# nitro-bridge demo

## Setup

### L1 eth and L2 Optimism Stacks

- Clone the stack repo:

  ```bash
  laconic-so fetch-stack git.vdb.to/cerc-io/fixturenet-eth-stacks --pull
  laconic-so fetch-stack git.vdb.to/cerc-io/fixturenet-optimism-stack --pull
  ```

- Clone required repositories:

  ```bash
  # L1 (fixturenet-eth)
  laconic-so --stack ~/cerc/fixturenet-eth-stacks/stack-orchestrator/stacks/fixturenet-eth setup-repositories --pull

  # L2 (optimism)
  laconic-so --stack ~/cerc/fixturenet-optimism-stack/stack/fixturenet-optimism setup-repositories --pull

  # If this throws an error as a result of being already checked out to a branch/tag in a repo, remove all repositories from that stack and re-run the command
  # The repositories are located in $HOME/cerc by default
  ```

- Build the container images:

  ```bash
  # Remove any older foundry image with `latest` tag
  docker rmi ghcr.io/foundry-rs/foundry:latest

  # L1 (fixturenet-eth)
  laconic-so --stack ~/cerc/fixturenet-eth-stacks/stack-orchestrator/stacks/fixturenet-eth build-containers --force-rebuild

  # L2 (optimism)
  laconic-so --stack ~/cerc/fixturenet-optimism-stack/stack/fixturenet-optimism build-containers --force-rebuild

  # If errors are thrown during build, old images used by this stack would have to be deleted
  ```

  - NOTE: this will take >10 mins depending on the specs of your machine, and **requires** 16GB of memory or greater.

  - Remove any dangling Docker images (to clear up space):

    ```bash
    docker image prune
    ```

- Create spec files for deployments, which will map the stack's ports and volumes to the host:

  ```bash
  laconic-so --stack ~/cerc/fixturenet-eth-stacks/stack-orchestrator/stacks/fixturenet-eth deploy init --output fixturenet-eth-spec.yml

  laconic-so --stack ~/cerc/fixturenet-optimism-stack/stack/fixturenet-optimism deploy init --output fixturenet-optimism-spec.yml
  ```

- Configure ports:
  - `fixturenet-eth-spec.yml`

    ```yml
    ...
    network:
      ports:
        fixturenet-eth-bootnode-geth:
          - '9898:9898'
          - '30303'
        fixturenet-eth-geth-1:
          - '8545:8545'
          - '8546:8546'
          - '40000'
          - '6060'
        fixturenet-eth-lighthouse-1:
          - '8001'
    ...
    ```

  - `fixturenet-optimism-spec.yml`

    ```yml
    ...
    network:
      ports:
        op-geth:
          - '9545:8545'
          - '9546:8546'
        ...
    ```

- Create deployments:
  Once you've made any needed changes to the spec files, create deployments from them:

  ```bash
  laconic-so --stack ~/cerc/fixturenet-eth-stacks/stack-orchestrator/stacks/fixturenet-eth deploy create --spec-file fixturenet-eth-spec.yml --deployment-dir fixturenet-eth-deployment

  laconic-so --stack ~/cerc/fixturenet-optimism-stack/stack/fixturenet-optimism deploy create --spec-file fixturenet-optimism-spec.yml --deployment-dir fixturenet-optimism-deployment

  # Place them both in the same namespace (cluster)
  cp fixturenet-eth-deployment/deployment.yml fixturenet-optimism-deployment/deployment.yml
  ```

- Env configuration:

  ```bash
  cat <<EOF > fixturenet-eth-deployment/config.env
  CERC_ALLOW_UNPROTECTED_TXS=true
  EOF
  ```

### Go-nitro

- Clone the stack repo:

  ```bash
  laconic-so fetch-stack git.vdb.to/cerc-io/nitro-stack --git-ssh --pull
  ```

- Clone required repositories:

  ```bash
  laconic-so --stack ~/cerc/nitro-stack/stack-orchestrator/stacks/nitro-node setup-repositories --git-ssh --pull
  ```

- Build the container images:

    ```bash
    laconic-so --stack ~/cerc/nitro-stack/stack-orchestrator/stacks/nitro-node build-containers --force-rebuild
    ```

- Create a deployment spec-file for Alice's L1 nitro-node:
  - Create spec file for the deployment:

    ```bash
    laconic-so --stack ~/cerc/nitro-stack/stack-orchestrator/stacks/nitro-node deploy init --output l1alice-nitro-spec.yml
    ```

  - Edit `network` in the spec file to map container ports to host ports as required:

    ```bash
    # l1alice-nitro-spec.yml
    ...
    network:
      ports:
        nitro-node:
          - 3007:3005
          - 4007:4005
    ```

- Create a deployment spec-file for Charlie's L1 nitro-node:
  - Create spec file for the deployment:

    ```bash
    laconic-so --stack ~/cerc/nitro-stack/stack-orchestrator/stacks/nitro-node deploy init --output l1charlie-nitro-spec.yml
    ```

  - Edit `network` in the spec file to map container ports to host ports as required:

    ```bash
    # l1charlie-nitro-spec.yml
    ...
    network:
      ports:
        nitro-node:
          - 3008:3005
          - 4008:4005
    ```

