## Issue Addressed
https://github.com/sigp/lighthouse/issues/3091
Extends https://github.com/sigp/lighthouse/pull/3062, adding pre-bellatrix block support on blinded endpoints and allowing the normal proposal flow (local payload construction) on blinded endpoints. This resulted in better fallback logic because the VC will not have to switch endpoints on failure in the BN <> Builder API, the BN can just fallback immediately and without repeating block processing that it shouldn't need to. We can also keep VC fallback from the VC<>BN API's blinded endpoint to full endpoint.
## Proposed Changes
- Pre-bellatrix blocks on blinded endpoints
- Add a new `PayloadCache` to the execution layer
- Better fallback-from-builder logic
## Todos
- [x] Remove VC transition logic
- [x] Add logic to only enable builder flow after Merge transition finalization
- [x] Tests
- [x] Fix metrics
- [x] Rustdocs
Co-authored-by: Mac L <mjladson@pm.me>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
There are scenarios where the only viable head will have an invalid execution payload, in this scenario the `get_head` function on `proto_array` will return an error. We must recover from this scenario by importing blocks from the network.
This PR stops `BeaconChain::recompute_head` from returning an error so that we can't accidentally start down-scoring peers or aborting block import just because the current head has an invalid payload.
## Reviewer Notes
The following changes are included:
1. Allow `fork_choice.get_head` to fail gracefully in `BeaconChain::process_block` when trying to update the `early_attester_cache`; simply don't add the block to the cache rather than aborting the entire process.
1. Don't return an error from `BeaconChain::recompute_head_at_current_slot` and `BeaconChain::recompute_head` to defensively prevent calling functions from aborting any process just because the fork choice function failed to run.
- This should have practically no effect, since most callers were still continuing if recomputing the head failed.
- The outlier is that the API will return 200 rather than a 500 when fork choice fails.
1. Add the `ProtoArrayForkChoice::set_all_blocks_to_optimistic` function to recover from the scenario where we've rebooted and the persisted fork choice has an invalid head.
## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/3241
Closes https://github.com/sigp/lighthouse/issues/3242
## Proposed Changes
* [x] Implement logic to remove equivocating validators from fork choice per https://github.com/ethereum/consensus-specs/pull/2845
* [x] Update tests to v1.2.0-rc.1. The new test which exercises `equivocating_indices` is passing.
* [x] Pull in some SSZ abstractions from the `tree-states` branch that make implementing Vec-compatible encoding for types like `BTreeSet` and `BTreeMap`.
* [x] Implement schema upgrades and downgrades for the database (new schema version is V11).
* [x] Apply attester slashings from blocks to fork choice
## Additional Info
* This PR doesn't need the `BTreeMap` impl, but `tree-states` does, and I don't think there's any harm in keeping it. But I could also be convinced to drop it.
Blocked on #3322.
## Issue Addressed
Resolves#3151
## Proposed Changes
When fetching duties for sync committee contributions, check the value of `execution_optimistic` of the head block from the BN and refuse to sign any sync committee messages `if execution_optimistic == true`.
## Additional Info
- Is backwards compatible with older BNs
- Finding a way to add test coverage for this would be prudent. Open to suggestions.
## Issue Addressed
Add a flag that optionally enables unrealized vote tracking. Would like to test out on testnets and benchmark differences in methods of vote tracking. This PR includes a DB schema upgrade to enable to new vote tracking style.
