## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/3270
## Proposed Changes
Optimize the calculation of historic beacon committees in the HTTP API.
This is achieved by allowing committee caches to be constructed for historic epochs, and constructing these committee caches on the fly in the API. This is much faster than reconstructing the state at the requested epoch, which usually takes upwards of 20s, and sometimes minutes with SPRP=8192. The depth of the `randao_mixes` array allows us to look back 64K epochs/0.8 years from a single state, which is pretty awesome!
We always use the `state_id` provided by the caller, but will return a nice 400 error if the epoch requested is out of range for the state requested, e.g.
```bash
# Prater
curl "http://localhost:5052/eth/v1/beacon/states/3170304/committees?epoch=33538"
```
```json
{"code":400,"message":"BAD_REQUEST: epoch out of bounds, try state at slot 1081344","stacktraces":[]}
```
Queries will be fastest when aligned to `slot % SPRP == 0`, so the hint suggests a slot that is 0 mod 8192.
## Overview
This rather extensive PR achieves two primary goals:
1. Uses the finalized/justified checkpoints of fork choice (FC), rather than that of the head state.
2. Refactors fork choice, block production and block processing to `async` functions.
Additionally, it achieves:
- Concurrent forkchoice updates to the EL and cache pruning after a new head is selected.
- Concurrent "block packing" (attestations, etc) and execution payload retrieval during block production.
- Concurrent per-block-processing and execution payload verification during block processing.
- The `Arc`-ification of `SignedBeaconBlock` during block processing (it's never mutated, so why not?):
- I had to do this to deal with sending blocks into spawned tasks.
- Previously we were cloning the beacon block at least 2 times during each block processing, these clones are either removed or turned into cheaper `Arc` clones.
- We were also `Box`-ing and un-`Box`-ing beacon blocks as they moved throughout the networking crate. This is not a big deal, but it's nice to avoid shifting things between the stack and heap.
- Avoids cloning *all the blocks* in *every chain segment* during sync.
- It also has the potential to clean up our code where we need to pass an *owned* block around so we can send it back in the case of an error (I didn't do much of this, my PR is already big enough 😅)
- The `BeaconChain::HeadSafetyStatus` struct was removed. It was an old relic from prior merge specs.
For motivation for this change, see https://github.com/sigp/lighthouse/pull/3244#issuecomment-1160963273
## Changes to `canonical_head` and `fork_choice`
Previously, the `BeaconChain` had two separate fields:
```
canonical_head: RwLock<Snapshot>,
fork_choice: RwLock<BeaconForkChoice>
```
Now, we have grouped these values under a single struct:
```
canonical_head: CanonicalHead {
cached_head: RwLock<Arc<Snapshot>>,
fork_choice: RwLock<BeaconForkChoice>
}
```
Apart from ergonomics, the only *actual* change here is wrapping the canonical head snapshot in an `Arc`. This means that we no longer need to hold the `cached_head` (`canonical_head`, in old terms) lock when we want to pull some values from it. This was done to avoid deadlock risks by preventing functions from acquiring (and holding) the `cached_head` and `fork_choice` locks simultaneously.
## Breaking Changes
### The `state` (root) field in the `finalized_checkpoint` SSE event
Consider the scenario where epoch `n` is just finalized, but `start_slot(n)` is skipped. There are two state roots we might in the `finalized_checkpoint` SSE event:
1. The state root of the finalized block, which is `get_block(finalized_checkpoint.root).state_root`.
4. The state root at slot of `start_slot(n)`, which would be the state from (1), but "skipped forward" through any skip slots.
Previously, Lighthouse would choose (2). However, we can see that when [Teku generates that event](de2b2801c8/data/beaconrestapi/src/main/java/tech/pegasys/teku/beaconrestapi/handlers/v1/events/EventSubscriptionManager.java (L171-L182)) it uses [`getStateRootFromBlockRoot`](de2b2801c8/data/provider/src/main/java/tech/pegasys/teku/api/ChainDataProvider.java (L336-L341)) which uses (1).
