This is the second release candidate for the upcoming MANDATORY release of Lotus v1.16.0 that supports Filecoin network v16, codenamed the Skyr upgrade.
Filecoin nv16 upgrade will introduce non-programmable FVM(FVM m1) and switch the network from using go spec-actor to rust built-in actor. Full changelog will be published upon final release.
This release candidate sets mainnet upgrade at epoch 1044660, 2022-06-16T17:30:00Z. The bundle that the network will be using is v8.0.0, manifest CID will be included upon final release.
Your lotus node will switch from the Legacy VM (that depended on go-based specs-actors) to FVM (that uses Rust-based builtin-actors) atomically upon the upgrade.
This release candidate sets the caibration-net upgrade at epoch 1044660, 2022-06-16T17:30:00Z. The bundle that the network should be using is v8.0.0-rc.1(located at `build/actors/v8.tar.zst` ) upon migration, manifest CID `bafy2bzacedrdn6z3z7xz7lx4wll3tlgktirhllzqxb766dxpaqp3ukxsjfsba`.
As the network introduces FVM, it's also switching from spec-actor (written in GoLang) to [built-in actor](https://github.com/filecoin-project/builtin-actors) (written in rust), in which the latter comes with[ importable bundles](https://github.com/filecoin-project/builtin-actors#importable-bundle). This means, like filecoin proof parameters, node operators now also need to fetch the actor bundles according to the network versions for the nodes to remain operational.
In lotus [v1.16.0-rc2](https://github.com/filecoin-project/lotus/releases/tag/v1.16.0-rc1), the bundles for all networks(mainnet, calibnet, and etc) are included in the lotus source tree (`build/actors/`) and embedded on build.
Lotus verifies that the bundle CIDs are the right ones upon build & upgrade against the values in `build/builtin_actors_gen.go`, according to the network you are building. You may also check the bundle manifest CID matches the bundle gen-ed values by running `lotus state actor-cids --network-version 16`.
(We will get into the CIDs more in the next section).
As you may have noticed, all bundles are also available at https://github.com/filecoin-project/builtin-actors/releases, thus you can also manually download the bundles and place them in the right path.
Note: use customized bundle will risk you to lose sync with the network!
## Actor Code CIDs
If you have followed the conversation in FIP discussion[ _Does the switch of CodeCIDs to _real_ content-addressing impact you_](https://github.com/filecoin-project/FIPs/discussions/310) and [FIP-0031](https://github.com/filecoin-project/FIPs/blob/master/FIPS/fip-0031.md)- [structure of the code cid](https://github.com/filecoin-project/FIPs/blob/master/FIPS/fip-0031.md#structure-of-code-cids), you should already know that from nv16, system actor code CIDs will be real content-addressing instead of being a static string like `(fil/7/account)`/ `(fil/8/storageminer)`.
For lotus users, we are making the change minimal for you. This means the `CODE` output when you run `lotus state get-actor` will now be the actual CID that represents the executable code for the actor, followed by wrapped synthetic id like the ones you've got before, i.e `fil/8/system`.
Moreover, this also means that in the future, whenever the actor code changes, the CID will change accordingly, in which will result in a need for a network upgrade for the network participants to have consensus over what executable code we should use for each system actor.
### Execution Trace
For developers that are dependent on lotus execution trace, you will need to enable `LOTUS_VM_ENABLE_TRACING` envvar to get the exact execution trace response as before. Without the envvar enabled, `Duration` and `GasCharges` fields will be missing from the new FVM trace.
- fix: market: Infer index provider topic from network name by default ([filecoin-project/lotus#8526](https://github.com/filecoin-project/lotus/pull/8526))
- fix: storiface: Make FSOverhead numbers more accurate ([filecoin-project/lotus#8481](https://github.com/filecoin-project/lotus/pull/8481))
- fix: node: fix comment for IndexProvider ([filecoin-project/lotus#8480](https://github.com/filecoin-project/lotus/pull/8480))
- fix: sealing: fail to add expired precommits to a batch ([filecoin-project/lotus#8479](https://github.com/filecoin-project/lotus/pull/8479))
- fix:sealing:check index out of bounds against correct param length not return length ([filecoin-project/lotus#8475](https://github.com/filecoin-project/lotus/pull/8475))
- fix: sealing: Finalize snap sectors before submitting proofs ([filecoin-project/lotus#8582](https://github.com/filecoin-project/lotus/pull/8582))
This is a highly recommended feature lotus release v1.15.2. This feature release introduces many new features and for SPs, including PoSt workers, sealing scheduler, snap deal queue and so on.
‼️️Attention - the long-awaited yet highly requested PoSt workers, they are here! And they come in as a combo: you may setup PoSt workers for both winningPoSt or/and windowPoSt worker. You can also setup any number of PoSt workers as long as you have the hardware resources!
For more details and learn how to set it up, see the docs [here](https://lotus.filecoin.io/storage-providers/seal-workers/post-workers/). You can also find early result of the PoSt workers performance by the community [here](https://github.com/filecoin-project/lotus/discussions/8375).
- adjust `ParallelCheckLimit` according to your resource setup to get pre-post checkers run faster!
In addition, we also added some handy toolings:
- feat: miner: API/CLI to compute window-post ([filecoin-project/lotus#8389](https://github.com/filecoin-project/lotus/pull/8389))
- run `lotus-miner proving compute window-post` to manually trigger a full windowPoSt computation for a specific deadline for full sanity checks.
- feat: miner cli: Separate proving workers command ([filecoin-project/lotus#8379](https://github.com/filecoin-project/lotus/pull/8379))
- run `lotus-miner proving workers` to list all the PoSt workers that's attached
- feat: miner cli: proving check --faulty, faults in storage list sectors ([filecoin-project/lotus#8349](https://github.com/filecoin-project/lotus/pull/8349))
- run `lotus-miner proving check --faulty` to identify the sectors that might be bad.
### 🔥🔥🔥 Sealing Scheduler Enhancement 🔥🔥🔥
Have you ever got a couple workers but only a few of them are super packed, while the rest are idling waiting for jobs? Now the task can be distributed more evenly with:
The Filecoin Network introduced Snap Deal with the network v15 OhSnap upgrade, and lotus shipped v1.14.0 with basic snappy support for SP to use this feature. Since then, we have received good ux feedbacks and bug reports from the community, and we are introducing a couple enhancement for SPs to better leverage this feature.
- fix: sealing: always do cooldown in handleSubmitReplicaUpdateFailed ([filecoin-project/lotus#8353](https://github.com/filecoin-project/lotus/pull/8353))
- fix: storagefsm: Fix error loop on bad event ([filecoin-project/lotus#8338](https://github.com/filecoin-project/lotus/pull/8338))
- fix: sealing: Remove sector copies from workers after snapdeals ([filecoin-project/lotus#8329](https://github.com/filecoin-project/lotus/pull/8329))
## New Features
- enable rcmgr by default ([filecoin-project/lotus#8470](https://github.com/filecoin-project/lotus/pull/8470))
- feat: worker: check fd limit on startup ([filecoin-project/lotus#8390](https://github.com/filecoin-project/lotus/pull/8390))
- feat: lotus-shed: add command to compute state over a range of tipsets. ([filecoin-project/lotus#8371](https://github.com/filecoin-project/lotus/pull/8371))
- sealing: Don't panic in ReleaseUnsealed with no ranges ([filecoin-project/lotus#8461](https://github.com/filecoin-project/lotus/pull/8461))
- testkit: give up on waiting for the RPC server to shutdown after 1s ([filecoin-project/lotus#8450](https://github.com/filecoin-project/lotus/pull/8450))
- fix: FVM: add finality check for consensus faults ([filecoin-project/lotus#8452](https://github.com/filecoin-project/lotus/pull/8452))
- fix: market: Reuse the market `PubSub` in index provider ([filecoin-project/lotus#8443](https://github.com/filecoin-project/lotus/pull/8443))
- fix: market: set all index provider options based on lotus config ([filecoin-project/lotus#8444](https://github.com/filecoin-project/lotus/pull/8444))
- release worker tracker lock when call cb func ([filecoin-project/lotus#8206](https://github.com/filecoin-project/lotus/pull/8206))
- fix: multisig: Print "waiting for confirmation.." ([filecoin-project/lotus#8368](https://github.com/filecoin-project/lotus/pull/8368))
- fix: lotus-wallet: pass correct repo type to repo.Init ([filecoin-project/lotus#8356](https://github.com/filecoin-project/lotus/pull/8356))
- fix: avoid racy memstores when estimating gas ([filecoin-project/lotus#8351](https://github.com/filecoin-project/lotus/pull/8351))
- fix: itests: Don't hang on exit in MineBlocksMustPost ([filecoin-project/lotus#8345](https://github.com/filecoin-project/lotus/pull/8345))
- fix: miner cli: Estimate deal weight in sector list when upgrading ([filecoin-project/lotus#8336](https://github.com/filecoin-project/lotus/pull/8336))
- fix: sealing: FinalizeSector doesn't need sealed replica access ([filecoin-project/lotus#8337](https://github.com/filecoin-project/lotus/pull/8337))
- fix: cli: add ArgsUsage field to clientGetDealCmd ([filecoin-project/lotus#8241](https://github.com/filecoin-project/lotus/pull/8241))
- deps: ffi: pull ffi that includes the latest fvm ([filecoin-project/lotus#8424](https://github.com/filecoin-project/lotus/pull/8424))
- Update to go-log 2.5.1 ([filecoin-project/lotus#8422](https://github.com/filecoin-project/lotus/pull/8422))
- chore(deps): update go-data-transfer with fixes (master edition) ([filecoin-project/lotus#8411](https://github.com/filecoin-project/lotus/pull/8411))
- deps: update ffi with actor v7.1.0 and fvm that uses the bundle that includes the new manifest ([filecoin-project/lotus#8402](https://github.com/filecoin-project/lotus/pull/8402))
- Update to specs-storage v0.2.2 ([filecoin-project/lotus#8400](https://github.com/filecoin-project/lotus/pull/8400))
- chore: ffi: the latest fvm release ([filecoin-project/lotus#8381](https://github.com/filecoin-project/lotus/pull/8381))
- Update params for interopnet for fvm ([filecoin-project/lotus#8119](https://github.com/filecoin-project/lotus/pull/8119))
This is a *HIGHLY recommended* feature release v1.15.1, especially for node operators and storage providers who want to be a part of the content addressing network of Filecoin and IPFS.
