## Issue Addressed
Closes#1769Closes#1708
## Proposed Changes
Tweaks the op pool pruning so that the attestation pool is pruned against the wall-clock epoch instead of the finalized state's epoch. This should reduce the unbounded growth that we've seen during periods without finality.
Also fixes up the voluntary exit pruning as raised in #1708.
## Issue Addressed
- Resolves#1766
## Proposed Changes
- Use the `warp::filters::cors` filter instead of our work-around.
## Additional Info
It's not trivial to enable/disable `cors` using `warp`, since using `routes.with(cors)` changes the type of `routes`. This makes it difficult to apply/not apply cors at runtime. My solution has been to *always* use the `warp::filters::cors` wrapper but when cors should be disabled, just pass the HTTP server listen address as the only permissible origin.
## Issue Addressed
`node` endpoints in #1434
## Proposed Changes
Implement these:
```
/eth/v1/node/health
/eth/v1/node/peers/{peer_id}
/eth/v1/node/peers
```
- Add an `Option<Enr>` to `PeerInfo`
- Finish implementation of `/eth/v1/node/identity`
## Additional Info
- should update the `peers` endpoints when #1764 is resolved
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Closes#1548
## Proposed Changes
Optimizes attester slashing choice by choosing the ones that cover the most amount of validators slashed, with the highest effective balances
## Additional Info
Initial pass, need to write a test for it
check for advanced peers and the state of the chain wrt the clock slot to decide if a chain is or not synced /transitioning to a head sync. Also a fix that prevented getting the right state while syncing heads
## Issue Addressed
Resolves#1776
## Proposed Changes
The beacon chain builder was using the canonical head's state root for the `genesis_state_root` field.
## Additional Info
## Issue Addressed
Resolves#1792
## Proposed Changes
Use `chain.best_slot()` instead of the sync state's target slot in the `not_while_syncing_filter`
## Additional Info
N/A
## Issue Addressed
#1614 and a couple of sync-stalling problems, the most important is a cyclic dependency between the sync manager and the peer manager
## Issue Addressed
Closes#1557
## Proposed Changes
Modify the pruning algorithm so that it mutates the head-tracker _before_ committing the database transaction to disk, and _only if_ all the heads to be removed are still present in the head-tracker (i.e. no concurrent mutations).
In the process of writing and testing this I also had to make a few other changes:
* Use internal mutability for all `BeaconChainHarness` functions (namely the RNG and the graffiti), in order to enable parallel calls (see testing section below).
* Disable logging in harness tests unless the `test_logger` feature is turned on
And chose to make some clean-ups:
* Delete the `NullMigrator`
* Remove type-based configuration for the migrator in favour of runtime config (simpler, less duplicated code)
* Use the non-blocking migrator unless the blocking migrator is required. In the store tests we need the blocking migrator because some tests make asserts about the state of the DB after the migration has run.
* Rename `validators_keypairs` -> `validator_keypairs` in the `BeaconChainHarness`
## Testing
To confirm that the fix worked, I wrote a test using [Hiatus](https://crates.io/crates/hiatus), which can be found here:
https://github.com/michaelsproul/lighthouse/tree/hiatus-issue-1557
That test can't be merged because it inserts random breakpoints everywhere, but if you check out that branch you can run the test with:
```
$ cd beacon_node/beacon_chain
$ cargo test --release --test parallel_tests --features test_logger
```
It should pass, and the log output should show:
```
WARN Pruning deferred because of a concurrent mutation, message: this is expected only very rarely!
```
## Additional Info
This is a backwards-compatible change with no impact on consensus.
## Issue Addressed
NA
## Proposed Changes
Adds a direction field to `PeerConnectionStatus` that can be accessed by calling `is_outgoing` which will return `true` iff the peer is connected and the first connection was an outgoing one.
## Issue Addressed
#1729#1730
Which issue # does this PR address?
## Proposed Changes
1. Fixes a bug in the simulator where nodes can't find each other due to 0 udp ports in their enr.
2. Fixes bugs in attestation service where we are unsubscribing from a subnet prematurely.
More testing is needed for attestation service fixes.
## Proposed Changes
Adds a gossipsub topic filter that only allows subscribing and incoming subscriptions from valid ETH2 topics.
## Additional Info
Currently the preparation of the valid topic hashes uses only the current fork id but in the future it must also use all possible future fork ids for planned forks. This has to get added when hard coded forks get implemented.
DO NOT MERGE: We first need to merge the libp2p changes (see https://github.com/sigp/rust-libp2p/pull/70) so that we can refer from here to a commit hash inside the lighthouse branch.
## Proposed Changes
Implement the new message id function (see https://github.com/ethereum/eth2.0-specs/pull/2089) using an additional fast message id function for better performance + caching decompressed data.
## Issue Addressed
N/A
## Proposed Changes
This PR limits the length of the stream received by the snappy decoder to be the maximum allowed size for the received rpc message type. Also adds further checks to ensure that the length specified in the rpc [encoding-dependent header](https://github.com/ethereum/eth2.0-specs/blob/dev/specs/phase0/p2p-interface.md#encoding-strategies) is within the bounds for the rpc message type being decoded.
Squashed commit of the following:
commit f99373cbaec9adb2bdbae3f7e903284327962083
Author: Age Manning <Age@AgeManning.com>
Date: Mon Oct 5 18:44:09 2020 +1100
Clean up obsolute TODOs
## Issue Addressed
- Resolves#1706
## Proposed Changes
Updates dependencies across the workspace. Any crate that was not able to be brought to the latest version is listed in #1712.
## Additional Info
NA
* Initial rebase
* Remove old code
* Correct release tests
* Rebase commit
* Remove eth2-testnet dep on eth2libp2p
* Remove crates lost in rebase
* Remove unused dep
## Issue Addressed
Downgrade inconsistent chain segment states from `panic` to `crit`. I don't love this solution but since range can always bounce back from any of those, we don't panic.
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
chain state inconsistencies
## Proposed Changes
- a batch can be fake-failed by Range if it needs to move a peer to another chain. The peer will still send blocks/ errors / produce timeouts for those requests, so check when we get a response from the RPC that the request id matches, instead of only the peer, since a re-request can be directed to the same peer.
- if an optimistic batch succeeds, store the attempt to avoid trying it again when quickly switching chains. Also, use it only if ahead of our current target, instead of the segment's start epoch
## Issue Addressed
NA
## Proposed Changes
Uses a `Drop` implementation to help ensure that `BeaconProcessor` workers are freed. This will help prevent against regression, if someone happens to add an early return and it will also help in the case of a panic.
## Additional Info
NA
## Issue Addressed
Downgrade inconsistent chain segment states from `panic` to `crit`. I don't love this solution but since range can always bounce back from any of those, we don't panic.
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
chain state inconsistencies
## Proposed Changes
- a batch can be fake-failed by Range if it needs to move a peer to another chain. The peer will still send blocks/ errors / produce timeouts for those requests, so check when we get a response from the RPC that the request id matches, instead of only the peer, since a re-request can be directed to the same peer.