I have switched Lighthouse from (2) to (1). I think it's a somewhat arbitrary choice between the two, where (1) is easier to compute and is consistent with Teku.
## Notes for Reviewers
I've renamed `BeaconChain::fork_choice` to `BeaconChain::recompute_head`. Doing this helped ensure I broke all previous uses of fork choice and I also find it more descriptive. It describes an action and can't be confused with trying to get a reference to the `ForkChoice` struct.
I've changed the ordering of SSE events when a block is received. It used to be `[block, finalized, head]` and now it's `[block, head, finalized]`. It was easier this way and I don't think we were making any promises about SSE event ordering so it's not "breaking".
I've made it so fork choice will run when it's first constructed. I did this because I wanted to have a cached version of the last call to `get_head`. Ensuring `get_head` has been run *at least once* means that the cached values doesn't need to wrapped in an `Option`. This was fairly simple, it just involved passing a `slot` to the constructor so it knows *when* it's being run. When loading a fork choice from the store and a slot clock isn't handy I've just used the `slot` that was saved in the `fork_choice_store`. That seems like it would be a faithful representation of the slot when we saved it.
I added the `genesis_time: u64` to the `BeaconChain`. It's small, constant and nice to have around.
Since we're using FC for the fin/just checkpoints, we no longer get the `0x00..00` roots at genesis. You can see I had to remove a work-around in `ef-tests` here: b56be3bc2. I can't find any reason why this would be an issue, if anything I think it'll be better since the genesis-alias has caught us out a few times (0x00..00 isn't actually a real root). Edit: I did find a case where the `network` expected the 0x00..00 alias and patched it here: 3f26ac3e2.
You'll notice a lot of changes in tests. Generally, tests should be functionally equivalent. Here are the things creating the most diff-noise in tests:
- Changing tests to be `tokio::async` tests.
- Adding `.await` to fork choice, block processing and block production functions.
- Refactor of the `canonical_head` "API" provided by the `BeaconChain`. E.g., `chain.canonical_head.cached_head()` instead of `chain.canonical_head.read()`.
- Wrapping `SignedBeaconBlock` in an `Arc`.
- In the `beacon_chain/tests/block_verification`, we can't use the `lazy_static` `CHAIN_SEGMENT` variable anymore since it's generated with an async function. We just generate it in each test, not so efficient but hopefully insignificant.
I had to disable `rayon` concurrent tests in the `fork_choice` tests. This is because the use of `rayon` and `block_on` was causing a panic.
Co-authored-by: Mac L <mjladson@pm.me>
## Issue Addressed
NA
## Proposed Changes
This is a fairly simple micro-optimization to avoid using `Vec::grow`. I don't believe this will have a substantial effect on block processing times, however it was showing up in flamegraphs. I think it's worth making this change for general memory-hygiene.
## Additional Info
NA
## Issue Addressed
This PR is a subset of the changes in #3134. Unstable will still not function correctly with the new builder spec once this is merged, #3134 should be used on testnets
## Proposed Changes
- Removes redundancy in "builders" (servers implementing the builder spec)
- Renames `payload-builder` flag to `builder`
- Moves from old builder RPC API to new HTTP API, but does not implement the validator registration API (implemented in https://github.com/sigp/lighthouse/pull/3194)
Co-authored-by: sean <seananderson33@gmail.com>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
Lays the groundwork for builder API changes by implementing the beacon-API's new `register_validator` endpoint
## Proposed Changes
- Add a routine in the VC that runs on startup (re-try until success), once per epoch or whenever `suggested_fee_recipient` is updated, signing `ValidatorRegistrationData` and sending it to the BN.
- TODO: `gas_limit` config options https://github.com/ethereum/builder-specs/issues/17
- BN only sends VC registration data to builders on demand, but VC registration data *does update* the BN's prepare proposer cache and send an updated fcU to a local EE. This is necessary for fee recipient consistency between the blinded and full block flow in the event of fallback. Having the BN only send registration data to builders on demand gives feedback directly to the VC about relay status. Also, since the BN has no ability to sign these messages anyways (so couldn't refresh them if it wanted), and validator registration is independent of the BN head, I think this approach makes sense.
