plugeth/swarm/network/stream/delivery_test.go

796 lines
21 KiB
Go
Raw Normal View History

2018-06-20 12:06:27 +00:00
// Copyright 2018 The go-ethereum Authors
// This file is part of the go-ethereum library.
//
// The go-ethereum library is free software: you can redistribute it and/or modify
// it under the terms of the GNU Lesser General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// The go-ethereum library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
package stream
import (
"bytes"
"context"
"errors"
2018-06-20 12:06:27 +00:00
"fmt"
"os"
2018-06-20 12:06:27 +00:00
"sync"
"sync/atomic"
2018-06-20 12:06:27 +00:00
"testing"
"time"
"github.com/ethereum/go-ethereum/node"
"github.com/ethereum/go-ethereum/p2p"
"github.com/ethereum/go-ethereum/p2p/enode"
"github.com/ethereum/go-ethereum/p2p/protocols"
"github.com/ethereum/go-ethereum/p2p/simulations/adapters"
2018-06-20 12:06:27 +00:00
p2ptest "github.com/ethereum/go-ethereum/p2p/testing"
"github.com/ethereum/go-ethereum/swarm/log"
"github.com/ethereum/go-ethereum/swarm/network"
pq "github.com/ethereum/go-ethereum/swarm/network/priorityqueue"
"github.com/ethereum/go-ethereum/swarm/network/simulation"
"github.com/ethereum/go-ethereum/swarm/state"
2018-06-20 12:06:27 +00:00
"github.com/ethereum/go-ethereum/swarm/storage"
"github.com/ethereum/go-ethereum/swarm/testutil"
2018-06-20 12:06:27 +00:00
)
//Tests initializing a retrieve request
2018-06-20 12:06:27 +00:00
func TestStreamerRetrieveRequest(t *testing.T) {
regOpts := &RegistryOptions{
Retrieval: RetrievalClientOnly,
Syncing: SyncingDisabled,
}
tester, streamer, _, teardown, err := newStreamerTester(regOpts)
2018-06-20 12:06:27 +00:00
defer teardown()
if err != nil {
t.Fatal(err)
}
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-24 22:59:00 +00:00
node := tester.Nodes[0]
2018-06-20 12:06:27 +00:00
ctx := context.Background()
req := network.NewRequest(
storage.Address(hash0[:]),
true,
&sync.Map{},
)
streamer.delivery.RequestFromPeers(ctx, req)
2018-06-20 12:06:27 +00:00
stream := NewStream(swarmChunkServerStreamName, "", true)
2018-06-20 12:06:27 +00:00
err = tester.TestExchanges(p2ptest.Exchange{
Label: "RetrieveRequestMsg",
Expects: []p2ptest.Expect{
{ //start expecting a subscription for RETRIEVE_REQUEST due to `RetrievalClientOnly`
Code: 4,
Msg: &SubscribeMsg{
Stream: stream,
History: nil,
Priority: Top,
},
Peer: node.ID(),
},
{ //expect a retrieve request message for the given hash
2018-06-20 12:06:27 +00:00
Code: 5,
Msg: &RetrieveRequestMsg{
Addr: hash0[:],
SkipCheck: true,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-24 22:59:00 +00:00
Peer: node.ID(),
2018-06-20 12:06:27 +00:00
},
},
})
if err != nil {
t.Fatalf("Expected no error, got %v", err)
}
}
//Test requesting a chunk from a peer then issuing a "empty" OfferedHashesMsg (no hashes available yet)
//Should time out as the peer does not have the chunk (no syncing happened previously)
2018-06-20 12:06:27 +00:00
func TestStreamerUpstreamRetrieveRequestMsgExchangeWithoutStore(t *testing.T) {
tester, streamer, _, teardown, err := newStreamerTester(&RegistryOptions{
Retrieval: RetrievalEnabled,
Syncing: SyncingDisabled, //do no syncing
})
2018-06-20 12:06:27 +00:00
defer teardown()
if err != nil {
t.Fatal(err)
}
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-24 22:59:00 +00:00
node := tester.Nodes[0]
2018-06-20 12:06:27 +00:00
chunk := storage.NewChunk(storage.Address(hash0[:]), nil)
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-24 22:59:00 +00:00
peer := streamer.getPeer(node.ID())
2018-06-20 12:06:27 +00:00
stream := NewStream(swarmChunkServerStreamName, "", true)
//simulate pre-subscription to RETRIEVE_REQUEST stream on peer
peer.handleSubscribeMsg(context.TODO(), &SubscribeMsg{
Stream: stream,
2018-06-20 12:06:27 +00:00
History: nil,
Priority: Top,
})
//test the exchange
2018-06-20 12:06:27 +00:00
err = tester.TestExchanges(p2ptest.Exchange{
Expects: []p2ptest.Expect{
{ //first expect a subscription to the RETRIEVE_REQUEST stream
Code: 4,
Msg: &SubscribeMsg{
Stream: stream,
History: nil,
Priority: Top,
},
Peer: node.ID(),
},
},
}, p2ptest.Exchange{
2018-06-20 12:06:27 +00:00
Label: "RetrieveRequestMsg",
Triggers: []p2ptest.Trigger{
{ //then the actual RETRIEVE_REQUEST....
