This enables the following linters
- typecheck
- unused
- staticcheck
- bidichk
- durationcheck
- exportloopref
- gosec
WIth a few exceptions.
- We use a deprecated protobuf in trezor. I didn't want to mess with that, since I cannot meaningfully test any changes there.
- The deprecated TypeMux is used in a few places still, so the warning for it is silenced for now.
- Using string type in context.WithValue is apparently wrong, one should use a custom type, to prevent collisions between different places in the hierarchy of callers. That should be fixed at some point, but may require some attention.
- The warnings for using weak random generator are squashed, since we use a lot of random without need for cryptographic guarantees.
This change makes use of the new code generator rlp/rlpgen to improve the
performance of RLP encoding for Header and StateAccount. It also speeds up
encoding of ReceiptForStorage using the new rlp.EncoderBuffer API.
The change is much less transparent than I wanted it to be, because Header and
StateAccount now have an EncodeRLP method defined with pointer receiver. It
used to be possible to encode non-pointer values of these types, but the new
method prevents that and attempting to encode unadressable values (even if
part of another value) will return an error. The error can be surprising and may
pop up in places that previously didn't expect any errors.
To make things work, I also needed to update all code paths (mostly in unit tests)
that lead to encoding of non-pointer values, and pass a pointer instead.
Benchmark results:
name old time/op new time/op delta
EncodeRLP/legacy-header-8 328ns ± 0% 237ns ± 1% -27.63% (p=0.000 n=8+8)
EncodeRLP/london-header-8 353ns ± 0% 247ns ± 1% -30.06% (p=0.000 n=8+8)
EncodeRLP/receipt-for-storage-8 237ns ± 0% 123ns ± 0% -47.86% (p=0.000 n=8+7)
EncodeRLP/receipt-full-8 297ns ± 0% 301ns ± 1% +1.39% (p=0.000 n=8+8)
name old speed new speed delta
EncodeRLP/legacy-header-8 1.66GB/s ± 0% 2.29GB/s ± 1% +38.19% (p=0.000 n=8+8)
EncodeRLP/london-header-8 1.55GB/s ± 0% 2.22GB/s ± 1% +42.99% (p=0.000 n=8+8)
EncodeRLP/receipt-for-storage-8 38.0MB/s ± 0% 64.8MB/s ± 0% +70.48% (p=0.000 n=8+7)
EncodeRLP/receipt-full-8 910MB/s ± 0% 897MB/s ± 1% -1.37% (p=0.000 n=8+8)
name old alloc/op new alloc/op delta
EncodeRLP/legacy-header-8 0.00B 0.00B ~ (all equal)
EncodeRLP/london-header-8 0.00B 0.00B ~ (all equal)
EncodeRLP/receipt-for-storage-8 64.0B ± 0% 0.0B -100.00% (p=0.000 n=8+8)
EncodeRLP/receipt-full-8 320B ± 0% 320B ± 0% ~ (all equal)
* les: move serverPool to les/vflux/client
* les: add metrics
* les: moved ValueTracker inside ServerPool
* les: protect against node registration before server pool is started
* les/vflux/client: fixed tests
* les: make peer registration safe
Transaction unindexing will be enabled by default as of 1.10, which causes tx status retrieval will be broken without this PR.
This PR introduces a retry mechanism in TxStatus retrieval.
* les: refactored server handler
* tests/fuzzers/les: add fuzzer for les server handler
* tests, les: update les fuzzer
tests: update les fuzzer
tests/fuzzer/les: release resources
tests/fuzzer/les: pre-initialize all resources
* les: refactored server handler and fuzzer
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
* les: allow tx unindexing in les/4 light server mode
* les: minor fixes
* les: more small fixes
* les: add meaningful constants for recentTxIndex handshake field
This commit splits the eth package, separating the handling of eth and snap protocols. It also includes the capability to run snap sync (https://github.com/ethereum/devp2p/blob/master/caps/snap.md) , but does not enable it by default.
Co-authored-by: Marius van der Wijden <m.vanderwijden@live.de>
Co-authored-by: Martin Holst Swende <martin@swende.se>
This PR reimplements the light client server pool. It is also a first step
to move certain logic into a new lespay package. This package will contain
the implementation of the lespay token sale functions, the token buying and
selling logic and other components related to peer selection/prioritization
and service quality evaluation. Over the long term this package will be
reusable for incentivizing future protocols.
Since the LES peer logic is now based on enode.Iterator, it can now use
DNS-based fallback discovery to find servers.
This document describes the function of the new components:
https://gist.github.com/zsfelfoldi/3c7ace895234b7b345ab4f71dab102d4
This PR adds service value measurement statistics to the light client. It
also adds a private API that makes these statistics accessible. A follow-up
PR will add the new server pool which uses these statistics to select
servers with good performance.
This document describes the function of the new components:
https://gist.github.com/zsfelfoldi/3c7ace895234b7b345ab4f71dab102d4
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
Co-authored-by: rjl493456442 <garyrong0905@gmail.com>
* les: move execqueue into utilities package
execqueue is a util for executing queued functions
in a serial order which is used by both les server
and les client. Move it to common package.
* les: move randselect to utilities package
weighted_random_selector is a helpful tool for randomly select
items maintained in a set but based on the item weight.
It's used anywhere is LES package, mainly by les client but will
be used in les server with very high chance. So move it into a
common package as the second step for les separation.
* les: rename to utils
* les: move the checkpoint oracle into its own package
It's first step of refactor LES package. LES package
basically can be divided into LES client and LES server.