This feature release introduces Index Provider, GraphSync v2, and many other latest functionalities, improvements and bug fixes. More importantly, node operator can now enable the FVM(experimental) to sync mainnet!!
The lotus team is excited to announce the launch of experimental non-programmable FVM on mainnet. By enabling `"LOTUS_USE_FVM_EXPERIMENTAL=1` envvar, the lotus daemon will be running the [WASM-compiled built-in actors](https://github.com/filecoin-project/builtin-actors) that is compatible with the existing chain(Network v15 OhSnap). If you are trying it out and having any questions or feedbacks, please leave a comment [here](https://github.com/filecoin-project/lotus/discussions/8334)!
- feat: markets: Integrate index ingest protocol and retrieve by any CID ([filecoin-project/lotus#7313](https://github.com/filecoin-project/lotus/pull/7313))
More and more useful data is being stored on Filecoin via deals made by clients to Storage Providers. The goal is that this content is discoverable when people need them. To achieve that goal, one of the projects [the Bedrock team](https://www.notion.so/pl-strflt/Bedrock-2e956d5d8143432080a1d84435ccf0ff) is working on is building an Indexer Ecosystem, a project that's focus on content addressing on Filecoin, then potentially have interoperability with IPFS in the future and eventually serve the retrieval market. The Indexer Ecosystem high level architecture overview diagram can be found [here](https://github.com/filecoin-project/storetheindex/blob/main/doc/indexer_ecosys.png) and a detailed write up about can be found [here](https://www.notion.so/pl-strflt/Introducing-Indexer-to-SP-90bf296794174a8281c121d4ce6747a0).
That being said, with this release, lotus Storage Providers can easily become an Index Provider and serve the Indexer Content Addressing System. Index Providers generate advertisements from the deals made by a storage provider and announces the data to the indexer nodes for further processing:
- To learn more about *what is an Index Provider and how to be an Index Provider*, read it [here](https://lotus.filecoin.io/storage-providers/operate/index-provider/) in lotus docuementation.
- An [one-off migration](https://lotus.filecoin.io/storage-providers/operate/index-provider/#first-time-migration) is needed in order for a Storage Provider to become an Index Provider and announce the proper formatted index. It's *highly recommended* for all Index Provider to do a [force bulk initialization](https://lotus.filecoin.io/storage-providers/configure/dagstore/#forcing-bulk-initialization) to enable index announcement on all existing deals.
- Note that the Initialization places IO workload on your storage system. SP should set a proper `concurrency` based on your hardware or can stop/start initialization at their wish/convenience as proving deadlines approach and elapse, to avoid IOPS starvation or competition with window PoSt.
We recommend all Storage Providers that are serving deals in the Filecoin network to become a Index Provider, make the data you are storing discoverable for the retrieval market and retrieval clients!
- If you have any questions about becoming an index provider, or the indexer system in general, leave a comment [here](https://github.com/filecoin-project/lotus/discussions/8341).
- Follow the indexer project at https://github.com/filecoin-project/go-indexer-core.
- If you have any feature request or bug reports of running an index provider, create an issue in https://github.com/filecoin-project/index-provider.
- You may also join the #storetheindex channel in the Filecoin Slack to engage with the team & the community!
### ❗️❗️❗️ Dag Migration For New CAR index format in DagStore ❗️❗️❗️
The index provider leverages the latest CARv2 indexing format `MultihashIndexSorted`, which stores the multihash code as well as the digest of all CIDs in a CAR file. Thus, all Storage Providers SHOULD perform an one-off DAG mirgation to regenerate DagStore CARv2 indices. You have to do it to become an index provider, failing to do so may also impact your future deal making.
- test: chain: unit tests for the syncer & sync manager ([filecoin-project/lotus#8072](https://github.com/filecoin-project/lotus/pull/8072))
- test: cli: unit tests for sync related commands ([filecoin-project/lotus#8080](https://github.com/filecoin-project/lotus/pull/8080))
- misc: wallet: wallet tests with annotations for system test matrix ([filecoin-project/lotus#7928](https://github.com/filecoin-project/lotus/pull/7928))
- feat: config: Move MakeNewSectorForDeals config into the Sealing section([filecoin-project/lotus#8382](https://github.com/filecoin-project/lotus/pull/8382))
- fix: sealing: Remove sector copies from workers after snapdeals ([filecoin-project/lotus#8331](https://github.com/filecoin-project/lotus/pull/8331))
- fix: storagefsm: Fix error loop on bad event ([filecoin-project/lotus#8339](https://github.com/filecoin-project/lotus/pull/8339))
- fix: sealing: FinalizeSector doesn't need sealed replica access ([filecoin-project/lotus#8339](https://github.com/filecoin-project/lotus/pull/8339))
- fix: sealing: always do cooldown in handleSubmitReplicaUpdateFailed ([filecoin-project/lotus#8353](https://github.com/filecoin-project/lotus/pull/8353))
- fix: piece provider: Don't log CIDs as binary ([filecoin-project/lotus#8287](https://github.com/filecoin-project/lotus/pull/8287))
- fix:sealing:Log instead of error normal shutdown of state machine ([filecoin-project/lotus#8232](https://github.com/filecoin-project/lotus/pull/8232))
- fix:sealing:Handle finalize replica update failures in fsm ([filecoin-project/lotus#8229](https://github.com/filecoin-project/lotus/pull/8229))
- ci: appimage: re-install appimage CI ([filecoin-project/lotus#7943](https://github.com/filecoin-project/lotus/pull/7943))
- fix: client: calculate commps for pieces bigger than 32GB ([filecoin-project/lotus#8179](https://github.com/filecoin-project/lotus/pull/8179))
- fix:cli:Continue instead of return error if no valid value is filled ([filecoin-project/lotus#8131](https://github.com/filecoin-project/lotus/pull/8131))
- fix: state: Allow lotus-miner info to complete without admin permission ([filecoin-project/lotus#8057](https://github.com/filecoin-project/lotus/pull/8057))
- fix:paychan:deflake integration test ([filecoin-project/lotus#8088](https://github.com/filecoin-project/lotus/pull/8088))
- [Describe]: when excute cmd "lotus-bench sealing" without "benchmark-… ([filecoin-project/lotus#8173](https://github.com/filecoin-project/lotus/pull/8173))
## Dependency Updates
- deps: update go-libp2p and go-libp2p-resource-manager ([filecoin-project/lotus#8289](https://github.com/filecoin-project/lotus/pull/8289))
- feat(deps): update to graphsync v0.13.0 with 2.0 protocol ([filecoin-project/lotus#8273](https://github.com/filecoin-project/lotus/pull/8273))
- dep: actor: get v7 ([filecoin-project/lotus#8194](https://github.com/filecoin-project/lotus/pull/8194))
This is an optional release with retrieval improvements(client side), SP ux with unsealing, snap deals and regular deal making and many other new features, improvements and bug fixes.
## Highlights
- feat:sealing: StartEpochSealingBuffer triggers packing on time([filecoin-project/lotus#7905](https://github.com/filecoin-project/lotus/pull/7905))
- use the `StartEpochSealingBuffer` configuration variable as a way to enforce that sectors are packed for sealing / updating no matter how many deals they have if the nearest deal start date is close enough to the present.
- feat(graphsync): allow setting of per-peer incoming requests for miners ([filecoin-project/lotus#7578](https://github.com/filecoin-project/lotus/pull/7578))
- by setting `SimultaneousTransfersForStoragePerClient` in deal making configuration.
