 Add an option to stop geth once in sync. WIP
* cmd/geth/main, les/fletcher: added in light mode support
* cmd/geth/main, les/fletcher: Cleaned Comments and code for light mode
* cmd: 16400 Fixed formatting issue and cleaned code
* cmd, eth, les: 16400 Fixed formatting issues
* cmd, eth, les: Performed gofmt to update formatting
* cmd, eth, les: Fixed bugs resulting formatting
* cmd/geth, eth/, les: switched to downloader event
* eth: Fixed styling and gen_config
* eth/: Fix nil error in config file
* cmd/geth: Updated countdown log
* les/fetcher.go: Removed depcreated channel
* eth/downloader.go: Removed deprecated select
* cmd/geth, cmd/utils: Fixed minor issues
* eth: Reverted config files to proper format
* eth: Fixed typo in config file
* cmd/geth, eth/down: Updated code to use header time stamp
* eth/downloader: Changed the time threshold to 10 minutes
* cmd/geth, eth/downloader: Updated downloading event to pass latest header
* cmd/geth: Updated main to use right timer object
* cmd/geth: Removed unused failed event
* cmd/geth: added in correct time field with type assertion
* cmd/geth, cmd/utils: Updated flag to use boolean
* cmd/geth, cmd/utils, eth/downloader: Cleaned up code based on recommendations
* cmd/geth: Removed unneeded import
* cmd/geth, eth/downloader: fixed event field and suggested changes
* cmd/geth, cmd/utils: Updated flag and linting issue
This PR is replacing the metrics.influxdb.host.tag cmd-line flag with metrics.influxdb.tags - a comma-separated key/value tags, that are passed to the InfluxDB reporter, so that we can index measurements with multiple tags, and not just one host tag.
This will be useful for Swarm, where we want to index measurements not just with the host tag, but also with bzzkey and git commit version (for long-running deployments).
This PR adds a new fork which disables EIP-1283. Internally it's called Petersburg,
but the genesis/config field is ConstantinopleFix.
The block numbers are:
7280000 for Constantinople on Mainnet
7280000 for ConstantinopleFix on Mainnet
4939394 for ConstantinopleFix on Ropsten
9999999 for ConstantinopleFix on Rinkeby (real number decided later)
This PR also defaults to using the same ConstantinopleFix number as whatever
Constantinople is set to. That is, it will default to mainnet behaviour if ConstantinopleFix
is not set.This means that for private networks which have already transitioned
to Constantinople, this PR will break the network unless ConstantinopleFix is
explicitly set!
* Initial work on a graphql API
* Added receipts, and more transaction fields.
* Finish receipts, add logs
* Add transactionCount to block
* Add types and .
* Update Block type to be compatible with ethql
* Rename nonce to transactionCount in Account, to be compatible with ethql
* Update transaction, receipt and log to match ethql
* Add query operator, for a range of blocks
* Added ommerCount to Block
* Add transactionAt and ommerAt to Block
* Added sendRawTransaction mutation
* Add Call and EstimateGas to graphQL API
* Refactored to use hexutil.Bytes instead of HexBytes
* Replace BigNum with hexutil.Big
* Refactor call and estimateGas to use ethapi struct type
* Replace ethgraphql.Address with common.Address
* Replace ethgraphql.Hash with common.Hash
* Converted most quantities to Long instead of Int
* Add support for logs
* Fix bug in runFilter
* Restructured Transaction to work primarily with headers, so uncle data is reported properly
* Add gasPrice API
* Add protocolVersion API
* Add syncing API
* Moved schema into its own source file
* Move some single use args types into anonymous structs
* Add doc-comments
* Fixed backend fetching to use context
* Added (very) basic tests
* Add documentation to the graphql schema
* Fix reversion for formatting of big numbers
* Correct spelling error
* s/BigInt/Long/
* Update common/types.go
* Fixes in response to review
* Fix lint error
* Updated calls on private functions
* Fix typo in graphql.go
* Rollback ethapi breaking changes for graphql support
Co-Authored-By: Arachnid <arachnid@notdot.net>
* geth/core/eth: implement constantinople override flag
* les: implemnent constantinople override flag for les clients
* cmd/geth, eth, les: fix typo, move flag to experimentals
* Rejects peers that respond with a different hash for any of the passed in block numbers.
