## Proposed Changes
Run cargo update and bump version in prep for v1.0.4 release
## Additional Info
Planning to merge this commit to `unstable`, test on Pyrmont and canary nodes, then push to `stable`.
## Issue Addressed
Closes#1264
## Proposed Changes
* Milagro BLS: tweak the feature flags so that Milagro doesn't get compiled if we're using BLST. Profiling showed that it was consuming about 1 minute of CPU time out of 60 minutes of CPU time (real time ~15 mins). A 1.6% saving.
* Reduce monomorphization: compiling for 3 different `EthSpec` types causes a heck of a lot of generic functions to be instantiated (monomorphized). Removing 2 of 3 cuts the LLVM+linking step from around 250 seconds to 180 seconds, a saving of 70 seconds (real time!). This applies only to `make` and not the CI build, because we test with the minimal spec on CI.
* Update `web3` crate to v0.13. This is perhaps the most controversial change, because it requires axing some deposit contract tools from `lcli`. I suspect these tools weren't used much anyway, and could be maintained separately, but I'm also happy to revert this change. However, it does save us a lot of compile time. With #1839, we now have 3 versions of Tokio (and all of Tokio's deps). This change brings us down to 2 versions, but 1 should be achievable once web3 (and reqwest) move to Tokio 0.3.
* Remove `lcli` from the Docker image. It's a dev tool and can be built from the repo if required.
## Issue Addressed
#1992 and #1987, and also to be considered a continuation of #1751
## Proposed Changes
many changed files but most are renaming to align the code with the semantics of `--network`
- remove the `--network` default value (in clap) and instead set it after checking the `network` and `testnet-dir` flags
- move `eth2_testnet_config` crate to `eth2_network_config`
- move `Eth2TestnetConfig` to `Eth2NetworkConfig`
- move `DEFAULT_HARDCODED_TESTNET` to `DEFAULT_HARDCODED_NETWORK`
- `beacon_node`s `get_eth2_testnet_config` loads the `DEFAULT_HARDCODED_NETWORK` if there is no network nor testnet provided
- `boot_node`s config loads the config same as the `beacon_node`, it was using the configuration only for preconfigured networks (That code is ~1year old so I asume it was not intended)
- removed a one year old comment stating we should try to emulate `https://github.com/eth2-clients/eth2-testnets/tree/master/nimbus/testnet1` it looks outdated (?)
- remove `lighthouse`s `load_testnet_config` in favor of `get_eth2_network_config` to centralize that logic (It had differences)
- some spelling
## Additional Info
Both the command of #1992 and the scripts of #1987 seem to work fine, same as `bn` and `vc`
Update lighthouse to version `v1.0.2`.
There are two major updates in this version:
- Updates to the task executor to tokio 0.3 and all sub-dependencies relying on core execution, including libp2p
- Update BLST
## Description
This PR updates Lighthouse to tokio 0.3. It includes a number of dependency updates and some structural changes as to how we create and spawn tasks.
This also brings with it a number of various improvements:
- Discv5 update
- Libp2p update
- Fix for recompilation issues
- Improved UPnP port mapping handling
- Futures dependency update
- Log downgrade to traces for rejecting peers when we've reached our max
Co-authored-by: blacktemplar <blacktemplar@a1.net>
## Issue Addressed
Closes#1504Closes#1505
Replaces #1703Closes#1707
## Proposed Changes
* Update BLST and Milagro to versions compatible with BLSv4 spec
* Update Lighthouse to spec v1.0.0-rc.0, and update EF test vectors
* Use the v1.0.0 constants for `MainnetEthSpec`.
* Rename `InteropEthSpec` -> `V012LegacyEthSpec`
* Change all constants to suit the mainnet `v0.12.3` specification (i.e., Medalla).
* Deprecate the `--spec` flag for the `lighthouse` binary
* This value is now obtained from the `config_name` field of the `YamlConfig`.
* Built in testnet YAML files have been updated.
* Ignore the `--spec` value, if supplied, log a warning that it will be deprecated
* `lcli` still has the spec flag, that's fine because it's dev tooling.
* Remove the `E: EthSpec` from `YamlConfig`
* This means we need to deser the genesis `BeaconState` on-demand, but this is fine.
* Swap the old "minimal", "mainnet" strings over to the new `EthSpecId` enum.
* Always require a `CONFIG_NAME` field in `YamlConfig` (it used to have a default).
## Additional Info
Lots of breaking changes, do not merge! ~~We will likely need a Lighthouse v0.4.0 branch, and possibly a long-term v0.3.0 branch to keep Medalla alive~~.
Co-authored-by: Kirk Baird <baird.k@outlook.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
- Resolves#1706
## Proposed Changes
Updates dependencies across the workspace. Any crate that was not able to be brought to the latest version is listed in #1712.
## Additional Info
NA
This commit was modified by Paul H whilst rebasing master onto
v0.3.0-staging
Adding UPnP support will help grow the DHT by allowing NAT traversal for peers with UPnP supported routers.