- Make retrieval even faster ([filecoin-project/lotus#7746](https://github.com/filecoin-project/lotus/pull/7746))
- feat: #7747 sealing: Adding conf variable for capping number of concurrent unsealing jobs (#7884) ([filecoin-project/lotus#7884](https://github.com/filecoin-project/lotus/pull/7884))
- by setting `MaxConcurrentUnseals` in `DAGStoreConfig`
- feat: mpool: Cache state nonces ([filecoin-project/lotus#8005](https://github.com/filecoin-project/lotus/pull/8005))
- chore: build: make the OhSnap epoch configurable by an envvar for devnets ([filecoin-project/lotus#7995](https://github.com/filecoin-project/lotus/pull/7995))
- Shed: Add a util to send a batch of messages ([filecoin-project/lotus#7667](https://github.com/filecoin-project/lotus/pull/7667))
- Add api for transfer diagnostics ([filecoin-project/lotus#7759](https://github.com/filecoin-project/lotus/pull/7759))
- Shed: Add a util to list terminated deals ([filecoin-project/lotus#7774](https://github.com/filecoin-project/lotus/pull/7774))
- Expose EnableGasTracing as an env_var ([filecoin-project/lotus#7750](https://github.com/filecoin-project/lotus/pull/7750))
- Command to list active sector locks ([filecoin-project/lotus#7735](https://github.com/filecoin-project/lotus/pull/7735))
- Initial switch to OpenTelemetry ([filecoin-project/lotus#7725](https://github.com/filecoin-project/lotus/pull/7725))
- fix:snap: pay for the collateral difference needed if the miner available balance is insufficient ([filecoin-project/lotus#8234](https://github.com/filecoin-project/lotus/pull/8234))
- Fix: chain: create a new VM for each epoch ([filecoin-project/lotus#7966](https://github.com/filecoin-project/lotus/pull/7966))
- fix: doc generation struct slice example value ([filecoin-project/lotus#7851](https://github.com/filecoin-project/lotus/pull/7851))
- fix: returned error not be accept correctly ([filecoin-project/lotus#7852](https://github.com/filecoin-project/lotus/pull/7852))
- fix: #7577 markets: When retrying Add Piece, first seek to start of reader ([filecoin-project/lotus#7812](https://github.com/filecoin-project/lotus/pull/7812))
- misc: n/a sealing: Fix grammatical error in a log warning message ([filecoin-project/lotus#7831](https://github.com/filecoin-project/lotus/pull/7831))
- sectors update-state checks if sector exists before changing its state ([filecoin-project/lotus#7762](https://github.com/filecoin-project/lotus/pull/7762))
- SplitStore: supress compaction near upgrades ([filecoin-project/lotus#7734](https://github.com/filecoin-project/lotus/pull/7734))
This is an **optional** release of lotus, that's had a couple more improvements w.r.t Snap experience for storage providers in preparation of the[upcoming OhSnap upgrade](https://github.com/filecoin-project/community/discussions/74?sort=new#discussioncomment-1922550).
Note that the network is STILL scheduled to upgrade to v15 on March 1st at 2022-03-01T15:00:00Z. All node operators, including storage providers, must upgrade to at least Lotus v1.14.0 before that time. Storage providers must update their daemons, miners, and worker(s).
This is an **optional** release of lotus, that fixes the incorrect *comment* of network v15 OhSnap upgrade **date**. Note the actual upgrade epoch in [v1.14.0](https://github.com/filecoin-project/lotus/releases/tag/v1.14.0) was correct.
The network is scheduled to upgrade to v15 on March 1st at 2022-03-01T15:00:00Z. All node operators, including storage providers, must upgrade to this release (or a later release) before that time. Storage providers must update their daemons, miners, and worker(s).
The OhSnap upgrade introduces the following FIPs, delivered in [actors v7](https://github.com/filecoin-project/specs-actors/releases/tag/v7.0.0):
All node operators, including storage providers, should be aware that a pre-migration will begin at 2022-03-01T13:30:00Z (90 minutes before the real upgrade). The pre-migration will take between 20 and 50 minutes, depending on hardware specs. During this time, expect slower block validation times, increased CPU and memory usage, and longer delays for API queries.
- feat: #7880 gas: add gas charge for VerifyReplicaUpdate ([#7897](https://github.com/filecoin-project/lotus/pull/7897))
- enhancement: sectors: disable existing cc upgrade path 2 days before the upgrade epoch ([#7900](https://github.com/filecoin-project/lotus/pull/7900))
- updating to new datastore/blockstore code with contexts ([#7646](https://github.com/filecoin-project/lotus/pull/7646))
- reorder transfer checks so as to ensure sending 2B FIL to yourself fails if you don't have that amount ([#7637](https://github.com/filecoin-project/lotus/pull/7637))
- Testing result with MinerX.3 shows the retrieval deal success rate has increased dramatically with faster transfer
speed, you can join or follow along furthur performance testings [here](https://github.com/filecoin-project/lotus/discussions/7874). We recommend application developers to integrate with the new
-`lotus client ls`: retrieve and list desired object links
-`lotus client cat`: retrieve and print the data from the network
- 🌟🌟 The monolith `ClientRetrieve` method was broken into:
-`ClientRetrieve` which retrieves data into the local repo (or into an IPFS node if ipfs integration is enabled)
-`ClientRetrieveWait` which will wait for the retrieval to complete
-`ClientExport` which will export data from the local node
- Note: this change only applies to v1 API. v0 API remains unchanged.
- 🌟 Support for full ipld selectors was added (for example making it possible to only retrieve list of directories in a deal, without fetching any file data)
- To learn more, see [here](https://github.com/filecoin-project/lotus/blob/0523c946f984b22b3f5de8cc3003cc791389527e/api/types.go#L230-L264)
- Storage groups allow for better control of data flow between workers, for example, it makes it possible to define that data from PC1 on a given worker has to have it's PC2 step executed on the same worker
- To set it up, follow the instructions under the `Sector Storage Group` section [here](https://lotus.filecoin.io/docs/storage-providers/seal-workers/#lotus-worker-co-location)
Lotus v1.13.0 is a *highly recommended* feature release for all lotus users(i.e: storage providers, data brokers, application developers and so on) that supports the upcoming
This feature release includes the latest functionalities and improvements, like data transfer rate-limiting for both storage and retrieval deals, proof v10 with CUDA support, etc. You can find more details in the Changelog below.
-`SimultaneousTransfer` is now replaced by `SimultaneousTransfersForStorage` and `SimultaneousTransfersForRetrieval`, where users may set the amount of ongoing data transfer for storage and retrieval deals in parallel separately. The default value for both is set to 20.
- If you are using the lotus client, these two configuration variables are under the `Client` section in `./lotus/config.toml`.
- If you are a service provider, these two configuration variables should be set under the `Dealmaking` section in `/.lotusminer/config.toml`.
- This version supports CUDA. To enable CUDA instead of openCL, build lotus with `FFI_USE_CUDA=1 FFI_BUILD_FROM_SOURCE=1 ...`.
- You can find additional Nvidia driver installation instructions written by MinerX fellows [here](https://github.com/filecoin-project/lotus/discussions/7443#discussioncomment-1425274) and perf improvements result on PC2/C2/WindowPoSt computation on different profiles [here](https://github.com/filecoin-project/lotus/discussions/7443), most people observe a 30-50% decrease in computation time.
- This introduces a new RetrievalOrder-struct field and a CLI option that takes a string representation as understood by [https://pkg.go.dev/github.com/ipld/go-ipld-selector-text-lite#SelectorSpecFromPath](https://pkg.go.dev/github.com/ipld/go-ipld-selector-text-lite#SelectorSpecFromPath). This allows for partial retrieval of any sub-DAG of a deal provided the user knows the exact low-level shape of the deal contents.
- For example, to retrieve the first entry of a UnixFS directory by executing, run `lotus client retrieve --miner f0XXXXX --datamodel-path-selector 'Links/0/Hash' bafyROOTCID ~/output`
- You can now find supported env vars in [default-lotus-miner-config.toml](https://github.com/filecoin-project/lotus/blob/master/documentation/en/default-lotus-miner-config.toml).
- Miner CLI: Allow trying to change owners of any miner actor ([filecoin-project/lotus#7328](https://github.com/filecoin-project/lotus/pull/7328))
- Add --unproven flag to the sectors list command ([filecoin-project/lotus#7308](https://github.com/filecoin-project/lotus/pull/7308))
## Improvements
- check for deal start epoch on SectorAddPieceToAny ([filecoin-project/lotus#7407](https://github.com/filecoin-project/lotus/pull/7407))
- Verify Voucher locks in VoucherValidUnlocked ([filecoin-project/lotus#5609](https://github.com/filecoin-project/lotus/pull/5609))
- Add more info to miner allinfo command ([filecoin-project/lotus#7384](https://github.com/filecoin-project/lotus/pull/7384))
- add `lotus-miner storage-deals list --format=json` with transfers ([filecoin-project/lotus#7312](https://github.com/filecoin-project/lotus/pull/7312))
This is a mandatory release of Lotus that introduces [Filecoin Network v14](https://github.com/filecoin-project/community/discussions/74#discussioncomment-1398542), codenamed the Chocolate upgrade. The Filecoin mainnet will upgrade at epoch 1231620, on 2021-10-26T13:30:00Z.
- [FIP-0026](https://github.com/filecoin-project/FIPs/blob/master/FIPS/fip-0026.md): Extend sector faulty period from 2 weeks to 6 weeks
Note that this release is built on top of lotus v1.11.3. Enterprising users like storage providers, data brokers and others are recommended to use lotus v1.13.0 for latest new features, improvements and bug fixes.
- Implement and support [FIP-0024](https://github.com/filecoin-project/FIPs/blob/master/FIPS/fip-0024.md) BatchBalancer & BatchDiscount Post-HyperDrive Adjustment:
- Extend FaultMaxAge to 6 weeks for actors v6 on test networks only ([filecoin-project/lotus#7421](https://github.com/filecoin-project/lotus/pull/7421))
- 🌟🌟Introduce `MaxStagingDealsBytes - reject new deals if our staging deals area is full ([filecoin-project/lotus#7276](https://github.com/filecoin-project/lotus/pull/7276))
- Set `MaxStagingDealsBytes` under the [Dealmaking] section of the markets' subsystem's `config.toml` to reject new incoming deals when the `deal-staging` directory of market subsystem's repo gets too large.