- if an optimistic batch succeeds, store the attempt to avoid trying it again when quickly switching chains. Also, use it only if ahead of our current target, instead of the segment's start epoch
## Issue Addressed
NA
## Proposed Changes
Uses a `Drop` implementation to help ensure that `BeaconProcessor` workers are freed. This will help prevent against regression, if someone happens to add an early return and it will also help in the case of a panic.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Addresses an interesting DoS vector raised by @protolambda by verifying that the head and target are consistent when processing aggregate attestations. This check prevents us from loading very old target blocks and doing lots of work to skip them to the current slot.
## Additional Info
NA
This commit was modified by Paul H whilst rebasing master onto
v0.3.0-staging
Adding UPnP support will help grow the DHT by allowing NAT traversal for peers with UPnP supported routers.
Using IGD library: https://docs.rs/igd/0.10.0/igd/
Adding the the libp2p tcp port and discovery udp port. If this fails it simply logs the attempt and moves on
Co-authored-by: Age Manning <Age@AgeManning.com>
This commit was edited by Paul H when rebasing from master to
v0.3.0-staging.
Solution 2 proposed here: https://github.com/sigp/lighthouse/issues/1435#issuecomment-692317639
- Adds an optional `--wss-checkpoint` flag that takes a string `root:epoch`
- Verify that the given checkpoint exists in the chain, or that the the chain syncs through this checkpoint. If not, shutdown and prompt the user to purge state before restarting.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
Addresses an interesting DoS vector raised by @protolambda by verifying that the head and target are consistent when processing aggregate attestations. This check prevents us from loading very old target blocks and doing lots of work to skip them to the current slot.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
- Implements a HTTP API for the validator client.
- Creates EIP-2335 keystores with an empty `description` field, instead of a missing `description` field. Adds option to set name.
- Be more graceful with setups without any validators (yet)
- Remove an error log when there are no validators.
- Create the `validator` dir if it doesn't exist.
- Allow building a `ValidatorDir` without a withdrawal keystore (required for the API method where we only post a voting keystore).
- Add optional `description` field to `validator_definitions.yml`
## TODO
- [x] Signature header, as per https://github.com/sigp/lighthouse/issues/1269#issuecomment-649879855
- [x] Return validator descriptions
- [x] Return deposit data
- [x] Respect the mnemonic offset
- [x] Check that mnemonic can derive returned keys
- [x] Be strict about non-localhost
- [x] Allow graceful start without any validators (+ create validator dir)
- [x] Docs final pass
- [x] Swap to EIP-2335 description field.
- [x] Fix Zerioze TODO in VC api types.
- [x] Zeroize secp256k1 key
## Endpoints
- [x] `GET /lighthouse/version`
- [x] `GET /lighthouse/health`
- [x] `GET /lighthouse/validators`
- [x] `POST /lighthouse/validators/hd`
- [x] `POST /lighthouse/validators/keystore`
- [x] `PATCH /lighthouse/validators/:validator_pubkey`
- [ ] ~~`POST /lighthouse/validators/:validator_pubkey/exit/:epoch`~~ Future works
## Additional Info
TBC
Adding UPnP support will help grow the DHT by allowing NAT traversal for peers with UPnP supported routers.
## Issue Addressed
#927
## Proposed Changes
Using IGD library: https://docs.rs/igd/0.10.0/igd/
Adding the the libp2p tcp port and discovery udp port. If this fails it simply logs the attempt and moves on
## Additional Info
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
Solution 2 proposed here: https://github.com/sigp/lighthouse/issues/1435#issuecomment-692317639
## Proposed Changes
- Adds an optional `--wss-checkpoint` flag that takes a string `root:epoch`
- Verify that the given checkpoint exists in the chain, or that the the chain syncs through this checkpoint. If not, shutdown and prompt the user to purge state before restarting.
## Additional Info
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
Closes#673
## Proposed Changes
Store a schema version in the database so that future releases can check they're running against a compatible database version. This would also enable automatic migration on breaking database changes, but that's left as future work.
The database config is also stored in the database so that the `slots_per_restore_point` value can be checked for consistency, which closes#673
- Resolves#1550
- Resolves#824
- Resolves#825
- Resolves#1131
- Resolves#1411
- Resolves#1256
- Resolve#1177
- Includes the `ShufflingId` struct initially defined in #1492. That PR is now closed and the changes are included here, with significant bug fixes.
- Implement the https://github.com/ethereum/eth2.0-APIs in a new `http_api` crate using `warp`. This replaces the `rest_api` crate.
- Add a new `common/eth2` crate which provides a wrapper around `reqwest`, providing the HTTP client that is used by the validator client and for testing. This replaces the `common/remote_beacon_node` crate.
- Create a `http_metrics` crate which is a dedicated server for Prometheus metrics (they are no longer served on the same port as the REST API). We now have flags for `--metrics`, `--metrics-address`, etc.
- Allow the `subnet_id` to be an optional parameter for `VerifiedUnaggregatedAttestation::verify`. This means it does not need to be provided unnecessarily by the validator client.
- Move `fn map_attestation_committee` in `mod beacon_chain::attestation_verification` to a new `fn with_committee_cache` on the `BeaconChain` so the same cache can be used for obtaining validator duties.
- Add some other helpers to `BeaconChain` to assist with common API duties (e.g., `block_root_at_slot`, `head_beacon_block_root`).
- Change the `NaiveAggregationPool` so it can index attestations by `hash_tree_root(attestation.data)`. This is a requirement of the API.
- Add functions to `BeaconChainHarness` to allow it to create slashings and exits.
- Allow for `eth1::Eth1NetworkId` to go to/from a `String`.
- Add functions to the `OperationPool` to allow getting all objects in the pool.
- Add function to `BeaconState` to check if a committee cache is initialized.
- Fix bug where `seconds_per_eth1_block` was not transferring over from `YamlConfig` to `ChainSpec`.
- Add the `deposit_contract_address` to `YamlConfig` and `ChainSpec`. We needed to be able to return it in an API response.
- Change some uses of serde `serialize_with` and `deserialize_with` to a single use of `with` (code quality).
- Impl `Display` and `FromStr` for several BLS fields.
- Check for clock discrepancy when VC polls BN for sync state (with +/- 1 slot tolerance). This is not intended to be comprehensive, it was just easy to do.
- See #1434 for a per-endpoint overview.
- Seeking clarity here: https://github.com/ethereum/eth2.0-APIs/issues/75
- [x] Add docs for prom port to close#1256
- [x] Follow up on this #1177
- [x] ~~Follow up with #1424~~ Will fix in future PR.
- [x] Follow up with #1411
- [x] ~~Follow up with #1260~~ Will fix in future PR.
- [x] Add quotes to all integers.
- [x] Remove `rest_types`
- [x] Address missing beacon block error. (#1629)
- [x] ~~Add tests for lighthouse/peers endpoints~~ Wontfix
- [x] ~~Follow up with validator status proposal~~ Tracked in #1434
- [x] Unify graffiti structs
- [x] ~~Start server when waiting for genesis?~~ Will fix in future PR.
- [x] TODO in http_api tests
- [x] Move lighthouse endpoints off /eth/v1
- [x] Update docs to link to standard
- ~~Blocked on #1586~~
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Closes#1487Closes#1427
Directory restructure in accordance with #1487. Also has temporary migration code to move the old directories into new structure.
