## Issue Addressed
NA
## Proposed Changes
Adds some more testing for Altair to the op pool. Credits to @michaelsproul for some appropriated efforts here.
## Additional Info
NA
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Proposed Changes
Clone the proposer pubkeys during backfill signature verification to reduce the time that the pubkey cache lock is held for. Cloning such a small number of pubkeys has negligible impact on the total running time, but greatly reduces lock contention.
On a Ryzen 5950X, the setup step seems to take around 180us regardless of whether the key is cloned or not, while the verification takes 7ms. When Lighthouse is limited to 10% of one core using `sudo cpulimit --pid <pid> --limit 10` the total time jumps up to 800ms, but the setup step remains only 250us. This means that under heavy load this PR could cut the time the lock is held for from 800ms to 250us, which is a huge saving of 99.97%!
## Issue Addressed
NA
## Proposed Changes
This PR is near-identical to https://github.com/sigp/lighthouse/pull/2652, however it is to be merged into `unstable` instead of `merge-f2f`. Please see that PR for reasoning.
I'm making this duplicate PR to merge to `unstable` in an effort to shrink the diff between `unstable` and `merge-f2f` by doing smaller, lead-up PRs.
## Additional Info
NA
## Issue Addressed
Fix#2585
## Proposed Changes
Provide a canonical version of test_logger that can be used
throughout lighthouse.
## Additional Info
This allows tests to conditionally emit logging data by adding
test_logger as the default logger. And then when executing
`cargo test --features logging/test_logger` log output
will be visible:
wink@3900x:~/lighthouse/common/logging/tests/test-feature-test_logger (Add-test_logger-as-feature-to-logging)
$ cargo test --features logging/test_logger
Finished test [unoptimized + debuginfo] target(s) in 0.02s
Running unittests (target/debug/deps/test_logger-e20115db6a5e3714)
running 1 test
Sep 10 12:53:45.212 INFO hi, module: test_logger:8
test tests::test_fn_with_logging ... ok
test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.00s
Doc-tests test-logger
running 0 tests
test result: ok. 0 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.00s
Or, in normal scenarios where logging isn't needed, executing
`cargo test` the log output will not be visible:
wink@3900x:~/lighthouse/common/logging/tests/test-feature-test_logger (Add-test_logger-as-feature-to-logging)
$ cargo test
Finished test [unoptimized + debuginfo] target(s) in 0.02s
Running unittests (target/debug/deps/test_logger-02e02f8d41e8cf8a)
running 1 test
test tests::test_fn_with_logging ... ok
test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.00s
Doc-tests test-logger
running 0 tests
test result: ok. 0 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.00s
## Issue Addressed
This PR addresses an issue found by @YorickDowne during testing of v2.0.0-rc.0.
Due to a lack of atomic database writes on checkpoint sync start-up, it was possible for the database to get into an inconsistent state from which it couldn't recover without `--purge-db`. The core of the issue was that the store's anchor info was being stored _before_ the `PersistedBeaconChain`. If a crash occured so that anchor info was stored but _not_ the `PersistedBeaconChain`, then on restart Lighthouse would think the database was unitialized and attempt to compare-and-swap a `None` value, but would actually find the stale info from the previous run.
## Proposed Changes
The issue is fixed by writing the anchor info, the split point, and the `PersistedBeaconChain` atomically on start-up. Some type-hinting ugliness was required, which could possibly be cleaned up in future refactors.
## Issue Addressed
Closes#2528
## Proposed Changes
- Add `BlockTimesCache` to provide block timing information to `BeaconChain`. This allows additional metrics to be calculated for blocks that are set as head too late.
- Thread the `seen_timestamp` of blocks received from RPC responses (except blocks from syncing) through to the sync manager, similar to what is done for blocks from gossip.
## Additional Info
This provides the following additional metrics:
- `BEACON_BLOCK_OBSERVED_SLOT_START_DELAY_TIME`
- The delay between the start of the slot and when the block was first observed.
- `BEACON_BLOCK_IMPORTED_OBSERVED_DELAY_TIME`
- The delay between when the block was first observed and when the block was imported.
- `BEACON_BLOCK_HEAD_IMPORTED_DELAY_TIME`
- The delay between when the block was imported and when the block was set as head.