- Create a deployment spec-file for Alice's L2 nitro-node:
  - Create spec file for the deployment:

    ```bash
    laconic-so --stack ~/cerc/nitro-stack/stack-orchestrator/stacks/nitro-node deploy init --output l2alice-nitro-spec.yml
    ```

  - Edit `network` in the spec file to map container ports to host ports as required:

    ```bash
    # l2alice-nitro-spec.yml
    ...
    network:
      ports:
        nitro-node:
          - 3009:3005
          - 4009:4005
    ```

- Create a deployment spec-file for Charlie's L2 nitro-node:
  - Create spec file for the deployment:

    ```bash
    laconic-so --stack ~/cerc/nitro-stack/stack-orchestrator/stacks/nitro-node deploy init --output l2charlie-nitro-spec.yml
    ```

  - Edit `network` in the spec file to map container ports to host ports as required:

    ```bash
    # l2charlie-nitro-spec.yml
    ...
    network:
      ports:
        nitro-node:
          - 3010:3005
          - 4010:4005
    ```

## Run

- Start L1, L2 stacks:
  (run steps in directory where the stack deployments had been created)

  - Start `fixturenet-eth-deployment` deployment:

    ```bash
    laconic-so deployment --dir fixturenet-eth-deployment start
    ```

    - Check status of L1

      - Run status check:

        ```bash
        laconic-so deployment --dir fixturenet-eth-deployment exec fixturenet-eth-bootnode-lighthouse "/scripts/status-internal.sh"
        ```

      - Check geth logs to ensure that new blocks are getting created

        ```bash
        laconic-so deployment --dir fixturenet-eth-deployment logs -f fixturenet-eth-geth-1
        ```

  - Start `fixturenet-optimism-deployment` deployment:

    ```bash
    laconic-so deployment --dir fixturenet-optimism-deployment start
    ```

    NOTE: The `fixturenet-optimism-contracts` service will configure and deploy the Optimism contracts to L1, exiting when complete. This may take several minutes; you can follow the progress by following the container's logs

    - Follow optimism contracts deployment logs:

      ```bash
      laconic-so deployment --dir fixturenet-optimism-deployment logs -f fixturenet-optimism-contracts
      ```

    - Check L2 logs:

      ```bash
      laconic-so deployment --dir fixturenet-optimism-deployment logs -f op-geth

      # Ensure new blocks are getting created
      ```

- Send ETH from L1 to L2 (run steps in directory where the stack deployments had been created)

  - Get information about funded accounts on L1

    ```bash
    curl 127.0.0.1:9898/accounts.csv
    ```

  - Send some ETH from the desired account to the `L1StandardBridgeProxy` contract on L1 to bridge it to L2:
    - Set the following variables:

      ```bash
      L1_RPC=http://fixturenet-eth-geth-1:8545
      L2_RPC=http://op-geth:8545

      DEPLOYMENT_CONTEXT=1212
      ACCOUNT=0xe6CE22afe802CAf5fF7d3845cec8c736ecc8d61F
      ```

    - Read the bridge contract address from the L1 deployment records in the `op-node` container:

      ```bash
      BRIDGE=$(laconic-so deployment --dir fixturenet-optimism-deployment exec op-node "cat /l1-deployment/$DEPLOYMENT_CONTEXT-deploy.json" | jq -r .L1StandardBridgeProxy)

      # Get the funded account's pk
      ACCOUNT_PK=$(laconic-so deployment --dir fixturenet-optimism-deployment exec op-node "jq -r '.AdminKey' /l2-accounts/accounts.json")
      ```

    - Use cast to send ETH to the bridge contract:

      ```bash
      laconic-so deployment --dir fixturenet-eth-deployment exec foundry "cast send --from $ACCOUNT --value 1ether $BRIDGE --rpc-url $L1_RPC --private-key $ACCOUNT_PK"
      ```

      NOTE: This is for sending funds to the contracts deployer account which is also the Bridge node account

    - Allow a couple minutes for the bridge to complete

  - Check balance on L2

    ```bash
    laconic-so deployment --dir fixturenet-eth-deployment exec foundry "cast balance $ACCOUNT --rpc-url $L2_RPC"

    # 100000000000000000
    ```

- Deploy L1 nitro contracts

  - Create a deployment spec-file for L1 nitro contract:

    ```bash
    laconic-so --stack ~/cerc/nitro-stack/stack-orchestrator/stacks/nitro-contracts deploy init --output nitro-contracts-spec.yml --config "\
    GETH_URL=http://host.docker.internal:8545,\
    GETH_DEPLOYER_PK=888814df89c4358d7ddb3fa4b0213e7331239a80e1f013eaa7b2deca2a41a218,\
    GETH_CHAIN_ID=1212,\
    TOKEN_NAME=LaconicNetworkToken,\
    TOKEN_SYMBOL=LNT,\
    INITIAL_TOKEN_SUPPLY=129600"
    ```

  - Create a deployment `nitro-contracts` from the spec file

    ```bash
    laconic-so --stack ~/cerc/nitro-stack/stack-orchestrator/stacks/nitro-contracts deploy create --spec-file nitro-contracts-spec.yml --deployment-dir nitro-contracts-deployment
    ```

  - Start `nitro-contracts` deployment:

    ```bash
    laconic-so deployment --dir nitro-contracts-deployment start

    # Check the L1 nitro contract deployments
    laconic-so deployment --dir nitro-contracts-deployment logs nitro-contracts -f
    ```

- Run the bridge:

  - Get the deployed nitro contract addresses (run in the directory where the deployments were created):

      ```bash
      # Nitro contract addresses
      export GETH_CHAIN_ID="1212"
      export NA_ADDRESS=$(laconic-so deployment --dir nitro-contracts-deployment exec nitro-contracts "jq -r '.\"$GETH_CHAIN_ID\"[0].contracts.NitroAdjudicator.address' /app/deployment/nitro-addresses.json")
      export CA_ADDRESS=$(laconic-so deployment --dir nitro-contracts-deployment exec nitro-contracts "jq -r '.\"$GETH_CHAIN_ID\"[0].contracts.ConsensusApp.address' /app/deployment/nitro-addresses.json")
      export VPA_ADDRESS=$(laconic-so deployment --dir nitro-contracts-deployment exec nitro-contracts "jq -r '.\"$GETH_CHAIN_ID\"[0].contracts.VirtualPaymentApp.address' /app/deployment/nitro-addresses.json")
      export L1_ASSET_ADDRESS=$(laconic-so deployment --dir nitro-contracts-deployment exec nitro-contracts "jq -r '.\"$GETH_CHAIN_ID\"[0].contracts.Token.address' /app/deployment/nitro-addresses.json")
      ```

  - Create a spec-file for the deployment, map container ports to host ports and set env variables:

      ```bash
      laconic-so --stack ~/cerc/nitro-stack/stack-orchestrator/stacks/bridge deploy init --map-ports-to-host any-same --output bridge-nitro-spec.yml --config "\
      NITRO_L1_CHAIN_URL=ws://host.docker.internal:8546,\
      NITRO_L2_CHAIN_URL=ws://host.docker.internal:9546,\
      NITRO_CHAIN_PK=888814df89c4358d7ddb3fa4b0213e7331239a80e1f013eaa7b2deca2a41a218,\
      NITRO_SC_PK=0279651921cd800ac560c21ceea27aab0107b67daf436cdd25ce84cad30159b4,\
      OPTIMISM_URL=http://host.docker.internal:9545,\
      OPTIMISM_DEPLOYER_PK=$ACCOUNT_PK,\
      TOKEN_NAME=LaconicNetworkToken,\
      TOKEN_SYMBOL=LNT,\
      INITIAL_TOKEN_SUPPLY=129600,\
      NA_ADDRESS=$NA_ADDRESS,\
      VPA_ADDRESS=$VPA_ADDRESS,\
      CA_ADDRESS=$CA_ADDRESS,\
      L1_ASSET_ADDRESS=$L1_ASSET_ADDRESS"
      ```

  - Create a deployment from the spec file:

      ```bash
      laconic-so --stack ~/cerc/nitro-stack/stack-orchestrator/stacks/bridge deploy create --spec-file bridge-nitro-spec.yml --deployment-dir bridge-deployment
      ```

  - Start the nitro bridge

      ```bash
      laconic-so deployment --dir bridge-deployment start

      # Check the l2 nitro contract deployments
      laconic-so deployment --dir bridge-deployment logs l2-nitro-contracts -f

      # Check the logs, ensure that the node is running
      laconic-so deployment --dir bridge-deployment logs nitro-bridge -f
      ```

- Send custom tokens to Alice and Charlie on L1

  - Export variables for L1 token address

    ```bash
    export GETH_CHAIN_ID="1212"
    export L1_ASSET_ADDRESS=$(laconic-so deployment --dir nitro-contracts-deployment exec nitro-contracts "jq -r '.\"$GETH_CHAIN_ID\"[0].contracts.Token.address' /app/deployment/nitro-addresses.json")

    export A_CHAIN_ADDRESS="0xe22AD83A0dE117bA0d03d5E94Eb4E0d80a69C62a"
    export C_CHAIN_ADDRESS="0xf1ac8Dd1f6D6F5c0dA99097c57ebF50CD99Ce293"
    ```

  - Send tokens to Alice and Charlie

    ```bash
    # Send tokens to Alice
    laconic-so deployment --dir nitro-contracts-deployment exec nitro-contracts "cd packages/nitro-protocol && yarn hardhat transfer --contract $L1_ASSET_ADDRESS --to $A_CHAIN_ADDRESS --amount 1000 --network geth"

    #Send tokens to Charlie
    laconic-so deployment --dir nitro-contracts-deployment exec nitro-contracts "cd packages/nitro-protocol && yarn hardhat transfer --contract $L1_ASSET_ADDRESS --to $C_CHAIN_ADDRESS --amount 1000 --network geth"
    ```

- Get the deployed nitro contract addresses (run in the directory where the deployments were created):

    ```bash
    # Nitro contract addresses
    export GETH_CHAIN_ID="1212"
    export NA_ADDRESS=$(laconic-so deployment --dir nitro-contracts-deployment exec nitro-contracts "jq -r '.\"$GETH_CHAIN_ID\"[0].contracts.NitroAdjudicator.address' /app/deployment/nitro-addresses.json")
    export CA_ADDRESS=$(laconic-so deployment --dir nitro-contracts-deployment exec nitro-contracts "jq -r '.\"$GETH_CHAIN_ID\"[0].contracts.ConsensusApp.address' /app/deployment/nitro-addresses.json")
    export VPA_ADDRESS=$(laconic-so deployment --dir nitro-contracts-deployment exec nitro-contracts "jq -r '.\"$GETH_CHAIN_ID\"[0].contracts.VirtualPaymentApp.address' /app/deployment/nitro-addresses.json")