Co-authored-by: realbigsean <sean@sigmaprime.io>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Co-authored-by: sean <seananderson33@gmail.com>
Co-authored-by: Mac L <mjladson@pm.me>
## Issue Addressed
#3031
## Proposed Changes
Updates the following API endpoints to conform with https://github.com/ethereum/beacon-APIs/pull/190 and https://github.com/ethereum/beacon-APIs/pull/196
- [x] `beacon/states/{state_id}/root`
- [x] `beacon/states/{state_id}/fork`
- [x] `beacon/states/{state_id}/finality_checkpoints`
- [x] `beacon/states/{state_id}/validators`
- [x] `beacon/states/{state_id}/validators/{validator_id}`
- [x] `beacon/states/{state_id}/validator_balances`
- [x] `beacon/states/{state_id}/committees`
- [x] `beacon/states/{state_id}/sync_committees`
- [x] `beacon/headers`
- [x] `beacon/headers/{block_id}`
- [x] `beacon/blocks/{block_id}`
- [x] `beacon/blocks/{block_id}/root`
- [x] `beacon/blocks/{block_id}/attestations`
- [x] `debug/beacon/states/{state_id}`
- [x] `debug/beacon/heads`
- [x] `validator/duties/attester/{epoch}`
- [x] `validator/duties/proposer/{epoch}`
- [x] `validator/duties/sync/{epoch}`
Updates the following Server-Sent Events:
- [x] `events?topics=head`
- [x] `events?topics=block`
- [x] `events?topics=finalized_checkpoint`
- [x] `events?topics=chain_reorg`
## Backwards Incompatible
There is a very minor breaking change with the way the API now handles requests to `beacon/blocks/{block_id}/root` and `beacon/states/{state_id}/root` when `block_id` or `state_id` is the `Root` variant of `BlockId` and `StateId` respectively.
Previously a request to a non-existent root would simply echo the root back to the requester:
```
curl "http://localhost:5052/eth/v1/beacon/states/0xaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/root"
{"data":{"root":"0xaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"}}
```
Now it will return a `404`:
```
curl "http://localhost:5052/eth/v1/beacon/blocks/0xaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/root"
{"code":404,"message":"NOT_FOUND: beacon block with root 0xaaaa…aaaa","stacktraces":[]}
```
In addition to this is the block root `0x0000000000000000000000000000000000000000000000000000000000000000` previously would return the genesis block. It will now return a `404`:
```
curl "http://localhost:5052/eth/v1/beacon/blocks/0x0000000000000000000000000000000000000000000000000000000000000000"
{"code":404,"message":"NOT_FOUND: beacon block with root 0x0000…0000","stacktraces":[]}
```
## Additional Info
- `execution_optimistic` is always set, and will return `false` pre-Bellatrix. I am also open to the idea of doing something like `#[serde(skip_serializing_if = "Option::is_none")]`.
- The value of `execution_optimistic` is set to `false` where possible. Any computation that is reliant on the `head` will simply use the `ExecutionStatus` of the head (unless the head block is pre-Bellatrix).
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/3189.
## Proposed Changes
- Always supply the justified block hash as the `safe_block_hash` when calling `forkchoiceUpdated` on the execution engine.
- Refactor the `get_payload` routine to use the new `ForkchoiceUpdateParameters` struct rather than just the `finalized_block_hash`. I think this is a nice simplification and that the old way of computing the `finalized_block_hash` was unnecessary, but if anyone sees reason to keep that approach LMK.
## Issue Addressed
Resolves#3249
## Proposed Changes
Log merge related parameters and EE status in the beacon notifier before the merge.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
* #3344
## Proposed Changes
There are a number of cases during block processing where we might get an `ExecutionPayloadError` but we shouldn't penalize peers. We were forgetting to enumerate all of the non-penalizing errors in every single match statement where we are making that decision. I created a function to make it explicit when we should and should not penalize peers and I used that function in all places where this logic is needed. This way we won't make the same mistake if we add another variant of `ExecutionPayloadError` in the future.
## Issue Addressed
Resolves#3316
## Proposed Changes
This PR fixes an issue where lighthouse created a transition block with `block.execution_payload().timestamp == terminal_block.timestamp` if the terminal block was created at the slot boundary.
## Issue Addressed
N/A
## Proposed Changes
Make simulator merge compatible. Adds a `--post_merge` flag to the eth1 simulator that enables a ttd and simulates the merge transition. Uses the `MockServer` in the execution layer test utils to simulate a dummy execution node.
Adds the merge transition simulation to CI.