The metric `BEACON_BLOCK_IMPORTED_SLOT_START_DELAY_TIME` was removed.
A log is produced when a block is set as head too late, e.g.:
```
Aug 27 03:46:39.006 DEBG Delayed head block set_as_head_delay: Some(21.731066ms), imported_delay: Some(119.929934ms), observed_delay: Some(3.864596988s), block_delay: 4.006257988s, slot: 1931331, proposer_index: 24294, block_root: 0x937602c89d3143afa89088a44bdf4b4d0d760dad082abacb229495c048648a9e, service: beacon
```
## Issue Addressed
Resolves#2552
## Proposed Changes
Offers some improvement in inclusion distance calculation in the validator monitor.
When registering an attestation from a block, instead of doing `block.slot() - attesstation.data.slot()` to get the inclusion distance, we now pass the parent block slot from the beacon chain and do `parent_slot.saturating_sub(attestation.data.slot())`. This allows us to give best effort inclusion distance in scenarios where the attestation was included right after a skip slot. Note that this does not give accurate results in scenarios where the attestation was included few blocks after the skip slot.
In this case, if the attestation slot was `b1` and was included in block `b2` with a skip slot in between, we would get the inclusion delay as 0 (by ignoring the skip slot) which is the best effort inclusion delay.
```
b1 <- missed <- b2
```
Here, if the attestation slot was `b1` and was included in block `b3` with a skip slot and valid block `b2` in between, then we would get the inclusion delay as 2 instead of 1 (by ignoring the skip slot).
```
b1 <- missed <- b2 <- b3
```
A solution for the scenario 2 would be to count number of slots between included slot and attestation slot ignoring the skip slots in the beacon chain and pass the value to the validator monitor. But I'm concerned that it could potentially lead to db accesses for older blocks in extreme cases.
This PR also uses the validator monitor data for logging per epoch inclusion distance. This is useful as we won't get inclusion data in post-altair summaries.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
NA
## Proposed Changes
Implements the "union" type from the SSZ spec for `ssz`, `ssz_derive`, `tree_hash` and `tree_hash_derive` so it may be derived for `enums`:
https://github.com/ethereum/consensus-specs/blob/v1.1.0-beta.3/ssz/simple-serialize.md#union
The union type is required for the merge, since the `Transaction` type is defined as a single-variant union `Union[OpaqueTransaction]`.
### Crate Updates
This PR will (hopefully) cause CI to publish new versions for the following crates:
- `eth2_ssz_derive`: `0.2.1` -> `0.3.0`
- `eth2_ssz`: `0.3.0` -> `0.4.0`
- `eth2_ssz_types`: `0.2.0` -> `0.2.1`
- `tree_hash`: `0.3.0` -> `0.4.0`
- `tree_hash_derive`: `0.3.0` -> `0.4.0`
These these crates depend on each other, I've had to add a workspace-level `[patch]` for these crates. A follow-up PR will need to remove this patch, ones the new versions are published.
### Union Behaviors
We already had SSZ `Encode` and `TreeHash` derive for enums, however it just did a "transparent" pass-through of the inner value. Since the "union" decoding from the spec is in conflict with the transparent method, I've required that all `enum` have exactly one of the following enum-level attributes:
#### SSZ
- `#[ssz(enum_behaviour = "union")]`
- matches the spec used for the merge
- `#[ssz(enum_behaviour = "transparent")]`
- maintains existing functionality
- not supported for `Decode` (never was)
#### TreeHash
- `#[tree_hash(enum_behaviour = "union")]`
- matches the spec used for the merge
- `#[tree_hash(enum_behaviour = "transparent")]`
- maintains existing functionality
This means that we can maintain the existing transparent behaviour, but all existing users will get a compile-time error until they explicitly opt-in to being transparent.
### Legacy Option Encoding
Before this PR, we already had a union-esque encoding for `Option<T>`. However, this was with the *old* SSZ spec where the union selector was 4 bytes. During merge specification, the spec was changed to use 1 byte for the selector.
Whilst the 4-byte `Option` encoding was never used in the spec, we used it in our database. Writing a migrate script for all occurrences of `Option` in the database would be painful, especially since it's used in the `CommitteeCache`. To avoid the migrate script, I added a serde-esque `#[ssz(with = "module")]` field-level attribute to `ssz_derive` so that we can opt into the 4-byte encoding on a field-by-field basis.