    # Contract address of bridge
    export OPTIMISM_CHAIN_ID="42069"
    export BRIDGE_ADDRESS=$(laconic-so deployment --dir bridge-deployment exec nitro-bridge "jq -r '.\"$OPTIMISM_CHAIN_ID\"[0].contracts.Bridge.address' /app/deployment/nitro-addresses.json")
    ```

  ```bash
  export A_PRIVATE_KEY=0x9aebbd42f3044295411e3631fcb6aa834ed5373a6d3bf368bfa09e5b74f4f6d1
  export C_PRIVATE_KEY=0x19242258fc60ec7488db0163b20ed1c32f2d27dc49e4d427a461e20a6656de20
  ```

- Prepare deployments for the nodes

  - Create a deployment `l1alice-nitro-deployment` from the spec file

    ```bash
    laconic-so --stack ~/cerc/nitro-stack/stack-orchestrator/stacks/nitro-node deploy create --spec-file l1alice-nitro-spec.yml --deployment-dir l1alice-nitro-deployment
    ```

  - Set the env variables for L1 Alice's nitro-node:

    ```bash
    cat <<EOF > l1alice-nitro-deployment/config.env
    NITRO_CHAIN_URL=ws://host.docker.internal:8546
    NITRO_SC_PK=$A_PRIVATE_KEY
    NITRO_CHAIN_PK=570b909da9669b2f35a0b1ac70b8358516d55ae1b5b3710e95e9a94395090597
    NA_ADDRESS=$NA_ADDRESS
    VPA_ADDRESS=$VPA_ADDRESS
    CA_ADDRESS=$CA_ADDRESS
    NITRO_BOOTPEERS=/dns4/host.docker.internal/tcp/3005/p2p/16Uiu2HAmJDxLM8rSybX78FH51iZq9PdrwCoCyyHRBCndNzcAYMes
    NITRO_EXT_MULTIADDR=/dns4/host.docker.internal/tcp/3007
    EOF
    ```

  - Create a deployment `l1charlie-nitro-deployment` from the spec file

    ```bash
    laconic-so --stack ~/cerc/nitro-stack/stack-orchestrator/stacks/nitro-node deploy create --spec-file l1charlie-nitro-spec.yml --deployment-dir l1charlie-nitro-deployment
    ```

  - Set the env variables for L1 Charlie's nitro-node:

    ```bash
    cat <<EOF > l1charlie-nitro-deployment/config.env
    NITRO_CHAIN_URL=ws://host.docker.internal:8546
    NITRO_SC_PK=$C_PRIVATE_KEY
    NITRO_CHAIN_PK=111b7500bdce494d6f4bcfe8c2a0dde2ef92f751d9070fac6475dbd6d8021b3f
    NA_ADDRESS=$NA_ADDRESS
    VPA_ADDRESS=$VPA_ADDRESS
    CA_ADDRESS=$CA_ADDRESS
    NITRO_BOOTPEERS=/dns4/host.docker.internal/tcp/3005/p2p/16Uiu2HAmJDxLM8rSybX78FH51iZq9PdrwCoCyyHRBCndNzcAYMes
    NITRO_EXT_MULTIADDR=/dns4/host.docker.internal/tcp/3008
    EOF
    ```

  - Create a deployment `l2alice-nitro-deployment` from the spec file:

    ```bash
    laconic-so --stack ~/cerc/nitro-stack/stack-orchestrator/stacks/nitro-node deploy create --spec-file l2alice-nitro-spec.yml --deployment-dir l2alice-nitro-deployment
    ```

  - Set the env variables for L2 Alice's nitro-node:

    ```bash
    cat <<EOF > l2alice-nitro-deployment/config.env
    NITRO_CHAIN_URL=ws://host.docker.internal:9546
    NITRO_SC_PK=$A_PRIVATE_KEY
    NITRO_CHAIN_PK=570b909da9669b2f35a0b1ac70b8358516d55ae1b5b3710e95e9a94395090597
    NA_ADDRESS=$NA_ADDRESS
    VPA_ADDRESS=$VPA_ADDRESS
    CA_ADDRESS=$CA_ADDRESS
    BRIDGE_ADDRESS=$BRIDGE_ADDRESS
    NITRO_BOOTPEERS=/dns4/host.docker.internal/tcp/3006/p2p/16Uiu2HAmJDxLM8rSybX78FH51iZq9PdrwCoCyyHRBCndNzcAYMes
    NITRO_EXT_MULTIADDR=/dns4/host.docker.internal/tcp/3009
    NITRO_L2=true
    EOF
    ```

  - Create deployment `l2charlie-nitro-deployment` from the spec files:

    ```bash
    laconic-so --stack ~/cerc/nitro-stack/stack-orchestrator/stacks/nitro-node deploy create --spec-file l2charlie-nitro-spec.yml --deployment-dir l2charlie-nitro-deployment
    ```