2018-06-20 12:06:27 +00:00
Code: 5,
Msg: &RetrieveRequestMsg{
Addr: chunk.Address()[:],
2018-06-20 12:06:27 +00:00
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-24 22:59:00 +00:00
Peer: node.ID(),
2018-06-20 12:06:27 +00:00
},
},
Expects: []p2ptest.Expect{
{ //to which the peer responds with offered hashes
2018-06-20 12:06:27 +00:00
Code: 1,
Msg: &OfferedHashesMsg{
HandoverProof: nil,
Hashes: nil,
From: 0,
To: 0,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-24 22:59:00 +00:00
Peer: node.ID(),
2018-06-20 12:06:27 +00:00
},
},
})
//should fail with a timeout as the peer we are requesting
//the chunk from does not have the chunk
expectedError := `exchange #1 "RetrieveRequestMsg": timed out`
2018-06-20 12:06:27 +00:00
if err == nil || err.Error() != expectedError {
t.Fatalf("Expected error %v, got %v", expectedError, err)
}
}
// upstream request server receives a retrieve Request and responds with
// offered hashes or delivery if skipHash is set to true
func TestStreamerUpstreamRetrieveRequestMsgExchange(t *testing.T) {
tester, streamer, localStore, teardown, err := newStreamerTester(&RegistryOptions{
Retrieval: RetrievalEnabled,
Syncing: SyncingDisabled,
})
2018-06-20 12:06:27 +00:00
defer teardown()
if err != nil {
t.Fatal(err)
}
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-24 22:59:00 +00:00
node := tester.Nodes[0]
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-24 22:59:00 +00:00
peer := streamer.getPeer(node.ID())
2018-06-20 12:06:27 +00:00
stream := NewStream(swarmChunkServerStreamName, "", true)
2018-06-20 12:06:27 +00:00
peer.handleSubscribeMsg(context.TODO(), &SubscribeMsg{
2018-06-20 12:06:27 +00:00
Stream: stream,
History: nil,
Priority: Top,
})
hash := storage.Address(hash0[:])
chunk := storage.NewChunk(hash, hash)
err = localStore.Put(context.TODO(), chunk)
if err != nil {
t.Fatalf("Expected no err got %v", err)
}
2018-06-20 12:06:27 +00:00
err = tester.TestExchanges(p2ptest.Exchange{
Expects: []p2ptest.Expect{
{
Code: 4,
Msg: &SubscribeMsg{
Stream: stream,
History: nil,
Priority: Top,
},
Peer: node.ID(),
},
},
}, p2ptest.Exchange{
2018-06-20 12:06:27 +00:00
Label: "RetrieveRequestMsg",
Triggers: []p2ptest.Trigger{
{
Code: 5,
Msg: &RetrieveRequestMsg{
Addr: hash,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-24 22:59:00 +00:00
Peer: node.ID(),
2018-06-20 12:06:27 +00:00
},
},
Expects: []p2ptest.Expect{
{
Code: 1,
Msg: &OfferedHashesMsg{
HandoverProof: &HandoverProof{
Handover: &Handover{},
},
Hashes: hash,
From: 0,
// TODO: why is this 32???