The `ssz::legacy::four_byte_impl!` macro allows a one-liner to define the module required for the `#[ssz(with = "module")]` for some `Option<T> where T: Encode + Decode`.
Notably, **I have removed `Encode` and `Decode` impls for `Option`**. I've done this to force a break on downstream users. Like I mentioned, `Option` isn't used in the spec so I don't think it'll be *that* annoying. I think it's nicer than quietly having two different union implementations or quietly breaking the existing `Option` impl.
### Crate Publish Ordering
I've modified the order in which CI publishes crates to ensure that we don't publish a crate without ensuring we already published a crate that it depends upon.
## TODO
- [ ] Queue a follow-up `[patch]`-removing PR.
## Issue Addressed
NA
## Proposed Changes
Adds the ability to verify batches of aggregated/unaggregated attestations from the network.
When the `BeaconProcessor` finds there are messages in the aggregated or unaggregated attestation queues, it will first check the length of the queue:
- `== 1` verify the attestation individually.
- `>= 2` take up to 64 of those attestations and verify them in a batch.
Notably, we only perform batch verification if the queue has a backlog. We don't apply any artificial delays to attestations to try and force them into batches.
### Batching Details
To assist with implementing batches we modify `beacon_chain::attestation_verification` to have two distinct categories for attestations:
- *Indexed* attestations: those which have passed initial validation and were valid enough for us to derive an `IndexedAttestation`.
- *Verified* attestations: those attestations which were indexed *and also* passed signature verification. These are well-formed, interesting messages which were signed by validators.
The batching functions accept `n` attestations and then return `n` attestation verification `Result`s, where those `Result`s can be any combination of `Ok` or `Err`. In other words, we attempt to verify as many attestations as possible and return specific per-attestation results so peer scores can be updated, if required.
When we batch verify attestations, we first try to map all those attestations to *indexed* attestations. If any of those attestations were able to be indexed, we then perform batch BLS verification on those indexed attestations. If the batch verification succeeds, we convert them into *verified* attestations, disabling individual signature checking. If the batch fails, we convert to verified attestations with individual signature checking enabled.
Ultimately, we optimistically try to do a batch verification of attestation signatures and fall-back to individual verification if it fails. This opens an attach vector for "poisoning" the attestations and causing us to waste a batch verification. I argue that peer scoring should do a good-enough job of defending against this and the typical-case gains massively outweigh the worst-case losses.
## Additional Info
Before this PR, attestation verification took the attestations by value (instead of by reference). It turns out that this was unnecessary and, in my opinion, resulted in some undesirable ergonomics (e.g., we had to pass the attestation back in the `Err` variant to avoid clones). In this PR I've modified attestation verification so that it now takes a reference.
I refactored the `beacon_chain/tests/attestation_verification.rs` tests so they use a builder-esque "tester" struct instead of a weird macro. It made it easier for me to test individual/batch with the same set of tests and I think it was a nice tidy-up. Notably, I did this last to try and make sure my new refactors to *actual* production code would pass under the existing test suite.
## Issue Addressed
Closes#1891Closes#1784
## Proposed Changes
Implement checkpoint sync for Lighthouse, enabling it to start from a weak subjectivity checkpoint.
## Additional Info
- [x] Return unavailable status for out-of-range blocks requested by peers (#2561)
- [x] Implement sync daemon for fetching historical blocks (#2561)
- [x] Verify chain hashes (either in `historical_blocks.rs` or the calling module)
- [x] Consistency check for initial block + state
- [x] Fetch the initial state and block from a beacon node HTTP endpoint
- [x] Don't crash fetching beacon states by slot from the API
- [x] Background service for state reconstruction, triggered by CLI flag or API call.
Considered out of scope for this PR:
- Drop the requirement to provide the `--checkpoint-block` (this would require some pretty heavy refactoring of block verification)
Co-authored-by: Diva M <divma@protonmail.com>
## Issue Addressed
Related to: #2259
Made an attempt at all the necessary updates here to publish the crates to crates.io. I incremented the minor versions on all the crates that have been previously published. We still might run into some issues as we try to publish because I'm not able to test this out but I think it's a good starting point.