* Meant for emergency situations when the network forks unexpectedly.
- Have `${DataDir}/bzzd.ipc` as IPC path default.
- Respect the `--datadir` flag.
- Keep only the global `--ipcpath` flag and drop the local `--ipcpath` flag
as flags might overwrite each other. (Note: before global `--ipcpath`
was ignored even if it was set)
fixes ethersphere#795
- Replace "crypto/rand" to "math/rand" for files content generation
- Remove swarm/network_test.go.Shuffle and swarm/btm/btm_test.go.Shuffle - because go1.9 support dropped (see https://github.com/ethereum/go-ethereum/pull/17807 and comments to swarm/network_test.go.Shuffle)
* cmd/clef: replace password arg with prompt (#17829)
Entering passwords on the command line is not secure as it is easy to recover from bash_history or the process table.
1. The clef command addpw was renamed to setpw to better describe the functionality
2. The <password> argument was removed and replaced with an interactive prompt
* cmd/clef: remove undeclared variable
This adds the global accumulated refund counter to the standard
json output as a numeric json value. Previously this was not very
interesting since it was not used much, but with the new sstore
gas changes the value is a lot more interesting from a consensus
investigation perspective.
This PR adds enode.LocalNode and integrates it into the p2p
subsystem. This new object is the keeper of the local node
record. For now, a new version of the record is produced every
time the client restarts. We'll make it smarter to avoid that in
the future.
There are a couple of other changes in this commit: discovery now
waits for all of its goroutines at shutdown and the p2p server
now closes the node database after discovery has shut down. This
fixes a leveldb crash in tests. p2p server startup is faster
because it doesn't need to wait for the external IP query
anymore.
- Mime types generator (Standard "mime" package rely on system-settings, see mime.osInitMime)
- Changed swarm/api.Upload:
- simplify I/O throttling by semaphore primitive and use file name where possible
- f.Close() must be called in Defer - otherwise panic or future added early return will cause leak of file descriptors
- one error was suppressed
When CLI tests were spanning new nodes, the log level verbosity was
hard coded as 6. So the Swarm process was always polluting the test
output with TRACE level logs.
Now `go test -v ./cmd/swarm -loglevel 0` works as expected.
* swarm/storage/mru: Adaptive Frequency
swarm/storage/mru/lookup: fixed getBaseTime
Added NewEpoch constructor
swarm/api/client: better error handling in GetResource()
swarm/storage/mru: Renamed structures.
Renamed ResourceMetadata to ResourceID.
Renamed ResourceID.Name to ResourceID.Topic
swarm/storage/mru: Added binarySerializer interface and test tools
swarm/storage/mru/lookup: Changed base time to time and + marshallers
swarm/storage/mru: Added ResourceID (former resourceMetadata)
swarm/storage/mru: Added ResourceViewId and serialization tests
swarm/storage/mru/lookup: fixed epoch unmarshaller. Added Epoch Equals
swarm/storage/mru: Fixes as per review comments
cmd/swarm: reworded resource create/update help text regarding topic
swarm/storage/mru: Added UpdateLookup and serializer tests
swarm/storage/mru: Added UpdateHeader, serializers and tests
swarm/storage/mru: changed UpdateAddr / epoch to Base()
swarm/storage/mru: Added resourceUpdate serializer and tests
swarm/storage/mru: Added SignedResourceUpdate tests and serializers
swarm/storage/mru/lookup: fixed GetFirstEpoch bug
swarm/storage/mru: refactor, comments, cleanup
Also added tests for Topic
swarm/storage/mru: handler tests pass
swarm/storage/mru: all resource package tests pass
swarm/storage/mru: resource test pass after adding
timestamp checking support
swarm/storage/mru: Added JSON serializers to ResourceIDView structures
swarm/storage/mru: Sever, client, API test pass
swarm/storage/mru: server test pass
swarm/storage/mru: Added topic length check
swarm/storage/mru: removed some literals,
improved "previous lookup" test case
swarm/storage/mru: some fixes and comments as per review
swarm/storage/mru: first working version without metadata chunk
swarm/storage/mru: Various fixes as per review
swarm/storage/mru: client test pass
swarm/storage/mru: resource query strings and manifest-less queries
swarm/storage/mru: simplify naming
swarm/storage/mru: first autofreq working version
swarm/storage/mru: renamed ToValues to AppendValues
swarm/resource/mru: Added ToValues / FromValues for URL query strings
swarm/storage/mru: Changed POST resource to work with query strings.