To: 32,
Stream: stream,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-24 22:59:00 +00:00
Peer: node.ID(),
2018-06-20 12:06:27 +00:00
},
},
})
if err != nil {
t.Fatal(err)
}
hash = storage.Address(hash1[:])
chunk = storage.NewChunk(hash, hash1[:])
err = localStore.Put(context.TODO(), chunk)
if err != nil {
t.Fatalf("Expected no err got %v", err)
}
2018-06-20 12:06:27 +00:00
err = tester.TestExchanges(p2ptest.Exchange{
Label: "RetrieveRequestMsg",
Triggers: []p2ptest.Trigger{
{
Code: 5,
Msg: &RetrieveRequestMsg{
Addr: hash,
SkipCheck: true,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-24 22:59:00 +00:00
Peer: node.ID(),
2018-06-20 12:06:27 +00:00
},
},
Expects: []p2ptest.Expect{
{
Code: 6,
Msg: &ChunkDeliveryMsg{
Addr: hash,
SData: hash,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-24 22:59:00 +00:00
Peer: node.ID(),
2018-06-20 12:06:27 +00:00
},
},
})
if err != nil {
t.Fatal(err)
}
}
// if there is one peer in the Kademlia, RequestFromPeers should return it
func TestRequestFromPeers(t *testing.T) {
dummyPeerID := enode.HexID("3431c3939e1ee2a6345e976a8234f9870152d64879f30bc272a074f6859e75e8")
addr := network.RandomAddr()
to := network.NewKademlia(addr.OAddr, network.NewKadParams())
delivery := NewDelivery(to, nil)
protocolsPeer := protocols.NewPeer(p2p.NewPeer(dummyPeerID, "dummy", nil), nil, nil)
peer := network.NewPeer(&network.BzzPeer{
BzzAddr: network.RandomAddr(),
LightNode: false,
Peer: protocolsPeer,
}, to)
to.On(peer)
r := NewRegistry(addr.ID(), delivery, nil, nil, nil, nil)
// an empty priorityQueue has to be created to prevent a goroutine being called after the test has finished
sp := &Peer{
Peer: protocolsPeer,
pq: pq.New(int(PriorityQueue), PriorityQueueCap),
streamer: r,
}
r.setPeer(sp)
req := network.NewRequest(
storage.Address(hash0[:]),
true,
&sync.Map{},
)
ctx := context.Background()
id, _, err := delivery.RequestFromPeers(ctx, req)
if err != nil {
t.Fatal(err)
}
if *id != dummyPeerID {
t.Fatalf("Expected an id, got %v", id)
}
}
// RequestFromPeers should not return light nodes
func TestRequestFromPeersWithLightNode(t *testing.T) {
dummyPeerID := enode.HexID("3431c3939e1ee2a6345e976a8234f9870152d64879f30bc272a074f6859e75e8")
addr := network.RandomAddr()
to := network.NewKademlia(addr.OAddr, network.NewKadParams())
delivery := NewDelivery(to, nil)
protocolsPeer := protocols.NewPeer(p2p.NewPeer(dummyPeerID, "dummy", nil), nil, nil)
// setting up a lightnode
peer := network.NewPeer(&network.BzzPeer{
BzzAddr: network.RandomAddr(),
LightNode: true,
Peer: protocolsPeer,
}, to)
to.On(peer)
r := NewRegistry(addr.ID(), delivery, nil, nil, nil, nil)
// an empty priorityQueue has to be created to prevent a goroutine being called after the test has finished
sp := &Peer{
Peer: protocolsPeer,
pq: pq.New(int(PriorityQueue), PriorityQueueCap),
streamer: r,
}
r.setPeer(sp)
req := network.NewRequest(
storage.Address(hash0[:]),
true,
&sync.Map{},
)
ctx := context.Background()
// making a request which should return with "no peer found"
_, _, err := delivery.RequestFromPeers(ctx, req)
expectedError := "no peer found"
if err.Error() != expectedError {
t.Fatalf("expected '%v', got %v", expectedError, err)
}
}
2018-06-20 12:06:27 +00:00
func TestStreamerDownstreamChunkDeliveryMsgExchange(t *testing.T) {
tester, streamer, localStore, teardown, err := newStreamerTester(&RegistryOptions{
Retrieval: RetrievalDisabled,
Syncing: SyncingDisabled,
})
2018-06-20 12:06:27 +00:00
defer teardown()
if err != nil {
t.Fatal(err)
}
streamer.RegisterClientFunc("foo", func(p *Peer, t string, live bool) (Client, error) {
return &testClient{
t: t,
}, nil
})
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-24 22:59:00 +00:00