Using IGD library: https://docs.rs/igd/0.10.0/igd/
Adding the the libp2p tcp port and discovery udp port. If this fails it simply logs the attempt and moves on
Co-authored-by: Age Manning <Age@AgeManning.com>
Closes#1487Closes#1427
Directory restructure in accordance with #1487. Also has temporary migration code to move the old directories into new structure.
Also extracts all default directory names and utility functions into a `directory` crate to avoid repetitio.
~Since `validator_definition.yaml` stores absolute paths, users will have to manually change the keystore paths or delete the file to get the validators picked up by the vc.~. `validator_definition.yaml` is migrated as well from the default directories.
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
- Moves the git-based versioning we were doing into the `lighthouse_version` crate in `common`.
- Removes the `beacon_node/version` crate, replacing it with `lighthouse_version`.
- Bumps the version to `v0.2.0`.
## Additional Info
There are now two types of version string:
1. `const VERSION: &str = Lighthouse/v0.2.0-1419501f2+`
1. `version_with_platform() = Lighthouse/v0.2.0-1419501f2+/x86_64-linux`
(1) is handy cause it's a `const` and shorter. (2) has platform info so it's more useful. Note that the plus-sign (`+`) indicates the the git commit is dirty (it used to be `(modified)` but I had to shorten it to fit into graffiti).
These version strings are now included on:
- `lighthouse --version`
- `lcli --version`
- `curl localhost:5052/node/version`
- p2p messages when we communicate our version
You can update the version by changing this constant (version is not related to a `Cargo.toml`):
b9ad7102d5/common/lighthouse_version/src/lib.rs (L4-L15)
## Issue Addressed
Closes#1395
## Proposed Changes
* Add a feature to `lighthouse` and `lcli` called `portable` which enables the `portable` feature on our fork of BLST. This feature turns off the `-march=native` C compiler flag that produces binaries highly targeted to the host CPU's instruction set.
* Tweak the `Makefile` so that when the `PORTABLE` environment variable is set to `true`, it compiles with this feature.
* Temporarily enable `PORTABLE=true` in the Docker build so that the image on Docker Hub is portable. Eventually I think we should enable `PORTABLE=true` _only on Docker Hub_, so that users building locally can take advantage of the tasty compiler magic. This seems to be possible by setting a Docker Hub environment variable: https://docs.docker.com/docker-hub/builds/#environment-variables-for-builds
## Additional Info
Tested by compiling on a very new CPU (Intel Core i7-8550U) and copying the binary to a very old CPU (Intel Core i3 530). Before the portability fix, this produced the SIGILL crash described in #1395, and after the fix, it worked smoothly.
I'm in the process of testing the Docker build and running some benches to confirm that the performance penalty isn't too severe.
* Add logging on shutdown
* Replace tokio::spawn with handle.spawn
* Upgrade tokio
* Add a task executor
* Beacon chain tasks use task executor
* Validator client tasks use task executor
* Rename runtime_handle to executor
* Add duration histograms; minor fixes
* Cleanup
* Fix logs
* Fix tests
* Remove random file
* Get enr dependency instead of libp2p
* Address some review comments
* Libp2p takes a TaskExecutor
* Ugly fix libp2p tests
* Move TaskExecutor to own file
* Upgrade Dockerfile rust version
* Minor fixes
* Revert "Ugly fix libp2p tests"
This reverts commit 58d4bb690f52de28d893943b7504d2d0c6621429.
* Pretty fix libp2p tests
* Add spawn_without_exit; change Counter to Gauge
* Tidy
* Move log from RuntimeContext to TaskExecutor
* Fix errors
* Replace histogram with int_gauge for async tasks
* Fix todo
* Fix memory leak in test by exiting all spawned tasks at the end
* Port eth1 lib to use stable futures
* Port eth1_test_rig to stable futures
* Port eth1 tests to stable futures
* Port genesis service to stable futures
* Port genesis tests to stable futures
* Port beacon_chain to stable futures
* Port lcli to stable futures
* Fix eth1_test_rig (#1014)
* Fix lcli
* Port timer to stable futures
* Fix timer
* Port websocket_server to stable futures
* Port notifier to stable futures
* Add TODOS
* Update hashmap hashset to stable futures
* Adds panic test to hashset delay
* Port remote_beacon_node to stable futures
* Fix lcli merge conflicts
* Non rpc stuff compiles
* protocol.rs compiles
* Port websockets, timer and notifier to stable futures (#1035)
* Fix lcli
* Port timer to stable futures
* Fix timer
* Port websocket_server to stable futures
* Port notifier to stable futures
* Add TODOS
* Port remote_beacon_node to stable futures
* Partial eth2-libp2p stable future upgrade
* Finished first round of fighting RPC types
* Further progress towards porting eth2-libp2p adds caching to discovery
* Update behaviour
* RPC handler to stable futures
* Update RPC to master libp2p