- Catch deal slashed because sector was terminated ([filecoin-project/lotus#7201](https://github.com/filecoin-project/lotus/pull/7201))
- Insert miner and network power data as gibibytes to avoid int64 overflows ([filecoin-project/lotus#7194](https://github.com/filecoin-project/lotus/pull/7194))
- sealing: Check piece CIDs after AddPiece ([filecoin-project/lotus#7185](https://github.com/filecoin-project/lotus/pull/7185))
- markets: OnDealExpiredOrSlashed - get deal by proposal instead of deal ID ([filecoin-project/lotus#5431](https://github.com/filecoin-project/lotus/pull/5431))
- Incoming: improve a log message ([filecoin-project/lotus#7181](https://github.com/filecoin-project/lotus/pull/7181))
- journal: make current log file have a fixed named (#7112) ([filecoin-project/lotus#7112](https://github.com/filecoin-project/lotus/pull/7112))
- call string.Repeat always with positive int ([filecoin-project/lotus#7104](https://github. com/filecoin-project/lotus/pull/7104))
- itests: support larger sector sizes; add large deal test. ([filecoin-project/lotus#7148](https://github.com/filecoin-project/lotus/pull/7148))
The dagstore also leverages the indexing features of [CARv2](https://github.com/ipld/ipld/blob/master/specs/transport/car/carv2/index.md) to enable plan CAR files to act as read and write
blockstores, which are served as the direct medium for data exchanges in markets for both storage and retrieval
- In the future, lotus will leverage and interact with Dagstore a lot for new features and improvements for deal
making, therefore, it's highly recommended to lotus users to go through [Lotus Miner: About the markets dagstore](https://docs.filecoin.io/mine/lotus/dagstore/#conceptual-overview) thoroughly to learn more about Dagstore's
- When you first start your lotus-miner or market subsystem with this release, a one-time/first-time **dagstore migration** will be triggered which replaces the former Badger staging blockstore with dagstore. We highly
are still transferring**, using the `lotus-miner data-transfers cancel` command before upgrade your market nodes. Reason being that the new dagstore changes attributes in the internal deal state objects, and the paths to the staging CARs where the deal data was being placed will be lost.
and retrieval service. We'd suggest you to start [forced bulk initialization] soon if possible as this process
places relatively high IP workload on your storage system and is better to be carried out gradually and over a
longer timeframe. Read how to do properly perform a force bulk initialization [here](https://docs.filecoin.io/mine/lotus/dagstore/#forcing-bulk-initialization).
- 💙 **Special thanks to [MinerX fellows for testing and providing valuable feedbacks](https://github.com/filecoin-project/lotus/discussions/6852) for Dagstore in the past month!**
- improve get api error messages ([filecoin-project/lotus#7088](https://github.com/filecoin-project/lotus/pull/7088))
- Strict major minor version checking on v0 and v1 apis ([filecoin-project/lotus#7038](https://github.com/filecoin-project/lotus/pull/7038))
- make lotus-miner net commands hit markets subsystem. ([filecoin-project/lotus#7042](https://github.com/filecoin-project/lotus/pull/7042))
- Test with latest actors version ([filecoin-project/lotus#6998](https://github.com/filecoin-project/lotus/pull/6998))
- Reduce splitstore memory usage during chain walks ([filecoin-project/lotus#6949](https://github.com/filecoin-project/lotus/pull/6949))
- Remove forgotten non-functioning config from the pre-mainnet days ([filecoin-project/lotus#6970](https://github.com/filecoin-project/lotus/pull/6970))
- add explicit error msg if repo dir does not exist ([filecoin-project/lotus#6909](https://github.com/filecoin-project/lotus/pull/6909))
- reasonable max value for initial sector expiration ([filecoin-project/lotus#6099](https://github.com/filecoin-project/lotus/pull/6099))
- support MARKETS_API_INFO env var, and markets-repo, markets-api-url CLI flags. ([filecoin-project/lotus#6936](https://github.com/filecoin-project/lotus/pull/6936))
- Improve formatting of workers CLI ([filecoin-project/lotus#6942](https://github.com/filecoin-project/lotus/pull/6942))
- make: set default GOCC earlier ([filecoin-project/lotus#6932](https://github.com/filecoin-project/lotus/pull/6932))
- Log more call context during errors ([filecoin-project/lotus#6918](https://github.com/filecoin-project/lotus/pull/6918))
- polish(errors): better state tree errors ([filecoin-project/lotus#6923](https://github.com/filecoin-project/lotus/pull/6923))
- adding an RuntimeSubsystems API to storage miner; fix `lotus-miner info` ([filecoin-project/lotus#6906](https://github.com/filecoin-project/lotus/pull/6906))
- Reduce entropy in the chain package ([filecoin-project/lotus#6889](https://github.com/filecoin-project/lotus/pull/6889))
- make: Allow setting Go compiler with GOCC ([filecoin-project/lotus#6911](https://github.com/filecoin-project/lotus/pull/6911))
## Bug Fixes
- sealing: Fix RecoverDealIDs loop with changed PieceCID ([filecoin-project/lotus#7117](https://github.com/filecoin-project/lotus/pull/7117))
- Fix error handling in SectorAddPieceToAny api impl ([filecoin-project/lotus#7135](https://github.com/filecoin-project/lotus/pull/7135))
- add rice box to required binaries ([filecoin-project/lotus#7125](https://github.com/filecoin-project/lotus/pull/7125))
- fix bug in MpoolPending message exclusion ([filecoin-project/lotus#6945](https://github.com/filecoin-project/lotus/pull/6945))
- PreCommitPolicy: Don't try to align expirations on proving period boundaries ([filecoin-project/lotus#7018](https://github.com/filecoin-project/lotus/pull/7018))
- make: fix version check when using gotip ([filecoin-project/lotus#6916](https://github.com/filecoin-project/lotus/pull/6916))
This is a **highly recommended** but optional Lotus v1.11.1 release that introduces many deal making and datastore improvements and new features along with other bug fixes.
- ⭐️⭐️⭐️[**lotus-miner market subsystem**](https://docs.filecoin.io/mine/lotus/split-markets-miners/#frontmatter-title) is introduced in this release! It is **highly recommended** for storage providers to run markets processes on a separate machine! Doing so, only this machine needs to exposes public ports for deal making. This also means that the other miner operations can now be completely isolated by from the deal making processes and storage providers can stop and restarts the markets process without affecting an ongoing Winning/Window PoSt!
- More details on the concepts, architecture and how to split the market process can be found [here](https://docs.filecoin.io/mine/lotus/split-markets-miners/#concepts).
- Base on your system setup(running on separate machines, same machine and so on), please see the suggested practice by community members [here](https://github.com/filecoin-project/lotus/discussions/7047#discussion-3515335).
- Note: if you are running lotus-worker on a different machine, you will need to set `MARKETS_API_INFO` for certain CLI to work properly. This will be improved by #7072.
- Huge thanks to MinerX fellows for [helping testing the implementation, reporting the issues so they were fixed by now and providing feedbacks](https://github.com/filecoin-project/lotus/discussions/6861) to user docs in the past three weeks!
- Better control your sector collateral payment by setting `CollateralFromMinerBalance`, `AvailableBalanceBuffer` and `DisableCollateralFallback`.
-`CollateralFromMinerBalance`: whether to use available miner balance for sector collateral instead of sending it with each message, default is `false`.
-`AvailableBalanceBuffer`: minimum available balance to keep in the miner actor before sending it with messages, default is 0FIL.
-`DisableCollateralFallback`: whether to send collateral with messages even if there is no available balance in the miner actor, default is `false`.
- Config for deal publishing control addresses ([filecoin-project/lotus#6697](https://github.com/filecoin-project/lotus/pull/6697))
- Set `DealPublishControl` to set the wallet used for sending `PublishStorageDeals` messages, instructions [here](https://docs.filecoin.io/mine/lotus/miner-addresses/#control-addresses).
