## Issue Addressed
NA
## Proposed Changes
In https://github.com/sigp/lighthouse/pull/2832 we made some changes to the `SnapshotCache` to help deal with the one-block reorgs seen on mainnet (and testnets).
I believe the change in #2832 is good and we should keep it, but I think that in its present form it is causing the `SnapshotCache` to hold onto states that it doesn't need anymore. For example, a skip slot will result in one more `BeaconSnapshot` being stored in the cache.
This PR adds a new type of pruning that happens after a block is inserted to the cache. We will remove any snapshot from the cache that is a *grandparent* of the block being imported. Since we know the grandparent has two valid blocks built atop it, it is not at risk from a one-block re-org.
## Additional Info
NA
## Proposed Changes
Allocate less memory in sync by hashing the `SignedBeaconBlock`s in a batch directly, rather than going via SSZ bytes.
Credit to @paulhauner for finding this source of temporary allocations.
## Issue Addressed
The PeerDB was getting out of sync with the number of disconnected peers compared to the actual count. As this value determines how many we store in our cache, over time the cache was depleting and we were removing peers immediately resulting in errors that manifest as unknown peers for some operations.
The error occurs when dialing a peer fails, we were not correctly updating the peerdb counter because the increment to the counter was placed in the wrong order and was therefore not incrementing the count.
This PR corrects this.
There is a pretty significant tradeoff between bandwidth and speed of gossipsub messages.
We can reduce our bandwidth usage considerably at the cost of minimally delaying gossipsub messages. The impact of delaying messages has not been analyzed thoroughly yet, however this PR in conjunction with some gossipsub updates show considerable bandwidth reduction.
This PR allows the user to set a CLI value (`network-load`) which is an integer in the range of 1 of 5 depending on their bandwidth appetite. 1 represents the least bandwidth but slowest message recieving and 5 represents the most bandwidth and fastest received message time.
For low-bandwidth users it is likely to be more efficient to use a lower value. The default is set to 3, which currently represents a reduced bandwidth usage compared to previous version of this PR. The previous lighthouse versions are equivalent to setting the `network-load` CLI to 4.
This PR is awaiting a few gossipsub updates before we can get it into lighthouse.
## Issue Addressed
- Resolves https://github.com/sigp/lighthouse/issues/2902
## Proposed Changes
As documented in https://github.com/sigp/lighthouse/issues/2902, there are some cases where we will score peers very harshly for sending attestations to an unknown head.
This PR removes the penalty when an attestation for an unknown head is received, queued for block look-up, then popped from the queue without the head block being known. This prevents peers from being penalized for an unknown block when that peer was never actually asked for the block.
Peer penalties should still be applied to the peers who *do* get the request for the block and fail to respond with a valid block. As such, peers who send us attestations to non-existent heads should eventually be booted.
## Additional Info
- [ ] Need to confirm that a timeout for a bbroot request will incur a penalty.
## Issue Addressed
NA
## Proposed Changes
We have observed occasions were under-resourced nodes will receive messages that were valid *at the time*, but later become invalidated due to long waits for a `BeaconProcessor` worker.
In this PR, we will check to see if the message was valid *at the time of receipt*. If it was initially valid but invalid now, we just ignore the message without penalizing the peer.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
I've observed some Prater nodes (and potentially some mainnet nodes) banning peers due to validator pubkey cache lock timeouts. For the `BeaconChainError`-type of errors, they're caused by internal faults and we can't necessarily tell if the peer is bad or not. I think this is causing us to ban peers unnecessarily when running on under-resourced machines.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Introduces a cache to attestation to produce atop blocks which will become the head, but are not fully imported (e.g., not inserted into the database).
Whilst attesting to a block before it's imported is rather easy, if we're going to produce that attestation then we also need to be able to:
1. Verify that attestation.
1. Respond to RPC requests for the `beacon_block_root`.
Attestation verification (1) is *partially* covered. Since we prime the shuffling cache before we insert the block into the early attester cache, we should be fine for all typical use-cases. However, it is possible that the cache is washed out before we've managed to insert the state into the database and then attestation verification will fail with a "missing beacon state"-type error.
Providing the block via RPC (2) is also partially covered, since we'll check the database *and* the early attester cache when responding a blocks-by-root request. However, we'll still omit the block from blocks-by-range requests (until the block lands in the DB). I *think* this is fine, since there's no guarantee that we return all blocks for those responses.
Another important consideration is whether or not the *parent* of the early attester block is available in the databse. If it were not, we might fail to respond to blocks-by-root request that are iterating backwards to collect a chain of blocks. I argue that *we will always have the parent of the early attester block in the database.* This is because we are holding the fork-choice write-lock when inserting the block into the early attester cache and we do not drop that until the block is in the database.
