> This is currently a WIP and all features are subject to alteration or removal at any time.
## Overview
The successor to #2873.
Contains the backbone of `beacon.watch` including syncing code, the initial API, and several core database tables.
See `watch/README.md` for more information, requirements and usage.
## Issue Addressed
Addresses #4117
## Proposed Changes
See https://github.com/ethereum/keymanager-APIs/pull/58 for proposed API specification.
## TODO
- [x] ~~Add submission to BN~~
- removed, see discussion in [keymanager API](https://github.com/ethereum/keymanager-APIs/pull/58)
- [x] ~~Add flag to allow voluntary exit via the API~~
- no longer needed now the VC doesn't submit exit directly
- [x] ~~Additional verification / checks, e.g. if validator on same network as BN~~
- to be done on client side
- [x] ~~Potentially wait for the message to propagate and return some exit information in the response~~
- not required
- [x] Update http tests
- [x] ~~Update lighthouse book~~
- not required if this endpoint makes it to the standard keymanager API
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Co-authored-by: Jimmy Chen <jimmy@sigmaprime.io>
## Issue Addressed
#3212
## Proposed Changes
- Introduce a new `rate_limiting_backfill_queue` - any new inbound backfill work events gets immediately sent to this FIFO queue **without any processing**
- Spawn a `backfill_scheduler` routine that pops a backfill event from the FIFO queue at specified intervals (currently halfway through a slot, or at 6s after slot start for 12s slots) and sends the event to `BeaconProcessor` via a `scheduled_backfill_work_tx` channel
- This channel gets polled last in the `InboundEvents`, and work event received is wrapped in a `InboundEvent::ScheduledBackfillWork` enum variant, which gets processed immediately or queued by the `BeaconProcessor` (existing logic applies from here)
Diagram comparing backfill processing with / without rate-limiting:
https://github.com/sigp/lighthouse/issues/3212#issuecomment-1386249922
See this comment for @paulhauner's explanation and solution: https://github.com/sigp/lighthouse/issues/3212#issuecomment-1384674956
## Additional Info
I've compared this branch (with backfill processing rate limited to to 1 and 3 batches per slot) against the latest stable version. The CPU usage during backfill sync is reduced by ~5% - 20%, more details on this page:
https://hackmd.io/@jimmygchen/SJuVpJL3j
The above testing is done on Goerli (as I don't currently have hardware for Mainnet), I'm guessing the differences are likely to be bigger on mainnet due to block size.
### TODOs
- [x] Experiment with processing multiple batches per slot. (need to think about how to do this for different slot durations)
- [x] Add option to disable rate-limiting, enabed by default.
- [x] (No longer required now we're reusing the reprocessing queue) Complete the `backfill_scheduler` task when backfill sync is completed or not required
## Issue Addressed
#4127. PR to test port conflicts in CI tests .
## Proposed Changes
See issue for more details, potential solution could be adding a cache bound by time to the `unused_port` function.
## Issue Addressed
#3708
## Proposed Changes
- Add `is_finalized_block` method to `BeaconChain` in `beacon_node/beacon_chain/src/beacon_chain.rs`.
- Add `is_finalized_state` method to `BeaconChain` in `beacon_node/beacon_chain/src/beacon_chain.rs`.
- Add `fork_and_execution_optimistic_and_finalized` in `beacon_node/http_api/src/state_id.rs`.
- Add `ExecutionOptimisticFinalizedForkVersionedResponse` type in `consensus/types/src/fork_versioned_response.rs`.
- Add `execution_optimistic_finalized_fork_versioned_response`function in `beacon_node/http_api/src/version.rs`.
- Add `ExecutionOptimisticFinalizedResponse` type in `common/eth2/src/types.rs`.
- Add `add_execution_optimistic_finalized` method in `common/eth2/src/types.rs`.
- Update API response methods to include finalized.
- Remove `execution_optimistic_fork_versioned_response`
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Which issue # does this PR address?
https://github.com/sigp/lighthouse/issues/3669
## Proposed Changes
Please list or describe the changes introduced by this PR.
- A new API to fetch fork choice data, as specified [here](https://github.com/ethereum/beacon-APIs/pull/232)
- A new integration test to test the new API
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
- `extra_data` field specified in the beacon-API spec is not implemented, please let me know if I should instead.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
NA
## Proposed Changes
- Bump versions.
- Bump openssl version to resolve various `cargo audit` notices.