* Network service additions
* Fix the fallback transport construction (#1102)
* Correct warning
* Remove hashmap delay
* Compiling version of eth2-libp2p
* Update all crates versions
* Fix conversion function and add tests (#1113)
* Port validator_client to stable futures (#1114)
* Add PH & MS slot clock changes
* Account for genesis time
* Add progress on duties refactor
* Add simple is_aggregator bool to val subscription
* Start work on attestation_verification.rs
* Add progress on ObservedAttestations
* Progress with ObservedAttestations
* Fix tests
* Add observed attestations to the beacon chain
* Add attestation observation to processing code
* Add progress on attestation verification
* Add first draft of ObservedAttesters
* Add more tests
* Add observed attesters to beacon chain
* Add observers to attestation processing
* Add more attestation verification
* Create ObservedAggregators map
* Remove commented-out code
* Add observed aggregators into chain
* Add progress
* Finish adding features to attestation verification
* Ensure beacon chain compiles
* Link attn verification into chain
* Integrate new attn verification in chain
* Remove old attestation processing code
* Start trying to fix beacon_chain tests
* Split adding into pools into two functions
* Add aggregation to harness
* Get test harness working again
* Adjust the number of aggregators for test harness
* Fix edge-case in harness
* Integrate new attn processing in network
* Fix compile bug in validator_client
* Update validator API endpoints
* Fix aggreagation in test harness
* Fix enum thing
* Fix attestation observation bug:
* Patch failing API tests
* Start adding comments to attestation verification
* Remove unused attestation field
* Unify "is block known" logic
* Update comments
* Supress fork choice errors for network processing
* Add todos
* Tidy
* Add gossip attn tests
* Disallow test harness to produce old attns
* Comment out in-progress tests
* Partially address pruning tests
* Fix failing store test
* Add aggregate tests
* Add comments about which spec conditions we check
* Dont re-aggregate
* Split apart test harness attn production
* Fix compile error in network
* Make progress on commented-out test
* Fix skipping attestation test
* Add fork choice verification tests
* Tidy attn tests, remove dead code
* Remove some accidentally added code
* Fix clippy lint
* Rename test file
* Add block tests, add cheap block proposer check
* Rename block testing file
* Add observed_block_producers
* Tidy
* Switch around block signature verification
* Finish block testing
* Remove gossip from signature tests
* First pass of self review
* Fix deviation in spec
* Update test spec tags
* Start moving over to hashset
* Finish moving observed attesters to hashmap
* Move aggregation pool over to hashmap
* Make fc attn borrow again
* Fix rest_api compile error
* Fix missing comments
* Fix monster test
* Uncomment increasing slots test
* Address remaining comments
* Remove unsafe, use cfg test
* Remove cfg test flag
* Fix dodgy comment
* Revert "Update hashmap hashset to stable futures"
This reverts commit d432378a3cc5cd67fc29c0b15b96b886c1323554.
* Revert "Adds panic test to hashset delay"
This reverts commit 281502396fc5b90d9c421a309c2c056982c9525b.
* Ported attestation_service
* Ported duties_service
* Ported fork_service
* More ports
* Port block_service
* Minor fixes
* VC compiles
* Update TODOS
* Borrow self where possible
* Ignore aggregates that are already known.
* Unify aggregator modulo logic
* Fix typo in logs
* Refactor validator subscription logic
* Avoid reproducing selection proof
* Skip HTTP call if no subscriptions
* Rename DutyAndState -> DutyAndProof
* Tidy logs
* Print root as dbg
* Fix compile errors in tests
* Fix compile error in test
* Re-Fix attestation and duties service
* Minor fixes
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Network crate update to stable futures
* Port account_manager to stable futures (#1121)
* Port account_manager to stable futures
* Run async fns in tokio environment
* Port rest_api crate to stable futures (#1118)
* Port rest_api lib to stable futures
* Reduce tokio features
* Update notifier to stable futures
* Builder update
* Further updates
* Convert self referential async functions
* stable futures fixes (#1124)
* Fix eth1 update functions
* Fix genesis and client
* Fix beacon node lib
* Return appropriate runtimes from environment
* Fix test rig
* Refactor eth1 service update
* Upgrade simulator to stable futures
* Lighthouse compiles on stable futures
* Remove println debugging statement
* Update libp2p service, start rpc test upgrade
* Update network crate for new libp2p
* Update tokio::codec to futures_codec (#1128)
* Further work towards RPC corrections
* Correct http timeout and network service select
* Use tokio runtime for libp2p
* Revert "Update tokio::codec to futures_codec (#1128)"
This reverts commit e57aea924acf5cbabdcea18895ac07e38a425ed7.