No more JSON.
swarm/storage/mru: removed resourceid
swarm/storage/mru: Opened up structures
swarm/storage/mru: Merged Request and SignedResourceUpdate
swarm/storage/mru: removed initial data from CLI resource create
swarm/storage/mru: Refactor Topic as a direct fixed-length array
swarm/storage/mru/lookup: Comprehensive GetNextLevel tests
swarm/storage/mru: Added comments
Added length checks in Topic
swarm/storage/mru: fixes in tests and some code comments
swarm/storage/mru/lookup: new optimized lookup algorithm
swarm/api: moved getResourceView to api out of server
swarm/storage/mru: Lookup algorithm working
swarm/storage/mru: comments and renamed NewLookupParams
Deleted commented code
swarm/storage/mru/lookup: renamed Epoch.LaterThan to After
swarm/storage/mru/lookup: Comments and tidying naming
swarm/storage/mru: fix lookup algorithm
swarm/storage/mru: exposed lookup hint
removed updateheader
swarm/storage/mru/lookup: changed GetNextEpoch for initial values
swarm/storage/mru: resource tests pass
swarm/storage/mru: valueSerializer interface and tests
swarm/storage/mru/lookup: Comments, improvements, fixes, more tests
swarm/storage/mru: renamed UpdateLookup to ID, LookupParams to Query
swarm/storage/mru: renamed query receiver var
swarm/cmd: MRU CLI tests
* cmd/swarm: remove rogue fmt
* swarm/storage/mru: Add version / header for future use
* swarm/storage/mru: Fixes/comments as per review
cmd/swarm: remove rogue fmt
swarm/storage/mru: Add version / header for future use-
* swarm/storage/mru: fix linter errors
* cmd/swarm: Speeded up TestCLIResourceUpdate
* signer: remove local path disclosure from extapi
* signer: show more data in cli ui
* rpc: make http server forward UA and Origin via Context
* signer, clef/core: ui changes + display UA and Origin
* signer: cliui - indicate less trust in remote headers, see https://github.com/ethereum/go-ethereum/issues/17637
* signer: prevent possibility swap KV-entries in aes_gcm storage, fixes#17635
* signer: remove ecrecover from external API
* signer,clef: default reject instead of warn + valideate new passwords. fixes#17632 and #17631
* signer: check calldata length even if no ABI signature is present
* signer: fix failing testcase
* clef: remove account import from external api
* signer: allow space in passwords, improve error messsage
* signer/storage: fix typos
Package p2p/enode provides a generalized representation of p2p nodes
which can contain arbitrary information in key/value pairs. It is also
the new home for the node database. The "v4" identity scheme is also
moved here from p2p/enr to remove the dependency on Ethereum crypto from
that package.
Record signature handling is changed significantly. The identity scheme
registry is removed and acceptable schemes must be passed to any method
that needs identity. This means records must now be validated explicitly
after decoding.
The enode API is designed to make signature handling easy and safe: most
APIs around the codebase work with enode.Node, which is a wrapper around
a valid record. Going from enr.Record to enode.Node requires a valid
signature.
* p2p/discover: port to p2p/enode
This ports the discovery code to the new node representation in
p2p/enode. The wire protocol is unchanged, this can be considered a
refactoring change. The Kademlia table can now deal with nodes using an
arbitrary identity scheme. This requires a few incompatible API changes:
- Table.Lookup is not available anymore. It used to take a public key
as argument because v4 protocol requires one. Its replacement is
LookupRandom.