## Additional Info
- Requires further testing
* rename 4844 to deneb
* rename 4844 to deneb
* move excess data gas field
* get EF tests working
* fix ef tests lint
* fix the blob identifier ef test
* fix accessed files ef test script
* get beacon chain tests passing
* introduce availability pending block
* add intoavailableblock trait
* small fixes
* add 'gossip blob cache' and start to clean up processing and transition types
* shard memory blob cache
* Initial commit
* Fix after rebase
* Add gossip verification conditions
* cache cleanup
* general chaos
* extended chaos
* cargo fmt
* more progress
* more progress
* tons of changes, just tryna compile
* everything, everywhere, all at once
* Reprocess an ExecutedBlock on unavailable blobs
* Add sus gossip verification for blobs
* Merge stuff
* Remove reprocessing cache stuff
* lint
* Add a wrapper to allow construction of only valid `AvailableBlock`s
* rename blob arc list to blob list
* merge cleanuo
* Revert "merge cleanuo"
This reverts commit 5e98326878c77528d0c4668c5a4db4a4b0fbaeaa.
* Revert "Revert "merge cleanuo""
This reverts commit 3a4009443a5812b3028abe855079307436dc5419.
* fix rpc methods
* move beacon block and blob to eth2/types
* rename gossip blob cache to data availability checker
* lots of changes
* fix some compilation issues
* fix compilation issues
* fix compilation issues
* fix compilation issues
* fix compilation issues
* fix compilation issues
* cargo fmt
* use a common data structure for block import types
* fix availability check on proposal import
* refactor the blob cache and split the block wrapper into two types
* add type conversion for signed block and block wrapper
* fix beacon chain tests and do some renaming, add some comments
* Partial processing (#4)
* move beacon block and blob to eth2/types
* rename gossip blob cache to data availability checker
* lots of changes
* fix some compilation issues
* fix compilation issues
* fix compilation issues
* fix compilation issues
* fix compilation issues
* fix compilation issues
* cargo fmt
* use a common data structure for block import types
* fix availability check on proposal import
* refactor the blob cache and split the block wrapper into two types
* add type conversion for signed block and block wrapper
* fix beacon chain tests and do some renaming, add some comments
* cargo update (#6)
---------
Co-authored-by: realbigsean <sean@sigmaprime.io>
Co-authored-by: realbigsean <seananderson33@gmail.com>
* Update get blobs endpoint to return BlobSidecarList
* Update code comment
* Update blob retrieval to return BlobSidecarList without Arc
* Remove usage of BlobSidecarList type alias to avoid code conflicts
* Add clippy allow exception
## Issue Addressed
NA
## Proposed Changes
Sets the mainnet Capella fork epoch as per https://github.com/ethereum/consensus-specs/pull/3300
## Additional Info
I expect the `ef_tests` to fail until we get a compatible consensus spec tests release.
Currently Lighthouse will remain uncontactable if users port forward a port that is not the same as the one they are listening on.
For example, if Lighthouse runs with port 9000 TCP/UDP locally but a router is configured to pass 9010 externally to the lighthouse node on 9000, other nodes on the network will not be able to reach the lighthouse node.
This occurs because Lighthouse does not update its ENR TCP port on external socket discovery. The intention was always that users should use `--enr-tcp-port` to customise this, but this is non-intuitive.
The difficulty arises because we have no discovery mechanism to find our external TCP port. If we discovery a new external UDP port, we must guess what our external TCP port might be. This PR assumes the external TCP port is the same as the external UDP port (which may not be the case) and thus updates the TCP port along with the UDP port if the `--enr-tcp-port` flag is not set.
Along with this PR, will be added documentation to the Lighthouse book so users can correctly understand and configure their ENR to maximize Lighthouse's connectivity.
This relies on https://github.com/sigp/discv5/pull/166 and we should wait for a new release in discv5 before adding this PR.
There is a race condition which occurs when multiple discovery queries return at almost the exact same time and they independently contain a useful peer we would like to connect to.
The condition can occur that we can add the same peer to the dial queue, before we get a chance to process the queue.
This ends up displaying an error to the user:
```
ERRO Dialing an already dialing peer
```
Although this error is harmless it's not ideal.
There are two solutions to resolving this:
1. As we decide to dial the peer, we change the state in the peer-db to dialing (before we add it to the queue) which would prevent other requests from adding to the queue.
2. We prevent duplicates in the dial queue
This PR has opted for 2. because 1. will complicate the code in that we are changing states in non-intuitive places. Although this technically adds a very slight performance cost, its probably a cleaner solution as we can keep the state-changing logic in one place.
## Issue Addressed
In #4027 I forgot to add the `parent_block_number` to the payload attributes SSE.
## Proposed Changes
Compute the parent block number while computing the pre-payload attributes. Pass it on to the SSE stream.