* Upgrade RPC libp2p tests
* Upgrade secio fallback test
* Upgrade gossipsub examples
* Clean up RPC protocol
* Test fixes (#1133)
* Correct websocket timeout and run on os thread
* Fix network test
* Clean up PR
* Correct tokio tcp move attestation service tests
* Upgrade attestation service tests
* Correct network test
* Correct genesis test
* Test corrections
* Log info when block is received
* Modify logs and update attester service events
* Stable futures: fixes to vc, eth1 and account manager (#1142)
* Add local testnet scripts
* Remove whiteblock script
* Rename local testnet script
* Move spawns onto handle
* Fix VC panic
* Initial fix to block production issue
* Tidy block producer fix
* Tidy further
* Add local testnet clean script
* Run cargo fmt
* Tidy duties service
* Tidy fork service
* Tidy ForkService
* Tidy AttestationService
* Tidy notifier
* Ensure await is not suppressed in eth1
* Ensure await is not suppressed in account_manager
* Use .ok() instead of .unwrap_or(())
* RPC decoding test for proto
* Update discv5 and eth2-libp2p deps
* Fix lcli double runtime issue (#1144)
* Handle stream termination and dialing peer errors
* Correct peer_info variant types
* Remove unnecessary warnings
* Handle subnet unsubscription removal and improve logigng
* Add logs around ping
* Upgrade discv5 and improve logging
* Handle peer connection status for multiple connections
* Improve network service logging
* Improve logging around peer manager
* Upgrade swarm poll centralise peer management
* Identify clients on error
* Fix `remove_peer` in sync (#1150)
* remove_peer removes from all chains
* Remove logs
* Fix early return from loop
* Improved logging, fix panic
* Partially correct tests
* Stable futures: Vc sync (#1149)
* Improve syncing heuristic
* Add comments
* Use safer method for tolerance
* Fix tests
* Stable futures: Fix VC bug, update agg pool, add more metrics (#1151)
* Expose epoch processing summary
* Expose participation metrics to prometheus
* Switch to f64
* Reduce precision
* Change precision
* Expose observed attesters metrics
* Add metrics for agg/unagg attn counts
* Add metrics for gossip rx
* Add metrics for gossip tx
* Adds ignored attns to prom
* Add attestation timing
* Add timer for aggregation pool sig agg
* Add write lock timer for agg pool
* Add more metrics to agg pool
* Change map lock code
* Add extra metric to agg pool
* Change lock handling in agg pool
* Change .write() to .read()
* Add another agg pool timer
* Fix for is_aggregator
* Fix pruning bug
Co-authored-by: pawan <pawandhananjay@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Add progress on new deposits
* Add deposited command to account manager
* Remove old lcli::helpers mod
* Clean clap_utils
* Refactor lcli deposit contract commands to use IPC
* Make testnet optional for environment
* Use dbg formatting for deploy address
* Add command to generate bootnode enr
* Ensure lcli returns with 1 on error
* Ensure account manager returns 1 on error
* Disallow deposits to the zero address
* Update web3 in eth1 crate
* Ensure correct lighthouse dir is created
* Reduce deposit gas requirement
* Update cargo.lock
* Add progress on new deposits
* Add deposited command to account manager
* Remove old lcli::helpers mod
* Clean clap_utils
* Refactor lcli deposit contract commands to use IPC
* Add command to generate bootnode enr
* Ensure lcli returns with 1 on error
* Ensure account manager returns 1 on error
* Update web3 in eth1 crate
* Update Cargo.lock
* Move lcli out of main install script
* Change --limit to --at-least
* Change --datadir to --validator-dir
* Remove duplication in docs
* Remove ping protocol
* Initial renaming of network services
* Correct rebasing relative to latest master
* Start updating types
* Adds HashMapDelay struct to utils
* Initial network restructure
* Network restructure. Adds new types for v0.2.0
* Removes build artefacts
* Shift validation to beacon chain
* Temporarily remove gossip validation
This is to be updated to match current optimisation efforts.
* Adds AggregateAndProof
* Begin rebuilding pubsub encoding/decoding
* Signature hacking
* Shift gossipsup decoding into eth2_libp2p
* Existing EF tests passing with fake_crypto
* Shifts block encoding/decoding into RPC
* Delete outdated API spec
* All release tests passing bar genesis state parsing
* Update and test YamlConfig
* Update to spec v0.10 compatible BLS
* Updates to BLS EF tests
* Add EF test for AggregateVerify
And delete unused hash2curve tests for uncompressed points
* Update EF tests to v0.10.1
* Use optional block root correctly in block proc
* Use genesis fork in deposit domain. All tests pass
* Fast aggregate verify test
* Update REST API docs
* Fix unused import
* Bump spec tags to v0.10.1
* Add `seconds_per_eth1_block` to chainspec
* Update to timestamp based eth1 voting scheme
* Return None from `get_votes_to_consider` if block cache is empty
* Handle overflows in `is_candidate_block`
* Revert to failing tests
* Fix eth1 data sets test
* Choose default vote according to spec
* Fix collect_valid_votes tests
* Fix `get_votes_to_consider` to choose all eligible blocks
* Uncomment winning_vote tests
* Add comments; remove unused code
* Reduce seconds_per_eth1_block for simulation
* Addressed review comments
* Add test for default vote case
* Fix logs
* Remove unused functions
* Meter default eth1 votes
* Fix comments
* Progress on attestation service
* Address review comments; remove unused dependency
* Initial work on removing libp2p lock
* Add LRU caches to store (rollup)
* Update attestation validation for DB changes (WIP)
* Initial version of should_forward_block
* Scaffold
* Progress on attestation validation
Also, consolidate prod+testing slot clocks so that they share much
of the same implementation and can both handle sub-slot time changes.
