* have gas estimate call callInternal with applyTsMessages = false and other calls with applyTsMessages=true for gas caclulation optimization
* set applyTsMessages = true in CallWithGas call in shed
* update test with new callwithgas api optimization for eth call
* Update chain/stmgr/call.go
Co-authored-by: Łukasz Magiera <magik6k@users.noreply.github.com>
* env flag LOTUS_SKIP_APPLY_TS_MESSAGE_CALL_WITH_GAS must be 1 in order to have applyTsMessages change
* env flag LOTUS_SKIP_APPLY_TS_MESSAGE_CALL_WITH_GAS must be 1 in order to have applyTsMessages change
* make sure that even if we arent apply ts messages we grab ts messages from the particular user who is requesting gas estimation
---------
Co-authored-by: Jiaying Wang <42981373+jennijuju@users.noreply.github.com>
Co-authored-by: Łukasz Magiera <magik6k@users.noreply.github.com>
Co-authored-by: Ubuntu <ubuntu@ip-10-0-4-29.us-east-2.compute.internal>
* have gas estimate call callInternal with applyTsMessages = false and other calls with applyTsMessages=true for gas caclulation optimization
* set applyTsMessages = true in CallWithGas call in shed
* update test with new callwithgas api optimization for eth call
* Update chain/stmgr/call.go
Co-authored-by: Łukasz Magiera <magik6k@users.noreply.github.com>
* env flag LOTUS_SKIP_APPLY_TS_MESSAGE_CALL_WITH_GAS must be 1 in order to have applyTsMessages change
* env flag LOTUS_SKIP_APPLY_TS_MESSAGE_CALL_WITH_GAS must be 1 in order to have applyTsMessages change
* make sure that even if we arent apply ts messages we grab ts messages from the particular user who is requesting gas estimation
---------
Co-authored-by: Jiaying Wang <42981373+jennijuju@users.noreply.github.com>
Co-authored-by: Łukasz Magiera <magik6k@users.noreply.github.com>
Co-authored-by: Ubuntu <ubuntu@ip-10-0-4-29.us-east-2.compute.internal>
* Config default does not comment out EnableSplitstore
* Loadability check
* Remove test used for debugging
* regexp for properly safe check that config is set
* regexp for safely matching the EnableSpitstore field in the config
* Add instructions for undeleting config and remind users to set splitstore false for full archive
* UpdateConfig small docs and functional opts
* make gen
* Lint
* Fix
* nil pointer check on validate
* Unit testing of EnableSplitstore cases
* Address Review
---------
Co-authored-by: zenground0 <ZenGround0@users.noreply.github.com>
This change:
1. Introduces new "limited" API endpoints for EthGetTransactionByHash
and EthGetTransactionReceipt that accept lookback-limits.
2. Implements the gateway version of these API endpoints by calling the
limited variants with the default message search lookback limit.
fixes#10412
Instead:
1. Use the receipt from the message search.
2. Re-compute the gas fees that would have been charged.
fixes#10418
Co-authored-by: raulk <raul.kripalani@gmail.com>
After transitioning from using StateCompute to loading receipts,
we can no longer handle the 'pending' block without forcing
computation. Eth Core Devs are evaluating a proposal to remove
support on their end too.
Unfortunately, we need to execute the message twice to get this (unless
we want to change some APIs). But it's unlikely to be a performance
issue and will definitely help people debug failures.
* fix: eth: correctly decode EthGetStorageAt output
We cbor-encode it. Also:
1. Actually use the passed block param.
2. Check if the target actor is an EVM actor to avoid nonsense outputs.
fixes https://github.com/filecoin-project/ref-fvm/issues/1621
The improvements in the range-export code lead to avoid reading most blocks
twice, as well as to allowing some blocks to be written to disk multiple times.
The cache hit-rate went down from being close to 50% to a maximum of 12% at
the very end of the export. The reason is that most CIDs are never read twice
since they are correctly tracked in the CID set.