## Proposed Changes
- Add description and license to `ssz_types` and `serde_util`
- rename `serde_util` to `eth2_serde_util`
- increment minor versions
- remove path dependencies
- remove patch dependencies
## Additional Info
Crates published:
- [x] `tree_hash` -- need to publish `tree_hash_derive` and `eth2_hashing` first
- [x] `eth2_ssz_types` -- need to publish `eth2_serde_util` first
- [x] `tree_hash_derive`
- [x] `eth2_ssz`
- [x] `eth2_ssz_derive`
- [x] `eth2_serde_util`
- [x] `eth2_hashing`
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
N/A
## Proposed Changes
Add functionality in the validator monitor to provide sync committee related metrics for monitored validators.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
Missed head votes on attestations is a well-known issue. The primary cause is a block getting set as the head *after* the attestation deadline.
This PR aims to shorten the overall time between "block received" and "block set as head" by:
1. Persisting the head and fork choice *after* setting the canonical head
- Informal measurements show this takes ~200ms
1. Pruning the op pool *after* setting the canonical head.
1. No longer persisting the op pool to disk during `BeaconChain::fork_choice`
- Informal measurements show this can take up to 1.2s.
I also add some metrics to help measure the effect of these changes.
Persistence changes like this run the risk of breaking assumptions downstream. However, I have considered these risks and I think we're fine here. I will describe my reasoning for each change.
## Reasoning
### Change 1: Persisting the head and fork choice *after* setting the canonical head
For (1), although the function is called `persist_head_and_fork_choice`, it only persists:
- Fork choice
- Head tracker
- Genesis block root
Since `BeaconChain::fork_choice_internal` does not modify these values between the original time we were persisting it and the current time, I assert that the change I've made is non-substantial in terms of what ends up on-disk. There's the possibility that some *other* thread has modified fork choice in the extra time we've given it, but that's totally fine.
Since the only time we *read* those values from disk is during startup, I assert that this has no impact during runtime.
### Change 2: Pruning the op pool after setting the canonical head
Similar to the argument above, we don't modify the op pool during `BeaconChain::fork_choice_internal` so it shouldn't matter when we prune. This change should be non-substantial.
### Change 3: No longer persisting the op pool to disk during `BeaconChain::fork_choice`
This change *is* substantial. With the proposed changes, we'll only be persisting the op pool to disk when we shut down cleanly (i.e., the `BeaconChain` gets dropped). This means we'll save disk IO and time during usual operation, but a `kill -9` or similar "crash" will probably result in an out-of-date op pool when we reboot. An out-of-date op pool can only have an impact when producing blocks or aggregate attestations/sync committees.
I think it's pretty reasonable that a crash might result in an out-of-date op pool, since:
- Crashes are fairly rare. Practically the only time I see LH suffer a full crash is when the OOM killer shows up, and that's a very serious event.
- It's generally quite rare to produce a block/aggregate immediately after a reboot. Just a few slots of runtime is probably enough to have a decent-enough op pool again.
## Additional Info
Credits to @macladson for the timings referenced here.
## Issue Addressed
Closes#2526
## Proposed Changes
If the head block fails to decode on start up, do two things:
1. Revert all blocks between the head and the most recent hard fork (to `fork_slot - 1`).
2. Reset fork choice so that it contains the new head, and all blocks back to the new head's finalized checkpoint.
## Additional Info
I tweaked some of the beacon chain test harness stuff in order to make it generic enough to test with a non-zero slot clock on start-up. In the process I consolidated all the various `new_` methods into a single generic one which will hopefully serve all future uses 🤞
## Issue Addressed
Which issue # does this PR address?
## Proposed Changes
- Add a counter metric to log when a block is received late from gossip.
- Also push a `DEBG` log for the above condition.
- Use Debug (`?`) instead of Display (`%`) for a bunch of logs in the beacon processor, so we don't have to deal with concatenated block roots.
- Add new ERRO and CRIT to HTTP API to alert users when they're publishing late blocks.
## Additional Info
NA
## Proposed Changes
* Consolidate Tokio versions: everything now uses the latest v1.10.0, no more `tokio-compat`.