* Removes lock from libp2p service
* Completed network lock removal
* Finish(?) attestation processing
* Correct network termination future
* Add slot check to block check
* Correct fmt issues
* Remove Drop implementation for network service
* Add first attempt at attestation proc. re-write
* Add version 2 of attestation processing
* Minor fixes
* Add validator pubkey cache
* Make get_indexed_attestation take a committee
* Link signature processing into new attn verification
* First working version
* Ensure pubkey cache is updated
* Add more metrics, slight optimizations
* Clone committee cache during attestation processing
* Update shuffling cache during block processing
* Remove old commented-out code
* Fix shuffling cache insert bug
* Used indexed attestation in fork choice
* Restructure attn processing, add metrics
* Add more detailed metrics
* Tidy, fix failing tests
* Fix failing tests, tidy
* Address reviewers suggestions
* Disable/delete two outdated tests
* Modification of validator for subscriptions
* Add slot signing to validator client
* Further progress on validation subscription
* Adds necessary validator subscription functionality
* Add new Pubkeys struct to signature_sets
* Refactor with functional approach
* Update beacon chain
* Clean up validator <-> beacon node http types
* Add aggregator status to ValidatorDuty
* Impl Clone for manual slot clock
* Fix minor errors
* Further progress validator client subscription
* Initial subscription and aggregation handling
* Remove decompressed member from pubkey bytes
* Progress to modifying val client for attestation aggregation
* First draft of validator client upgrade for aggregate attestations
* Add hashmap for indices lookup
* Add state cache, remove store cache
* Only build the head committee cache
* Removes lock on a network channel
* Partially implement beacon node subscription http api
* Correct compilation issues
* Change `get_attesting_indices` to use Vec
* Fix failing test
* Partial implementation of timer
* Adds timer, removes exit_future, http api to op pool
* Partial multiple aggregate attestation handling
* Permits bulk messages accross gossipsub network channel
* Correct compile issues
* Improve gosispsub messaging and correct rest api helpers
* Added global gossipsub subscriptions
* Update validator subscriptions data structs
* Tidy
* Re-structure validator subscriptions
* Initial handling of subscriptions
* Re-structure network service
* Add pubkey cache persistence file
* Add more comments
* Integrate persistence file into builder
* Add pubkey cache tests
* Add HashSetDelay and introduce into attestation service
* Handles validator subscriptions
* Add data_dir to beacon chain builder
* Remove Option in pubkey cache persistence file
* Ensure consistency between datadir/data_dir
* Fix failing network test
* Peer subnet discovery gets queued for future subscriptions
* Reorganise attestation service functions
* Initial wiring of attestation service
* First draft of attestation service timing logic
* Correct minor typos
* Tidy
* Fix todos
* Improve tests
* Add PeerInfo to connected peers mapping
* Fix compile error
* Fix compile error from merge
* Split up block processing metrics
* Tidy
* Refactor get_pubkey_from_state
* Remove commented-out code
* Rename state_cache -> checkpoint_cache
* Rename Checkpoint -> Snapshot
* Tidy, add comments
* Tidy up find_head function
* Change some checkpoint -> snapshot
* Add tests
* Expose max_len
* Remove dead code
* Tidy
* Fix bug
* Add sync-speed metric
* Add first attempt at VerifiableBlock
* Start integrating into beacon chain
* Integrate VerifiableBlock
* Rename VerifableBlock -> PartialBlockVerification
* Add start of typed methods
* Add progress
* Add further progress
* Rename structs
* Add full block verification to block_processing.rs
* Further beacon chain integration
* Update checks for gossip
* Add todo
* Start adding segement verification
* Add passing chain segement test
* Initial integration with batch sync
* Minor changes
* Tidy, add more error checking
* Start adding chain_segment tests
* Finish invalid signature tests
* Include single and gossip verified blocks in tests
* Add gossip verification tests
* Start adding docs
* Finish adding comments to block_processing.rs
* Rename block_processing.rs -> block_verification
* Start removing old block processing code
* Fixes beacon_chain compilation
* Fix project-wide compile errors
* Remove old code
* Correct code to pass all tests
* Fix bug with beacon proposer index
* Fix shim for BlockProcessingError
* Only process one epoch at a time
* Fix loop in chain segment processing
* Correct tests from master merge
* Add caching for state.eth1_data_votes
* Add BeaconChain::validator_pubkey
* Revert "Add caching for state.eth1_data_votes"
This reverts commit cd73dcd6434fb8d8e6bf30c5356355598ea7b78e.
Co-authored-by: Grant Wuerker <gwuerker@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
Co-authored-by: pawan <pawandhananjay@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Update to spec v0.9.0
* Update to v0.9.1
* Bump spec tags for v0.9.1
* Formatting, fix CI failures
* Resolve accidental KeyPair merge conflict
* Document new BeaconState functions
* Add `validator` changes from `validator-to-rest`
* Add initial (failing) REST api tests
* Fix signature parsing
* Add more tests
* Refactor http router
* Add working tests for publish beacon block
* Add validator duties tests
* Move account_manager under `lighthouse` binary
* Unify logfile handling in `environment` crate.