- Adds upcoming consensus spec changes for this PR https://github.com/ethereum/consensus-specs/pull/2884
- I initially applied the bit mask based on a configured application domain.. but I ended up just hard coding it here instead because that's how it's spec'd in the builder repo.
- Should application mask appear in the api?
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
- Uses a `Vec` in `SingleEpochParticipationCache` rather than `HashMap` to speed up processing times at the cost of memory usage.
- Cache the result of `integer_sqrt` rather than recomputing for each validator.
- Cache `state.previous_epoch` rather than recomputing it for each validator.
### Benchmarks
Benchmarks on a recent mainnet state using #3252 to get timing.
#### Without this PR
```
lcli skip-slots --state-path /tmp/state-0x3cdc.ssz --partial-state-advance --slots 32 --state-root 0x3cdc33cd02713d8d6cc33a6dbe2d3a5bf9af1d357de0d175a403496486ff845e --runs 10
[2022-06-09T08:21:02Z INFO lcli::skip_slots] Using mainnet spec
[2022-06-09T08:21:02Z INFO lcli::skip_slots] Advancing 32 slots
[2022-06-09T08:21:02Z INFO lcli::skip_slots] Doing 10 runs
[2022-06-09T08:21:02Z INFO lcli::skip_slots] State path: "/tmp/state-0x3cdc.ssz"
SSZ decoding /tmp/state-0x3cdc.ssz: 43ms
[2022-06-09T08:21:03Z INFO lcli::skip_slots] Run 0: 245.718794ms
[2022-06-09T08:21:03Z INFO lcli::skip_slots] Run 1: 245.364782ms
[2022-06-09T08:21:03Z INFO lcli::skip_slots] Run 2: 255.866179ms
[2022-06-09T08:21:04Z INFO lcli::skip_slots] Run 3: 243.838909ms
[2022-06-09T08:21:04Z INFO lcli::skip_slots] Run 4: 250.431425ms
[2022-06-09T08:21:04Z INFO lcli::skip_slots] Run 5: 248.68765ms
[2022-06-09T08:21:04Z INFO lcli::skip_slots] Run 6: 262.051113ms
[2022-06-09T08:21:05Z INFO lcli::skip_slots] Run 7: 264.293967ms
[2022-06-09T08:21:05Z INFO lcli::skip_slots] Run 8: 293.202007ms
[2022-06-09T08:21:05Z INFO lcli::skip_slots] Run 9: 264.552017ms
```
#### With this PR:
```
lcli skip-slots --state-path /tmp/state-0x3cdc.ssz --partial-state-advance --slots 32 --state-root 0x3cdc33cd02713d8d6cc33a6dbe2d3a5bf9af1d357de0d175a403496486ff845e --runs 10
[2022-06-09T08:57:59Z INFO lcli::skip_slots] Run 0: 73.898678ms
[2022-06-09T08:57:59Z INFO lcli::skip_slots] Run 1: 75.536978ms
[2022-06-09T08:57:59Z INFO lcli::skip_slots] Run 2: 75.176104ms
[2022-06-09T08:57:59Z INFO lcli::skip_slots] Run 3: 76.460828ms
[2022-06-09T08:57:59Z INFO lcli::skip_slots] Run 4: 75.904195ms
[2022-06-09T08:58:00Z INFO lcli::skip_slots] Run 5: 75.53077ms
[2022-06-09T08:58:00Z INFO lcli::skip_slots] Run 6: 74.745572ms
[2022-06-09T08:58:00Z INFO lcli::skip_slots] Run 7: 75.823489ms
[2022-06-09T08:58:00Z INFO lcli::skip_slots] Run 8: 74.892055ms
[2022-06-09T08:58:00Z INFO lcli::skip_slots] Run 9: 76.333569ms
```
## Additional Info
NA
## Proposed Changes
Reduce post-merge disk usage by not storing finalized execution payloads in Lighthouse's database.
