## Issue Addressed
This PR attempts to workaround the recent frequent eth1 simulator failures caused by missing eth logs from Anvil.
> FailedToInsertDeposit(NonConsecutive { log_index: 1, expected: 0 })
This usually occurs at the beginning of the tests, and it guarantees a timeout after a few hours if this log shows up, and this is currently causing our CIs to fail quite frequently.
Example failure here: https://github.com/sigp/lighthouse/actions/runs/5525760195/jobs/10079736914
## Proposed Changes
The quick fix applied here adds a timeout to node startup and restarts the node again.
- Add a 60 seconds timeout to beacon node startup in eth1 simulator tests. It takes ~10 seconds on my machine, but could take longer on CI runners.
- Wrap the startup code in a retry function, that allows for 3 retries before returning an error.
## Additional Info
We should probably raise an issue under the Anvil GitHub repo there so this can be further investigated.
## Issue Addressed
Add support for ipv6 and dual stack in lighthouse.
## Proposed Changes
From an user perspective, now setting an ipv6 address, optionally configuring the ports should feel exactly the same as using an ipv4 address. If listening over both ipv4 and ipv6 then the user needs to:
- use the `--listen-address` two times (ipv4 and ipv6 addresses)
- `--port6` becomes then required
- `--discovery-port6` can now be used to additionally configure the ipv6 udp port
### Rough list of code changes
- Discovery:
- Table filter and ip mode set to match the listening config.
- Ipv6 address, tcp port and udp port set in the ENR builder
- Reported addresses now check which tcp port to give to libp2p
- LH Network Service:
- Can listen over Ipv6, Ipv4, or both. This uses two sockets. Using mapped addresses is disabled from libp2p and it's the most compatible option.
- NetworkGlobals:
- No longer stores udp port since was not used at all. Instead, stores the Ipv4 and Ipv6 TCP ports.
- NetworkConfig:
- Update names to make it clear that previous udp and tcp ports in ENR were Ipv4
- Add fields to configure Ipv6 udp and tcp ports in the ENR
- Include advertised enr Ipv6 address.
- Add type to model Listening address that's either Ipv4, Ipv6 or both. A listening address includes the ip, udp port and tcp port.
- UPnP:
- Kept only for ipv4
- Cli flags:
- `--listen-addresses` now can take up to two values
- `--port` will apply to ipv4 or ipv6 if only one listening address is given. If two listening addresses are given it will apply only to Ipv4.
- `--port6` New flag required when listening over ipv4 and ipv6 that applies exclusively to Ipv6.
- `--discovery-port` will now apply to ipv4 and ipv6 if only one listening address is given.
- `--discovery-port6` New flag to configure the individual udp port of ipv6 if listening over both ipv4 and ipv6.
- `--enr-udp-port` Updated docs to specify that it only applies to ipv4. This is an old behaviour.
- `--enr-udp6-port` Added to configure the enr udp6 field.
- `--enr-tcp-port` Updated docs to specify that it only applies to ipv4. This is an old behaviour.
- `--enr-tcp6-port` Added to configure the enr tcp6 field.
- `--enr-addresses` now can take two values.
- `--enr-match` updated behaviour.
- Common:
- rename `unused_port` functions to specify that they are over ipv4.
- add functions to get unused ports over ipv6.
- Testing binaries
- Updated code to reflect network config changes and unused_port changes.
## Additional Info
TODOs:
- use two sockets in discovery. I'll get back to this and it's on https://github.com/sigp/discv5/pull/160
- lcli allow listening over two sockets in generate_bootnodes_enr
- add at least one smoke flag for ipv6 (I have tested this and works for me)
- update the book
## Issue Addressed
Recent discussions with other client devs about optimistic sync have revealed a conceptual issue with the optimisation implemented in #3738. In designing that feature I failed to consider that the execution node checks the `blockHash` of the execution payload before responding with `SYNCING`, and that omitting this check entirely results in a degradation of the full node's validation. A node omitting the `blockHash` checks could be tricked by a supermajority of validators into following an invalid chain, something which is ordinarily impossible.
## Proposed Changes
I've added verification of the `payload.block_hash` in Lighthouse. In case of failure we log a warning and fall back to verifying the payload with the execution client.
I've used our existing dependency on `ethers_core` for RLP support, and a new dependency on Parity's `triehash` crate for the Merkle patricia trie. Although the `triehash` crate is currently unmaintained it seems like our best option at the moment (it is also used by Reth, and requires vastly less boilerplate than Parity's generic `trie-root` library).
Block hash verification is pretty quick, about 500us per block on my machine (mainnet).
The optimistic finalized sync feature can be disabled using `--disable-optimistic-finalized-sync` which forces full verification with the EL.
## Additional Info
This PR also introduces a new dependency on our [`metastruct`](https://github.com/sigp/metastruct) library, which was perfectly suited to the RLP serialization method. There will likely be changes as `metastruct` grows, but I think this is a good way to start dogfooding it.