  - Set the env variables for L2 Charlie's nitro-node:

    ```bash
    cat <<EOF > l2charlie-nitro-deployment/config.env
    NITRO_CHAIN_URL=ws://host.docker.internal:9546
    NITRO_SC_PK=$C_PRIVATE_KEY
    NITRO_CHAIN_PK=111b7500bdce494d6f4bcfe8c2a0dde2ef92f751d9070fac6475dbd6d8021b3f
    NA_ADDRESS=$NA_ADDRESS
    VPA_ADDRESS=$VPA_ADDRESS
    CA_ADDRESS=$CA_ADDRESS
    BRIDGE_ADDRESS=$BRIDGE_ADDRESS
    NITRO_BOOTPEERS=/dns4/host.docker.internal/tcp/3006/p2p/16Uiu2HAmJDxLM8rSybX78FH51iZq9PdrwCoCyyHRBCndNzcAYMes
    NITRO_EXT_MULTIADDR=/dns4/host.docker.internal/tcp/3010
    NITRO_L2=true
    EOF
    ```

- Start nitro nodes for Alice and Charlie on L1 and L2:

  - Start the deployment for Alice's L1 node

    ```bash
    laconic-so deployment --dir l1alice-nitro-deployment start

    # Check the logs, ensure that the node is running
    laconic-so deployment --dir l1alice-nitro-deployment logs nitro-node -f
    ```

  - Start the deployment for Charlie's L1 node

    ```bash
    laconic-so deployment --dir l1charlie-nitro-deployment start

    # Check the logs, ensure that the node is running
    laconic-so deployment --dir l1charlie-nitro-deployment logs nitro-node -f
    ```

  - Start the deployment for Alice's L2 node

    ```bash
    laconic-so deployment --dir l2alice-nitro-deployment start

    # Check the logs, ensure that the node is running
    laconic-so deployment --dir l2alice-nitro-deployment logs nitro-node -f
    ```

  - Start the deployment for Charlie's L2 node

    ```bash
    laconic-so deployment --dir l2charlie-nitro-deployment start

    # Check the logs, ensure that the node is running
    laconic-so deployment --dir l2charlie-nitro-deployment logs nitro-node -f
    ```

## Demo

- Create ledger channels on L1 and mirrored channels on L2
  - Open new terminal, check that no channels exist on L2

    ```bash
    laconic-so deployment --dir bridge-deployment exec nitro-rpc-client "nitro-rpc-client get-all-l2-channels -p 4006 -h nitro-bridge"

    # Expected output:
    # []
    ```

  - Set address of bridge and address of custom token on L1 in the current terminal

    ```bash
    export BRIDGE_NITRO_ADDRESS=0xBBB676f9cFF8D242e9eaC39D063848807d3D1D94
    export GETH_CHAIN_ID="1212"
    export L1_ASSET_ADDRESS=$(laconic-so deployment --dir nitro-contracts-deployment exec nitro-contracts "jq -r '.\"$GETH_CHAIN_ID\"[0].contracts.Token.address' /app/deployment/nitro-addresses.json")
    ```

  - Create ledger channel between A and Bridge with custom token

    ```bash
    laconic-so deployment --dir l1alice-nitro-deployment exec nitro-rpc-client "nitro-rpc-client direct-fund $BRIDGE_NITRO_ADDRESS --assetAddress $L1_ASSET_ADDRESS --alphaAmount 1000000 --betaAmount 1000000 -p 4005 -h nitro-node"

    # Expected Output:
    # Objective started DirectFunding-0x161d289a50222caa781db215bb82a3ede4f557217742245525b8e8cbff04ec21
    # Channel Open 0x161d289a50222caa781db215bb82a3ede4f557217742245525b8e8cbff04ec21
    ```

    - Once direct-fund objective is complete, bridge will create mirrored channel on L2

    - Check node A' logs to see bridged-fund objective completed

      ```bash
      laconic-so deployment --dir l2alice-nitro-deployment logs nitro-node -f --tail 30

      # Expected Output:
      # nitro-node-1  | 5:01AM INF INFO Objective cranked address=0xaaa6628ec44a8a742987ef3a114ddfe2d4f7adce objective-id=bridgedfunding-0x6a9f5ccf1fa802525d794f4a899897f947615f6acc7141e61e056a8bfca29179 waiting-for=WaitingForNothing
      # nitro-node-1  | 5:01AM INF INFO Objective is complete & returned to API address=0xaaa6628ec44a8a742987ef3a114ddfe2d4f7adce objective-id=bridgedfunding-0x6a9f5ccf1fa802525d794f4a899897f947615f6acc7141e61e056a8bfca29179
      ```

    - Check the [Troubleshooting](#troubleshooting) section if command to create a ledger channel fails or gets stuck

  - Check status of L1 ledger channel between A and Bridge using channel ID in output above

    ```bash
    laconic-so deployment --dir l1alice-nitro-deployment exec nitro-rpc-client "nitro-rpc-client get-ledger-channel <ledger channel ID> -p 4005 -h nitro-node"