- Table.Resolve takes *enode.Node instead of NodeID. This is also for
v4 protocol compatibility because nodes cannot be looked up by ID
alone.
- Types Node and NodeID are gone. Further commits in the series will be
fixes all over the the codebase to deal with those removals.
* p2p: port to p2p/enode and discovery changes
This adapts package p2p to the changes in p2p/discover. All uses of
discover.Node and discover.NodeID are replaced by their equivalents from
p2p/enode.
New API is added to retrieve the enode.Node instance of a peer. The
behavior of Server.Self with discovery disabled is improved. It now
tries much harder to report a working IP address, falling back to
127.0.0.1 if no suitable address can be determined through other means.
These changes were needed for tests of other packages later in the
series.
* p2p/simulations, p2p/testing: port to p2p/enode
No surprises here, mostly replacements of discover.Node, discover.NodeID
with their new equivalents. The 'interesting' API changes are:
- testing.ProtocolSession tracks complete nodes, not just their IDs.
- adapters.NodeConfig has a new method to create a complete node.
These changes were needed to make swarm tests work.
Note that the NodeID change makes the code incompatible with old
simulation snapshots.
* whisper/whisperv5, whisper/whisperv6: port to p2p/enode
This port was easy because whisper uses []byte for node IDs and
URL strings in the API.
* eth: port to p2p/enode
Again, easy to port because eth uses strings for node IDs and doesn't
care about node information in any way.
* les: port to p2p/enode
Apart from replacing discover.NodeID with enode.ID, most changes are in
the server pool code. It now deals with complete nodes instead
of (Pubkey, IP, Port) triples. The database format is unchanged for now,
but we should probably change it to use the node database later.
* node: port to p2p/enode
This change simply replaces discover.Node and discover.NodeID with their
new equivalents.
* swarm/network: port to p2p/enode
Swarm has its own node address representation, BzzAddr, containing both
an overlay address (the hash of a secp256k1 public key) and an underlay
address (enode:// URL).
There are no changes to the BzzAddr format in this commit, but certain
operations such as creating a BzzAddr from a node ID are now impossible
because node IDs aren't public keys anymore.
Most swarm-related changes in the series remove uses of
NewAddrFromNodeID, replacing it with NewAddr which takes a complete node
as argument. ToOverlayAddr is removed because we can just use the node
ID directly.
Interpreter initialization is left to the PRs implementing them.
Options for external interpreters are passed after a colon in the
`--vm.ewasm` and `--vm.evm` switches.
* ethdb: unified code comment style.
* puppeth: it is unnecessary to alloc pre-funded to 256 addresses
* Revert "puppeth: it is unnecessary to alloc pre-funded to 256 addresses"
This reverts commit 5e04fbccf0b8aca85030af1779bb7a949033d9d8.
* puppeth: fix comment typo
* Revert "ethdb: unified code comment style."
This reverts commit a581efb3f06a96fc7aec0bfae03c7b6d5a0c1a77.
* swarm: Added lightnode flag
Added --lightnode command line parameter
Added LightNode to Handshake message
* swarm/config: Fixed variable naming
* cmd/swarm: Changed BoolTFlag to BoolFlag for SwarmLightNodeEnabled
* swarm/network: Changed logging
* swarm/network: Changed protocol version testing
* swarm/network: Renamed DefaultNetworkID variable to TestProtocolNetworkID
* swarm/network: Bumped protocol version
* swarm/network: Changed LightNode handhsake test to table driven
* swarm/network: Changed back TestProtocolVersion to 5 for now
* swarm/network: Moved the test configuration inside the test function scope
* swarm/network/simulation: increase the sleep duration for TestRun
* cmd/swarm, swarm: fix failing tests on mac
* cmd/swarm: update TestCLISwarmFs skip comment
* swarm/network/simulation: adjust disconnections on simulation close
* swarm/network/simulation: call cleanups after net shutdown
* consensus/ethash: start remote ggoroutine to handle remote mining
* consensus/ethash: expose remote miner api
* consensus/ethash: expose submitHashrate api
* miner, ethash: push empty block to sealer without waiting execution
* consensus, internal: add getHashrate API for ethash
* consensus: add three method for consensus interface
* miner: expose consensus engine running status to miner
* eth, miner: specify etherbase when miner created
* miner: commit new work when consensus engine is started
* consensus, miner: fix some logics
* all: delete useless interfaces
* consensus: polish a bit
* rpc: Make HTTP server timeout values configurable
* rpc: Remove flags for setting HTTP Timeouts, configuring via .toml is sufficient.