- ⭐️⭐️⭐️ Support standalone miner-market process ([filecoin-project/lotus#6356](https://github.com/filecoin-project/lotus/pull/6356))
- **⭐️⭐️ Experimental** [Splitstore]((https://github.com/filecoin-project/lotus/blob/master/blockstore/splitstore/README.md)) (more details coming in v1.11.2! Stay tuned! Join the discussion [here](https://github.com/filecoin-project/lotus/discussions/5788) if you have questions!) :
- Splitstore: add retention policy option for keeping messages in the hotstore ([filecoin-project/lotus#6775](https://github.com/filecoin-project/lotus/pull/6775))
- Introduce the LOTUS_CHAIN_BADGERSTORE_DISABLE_FSYNC envvar ([filecoin-project/lotus#6817](https://github.com/filecoin-project/lotus/pull/6817))
- Splitstore: add support for protecting out of chain references in the blockstore ([filecoin-project/lotus#6777](https://github.com/filecoin-project/lotus/pull/6777))
- Fix padding of deals, which only partially shipped in #5988 ([filecoin-project/lotus#6683](https://github.com/filecoin-project/lotus/pull/6683))
- fix deal concurrency test failures by upgrading graphsync and others ([filecoin-project/lotus#6724](https://github.com/filecoin-project/lotus/pull/6724))
- fix: on randomness change, use new rand ([filecoin-project/lotus#6805](https://github.com/filecoin-project/lotus/pull/6805)) - fix: always check if StateSearchMessage returns nil ([filecoin-project/lotus#6802](https://github.com/filecoin-project/lotus/pull/6802))
- test: fix flaky window post tests ([filecoin-project/lotus#6804](https://github.com/filecoin-project/lotus/pull/6804))
- wrap close(wait) with sync.Once to avoid panic ([filecoin-project/lotus#6800](https://github.com/filecoin-project/lotus/pull/6800))
- ClientRetrieve stops on cancel([filecoin-project/lotus#6739](https://github.com/filecoin-project/lotus/pull/6739))
- Fix bugs in sectors extend --v1-sectors ([filecoin-project/lotus#6066](https://github.com/filecoin-project/lotus/pull/6066))
- fix "lotus-seed genesis car" error "merkledag: not found" ([filecoin-project/lotus#6688](https://github.com/filecoin-project/lotus/pull/6688))
- Get retrieval pricing input should not error out on a deal state fetch ([filecoin-project/lotus#6679](https://github.com/filecoin-project/lotus/pull/6679))
- Fix more CID double-encoding as hex ([filecoin-project/lotus#6680](https://github.com/filecoin-project/lotus/pull/6680))
- storage: Fix FinalizeSector with sectors in stoage paths ([filecoin-project/lotus#6653](https://github.com/filecoin-project/lotus/pull/6653))
- Fix tiny error in check-client-datacap ([filecoin-project/lotus#6664](https://github.com/filecoin-project/lotus/pull/6664))
- Fix: precommit_batch method used the wrong cfg.CommitBatchWait ([filecoin-project/lotus#6658](https://github.com/filecoin-project/lotus/pull/6658))
- ValidateBlock: Assert that block header height's are greater than parents ([filecoin-project/lotus#6872](https://github.com/filecoin-project/lotus/pull/6872))
- feat: Don't panic when api impl is nil ([filecoin-project/lotus#6857](https://github.com/filecoin-project/lotus/pull/6857))
- easy way to make install app ([filecoin-project/lotus#5183](https://github.com/filecoin-project/lotus/pull/5183))
- api: Separate the Net interface from Common ([filecoin-project/lotus#6627](https://github.com/filecoin-project/lotus/pull/6627)) - add StateReadState to gateway api ([filecoin-project/lotus#6818](https://github.com/filecoin-project/lotus/pull/6818))
- add SealProof in SectorBuilder ([filecoin-project/lotus#6815](https://github.com/filecoin-project/lotus/pull/6815))
- sealing: Handle preCommitParams errors more correctly ([filecoin-project/lotus#6763](https://github.com/filecoin-project/lotus/pull/6763))
- ClientFindData: always fetch peer id from chain ([filecoin-project/lotus#6807](https://github.com/filecoin-project/lotus/pull/6807))
- test: handle null blocks in TestForkRefuseCall ([filecoin-project/lotus#6758](https://github.com/filecoin-project/lotus/pull/6758))
- Add more deal details to lotus-miner info ([filecoin-project/lotus#6708](https://github.com/filecoin-project/lotus/pull/6708))
- polish(statetree): accept a context in statetree diff for timeouts ([filecoin-project/lotus#6639](https://github.com/filecoin-project/lotus/pull/6639))
- Add helptext to lotus chain export ([filecoin-project/lotus#6672](https://github.com/filecoin-project/lotus/pull/6672))
- add an incremental nonce itest. ([filecoin-project/lotus#6663](https://github.com/filecoin-project/lotus/pull/6663))
- commit batch: Initialize the FailedSectors map ([filecoin-project/lotus#6647](https://github.com/filecoin-project/lotus/pull/6647))
- Fast-path retry submitting commit aggregate if commit is still valid ([filecoin-project/lotus#6638](https://github.com/filecoin-project/lotus/pull/6638))
- Reuse timers in sealing batch logic ([filecoin-project/lotus#6636](https://github.com/filecoin-project/lotus/pull/6636))
- Set `SimultaneousTransfers` in lotus miner config to configure the maximum number of parallel online data transfers, including both storage and retrieval deals.
- Fix CircleCI gen ([filecoin-project/lotus#6589](https://github.com/filecoin-project/lotus/pull/6589))
- Make query-ask CLI more graceful ([filecoin-project/lotus#6590](https://github.com/filecoin-project/lotus/pull/6590))
- scale up sector expiration to avoid sector expire in batch-pre-commit waitting ([filecoin-project/lotus#6566](https://github.com/filecoin-project/lotus/pull/6566))
- Fix an error in msigLockCancel ([filecoin-project/lotus#6582](https://github.com/filecoin-project/lotus/pull/6582)
- gateway: Add support for Version method ([filecoin-project/lotus#6618](https://github.com/filecoin-project/lotus/pull/6618))
- revamped integration test kit (aka. Operation Sparks Joy) ([filecoin-project/lotus#6329](https://github.com/filecoin-project/lotus/pull/6329))
- move with changed name ([filecoin-project/lotus#6587](https://github.com/filecoin-project/lotus/pull/6587))
- dynamic circleci config for streamlining test execution ([filecoin-project/lotus#6561](https://github.com/filecoin-project/lotus/pull/6561))
- extern/storage: add ability to ignore worker resources when scheduling. ([filecoin-project/lotus#6542](https://github.com/filecoin-project/lotus/pull/6542))
- Adjust various CLI display ratios to arbitrary precision ([filecoin-project/lotus#6309](https://github.com/filecoin-project/lotus/pull/6309))
- Test multicore SDR support ([filecoin-project/lotus#6479](https://github.com/filecoin-project/lotus/pull/6479))
- Unit tests for sector batchers ([filecoin-project/lotus#6432](https://github.com/filecoin-project/lotus/pull/6432))
- Update chain list with correct help instructions ([filecoin-project/lotus#6465](https://github.com/filecoin-project/lotus/pull/6465))
- clean failed sectors in batch commit ([filecoin-project/lotus#6451](https://github.com/filecoin-project/lotus/pull/6451))
- itests/kit: add guard to ensure imports from tests only. ([filecoin-project/lotus#6445](https://github.com/filecoin-project/lotus/pull/6445))
- consolidate integration tests into `itests` package; create test kit; cleanup ([filecoin-project/lotus#6311](https://github.com/filecoin-project/lotus/pull/6311))
- Fee config for sector batching ([filecoin-project/lotus#6420](https://github.com/filecoin-project/lotus/pull/6420))
- UX: lotus state power CLI should fail if called with a not-miner ([filecoin-project/lotus#6425](https://github.com/filecoin-project/lotus/pull/6425))
- attempt to do better padding on pieces being written into sectors ([filecoin-project/lotus#5988](https://github.com/filecoin-project/lotus/pull/5988))
- remove duplicate ask and calculate ping before lock ([filecoin-project/lotus#5968](https://github.com/filecoin-project/lotus/pull/5968))
- flaky tests improvement: separate TestBatchDealInput from TestAPIDealFlow ([filecoin-project/lotus#6141](https://github.com/filecoin-project/lotus/pull/6141))
- Testground checks on push ([filecoin-project/lotus#5887](https://github.com/filecoin-project/lotus/pull/5887))
- Use EmptyTSK where appropriate ([filecoin-project/lotus#6134](https://github.com/filecoin-project/lotus/pull/6134))
- upgrade `lotus-soup` testplans and reduce deals concurrency to a single miner ([filecoin-project/lotus#6122](https://github.com/filecoin-project/lotus/pull/6122)
- Initial draft: basic build instructions on Readme ([filecoin-project/lotus#6498](https://github.com/filecoin-project/lotus/pull/6498))
- Remove rc changelog, compile the new changelog for final release only ([filecoin-project/lotus#6444](https://github.com/filecoin-project/lotus/pull/6444))
- updated configuration comments for docs ([filecoin-project/lotus#6440](https://github.com/filecoin-project/lotus/pull/6440))
- Set ntwk v13 HyperDrive Calibration upgrade epoch ([filecoin-project/lotus#6441](https://github.com/filecoin-project/lotus/pull/6441))
This is an optional but **highly recommended** release of Lotus for lotus miners that has many bug fixes and improvements based on the feedback we got from the community since HyperDrive.
-`AggregateAboveBaseFee` is added to miner sealing configuration for setting the network base fee to start aggregating proofs. When the network base fee is lower than this value, the prove commits will be submitted individually via `ProveCommitSector`. According to the [Batch Incentive Alignment](https://github.com/filecoin-project/FIPs/blob/master/FIPS/fip-0013.md#batch-incentive-alignment) introduced in FIP-0013, we recommend miners to set this value to 0.15 nanoFIL(which is the default value) to avoid unexpected aggregation fee in burn and enjoy the most benefits of aggregation!
This is an optional but **highly recommended** release of Lotus for lotus miners that has many bug fixes and improvements based on the feedback we got from the community since HyperDrive.
-`AggregateAboveBaseFee` is added to miner sealing configuration for setting the network base fee to start aggregating proofs. When the network base fee is lower than this value, the prove commits will be submitted individually via `ProveCommitSector`. According to the [Batch Incentive Alignment](https://github.com/filecoin-project/FIPs/blob/master/FIPS/fip-0013.md#batch-incentive-alignment) introduced in FIP-0013, we recommend miners to set this value to 0.15 nanoFIL(which is the default value) to avoid unexpected aggregation fee in burn and enjoy the most benefits of aggregation!