* Fix incorrect cache drops in `advance_caches`
* Update fork choice for v0.9.1
* Add `deposit_contract` crate
* Add progress on validator onboarding
* Add unfinished attesation code
* Update account manager CLI
* Write eth1 data file as hex string
* Integrate ValidatorDirectory with validator_client
* Move ValidatorDirectory into validator_client
* Clean up some FIXMEs
* Add beacon_chain_sim
* Fix a few docs/logs
* Expand `beacon_chain_sim`
* Fix spec for `beacon_chain_sim
* More testing for api
* Start work on attestation endpoint
* Reject empty attestations
* Allow attestations to genesis block
* Add working tests for `rest_api` validator endpoint
* Remove grpc from beacon_node
* Start heavy refactor of validator client
- Block production is working
* Prune old validator client files
* Start works on attestation service
* Add attestation service to validator client
* Use full pubkey for validator directories
* Add validator duties post endpoint
* Use par_iter for keypair generation
* Use bulk duties request in validator client
* Add version http endpoint tests
* Add interop keys and startup wait
* Ensure a prompt exit
* Add duties pruning
* Fix compile error in beacon node tests
* Add github workflow
* Modify rust.yaml
* Modify gitlab actions
* Add to CI file
* Add sudo to CI npm install
* Move cargo fmt to own job in tests
* Fix cargo fmt in CI
* Add rustup update before cargo fmt
* Change name of CI job
* Make other CI jobs require cargo fmt
* Add CI badge
* Remove gitlab and travis files
* Add different http timeout for debug
* Update docker file, use makefile in CI
* Use make in the dockerfile, skip the test
* Use the makefile for debug GI test
* Update book
* Tidy grpc and misc things
* Apply discv5 fixes
* Address other minor issues
* Fix warnings
* Attempt fix for addr parsing
* Tidy validator config, CLIs
* Tidy comments
* Tidy signing, reduce ForkService duplication
* Fail if skipping too many slots
* Set default recent genesis time to 0
* Add custom http timeout to validator
* Fix compile bug in node_test_rig
* Remove old bootstrap flag from val CLI
* Update docs
* Tidy val client
* Change val client log levels
* Add comments, more validity checks
* Fix compile error, add comments
* Undo changes to eth2-libp2p/src
* Reduce duplication of keypair generation
* Add more logging for validator duties
* Fix beacon_chain_sim, nitpicks
* Fix compile error, minor nits
* Update to use v0.9.2 version of deposit contract
* Add efforts to automate eth1 testnet deployment
* Fix lcli testnet deployer
* Modify bn CLI to parse eth2_testnet_dir
* Progress with account_manager deposit tools
* Make account manager submit deposits
* Add password option for submitting deposits
* Allow custom deposit amount
* Add long names to lcli clap
* Add password option to lcli deploy command
* Fix minor bugs whilst testing
* Address Michael's comments
* Add refund-deposit-contract to lcli
* Use time instead of skip count for denying long skips
* Improve logging for eth1
* Fix bug with validator services exiting on error
* Drop the block cache after genesis
* Modify eth1 testnet config
* Improve eth1 logging
* Make validator wait until genesis time
* Fix bug in eth1 voting
* Add more logging to eth1 voting
* Handle errors in eth1 http module
* Set SECONDS_PER_DAY to sensible minimum
* Shorten delay before testnet start
* Ensure eth1 block is produced without any votes
* Improve eth1 logging
* Fix broken tests in eth1
* Tidy code in rest_api
* Fix failing test in deposit_contract
* Make CLI args more consistent
* Change validator/duties endpoint
* Add time-based skip slot limiting
* Add new error type missed in previous commit
* Add log when waiting for genesis
* Refactor beacon node CLI
* Remove unused dep
* Add lcli eth1-genesis command
* Fix bug in master merge
* Apply clippy lints to beacon node
* Add support for YamlConfig in Eth2TestnetDir
* Upgrade tesnet deposit contract version
* Remove unnecessary logging and correct formatting
* Add a hardcoded eth2 testnet config
* Ensure http server flag works. Overwrite configs with flags.
* Ensure boot nodes are loaded from testnet dir
* Fix account manager CLI bugs
* Fix bugs with beacon node cli
* Allow testnet dir without boot nodes
* Write genesis state as SSZ
* Remove ---/n from the start of testnet_dir files
* Set default libp2p address
* Tidy account manager CLI, add logging
* Add check to see if testnet dir exists
* Apply reviewers suggestions
* Add HeadTracker struct
* Add fork choice persistence
* Shorten slot time for simulator
* Add the /beacon/heads API endpoint
* Update hardcoded testnet
* Add tests for BeaconChain persistence + fix bugs
* Extend BeaconChain persistence testing
* Ensure chain is finalized b4 persistence tests
* Ensure boot_enr.yaml is include in binary
* Refactor beacon_chain_sim
* Move files about in beacon sim
* Update beacon_chain_sim
* Fix bug with deposit inclusion
* Increase log in genesis service, fix todo
* Tidy sim, fix broken rest_api tests
* Fix more broken tests
* Update testnet
* Fix broken rest api test
* Tidy account manager CLI
* Use tempdir for account manager
* Stop hardcoded testnet dir from creating dir
* Rename Eth2TestnetDir to Eth2TestnetConfig
* Change hardcoded -> hard_coded
* Tidy account manager
* Add log to account manager
* Tidy, ensure head tracker is loaded from disk
* Tidy beacon chain builder
* Tidy eth1_chain
* Adds log support for simulator
* Revert "Adds log support for simulator"
This reverts commit ec77c66a052350f551db145cf20f213823428dd3.