node := tester.Nodes[0]
2018-06-20 12:06:27 +00:00
//subscribe to custom stream
2018-06-20 12:06:27 +00:00
stream := NewStream("foo", "", true)
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-24 22:59:00 +00:00
err = streamer.Subscribe(node.ID(), stream, NewRange(5, 8), Top)
2018-06-20 12:06:27 +00:00
if err != nil {
t.Fatalf("Expected no error, got %v", err)
}
chunkKey := hash0[:]
chunkData := hash1[:]
err = tester.TestExchanges(p2ptest.Exchange{
Label: "Subscribe message",
Expects: []p2ptest.Expect{
{ //first expect subscription to the custom stream...
2018-06-20 12:06:27 +00:00
Code: 4,
Msg: &SubscribeMsg{
Stream: stream,
History: NewRange(5, 8),
Priority: Top,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-24 22:59:00 +00:00
Peer: node.ID(),
2018-06-20 12:06:27 +00:00
},
},
},
p2ptest.Exchange{
Label: "ChunkDelivery message",
2018-06-20 12:06:27 +00:00
Triggers: []p2ptest.Trigger{
{ //...then trigger a chunk delivery for the given chunk from peer in order for
//local node to get the chunk delivered
2018-06-20 12:06:27 +00:00
Code: 6,
Msg: &ChunkDeliveryMsg{
Addr: chunkKey,
SData: chunkData,
},
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-24 22:59:00 +00:00
Peer: node.ID(),
2018-06-20 12:06:27 +00:00
},
},
})
if err != nil {
t.Fatalf("Expected no error, got %v", err)
}
ctx, cancel := context.WithTimeout(context.Background(), 2*time.Second)
defer cancel()
// wait for the chunk to get stored
storedChunk, err := localStore.Get(ctx, chunkKey)
for err != nil {
select {
case <-ctx.Done():
t.Fatalf("Chunk is not in localstore after timeout, err: %v", err)
default:
}
storedChunk, err = localStore.Get(ctx, chunkKey)
time.Sleep(50 * time.Millisecond)
2018-06-20 12:06:27 +00:00
}
if err != nil {
t.Fatalf("Expected no error, got %v", err)
}
if !bytes.Equal(storedChunk.Data(), chunkData) {
2018-06-20 12:06:27 +00:00
t.Fatal("Retrieved chunk has different data than original")
}
}
func TestDeliveryFromNodes(t *testing.T) {
testDeliveryFromNodes(t, 2, dataChunkCount, true)
testDeliveryFromNodes(t, 2, dataChunkCount, false)
testDeliveryFromNodes(t, 4, dataChunkCount, true)
testDeliveryFromNodes(t, 4, dataChunkCount, false)
testDeliveryFromNodes(t, 8, dataChunkCount, true)
testDeliveryFromNodes(t, 8, dataChunkCount, false)
testDeliveryFromNodes(t, 16, dataChunkCount, true)
testDeliveryFromNodes(t, 16, dataChunkCount, false)
2018-06-20 12:06:27 +00:00
}
func testDeliveryFromNodes(t *testing.T, nodes, chunkCount int, skipCheck bool) {
sim := simulation.New(map[string]simulation.ServiceFunc{
"streamer": func(ctx *adapters.ServiceContext, bucket *sync.Map) (s node.Service, cleanup func(), err error) {
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-24 22:59:00 +00:00
node := ctx.Config.Node()
addr := network.NewAddr(node)
store, datadir, err := createTestLocalStorageForID(node.ID(), addr)
if err != nil {
return nil, nil, err
}
bucket.Store(bucketKeyStore, store)
cleanup = func() {
os.RemoveAll(datadir)
store.Close()
}
localStore := store.(*storage.LocalStore)
netStore, err := storage.NewNetStore(localStore, nil)
if err != nil {
return nil, nil, err
}
kad := network.NewKademlia(addr.Over(), network.NewKadParams())
delivery := NewDelivery(kad, netStore)
netStore.NewNetFetcherFunc = network.NewFetcherFactory(delivery.RequestFromPeers, true).New
2018-06-20 12:06:27 +00:00
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-24 22:59:00 +00:00
r := NewRegistry(addr.ID(), delivery, netStore, state.NewInmemoryStore(), &RegistryOptions{
SkipCheck: skipCheck,
Syncing: SyncingDisabled,
Retrieval: RetrievalEnabled,
}, nil)
bucket.Store(bucketKeyRegistry, r)
fileStore := storage.NewFileStore(netStore, storage.NewFileStoreParams())