⚠️ **This is achieved in a backwards-incompatible way for networks that have already merged** ⚠️. Kiln users and shadow fork enjoyers will be unable to downgrade after running the code from this PR. The upgrade migration may take several minutes to run, and can't be aborted after it begins.
The main changes are:
- New column in the database called `ExecPayload`, keyed by beacon block root.
- The `BeaconBlock` column now stores blinded blocks only.
- Lots of places that previously used full blocks now use blinded blocks, e.g. analytics APIs, block replay in the DB, etc.
- On finalization:
- `prune_abanonded_forks` deletes non-canonical payloads whilst deleting non-canonical blocks.
- `migrate_db` deletes finalized canonical payloads whilst deleting finalized states.
- Conversions between blinded and full blocks are implemented in a compositional way, duplicating some work from Sean's PR #3134.
- The execution layer has a new `get_payload_by_block_hash` method that reconstructs a payload using the EE's `eth_getBlockByHash` call.
- I've tested manually that it works on Kiln, using Geth and Nethermind.
- This isn't necessarily the most efficient method, and new engine APIs are being discussed to improve this: https://github.com/ethereum/execution-apis/pull/146.
- We're depending on the `ethers` master branch, due to lots of recent changes. We're also using a workaround for https://github.com/gakonst/ethers-rs/issues/1134.
- Payload reconstruction is used in the HTTP API via `BeaconChain::get_block`, which is now `async`. Due to the `async` fn, the `blocking_json` wrapper has been removed.
- Payload reconstruction is used in network RPC to serve blocks-by-{root,range} responses. Here the `async` adjustment is messier, although I think I've managed to come up with a reasonable compromise: the handlers take the `SendOnDrop` by value so that they can drop it on _task completion_ (after the `fn` returns). Still, this is introducing disk reads onto core executor threads, which may have a negative performance impact (thoughts appreciated).
## Additional Info
- [x] For performance it would be great to remove the cloning of full blocks when converting them to blinded blocks to write to disk. I'm going to experiment with a `put_block` API that takes the block by value, breaks it into a blinded block and a payload, stores the blinded block, and then re-assembles the full block for the caller.
- [x] We should measure the latency of blocks-by-root and blocks-by-range responses.
- [x] We should add integration tests that stress the payload reconstruction (basic tests done, issue for more extensive tests: https://github.com/sigp/lighthouse/issues/3159)
- [x] We should (manually) test the schema v9 migration from several prior versions, particularly as blocks have changed on disk and some migrations rely on being able to load blocks.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Proposed Changes
I did some gardening 🌳 in our dependency tree:
- Remove duplicate versions of `warp` (git vs patch)
- Remove duplicate versions of lots of small deps: `cpufeatures`, `ethabi`, `ethereum-types`, `bitvec`, `nix`, `libsecp256k1`.
- Update MDBX (should resolve#3028). I tested and Lighthouse compiles on Windows 11 now.
- Restore `psutil` back to upstream
- Make some progress updating everything to rand 0.8. There are a few crates stuck on 0.7.
Hopefully this puts us on a better footing for future `cargo audit` issues, and improves compile times slightly.
## Additional Info
Some crates are held back by issues with `zeroize`. libp2p-noise depends on [`chacha20poly1305`](https://crates.io/crates/chacha20poly1305) which depends on zeroize < v1.5, and we can only have one version of zeroize because it's post 1.0 (see https://github.com/rust-lang/cargo/issues/6584). The latest version of `zeroize` is v1.5.4, which is used by the new versions of many other crates (e.g. `num-bigint-dig`). Once a new version of chacha20poly1305 is released we can update libp2p-noise and upgrade everything to the latest `zeroize` version.
I've also opened a PR to `blst` related to zeroize: https://github.com/supranational/blst/pull/111
## Proposed Changes
Mitigate the fork choice attacks described in [_Three Attacks on Proof-of-Stake Ethereum_](https://arxiv.org/abs/2110.10086) by enabling proposer boost @ 70% on mainnet.