    # Expected output:
    # {
    #   ID: '0x161d289a50222caa781db215bb82a3ede4f557217742245525b8e8cbff04ec21',
    #   Status: 'Open',
    #   Balance: {
    #     AssetAddress: '<Token address on L1>',
    #     Me: '0xaaa6628ec44a8a742987ef3a114ddfe2d4f7adce',
    #     Them: '0xbbb676f9cff8d242e9eac39d063848807d3d1d94',
    #     MyBalance: 1000000n,
    #     TheirBalance: 1000000n
    #   },
    #   ChannelMode: 'Open'
    # }
    ```

  - Create ledger channel between C and Bridge with custom token

    ```bash
    laconic-so deployment --dir l1charlie-nitro-deployment exec nitro-rpc-client "nitro-rpc-client direct-fund $BRIDGE_NITRO_ADDRESS --assetAddress $L1_ASSET_ADDRESS --alphaAmount 1000000 --betaAmount 1000000 -p 4005 -h nitro-node"

    # Expected Output:
    # Objective started DirectFunding-0x69a3f09b6f4f94f033cf084e6e4a9453438c45b43606e9a95f5434f4c6527543
    # Channel Open 0x69a3f09b6f4f94f033cf084e6e4a9453438c45b43606e9a95f5434f4c6527543
    ```

    - Once direct fund objective is complete, bridge will create mirrored channel on L2

    - Check node C' logs to see bridged-fund objective completed

      ```bash
      laconic-so deployment --dir l2charlie-nitro-deployment logs nitro-node -f --tail 30

      # Expected Output:
      # nitro-node-1  | 5:06AM INF INFO Objective cranked address=0xa8d2d06ace9c7ffc24ee785c2695678aecdfd7a0 objective-id=bridgedfunding-0x15dbe6b996e4e46fdd6ea3e2074cbca58014dbb07368e3e7ba286df5c7b9da0d waiting-for=WaitingForNothing
      # nitro-node-1  | 5:06AM INF INFO Objective is complete & returned to API address=0xa8d2d06ace9c7ffc24ee785c2695678aecdfd7a0 objective-id=bridgedfunding-0x15dbe6b996e4e46fdd6ea3e2074cbca58014dbb07368e3e7ba286df5c7b9da0d
      ```

    - Check the [Troubleshooting](#troubleshooting) section if command to create a ledger channel fails or gets stuck

  - Check status of L1 ledger channel between C and Bridge using channel ID in output above

    ```bash
    laconic-so deployment --dir l1charlie-nitro-deployment exec nitro-rpc-client "nitro-rpc-client get-ledger-channel <ledger channel ID> -p 4005 -h nitro-node"

    # Expected output:
    # {
    #   ID: '0x69a3f09b6f4f94f033cf084e6e4a9453438c45b43606e9a95f5434f4c6527543',
    #   Status: 'Open',
    #   Balance: {
    #     AssetAddress: '<Token address on L1>',
    #     Me: '0xa8d2d06ace9c7ffc24ee785c2695678aecdfd7a0',
    #     Them: '0xbbb676f9cff8d242e9eac39d063848807d3d1d94',
    #     MyBalance: 1000000n,
    #     TheirBalance: 1000000n
    #   },
    #   ChannelMode: 'Open'
    # }
    ```

  - Check status of all L2 mirrored ledger channels

    ```bash
    laconic-so deployment --dir bridge-deployment exec nitro-rpc-client "nitro-rpc-client get-all-l2-channels -p 4006 -h nitro-bridge"

    # Expected output:
    # [
    #   {
    #     "ID": "0x15dbe6b996e4e46fdd6ea3e2074cbca58014dbb07368e3e7ba286df5c7b9da0d",
    #     "Status": "Open",
    #     "Balance": {
    #       "AssetAddress": "<Token address on L2>",
    #       "Me": "0xbbb676f9cff8d242e9eac39d063848807d3d1d94",
    #       "Them": "0xa8d2d06ace9c7ffc24ee785c2695678aecdfd7a0",
    #       "MyBalance": 1000000,
    #       "TheirBalance": 1000000
    #     },
    #     "ChannelMode": "Open"
    #   },
    #   {
    #     "ID": "0x6a9f5ccf1fa802525d794f4a899897f947615f6acc7141e61e056a8bfca29179",
    #     "Status": "Open",
    #     "Balance": {
    #       "AssetAddress": "<Token address on L2>",
    #       "Me": "0xbbb676f9cff8d242e9eac39d063848807d3d1d94",
    #       "Them": "0xaaa6628ec44a8a742987ef3a114ddfe2d4f7adce",
    #       "MyBalance": 1000000,
    #       "TheirBalance": 1000000
    #     },
    #     "ChannelMode": "Open"
    #   }
    # ]
    ```

    In above expected output the following are observed
    - In ledger channel with ID `0x6a9f5ccf1fa802525d794f4a899897f947615f6acc7141e61e056a8bfca29179`
      - Alice is a participant since `Them` address is `0xaaa6628ec44a8a742987ef3a114ddfe2d4f7adce`
      - Alice amount is `1000000` since `TheirBalance` corresponds to her amount
    - In ledger channel with ID `0x15dbe6b996e4e46fdd6ea3e2074cbca58014dbb07368e3e7ba286df5c7b9da0d`
      - Charlie is participant since `Them` address is `0xa8d2d06ace9c7ffc24ee785c2695678aecdfd7a0`
      - Charlie amount is `1000000` since `TheirBalance` corresponds to his amount