## Additional Info
Not essential for v3.5.1 as I suspect most builders don't need the `parent_block_root`. I would like to use it for my dummy no-op builder however.
## Issue Addressed
Add support for ipv6 and dual stack in lighthouse.
## Proposed Changes
From an user perspective, now setting an ipv6 address, optionally configuring the ports should feel exactly the same as using an ipv4 address. If listening over both ipv4 and ipv6 then the user needs to:
- use the `--listen-address` two times (ipv4 and ipv6 addresses)
- `--port6` becomes then required
- `--discovery-port6` can now be used to additionally configure the ipv6 udp port
### Rough list of code changes
- Discovery:
- Table filter and ip mode set to match the listening config.
- Ipv6 address, tcp port and udp port set in the ENR builder
- Reported addresses now check which tcp port to give to libp2p
- LH Network Service:
- Can listen over Ipv6, Ipv4, or both. This uses two sockets. Using mapped addresses is disabled from libp2p and it's the most compatible option.
- NetworkGlobals:
- No longer stores udp port since was not used at all. Instead, stores the Ipv4 and Ipv6 TCP ports.
- NetworkConfig:
- Update names to make it clear that previous udp and tcp ports in ENR were Ipv4
- Add fields to configure Ipv6 udp and tcp ports in the ENR
- Include advertised enr Ipv6 address.
- Add type to model Listening address that's either Ipv4, Ipv6 or both. A listening address includes the ip, udp port and tcp port.
- UPnP:
- Kept only for ipv4
- Cli flags:
- `--listen-addresses` now can take up to two values
- `--port` will apply to ipv4 or ipv6 if only one listening address is given. If two listening addresses are given it will apply only to Ipv4.
- `--port6` New flag required when listening over ipv4 and ipv6 that applies exclusively to Ipv6.
- `--discovery-port` will now apply to ipv4 and ipv6 if only one listening address is given.
- `--discovery-port6` New flag to configure the individual udp port of ipv6 if listening over both ipv4 and ipv6.
- `--enr-udp-port` Updated docs to specify that it only applies to ipv4. This is an old behaviour.
- `--enr-udp6-port` Added to configure the enr udp6 field.
- `--enr-tcp-port` Updated docs to specify that it only applies to ipv4. This is an old behaviour.
- `--enr-tcp6-port` Added to configure the enr tcp6 field.
- `--enr-addresses` now can take two values.
- `--enr-match` updated behaviour.
- Common:
- rename `unused_port` functions to specify that they are over ipv4.
- add functions to get unused ports over ipv6.
- Testing binaries
- Updated code to reflect network config changes and unused_port changes.
## Additional Info
TODOs:
- use two sockets in discovery. I'll get back to this and it's on https://github.com/sigp/discv5/pull/160
- lcli allow listening over two sockets in generate_bootnodes_enr
- add at least one smoke flag for ipv6 (I have tested this and works for me)
- update the book
## Proposed Changes
Two tiny updates to satisfy Clippy 1.68
Plus refactoring of the `http_api` into less complex types so the compiler can chew and digest them more easily.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Closes#3896Closes#3998Closes#3700
## Proposed Changes
- Optimise the calculation of withdrawals for payload attributes by avoiding state clones, avoiding unnecessary state advances and reading from the snapshot cache if possible.
- Use the execution layer's payload attributes cache to avoid re-calculating payload attributes. I actually implemented a new LRU cache just for withdrawals but it had the exact same key and most of the same data as the existing payload attributes cache, so I deleted it.
- Add a new SSE event that fires when payloadAttributes are calculated. This is useful for block builders, a la https://github.com/ethereum/beacon-APIs/issues/244.
- Add a new CLI flag `--always-prepare-payload` which forces payload attributes to be sent with every fcU regardless of connected proposers. This is intended for use by builders/relays.
For maximum effect, the flags I've been using to run Lighthouse in "payload builder mode" are:
```
--always-prepare-payload \
--prepare-payload-lookahead 12000 \
--suggested-fee-recipient 0x0000000000000000000000000000000000000000
```
The fee recipient is required so Lighthouse has something to pack in the payload attributes (it can be ignored by the builder). The lookahead causes fcU to be sent at the start of every slot rather than at 8s. As usual, fcU will also be sent after each change of head block. I think this combination is sufficient for builders to build on all viable heads. Often there will be two fcU (and two payload attributes) sent for the same slot: one sent at the start of the slot with the head from `n - 1` as the parent, and one sent after the block arrives with `n` as the parent.
Example usage of the new event stream:
```bash
curl -N "http://localhost:5052/eth/v1/events?topics=payload_attributes"
```
## Additional Info
- [x] Tests added by updating the proposer re-org tests. This has the benefit of testing the proposer re-org code paths with withdrawals too, confirming that the new changes don't interact poorly.