## Issue Addressed
NA
## Proposed Changes
After some discussion in Discord with @mkalinin it was raised that it was not the intention of the engine API to have CLs validate the `latest_valid_hash` (LVH) and all ancestors.
Whilst I believe the engine API is being updated such that the LVH *must* identify a valid hash or be set to some junk value, I'm not confident that we can rely upon the LVH as being valid (at least for now) due to the confusion surrounding it.
Being able to validate blocks via the LVH is a relatively minor optimisation; if the LVH value ends up becoming our head we'll send an fcU and get the VALID status there.
Falsely marking a block as valid has serious consequences and since it's a minor optimisation to use LVH I think that we don't take the risk.
For clarity, we will still *invalidate* the *descendants* of the LVH, we just wont *validate* the *ancestors*.
## Additional Info
NA
## Issue Addressed
Resolves#3176
## Proposed Changes
Continues from PRs by @divagant-martian to gradually remove EL redundancy (see #3284, #3257).
This PR achieves:
- Removes the `broadcast` and `first_success` methods. The functional impact is that every request to the EE will always be tried immediately, regardless of the cached `EngineState` (this resolves#3176). Previously we would check the engine state before issuing requests, this doesn't make sense in a single-EE world; there's only one EE so we might as well try it for every request.
- Runs the upcheck/watchdog routine once per slot rather than thrice. When we had multiple EEs frequent polling was useful to try and detect when the primary EE had come back online and we could switch to it. That's not as relevant now.
- Always creates logs in the `Engines::upcheck` function. Previously we would mute some logs since they could get really noisy when one EE was down but others were functioning fine. Now we only have one EE and are upcheck-ing it less, it makes sense to always produce logs.
This PR purposefully does not achieve:
- Updating all occurances of "engines" to "engine". I'm trying to keep the diff small and manageable. We can come back for this.
## Additional Info
NA
## Overview
This rather extensive PR achieves two primary goals:
1. Uses the finalized/justified checkpoints of fork choice (FC), rather than that of the head state.
2. Refactors fork choice, block production and block processing to `async` functions.
Additionally, it achieves:
- Concurrent forkchoice updates to the EL and cache pruning after a new head is selected.
- Concurrent "block packing" (attestations, etc) and execution payload retrieval during block production.
- Concurrent per-block-processing and execution payload verification during block processing.
- The `Arc`-ification of `SignedBeaconBlock` during block processing (it's never mutated, so why not?):
- I had to do this to deal with sending blocks into spawned tasks.
- Previously we were cloning the beacon block at least 2 times during each block processing, these clones are either removed or turned into cheaper `Arc` clones.
- We were also `Box`-ing and un-`Box`-ing beacon blocks as they moved throughout the networking crate. This is not a big deal, but it's nice to avoid shifting things between the stack and heap.
- Avoids cloning *all the blocks* in *every chain segment* during sync.
- It also has the potential to clean up our code where we need to pass an *owned* block around so we can send it back in the case of an error (I didn't do much of this, my PR is already big enough 😅)
- The `BeaconChain::HeadSafetyStatus` struct was removed. It was an old relic from prior merge specs.
For motivation for this change, see https://github.com/sigp/lighthouse/pull/3244#issuecomment-1160963273
## Changes to `canonical_head` and `fork_choice`
Previously, the `BeaconChain` had two separate fields:
```
canonical_head: RwLock<Snapshot>,
fork_choice: RwLock<BeaconForkChoice>
```
Now, we have grouped these values under a single struct:
```
canonical_head: CanonicalHead {
cached_head: RwLock<Arc<Snapshot>>,
fork_choice: RwLock<BeaconForkChoice>
}
```
Apart from ergonomics, the only *actual* change here is wrapping the canonical head snapshot in an `Arc`. This means that we no longer need to hold the `cached_head` (`canonical_head`, in old terms) lock when we want to pull some values from it. This was done to avoid deadlock risks by preventing functions from acquiring (and holding) the `cached_head` and `fork_choice` locks simultaneously.