Also extracts all default directory names and utility functions into a `directory` crate to avoid repetitio.
~Since `validator_definition.yaml` stores absolute paths, users will have to manually change the keystore paths or delete the file to get the validators picked up by the vc.~. `validator_definition.yaml` is migrated as well from the default directories.
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
- Resolves#1313
## Proposed Changes
Changes the way we start the validator client and beacon node to ensure that we cleanly drop the validator keystores (which therefore ensures we cleanup their lockfiles).
Previously we were holding the validator keystores in a tokio task that was being forcefully killed (i.e., without `Drop`). Now, we hold them in a task that can gracefully handle a shutdown.
Also, switches the `--strict-lockfiles` flag to `--delete-lockfiles`. This means two things:
1. We are now strict on lockfiles by default (before we weren't).
1. There's a simple way for people delete the lockfiles if they experience a crash.
## Additional Info
I've only given the option to ignore *and* delete lockfiles, not just ignore them. I can't see a strong need for ignore-only but could easily add it, if the need arises.
I've flagged this as `api-breaking` since users that have lockfiles lingering around will be required to supply `--delete-lockfiles` next time they run.
## Issue Addressed
Closes#1680
## Proposed Changes
This PR fixes a race condition in beacon node start-up whereby the pubkey cache could be created by the beacon chain builder before the `PersistedBeaconChain` was stored to disk. When the node restarted, it would find the persisted chain missing, and attempt to start from scratch, creating a new pubkey cache in the process. This call to `ValidatorPubkeyCache::new` would fail if the file already existed (which it did). I changed the behaviour so that pubkey cache initialization now doesn't care whether there's a file already in existence (it's only a cache after all). Instead it will truncate and recreate the file in the race scenario described.
## Issue Addressed
NA
## Proposed Changes
There are four new conditions introduced in v0.12.3:
1. _[REJECT]_ The attestation's epoch matches its target -- i.e. `attestation.data.target.epoch ==
compute_epoch_at_slot(attestation.data.slot)`
1. _[REJECT]_ The attestation's target block is an ancestor of the block named in the LMD vote -- i.e.
`get_ancestor(store, attestation.data.beacon_block_root, compute_start_slot_at_epoch(attestation.data.target.epoch)) == attestation.data.target.root`
1. _[REJECT]_ The committee index is within the expected range -- i.e. `data.index < get_committee_count_per_slot(state, data.target.epoch)`.
1. _[REJECT]_ The number of aggregation bits matches the committee size -- i.e.
`len(attestation.aggregation_bits) == len(get_beacon_committee(state, data.slot, data.index))`.
This PR implements new logic to suit (1) and (2). Tests are added for (3) and (4), although they were already implicitly enforced.
## Additional Info
- There's a bit of edge-case with target root verification that I raised here: https://github.com/ethereum/eth2.0-specs/pull/2001#issuecomment-699246659
- I've had to add an `--ignore` to `cargo audit` to get CI to pass. See https://github.com/sigp/lighthouse/issues/1669
## Issue Addressed
#629
## Proposed Changes
This removes banned peers from the DHT and informs discovery to block the node_id and the known source IP's associated with this node. It has the capabilities of un banning this peer after a period of time.
This also corrects the logic about banning specific IP addresses. We now use seen_ip addresses from libp2p rather than those sent to us via identify (which also include local addresses).
## Issue Addressed
In principle.. closes#1551 but in general are improvements for performance, maintainability and readability. The logic for the optimistic sync in actually simple
## Proposed Changes
There are miscellaneous things here:
- Remove unnecessary `BatchProcessResult::Partial` to simplify the batch validation logic
- Make batches a state machine. This is done to ensure batch state transitions respect our logic (this was previously done by moving batches between `Vec`s) and to ease the cognitive load of the `SyncingChain` struct
- Move most batch-related logic to the batch
- Remove `PendingBatches` in favor of a map of peers to their batches. This is to avoid duplicating peers inside the chain (peer_pool and pending_batches)
- Add `must_use` decoration to the `ProcessingResult` so that chains that request to be removed are handled accordingly. This also means that chains are now removed in more places than before to account for unhandled cases
- Store batches in a sorted map (`BTreeMap`) access is not O(1) but since the number of _active_ batches is bounded this should be fast, and saves performing hashing ops. Batches are indexed by the epoch they start. Sorted, to easily handle chain advancements (range logic)
- Produce the chain Id from the identifying fields: target root and target slot. This, to guarantee there can't be duplicated chains and be able to consistently search chains by either Id or checkpoint
- Fix chain_id not being present in all chain loggers
- Handle mega-edge case where the processor's work queue is full and the batch can't be sent. In this case the chain would lose the blocks, remain in a "syncing" state and waiting for a result that won't arrive, effectively stalling sync.
- When a batch imports blocks or the chain starts syncing with a local finalized epoch greater that the chain's start epoch, the chain is advanced instead of reset. This is to avoid losing download progress and validate batches faster. This also means that the old `start_epoch` now means "current first unvalidated batch", so it represents more accurately the progress of the chain.
- Batch status peers from the same chain to reduce Arc access.
- Handle a couple of cases where the retry counters for a batch were not updated/checked are now handled via the batch state machine. Basically now if we forget to do it, we will know.
- Do not send back the blocks from the processor to the batch. Instead register the attempt before sending the blocks (does not count as failed)
- When re-requesting a batch, try to avoid not only the last failed peer, but all previous failed peers.
- Optimize requesting batches ahead in the buffer by shuffling idle peers just once (this is just addressing a couple of old TODOs in the code)
- In chain_collection, store chains by their id in a map
- Include a mapping from request_ids to (chain, batch) that requested the batch to avoid the double O(n) search on block responses
- Other stuff:
- impl `slog::KV` for batches
- impl `slog::KV` for syncing chains
- PSA: when logging, we can use `%thing` if `thing` implements `Display`. Same for `?` and `Debug`
### Optimistic syncing:
Try first the batch that contains the current head, if the batch imports any block, advance the chain. If not, if this optimistic batch is inside the current processing window leave it there for future use, if not drop it. The tolerance for this block is the same for downloading, but just once for processing
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
N/A
## Proposed Changes
Prevent subscribing to core gossipsub topics until after we have achieved a full sync. This prevents us censoring gossipsub channels, getting penalised in gossipsub 1.1 scoring and saves us computation time in attempting to validate gossipsub messages which we will be unable to do with a non-sync'd chain.
## Issue Addressed
Closes#1472
## Proposed Changes
Add `--staking` ~~and`staking-with-eth1-endpoint`~~ flag to improve UX for stakers.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
- Resolves#1080
## Proposed Changes
- Call `update_pubkey_cache` only in the `build_all_caches` method and `get_validator_index` method.
## Additional Info
This does reduce the number of places the cache is updated, making it simpler. But the `get_validator_index` method is used a couple times when we are iterating through the entire validator registry (or set of active validators). Before, we would only call `update_pubkey_cache` once before iterating through all validators. So I'm not _totally_ sure this change is worth it.
## Issue Addressed
- Resolves#1616
## Proposed Changes
If we look at the function which persists fork choice and the canonical head to disk:
1db8daae0c/beacon_node/beacon_chain/src/beacon_chain.rs (L234-L280)
There is a race-condition which might cause the canonical head and fork choice values to be out-of-sync.