bucket.Store(bucketKeyFileStore, fileStore)
return r, cleanup, nil
},
})
defer sim.Close()
log.Info("Adding nodes to simulation")
_, err := sim.AddNodesAndConnectChain(nodes)
2018-06-20 12:06:27 +00:00
if err != nil {
t.Fatal(err)
2018-06-20 12:06:27 +00:00
}
log.Info("Starting simulation")
ctx := context.Background()
result := sim.Run(ctx, func(ctx context.Context, sim *simulation.Simulation) (err error) {
nodeIDs := sim.UpNodeIDs()
//determine the pivot node to be the first node of the simulation
pivot := nodeIDs[0]
//distribute chunks of a random file into Stores of nodes 1 to nodes
//we will do this by creating a file store with an underlying round-robin store:
//the file store will create a hash for the uploaded file, but every chunk will be
//distributed to different nodes via round-robin scheduling
log.Debug("Writing file to round-robin file store")
//to do this, we create an array for chunkstores (length minus one, the pivot node)
stores := make([]storage.ChunkStore, len(nodeIDs)-1)
//we then need to get all stores from the sim....
lStores := sim.NodesItems(bucketKeyStore)
2018-06-20 12:06:27 +00:00
i := 0
//...iterate the buckets...
for id, bucketVal := range lStores {
//...and remove the one which is the pivot node
if id == pivot {
continue
2018-06-20 12:06:27 +00:00
}
//the other ones are added to the array...
stores[i] = bucketVal.(storage.ChunkStore)
2018-06-20 12:06:27 +00:00
i++
}
//...which then gets passed to the round-robin file store
roundRobinFileStore := storage.NewFileStore(newRoundRobinStore(stores...), storage.NewFileStoreParams())
//now we can actually upload a (random) file to the round-robin store
size := chunkCount * chunkSize
log.Debug("Storing data to file store")
fileHash, wait, err := roundRobinFileStore.Store(ctx, testutil.RandomReader(1, size), int64(size), false)
// wait until all chunks stored
if err != nil {
return err
}
err = wait(ctx)
if err != nil {
return err
2018-06-20 12:06:27 +00:00
}
log.Debug("Waiting for kademlia")
swarm/network: Revised depth and health for Kademlia (#18354) * swarm/network: Revised depth calculation with tests * swarm/network: WIP remove redundant "full" function * swarm/network: WIP peerpot refactor * swarm/network: Make test methods submethod of peerpot and embed kad * swarm/network: Remove commented out code * swarm/network: Rename health test functions * swarm/network: Too many n's * swarm/network: Change hive Healthy func to accept addresses * swarm/network: Add Healthy proxy method for api in hive * swarm/network: Skip failing test out of scope for PR * swarm/network: Skip all tests dependent on SuggestPeers * swarm/network: Remove commented code and useless kad Pof member * swarm/network: Remove more unused code, add counter on depth test errors * swarm/network: WIP Create Healthy assertion tests * swarm/network: Roll back health related methods receiver change * swarm/network: Hardwire network minproxbinsize in swarm sim * swarm/network: Rework Health test to strict Pending add test for saturation And add test for as many as possible up to saturation * swarm/network: Skip discovery tests (dependent on SuggestPeer) * swarm/network: Remove useless minProxBinSize in stream * swarm/network: Remove unnecessary testing.T param to assert health * swarm/network: Implement t.Helper() in checkHealth * swarm/network: Rename check back to assert now that we have helper magic * swarm/network: Revert WaitTillHealthy change (deferred to nxt PR) * swarm/network: Kademlia tests GotNN => ConnectNN * swarm/network: Renames and comments * swarm/network: Add comments
2018-12-22 05:53:30 +00:00
// TODO this does not seem to be correct usage of the function, as the simulation may have no kademlias