* Many semver-compatible changes via `cargo update`. Notably this upgrades from the yanked v0.8.0 version of crossbeam-deque which is present in v1.5.0-rc.0
* Many semver incompatible upgrades via `cargo upgrades` and `cargo upgrade --workspace pkg_name`. Notable ommissions:
- Prometheus, to be handled separately: https://github.com/sigp/lighthouse/issues/2485
- `rand`, `rand_xorshift`: the libsecp256k1 package requires 0.7.x, so we'll stick with that for now
- `ethereum-types` is pinned at 0.11.0 because that's what `web3` is using and it seems nice to have just a single version
## Additional Info
We still have two versions of `libp2p-core` due to `discv5` depending on the v0.29.0 release rather than `master`. AFAIK it should be OK to release in this state (cc @AgeManning )
## Issue Addressed
NA
## Proposed Changes
When testing our (not-yet-released) Doppelganger implementation, I noticed that we aren't detecting attestations included in blocks (only those on the gossip network).
This is because during [block processing](e8c0d1f19b/beacon_node/beacon_chain/src/beacon_chain.rs (L2168)) we only update the `observed_attestations` cache with each attestation, but not the `observed_attesters` cache. This is the correct behaviour when we consider the [p2p spec](https://github.com/ethereum/eth2.0-specs/blob/v1.0.1/specs/phase0/p2p-interface.md):
> [IGNORE] There has been no other valid attestation seen on an attestation subnet that has an identical attestation.data.target.epoch and participating validator index.
We're doing the right thing here and still allowing attestations on gossip that we've seen in a block. However, this doesn't work so nicely for Doppelganger.
To resolve this, I've taken the following steps:
- Add a `observed_block_attesters` cache.
- Rename `observed_attesters` to `observed_gossip_attesters`.
## TODO
- [x] Add a test to ensure a validator that's been seen in a block attestation (but not a gossip attestation) returns `true` for `BeaconChain::validator_seen_at_epoch`.
- [x] Add a test to ensure `observed_block_attesters` isn't polluted via gossip attestations and vice versa.
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Proposed Changes
* Implement the validator client and HTTP API changes necessary to support Altair
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Resolves#2069
## Proposed Changes
- Adds a `--doppelganger-detection` flag
- Adds a `lighthouse/seen_validators` endpoint, which will make it so the lighthouse VC is not interopable with other client beacon nodes if the `--doppelganger-detection` flag is used, but hopefully this will become standardized. Relevant Eth2 API repo issue: https://github.com/ethereum/eth2.0-APIs/issues/64
- If the `--doppelganger-detection` flag is used, the VC will wait until the beacon node is synced, and then wait an additional 2 epochs. The reason for this is to make sure the beacon node is able to subscribe to the subnets our validators should be attesting on. I think an alternative would be to have the beacon node subscribe to all subnets for 2+ epochs on startup by default.
## Additional Info
I'd like to add tests and would appreciate feedback.
TODO: handle validators started via the API, potentially make this default behavior
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
N/A
## Proposed Changes
- Removing a bunch of unnecessary references
- Updated `Error::VariantError` to `Error::Variant`
- There were additional enum variant lints that I ignored, because I thought our variant names were fine
- removed `MonitoredValidator`'s `pubkey` field, because I couldn't find it used anywhere. It looks like we just use the string version of the pubkey (the `id` field) if there is no index
## Additional Info
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
- Resolves#2169
## Proposed Changes
Adds the `AttesterCache` to allow validators to produce attestations for older slots. Presently, some arbitrary restrictions can force validators to receive an error when attesting to a slot earlier than the present one. This can cause attestation misses when there is excessive load on the validator client or time sync issues between the VC and BN.
## Additional Info
NA
## Proposed Changes
Add the `sync_aggregate` from `BeaconBlock` to the bulk signature verifier for blocks. This necessitates a new signature set constructor for the sync aggregate, which is different from the others due to the use of [`eth2_fast_aggregate_verify`](https://github.com/ethereum/eth2.0-specs/blob/v1.1.0-alpha.7/specs/altair/bls.md#eth2_fast_aggregate_verify) for sync aggregates, per [`process_sync_aggregate`](https://github.com/ethereum/eth2.0-specs/blob/v1.1.0-alpha.7/specs/altair/beacon-chain.md#sync-aggregate-processing). I made the choice to return an optional signature set, with `None` representing the case where the signature is valid on account of being the point at infinity (requires no further checking).