### Payments Demo in L2

- Create virtual channel on L2 from A' to C' via Bridge' as intermediary

  - Get Nitro (Ethereum) addresses for Alice and Charlie from the wallet:

    ```bash
    export A_ADDRESS=0x4B64e26da8279AB12bcd4cA9974eC2b4741e175e
    export C_ADDRESS=0x03Eb7a84E286c671836b9897AaE24b31D36f9cA8

    # Bridge's Nitro address
    export BRIDGE_NITRO_ADDRESS=0xBBB676f9cFF8D242e9eaC39D063848807d3D1D94
    ```

  - Create a virtual channel:

    ```bash
    # Starts virtual fund objective on L2 to create virtual channel from A' to C'
    laconic-so deployment --dir l2alice-nitro-deployment exec nitro-rpc-client "nitro-rpc-client virtual-fund $C_ADDRESS $BRIDGE_NITRO_ADDRESS --amount 1000 -p 4005 -h nitro-node"

    # Set the payment channel id in a variable
    PAYMENT_CHANNEL_ID=<payment channel id>
    ```

- Check payment channel between A' and C'

  ```bash
  laconic-so deployment --dir l2alice-nitro-deployment exec nitro-rpc-client "nitro-rpc-client get-payment-channel $PAYMENT_CHANNEL_ID -p 4005 -h nitro-node"

  # Expected output:
  # {
  #   ID: '0xb29aeb32c9495a793ebf7bd116232075d1e7bfe89fc82281c7d498e3ffd3e3bf',
  #   Status: 'Open',
  #   Balance: {
  #     AssetAddress: '0x0000000000000000000000000000000000000000',
  #     Payee: '0xa8d2d06ace9c7ffc24ee785c2695678aecdfd7a0',
  #     Payer: '0xaaa6628ec44a8a742987ef3a114ddfe2d4f7adce',
  #     PaidSoFar: 0n,
  #     RemainingFunds: 1000n
  #   }
  # }
  ```

- After virtual fund objective is complete, make payments

  ```bash
  laconic-so deployment --dir l2alice-nitro-deployment exec nitro-rpc-client "nitro-rpc-client pay $PAYMENT_CHANNEL_ID 200 -p 4005 -h nitro-node"

  # Expected output:
  # {
  #   Amount: 200,
  #   Channel: '0xb29aeb32c9495a793ebf7bd116232075d1e7bfe89fc82281c7d498e3ffd3e3bf'
  # }
  ```

- Check largest voucher received on the payment channel

  ```bash
  laconic-so deployment --dir l2charlie-nitro-deployment exec nitro-rpc-client "nitro-rpc-client get-voucher $PAYMENT_CHANNEL_ID -p 4005 -h nitro-node"

  # Expected output:
  # {
  #   Amount: 200,
  #   ChannelId: '0xb29aeb32c9495a793ebf7bd116232075d1e7bfe89fc82281c7d498e3ffd3e3bf',
  #   Signature: '0x8fbdb9bb91932b422c30cc07bf422e4f1c3ae1be1b60e01bbfcb193ae5c8f5b0571de84667d87b5ef9b737287faa0ddf41f1f9fc159673205679622c69fd69d81b'
  # }
  ```

- Check payment channel status again to view updated channel state

  ```bash
  laconic-so deployment --dir l2alice-nitro-deployment exec nitro-rpc-client "nitro-rpc-client get-payment-channel $PAYMENT_CHANNEL_ID -p 4005 -h nitro-node"

  # Expected output:
  # {
  #   ID: '0xb29aeb32c9495a793ebf7bd116232075d1e7bfe89fc82281c7d498e3ffd3e3bf',
  #   Status: 'Open',
  #   Balance: {
  #     AssetAddress: '0x0000000000000000000000000000000000000000',
  #     Payee: '0xa8d2d06ace9c7ffc24ee785c2695678aecdfd7a0',
  #     Payer: '0xaaa6628ec44a8a742987ef3a114ddfe2d4f7adce',
  #     PaidSoFar: 200n,
  #     RemainingFunds: 800n
  #   }
  # }
  ```

- Close payment channel after payments

  ```bash
  laconic-so deployment --dir l2alice-nitro-deployment exec nitro-rpc-client "nitro-rpc-client virtual-defund $PAYMENT_CHANNEL_ID -p 4005 -h nitro-node"
  ```

- Check L2 mirrored channels status after virtual-defund is complete:

  - Note balance change in A' node:

    ```bash
    laconic-so deployment --dir l2alice-nitro-deployment exec nitro-rpc-client "nitro-rpc-client get-all-ledger-channels -p 4005 -h nitro-node"

    # Expected output:
    # [
    #  {
    #    "ID": "0x6a9f5ccf1fa802525d794f4a899897f947615f6acc7141e61e056a8bfca29179",
    #    "Status": "Open",
    #    "Balance": {
    #      "AssetAddress": "<Token_address_on_L2>",
    #      "Me": "0xaaa6628ec44a8a742987ef3a114ddfe2d4f7adce",
    #      "Them": "0xbbb676f9cff8d242e9eac39d063848807d3d1d94",
    #      "MyBalance": 999800,
    #      "TheirBalance": 1000200
    #    },
    #    "ChannelMode": "Open"
    #  }
    # ]
    ```