if _, err := sim.WaitTillHealthy(ctx); err != nil {
return err
}
//get the pivot node's filestore
item, ok := sim.NodeItem(pivot, bucketKeyFileStore)
if !ok {
return fmt.Errorf("No filestore")
}
pivotFileStore := item.(*storage.FileStore)
log.Debug("Starting retrieval routine")
retErrC := make(chan error)
2018-06-20 12:06:27 +00:00
go func() {
// start the retrieval on the pivot node - this will spawn retrieve requests for missing chunks
// we must wait for the peer connections to have started before requesting
n, err := readAll(pivotFileStore, fileHash)
2018-06-20 12:06:27 +00:00
log.Info(fmt.Sprintf("retrieved %v", fileHash), "read", n, "err", err)
retErrC <- err
2018-06-20 12:06:27 +00:00
}()
log.Debug("Watching for disconnections")
disconnections := sim.PeerEvents(
context.Background(),
sim.NodeIDs(),
simulation.NewPeerEventsFilter().Drop(),
)
var disconnected atomic.Value
go func() {
for d := range disconnections {
if d.Error != nil {
log.Error("peer drop", "node", d.NodeID, "peer", d.PeerID)
disconnected.Store(true)
}
}
}()
defer func() {
if err != nil {
if yes, ok := disconnected.Load().(bool); ok && yes {
err = errors.New("disconnect events received")
}
}
}()
//finally check that the pivot node gets all chunks via the root hash
log.Debug("Check retrieval")
success := true
2018-06-20 12:06:27 +00:00
var total int64
total, err = readAll(pivotFileStore, fileHash)
if err != nil {
return err
}
2018-06-20 12:06:27 +00:00
log.Info(fmt.Sprintf("check if %08x is available locally: number of bytes read %v/%v (error: %v)", fileHash, total, size, err))
if err != nil || total != int64(size) {
success = false
2018-06-20 12:06:27 +00:00
}
if !success {
return fmt.Errorf("Test failed, chunks not available on all nodes")
}
if err := <-retErrC; err != nil {
t.Fatalf("requesting chunks: %v", err)
}
log.Debug("Test terminated successfully")
return nil
})
2018-06-20 12:06:27 +00:00
if result.Error != nil {
t.Fatal(result.Error)
2018-06-20 12:06:27 +00:00
}
}
func BenchmarkDeliveryFromNodesWithoutCheck(b *testing.B) {
for chunks := 32; chunks <= 128; chunks *= 2 {
for i := 2; i < 32; i *= 2 {
b.Run(
fmt.Sprintf("nodes=%v,chunks=%v", i, chunks),
func(b *testing.B) {
benchmarkDeliveryFromNodes(b, i, chunks, true)
2018-06-20 12:06:27 +00:00
},
)
}
}
}
func BenchmarkDeliveryFromNodesWithCheck(b *testing.B) {
for chunks := 32; chunks <= 128; chunks *= 2 {
for i := 2; i < 32; i *= 2 {
b.Run(
fmt.Sprintf("nodes=%v,chunks=%v", i, chunks),
func(b *testing.B) {
benchmarkDeliveryFromNodes(b, i, chunks, false)
2018-06-20 12:06:27 +00:00
},
)
}
}
}
func benchmarkDeliveryFromNodes(b *testing.B, nodes, chunkCount int, skipCheck bool) {
sim := simulation.New(map[string]simulation.ServiceFunc{
"streamer": func(ctx *adapters.ServiceContext, bucket *sync.Map) (s node.Service, cleanup func(), err error) {
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-24 22:59:00 +00:00
node := ctx.Config.Node()
addr := network.NewAddr(node)
store, datadir, err := createTestLocalStorageForID(node.ID(), addr)
2018-06-20 12:06:27 +00:00
if err != nil {
return nil, nil, err
2018-06-20 12:06:27 +00:00
}
bucket.Store(bucketKeyStore, store)
cleanup = func() {
os.RemoveAll(datadir)
store.Close()
2018-06-20 12:06:27 +00:00
}
localStore := store.(*storage.LocalStore)
netStore, err := storage.NewNetStore(localStore, nil)
if err != nil {
return nil, nil, err
}
kad := network.NewKademlia(addr.Over(), network.NewKadParams())
delivery := NewDelivery(kad, netStore)
netStore.NewNetFetcherFunc = network.NewFetcherFactory(delivery.RequestFromPeers, true).New