Proposer boost has been running with stability on Prater for a few months now, and is safe to roll out gradually on mainnet. I'll argue that the financial impact of rolling out gradually is also minimal.
Consider how a proposer-boosted validator handles two types of re-orgs:
## Ex ante re-org (from the paper)
In the mitigated attack, a malicious proposer releases their block at slot `n + 1` late so that it re-orgs the block at the slot _after_ them (at slot `n + 2`). Non-boosting validators will follow this re-org and vote for block `n + 1` in slot `n + 2`. Boosted validators will vote for `n + 2`. If the boosting validators are outnumbered, there'll be a re-org to the malicious block from `n + 1` and validators applying the boost will have their slot `n + 2` attestations miss head (and target on an epoch boundary). Note that all the attesters from slot `n + 1` are doomed to lose their head vote rewards, but this is the same regardless of boosting.
Therefore, Lighthouse nodes stand to miss slightly more head votes than other nodes if they are in the minority while applying the proposer boost. Once the proposer boost nodes gain a majority, this trend reverses.
## Ex post re-org (using the boost)
The other type of re-org is an ex post re-org using the strategy described here: https://github.com/sigp/lighthouse/pull/2860. With this strategy, boosted nodes will follow the attempted re-org and again lose a head vote if the re-org is unsuccessful. Once boosting is widely adopted, the re-orgs will succeed and the non-boosting validators will lose out.
I don't think there are (m)any validators applying this strategy, because it is irrational to attempt it before boosting is widely adopted. Therefore I think we can safely ignore this possibility.
## Risk Assessment
From observing re-orgs on mainnet I don't think ex ante re-orgs are very common. I've observed around 1 per day for the last month on my node (see: https://gist.github.com/michaelsproul/3b2142fa8fe0ff767c16553f96959e8c), compared to 2.5 ex post re-orgs per day.
Given one extra slot per day where attesting will cause a missed head vote, each individual validator has a 1/32 chance of being assigned to that slot. So we have an increase of 1/32 missed head votes per validator per day in expectation. Given that we currently see ~7 head vote misses per validator per day due to late/missing blocks (and re-orgs), this represents only a (1/32)/7 = 0.45% increase in missed head votes in expectation. I believe this is so small that we shouldn't worry about it. Particularly as getting proposer boost deployed is good for network health and may enable us to drive down the number of late blocks over time (which will decrease head vote misses).
## TL;DR
Enable proposer boost now and release ASAP, as financial downside is a 0.45% increase in missed head votes until widespread adoption.
## Issue Addressed
MEV boost compatibility
## Proposed Changes
See #2987
## Additional Info
This is blocked on the stabilization of a couple specs, [here](https://github.com/ethereum/beacon-APIs/pull/194) and [here](https://github.com/flashbots/mev-boost/pull/20).
Additional TODO's and outstanding questions
- [ ] MEV boost JWT Auth
- [ ] Will `builder_proposeBlindedBlock` return the revealed payload for the BN to propogate
- [ ] Should we remove `private-tx-proposals` flag and communicate BN <> VC with blinded blocks by default once these endpoints enter the beacon-API's repo? This simplifies merge transition logic.
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
#3073
## Proposed Changes
Add around `SAFE_SLOTS_TO_IMPORT_OPTIMISTICALLY` in the API
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
As discussed on last-night's consensus call, the testnets next week will target the [Kiln Spec v2](https://hackmd.io/@n0ble/kiln-spec).
Presently, we support Kiln V1. V2 is backwards compatible, except for renaming `random` to `prev_randao` in:
- https://github.com/ethereum/execution-apis/pull/180
- https://github.com/ethereum/consensus-specs/pull/2835
With this PR we'll no longer be compatible with the existing Kintsugi and Kiln testnets, however we'll be ready for the testnets next week. I raised this breaking change in the call last night, we are all keen to move forward and break things.
We now target the [`merge-kiln-v2`](https://github.com/MariusVanDerWijden/go-ethereum/tree/merge-kiln-v2) branch for interop with Geth. This required adding the `--http.aauthport` to the tester to avoid a port conflict at startup.