These numbers do not support the maintenance of the CachingBlockstore
code. Additional testing shows that removing it has similar memory-usage
behaviour and about 5 minute-faster execution (around 10%).
Less code to maintain and less options to mess up with.
This commit moderately refactors the ranged export code. It addresses several
problems:
* Code does not finish cleanly and things hang on ctrl-c
* Same block is read multiple times in a row (artificially increasing cached
blockstore metrics to 50%)
* It is unclear whether there are additional races (a single worker quits
when reaching height 0)
* CARs produced have duplicated blocks (~400k for an 80M-blocks CAR or
so). Some blocks appear up to 5 times.
* Using pointers for tasks where it is not necessary.
The changes:
* Use a FIFO instead of stack: simpler implementation as its own type. This
has not proven to be much more memory-friendly, but it has not made things
worse either.
* We avoid a probably not small amount of allocations by not using
unnecessary pointers.
* Fix duplicated blocks by atomically checking+adding to CID set.
* Context-termination now works correctly. Worker lifetime is correctly tracked and all channels
are closed, avoiding any memory leaks and deadlocks.
* We ensure all work is finished before finishing, something that might have
been broken in some edge cases previously. In practice, we would not have
seen this except perhaps in very early snapshots close to genesis.
Initial testing shows the code is currently about 5% faster. Resulting
snapshots do not have duplicates so they are a bit smaller. We have manually
verified that no CID is lost versus previous results, with both old and recent
snapshots.
This first commit contains the first and second implementation stabs (after
primary review by @hsanjuan), using a stack for task buffering.
Known issues: ctrl-c (context cancellation) results in the export code getting
deadlocked. Duplicate blocks in exports. Duplicate block reads from store.
Original commit messages:
works
works against mainnet and calibnet
feat: add internal export api method
- will hopfully make things faster by not streaming the export over the json rpc api
polish: better file nameing
fix: potential race in marking cids as seen
chore: improve logging
feat: front export with cache
fix: give hector a good channel buffer on this shit
docsgen
1. We do allow deploying with empty initcode.
2. Make sure that the encoded "code" is non-empty, if specified.
Basically, this makes everything consistent (and it's how I specified it
in the FIP).
We now enforce the following rules:
1. No duplicate topics or data.
2. Topics must have 32 byte keys.
3. Topics may not be skipped. (e.g., no t1 & t3 without a t2).
4. Raw codecs.
We _don't_ require that topics/data be emitted in any specific order.
We _skip_ events with unknown keys. We _drop_ events that violate the
above rules.
This:
1. Updates the builtin actors bundle (for actors v10).
2. Updates the event entry type to include the codec.
3. Removes the cbor encoding and zero trimming from event data.
I've chose to:
1. _Not_ add codec handling to the event filtering system for now.
2. _Skip_ events with unexpected codecs.
We don't actually _allow_ these events in the FVM right now, and it
simplifies the implementation.
However, I _am_ recording the codecs in the database so we don't have to
migrate it later.
- Event keys are now t1, t2, t3, t4 for topics; and d for data.
- ref-fvm no longer stores events in the blockstore for us. It just
returns events to the client, who is now responsible for handling
them as it wishes / according to its configuration.
- Add a flag to VMOpts to have the events AMT be written in the blockstore.
- Add a flag to the ChainStore to advertise to the rest of the system
if the ChainStore is storing events.
- Enable that flag if the EthRPC is enabled (can also add an explicit
configuration flag if wanted).
* Refactor: Unify EthTx to FilecoinMessage methods
* Filecoin messages can again be converted to Eth Txs
* All BLS messages should calculated tx hash with unsigned message
* Refactor newEthTxReceipt
* fill in from and to for non-eth transactions
* Hoist nil check out of newEthTxFromMessageLookup
---------
Co-authored-by: Aayush <arajasek94@gmail.com>
Co-authored-by: Raúl Kripalani <raul@protocol.ai>
