lighthouse/beacon_node/eth2_libp2p/tests/common/mod.rs
blacktemplar c18d37c202 Use Gossipsub 1.1 (#1516)
## Issue Addressed

#1172

## Proposed Changes

* updates the libp2p dependency
* small adaptions based on changes in libp2p
* report not just valid messages but also invalid and distinguish between `IGNORE`d messages and `REJECT`ed messages


Co-authored-by: Age Manning <Age@AgeManning.com>
2020-08-30 13:06:50 +00:00

213 lines
6.9 KiB
Rust

#![cfg(test)]
use eth2_libp2p::Enr;
use eth2_libp2p::EnrExt;
use eth2_libp2p::Multiaddr;
use eth2_libp2p::Service as LibP2PService;
use eth2_libp2p::{Libp2pEvent, NetworkConfig};
use slog::{debug, error, o, Drain};
use std::net::{TcpListener, UdpSocket};
use std::time::Duration;
use types::{EnrForkId, MinimalEthSpec};
type E = MinimalEthSpec;
use libp2p::gossipsub::GossipsubConfigBuilder;
use tempdir::TempDir;
pub struct Libp2pInstance(LibP2PService<E>, exit_future::Signal);
impl std::ops::Deref for Libp2pInstance {
type Target = LibP2PService<E>;
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl std::ops::DerefMut for Libp2pInstance {
fn deref_mut(&mut self) -> &mut Self::Target {
&mut self.0
}
}
pub fn build_log(level: slog::Level, enabled: bool) -> slog::Logger {
let decorator = slog_term::TermDecorator::new().build();
let drain = slog_term::FullFormat::new(decorator).build().fuse();
let drain = slog_async::Async::new(drain).build().fuse();
if enabled {
slog::Logger::root(drain.filter_level(level).fuse(), o!())
} else {
slog::Logger::root(drain.filter(|_| false).fuse(), o!())
}
}
// A bit of hack to find an unused port.
///
/// Does not guarantee that the given port is unused after the function exists, just that it was
/// unused before the function started (i.e., it does not reserve a port).
pub fn unused_port(transport: &str) -> Result<u16, String> {
let local_addr = match transport {
"tcp" => {
let listener = TcpListener::bind("127.0.0.1:0").map_err(|e| {
format!("Failed to create TCP listener to find unused port: {:?}", e)
})?;
listener.local_addr().map_err(|e| {
format!(
"Failed to read TCP listener local_addr to find unused port: {:?}",
e
)
})?
}
"udp" => {
let socket = UdpSocket::bind("127.0.0.1:0")
.map_err(|e| format!("Failed to create UDP socket to find unused port: {:?}", e))?;
socket.local_addr().map_err(|e| {
format!(
"Failed to read UDP socket local_addr to find unused port: {:?}",
e
)
})?
}
_ => return Err("Invalid transport to find unused port".into()),
};
Ok(local_addr.port())
}
pub fn build_config(port: u16, mut boot_nodes: Vec<Enr>) -> NetworkConfig {
let mut config = NetworkConfig::default();
let path = TempDir::new(&format!("libp2p_test{}", port)).unwrap();
config.libp2p_port = port; // tcp port
config.discovery_port = port; // udp port
config.enr_tcp_port = Some(port);
config.enr_udp_port = Some(port);
config.enr_address = Some("127.0.0.1".parse().unwrap());
config.boot_nodes_enr.append(&mut boot_nodes);
config.network_dir = path.into_path();
// Reduce gossipsub heartbeat parameters
config.gs_config = GossipsubConfigBuilder::from(config.gs_config)
.heartbeat_initial_delay(Duration::from_millis(500))
.heartbeat_interval(Duration::from_millis(500))
.build()
.unwrap();
config
}
pub async fn build_libp2p_instance(boot_nodes: Vec<Enr>, log: slog::Logger) -> Libp2pInstance {
let port = unused_port("tcp").unwrap();
let config = build_config(port, boot_nodes);
// launch libp2p service
let (signal, exit) = exit_future::signal();
let (shutdown_tx, _) = futures::channel::mpsc::channel(1);
let executor = environment::TaskExecutor::new(
tokio::runtime::Handle::current(),
exit,
log.clone(),
shutdown_tx,
);
Libp2pInstance(
LibP2PService::new(executor, &config, EnrForkId::default(), &log)
.await
.expect("should build libp2p instance")
.1,
signal,
)
}
#[allow(dead_code)]
pub fn get_enr(node: &LibP2PService<E>) -> Enr {
let enr = node.swarm.local_enr().clone();
enr
}
// Returns `n` libp2p peers in fully connected topology.
#[allow(dead_code)]
pub async fn build_full_mesh(log: slog::Logger, n: usize) -> Vec<Libp2pInstance> {
let mut nodes = Vec::with_capacity(n);
for _ in 0..n {
nodes.push(build_libp2p_instance(vec![], log.clone()).await);
}
let multiaddrs: Vec<Multiaddr> = nodes
.iter()
.map(|x| get_enr(&x).multiaddr()[1].clone())
.collect();
for (i, node) in nodes.iter_mut().enumerate().take(n) {
for (j, multiaddr) in multiaddrs.iter().enumerate().skip(i) {
if i != j {
match libp2p::Swarm::dial_addr(&mut node.swarm, multiaddr.clone()) {
Ok(()) => debug!(log, "Connected"),
Err(_) => error!(log, "Failed to connect"),
};
}
}
}
nodes
}
// Constructs a pair of nodes with separate loggers. The sender dials the receiver.
// This returns a (sender, receiver) pair.
#[allow(dead_code)]
pub async fn build_node_pair(log: &slog::Logger) -> (Libp2pInstance, Libp2pInstance) {
let sender_log = log.new(o!("who" => "sender"));
let receiver_log = log.new(o!("who" => "receiver"));
let mut sender = build_libp2p_instance(vec![], sender_log).await;
let mut receiver = build_libp2p_instance(vec![], receiver_log).await;
let receiver_multiaddr = receiver.swarm.local_enr().multiaddr()[1].clone();
// let the two nodes set up listeners
let sender_fut = async {
loop {
if let Libp2pEvent::NewListenAddr(_) = sender.next_event().await {
return;
}
}
};
let receiver_fut = async {
loop {
if let Libp2pEvent::NewListenAddr(_) = receiver.next_event().await {
return;
}
}
};
let joined = futures::future::join(sender_fut, receiver_fut);
// wait for either both nodes to listen or a timeout
tokio::select! {
_ = tokio::time::delay_for(Duration::from_millis(500)) => {}
_ = joined => {}
}
match libp2p::Swarm::dial_addr(&mut sender.swarm, receiver_multiaddr.clone()) {
Ok(()) => {
debug!(log, "Sender dialed receiver"; "address" => format!("{:?}", receiver_multiaddr))
}
Err(_) => error!(log, "Dialing failed"),
};
(sender, receiver)
}
// Returns `n` peers in a linear topology
#[allow(dead_code)]
pub async fn build_linear(log: slog::Logger, n: usize) -> Vec<Libp2pInstance> {
let mut nodes = Vec::with_capacity(n);
for _ in 0..n {
nodes.push(build_libp2p_instance(vec![], log.clone()).await);
}
let multiaddrs: Vec<Multiaddr> = nodes
.iter()
.map(|x| get_enr(&x).multiaddr()[1].clone())
.collect();
for i in 0..n - 1 {
match libp2p::Swarm::dial_addr(&mut nodes[i].swarm, multiaddrs[i + 1].clone()) {
Ok(()) => debug!(log, "Connected"),
Err(_) => error!(log, "Failed to connect"),
};
}
nodes
}