## Breaking Changes
### The `state` (root) field in the `finalized_checkpoint` SSE event
Consider the scenario where epoch `n` is just finalized, but `start_slot(n)` is skipped. There are two state roots we might in the `finalized_checkpoint` SSE event:
1. The state root of the finalized block, which is `get_block(finalized_checkpoint.root).state_root`.
4. The state root at slot of `start_slot(n)`, which would be the state from (1), but "skipped forward" through any skip slots.
Previously, Lighthouse would choose (2). However, we can see that when [Teku generates that event](de2b2801c8/data/beaconrestapi/src/main/java/tech/pegasys/teku/beaconrestapi/handlers/v1/events/EventSubscriptionManager.java (L171-L182)) it uses [`getStateRootFromBlockRoot`](de2b2801c8/data/provider/src/main/java/tech/pegasys/teku/api/ChainDataProvider.java (L336-L341)) which uses (1).
I have switched Lighthouse from (2) to (1). I think it's a somewhat arbitrary choice between the two, where (1) is easier to compute and is consistent with Teku.
## Notes for Reviewers
I've renamed `BeaconChain::fork_choice` to `BeaconChain::recompute_head`. Doing this helped ensure I broke all previous uses of fork choice and I also find it more descriptive. It describes an action and can't be confused with trying to get a reference to the `ForkChoice` struct.
I've changed the ordering of SSE events when a block is received. It used to be `[block, finalized, head]` and now it's `[block, head, finalized]`. It was easier this way and I don't think we were making any promises about SSE event ordering so it's not "breaking".
I've made it so fork choice will run when it's first constructed. I did this because I wanted to have a cached version of the last call to `get_head`. Ensuring `get_head` has been run *at least once* means that the cached values doesn't need to wrapped in an `Option`. This was fairly simple, it just involved passing a `slot` to the constructor so it knows *when* it's being run. When loading a fork choice from the store and a slot clock isn't handy I've just used the `slot` that was saved in the `fork_choice_store`. That seems like it would be a faithful representation of the slot when we saved it.
I added the `genesis_time: u64` to the `BeaconChain`. It's small, constant and nice to have around.
Since we're using FC for the fin/just checkpoints, we no longer get the `0x00..00` roots at genesis. You can see I had to remove a work-around in `ef-tests` here: b56be3bc2. I can't find any reason why this would be an issue, if anything I think it'll be better since the genesis-alias has caught us out a few times (0x00..00 isn't actually a real root). Edit: I did find a case where the `network` expected the 0x00..00 alias and patched it here: 3f26ac3e2.
You'll notice a lot of changes in tests. Generally, tests should be functionally equivalent. Here are the things creating the most diff-noise in tests:
- Changing tests to be `tokio::async` tests.
- Adding `.await` to fork choice, block processing and block production functions.
- Refactor of the `canonical_head` "API" provided by the `BeaconChain`. E.g., `chain.canonical_head.cached_head()` instead of `chain.canonical_head.read()`.
- Wrapping `SignedBeaconBlock` in an `Arc`.
- In the `beacon_chain/tests/block_verification`, we can't use the `lazy_static` `CHAIN_SEGMENT` variable anymore since it's generated with an async function. We just generate it in each test, not so efficient but hopefully insignificant.
I had to disable `rayon` concurrent tests in the `fork_choice` tests. This is because the use of `rayon` and `block_on` was causing a panic.
Co-authored-by: Mac L <mjladson@pm.me>
## Issue Addressed
This PR is a subset of the changes in #3134. Unstable will still not function correctly with the new builder spec once this is merged, #3134 should be used on testnets
## Proposed Changes
- Removes redundancy in "builders" (servers implementing the builder spec)
- Renames `payload-builder` flag to `builder`
- Moves from old builder RPC API to new HTTP API, but does not implement the validator registration API (implemented in https://github.com/sigp/lighthouse/pull/3194)
Co-authored-by: sean <seananderson33@gmail.com>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Proposed Changes
Add a new HTTP endpoint `POST /lighthouse/analysis/block_rewards` which takes a vec of `BeaconBlock`s as input and outputs the `BlockReward`s for them.