To "dogfood" the changes and prevent duplication, the consensus logic now uses the signature set approach as well whenever it is required to verify signatures (which should only be in testing AFAIK). The EF tests pass with the code as it exists currently, but failed before I adapted the `eth2_fast_aggregate_verify` changes (which is good).
As a result of this change Altair block processing should be a little faster, and importantly, we will no longer accidentally verify signatures when replaying blocks, e.g. when replaying blocks from the database.
## Issue Addressed
NA
## Proposed Changes
This PR addresses two things:
1. Allows the `ValidatorMonitor` to work with Altair states.
1. Optimizes `altair::process_epoch` (see [code](https://github.com/paulhauner/lighthouse/blob/participation-cache/consensus/state_processing/src/per_epoch_processing/altair/participation_cache.rs) for description)
## Breaking Changes
The breaking changes in this PR revolve around one premise:
*After the Altair fork, it's not longer possible (given only a `BeaconState`) to identify if a validator had *any* attestation included during some epoch. The best we can do is see if that validator made the "timely" source/target/head flags.*
Whilst this seems annoying, it's not actually too bad. Finalization is based upon "timely target" attestations, so that's really the most important thing. Although there's *some* value in knowing if a validator had *any* attestation included, it's far more important to know about "timely target" participation, since this is what affects finality and justification.
For simplicity and consistency, I've also removed the ability to determine if *any* attestation was included from metrics and API endpoints. Now, all Altair and non-Altair states will simply report on the head/target attestations.
The following section details where we've removed fields and provides replacement values.
### Breaking Changes: Prometheus Metrics
Some participation metrics have been removed and replaced. Some were removed since they are no longer relevant to Altair (e.g., total attesting balance) and others replaced with gwei values instead of pre-computed values. This provides more flexibility at display-time (e.g., Grafana).
The following metrics were added as replacements:
- `beacon_participation_prev_epoch_head_attesting_gwei_total`
- `beacon_participation_prev_epoch_target_attesting_gwei_total`
- `beacon_participation_prev_epoch_source_attesting_gwei_total`
- `beacon_participation_prev_epoch_active_gwei_total`
The following metrics were removed:
- `beacon_participation_prev_epoch_attester`
- instead use `beacon_participation_prev_epoch_source_attesting_gwei_total / beacon_participation_prev_epoch_active_gwei_total`.
- `beacon_participation_prev_epoch_target_attester`
- instead use `beacon_participation_prev_epoch_target_attesting_gwei_total / beacon_participation_prev_epoch_active_gwei_total`.
- `beacon_participation_prev_epoch_head_attester`
- instead use `beacon_participation_prev_epoch_head_attesting_gwei_total / beacon_participation_prev_epoch_active_gwei_total`.
The `beacon_participation_prev_epoch_attester` endpoint has been removed. Users should instead use the pre-existing `beacon_participation_prev_epoch_target_attester`.
### Breaking Changes: HTTP API
The `/lighthouse/validator_inclusion/{epoch}/{validator_id}` endpoint loses the following fields:
- `current_epoch_attesting_gwei` (use `current_epoch_target_attesting_gwei` instead)
- `previous_epoch_attesting_gwei` (use `previous_epoch_target_attesting_gwei` instead)
The `/lighthouse/validator_inclusion/{epoch}/{validator_id}` endpoint lose the following fields:
- `is_current_epoch_attester` (use `is_current_epoch_target_attester` instead)
- `is_previous_epoch_attester` (use `is_previous_epoch_target_attester` instead)
- `is_active_in_current_epoch` becomes `is_active_unslashed_in_current_epoch`.
- `is_active_in_previous_epoch` becomes `is_active_unslashed_in_previous_epoch`.
## Additional Info
NA
## TODO
- [x] Deal with total balances
- [x] Update validator_inclusion API
- [ ] Ensure `beacon_participation_prev_epoch_target_attester` and `beacon_participation_prev_epoch_head_attester` work before Altair
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Proposed Changes
Update to the latest version of the Altair spec, which includes new tests and a tweak to the target sync aggregators.
## Additional Info
This change is _not_ required for the imminent Altair devnet, and is waiting on the merge of #2321 to unstable.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Proposed Changes
Remove the remaining Altair `FIXME`s from consensus land.