### Changes to exec integration tests
There's some change in the `merge-kiln-v2` version of Geth that means it can't compile on a vanilla Github runner. Bumping the `go` version on the runner solved this issue.
Whilst addressing this, I refactored the `testing/execution_integration` crate to be a *binary* rather than a *library* with tests. This means that we don't need to run the `build.rs` and build Geth whenever someone runs `make lint` or `make test-release`. This is nice for everyday users, but it's also nice for CI so that we can have a specific runner for these tests and we don't need to ensure *all* runners support everything required to build all execution clients.
## More Info
- [x] ~~EF tests are failing since the rename has broken some tests that reference the old field name. I have been told there will be new tests released in the coming days (25/02/22 or 26/02/22).~~
## Description
This PR adds a single, trivial commit (f5d2b27d78349d5a675a2615eba42cc9ae708094) atop #2986 to resolve a tests compile error. The original author (@ethDreamer) is AFK so I'm getting this one merged ☺️
Please see #2986 for more information about the other, significant changes in this PR.
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
Co-authored-by: ethDreamer <37123614+ethDreamer@users.noreply.github.com>
## Issue Addressed
NA
## Proposed Changes
Adds the functionality to allow blocks to be validated/invalidated after their import as per the [optimistic sync spec](https://github.com/ethereum/consensus-specs/blob/dev/sync/optimistic.md#how-to-optimistically-import-blocks). This means:
- Updating `ProtoArray` to allow flipping the `execution_status` of ancestors/descendants based on payload validity updates.
- Creating separation between `execution_layer` and the `beacon_chain` by creating a `PayloadStatus` struct.
- Refactoring how the `execution_layer` selects a `PayloadStatus` from the multiple statuses returned from multiple EEs.
- Adding testing framework for optimistic imports.
- Add `ExecutionBlockHash(Hash256)` new-type struct to avoid confusion between *beacon block roots* and *execution payload hashes*.
- Add `merge` to [`FORKS`](c3a793fd73/Makefile (L17)) in the `Makefile` to ensure we test the beacon chain with merge settings.
- Fix some tests here that were failing due to a missing execution layer.
## TODO
- [ ] Balance tests
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
## Proposed Changes
Lots of lint updates related to `flat_map`, `unwrap_or_else` and string patterns. I did a little more creative refactoring in the op pool, but otherwise followed Clippy's suggestions.
## Additional Info
We need this PR to unblock CI.
## Issue Addressed
Alternative to #2935
## Proposed Changes
Replace the `Vec<u8>` inside `Bitfield` with a `SmallVec<[u8; 32>`. This eliminates heap allocations for attestation bitfields until we reach 500K validators, at which point we can consider increasing `SMALLVEC_LEN` to 40 or 48.
While running Lighthouse under `heaptrack` I found that SSZ encoding and decoding of bitfields corresponded to 22% of all allocations by count. I've confirmed that with this change applied those allocations disappear entirely.
## Additional Info
We can win another 8 bytes of space by using `smallvec`'s [`union` feature](https://docs.rs/smallvec/1.8.0/smallvec/#union), although I might leave that for a future PR because I don't know how experimental that feature is and whether it uses some spicy `unsafe` blocks.
## Issue Addressed
Closes#3014
## Proposed Changes
- Rename `receipt_root` to `receipts_root`
- Rename `execute_payload` to `notify_new_payload`
- This is slightly weird since we modify everything except the actual HTTP call to the engine API. That change is expected to be implemented in #2985 (cc @ethDreamer)
- Enable "random" tests for Bellatrix.
## Notes
This will break *partially* compatibility with Kintusgi testnets in order to gain compatibility with [Kiln](https://hackmd.io/@n0ble/kiln-spec) testnets. I think it will only break the BN APIs due to the `receipts_root` change, however it might have some other effects too.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
#2883
## Proposed Changes
* Added `suggested-fee-recipient` & `suggested-fee-recipient-file` flags to validator client (similar to graffiti / graffiti-file implementation).