  - Note balance change in C' node:

    ```bash
    laconic-so deployment --dir l2charlie-nitro-deployment exec nitro-rpc-client "nitro-rpc-client get-all-ledger-channels -p 4005 -h nitro-node"

    # Expected output:
    # [
    #  {
    #    "ID": "0x15dbe6b996e4e46fdd6ea3e2074cbca58014dbb07368e3e7ba286df5c7b9da0d",
    #    "Status": "Open",
    #    "Balance": {
    #      "AssetAddress": "<Token_address_on_L2>",
    #      "Me": "0xa8d2d06ace9c7ffc24ee785c2695678aecdfd7a0",
    #      "Them": "0xbbb676f9cff8d242e9eac39d063848807d3d1d94",
    #      "MyBalance": 1000200,
    #      "TheirBalance": 999800
    #    },
    #    "ChannelMode": "Open"
    #  }
    # ]
    ```

## Demo cleanup

- Reset nitro-node deployments:

  - Stop nitro-node deployments and remove volumes:

    ```bash
    # Run where deployments are created
    laconic-so deployment --dir l1alice-nitro-deployment stop --delete-volumes
    laconic-so deployment --dir l1charlie-nitro-deployment stop --delete-volumes
    laconic-so deployment --dir l2alice-nitro-deployment stop --delete-volumes
    laconic-so deployment --dir l2charlie-nitro-deployment stop --delete-volumes
    laconic-so deployment --dir bridge-deployment stop --delete-volumes
    ```

  - Clear nitro-nodes durable store:

    ```bash
    # Run where deployments are created
    sudo rm -rf l1alice-nitro-deployment/data/nitro_node_data/nitro-store
    sudo rm -rf l1charlie-nitro-deployment/data/nitro_node_data/nitro-store
    sudo rm -rf l2alice-nitro-deployment/data/nitro_node_data/nitro-store
    sudo rm -rf l2charlie-nitro-deployment/data/nitro_node_data/nitro-store
    sudo rm -rf bridge-deployment/data/nitro_bridge_data/bridge-store
    ```

## Re-run

- After running demo cleanup, start the deployments

  ```bash
  laconic-so deployment --dir l1alice-nitro-deployment start
  laconic-so deployment --dir l1charlie-nitro-deployment start
  laconic-so deployment --dir l2alice-nitro-deployment start
  laconic-so deployment --dir l2charlie-nitro-deployment start
  laconic-so deployment --dir bridge-deployment start
  ```

- Follow the steps from [Demo](#demo) to re-run the demo

## Cleanup

- Reset nitro-node deployments:

  - Stop nitro-node, bridge, nitro-contracts deployments and remove volumes:

    ```bash
    # Run where deployments are created
    laconic-so deployment --dir l1alice-nitro-deployment stop --delete-volumes
    laconic-so deployment --dir l1charlie-nitro-deployment stop --delete-volumes
    laconic-so deployment --dir l2alice-nitro-deployment stop --delete-volumes
    laconic-so deployment --dir l2charlie-nitro-deployment stop --delete-volumes
    laconic-so deployment --dir bridge-deployment stop --delete-volumes
    laconic-so deployment --dir nitro-contracts-deployment stop --delete-volumes
    ```

  - Clear nitro-node, nitro-contracts and bridge deployments:

    ```bash
    # Run where deployments are created
    sudo rm -rf l1alice-nitro-deployment
    sudo rm -rf l1charlie-nitro-deployment
    sudo rm -rf l2alice-nitro-deployment
    sudo rm -rf l2charlie-nitro-deployment
    sudo rm -rf bridge-deployment
    sudo rm -rf nitro-contracts-deployment
    ```

- Clean up L1 and L2 deployments:
  - Stop deployment and remove volumes:

    ```bash
    # Run where deployments are created
    laconic-so deployment --dir fixturenet-optimism-deployment stop --delete-volumes
    laconic-so deployment --dir fixturenet-eth-deployment stop --delete-volumes
    ```

  - Clear deployments:

    ```bash
    # Run where deployments are created
    sudo rm -rf fixturenet-optimism-deployment
    sudo rm -rf fixturenet-eth-deployment
    ```

## Troubleshooting

- If the ledger channel creation fails, follow these steps:

  - Check whether the status of `cerc/fixturenet-eth-geth` is `unhealthy`.

    ```bash
    docker ps
    ```

    - If the chain is not producing new blocks, restart the chain.

      ```bash
      laconic-so deployment --dir fixturenet-eth-deployment stop

      laconic-so deployment --dir fixturenet-eth-deployment start
      ```

  - Stop the nitro-rpc-client direct-fund command if it is stuck

  - Restart the failed node (for example: to restart Charlie's node)

    - Stop the failed nitro node

      ```bash
      laconic-so deployment --dir l1charlie-nitro-deployment stop
      ```

    - Remove the node's durable store and create it again

      ```bash
      sudo rm -rf l1charlie-nitro-deployment/data/nitro_node_data

      mkdir l1charlie-nitro-deployment/data/nitro_node_data
      ```

    - Restart the node and create ledger channel again

      ```bash
      laconic-so deployment --dir l1charlie-nitro-deployment start
      ```

  - Retry the ledger channel creation command