* rpc: Replace separate constants with a single default struct.
* rpc: Update HTTP Server Read and Write Timeouts to 30s.
* rpc: Remove redundant NewDefaultHTTPTimeouts function.
* rpc: document HTTPTimeouts.
* rpc: sanitize timeout values for library use
* build: add support for different package and binary names
* build: bump up copyright date
* build: change default PackageName to empty string
* build, internal, swarm: enhance build/release process
* build: hack ethereum-swarm as a "depends" in deb package
* build/ci: remove redundant variables
* build, cmd, mobile, params, swarm: remove VERSION file; rename Version to VersionMeta;
* internal: remove VERSION() method which reads VERSION file
* build: fix VersionFilePath to Version
* Makefile: remove clean_go_build_cache.sh until it works
* Makefile: revert removal of clean_go_build_cache.sh
* swarm/storage/mru: Add embedded publickey and remove ENS dep
This commit breaks swarm, swarm/api...
but tests in swarm/storage/mru pass
* swarm: Refactor swarm, swarm/api to mru changes, make tests pass
* swarm/storage/mru: Remove self from recv, remove test ens vldtr
* swarm/storage/mru: Remove redundant test, expose ResourceHash mthd
* swarm/storage/mru: Make HeaderGetter mandatory + godoc fixes
* swarm/storage: Remove validator prefix for metadata chunk
* swarm/storage/mru: Use Address instead of PublicKey
* swarm/storage/mru: Change index from name to metadata chunk addr
* swarm/storage/mru: Refactor swarm/api/... to MRU index changes
* swarm/storage/mru: Refactor cleanup
* swarm/storage/mru: Rebase cleanup
* swarm: Use constructor for GenericSigner MRU in swarm.go
* swarm/storage: Change to BMTHash for MRU hashing
* swarm/storage: Reduce loglevel on chunk validator logs
* swarm/storage/mru: Delint
* swarm: MRU Rebase cleanup
* swarm/storage/mru: client-side mru signatures
Rebase to PR #668 and fix all conflicts
* swarm/storage/mru: refactor and documentation
* swarm/resource/mru: error-checking tests for parseUpdate/newUpdateChunk
* swarm/storage/mru: Added resourcemetadata tests
* swarm/storage/mru: Added tests for UpdateRequest
* swarm/storage/mru: more test coverage for UpdateRequest and comments
* swarm/storage/mru: Avoid fake chunks in parseUpdate()
* swarm/storage/mru: Documented resource.go extensively
moved some functions where they make most sense
* swarm/storage/mru: increase test coverage for UpdateRequest and
variable name changes throughout to increase consistency
* swarm/storage/mru: moved default timestamp to NewCreateRequest-
* swarm/storage/mru: lookup refactor
* swarm/storage/mru: added comments and renamed raw flag to rawmru
* swarm/storage/mru: fix receiver typo
* swarm/storage/mru: refactored update chunk new/create
* swarm/storage/mru: refactored signature digest to avoid malleability
* swarm/storage/mru: optimize update data serialization
* swarm/storage/mru: refactor and cleanup
* swarm/storage/mru: add timestamp struct and serialization
* swarm/storage/mru: fix lint error and mark some old code for deletion
* swarm/storage/mru: remove unnecessary variable
* swarm/storage/mru: Added more comments throughout
* swarm/storage/mru: Refactored metadata chunk layout + extensive error...
* swarm/storage/mru: refactor cli parser
Changed resource info output to JSON
* swarm/storage/mru: refactor serialization for extensibility
refactored error messages to NewErrorf
* swarm/storage/mru: Moved Signature to resource_sign.