* Added proposer preparation service to VC, which sends the fee-recipient of all known validators to the BN via [/eth/v1/validator/prepare_beacon_proposer](https://github.com/ethereum/beacon-APIs/pull/178) api once per slot
* Added [/eth/v1/validator/prepare_beacon_proposer](https://github.com/ethereum/beacon-APIs/pull/178) api endpoint and preparation data caching
* Added cleanup routine to remove cached proposer preparations when not updated for 2 epochs
## Additional Info
Changed the Implementation following the discussion in #2883.
Co-authored-by: pk910 <philipp@pk910.de>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Co-authored-by: Philipp K <philipp@pk910.de>
## Issue Addressed
N/A
## Proposed Changes
https://github.com/sigp/lighthouse/pull/2940 introduced a bug where we parsed the uint256 terminal total difficulty as a hex string instead of a decimal string. Fixes the bug and adds tests.
## Proposed Changes
Add a new hardcoded spec for the Gnosis Beacon Chain.
Ideally, official Lighthouse executables will be able to connect to the gnosis beacon chain from now on, using `--network gnosis` CLI option.
## Issue Addressed
Continuation to #2934
## Proposed Changes
Currently, we have the transition fields in the config (`TERMINAL_TOTAL_DIFFICULTY`, `TERMINAL_BLOCK_HASH` and `TERMINAL_BLOCK_HASH_ACTIVATION_EPOCH`) as mandatory fields.
This is causing compatibility issues with other client BN's (nimbus and teku v22.1.0) which don't return these fields on a `eth/v1/config/spec` api call. Since we don't use this values until the merge, I think it's okay to have default values set for these fields as well to ensure compatibility.
## Issue Addressed
#2900
## Proposed Changes
Change type of extra_fields in ConfigAndPreset so it can contain non string values (inside serde_json::Value)
## Proposed Changes
Restore compatibility with beacon nodes using the `MERGE` naming by:
1. Adding defaults for the Bellatrix `Config` fields
2. Not attempting to read (or serve) the Bellatrix preset on `/config/spec`.
I've confirmed that this works with Infura, and just logs a warning:
```
Jan 20 10:51:31.078 INFO Connected to beacon node endpoint: https://eth2-beacon-mainnet.infura.io/, version: teku/v22.1.0/linux-x86_64/-eclipseadoptium-openjdk64bitservervm-java-17
Jan 20 10:51:31.344 WARN Beacon node config does not match exactly, advice: check that the BN is updated and configured for any upcoming forks, endpoint: https://eth2-beacon-mainnet.infura.io/
Jan 20 10:51:31.344 INFO Initialized beacon node connections available: 1, total: 1
```
## Proposed Changes
Change the canonical fork name for the merge to Bellatrix. Keep other merge naming the same to avoid churn.
I've also fixed and enabled the `fork` and `transition` tests for Bellatrix, and the v1.1.7 fork choice tests.
Additionally, the `BellatrixPreset` has been added with tests. It gets served via the `/config/spec` API endpoint along with the other presets.
## Proposed Changes
Allocate less memory in sync by hashing the `SignedBeaconBlock`s in a batch directly, rather than going via SSZ bytes.
Credit to @paulhauner for finding this source of temporary allocations.
## Issue Addressed
Restore compatibility between Lighthouse v2.0.1 VC and `unstable` BN in preparation for the next release.
## Proposed Changes
* Don't serialize the `PROPOSER_SCORE_BOOST` as `null` because it breaks the `extra_fields: HashMap<String, String>` used by the v2.0.1 VC.
## Proposed Changes
Update `superstruct` to bring in @realbigsean's fixes necessary for MEV-compatible private beacon block types (a la #2795).
The refactoring is due to another change in superstruct that allows partial getters to be auto-generated.
## Issue Addressed
Resolves: https://github.com/sigp/lighthouse/issues/2741
Includes: https://github.com/sigp/lighthouse/pull/2853 so that we can get ssz static tests passing here on v1.1.6. If we want to merge that first, we can make this diff slightly smaller
## Proposed Changes
- Changes the `justified_epoch` and `finalized_epoch` in the `ProtoArrayNode` each to an `Option<Checkpoint>`. The `Option` is necessary only for the migration, so not ideal. But does allow us to add a default logic to `None` on these fields during the database migration.