1. Implement tree hash caching for the participation lists. This required some light type manipulation, including removing the `TreeHash` bound from `CachedTreeHash` which was purely descriptive.
2. Plumb the proposer index through Altair attestation processing, to avoid calculating it for _every_ attestation (potentially 128ms on large networks). This duplicates some work from #2431, but with the aim of getting it in sooner, particularly for the Altair devnets.
3. Removes two FIXMEs related to `superstruct` and cloning, which are unlikely to be particularly detrimental and will be tracked here instead: https://github.com/sigp/superstruct/issues/5
## Issue Addressed
#635
## Proposed Changes
- Keep attestations that reference a block we have not seen for 30secs before being re processed
- If we do import the block before that time elapses, it is reprocessed in that moment
- The first time it fails, do nothing wrt to gossipsub propagation or peer downscoring. If after being re processed it fails, downscore with a `LowToleranceError` and ignore the message.
## Issue Addressed
NA
## Proposed Changes
Adds a metric to see how many set bits are in the sync aggregate for each beacon block being imported.
## Additional Info
NA
## Issue Addressed
- Resolves#2444
## Proposed Changes
Adds some more detail to the error message returned when the `BeaconChainBuilder` is unable to access or decode block/state objects during startup.
## Additional Info
NA
## Proposed Changes
Implement the consensus changes necessary for the upcoming Altair hard fork.
## Additional Info
This is quite a heavy refactor, with pivotal types like the `BeaconState` and `BeaconBlock` changing from structs to enums. This ripples through the whole codebase with field accesses changing to methods, e.g. `state.slot` => `state.slot()`.
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
#2377
## Proposed Changes
Implement the same code used for block root lookups (from #2376) to state root lookups in order to improve performance and reduce associated memory spikes (e.g. from certain HTTP API requests).
## Additional Changes
- Tests using `rev_iter_state_roots` and `rev_iter_block_roots` have been refactored to use their `forwards` versions instead.
- The `rev_iter_state_roots` and `rev_iter_block_roots` functions are now unused and have been removed.
- The `state_at_slot` function has been changed to use the `forwards` iterator.
## Additional Info
- Some tests still need to be refactored to use their `forwards_iter` versions. These tests start their iteration from a specific beacon state and thus use the `rev_iter_state_roots_from` and `rev_iter_block_roots_from` functions. If they can be refactored, those functions can also be removed.
## Issue Addressed
`make lint` failing on rust 1.53.0.
## Proposed Changes
1.53.0 updates
## Additional Info
I haven't figure out why yet, we were now hitting the recursion limit in a few crates. So I had to add `#![recursion_limit = "256"]` in a few places
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Proposed Changes
A user on Discord (`@ChewsMacRibs`) reported that the validator monitor was logging `WARN Attested to an incorrect head` for their validator while it was awaiting activation.
This PR modifies the monitor so that it ignores inactive validators, by the logic that they are either awaiting activation, or have already exited. Either way, there's no way for an inactive validator to have their attestations included on chain, so no need for the monitor to report on them.
## Additional Info
To reproduce the bug requires registering validator keys manually with `--validator-monitor-pubkeys`. I don't think the bug will present itself with `--validator-monitor-auto`.
## Issue Addressed
NA
## Proposed Changes
When observing `jemallocator` heap profiles and Grafana, it became clear that Lighthouse is spending significant RAM/CPU on processing blocks from the RPC. On investigation, it seems that we are loading the parent of the block *before* we check to see if the block is already known. This is a big waste of resources.
This PR adds an additional `check_block_relevancy` call as the first thing we do when we try to process a `SignedBeaconBlock` via the RPC (or other similar methods). Ultimately, `check_block_relevancy` will be called again later in the block processing flow. It's a very light function and I don't think trying to optimize it out is worth the risk of a bad block slipping through.
Also adds a `New RPC block received` info log when we process a new RPC block. This seems like interesting and infrequent info.
## Additional Info
NA
## Issue Addressed
NA
## Primary Change
When investigating memory usage, I noticed that retrieving a block from an early slot (e.g., slot 900) would cause a sharp increase in the memory footprint (from 400mb to 800mb+) which seemed to be ever-lasting.