I believe this is the cause of #1616. I managed to recreate the issue and produce a database that was unable to sync under the `master` branch but able to sync with this branch.
These new changes solve the issue by ignoring the persisted `canonical_head_block_root` value and instead getting fork choice to generate it. This ensures that the canonical head is in-sync with fork choice.
## Additional Info
This is hotfix method that leaves some crusty code hanging around. Once this PR is merged (to satisfy the v0.2.x users) we should later update and merge #1638 so we can have a clean fix for the v0.3.x versions.
## Issue Addressed
N/A
## Proposed Changes
Shifts the local `metadata` to `network_globals` making it accessible to the HTTP API and other areas of lighthouse.
## Additional Info
N/A
## Issue Addressed
N/A
## Proposed Changes
Adds the following check from the spec
> A reader SHOULD NOT read more than max_encoded_len(n) bytes after reading the SSZ length-prefix n from the header.
## Issue Addressed
- Resolves#1616
## Proposed Changes
Fixes a bug where we are unable to read the finalized block from fork choice.
## Detail
I had made an assumption that the finalized block always has a parent root of `None`:
e5fc6bab48/consensus/fork_choice/src/fork_choice.rs (L749-L752)
This was a faulty assumption, we don't set parent *roots* to `None`. Instead we *sometimes* set parent *indices* to `None`, depending if this pruning condition is satisfied:
e5fc6bab48/consensus/proto_array/src/proto_array.rs (L229-L232)
The bug manifested itself like this:
1. We attempt to get the finalized block from fork choice
1. We try to check that the block is descendant of the finalized block (note: they're the same block).
1. We expect the parent root to be `None`, but it's actually the parent root of the finalized root.
1. We therefore end up checking if the parent of the finalized root is a descendant of itself. (note: it's an *ancestor* not a *descendant*).
1. We therefore declare that the finalized block is not a descendant of (or eq to) the finalized block. Bad.
## Additional Info
In reflection, I made a poor assumption in the quest to obtain a probably negligible performance gain. The performance gain wasn't worth the risk and we got burnt.
## Issue Addressed
N/A
## Proposed Changes
This will consider all gossipsub messages that have either the `from`, `seqno` or `signature` field as invalid.
## Additional Info
We should not merge this until all other clients have been sending empty fields for a while.
See https://github.com/ethereum/eth2.0-specs/issues/1981 for reference
## Issue Addressed
https://github.com/ethereum/eth2.0-specs/pull/2044
## Proposed Changes
Shifts the gossipsub message id to use the first 8 bytes of the SHA256 hash of the gossipsub message data field.
## Additional Info
We should merge this in once the spec has been decided on. It will cause issues with gossipsub scoring and gossipsub propagation rates (as we won't receive IWANT) messages from clients that also haven't made this update.
## Issue Addressed
#1590
## Proposed Changes
This is a temporary workaround that prevents finalized chain sync from swapping chains. I'm merging this in now until the full solution is ready.
## Issue Addressed
Malicious users could request very large block ranges, more than we expect. Although technically legal, we are now quadraticaly weighting large step sizes in the filter. Therefore users may request large skips, but not a large number of blocks, to prevent requests forcing us to do long chain lookups.
## Proposed Changes
Weight the step parameter in the RPC filter and prevent any overflows that effect us in the step parameter.
## Additional Info
## Issue Addressed
Closes#1365
## Proposed Changes
Dial peers in the `cached_enrs` who aren't connected, aren't banned and satisfy the subnet predicate before making a subnet discovery query.
## Issue Addressed
Partly addresses #1547
## Proposed Changes
This fix addresses the missing attestations at slot 0 of an epoch (also sometimes slot 1 when slot 0 was skipped).
There are 2 cases:
1. BN receives the block for the attestation slot after 4 seconds (1/3rd of the slot).
2. No block is proposed for this slot.
In both cases, when we produce the attestation, we pass the head state to the
`produce_unaggregated_attestation_for_block` function here
9833eca024/beacon_node/beacon_chain/src/beacon_chain.rs (L845-L850)
Since we don't advance the state in this function, we set `attestation.data.source = state.current_justified_checkpoint` which is atleast 2 epochs lower than current_epoch(wall clock epoch).
This attestation is invalid and cannot be included in a block because of this assert from the spec:
```python
if data.target.epoch == get_current_epoch(state):
assert data.source == state.current_justified_checkpoint
state.current_epoch_attestations.append(pending_attestation)
```
https://github.com/ethereum/eth2.0-specs/blob/dev/specs/phase0/beacon-chain.md#attestations
This PR changes the `produce_unaggregated_attestation_for_block` function to ensure that it advances the state before producing the attestation at the new epoch.
Running this on my node, have missed 0 attestations across all 8 of my validators in a 100 epoch period 🎉
To compare, I was missing ~14 attestations across all 8 validators in the same 100 epoch period before the fix.
Will report missed attestations if any after running for another 100 epochs tomorrow.
## Issue Addressed
#1421
## Proposed Changes
Bounding the error_message that can be returned for RPC domain errors
Co-authored-by: Age Manning <Age@AgeManning.com>
Converts the graffiti binary data to string before printing to logs.
## Issue Addressed
#1566
## Proposed Changes
Rather than converting graffiti to a vector the binary data less the last character is passed to String::from_utf_lossy(). This then allows us to call the to_string() function directly to give us the string
## Additional Info
Rust skills are fairly weak
## Issue Addressed
N/A
## Proposed Changes
Adds extended metrics to get a better idea of what is happening at the gossipsub layer of lighthouse. This provides information about mesh statistics per topics, subscriptions and peer scores.
## Additional Info
## Issue Addressed
Fixes#1509
## Proposed Changes
Exit the beacon node if the eth1 endpoint points to an invalid eth1 network. Check the network id before every eth1 cache update and display an error log if the network id has changed to an invalid one.
## Issue Addressed
#1172
## Proposed Changes
* updates the libp2p dependency
* small adaptions based on changes in libp2p
* report not just valid messages but also invalid and distinguish between `IGNORE`d messages and `REJECT`ed messages
Co-authored-by: Age Manning <Age@AgeManning.com>
The PR:
* Adds the ability to generate a crucial test scenario that isn't possible with `BeaconChainHarness` (i.e. two blocks occupying the same slot; previously forks necessitated skipping slots):
* New testing API: Instead of repeatedly calling add_block(), you generate a sorted `Vec<Slot>` and leave it up to the framework to generate blocks at those slots.
* Jumping backwards to an earlier epoch is a hard error, so that tests necessarily generate blocks in a epoch-by-epoch manner.
* Configures the test logger so that output is printed on the console in case a test fails. The logger also plays well with `--nocapture`, contrary to the existing testing framework
* Rewrites existing fork pruning tests to use the new API
* Adds a tests that triggers finalization at a non epoch boundary slot
* Renamed `BeaconChainYoke` to `BeaconChainTestingRig` because the former has been too confusing
* Fixed multiple tests (e.g. `block_production_different_shuffling_long`, `delete_blocks_and_states`, `shuffling_compatible_simple_fork`) that relied on a weird (and accidental) feature of the old `BeaconChainHarness` that attestations aren't produced for epochs earlier than the current one, thus masking potential bugs in test cases.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Closes#1488
## Proposed Changes
* Prevent the pruning algorithm from over-eagerly deleting states at skipped slots when they are shared with the canonical chain.