- Adds a database migration from a legacy fork choice struct to the new one, search for all necessary block roots in fork choice by iterating through blocks in the db.
- updates related to https://github.com/ethereum/consensus-specs/pull/2727
- We will have to update the persisted forkchoice to make sure the justified checkpoint stored is correct according to the updated fork choice logic. This boils down to setting the forkchoice store's justified checkpoint to the justified checkpoint of the block that advanced the finalized checkpoint to the current one.
- AFAICT there's no migration steps necessary for the update to allow applying attestations from prior blocks, but would appreciate confirmation on that
- I updated the consensus spec tests to v1.1.6 here, but they will fail until we also implement the proposer score boost updates. I confirmed that the previously failing scenario `new_finalized_slot_is_justified_checkpoint_ancestor` will now pass after the boost updates, but haven't confirmed _all_ tests will pass because I just quickly stubbed out the proposer boost test scenario formatting.
- This PR now also includes proposer boosting https://github.com/ethereum/consensus-specs/pull/2730
## Additional Info
I realized checking justified and finalized roots in fork choice makes it more likely that we trigger this bug: https://github.com/ethereum/consensus-specs/pull/2727
It's possible the combination of justified checkpoint and finalized checkpoint in the forkchoice store is different from in any block in fork choice. So when trying to startup our store's justified checkpoint seems invalid to the rest of fork choice (but it should be valid). When this happens we get an `InvalidBestNode` error and fail to start up. So I'm including that bugfix in this branch.
Todo:
- [x] Fix fork choice tests
- [x] Self review
- [x] Add fix for https://github.com/ethereum/consensus-specs/pull/2727
- [x] Rebase onto Kintusgi
- [x] Fix `num_active_validators` calculation as @michaelsproul pointed out
- [x] Clean up db migrations
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
N/A
## Proposed Changes
Changes required for the `merge-devnet-3`. Added some more non substantive renames on top of @realbigsean 's commit.
Note: this doesn't include the proposer boosting changes in kintsugi v3.
This devnet isn't running with the proposer boosting fork choice changes so if we are looking to merge https://github.com/sigp/lighthouse/pull/2822 into `unstable`, then I think we should just maintain this branch for the devnet temporarily.
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Fix max packet sizes
Fix max_payload_size function
Add merge block test
Fix max size calculation; fix up test
Clear comments
Add a payload_size_function
Use safe arith for payload calculation
Return an error if block too big in block production
Separate test to check if block is over limit
* Change base_fee_per_gas to Uint256
* Add custom (de)serialization to ExecutionPayload
* Fix errors
* Add a quoted_u256 module
* Remove unused function
* lint
* Add test
* Remove extra line
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Fix arbitrary check kintsugi
* Add merge chain spec fields, and a function to determine which constant to use based on the state variant
* increment spec test version
* Remove `Transaction` enum wrapper
* Remove Transaction new-type
* Remove gas validations
* Add `--terminal-block-hash-epoch-override` flag
* Increment spec tests version to 1.1.5
* Remove extraneous gossip verification https://github.com/ethereum/consensus-specs/pull/2687
* - Remove unused Error variants
- Require both "terminal-block-hash-epoch-override" and "terminal-block-hash-override" when either flag is used
* - Remove a couple more unused Error variants
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* update initializing from eth1 for merge genesis
* read execution payload header from file lcli
* add `create-payload-header` command to `lcli`
* fix base fee parsing
* Apply suggestions from code review
* default `execution_payload_header` bool to false when deserializing `meta.yml` in EF tests
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Thread eth1_block_hash into interop genesis state
* Add merge-fork-epoch flag
* Build LH with minimal spec by default
* Add verbose logs to execution_layer
* Add --http-allow-sync-stalled flag
* Update lcli new-testnet to create genesis state
* Fix http test
* Fix compile errors in tests