Augment the `BlockReward` struct with the attestation data for attestations in the block, which simplifies access to this information from blockprint. Using attestation data I've been able to make blockprint up to 95% accurate across Prysm/Lighthouse/Teku/Nimbus. I hope to go even higher using a bunch of synthetic blocks produced for Prysm/Nimbus/Lodestar, which are underrepresented in the current training data.
## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/2944
## Proposed Changes
Remove snapshots from the cache during sync rather than cloning them. This reduces unnecessary cloning and memory fragmentation during sync.
## Additional Info
This PR relies on the fact that the `block_delay` cache is not populated for blocks from sync. Relying on block delay may have the side effect that a change in `block_delay` calculation could lead to: a) more clones, if block delays are added for syncing blocks or b) less clones, if blocks near the head are erroneously provided without a `block_delay`. Case (a) would be a regression to the current status quo, and (b) is low-risk given we know that the snapshot cache is current susceptible to misses (hence `tree-states`).
## Issue Addressed
#2820
## Proposed Changes
The problem is that validator_monitor_prev_epoch metrics are updated only if there is EpochSummary present in summaries map for the previous epoch and it is not the case for the offline validator. Ensure that EpochSummary is inserted into summaries map also for the offline validators.
## Issue Addressed
Fixes an issue that @paulhauner found with the v2.3.0 release candidate whereby the fork choice runs introduced by #3168 tripped over each other during sync:
```
May 24 23:06:40.542 WARN Error signalling fork choice waiter slot: 3884129, error: ForkChoiceSignalOutOfOrder { current: Slot(3884131), latest: Slot(3884129) }, service: beacon
```
This can occur because fork choice is called from the state advance _and_ the per-slot task. When one of these runs takes a long time it can end up finishing after a run from a later slot, tripping the error above. The problem is resolved by not running either of these fork choice calls during sync.
Additionally, these parallel fork choice runs were causing issues in the database:
```
May 24 07:49:05.098 WARN Found a chain that should already have been pruned, head_slot: 92925, head_block_root: 0xa76c7bf1b98e54ed4b0d8686efcfdf853484e6c2a4c67e91cbf19e5ad1f96b17, service: beacon
May 24 07:49:05.101 WARN Database migration failed error: HotColdDBError(FreezeSlotError { current_split_slot: Slot(92608), proposed_split_slot: Slot(92576) }), service: beacon
```
In this case, two fork choice calls triggering the finalization processing were being processed out of order due to differences in their processing time, causing the background migrator to try to advance finalization _backwards_ 😳. Removing the parallel fork choice runs from sync effectively addresses the issue, because these runs are most likely to have different finalized checkpoints (because of the speed at which fork choice advances during sync). In theory it's still possible to process updates out of order if any other fork choice runs end up completing out of order, but this should be much less common. Fixing out of order fork choice runs in general is difficult as it requires architectural changes like serialising fork choice updates through a single thread, or locking fork choice along with the head when it is mutated (https://github.com/sigp/lighthouse/pull/3175).
## Proposed Changes
* Don't run per-slot fork choice during sync (if head is older than 4 slots)
* Don't run state-advance fork choice during sync (if head is older than 4 slots)
* Check for monotonic finalization updates in the background migrator. This is a good defensive check to have, and I'm not sure why we didn't have it before (we may have had it and wrongly removed it).
*This PR was adapted from @pawanjay176's work in #3197.*
## Issue Addressed
Fixes a regression in https://github.com/sigp/lighthouse/pull/3168
## Proposed Changes
https://github.com/sigp/lighthouse/pull/3168 added calls to `fork_choice` in `BeaconChain::per_slot_task` function. This leads to a panic as `per_slot_task` is called from an async context which calls fork choice, which then calls `block_on`.
This PR changes the timer to call the `per_slot_task` function in a blocking thread.