* Add `debug` logging to the pruning algorithm so we have so better chance of debugging future issues from logs.
* Modify the handling of the "finalized state" in the beacon chain, so that it's always the state at the first slot of the finalized epoch (previously it was the state at the finalized block). This gives database pruning a clearer and cleaner view of things, and will marginally impact the pruning of the op pool, observed proposers, etc (in ways that are safe as far as I can tell).
* Remove duplicated `RevertedFinalizedEpoch` check from `after_finalization`
* Delete useless and unused `max_finality_distance`
* Add tests that exercise pruning with shared states at skip slots
* Delete unnecessary `block_strategy` argument from `add_blocks` and friends in the test harness (will likely conflict with #1380 slightly, sorry @adaszko -- but we can fix that)
* Bonus: add a `BeaconChain::with_head` method. I didn't end up needing it, but it turned out quite nice, so I figured we could keep it?
## Additional Info
Any users who have experienced pruning errors on Medalla will need to resync after upgrading to a release including this change. This should end unbounded `chain_db` growth! 🎉
## Issue Addressed
NA
## Proposed Changes
Shift practically all HTTP endpoint handlers to the blocking executor (some very light tasks are left on the core executor).
## Additional Info
This PR covers the `rest_api` which will soon be refactored to suit the standard API. As such, I've cut a few corners and left some existing issues open in this patch. What I have done here should leave the API in state that is not necessary *exactly* the same, but good enough for us to run validators with. Specifically, the number of blocking workers that can be spawned is unbounded and I have not implemented a queue; this will need to be fixed when we implement the standard API.
## Issue Addressed
#1378
## Proposed Changes
Boot node reuses code from beacon_node to initialize network config. This also enables using the network directory to store/load the enr and the private key.
## Additional Info
Note that before this PR the port cli arguments were off (the argument was named `enr-port` but used as `boot-node-enr-port`).
Therefore as port always the cli port argument was used (for both enr and listening). Now the enr-port argument can be used to overwrite the listening port as the public port others should connect to.
Last but not least note, that this restructuring reuses `ethlibp2p::NetworkConfig` that has many more options than the ones used in the boot node. For example the network config has an own `discv5_config` field that gets never used in the boot node and instead another `Discv5Config` gets created later in the boot node process.
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
#1283
## Proposed Changes
All peers with the same IP will be considered banned as long as there are more than 5 (constant) peers with this IP that have a score below the ban threshold. As soon as some of those 5 peers get unbanned (through decay) and if there are then less than 5 peers with a score below the threshold the IP will be considered not banned anymore.
## Issue Addressed
N/A
## Proposed Changes
Refactor attestation service to send out requests to find peers for subnets as soon as we get attestation duties.
Earlier, we had much more involved logic to send the discovery requests to the discovery service only 6 slots before the attestation slot. Now that discovery is much smarter with grouped queries, the complexity in attestation service can be reduced considerably.
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
#1494
## Proposed Changes
- Give the TaskExecutor the sender side of a channel that a task can clone to request shutting down
- The receiver side of this channel is in environment and now we block until ctrl+c or an internal shutdown signal is received
- The swarm now informs when it has reached 0 listeners
- The network receives this message and requests the shutdown
## Issue Addressed
NA
## Proposed Changes
- Refactors the `BeaconProcessor` to remove some excessive nesting and file bloat
- Sorry about the noise from this, it's all contained in 4d3f8c5 though.
- Adds exits, proposer slashings, attester slashings to the `BeaconProcessor` so we don't get overwhelmed with large amounts of slashings (which happened a few hours ago).
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Sets the default max skips to 700 so that it can cover the 693 slot skip from `80894 - 80201`.
## Additional Info
NA
## Description
This PR improves some logging for the end-user.
It downgrades some warning logs and removes the slots per second sync speed if we are syncing and the speed is 0. This is likely because we are syncing from a finalised checkpoint and the head doesn't change.
## Issue Addressed
NA
## Proposed Changes
- Fixes a mistake I made in #1530 which resulted us in *not* rejecting attestations that we intended to reject.
- Adds skip-slot checks for blocks earlier in import process, so it rejects gossip and RPC blocks.
## Additional Info
NA
## Description
There can be many head chains queued up to complete. Currently we try and process all of these to completion before we consider the node synced.
In a chaotic network, there can be many of these and processing them to completion can be very expensive and slow. This PR removes any non-syncing head chains from the queue, and re-status's the peers. If, after we have synced to head on one chain, there is still a valid head chain to download, it will be re-established once the status has been returned.
This should assist with getting nodes to sync on medalla faster.
## Overview
There are forked chains which get referenced by blocks and attestations on a network. Typically if these chains are very long, we stop looking up the chain and downvote the peer. In extreme circumstances, many peers are on many chains, the chains can be very deep and become time consuming performing lookups.
This PR adds a cache to known failed chain lookups. This prevents us from starting a parent-lookup (or stopping one half way through) if we have attempted the chain lookup in the past.
## Description
Currently lighthouse load-balances across peers a single finalized chain. The chain is selected via the most peers. Once synced to the latest finalized epoch Lighthouse creates chains amongst its peers and syncs them all in parallel amongst each peer (grouped by their current head block).
This is typically fast and relatively efficient under normal operations. However if the chain has not finalized in a long time, the head chains can grow quite long. Peer's head chains will update every slot as new blocks are added to the head. Syncing all head chains in parallel is a bottleneck and highly inefficient in block duplication leads to RPC timeouts when attempting to handle all new heads chains at once.
This PR limits the parallelism of head syncing chains to 2. We now sync at most two head chains at a time. This allows for the possiblity of sync progressing alongside a peer being slow and holding up one chain via RPC timeouts.
The changes are somewhat simple but should solve two issues:
- When quickly changing between chains once and a second time back again, batchIds would collide and cause havoc.
- If we got an out of range response from a peer, sync would remain in syncing but without advancing
Changes:
- remove the batch id. Identify each batch (inside a chain) by its starting epoch. Target epochs for downloading and processing now advance by EPOCHS_PER_BATCH
- for the same reason, move the "to_be_downloaded_id" to be an epoch
- remove a sneaky line that dropped an out of range batch without downloading it
- bonus: put the chain_id in the log given to the chain. This is why explicitly logging the chain_id is removed
## Proposed Changes
To mitigate the impact of minority forks on RAM and disk usage, this change rejects blocks whose parent lies more than 320 slots (10 epochs, ~1 hour) in the past. The behaviour is configurable via `lighthouse bn --max-skip-slots N`, and can be turned off entirely using `--max-skip-slots none`.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
Moves beacon block processing over to the newly-added `GossipProcessor`. This moves the task off the core executor onto the blocking one.
## Additional Info
- With this PR, gossip blocks are being ignored during sync.