I took inspiration from some Parity and Reth code while writing this, and have preserved the relevant license headers on the files containing code that was copied and modified.
This PR adds some health endpoints for the beacon node and the validator client.
Specifically it adds the endpoint:
`/lighthouse/ui/health`
These are not entirely stable yet. But provide a base for modification for our UI.
These also may have issues with various platforms and may need modification.
## Issue Addressed
N/A
## Proposed Changes
Make simulator merge compatible. Adds a `--post_merge` flag to the eth1 simulator that enables a ttd and simulates the merge transition. Uses the `MockServer` in the execution layer test utils to simulate a dummy execution node.
Adds the merge transition simulation to CI.
## Proposed Changes
Lots of lint updates related to `flat_map`, `unwrap_or_else` and string patterns. I did a little more creative refactoring in the op pool, but otherwise followed Clippy's suggestions.
## Additional Info
We need this PR to unblock CI.
## Issue Addressed
Resolves#2313
## Proposed Changes
Provide `BeaconNodeHttpClient` with a dedicated `Timeouts` struct.
This will allow granular adjustment of the timeout duration for different calls made from the VC to the BN. These can either be a constant value, or as a ratio of the slot duration.
Improve timeout performance by using these adjusted timeout duration's only whenever a fallback endpoint is available.
Add a CLI flag called `use-long-timeouts` to revert to the old behavior.
## Additional Info
Additionally set the default `BeaconNodeHttpClient` timeouts to the be the slot duration of the network, rather than a constant 12 seconds. This will allow it to adjust to different network specifications.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
#2276
## Proposed Changes
Add the `SensitiveUrl` struct which wraps `Url` and implements custom `Display` and `Debug` traits to redact user secrets from being logged in eth1 endpoints, beacon node endpoints and metrics.
## Additional Info
This also includes a small rewrite of the eth1 crate to make requests using `Url` instead of `&str`.
Some error messages have also been changed to remove `Url` data.
## Issue Addressed
resolves#2129resolves#2099
addresses some of #1712
unblocks #2076
unblocks #2153
## Proposed Changes
- Updates all the dependencies mentioned in #2129, except for web3. They haven't merged their tokio 1.0 update because they are waiting on some dependencies of their own. Since we only use web3 in tests, I think updating it in a separate issue is fine. If they are able to merge soon though, I can update in this PR.
- Updates `tokio_util` to 0.6.2 and `bytes` to 1.0.1.
- We haven't made a discv5 release since merging tokio 1.0 updates so I'm using a commit rather than release atm. **Edit:** I think we should merge an update of `tokio_util` to 0.6.2 into discv5 before this release because it has panic fixes in `DelayQueue` --> PR in discv5: https://github.com/sigp/discv5/pull/58
## Additional Info
tokio 1.0 changes that required some changes in lighthouse:
- `interval.next().await.is_some()` -> `interval.tick().await`
- `sleep` future is now `!Unpin` -> https://github.com/tokio-rs/tokio/issues/3028
- `try_recv` has been temporarily removed from `mpsc` -> https://github.com/tokio-rs/tokio/issues/3350
- stream features have moved to `tokio-stream` and `broadcast::Receiver::into_stream()` has been temporarily removed -> `https://github.com/tokio-rs/tokio/issues/2870
- I've copied over the `BroadcastStream` wrapper from this PR, but can update to use `tokio-stream` once it's merged https://github.com/tokio-rs/tokio/pull/3384
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Fixes#2141
Remove [tempdir](https://docs.rs/tempdir/0.3.7/tempdir/) in favor of [tempfile](https://docs.rs/tempfile/3.1.0/tempfile/).
## Proposed Changes
`tempfile` has a slightly different api that makes creating temp folders with a name prefix a chore (`tempdir::TempDir::new("toto")` => `tempfile::Builder::new().prefix("toto").tempdir()`).
So I removed temp folder name prefix where I deemed it not useful.
Otherwise, the functionality is the same.
## Issue Addressed
Resolves#1434 (this is the last major feature in the standard spec. There are only a couple of places we may be off-spec due to recent spec changes or ongoing discussion)
Partly addresses #1669
## Proposed Changes
- remove the websocket server
- remove the `TeeEventHandler` and `NullEventHandler`
- add server sent events according to the eth2 API spec
## Additional Info
This is according to the currently unmerged PR here: https://github.com/ethereum/eth2.0-APIs/pull/117
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Description
This PR updates Lighthouse to tokio 0.3. It includes a number of dependency updates and some structural changes as to how we create and spawn tasks.
This also brings with it a number of various improvements:
- Discv5 update
- Libp2p update
- Fix for recompilation issues
- Improved UPnP port mapping handling
- Futures dependency update
- Log downgrade to traces for rejecting peers when we've reached our max
Co-authored-by: blacktemplar <blacktemplar@a1.net>
## Issue Addressed
- Resolves#1706
## Proposed Changes
Updates dependencies across the workspace. Any crate that was not able to be brought to the latest version is listed in #1712.