* Adds log support for simulator
* Tidy after self-review
* Change default log level
* Address Michael's delicious PR comments
* Fix off-by-one in tests
* Refactor to cache Eth1Data
* Fix merge conflicts and minor refactorings
* Rename Eth1Cache to Eth1DataCache
* Refactor events subscription
* Add deposits module to interface with BeaconChain deposits
* Remove utils
* Rename to types.rs and add trait constraints to Eth1DataFetcher
* Confirm to trait constraints. Make Web3DataFetcher cloneable
* Make fetcher object member of deposit and eth1_data cache and other fixes
* Fix update_cache function
* Move fetch_eth1_data to impl block
* Fix deposit tests
* Create Eth1 object for interfacing with Beacon chain
* Add `run` function for running update_cache and subscribe_deposit_logs tasks
* Add logging
* Run `cargo fmt` and make tests pass
* Convert sync functions to async
* Add timeouts to web3 functions
* Return futures from cache functions
* Add failed chaining of futures
* Working cache updation
* Clean up tests and `update_cache` function
* Refactor `get_eth1_data` functions to work with future returning functions
* Refactor eth1 `run` function to work with modified `update_cache` api
* Minor changes
* Add distance parameter to `update_cache`
* Fix tests and other minor fixes
* Working integration with cache and deposits
* Add merkle_tree construction, proof generation and verification code
* Add function to construct and fetch Deposits for BeaconNode
* Add error handling
* Import ssz
* Add error handling to eth1 cache and fix minor errors
* Run rustfmt
* Fix minor bug
* Rename Eth1Error and change to Result<T>
* Change deposit fetching mechanism from notification based to poll based
* Add deposits from eth1 chain in a given range every `x` blocks
* Modify `run` function to accommodate changes
* Minor fixes
* Fix formatting
* Initial commit. web3 api working.
* Tidied up lib. Add function for fetching logs.
* Refactor with `Eth1DataFetcher` trait
* Add parsing for deposit contract logs and get_eth1_data function
* Add `get_eth1_votes` function
* Refactor to cache Eth1Data
* Fix merge conflicts and minor refactorings
* Rename Eth1Cache to Eth1DataCache
* Refactor events subscription
* Add deposits module to interface with BeaconChain deposits
* Remove utils
* Rename to types.rs and add trait constraints to Eth1DataFetcher
* Confirm to trait constraints. Make Web3DataFetcher cloneable
* Make fetcher object member of deposit and eth1_data cache and other fixes
* Fix update_cache function
* Move fetch_eth1_data to impl block
* Fix deposit tests
* Create Eth1 object for interfacing with Beacon chain
* Add `run` function for running update_cache and subscribe_deposit_logs tasks
* Add logging
* Run `cargo fmt` and make tests pass
* Convert sync functions to async
* Add timeouts to web3 functions
* Return futures from cache functions
* Add failed chaining of futures
* Working cache updation
* Clean up tests and `update_cache` function
* Refactor `get_eth1_data` functions to work with future returning functions
* Refactor eth1 `run` function to work with modified `update_cache` api
* Minor changes
* Add distance parameter to `update_cache`
* Fix tests and other minor fixes
* Working integration with cache and deposits
* Add merkle_tree construction, proof generation and verification code
* Add function to construct and fetch Deposits for BeaconNode
* Add error handling
* Import ssz
* Add error handling to eth1 cache and fix minor errors
* Run rustfmt
* Fix minor bug
* Rename Eth1Error and change to Result<T>
* Change deposit fetching mechanism from notification based to poll based
* Add deposits from eth1 chain in a given range every `x` blocks
* Modify `run` function to accommodate changes
* Minor fixes
* Fix formatting
* Fix merge issue
* Refactor with `Config` struct. Remote `ContractConfig`
* Rename eth1_chain crate to eth1
* Rename files and read abi file using `fs::read`
* Move eth1 to lib
* Remove unnecessary mutability constraint
* Add `Web3Backend` for returning actual eth1 data
* Refactor `get_eth1_votes` to return a Result
* Delete `eth1_chain` crate
* Return `Result` from `get_deposits`
* Fix range of deposits to return to beacon chain
* Add `get_block_height_by_hash` trait function
* Add naive method for getting `previous_eth1_distance`
* Add eth1 config params to main config
* Add instructions for setting up eth1 testing environment
* Add build script to fetch deposit contract abi
* Contract ABI is part of compiled binary
* Fix minor bugs
* Move docs to lib
* Add timeout to config
* Remove print statements
* Change warn to error
* Fix typos
* Removed prints in test and get timeout value from config
* Fixed error types
* Added logging to web3_fetcher
* Refactor for modified web3 api
* Fix minor stuff
* Add build script
* Tidy, hide eth1 integration tests behind flag
* Add http crate
* Add first stages of eth1_test_rig
* Fix deposits on test rig
* Fix bug with deposit count method
* Add block hash getter to http eth1
* Clean eth1 http crate and tests
* Add script to start ganache
* Adds deposit tree to eth1-http
* Extend deposit tree tests
* Tidy tests in eth1-http
* Add more detail to get block request
* Add block cache to eth1-http
* Rename deposit tree to deposit cache
* Add inital updating to eth1-http
* Tidy updater
* Fix compile bugs in tests
* Adds an Eth1DataCache builder
* Reorg eth1-http files
* Add (failing) tests for eth1 updater
* Rename files, fix bug in eth1-http
* Ensure that ganache timestamps are increasing
* Fix bugs with getting eth1data ancestors
* Improve eth1 testing, fix bugs
* Add truncate method to block cache
* Add pruning to block cache update process
* Add tests for block pruning
* Allow for dropping an expired cache.