## Issue Addressed
NA
## Proposed Changes
- Adds a new function to allow getting a state with a bad state root history for attestation verification. This reduces unnecessary tree hashing during attestation processing, which accounted for 23% of memory allocations (by bytes) in a recent `heaptrack` observation.
- Don't clone caches on intermediate epoch-boundary states during block processing.
- Reject blocks that are known to fork choice earlier during gossip processing, instead of waiting until after state has been loaded (this only happens in edge-case).
- Avoid multiple re-allocations by creating a "forced" exact size iterator.
## Additional Info
NA
## Issue Addressed
There is currently an issue with yamux when connecting to prysm peers. The source of the issue is currently unknown.
This PR removes yamux support to force mplex negotation. We can add back yamux support once we have isolated and corrected the issue.
## Issue Addressed
Resolves#1489
## Proposed Changes
- Change starting metadata seq num to 0 according to the [spec](https://github.com/ethereum/eth2.0-specs/blob/dev/specs/phase0/p2p-interface.md#metadata).
- Remove metadata field from `NetworkGlobals`
- Persist metadata to disk on every update
- Load metadata seq number from disk on restart
- Persist enr to disk on update to ensure enr sequence number increments are persisted as well.
## Additional info
Since we modified starting metadata seq num to 0 from 1, we might still see `Invalid Sequence number provided` like in #1489 from prysm nodes if they have our metadata cached.
## Issue Addressed
#1384
Only catch, as currently implemented, when dialing the multiaddr nodes, there is no way to ask the peer manager if they are already connected or dialing
## Discovery v5 update
In this update we remove the openssl dependency in favour of rust-crypto.
The update also removes a series of unnecessary async functions which may improve some of the issues we have been experiencing.
## Issue Addressed
- Resolves#1451
## Proposed Changes
- Restricts the `contains_block` and `contains_block` so they only indicate a block is present if it descends from the finalized root. This helps to ensure that fork choice never points to a block that has been pruned from the database.
- Resolves#1451
- Before importing a block, double-check that its parent is known and a descendant of the finalized root.
- Split a big, monolithic block verification test into smaller tests.
## Additional Notes
I suspect there would be a craftier way to do the `is_descendant_of_finalized` check, but we're a bit tight on time now and we can optimize later if it starts showing in benches.
## TODO
- [x] Tests
## Issue Addressed
N/A
## Proposed Changes
Introduces the `GossipProcessor`, a multi-threaded (multi-tasked?), non-blocking processor for some messages from the network which require verification and import into the `BeaconChain`.
Initial testing indicates that this massively improves system stability by (a) moving block tasks from the normal executor (b) spreading out attestation load.
## Additional Info
TBC
These started to appear when I `^C` `curl -N http://localhost:5052/beacon/fork/stream`: `Aug 12 13:00:01.539 ERRO Couldn't stream piece hyper::Error(ChannelClosed), service: http`
Something must have changed in hyper since SSE has been implemented because I'm sure I haven't seen those errors before.
This PR properly detects a closed SSE stream and cleans up.
## Issue Addressed
NA
## Proposed Changes
Adds support for using the [`cross`](https://github.com/rust-embedded/cross) project to produce cross-compiled binaries using Docker images.
Provides quite clean and simple cross-compiles cause all the complexity is hidden in Dockerfiles. It does require you to be in the `docker` group though.
## Details
- Adds shortcut commands to `Makefile`
- Ensures `reqwest` and `discv5` use vendored openssl libs (i.e., static not shared).
- Switches to a [commit](284f705964) of blst that has a renamed C function to avoid a collision with openssl (upstream issue: https://github.com/supranational/blst/issues/21).
- Updates `ring` to the latest satisfiable version, since an earlier version was causing issues with `cross`.
- Off-topic, but adds extra message about Windows support as suggested by Discord user.
## Additional Info
- ~~Blocked on #1495~~
- There are no tests in CI for this yet for a few reasons:
- I'm hesitant to add more long-running tasks.
- Short-term bitrot should be avoided since we'll use it each release.
- In the long term I think it would be good to automate binary creation on a release.
- I observed the binaries increase in size from 50mb to 52mb after these changes.
limit simultaneous outgoing connections attempts to a reasonable top as an extra layer of protection
also shift the keep alive logic of the rpc handler to avoid needing to update it by hand. I think In rare cases this could make shutting down a connection a bit faster.
## Issue Addressed
#1419
## Proposed Changes
Creates a `--graffiti` cli flag in the validator client. If the flag is set, it overrides graffiti in the beacon node.
## Additional Info
## Issue Addressed
#1483
## Proposed Changes
Upgrades the log to a critical if a listener fails. We are able to listen on many interfaces so a single instance is not critical. We should however gracefully shutdown the client if we have no listeners, although the client can still function solely on outgoing connections.
For now a critical is raised and I leave #1494 for more sophisticated handling of this.
This also updates discv5 to handle errors of binding to a UDP socket such that lighthouse is now able to handle them.
## Issue Addressed
Some nodes not following head, high CPU usage and HTTP API delays
## Proposed Changes
Patches gossipsub. Gossipsub was using an `lru_time_cache` to check for duplicates. This contained an `O(N)` lookup for every gossipsub message to update the time cache. This was causing high cpu usage and blocking network threads.
This PR introduces a custom cache without `O(N)` inserts.
This also adds built in safety mechanisms to prevent gossipsub from excessively retrying connections upon failure. A maximum limit is set after which we disconnect from the node from too many failed substream connections.
## Issue Addressed
Peers that connected after the peer limit may remain connected in some circumstances.
This ensures peers not in the peer manager's list get disconnected. Further logging is also added to track this behaviour.
## Issue Addressed
NA
## Proposed Changes
- When producing a block, go and ensure every attestation in the naive aggregation pool is included in the operation pool. This should help us increase the number of useful attestations in a block.
- Lift the `RwLock`s inside `NaiveAggregationPool` up into a single high-level lock. There were race conditions in the existing setup and it was hard to reason about.
## Additional Info
NA
## Issue Addressed
#1028
A bit late, but I think if `BlockError` had a kind (the current `BlockError` minus everything on the variants that comes directly from the block) and the original block, more clones could be removed
## Issue Addressed
NA
## Proposed Changes
- Moves the git-based versioning we were doing into the `lighthouse_version` crate in `common`.
- Removes the `beacon_node/version` crate, replacing it with `lighthouse_version`.
- Bumps the version to `v0.2.0`.
## Additional Info
There are now two types of version string:
1. `const VERSION: &str = Lighthouse/v0.2.0-1419501f2+`
1. `version_with_platform() = Lighthouse/v0.2.0-1419501f2+/x86_64-linux`
(1) is handy cause it's a `const` and shorter. (2) has platform info so it's more useful. Note that the plus-sign (`+`) indicates the the git commit is dirty (it used to be `(modified)` but I had to shorten it to fit into graffiti).
These version strings are now included on:
- `lighthouse --version`
- `lcli --version`
- `curl localhost:5052/node/version`
- p2p messages when we communicate our version
You can update the version by changing this constant (version is not related to a `Cargo.toml`):
b9ad7102d5/common/lighthouse_version/src/lib.rs (L4-L15)
## Issue Addressed
Sync was breaking occasionally. The root cause appears to be identify crashing as events we being sent to the protocol after nodes were banned. Have not been able to reproduce sync issues since this update.