Check Sign errors in server tests
* swarm/storage/mru: Remove isSafeName() checks
* swarm/storage/mru: scrubbed off all references to "block" for time
* swarm/storage/mru: removed superfluous isSynced() call.
* swarm/storage/mru: remove isMultihash() and ToSafeName functions
* swarm/storage/mru: various fixes and comments
* swarm/storage/mru: decoupled cli for independent create/update
* Made resource name optional
* Removed unused LookupPrevious
* swarm/storage/mru: Decoupled resource create / update & refactor
* swarm/storage/mru: Fixed some comments as per issues raised in PR #743
* swarm/storage/mru: Cosmetic changes as per #743 comments
* swarm/storage/mru: refct request encoder/decoder > marshal/unmarshal
* swarm/storage/mru: Cosmetic changes as per review in #748
* swarm/storage/mru: removed timestamp proof placeholder
* swarm/storage/mru: cosmetic/doc/fixes changes as per comments in #704
* swarm/storage/mru: removed unnecessary check in Handler.update
* swarm/storage/mru: Implemented Marshaler/Unmarshaler iface in Request
* swarm/storage/mru: Fixed linter error
* swarm/storage/mru: removed redundant address in signature digest
* swarm/storage/mru: fixed bug: LookupLatestVersionInPeriod not working
* swarm/storage/mru: Unfold Request creation API for create or update+create
set common time source for mru package
* swarm/api/http: fix HandleGetResource error variable shadowed
when requesting a resource that does not exist
* swarm/storage/mru: Add simple check to detect duplicate updates
* swarm/storage/mru: moved Multihash() to the right place.
* cmd/swarm: remove unneeded clientaccountmanager.go
* swarm/storage/mru: Changed some comments as per reviews in #784
* swarm/storage/mru: Made SignedResourceUpdate.GetDigest() public
* swarm/storage/mru: cosmetic changes as per comments in #784
* cmd/swarm: Inverted --multihash flag default
* swarm/storage/mru: removed Verify from SignedResourceUpdate.fromChunk
* swarm/storage/mru: Moved validation code out of serializer
Cosmetic / comment changes
* swarm/storage/mru: Added unit tests for UpdateLookup
* swarm/storage/mru: Increased coverage of metadata serialization
* swarm/storage/mru: Increased test coverage of updateHeader serializers
* swarm/storage/mru: Add resourceUpdate serializer test
* cmd/swarm: minor cli flag text adjustments
* swarm/api/http: sticky footer for swarm landing page using flex
* swarm/api/http: sticky footer for error pages and fix for multiple choices
* cmd/swarm, swarm/storage, swarm: fix mingw on windows test issues
* cmd/swarm: update description of swarm cmd
* swarm: added network ID test
* cmd/swarm: support for smoke tests on the production swarm cluster
* cmd/swarm/swarm-smoke: simplify cluster logic as per suggestion
* swarm: propagate ctx to internal apis (#754)
* swarm/metrics: collect disk measurements
* swarm/bmt: fix io.Writer interface
* Write now tolerates arbitrary variable buffers
* added variable buffer tests
* Write loop and finalise optimisation
* refactor / rename
* add tests for empty input
* swarm/pss: (UPDATE) Generic notifications package (#744)
swarm/pss: Generic package for creating pss notification svcs
* swarm: Adding context to more functions
* swarm/api: change colour of landing page in templates
* swarm/api: change landing page to react to enter keypress
Prior to this change, when geth was started with `geth -dev -rpc`,
it would report a network id of `1` in response to the `net_version` RPC
request. But the actual network id it used to verify transactions
was `1337`.
This change causes geth instead respond with `1337` to the `net_version`
RPC when geth is started with `geth -dev -rpc`.
ToECDSAPub was unsafe because it returned a non-nil key with nil X, Y in
case of invalid input. This change replaces ToECDSAPub with
UnmarshalPubkey across the codebase.
Allow the --abi flag to be given - to indicate that it should read the
ABI information from standard input. It expects to read the solc output
with the --combined-json flag providing bin, abi, userdoc, devdoc, and
metadata, and works very similarly to the internal invocation of solc,
except it allows external invocation of solc.