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
## Issue Addressed
This fixes the low-hanging Clippy lints introduced in Rust 1.61 (due any hour now). It _ignores_ one lint, because fixing it requires a structural refactor of the validator client that needs to be done delicately. I've started on that refactor and will create another PR that can be reviewed in more depth in the coming days. I think we should merge this PR in the meantime to unblock CI.
## Issue Addressed
Upcoming spec change https://github.com/ethereum/consensus-specs/pull/2878
## Proposed Changes
1. Run fork choice at the start of every slot, and wait for this run to complete before proposing a block.
2. As an optimisation, also run fork choice 3/4 of the way through the slot (at 9s), _dequeueing attestations for the next slot_.
3. Remove the fork choice run from the state advance timer that occurred before advancing the state.
## Additional Info
### Block Proposal Accuracy
This change makes us more likely to propose on top of the correct head in the presence of re-orgs with proposer boost in play. The main scenario that this change is designed to address is described in the linked spec issue.
### Attestation Accuracy
This change _also_ makes us more likely to attest to the correct head. Currently in the case of a skipped slot at `slot` we only run fork choice 9s into `slot - 1`. This means the attestations from `slot - 1` aren't taken into consideration, and any boost applied to the block from `slot - 1` is not removed (it should be). In the language of the linked spec issue, this means we are liable to attest to C, even when the majority voting weight has already caused a re-org to B.
### Why remove the call before the state advance?
If we've run fork choice at the start of the slot then it has already dequeued all the attestations from the previous slot, which are the only ones eligible to influence the head in the current slot. Running fork choice again is unnecessary (unless we run it for the next slot and try to pre-empt a re-org, but I don't currently think this is a great idea).
### Performance
Based on Prater testing this adds about 5-25ms of runtime to block proposal times, which are 500-1000ms on average (and spike to 5s+ sometimes due to state handling issues 😢 ). I believe this is a small enough penalty to enable it by default, with the option to disable it via the new flag `--fork-choice-before-proposal-timeout 0`. Upcoming work on block packing and state representation will also reduce block production times in general, while removing the spikes.
### Implementation
Fork choice gets invoked at the start of the slot via the `per_slot_task` function called from the slot timer. It then uses a condition variable to signal to block production that fork choice has been updated. This is a bit funky, but it seems to work. One downside of the timer-based approach is that it doesn't happen automatically in most of the tests. The test added by this PR has to trigger the run manually.
## Proposed Changes
Remove support for DB migrations that support upgrading from schema's below version 5. This is mostly for cosmetic/code quality reasons as in most circumstances upgrading from versions of Lighthouse this old will almost always require a re-sync.
## Additional Info
The minimum supported database schema is now version 5.
## Issue Addressed
N/A
## Proposed Changes
Prevents the early attester cache from producing attestations to future blocks. This bug could result in a missed head vote if the BN was requested to produce an attestation for an earlier slot than the head block during the (usually) short window of time between verifying a block and setting it as the head.
This bug was noticed in an [Antithesis](https://andreagrieser.com/) test and diagnosed by @realbigsean.
## Additional Info
NA
# Description
Since the `TaskExecutor` currently requires a `Weak<Runtime>`, it's impossible to use it in an async test where the `Runtime` is created outside our scope. Whilst we *could* create a new `Runtime` instance inside the async test, dropping that `Runtime` would cause a panic (you can't drop a `Runtime` in an async context).
To address this issue, this PR creates the `enum Handle`, which supports either:
- A `Weak<Runtime>` (for use in our production code)
- A `Handle` to a runtime (for use in testing)
In theory, there should be no change to the behaviour of our production code (beyond some slightly different descriptions in HTTP 500 errors), or even our tests. If there is no change, you might ask *"why bother?"*. There are two PRs (#3070 and #3175) that are waiting on these fixes to introduce some new tests. Since we've added the EL to the `BeaconChain` (for the merge), we are now doing more async stuff in tests.
I've also added a `RuntimeExecutor` to the `BeaconChainTestHarness`. Whilst that's not immediately useful, it will become useful in the near future with all the new async testing.