all: new p2p node representation (#17643) Package p2p/enode provides a generalized representation of p2p nodes which can contain arbitrary information in key/value pairs. It is also the new home for the node database. The "v4" identity scheme is also moved here from p2p/enr to remove the dependency on Ethereum crypto from that package. Record signature handling is changed significantly. The identity scheme registry is removed and acceptable schemes must be passed to any method that needs identity. This means records must now be validated explicitly after decoding. The enode API is designed to make signature handling easy and safe: most APIs around the codebase work with enode.Node, which is a wrapper around a valid record. Going from enr.Record to enode.Node requires a valid signature. * p2p/discover: port to p2p/enode This ports the discovery code to the new node representation in p2p/enode. The wire protocol is unchanged, this can be considered a refactoring change. The Kademlia table can now deal with nodes using an arbitrary identity scheme. This requires a few incompatible API changes: - Table.Lookup is not available anymore. It used to take a public key as argument because v4 protocol requires one. Its replacement is LookupRandom. - Table.Resolve takes *enode.Node instead of NodeID. This is also for v4 protocol compatibility because nodes cannot be looked up by ID alone. - Types Node and NodeID are gone. Further commits in the series will be fixes all over the the codebase to deal with those removals. * p2p: port to p2p/enode and discovery changes This adapts package p2p to the changes in p2p/discover. All uses of discover.Node and discover.NodeID are replaced by their equivalents from p2p/enode. New API is added to retrieve the enode.Node instance of a peer. The behavior of Server.Self with discovery disabled is improved. It now tries much harder to report a working IP address, falling back to 127.0.0.1 if no suitable address can be determined through other means. These changes were needed for tests of other packages later in the series. * p2p/simulations, p2p/testing: port to p2p/enode No surprises here, mostly replacements of discover.Node, discover.NodeID with their new equivalents. The 'interesting' API changes are: - testing.ProtocolSession tracks complete nodes, not just their IDs. - adapters.NodeConfig has a new method to create a complete node. These changes were needed to make swarm tests work. Note that the NodeID change makes the code incompatible with old simulation snapshots. * whisper/whisperv5, whisper/whisperv6: port to p2p/enode This port was easy because whisper uses []byte for node IDs and URL strings in the API. * eth: port to p2p/enode Again, easy to port because eth uses strings for node IDs and doesn't care about node information in any way. * les: port to p2p/enode Apart from replacing discover.NodeID with enode.ID, most changes are in the server pool code. It now deals with complete nodes instead of (Pubkey, IP, Port) triples. The database format is unchanged for now, but we should probably change it to use the node database later. * node: port to p2p/enode This change simply replaces discover.Node and discover.NodeID with their new equivalents. * swarm/network: port to p2p/enode Swarm has its own node address representation, BzzAddr, containing both an overlay address (the hash of a secp256k1 public key) and an underlay address (enode:// URL). There are no changes to the BzzAddr format in this commit, but certain operations such as creating a BzzAddr from a node ID are now impossible because node IDs aren't public keys anymore. Most swarm-related changes in the series remove uses of NewAddrFromNodeID, replacing it with NewAddr which takes a complete node as argument. ToOverlayAddr is removed because we can just use the node ID directly.