- [ ] Benchmarking with `blockdreamer` on devnet-7 showed promising results but I'm yet to do a comparison to `unstable`.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Proposed Changes
Remove built-in support for Ropsten and Kiln via the `--network` flag. Both testnets are long dead and deprecated.
This shaves about 30MiB off the binary size, from 135MiB to 103MiB (maxperf), or 165MiB to 135MiB (release).
## Issue Addressed
Cleans up all the remnants of 4844 in capella. This makes sure when 4844 is reviewed there is nothing we are missing because it got included here
## Proposed Changes
drop a bomb on every 4844 thing
## Additional Info
Merge process I did (locally) is as follows:
- squash merge to produce one commit
- in new branch off unstable with the squashed commit create a `git revert HEAD` commit
- merge that new branch onto 4844 with `--strategy ours`
- compare local 4844 to remote 4844 and make sure the diff is empty
- enjoy
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
- Bump versions
## Sepolia Capella Upgrade
This release will enable the Capella fork on Sepolia. We are planning to publish this release on the 23rd of Feb 2023.
Users who can build from source and wish to do pre-release testing can use this branch.
## Additional Info
- [ ] Requires further testing
## Issue Addressed
I discovered this issue while implementing [this test](https://github.com/jimmygchen/lighthouse/blob/test-example/beacon_node/network/src/beacon_processor/tests.rs#L895), where I tried to manipulate the slot clock with:
`rig.chain.slot_clock.set_current_time(duration);`
however the change doesn't get reflected in the `slot_clock` in `ReprocessQueue`, and I realised `slot_clock` was cloned a few times in the code, and therefore changing the time in `rig.chain.slot_clock` doesn't have any effect in `ReprocessQueue`.
I've incorporated the suggestion from the @paulhauner and @michaelsproul - wrapping the `ManualSlotClock.current_time` (`RwLock<Duration>)` in an `Arc`, and the above test now passes.
Let's see if this breaks any existing tests :)
On heavily crowded networks, we are seeing many attempted connections to our node every second.
Often these connections come from peers that have just been disconnected. This can be for a number of reasons including:
- We have deemed them to be not as useful as other peers
- They have performed poorly
- They have dropped the connection with us
- The connection was spontaneously lost
- They were randomly removed because we have too many peers
In all of these cases, if we have reached or exceeded our target peer limit, there is no desire to accept new connections immediately after the disconnect from these peers. In fact, it often costs us resources to handle the established connections and defeats some of the logic of dropping them in the first place.
This PR adds a timeout, that prevents recently disconnected peers from reconnecting to us.
Technically we implement a ban at the swarm layer to prevent immediate re connections for at least 10 minutes. I decided to keep this light, and use a time-based LRUCache which only gets updated during the peer manager heartbeat to prevent added stress of polling a delay map for what could be a large number of peers.
This cache is bounded in time. An extra space bound could be added should people consider this a risk.
Co-authored-by: Diva M <divma@protonmail.com>
## Proposed Changes
Clippy 1.67.0 put us on blast for the size of some of our errors, most of them written by me ( 👀 ). This PR shrinks the size of `BeaconChainError` by dropping some extraneous info and boxing an inner error which should only occur infrequently anyway.
For the `AttestationSlashInfo` and `BlockSlashInfo` I opted to ignore the lint as they are always used in a `Result<A, Info>` where `A` is a similar size. This means they don't bloat the size of the `Result`, so it's a bit annoying for Clippy to report this as an issue.
I also chose to ignore `clippy::uninlined-format-args` because I think the benefit-to-churn ratio is too low. E.g. sometimes we have long identifiers in `format!` args and IMO the non-inlined form is easier to read:
```rust
// I prefer this...
format!(
"{} did {} to {}",
REALLY_LONG_CONSTANT_NAME,
ANOTHER_REALLY_LONG_CONSTANT_NAME,
regular_long_identifier_name
);
// To this
format!("{REALLY_LONG_CONSTANT_NAME} did {ANOTHER_REALLY_LONG_CONSTANT_NAME} to {regular_long_identifier_name}");
```
I tried generating an automatic diff with `cargo clippy --fix` but it came out at:
```
250 files changed, 1209 insertions(+), 1469 deletions(-)
```
Which seems like a bad idea when we'd have to back-merge it to `capella` and `eip4844` 😱
* Import BLS to execution changes before Capella
* Test for BLS to execution change HTTP API
* Pack BLS to execution changes in LIFO order
* Remove unused var
* Clippy
## Proposed Changes
Another `tree-states` motivated PR, this adds `jemalloc` as the default allocator, with an option to use the system allocator by compiling with `FEATURES="" make`.