## Proposed Changes
Reduce post-merge disk usage by not storing finalized execution payloads in Lighthouse's database.
⚠️ **This is achieved in a backwards-incompatible way for networks that have already merged** ⚠️. Kiln users and shadow fork enjoyers will be unable to downgrade after running the code from this PR. The upgrade migration may take several minutes to run, and can't be aborted after it begins.
The main changes are:
- New column in the database called `ExecPayload`, keyed by beacon block root.
- The `BeaconBlock` column now stores blinded blocks only.
- Lots of places that previously used full blocks now use blinded blocks, e.g. analytics APIs, block replay in the DB, etc.
- On finalization:
- `prune_abanonded_forks` deletes non-canonical payloads whilst deleting non-canonical blocks.
- `migrate_db` deletes finalized canonical payloads whilst deleting finalized states.
- Conversions between blinded and full blocks are implemented in a compositional way, duplicating some work from Sean's PR #3134.
- The execution layer has a new `get_payload_by_block_hash` method that reconstructs a payload using the EE's `eth_getBlockByHash` call.
- I've tested manually that it works on Kiln, using Geth and Nethermind.
- This isn't necessarily the most efficient method, and new engine APIs are being discussed to improve this: https://github.com/ethereum/execution-apis/pull/146.
- We're depending on the `ethers` master branch, due to lots of recent changes. We're also using a workaround for https://github.com/gakonst/ethers-rs/issues/1134.
- Payload reconstruction is used in the HTTP API via `BeaconChain::get_block`, which is now `async`. Due to the `async` fn, the `blocking_json` wrapper has been removed.
- Payload reconstruction is used in network RPC to serve blocks-by-{root,range} responses. Here the `async` adjustment is messier, although I think I've managed to come up with a reasonable compromise: the handlers take the `SendOnDrop` by value so that they can drop it on _task completion_ (after the `fn` returns). Still, this is introducing disk reads onto core executor threads, which may have a negative performance impact (thoughts appreciated).
## Additional Info
- [x] For performance it would be great to remove the cloning of full blocks when converting them to blinded blocks to write to disk. I'm going to experiment with a `put_block` API that takes the block by value, breaks it into a blinded block and a payload, stores the blinded block, and then re-assembles the full block for the caller.
- [x] We should measure the latency of blocks-by-root and blocks-by-range responses.
- [x] We should add integration tests that stress the payload reconstruction (basic tests done, issue for more extensive tests: https://github.com/sigp/lighthouse/issues/3159)
- [x] We should (manually) test the schema v9 migration from several prior versions, particularly as blocks have changed on disk and some migrations rely on being able to load blocks.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
Fix a panic due to misuse of the Tokio executor when processing a forkchoiceUpdated response. We were previously calling `process_invalid_execution_payload` from the async function `update_execution_engine_forkchoice_async`, which resulted in a panic because `process_invalid_execution_payload` contains a call to fork choice, which ultimately calls `block_on`.
An example backtrace can be found here: https://gist.github.com/michaelsproul/ac5da03e203d6ffac672423eaf52fb20
## Proposed Changes
Wrap the call to `process_invalid_execution_payload` in a `spawn_blocking` so that `block_on` is no longer called from an async context.
## Additional Info
- I've been thinking about how to catch bugs like this with static analysis (a new Clippy lint).
- The payload validation tests have been re-worked to support distinct responses from the mock EE for newPayload and forkchoiceUpdated. Three new tests have been added covering the `Invalid`, `InvalidBlockHash` and `InvalidTerminalBlock` cases.
- I think we need a bunch more tests of different legal and illegal variations
## Issue Addressed
NA
## Proposed Changes
Disallow the production of attestations and retrieval of unaggregated attestations when they reference an optimistic head. Add tests to this end.
I also moved `BeaconChain::produce_unaggregated_attestation_for_block` to the `BeaconChainHarness`. It was only being used during tests, so it's nice to stop pretending it's production code. I also needed something that could produce attestations to optimistic blocks in order to simulate scenarios where the justified checkpoint is determined invalid (if no one would attest to an optimistic block, we could never justify it and then flip it to invalid).