## Issue Addressed
The fee-recipient argument of the beacon node does not allow a value to be specified:
> $ lighthouse beacon_node --merge --fee-recipient "0x332E43696A505EF45b9319973785F837ce5267b9"
> error: Found argument '0x332E43696A505EF45b9319973785F837ce5267b9' which wasn't expected, or isn't valid in this context
>
> USAGE:
> lighthouse beacon_node --fee-recipient --merge
>
> For more information try --help
## Proposed Changes
Allow specifying a value for the fee-recipient argument in beacon_node/src/cli.rs
## Additional Info
I've added .takes_value(true) and successfully proposed a block in the kintsugi testnet with my own fee-recipient address instead of the hardcoded default. I think that was just missed as the argument does not make sense without a value :)
Co-authored-by: pk910 <philipp@pk910.de>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
Ensures full roots are printed, rather than shortened versions like `0x935b…d376`.
For example, it would be nice if we could do API queries based upon the roots shown in the `Beacon chain re-org` event:
```
Jan 05 12:36:52.224 WARN Beacon chain re-org reorg_distance: 2, new_slot: 2073184, new_head: 0x8a97…2dec, new_head_parent: 0xa985…7688, previous_slot: 2073183, previous_head: 0x935b…d376, service: beacon
Jan 05 13:35:05.832 WARN Beacon chain re-org reorg_distance: 1, new_slot: 2073475, new_head: 0x9207…c6b9, new_head_parent: 0xb2ce…839b, previous_slot: 2073474, previous_head: 0x8066…92f7, service: beacon
```
## Additional Info
We should eventually fix this project-wide, however this is a short-term patch.
## Proposed Changes
Update `superstruct` to bring in @realbigsean's fixes necessary for MEV-compatible private beacon block types (a la #2795).
The refactoring is due to another change in superstruct that allows partial getters to be auto-generated.
## Issue Addressed
N/A
## Proposed Changes
We are currently treating errors from the EL on `engine_executePayload` as `PayloadVerificationStatus::NotVerified`. This adds the block as a candidate head block in fork choice even if the EL explicitly rejected the block as invalid.
`PayloadVerificationStatus::NotVerified` should be only returned when the EL explicitly returns "syncing" imo. This PR propagates an error instead of returning `NotVerified` on EL all EL errors.
## Issue Addressed
Closes#2286Closes#2538Closes#2342
## Proposed Changes
Part II of major slasher optimisations after #2767
These changes will be backwards-incompatible due to the move to MDBX (and the schema change) 😱
* [x] Shrink attester keys from 16 bytes to 7 bytes.
* [x] Shrink attester records from 64 bytes to 6 bytes.
* [x] Separate `DiskConfig` from regular `Config`.
* [x] Add configuration for the LRU cache size.
* [x] Add a "migration" that deletes any legacy LMDB database.
## Issue Addressed
Successor to #2431
## Proposed Changes
* Add a `BlockReplayer` struct to abstract over the intricacies of calling `per_slot_processing` and `per_block_processing` while avoiding unnecessary tree hashing.
* Add a variant of the forwards state root iterator that does not require an `end_state`.
* Use the `BlockReplayer` when reconstructing states in the database. Use the efficient forwards iterator for frozen states.
* Refactor the iterators to remove `Arc<HotColdDB>` (this seems to be neater than making _everything_ an `Arc<HotColdDB>` as I did in #2431).
Supplying the state roots allow us to avoid building a tree hash cache at all when reconstructing historic states, which saves around 1 second flat (regardless of `slots-per-restore-point`). This is a small percentage of worst-case state load times with 200K validators and SPRP=2048 (~15s vs ~16s) but a significant speed-up for more frequent restore points: state loads with SPRP=32 should be now consistently <500ms instead of 1.5s (a ~3x speedup).
## Additional Info
Required by https://github.com/sigp/lighthouse/pull/2628
## Issue Addressed
#2834
## Proposed Changes
Change log message severity from error to debug in attestation verification when attestation state is finalized.
## Issue Addressed
#2841
## Proposed Changes
Not counting dialing peers while deciding if we have reached the target peers in case of outbound peers.
## Additional Info
Checked this running in nodes and bandwidth looks normal, peer count looks normal too
## Proposed Changes
Remove the `is_first_block_in_epoch` logic from the balances cache update logic, as it was incorrect in the case of skipped slots. The updated code is simpler because regardless of whether the block is the first in the epoch we can check if an entry for the epoch boundary root already exists in the cache, and update the cache accordingly.
Additionally, to assist with flip-flopping justified epochs, move to cloning the balance cache rather than moving it. This should still be very fast in practice because the balances cache is a ~1.6MB `Vec`, and this operation is expected to only occur infrequently.
## Issue Addressed
Resolves: https://github.com/sigp/lighthouse/issues/2741
Includes: https://github.com/sigp/lighthouse/pull/2853 so that we can get ssz static tests passing here on v1.1.6. If we want to merge that first, we can make this diff slightly smaller
## Proposed Changes
- Changes the `justified_epoch` and `finalized_epoch` in the `ProtoArrayNode` each to an `Option<Checkpoint>`. The `Option` is necessary only for the migration, so not ideal. But does allow us to add a default logic to `None` on these fields during the database migration.