* Add more comments
* Add first compiling version of deposit updater
* Add common fn for getting range of required blocks
* Add passing deposit update test
* Improve tests
* Fix block pruning bug
* Add tests for running two updates at once
* Add updater services to eth1
* Add deposit collection to beacon chain
* Add incomplete builder experiments
* Add first working version of beacon chain builder
* Update test harness to new beacon chain type
* Rename builder file, tidy
* Add first working client builder
* Progress further on client builder
* Update becaon node binary to use client builder
* Ensure release tests compile
* Remove old eth1 crate
* Add first pass of new lighthouse binary
* Fix websocket server startup
* Remove old binary code from beacon_node crate
* Add first working beacon node tests
* Add genesis crate, new eth1 cache_2
* Add Serivce to Eth1Cache
* Refactor with general eth1 improvements
* Add passing genesis test
* Tidy, add comments
* Add more comments to eth1 service
* Add further eth1 progress
* Fix some bugs with genesis
* Fix eth1 bugs, make eth1 linking more efficient
* Shift logic in genesis service
* Add more comments to genesis service
* Add gzip, max request values, timeouts to http
* Update testnet parameters to suit goerli testnet
* Add ability to vary Fork, fix custom spec
* Be more explicit about deposit fork version
* Start adding beacon chain eth1 option
* Add more flexibility to prod client
* Further runtime refactoring
* Allow for starting from store
* Add bootstrapping to client config
* Add remote_beacon_node crate
* Update eth1 service for more configurability
* Update eth1 tests to use less runtimes
* Patch issues with tests using too many files
* Move dummy eth1 backend flag
* Ensure all tests pass
* Add ganache-cli to Dockerfile
* Use a special docker hub image for testing
* Appease clippy
* Move validator client into lighthouse binary
* Allow starting with dummy eth1 backend
* Improve logging
* Fix dummy eth1 backend from cli
* Add extra testnet command
* Ensure consistent spec in beacon node
* Update eth1 rig to work on goerli
* Tidy lcli, start adding support for yaml config
* Add incomplete YamlConfig struct
* Remove efforts at YamlConfig
* Add incomplete eth1 voting. Blocked on spec issues
* Add (untested) first pass at eth1 vote algo
* Add tests for winning vote
* Add more tests for eth1 chain
* Add more eth1 voting tests
* Added more eth1 voting testing
* Change test name
* Add more tests to eth1 chain
* Tidy eth1 generics, add more tests
* Improve comments
* Tidy beacon_node tests
* Tidy, rename JsonRpc.. to Caching..
* Tidy voting logic
* Tidy builder docs
* Add comments, tidy eth1
* Add more comments to eth1
* Fix bug with winning_vote
* Add doc comments to the `ClientBuilder`
* Remove commented-out code
* Improve `ClientBuilder` docs
* Add comments to client config
* Add decoding test for `ClientConfig`
* Remove unused `DepositSet` struct
* Tidy `block_cache`
* Remove commented out lines
* Remove unused code in `eth1` crate
* Remove old validator binary `main.rs`
* Tidy, fix tests compile error
* Add initial tests for get_deposits
* Remove dead code in eth1_test_rig
* Update TestingDepositBuilder
* Add testing for getting eth1 deposits
* Fix duplicate rand dep
* Remove dead code
* Remove accidentally-added files
* Fix comment in eth1_genesis_service
* Add .gitignore for eth1_test_rig
* Fix bug in eth1_genesis_service
* Remove dead code from eth2_config
* Fix tabs/spaces in root Cargo.toml
* Tidy eth1 crate
* Allow for re-use of eth1 service after genesis
* Update docs for new CLI
* Change README gif
* Tidy eth1 http module
* Tidy eth1 service
* Tidy environment crate
* Remove unused file
* Tidy, add comments
* Remove commented-out code
* Address majority of Michael's comments
* Address other PR comments
* Add link to issue alongside TODO