This facilitates integration with more complex solc invocations, such
as invocations that require path remapping or --allow-paths tweaks.
Simple usage example:
solc --combined-json bin,abi,userdoc,devdoc,metadata *.sol | abigen --abi -
* whisper/mailserver: pass init error to the caller
* whisper/mailserver: add returns to fmt.Errorf
* whisper/mailserver: check err in mailserver init test
* common: delete StringToAddress, StringToHash
These functions are confusing because they don't parse hex, but use the
bytes of the string. This change removes them, replacing all uses of
StringToAddress(s) by BytesToAddress([]byte(s)).
* eth/filters: remove incorrect use of common.BytesToAddress
The diagnostic tool was saving the unencrypted version of the messages, which is an obvious
security flaw. As of this commit:
* encrypted messages saved instead of plain text.
* all messages are stored, even that created by the user of wnode.
This is in preparation for the switch to libp2p: the ID generated
will be from a private key created with the help of libp2p's crypto
library, while Whisper will still use Go's default crypto libraries
for encrypting its messages. This change removes a conflict.
It shouldn't have any impact as the person receiving emails is
the user, not the node.
* cmd,node,rpc: add allowedHosts to prevent dns rebinding attacks
* p2p,node: Fix bug with dumpconfig introduced in r54aeb8e4c0bb9f0e7a6c67258af67df3b266af3d
* rpc: add wildcard support for rpcallowedhosts + go fmt
* cmd/geth, cmd/utils, node, rpc: ignore direct ip(v4/6) addresses in rpc virtual hostnames check
* http, rpc, utils: make vhosts into map, address review concerns
* node: change log messages to use geth standard (not sprintf)
* rpc: fix spelling
* p2p: add DialRatio for configuration of inbound vs. dialed connections
* p2p: add connection flags to PeerInfo
* p2p/netutil: add SameNet, DistinctNetSet
* p2p/discover: improve revalidation and seeding
This changes node revalidation to be periodic instead of on-demand. This
should prevent issues where dead nodes get stuck in closer buckets
because no other node will ever come along to replace them.
Every 5 seconds (on average), the last node in a random bucket is
checked and moved to the front of the bucket if it is still responding.
If revalidation fails, the last node is replaced by an entry of the
'replacement list' containing recently-seen nodes.
Most close buckets are removed because it's very unlikely we'll ever
encounter a node that would fall into any of those buckets.
Table seeding is also improved: we now require a few minutes of table
membership before considering a node as a potential seed node. This
should make it less likely to store short-lived nodes as potential
seeds.
* p2p/discover: fix nits in UDP transport
We would skip sending neighbors replies if there were fewer than
maxNeighbors results and CheckRelayIP returned an error for the last
one. While here, also resolve a TODO about pong reply tokens.
The bulk of the issue was to adapt to the new requirement
that a v6 filter has to either contain a symmertric key or
an asymmetric one.
This commits revert one of the fixes that I made to remove
a linter warning: unexporting NewSentMessage. This is not
really a problem as I have a cleanup in the pipe that will
solve this issue.
* whisper: fixes warnings from the code linter
* whisper: more non-API-breaking changes
The remaining lint errors are because of auto-generated
files and one is because an exported function has a non-
exported return type. Changing this would break the API,
and will be part of another commit for easier reversal.
* whisper: un-export NewSentMessage to please the linter
This is an API change, which is why it's in its own commit.
This change was initiated after the linter complained that
the returned type wasn't exported. I chose to un-export
the function instead of exporting the type, because that
type is an implementation detail that I would like to
change in the near future to make the code more
readable and with an increased coverage.
* whisper: update gencodec output after upgrading it to new lint standards
This commit affects p2p/discv5 "topic discovery" by running it on
the same UDP port where the old discovery works. This is realized
by giving an "unhandled" packet channel to the old v4 discovery
packet handler where all invalid packets are sent. These packets
are then processed by v5. v5 packets are always invalid when
interpreted by v4 and vice versa. This is ensured by adding one
to the first byte of the packet hash in v5 packets.