- Adds a database migration from a legacy fork choice struct to the new one, search for all necessary block roots in fork choice by iterating through blocks in the db.
- updates related to https://github.com/ethereum/consensus-specs/pull/2727
- We will have to update the persisted forkchoice to make sure the justified checkpoint stored is correct according to the updated fork choice logic. This boils down to setting the forkchoice store's justified checkpoint to the justified checkpoint of the block that advanced the finalized checkpoint to the current one.
- AFAICT there's no migration steps necessary for the update to allow applying attestations from prior blocks, but would appreciate confirmation on that
- I updated the consensus spec tests to v1.1.6 here, but they will fail until we also implement the proposer score boost updates. I confirmed that the previously failing scenario `new_finalized_slot_is_justified_checkpoint_ancestor` will now pass after the boost updates, but haven't confirmed _all_ tests will pass because I just quickly stubbed out the proposer boost test scenario formatting.
- This PR now also includes proposer boosting https://github.com/ethereum/consensus-specs/pull/2730
## Additional Info
I realized checking justified and finalized roots in fork choice makes it more likely that we trigger this bug: https://github.com/ethereum/consensus-specs/pull/2727
It's possible the combination of justified checkpoint and finalized checkpoint in the forkchoice store is different from in any block in fork choice. So when trying to startup our store's justified checkpoint seems invalid to the rest of fork choice (but it should be valid). When this happens we get an `InvalidBestNode` error and fail to start up. So I'm including that bugfix in this branch.
Todo:
- [x] Fix fork choice tests
- [x] Self review
- [x] Add fix for https://github.com/ethereum/consensus-specs/pull/2727
- [x] Rebase onto Kintusgi
- [x] Fix `num_active_validators` calculation as @michaelsproul pointed out
- [x] Clean up db migrations
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
N/A
## Proposed Changes
Changes required for the `merge-devnet-3`. Added some more non substantive renames on top of @realbigsean 's commit.
Note: this doesn't include the proposer boosting changes in kintsugi v3.
This devnet isn't running with the proposer boosting fork choice changes so if we are looking to merge https://github.com/sigp/lighthouse/pull/2822 into `unstable`, then I think we should just maintain this branch for the devnet temporarily.
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Proposed Changes
In the event of a late block, keep the block in the snapshot cache by cloning it. This helps us process new blocks quickly in the event the late block was re-org'd.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
We were calculating justified balances incorrectly on cache misses in `set_justified_checkpoint`
## Proposed Changes
Use the `get_effective_balances` method as opposed to `state.balances`, which returns exact balances
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
New rust lints
## Proposed Changes
- Boxing some enum variants
- removing some unused fields (is the validator lockfile unused? seemed so to me)
## Additional Info
- some error fields were marked as dead code but are logged out in areas
- left some dead fields in our ef test code because I assume they are useful for debugging?
Co-authored-by: realbigsean <seananderson33@gmail.com>
Fix max packet sizes
Fix max_payload_size function
Add merge block test
Fix max size calculation; fix up test
Clear comments
Add a payload_size_function
Use safe arith for payload calculation
Return an error if block too big in block production
Separate test to check if block is over limit
* Fix fork choice after rebase
* Remove paulhauner warp dep
* Fix fork choice test compile errors
* Assume fork choice payloads are valid
* Add comment
* Ignore new tests
* Fix error in test skipping
* Change base_fee_per_gas to Uint256
* Add custom (de)serialization to ExecutionPayload
* Fix errors
* Add a quoted_u256 module
* Remove unused function
* lint
* Add test
* Remove extra line
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Fix arbitrary check kintsugi
* Add merge chain spec fields, and a function to determine which constant to use based on the state variant
* increment spec test version
* Remove `Transaction` enum wrapper
* Remove Transaction new-type
* Remove gas validations
* Add `--terminal-block-hash-epoch-override` flag
* Increment spec tests version to 1.1.5
* Remove extraneous gossip verification https://github.com/ethereum/consensus-specs/pull/2687
* - Remove unused Error variants
- Require both "terminal-block-hash-epoch-override" and "terminal-block-hash-override" when either flag is used
* - Remove a couple more unused Error variants
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* update initializing from eth1 for merge genesis
* read execution payload header from file lcli
* add `create-payload-header` command to `lcli`
* fix base fee parsing
* Apply suggestions from code review
* default `execution_payload_header` bool to false when deserializing `meta.yml` in EF tests
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Add payload verification status to fork choice
* Pass payload verification status to import_block
* Add valid back-propagation
* Add head safety status latch to API
* Remove ExecutionLayerStatus
* Add execution info to client notifier
* Update notifier logs
* Change use of "hash" to refer to beacon block
* Shutdown on invalid finalized block
* Tidy, add comments
* Fix failing FC tests
* Allow blocks with unsafe head
* Fix forkchoiceUpdate call on startup
* Ignore payload errors
* Only return payload handle on valid response
* Push some engine logs down to debug
* Push ee fork choice log to debug
* Push engine call failure to debug
* Push some more errors to debug
* Fix panic at startup