- [FIP-0011](https://github.com/filecoin-project/FIPs/blob/master/FIPS/fip-0011.md): Remove reward auction from reporting consensus faults
- [FIP-0012](https://github.com/filecoin-project/FIPs/blob/master/FIPS/fip-0012.md): DataCap Top up for FIL+ Client Addresses
- [FIP-0013](https://github.com/filecoin-project/FIPs/blob/master/FIPS/fip-0013.md): Add ProveCommitSectorAggregated method to reduce on-chain congestion
- [FIP-0015](https://github.com/filecoin-project/FIPs/blob/master/FIPS/fip-0015.md): Revert FIP-0009(Exempt Window PoSts from BaseFee burn)
Note that this release is built on top of Lotus v1.9.0. Enterprising users can use the `master` branch of Lotus to get the latest functionality, including all changes in this release candidate.
FIPs [0008](https://github.com/filecoin-project/FIPs/blob/master/FIPS/fip-0008.md) and [0013](https://github.com/filecoin-project/FIPs/blob/master/FIPS/fip-0013.md) combine to allow for a significant increase in the rate of onboarding storage on the Filecoin network. This aims to lead to more useful data being stored on the network, reduced network congestion, and lower network base fee.
**Check out the documentation [here](https://docs.filecoin.io/mine/lotus/miner-configuration/#precommitsectorsbatch) for details on the new Lotus miner sealing config options, [here](https://docs.filecoin.io/mine/lotus/miner-configuration/#fees-section) for fee config options, and explanations of the new features.**
In order to validate the Hyperdrive changes, we wrote a simulation to seal as many sectors as quickly as possible, assuming the same number and mix of 32GiB and 64GiB miners as the current network.
- We'd expect the [state-tree](https://spec.filecoin.io/#section-systems.filecoin_vm.state_tree) (and therefore [snapshot](https://docs.filecoin.io/get-started/lotus/chain/#lightweight-snapshot)) size to grow by 1.16GiB per day.
Various Lotus improvements are planned moving forward to mitigate the effects of the growing state tree size. The primary improvement is the [Lotus splitstore](https://github.com/filecoin-project/lotus/discussions/5788), which will soon be enabled by default. The feature allows for [online garbage collection](https://github.com/filecoin-project/lotus/issues/6577) for nodes that do not seek to maintain full chain and state history, thus eliminating the need for users to delete their datastores and sync from snapshots.
Included in the HyperDrive upgrade is [FIP-0015](https://github.com/filecoin-project/FIPs/blob/master/FIPS/fip-0015.md) which eliminates the special-case gas treatment of `SubmitWindowedPoSt` messages that was introduced in [FIP-0009](https://github.com/filecoin-project/FIPs/blob/master/FIPS/fip-0009.md). Although `SubmitWindowedPoSt` messages will be relatively cheap, thanks to the introduction of optimistic acceptance of these proofs in [FIP-0010](https://github.com/filecoin-project/FIPs/blob/master/FIPS/fip-0010.md), storage providers should pay attention to their `MaxWindowPoStGasFee` config option: too low and PoSts may not land on chain; too high and they may cost an exorbitant amount!
This is a mandatory release of Lotus that upgrades the network to version 12, which introduces various performance improvements to the cron processing of the power actor. The network will upgrade at height 712320, which is 2021-04-29T06:00:00Z.
This is a mandatory release of Lotus that upgrades the network to version 11, which implements [FIP-0014](https://github.com/filecoin-project/FIPs/blob/master/FIPS/fip-0014.md). The network will upgrade at height 665280, which is 2021-04-12T22:00:00Z.
This release also expands the `lotus-miner sectors extend` CLI, with a new option that automatically extends all extensible v1 sectors. The option can be run using `lotus-miner sectors extend --v1-sectors`.
- The `tolerance` flag can be passed to indicate what durations aren't "worth" extending. It defaults to one week, which means that sectors whose current lifetime's are within one week of the maximum possible lifetime will not be extended.
- The `expiration-cutoff` flag can be passed to skip sectors whose expiration is past a certain point from the current head. It defaults to infinity (no cutoff), but if, say, 28800 was specified, then only sectors expiring in the next 10 days would be extended (2880 epochs in 1 day).
This is an hotfix release of Lotus that fixes a critical bug introduced in v1.5.1 in the miner windowPoSt logic. This upgrade is only affecting miner nodes.
## Changes
- fix window post rand check (https://github.com/filecoin-project/lotus/pull/5773)
- wdpost: Always use head tipset to get randomness (https://github.com/filecoin-project/lotus/pull/5774)
This is an optional release of Lotus that introduces an important fix to the WindowPoSt computation process. The change is to wait for some confidence before drawing beacon randomness for the proof. Without this, invalid proofs might be generated as the result of a null tipset.
This release also introduces the splitstore, a new optional blockstore that segregates the monolithic blockstore into cold and hot regions. The hot region contains objects from the last 4-5 finalities plus all reachable objects from two finalities away. All other objects are moved to the cold region using a compaction process that executes every finality, once 5 finalities have elapsed.
The splitstore allows us to separate the two regions quite effectively, using two separate badger blockstores. The separation
means that the live working set is much smaller, which results in potentially significant performance improvements. In addition, it means that the coldstore can be moved to a separate (bigger, slower, cheaper) disk without loss of performance.
The design also allows us to use different implementations for the two blockstores; for example, an append-only blockstore could be used for coldstore and a faster memory mapped blockstore could be used for the hotstore (eg LMDB). We plan to experiment with these options in the future.
Once the splitstore has been enabled, the existing monolithic blockstore becomes the coldstore. On the first head change notification, the splitstore will warm up the hotstore by copying all reachable objects from the current tipset into the hotstore. All new writes go into the hotstore, with the splitstore tracking the write epoch. Once 5 finalities have elapsed, and every finality thereafter, the splitstore compacts by moving cold objects into the coldstore. There is also experimental support for garbage collection, whereby nunreachable objects are simply discarded.
To enable the splitstore, add the following to config.toml:
```
[Chainstore]
EnableSplitstore = true
```
## Highlights
Other highlights include:
- Improved deal data handling - now multiple deals can be adding to sectors in parallel
- Rewriten sector pledging - it now actually cares about max sealing sector limits
- Better handling for sectors stuck in the RecoverDealIDs state
- lotus-miner sectors extend command
- Optional configurable storage path size limit
- Config to disable owner/worker fallback from control addresses (useful when owner is a key on a hardware wallet)
- A write log for node metadata, which can be restored as a backup when the metadata leveldb becomes corrupted (e.g. when you run out of disk space / system crashes in some bad way)
## Changes
- avoid use mp.cfg directly to avoid race (https://github.com/filecoin-project/lotus/pull/5350)
- Show replacing message CID is state search-msg cli (https://github.com/filecoin-project/lotus/pull/5656)
- Fix riceing by importing the main package (https://github.com/filecoin-project/lotus/pull/5675)
- Remove sectors with all deals expired in RecoverDealIDs (https://github.com/filecoin-project/lotus/pull/5658)
This is a mandatory release of Lotus that introduces the fifth upgrade to the Filecoin network. The network upgrade occurs at height 550321, before which time all nodes must have updated to this release (or later). At this height, [v3 specs-actors](https://github.com/filecoin-project/specs-actors/releases/tag/v3.0.0) will take effect, which in turn implements the following two FIPs:
- [FIP-0007 h/amt-v3](https://github.com/filecoin-project/FIPs/blob/master/FIPS/fip-0007.md) which improves the performance of the Filecoin HAMT and AMT.
- [FIP-0010 off-chain Window PoSt Verification](https://github.com/filecoin-project/FIPs/blob/master/FIPS/fip-0010.md) which reduces the gas consumption of `SubmitWindowedPoSt` messages significantly by optimistically accepting Window PoSt proofs without verification, and allowing them to be disputed later by off-chain verifiers.
Note that the integration of v3 actors was already completed in 1.4.2, this upgrade simply sets the epoch for the upgrade to occur.
## Disputer
FIP-0010 introduces the ability to dispute bad Window PoSts. Node operators are encouraged to run the new Lotus disputer alongside their Lotus daemons. For more information, see the announcement [here](https://github.com/filecoin-project/lotus/discussions/5617#discussioncomment-387333).
## Changes
- [#5341](https://github.com/filecoin-project/lotus/pull/5341) Add a `LOTUS_DISABLE_V3_ACTOR_MIGRATION` envvar
This is a large, and highly recommended, optional release with new features and improvements for lotus miner and deal-making UX. The release also integrates [v3 specs-actors](https://github.com/filecoin-project/specs-actors/releases/tag/v3.0.0), which implements two FIPs:
- [FIP-0007 h/amt-v3](https://github.com/filecoin-project/FIPs/blob/master/FIPS/fip-0007.md) which improves the performance of the Filecoin HAMT and AMT.
- [FIP-0010 off-chain Window PoSt Verification](https://github.com/filecoin-project/FIPs/blob/master/FIPS/fip-0010.md) which reduces the gas consumption of `SubmitWindowedPoSt` messages significantly by optimistically accepting Window PoSt proofs without verification, and allowing them to be disputed later by off-chain verifiers.
- This is to support [FIP-0010 off-chian Window PoSt verification](https://github.com/filecoin-project/FIPs/blob/master/FIPS/fip-0010.md)
- See how to run a disputer [here](https://github.com/filecoin-project/lotus/pull/5379#issuecomment-776482445)
- [#5309](https://github.com/filecoin-project/lotus/pull/5309) Batch multiple deals in one `PublishStorageMessages`
- [#5411](https://github.com/filecoin-project/lotus/pull/5411) Handle batch `PublishStorageDeals` message in sealing recovery
- [#5505](https://github.com/filecoin-project/lotus/pull/5505) Exclude expired deals from batching in `PublishStorageDeals` messages
- Added `PublishMsgPeriod` and `MaxDealsPerPublishMsg` to miner `Dealmaking` [configuration](https://docs.filecoin.io/mine/lotus/miner-configuration/#dealmaking-section). See how they work [here](https://docs.filecoin.io/mine/lotus/miner-configuration/#publishing-several-deals-in-one-message).