DiscoveryV5Bootnodes is also changed to point to new bootnodes
that are implementing the changed packet format with modified
hash. Existing and new v5 bootnodes are both running on different
ports ATM.
This commit:
- Adds a --msgfile option to read the message to sign from a file
instead of command line argument.
- Adds a unit test for signing subcommands.
- Removes some weird whitespace in the code.
* dashboard: footer, deep state update
* dashboard: resolve asset path
* dashboard: remove bundle.js
* dashboard: prevent state update on every reconnection
* dashboard: fix linter issue
* dashboard, cmd: minor UI fix, include commit hash
* remove geth binary
* dashboard: gitCommit renamed to commit
* dashboard: move the geth version to the right, make commit optional
* dashboard: commit limited to 7 characters
* dashboard: limit commit length on client side
* dashboard: run go generate
* common/fdlimit: Move fdlimit files to separate package
When go-ethereum is used as a library the calling program need to set
the FD limit.
This commit extract fdlimit files to a separate package so it can be
used outside of go-ethereum.
* common/fdlimit: Remove FdLimit from functions signature
* common/fdlimit: Rename fdlimit functions
* core/types, core/vm, eth, tests: regenerate gencodec files
* Makefile: update devtools target
Install protoc-gen-go and print reminders about npm, solc and protoc.
Also switch to github.com/kevinburke/go-bindata because it's more
maintained.
* contracts/ens: update contracts and regenerate with solidity v0.4.19
The newer upstream version of the FIFSRegistrar contract doesn't set the
resolver anymore. The resolver is now deployed separately.
* contracts/release: regenerate with solidity v0.4.19
* contracts/chequebook: fix fallback and regenerate with solidity v0.4.19
The contract didn't have a fallback function, payments would be rejected
when compiled with newer solidity. References to 'mortal' and 'owned'
use the local file system so we can compile without network access.
* p2p/discv5: regenerate with recent stringer
* cmd/faucet: regenerate
* dashboard: regenerate
* eth/tracers: regenerate
* internal/jsre/deps: regenerate
* dashboard: avoid sed -i because it's not portable
* accounts/usbwallet/internal/trezor: fix go generate warnings
* cmd/utils: Add check on hard limit, skip test if below target
* cmd/utils: Cross platform compatible fd limit test
* cmd/utils: Remove syscall.Rlimit in test
* cmd/utils: comment fd utility method
ethkey is a new tool that serves as a command line interface to
the basic key management functionalities of geth. It currently
supports:
- generating keyfiles
- inspecting keyfiles (print public and private key)
- signing messages
- verifying signed messages
Specifying ENS API CLI flag, env variable or configuration
field is required for ENS resolving. Backward compatibility is
preserved with --ens-api="" CLI flag value.
Merge with changes that implement config file PR #15548.
Field *EnsApi string* in swarm/api.Config is replaced with
*EnsAPIs []string*.
A new field *EnsDisabled bool* is added to swarm/api.Config for
easy way to disable ENS resolving with config file.
Signature of function swarm.NewSwarm is changed and simplified.
This commit adds a TOML configuration option to swarm. It reuses
the TOML configuration structure used in geth with swarm
customized items.
The commit:
* Adds a "dumpconfig" command to the swarm executable which
allows printing the (default) configuration to stdout, which
then can be redirected to a file in order to customize it.
* Adds a "--config <file>" option to the swarm executable which will
allow to load a configuration file in TOML format from the
specified location in order to initialize the Swarm node The
override priorities are like follows: environment variables
override command line arguments override config file override
default config.
Allow multiple --ens-api flags to be specified with value format
[tld:][contract-addr@]url.
Backward compatibility with only one --ens-api flag and --ens-addr
flag is preserved and conflict cases are handled:
- multiple --ens-api with --ens-addr returns an error
- single --ens-api with contract address and --ens-addr with
different contract address returns an error
Previously implemented --ens-endpoint is removed. Its functionality
is replaced with multiple --ens-api flags.
* cmd, consensus, eth: split ethash related config to it own
* eth, consensus: minor polish
* eth, consenus, console: compress pow testing config field to single one
* consensus, eth: document pow mode