- [x] Metrics
- [x] Test on Windows
- [x] Test on macOS
- [x] Test with `musl`
- [x] Metrics dashboard on `lighthouse-metrics` (https://github.com/sigp/lighthouse-metrics/pull/37)
Co-authored-by: Michael Sproul <micsproul@gmail.com>
* Import BLS to execution changes before Capella
* Test for BLS to execution change HTTP API
* Pack BLS to execution changes in LIFO order
* Remove unused var
* Clippy
## Proposed Changes
Another `tree-states` motivated PR, this adds `jemalloc` as the default allocator, with an option to use the system allocator by compiling with `FEATURES="" make`.
- [x] Metrics
- [x] Test on Windows
- [x] Test on macOS
- [x] Test with `musl`
- [x] Metrics dashboard on `lighthouse-metrics` (https://github.com/sigp/lighthouse-metrics/pull/37)
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
Recent discussions with other client devs about optimistic sync have revealed a conceptual issue with the optimisation implemented in #3738. In designing that feature I failed to consider that the execution node checks the `blockHash` of the execution payload before responding with `SYNCING`, and that omitting this check entirely results in a degradation of the full node's validation. A node omitting the `blockHash` checks could be tricked by a supermajority of validators into following an invalid chain, something which is ordinarily impossible.
## Proposed Changes
I've added verification of the `payload.block_hash` in Lighthouse. In case of failure we log a warning and fall back to verifying the payload with the execution client.
I've used our existing dependency on `ethers_core` for RLP support, and a new dependency on Parity's `triehash` crate for the Merkle patricia trie. Although the `triehash` crate is currently unmaintained it seems like our best option at the moment (it is also used by Reth, and requires vastly less boilerplate than Parity's generic `trie-root` library).
Block hash verification is pretty quick, about 500us per block on my machine (mainnet).
The optimistic finalized sync feature can be disabled using `--disable-optimistic-finalized-sync` which forces full verification with the EL.
## Additional Info
This PR also introduces a new dependency on our [`metastruct`](https://github.com/sigp/metastruct) library, which was perfectly suited to the RLP serialization method. There will likely be changes as `metastruct` grows, but I think this is a good way to start dogfooding it.
I took inspiration from some Parity and Reth code while writing this, and have preserved the relevant license headers on the files containing code that was copied and modified.
## Proposed Changes
Update the Gnosis chain bootnodes. The current list of Gnosis bootnodes were abandoned at some point before the Gnosis merge and are now failing to bootstrap peers. There's a workaround list of bootnodes here: https://docs.gnosischain.com/updates/20221208-temporary-bootnodes
The list from this PR represents the long-term bootnodes run by the Gnosis team. We will also try to set up SigP bootnodes for Gnosis chain at some point.
## Proposed Changes
With proposer boosting implemented (#2822) we have an opportunity to re-org out late blocks.
This PR adds three flags to the BN to control this behaviour:
* `--disable-proposer-reorgs`: turn aggressive re-orging off (it's on by default).
* `--proposer-reorg-threshold N`: attempt to orphan blocks with less than N% of the committee vote. If this parameter isn't set then N defaults to 20% when the feature is enabled.
* `--proposer-reorg-epochs-since-finalization N`: only attempt to re-org late blocks when the number of epochs since finalization is less than or equal to N. The default is 2 epochs, meaning re-orgs will only be attempted when the chain is finalizing optimally.
For safety Lighthouse will only attempt a re-org under very specific conditions:
1. The block being proposed is 1 slot after the canonical head, and the canonical head is 1 slot after its parent. i.e. at slot `n + 1` rather than building on the block from slot `n` we build on the block from slot `n - 1`.
2. The current canonical head received less than N% of the committee vote. N should be set depending on the proposer boost fraction itself, the fraction of the network that is believed to be applying it, and the size of the largest entity that could be hoarding votes.
3. The current canonical head arrived after the attestation deadline from our perspective. This condition was only added to support suppression of forkchoiceUpdated messages, but makes intuitive sense.
4. The block is being proposed in the first 2 seconds of the slot. This gives it time to propagate and receive the proposer boost.
## Additional Info
For the initial idea and background, see: https://github.com/ethereum/consensus-specs/pull/2353#issuecomment-950238004
There is also a specification for this feature here: https://github.com/ethereum/consensus-specs/pull/3034
Co-authored-by: Michael Sproul <micsproul@gmail.com>
Co-authored-by: pawan <pawandhananjay@gmail.com>