## Proposed Changes
Only send messages to sub-behaviour protocols if the peer manager thinks the peer is connected. All other messages are dropped.
## Issue Addressed
The most recent gossipsub update had an issue where some privacy settings lead to not sending a sequence number with the message. Although Lighthouse treats these as valid (based on current configuration) other clients may not.
This corrects gossipsub to send sequence numbers where expected and based on the configuration settings.
## Issue Addressed
#1056
## Proposed Changes
- Add a rate limiter to the RPC behaviour. This also means the rate limiting occurs just before the door to the application level, so the number of connections a peer opens does not affect this (this would happen in the future if put on the handler)
- The algorithm used is the leaky bucket as a meter / token bucket implemented the GCRA way
- Each protocol has its own limit. Due to the way the algorithm works, the "small" protocols have a hard limit, while bbrange and bbroot allow [burstiness](https://www.wikiwand.com/en/Burstiness). This is so that a peer can't request hundreds of individual requests expecting only one block in a short period of time, it also allows a peer to send two half size requests instead of one with max if they want to without getting limited, and.. it also allows a peer to request a batch of the maximum size and then send _appropriately spaced_ requests of really small sizes. From what I've seen in sync this is plausible when reaching the target slot.
## Additional Info
Needs to be heavily tested
## Issue Addressed
NA
## Proposed Changes
Allows for multiple "hardcoded" testnets.
## Additional Info
This PR is incomplete.
## TODO
- [x] Add flag to CLI, integrate with rest of Lighthouse.
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Recurring sync loop and invalid batch downloading
## Proposed Changes
Shifts the batches to include the first slot of each epoch. This ensures the finalized is always downloaded once a chain has completed syncing.
Also add in logic to prevent re-dialing disconnected peers. Non-performant peers get disconnected during sync, this prevents re-connection to these during sync.
## Additional Info
N/A
## Issue Addressed
N/A
## Proposed Changes
This provides a number of corrections and improvements to gossipsub. Specifically
- Enables options for greater privacy around the message author
- Provides greater flexibility on message validation
- Prevents unvalidated messages from being gossiped
- Shifts the duplicate cache to a time-based cache inside gossipsub
- Updates the message-id to handle bytes
- Bug fixes related to mesh maintenance and topic subscription. This should improve our attestation inclusion rate.
## Issue Addressed
#1388 partially (eth2_libp2p & network)
## Proposed Changes
TLDR at the end
- *Complex types* are 3 on the handlers/Behaviours but the types are `Poll<ComplexType>` where `ComplexType` comes from the traits of libp2p. Those, I don't thing are worth an alias. A couple more were from using tokio combinators and were removed writing things the async way and using [`BoxFuture`](https://docs.rs/futures/0.3.5/futures/future/type.BoxFuture.html)
- The *cognitive complexity*.. I tried to address those before (they come from the poll functions too) and tbh they are cognitively simpler to understand the way they are now. Moving separate parts to functions doesn't add much since that code is not repeated and they all do early returns. If moved those returns would now need to be wrapped in an Option, probably, and checked to be returned again. I would leave them like that but that's just preference.
- *Too many arguments*: They are not easily put together in a wrapping struct since the parameters don't relate semantically (Ex: fn new with a log, a reference to the chain, a peer, etc) but some may differ.
- *Needless returns* were indeed needless
## Additional Info
TLDR: removed needless return, used BoxFuture and async, left the rest untouched since those lgtm
## Issue Addressed
NA
## Proposed Changes
Adds a `valid_deposits` field to the logs whilst waiting for genesis:
```
Jul 25 11:02:25.631 INFO Waiting for more deposits valid_deposits: 3085, total_deposits: 3188, min_genesis_active_validators: 16384, service: beacon
```
In this example we can see there are `3188` deposits, but only `3085` have valid signatures.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
- Refactor the `bls` crate to support multiple BLS "backends" (e.g., milagro, blst, etc).
- Removes some duplicate, unused code in `common/rest_types/src/validator.rs`.
- Removes the old "upgrade legacy keypairs" functionality (these were unencrypted keys that haven't been supported for a few testnets, no one should be using them anymore).
## Additional Info
Most of the files changed are just inconsequential changes to function names.
## TODO
- [x] Optimization levels
- [x] Infinity point: https://github.com/supranational/blst/issues/11
- [x] Ensure milagro *and* blst are tested via CI
- [x] What to do with unsafe code?
- [x] Test infinity point in signature sets
## Issue Addressed
#1112
The logic is slightly different but still valid wrt to error handling.
- Inbound state is either Busy with a future that return the subtream (and info about the processing)
- The state machine works as follows:
- `Idle` with pending responses => `Busy`
- `Busy` => finished ? if so and there are new pending responses then `Busy`, if not then `Idle`
=> not finished remains `Busy`
- Add an `InboundInfo` for readability
- Other stuff:
- Close inbound substreams when all expected responses are sent
- Remove the error variants from `RPCCodedResponse` and use the codes instead
- Fix various spelling mistakes because I got sloppy last time
Sorry for the delay
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
N/A
## Proposed Changes
When parsing deposit logs, we were returning an error in case `PublicKeyBytes` or `SignatureBytes` didn't convert to valid bls `PublicKey` or `Signature` types. This would stall our import of deposit logs.
Fixes this by returning `signature_is_valid` as `false` in `DepositLog` if the bytes are invalid `PublicKey/Signature` types.
Tested this fix on the Onyx deposit contract where the bug was observed and it works correctly as expected.
## Issue Addressed
This PR makes the `Eth1Chain::use_dummy_backend` field private. I believe this could be good to ensure the consistency of a Eth1Chain instance. 💡
## Issue Addressed
https://github.com/sigp/lighthouse/issues/1177
## Proposed Changes
Add a command line option (`--http-allow-origin`) and a config item for configuring the `Access-Control-Allow-Origin` response header. This should unblock making XMLHttpRequests.
Downgrades libp2p and the gossipsub updates.
This looks to resolve the CPU usage issue we have been seeing.
The root cause is likely inside the latest gossipsub updates, which will be addressed in a later PR
## Issue Addressed
Closes#1319
## Proposed Changes
This issue:
1. Allows users to edit their Graffiti via the cli option `--graffiti`. If the graffiti is too long, lighthouse will not start and throw an error message. Otherwise, it will set the Graffiti to be the one provided by the user, right-padded with 0s.
2. Create a new `Graffiti` type and unify the code around it. With this type, everything is enforced at compile-time, and the code can be (I think...) panic-free! :)
## Additional info
Currently, only `&str` are supported, as this is the returned type by `.arg("graffiti")`.
Since this is user-input, I tried being as careful as I could. This is also why I created the `Graffiti` type, to make sure I could check as much as possible at compile time.