After some investigation, I found that the reverse iteration from the head back to that slot was the likely culprit. To counter this, I've switched the `BeaconChain::block_root_at_slot` to use the forwards iterator, instead of the reverse one.
I also noticed that the networking stack is using `BeaconChain::root_at_slot` to check if a peer is relevant (`check_peer_relevance`). Perhaps the steep, seemingly-random-but-consistent increases in memory usage are caused by the use of this function.
Using the forwards iterator with the HTTP API alleviated the sharp increases in memory usage. It also made the response much faster (before it felt like to took 1-2s, now it feels instant).
## Additional Changes
In the process I also noticed that we have two functions for getting block roots:
- `BeaconChain::block_root_at_slot`: returns `None` for a skip slot.
- `BeaconChain::root_at_slot`: returns the previous root for a skip slot.
I unified these two functions into `block_root_at_slot` and added the `WhenSlotSkipped` enum. Now, the caller must be explicit about the skip-slot behaviour when requesting a root.
Additionally, I replaced `vec![]` with `Vec::with_capacity` in `store::chunked_vector::range_query`. I stumbled across this whilst debugging and made this modification to see what effect it would have (not much). It seems like a decent change to keep around, but I'm not concerned either way.
Also, `BeaconChain::get_ancestor_block_root` is unused, so I got rid of it 🗑️.
## Additional Info
I haven't also done the same for state roots here. Whilst it's possible and a good idea, it's more work since the fwds iterators are presently block-roots-specific.
Whilst there's a few places a reverse iteration of state roots could be triggered (e.g., attestation production, HTTP API), they're no where near as common as the `check_peer_relevance` call. As such, I think we should get this PR merged first, then come back for the state root iters. I made an issue here https://github.com/sigp/lighthouse/issues/2377.
## Issue Addressed
Windows incompatibility.
## Proposed Changes
On windows, lighthouse needs to default to STDIN as tty doesn't exist. Also Windows uses ACLs for file permissions. So to mirror chmod 600, we will remove every entry in a file's ACL and add only a single SID that is an alias for the file owner.
Beyond that, there were several changes made to different unit tests because windows has slightly different error messages as well as frustrating nuances around killing a process :/
## Additional Info
Tested on my Windows VM and it appears to work, also compiled & tested on Linux with these changes. Permissions look correct on both platforms now. Just waiting for my validator to activate on Prater so I can test running full validator client on windows.
Co-authored-by: ethDreamer <37123614+ethDreamer@users.noreply.github.com>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
The latest version of Rust has new clippy rules & the codebase isn't up to date with them.
## Proposed Changes
Small formatting changes that clippy tells me are functionally equivalent
## Issue Addressed
N/A
## Proposed Changes
Add unit tests for the various CLI flags associated with the beacon node and validator client. These changes require the addition of two new flags: `dump-config` and `immediate-shutdown`.
## Additional Info
Both `dump-config` and `immediate-shutdown` are marked as hidden since they should only be used in testing and other advanced use cases.
**Note:** This requires changing `main.rs` so that the flags can adjust the program behavior as necessary.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
Resolves#2186
## Proposed Changes
404 for any block-related information on a slot that was skipped or orphaned
Affected endpoints:
- `/eth/v1/beacon/blocks/{block_id}`
- `/eth/v1/beacon/blocks/{block_id}/root`
- `/eth/v1/beacon/blocks/{block_id}/attestations`
- `/eth/v1/beacon/headers/{block_id}`
## Additional Info
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Proposed Changes
Use two instances of max cover when packing attestations into blocks: one for the previous epoch, and one for the current epoch. This reduces the amount of computation done by roughly half due to the `O(n^2)` running time of max cover (`2 * (n/2)^2 = n^2/2`). This should help alleviate some load on block proposal, particularly on Prater.
## Issue Addressed
NA
## Proposed Changes
- Adds a specific log and metric for when a block is enshrined as head with a delay that will caused bad attestations
- We *technically* already expose this information, but it's a little tricky to determine during debugging. This makes it nice and explicit.
- Fixes a minor reporting bug with the validator monitor where it was expecting agg. attestations too early (at half-slot rather than two-thirds-slot).
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
- Ensure that the [target consistency check](b356f52c5c) is always performed on aggregates.
- Add a regression test.
## Additional Info
NA