## Additional Info
NA
- Resolves#1550
- Resolves#824
- Resolves#825
- Resolves#1131
- Resolves#1411
- Resolves#1256
- Resolve#1177
- Includes the `ShufflingId` struct initially defined in #1492. That PR is now closed and the changes are included here, with significant bug fixes.
- Implement the https://github.com/ethereum/eth2.0-APIs in a new `http_api` crate using `warp`. This replaces the `rest_api` crate.
- Add a new `common/eth2` crate which provides a wrapper around `reqwest`, providing the HTTP client that is used by the validator client and for testing. This replaces the `common/remote_beacon_node` crate.
- Create a `http_metrics` crate which is a dedicated server for Prometheus metrics (they are no longer served on the same port as the REST API). We now have flags for `--metrics`, `--metrics-address`, etc.
- Allow the `subnet_id` to be an optional parameter for `VerifiedUnaggregatedAttestation::verify`. This means it does not need to be provided unnecessarily by the validator client.
- Move `fn map_attestation_committee` in `mod beacon_chain::attestation_verification` to a new `fn with_committee_cache` on the `BeaconChain` so the same cache can be used for obtaining validator duties.
- Add some other helpers to `BeaconChain` to assist with common API duties (e.g., `block_root_at_slot`, `head_beacon_block_root`).
- Change the `NaiveAggregationPool` so it can index attestations by `hash_tree_root(attestation.data)`. This is a requirement of the API.
- Add functions to `BeaconChainHarness` to allow it to create slashings and exits.
- Allow for `eth1::Eth1NetworkId` to go to/from a `String`.
- Add functions to the `OperationPool` to allow getting all objects in the pool.
- Add function to `BeaconState` to check if a committee cache is initialized.
- Fix bug where `seconds_per_eth1_block` was not transferring over from `YamlConfig` to `ChainSpec`.
- Add the `deposit_contract_address` to `YamlConfig` and `ChainSpec`. We needed to be able to return it in an API response.
- Change some uses of serde `serialize_with` and `deserialize_with` to a single use of `with` (code quality).
- Impl `Display` and `FromStr` for several BLS fields.
- Check for clock discrepancy when VC polls BN for sync state (with +/- 1 slot tolerance). This is not intended to be comprehensive, it was just easy to do.
- See #1434 for a per-endpoint overview.
- Seeking clarity here: https://github.com/ethereum/eth2.0-APIs/issues/75
- [x] Add docs for prom port to close#1256
- [x] Follow up on this #1177
- [x] ~~Follow up with #1424~~ Will fix in future PR.
- [x] Follow up with #1411
- [x] ~~Follow up with #1260~~ Will fix in future PR.
- [x] Add quotes to all integers.
- [x] Remove `rest_types`
- [x] Address missing beacon block error. (#1629)
- [x] ~~Add tests for lighthouse/peers endpoints~~ Wontfix
- [x] ~~Follow up with validator status proposal~~ Tracked in #1434
- [x] Unify graffiti structs
- [x] ~~Start server when waiting for genesis?~~ Will fix in future PR.
- [x] TODO in http_api tests
- [x] Move lighthouse endpoints off /eth/v1
- [x] Update docs to link to standard
- ~~Blocked on #1586~~
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Closes#1487Closes#1427
Directory restructure in accordance with #1487. Also has temporary migration code to move the old directories into new structure.
Also extracts all default directory names and utility functions into a `directory` crate to avoid repetitio.
~Since `validator_definition.yaml` stores absolute paths, users will have to manually change the keystore paths or delete the file to get the validators picked up by the vc.~. `validator_definition.yaml` is migrated as well from the default directories.
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
Adds support for using the [`cross`](https://github.com/rust-embedded/cross) project to produce cross-compiled binaries using Docker images.
Provides quite clean and simple cross-compiles cause all the complexity is hidden in Dockerfiles. It does require you to be in the `docker` group though.
## Details
- Adds shortcut commands to `Makefile`
- Ensures `reqwest` and `discv5` use vendored openssl libs (i.e., static not shared).
- Switches to a [commit](284f705964) of blst that has a renamed C function to avoid a collision with openssl (upstream issue: https://github.com/supranational/blst/issues/21).
- Updates `ring` to the latest satisfiable version, since an earlier version was causing issues with `cross`.
- Off-topic, but adds extra message about Windows support as suggested by Discord user.
## Additional Info
- ~~Blocked on #1495~~
- There are no tests in CI for this yet for a few reasons:
- I'm hesitant to add more long-running tasks.
- Short-term bitrot should be avoided since we'll use it each release.
- In the long term I think it would be good to automate binary creation on a release.
- I observed the binaries increase in size from 50mb to 52mb after these changes.