However both sides will use checkpoint package for
status retrieval and verification. So this PR moves
checkpoint oracle into a separate package
* les: address comments
* les: reject client connection if it makes too much invalid req
* les: address comments
* les: use uint32
* les: fix variable name
* les: add invalid counter for duplicate invalid req
This change
- implements concurrent LES request serving even for a single peer.
- replaces the request cost estimation method with a cost table based on
benchmarks which gives much more consistent results. Until now the
allowed number of light peers was just a guess which probably contributed
a lot to the fluctuating quality of available service. Everything related
to request cost is implemented in a single object, the 'cost tracker'. It
uses a fixed cost table with a global 'correction factor'. Benchmark code
is included and can be run at any time to adapt costs to low-level
implementation changes.
- reimplements flowcontrol.ClientManager in a cleaner and more efficient
way, with added capabilities: There is now control over bandwidth, which
allows using the flow control parameters for client prioritization.
Target utilization over 100 percent is now supported to model concurrent
request processing. Total serving bandwidth is reduced during block
processing to prevent database contention.
- implements an RPC API for the LES servers allowing server operators to
assign priority bandwidth to certain clients and change prioritized
status even while the client is connected. The new API is meant for
cases where server operators charge for LES using an off-protocol mechanism.
- adds a unit test for the new client manager.
- adds an end-to-end test using the network simulator that tests bandwidth
control functions through the new API.
Package p2p/enode provides a generalized representation of p2p nodes
which can contain arbitrary information in key/value pairs. It is also
the new home for the node database. The "v4" identity scheme is also
moved here from p2p/enr to remove the dependency on Ethereum crypto from
that package.
Record signature handling is changed significantly. The identity scheme
registry is removed and acceptable schemes must be passed to any method
that needs identity. This means records must now be validated explicitly
after decoding.
The enode API is designed to make signature handling easy and safe: most
APIs around the codebase work with enode.Node, which is a wrapper around
a valid record. Going from enr.Record to enode.Node requires a valid
signature.
* p2p/discover: port to p2p/enode
This ports the discovery code to the new node representation in
p2p/enode. The wire protocol is unchanged, this can be considered a
refactoring change. The Kademlia table can now deal with nodes using an
arbitrary identity scheme. This requires a few incompatible API changes:
- Table.Lookup is not available anymore. It used to take a public key
as argument because v4 protocol requires one. Its replacement is
LookupRandom.
- Table.Resolve takes *enode.Node instead of NodeID. This is also for
v4 protocol compatibility because nodes cannot be looked up by ID
alone.
- Types Node and NodeID are gone. Further commits in the series will be
fixes all over the the codebase to deal with those removals.
* p2p: port to p2p/enode and discovery changes
This adapts package p2p to the changes in p2p/discover. All uses of
discover.Node and discover.NodeID are replaced by their equivalents from
p2p/enode.
New API is added to retrieve the enode.Node instance of a peer. The
behavior of Server.Self with discovery disabled is improved. It now
tries much harder to report a working IP address, falling back to
127.0.0.1 if no suitable address can be determined through other means.
These changes were needed for tests of other packages later in the
series.
* p2p/simulations, p2p/testing: port to p2p/enode
No surprises here, mostly replacements of discover.Node, discover.NodeID
with their new equivalents. The 'interesting' API changes are:
- testing.ProtocolSession tracks complete nodes, not just their IDs.
- adapters.NodeConfig has a new method to create a complete node.
These changes were needed to make swarm tests work.
Note that the NodeID change makes the code incompatible with old
simulation snapshots.
* whisper/whisperv5, whisper/whisperv6: port to p2p/enode
This port was easy because whisper uses []byte for node IDs and
URL strings in the API.
* eth: port to p2p/enode
Again, easy to port because eth uses strings for node IDs and doesn't
care about node information in any way.
* les: port to p2p/enode
Apart from replacing discover.NodeID with enode.ID, most changes are in
the server pool code. It now deals with complete nodes instead
of (Pubkey, IP, Port) triples. The database format is unchanged for now,
but we should probably change it to use the node database later.
* node: port to p2p/enode
This change simply replaces discover.Node and discover.NodeID with their
new equivalents.
* swarm/network: port to p2p/enode
Swarm has its own node address representation, BzzAddr, containing both
an overlay address (the hash of a secp256k1 public key) and an underlay
address (enode:// URL).
There are no changes to the BzzAddr format in this commit, but certain
operations such as creating a BzzAddr from a node ID are now impossible
because node IDs aren't public keys anymore.
Most swarm-related changes in the series remove uses of
NewAddrFromNodeID, replacing it with NewAddr which takes a complete node
as argument. ToOverlayAddr is removed because we can just use the node
ID directly.
* les, light: fix CHT trie retrievals
* les, light: minor polishes, test remote CHT retrievals
* les, light: deterministic nodeset rlp, bloombits test skeleton
* les: add an event emission to the les bloombits test
* les: drop dead tester code
This PR implements the new LES protocol version extensions:
* new and more efficient Merkle proofs reply format (when replying to
a multiple Merkle proofs request, we just send a single set of trie
nodes containing all necessary nodes)
* BBT (BloomBitsTrie) works similarly to the existing CHT and contains
the bloombits search data to speed up log searches
* GetTxStatusMsg returns the inclusion position or the
pending/queued/unknown state of a transaction referenced by hash
* an optional signature of new block data (number/hash/td) can be
included in AnnounceMsg to provide an option for "very light
clients" (mobile/embedded devices) to skip expensive Ethash check
and accept multiple signatures of somewhat trusted servers (still a
lot better than trusting a single server completely and retrieving
everything through RPC). The new client mode is not implemented in
this PR, just the protocol extension.