- [#5538](https://github.com/filecoin-project/lotus/pull/5538), [#5549](https://github.com/filecoin-project/lotus/pull/5549) Added a command to list pending deals and force publish messages.
- [#5417](https://github.com/filecoin-project/lotus/pull/5417) Storage Manager: Always unseal full sectors
- [#5393](https://github.com/filecoin-project/lotus/pull/5393) Switched to [filecoin-ffi bls api ](https://github.com/filecoin-project/filecoin-ffi/pull/159)for bls signatures
- [#5570](https://github.com/filecoin-project/lotus/pull/5570) Added code CID to `StateReadState` return object
- [#5565](https://github.com/filecoin-project/lotus/pull/5565) Added storageadapter.PublishMsgConfig to miner in testkit for lotus-soup testplan
- [#5571](https://github.com/filecoin-project/lotus/pull/5571) Added `lotus-seed gensis car` to generate lotus block for devnets
- [#5613](https://github.com/filecoin-project/lotus/pull/5613) Check format in client commP util
- [#5507](https://github.com/filecoin-project/lotus/pull/5507) Refactored coalescing logic into its own function and take both cancellation sets into account
- [#5592](https://github.com/filecoin-project/lotus/pull/5592) Verify FFI version before building
- [#5296](https://github.com/filecoin-project/lotus/pull/5396) Upgraded to [raulk/go-watchdog@v1.0.1](https://github.com/raulk/go-watchdog/releases/tag/v1.0.1)
- [#5425](https://github.com/filecoin-project/lotus/pull/5425) Fixed stale imports in testplans/lotus-soup
- [#5535](https://github.com/filecoin-project/lotus/pull/5535) Updated to [go-fil-markets@v1.1.7](https://github.com/filecoin-project/go-fil-markets/releases/tag/v1.1.7)
- [#5616](https://github.com/filecoin-project/lotus/pull/5600) Updated to [filecoin-ffi@b6e0b35fb49ed0fe](https://github.com/filecoin-project/filecoin-ffi/releases/tag/b6e0b35fb49ed0fe)
- [#5599](https://github.com/filecoin-project/lotus/pull/5599) Updated to [go-bitfield@v0.2.4](https://github.com/filecoin-project/go-bitfield/releases/tag/v0.2.4)
- [#5614](https://github.com/filecoin-project/lotus/pull/5614), , [#5621](https://github.com/filecoin-project/lotus/pull/5621) Updated to [go-jsonrpc@v0.1.3](https://github.com/filecoin-project/go-jsonrpc/releases/tag/v0.1.3)
- [#5459](https://github.com/filecoin-project/lotus/pull/5459) Updated to [spec-actors@v3.0.1](https://github.com/filecoin-project/specs-actors/releases/tag/v3.0.1)
- [#5473](https://github.com/filecoin-project/lotus/pull/5473) Merged staging branch for v1.5.0
- [#5603](https://github.com/filecoin-project/lotus/pull/5603) Set nerpanet's upgrade epochs up to v3 actors
- [#5471](https://github.com/filecoin-project/lotus/pull/5471), [#5456](https://github.com/filecoin-project/lotus/pull/5456) Set calibration net actor v3 migration epochs for testing
This is an optional Lotus release that introduces various improvements to the sealing, mining, and deal-making processes. In particular, [#5341](https://github.com/filecoin-project/lotus/pull/5341) introduces the ability for Lotus miners to terminate sectors.
## Changes
#### Core Lotus
- fix(sync): enforce ForkLengthThreshold for synced chain (https://github.com/filecoin-project/lotus/pull/5182)
This is a MANDATORY hotfix release of Lotus that resolves a chain halt at height 336,459 caused by nondeterminism in specs-actors. The fix is to update actors to 2.3.3 in order to incorporate this fix https://github.com/filecoin-project/specs-actors/pull/1334.
This is a mandatory release of Lotus that introduces the third post-liftoff upgrade to the Filecoin network. The network upgrade occurs at height 343200, before which time all nodes must have updated to this release (or later). The change that breaks consensus is an implementation of FIP-0009(https://github.com/filecoin-project/FIPs/blob/master/FIPS/fip-0009.md).
## Changes
- Disable gas burning for window post messages (https://github.com/filecoin-project/lotus/pull/5200)
This is an optional Lotus release that introduces various improvements to the mining logic and deal-making workflow, as well as several new UX features.
This is a very small release of Lotus that fixes an issue users are experiencing when importing snapshots. There is no need to upgrade unless you experience an issue with creating a new datastore directory in the Lotus repo.
This is a mandatory release of Lotus that introduces the second post-liftoff upgrade to the Filecoin network. The network upgrade occurs at height 265200, before which time all nodes must have updated to this release (or later). This release also bumps the required version of Go to 1.15.
- Upgrading to sepcs-actors 2.3.2 (https://github.com/filecoin-project/specs-actors/releases/tag/v2.3.2)
- Introducing proofs v5.4.0 (https://github.com/filecoin-project/rust-fil-proofs/releases/tag/storage-proofs-v5.4.0), and switching between the proof types (https://github.com/filecoin-project/lotus/pull/4873)
- Don't use terminated sectors for winning PoSt (https://github.com/filecoin-project/lotus/pull/4770)
- Various small VM-level edge-case handling (https://github.com/filecoin-project/lotus/pull/4783)
- Correction of the VM circulating supply calculation (https://github.com/filecoin-project/lotus/pull/4862)
- Retuning gas costs (https://github.com/filecoin-project/lotus/pull/4830)
- Avoid sending messages to the zero BLS address (https://github.com/filecoin-project/lotus/pull/4888)
This is an optional release of Lotus that upgrades Lotus dependencies, and includes many performance enhancements, bugfixes, and UX improvements.
## Highlights
- Refactored much of the miner code (https://github.com/filecoin-project/lotus/pull/3618), improving its recovery from restarts and overall sector success rate
- Updated [proofs](https://github.com/filecoin-project/rust-fil-proofs) to v5.3.0, which brings significant performance improvements
- Updated [markets](https://github.com/filecoin-project/go-fil-markets/releases/tag/v1.0.4) to v1.0.4, which reduces failures due to reorgs (https://github.com/filecoin-project/lotus/pull/4730) and uses the newly refactored fund manager (https://github.com/filecoin-project/lotus/pull/4736)
## Changes
#### Core Lotus
- polish: add Equals method to MinerInfo shim (https://github.com/filecoin-project/lotus/pull/4604)
This is a patch release of Lotus that builds on the fixes involving worker keys that was introduced in v1.1.1. Miners and node operators should update to this release as soon as possible in order to ensure their blocks are propagated and validated.
This is a patch release of Lotus that addresses some issues caused by when miners change their worker keys. Miners and node operators should update to this release as soon as possible, especially any miner who has changed their worker key recently.
## Changes
- Miner finder for interactive client deal CLI (https://github.com/filecoin-project/lotus/pull/4504)
This is a mandatory release that introduces the first post-liftoff upgrade to the Filecoin network. The changes that break consensus are an upgrade to specs-actors v2.2.0 at epoch 170000.
## Changes
- Introduce Network version 6 (https://github.com/filecoin-project/lotus/pull/4506)
It's 1.0.0! This is an optional release of Lotus that introduces some UX improvements to the 0.10 series.
This very small release is largely cosmetic, and intended to flag the code that the Filecoin mainnet was launched with.
## API changes
-`StateMsgGasCost` has been removed. The equivalent information can be gained by calling `StateReplay`.
- A `GasCost` field has been added to the `InvocResult` type, meaning detailed gas costs will be returned when calling `StateReplay`, `StateCompute`, and `StateCall`.
- The behaviour of `StateReplay` in response to an empty tipset key has been changed. Instead of simply using the heaviest tipset (which is almost guaranteed to be an unsuccessful replay), we search now search the chain for the tipset that included the message, and replay the message in that tipset (we fail if no such tipset is found).
This is an optional release of Lotus that updates markets to 0.9.1, which fixes an issue affecting deals that were mid-transfer when the node was upgraded to 0.9.0. This release also includes some tweaks to default gas values and minor performance improvements.
## Changes
- Use updated stored ask API (https://github.com/filecoin-project/lotus/pull/4384)
- tvx: trace puts to blockstore for inclusion in CAR. (https://github.com/filecoin-project/lotus/pull/4278)
This is an optional release of Lotus that updates markets to 0.9.0, which adds the ability to restart data transfers. This release also introduces Ledger support, and various UX improvements.