* Bake in Altona testnet (without genesis state)
* Add sig verification, without optimization
* Start integration with genesis service
* Update config.yml
* Fix eth2_testnet_config test
* Stop using default spec in genesis
* Fix lcli compile error
* Update min genesis time
* Fix typo
* Process exits and slashings off the network
* Fix rest_api tests
* Add op verification tests
* Add tests for pruning of slashings in the op pool
* Address Paul's review comments
* Update `milagro_bls` to new release (#1183)
* Update milagro_bls to new release
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* Tidy up fake cryptos
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* move SecretHash to bls and put plaintext back
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* Update v0.12.0 to v0.12.1
* Add compute_subnet_for_attestation
* Replace CommitteeIndex topic with Attestation
* Fix warnings
* Fix attestation service tests
* fmt
* Appease clippy
* return error from validator_subscriptions
* move state out of loop
* Fix early break on error
* Get state from slot clock
* Fix beacon state in attestation tests
* Add failing test for lookahead > 1
* Minor change
* Address some review comments
* Add subnet verification to beacon chain
* Move subnet verification to processor
* Pass committee_count_at_slot to ValidatorDuty and ValidatorSubscription
* Pass subnet id for publishing attestations
* Fix attestation service tests
* Fix more tests
* Fix fork choice test
* Remove unused code
* Remove more unused and expensive code
Co-authored-by: Kirk Baird <baird.k@outlook.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Age Manning <Age@AgeManning.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Make all features explicit
* Remove default feature and add missing newline to cargo.toml
* Fix compilation for --feature libp2p-websocket
Signed-off-by: pscott <scottpiriou@gmail.com>
* Remove 'with-arbitrary'
* Layer do_atomically() abstractions properly
* Reduce allocs and DRY get_key_for_col()
* Parameterize HotColdDB with hot and cold item stores
* -impl Store for MemoryStore
* Replace Store uses with HotColdDB
* Ditch Store trait
* cargo fmt
* Style fix
* Readd missing dep that broke the build
* Update `milagro_bls` to new release (#1183)
* Update milagro_bls to new release
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* Tidy up fake cryptos
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* move SecretHash to bls and put plaintext back
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* Update v0.12.0 to v0.12.1
* Remove secio
* Remove ssz encoding for gossipsub
Co-authored-by: Kirk Baird <baird.k@outlook.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Age Manning <Age@AgeManning.com>
* Update `milagro_bls` to new release (#1183)
* Update milagro_bls to new release
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* Tidy up fake cryptos
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* move SecretHash to bls and put plaintext back
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* Update v0.12.0 to v0.12.1
* Use ssz types for Request and error types
* Fix errors
* Constrain BlocksByRangeRequest count to MAX_REQUEST_BLOCKS
* Fix issues after rebasing
* Address review comments
Co-authored-by: Kirk Baird <baird.k@outlook.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Age Manning <Age@AgeManning.com>
* add retry logic to peer discovery and an expiration time for peers
* Restructure discovery
* Add mac build to CI
* Always return an error for Health when not linux
* Change macos workflow
* Rename macos tests
* Update DiscoverPeers messages to pass Instants. Implement PartialEq for AttServiceMessage
* update discover peer queueing to always check existing messages and extend min_ttl as necessary
* update method name and comment
* Correct merge issues
* Add subnet id check to partialeq, fix discover peer message dups
* fix discover peer message dups
* fix discover peer message dups for real this time
Co-authored-by: Age Manning <Age@AgeManning.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* wip: mwake the request id optional
* make the request_id optional
* cleanup
* address clippy lints inside rpc
* WIP: Separate sent RPC events from received ones
* WIP: Separate sent RPC events from received ones
* cleanup
* Separate request ids from substream ids
* Make RPC's message handling independent of RequestIds
* Change behaviour RPC events to be more outside-crate friendly
* Propage changes across the network + router + processor
* Propage changes across the network + router + processor
* fmt
* "tiny" refactor
* more tiny refactors
* fmt eth2-libp2p
* wip: propagating changes
* wip: propagating changes
* cleaning up
* more cleanup
* fmt
* tests HOT fix
Co-authored-by: Age Manning <Age@AgeManning.com>
* Add logging on shutdown
* Replace tokio::spawn with handle.spawn
* Upgrade tokio
* Add a task executor
* Beacon chain tasks use task executor
* Validator client tasks use task executor
* Rename runtime_handle to executor
* Add duration histograms; minor fixes
* Cleanup
* Fix logs
* Fix tests
* Remove random file
* Get enr dependency instead of libp2p
* Address some review comments
* Libp2p takes a TaskExecutor
* Ugly fix libp2p tests
* Move TaskExecutor to own file
* Upgrade Dockerfile rust version
* Minor fixes
* Revert "Ugly fix libp2p tests"
This reverts commit 58d4bb690f52de28d893943b7504d2d0c6621429.
* Pretty fix libp2p tests
* Add spawn_without_exit; change Counter to Gauge
* Tidy
* Move log from RuntimeContext to TaskExecutor
* Fix errors
* Replace histogram with int_gauge for async tasks
* Fix todo
* Fix memory leak in test by exiting all spawned tasks at the end
* Update state processing for v0.12
* Fix EF test runners for v0.12
* Fix some tests
* Fix broken attestation verification test
* More test fixes
* Fix typo found in review
* Add mac build to CI
* Always return an error for Health when not linux
* Change macos workflow
* Rename macos tests
* Disable health API test on Mac
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
* Remove redundant method
* Pull out a method out of a struct
* More precise db access abstractions
* Move fake trait method out of it
* cargo fmt
* Fix compilation error after refactoring
* Move another fake method out the Store trait
* Get rid of superfluous method
* Fix refactoring bug
* Rename: SimpleStoreItem -> StoreItem
* Get rid of the confusing DiskStore type alias
* Get rid of SimpleDiskStore type alias
* Correction: A method took both self and a ref to Self
* Start adding health endpoint
* Use psutil more
* Add get_health test
* Expose health to Prom
* Update comments
* Add /node/health to docs
* Update Prom naming
* expand NetworkBehaviour derive
* add handler placeholder
* add dummy custom handler wrapping the select
* cleanup behaviour's expanded impl of NetworkBehaviour
* cleanup behaviour with macro
* add missing function and clean with macros
* add custom InEvent for Behaviour's handler
* cleanup
* replace InboundProtocol with a "custom" one
* add a delegating handler to put the encapsulate the noice
* partially implement poll for handler
* partially implement poll for handler
* cleanup
* Remove warnings before merge
Co-authored-by: Age Manning <Age@AgeManning.com>
* Adds counter of received chunks to an OutboundSubstream. Ends the stream when the counter reaches the desired amount of chunks that where specified in a Request.
* Keeps track of remaining chunks for a stream, rather than expected ones and calculating the remainder on each received chunk
* WIP test, waiting for stable-futures to land in master
* Improve calculation for remaining chunks in response handler. Improve initial calculation for expected chunks in outbount substream
* Remove rebase artifact
* Fix compiler errors after rebasing on master
* Clone request to allow two accesses to it that move it when determining the amount of expected responses
* Correctly terminate the stream when all chunks have been received
* WIP: test that stream is terminated correctly
* Terminate stream with a termination response. Handle further received chunks in OutboundStream::Closing branch to return errors
* Remove request clone
* Report stream timeouts when closing
* Update rpc test
* Fix BlocksByRoot RPC test to request as many chunks as responses are expected
* Adds test for correctly termined BlocksByRoot rpc stream when all chunks have been received
Co-authored-by: Age Manning <Age@AgeManning.com>