2018-09-24 22:59:00 +00:00
r := NewRegistry(addr.ID(), delivery, netStore, state.NewInmemoryStore(), &RegistryOptions{
SkipCheck: skipCheck,
Syncing: SyncingDisabled,
Retrieval: RetrievalDisabled,
SyncUpdateDelay: 0,
}, nil)
fileStore := storage.NewFileStore(netStore, storage.NewFileStoreParams())
bucket.Store(bucketKeyFileStore, fileStore)
2018-06-20 12:06:27 +00:00
return r, cleanup, nil
2018-06-20 12:06:27 +00:00
},
})
defer sim.Close()
2018-06-20 12:06:27 +00:00
log.Info("Initializing test config")
_, err := sim.AddNodesAndConnectChain(nodes)
2018-06-20 12:06:27 +00:00
if err != nil {
b.Fatal(err)
2018-06-20 12:06:27 +00:00
}
ctx := context.Background()
result := sim.Run(ctx, func(ctx context.Context, sim *simulation.Simulation) (err error) {
nodeIDs := sim.UpNodeIDs()
node := nodeIDs[len(nodeIDs)-1]
item, ok := sim.NodeItem(node, bucketKeyFileStore)
if !ok {
b.Fatal("No filestore")
2018-06-20 12:06:27 +00:00
}
remoteFileStore := item.(*storage.FileStore)
pivotNode := nodeIDs[0]
item, ok = sim.NodeItem(pivotNode, bucketKeyNetStore)
if !ok {
b.Fatal("No filestore")
2018-06-20 12:06:27 +00:00
}
netStore := item.(*storage.NetStore)
if _, err := sim.WaitTillHealthy(ctx); err != nil {
return err
2018-06-20 12:06:27 +00:00
}
disconnections := sim.PeerEvents(
context.Background(),
sim.NodeIDs(),
simulation.NewPeerEventsFilter().Drop(),
)
var disconnected atomic.Value
go func() {
for d := range disconnections {
if d.Error != nil {
log.Error("peer drop", "node", d.NodeID, "peer", d.PeerID)
disconnected.Store(true)
}
}
}()
defer func() {
if err != nil {
if yes, ok := disconnected.Load().(bool); ok && yes {
err = errors.New("disconnect events received")
}
}
}()
// benchmark loop
b.ResetTimer()
2018-06-20 12:06:27 +00:00
b.StopTimer()
Loop:
for i := 0; i < b.N; i++ {
// uploading chunkCount random chunks to the last node
hashes := make([]storage.Address, chunkCount)
for i := 0; i < chunkCount; i++ {
// create actual size real chunks
ctx := context.TODO()
hash, wait, err := remoteFileStore.Store(ctx, testutil.RandomReader(i, chunkSize), int64(chunkSize), false)
if err != nil {
b.Fatalf("expected no error. got %v", err)
}
// wait until all chunks stored
err = wait(ctx)
if err != nil {
b.Fatalf("expected no error. got %v", err)
}
// collect the hashes
hashes[i] = hash
}
// now benchmark the actual retrieval
// netstore.Get is called for each hash in a go routine and errors are collected
b.StartTimer()
errs := make(chan error)
for _, hash := range hashes {
go func(h storage.Address) {
_, err := netStore.Get(ctx, h)
log.Warn("test check netstore get", "hash", h, "err", err)
errs <- err
}(hash)
}
// count and report retrieval errors
// if there are misses then chunk timeout is too low for the distance and volume (?)
var total, misses int
for err := range errs {
if err != nil {
log.Warn(err.Error())
misses++
}
total++
if total == chunkCount {
break
}
}
b.StopTimer()
2018-06-20 12:06:27 +00:00
if misses > 0 {
err = fmt.Errorf("%v chunk not found out of %v", misses, total)
2018-06-20 12:06:27 +00:00
break Loop
}
}
if err != nil {
b.Fatal(err)
2018-06-20 12:06:27 +00:00
}
return nil
})
if result.Error != nil {
b.Fatal(result.Error)
2018-06-20 12:06:27 +00:00
}
}