## Changes
- Test the tape upgrade (https://github.com/filecoin-project/lotus/pull/4328)
- Adding in Ledger support (https://github.com/filecoin-project/lotus/pull/4290)
- Improve the UX for lotus-miner sealing workers (https://github.com/filecoin-project/lotus/pull/4329)
- Add a CLI tool for miner's to repay debt (https://github.com/filecoin-project/lotus/pull/4319)
- Rename params_testnet to params_mainnet (https://github.com/filecoin-project/lotus/pull/4336)
- Use seal-duration in calculating the earliest StartEpoch (https://github.com/filecoin-project/lotus/pull/4337)
- Reject deals that are > 7 days in the future in the BasicDealFilter (https://github.com/filecoin-project/lotus/pull/4173)
- Add an API endpoint to calculate the exact circulating supply (https://github.com/filecoin-project/lotus/pull/4148)
- lotus-pcr: ignore all other market messages (https://github.com/filecoin-project/lotus/pull/4341)
- Add message CID to InvocResult (https://github.com/filecoin-project/lotus/pull/4382)
- types: Add CID fields to messages in json marshalers (https://github.com/filecoin-project/lotus/pull/4338)
- fix(sync state): set state height to actual tipset height (https://github.com/filecoin-project/lotus/pull/4347)
- Fix off by one tipset in searchBackForMsg (https://github.com/filecoin-project/lotus/pull/4367)
- fix a panic on startup when we fail to load the tipset (https://github.com/filecoin-project/lotus/pull/4376)
- Avoid having the same message CID show up in execution traces (https://github.com/filecoin-project/lotus/pull/4350)
- feat(markets): update markets 0.9.0 and add data transfer restart (https://github.com/filecoin-project/lotus/pull/4363)
This is a consensus-breaking hotfix that addresses an issue in specs-actors v2.0.3 that made it impossible to pledge new 32GiB sectors. The change in Lotus is to update to actors v2.1.0, behind the new network version 5.
## Changes
- make pledge test pass with the race detector (https://github.com/filecoin-project/lotus/pull/4291)
- fix a race in tipset cache usage (https://github.com/filecoin-project/lotus/pull/4282)
- add an api for removing multisig signers (https://github.com/filecoin-project/lotus/pull/4274)
- cli: Don't output errors to stdout (https://github.com/filecoin-project/lotus/pull/4298)
- Fix panic in wallet export when key is not found (https://github.com/filecoin-project/lotus/pull/4299)
- Dump the block validation cache whenever we perform an import (https://github.com/filecoin-project/lotus/pull/4287)
- Fix two races (https://github.com/filecoin-project/lotus/pull/4301)
This release fixes an issue which may cause the actors v2 migration to compute the state incorrectly when more than one migration is running in parallel.
## Changes
- Make concurrent actor migrations safe (https://github.com/filecoin-project/lotus/pull/4293)
This consensus-breaking release of Lotus upgrades the actors version to v2.0.0. This requires migrating actor state from v0 to v2. The changes that break consensus are:
- Introducing v2 actors and its migration (https://github.com/filecoin-project/lotus/pull/3936)
- Runtime's Receiver() should only return ID addresses (https://github.com/filecoin-project/lotus/pull/3589)
- Update miner eligibility checks for v2 actors (https://github.com/filecoin-project/lotus/pull/4188)
- Add funds that have left FilReserve to circ supply (https://github.com/filecoin-project/lotus/pull/4160)
- Set WinningPoStSectorSetLookback to finality post-v2 actors (https://github.com/filecoin-project/lotus/pull/4190)
- fix: error when actor panics directly (https://github.com/filecoin-project/lotus/pull/3697)
- Lotus-pcr: Limit the fee cap of messages we will process, refund gas fees for windowed post and storage deals (https://github.com/filecoin-project/lotus/pull/4198)
This optional release of Lotus introduces a new version of markets which switches to CBOR-map encodings, and allows datastore migrations. The release also introduces several improvements to the mining process, a few performance optimizations, and a battery of UX additions and enhancements.
This consensus-breaking release of Lotus introduces an upgrade to the network. The changes that break consensus are:
- Upgrading to specs-actors v0.9.11, which reduces WindowPoSt faults per [FIP 0002](https://github.com/filecoin-project/FIPs/blob/master/FIPS/fip-0002.md) to reduce cost for honest miners with occasional faults (see https://github.com/filecoin-project/specs-actors/pull/1181)
- Revisions to some cryptoeconomics and network params
This release also updates go-fil-markets to fix an incompatibility issue between v0.7.2 and earlier versions.
This optional release of Lotus introduces a major refactor around how a Lotus node interacts with code from the specs-actors repo. We now use interfaces to read the state of actors, which is required to be able to reason about different versions of actors code at the same time.
- Add basic deal stats api server for spacerace slingshot (https://github.com/filecoin-project/lotus/pull/3963)
- When doing `sectors update-state`, show a list of existing states if user inputs an invalid one (https://github.com/filecoin-project/lotus/pull/3944)
This optional release of Lotus introduces some critical fixes to the window PoSt process. It also upgrades some core dependencies, and introduces many improvements to the mining process, deal-making cycle, and overall User Experience.
This consensus-breaking release of Lotus is designed to test a network upgrade on the space race testnet. The changes that break consensus are:
- Upgrading the Drand network used from the test Drand network to the League of Entropy main drand network. This is the same Drand network that will be used in the Filecoin mainnet.
- Upgrading to specs-actors v0.9.8, which adds a new method to the Multisig actor.
This release introduces some critical fixes to message selection and gas estimation logic. It also adds the ability for nodes to mark a certain tipset as checkpointed, as well as various minor improvements and bugfixes.
This consensus-breaking release of Lotus is designed to test a network upgrade on the space race testnet. The changes that break consensus are:
- Tweaking of some cryptoecon parameters in specs-actors 0.9.7 (https://github.com/filecoin-project/specs-actors/releases/tag/v0.9.7)
- Rebalancing FIL distribution to make testnet FIL scarce, which prevents base fee spikes and sets better expectations for mainnet
This release also introduces many improvements to Lotus! Among them are a new version of go-fil-markets that supports non-blocking retrieval, various spam reduction measures in the messagepool and p2p logic, and UX improvements to payment channels, dealmaking, and state inspection.
- Make chain export ~1000x times faster (https://github.com/filecoin-project/lotus/pull/3533)
- Chainwatch: Stop SyncIncomingBlocks from leaking into chainwatch processing; No panics during processing (https://github.com/filecoin-project/lotus/pull/3526)
- Conformance: various changes (https://github.com/filecoin-project/lotus/pull/3521)
This patch includes some bugfixes to the sector sealing process, and updates go-fil-markets. It also improves the performance of blocksync, adds a method to export chain state trees, and improves chainwatch.
## Changes
- Upgrade markets to v0.5.9 (https://github.com/filecoin-project/lotus/pull/3496)
- Improve blocksync to load fewer messages: (https://github.com/filecoin-project/lotus/pull/3494)
- Fix a panic in the ffi-wrapper's `ReadPiece` (https://github.com/filecoin-project/lotus/pull/3492/files)
- Fix a deadlock in the sealing scheduler (https://github.com/filecoin-project/lotus/pull/3489)
- Add test vectors for tipset tests (https://github.com/filecoin-project/lotus/pull/3485/files)
- Improve the advance-block debug command (https://github.com/filecoin-project/lotus/pull/3476)
- Add toggle for message processing to Lotus PCR (https://github.com/filecoin-project/lotus/pull/3470)
- Allow exporting recent chain state trees (https://github.com/filecoin-project/lotus/pull/3463)
- Remove height from chain rand (https://github.com/filecoin-project/lotus/pull/3458)
- Disable GC on chain badger datastore (https://github.com/filecoin-project/lotus/pull/3457)
- Account for `GasPremium` in `GasEstimateFeeCap` (https://github.com/filecoin-project/lotus/pull/3456)
- Update go-libp2p-pubsub to `master` (https://github.com/filecoin-project/lotus/pull/3455)
is increased when blocks are densely packed with messages, and decreased otherwise.
The `ParentBaseFee` is used when calculating how much a sender burns when executing a message. _Burning_ simply refers to sending attoFIL to a dedicated, unreachable account.
A message causes `ParentBaseFee * GasUsed` attoFIL to be burnt.
#### Real gas values
This release also includes our first "real" gas costs for primitive operations.
The costs were designed to account for both the _time_ that message execution takes,
as well as the _space_ a message adds to the state tree.
## Deal-making changes
There are three key changes to the deal-making process.
#### Committed Capacity sectors
Miners can now pledge "Committed Capacity" (CC) sectors, which are explicitly
stated as containing junk data, and must not include any deals. Miners can do this
to increase their storage power, and win block rewards from this pledged storage.
They can mark these sectors as "upgradable" with `lotus-miner sectors mark-for-upgrade`.
If the miner receives and accepts one or more storage deals, the sector that includes
those deals will _replace_ the CC sector. This is intended to maximize the amount of useful
storage on the Filecoin network.
#### Fast-retrieval deals
Clients can now include a `fast-retrieval` flag when proposing deals with storage miners.
If set to true, the miner will include an extra copy of the deal data. This
data can be quickly served in a retrieval deal, since it will not need to be unsealed.
#### Multiple deals per sector
Miners can now pack multiple deals into a single sector, so long as all the deals
fit into the sector capacity. This should increase the packing efficiency of miners.
- Upgrades markets to v0.5.6 (https://github.com/filecoin-project/lotus/pull/3058)
- Upgrades specs-actors to v0.9.3 (https://github.com/filecoin-project/lotus/pull/3151)
#### Core protocol
- Introduces gas values, replacing placeholders (https://github.com/filecoin-project/lotus/pull/2343)
- Implements EIP-1559, introducing a network base fee, message gas fee cap, and message gas fee premium (https://github.com/filecoin-project/lotus/pull/2874)
- Implements Poisson Sortition for elections (https://github.com/filecoin-project/lotus/pull/2084)
We are very excited to release **lotus** 0.1.0. This is our testnet release. To install lotus and join the testnet, please visit [lotu.sh](lotu.sh). Please file bug reports as [issues](https://github.com/filecoin-project/lotus/issues).