## Additional Info
- ~~Blocked on #3126~~
## Issue Addressed
NA
## Proposed Changes
Fixes an issue introduced in #3088 which was causing unnecessary `crit` logs on networks without Bellatrix enabled.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Ensures that a `VALID` response from a `forkchoiceUpdate` call will update that block in `ProtoArray`.
I also had to modify the mock execution engine so it wouldn't return valid when all payloads were supposed to be some other static value.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
- Adds more checks to prevent importing blocks atop parent with invalid execution payloads.
- Adds a test for these conditions.
## Additional Info
NA
## Proposed Changes
Cut release v2.2.0 including proposer boost.
## Additional Info
I also updated the clippy lints for the imminent release of Rust 1.60, although LH v2.2.0 will continue to compile using Rust 1.58 (our MSRV).
## Proposed Changes
I did some gardening 🌳 in our dependency tree:
- Remove duplicate versions of `warp` (git vs patch)
- Remove duplicate versions of lots of small deps: `cpufeatures`, `ethabi`, `ethereum-types`, `bitvec`, `nix`, `libsecp256k1`.
- Update MDBX (should resolve#3028). I tested and Lighthouse compiles on Windows 11 now.
- Restore `psutil` back to upstream
- Make some progress updating everything to rand 0.8. There are a few crates stuck on 0.7.
Hopefully this puts us on a better footing for future `cargo audit` issues, and improves compile times slightly.
## Additional Info
Some crates are held back by issues with `zeroize`. libp2p-noise depends on [`chacha20poly1305`](https://crates.io/crates/chacha20poly1305) which depends on zeroize < v1.5, and we can only have one version of zeroize because it's post 1.0 (see https://github.com/rust-lang/cargo/issues/6584). The latest version of `zeroize` is v1.5.4, which is used by the new versions of many other crates (e.g. `num-bigint-dig`). Once a new version of chacha20poly1305 is released we can update libp2p-noise and upgrade everything to the latest `zeroize` version.
I've also opened a PR to `blst` related to zeroize: https://github.com/supranational/blst/pull/111
## Proposed Changes
Add a `lighthouse db` command with three initial subcommands:
- `lighthouse db version`: print the database schema version.
- `lighthouse db migrate --to N`: manually upgrade (or downgrade!) the database to a different version.
- `lighthouse db inspect --column C`: log the key and size in bytes of every value in a given `DBColumn`.
This PR lays the groundwork for other changes, namely:
- Mark's fast-deposit sync (https://github.com/sigp/lighthouse/pull/2915), for which I think we should implement a database downgrade (from v9 to v8).
- My `tree-states` work, which already implements a downgrade (v10 to v8).
- Standalone purge commands like `lighthouse db purge-dht` per https://github.com/sigp/lighthouse/issues/2824.
## Additional Info
I updated the `strum` crate to 0.24.0, which necessitated some changes in the network code to remove calls to deprecated methods.
Thanks to @winksaville for the motivation, and implementation work that I used as a source of inspiration (https://github.com/sigp/lighthouse/pull/2685).
## Issue Addressed
MEV boost compatibility
## Proposed Changes
See #2987
## Additional Info
This is blocked on the stabilization of a couple specs, [here](https://github.com/ethereum/beacon-APIs/pull/194) and [here](https://github.com/flashbots/mev-boost/pull/20).
Additional TODO's and outstanding questions
- [ ] MEV boost JWT Auth
- [ ] Will `builder_proposeBlindedBlock` return the revealed payload for the BN to propogate
- [ ] Should we remove `private-tx-proposals` flag and communicate BN <> VC with blinded blocks by default once these endpoints enter the beacon-API's repo? This simplifies merge transition logic.
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Proposed Changes
Allow Lighthouse to speculatively create blocks via the `/eth/v1/validators/blocks` endpoint by optionally skipping the RANDAO verification that we introduced in #2740. When `verify_randao=false` is passed as a query parameter the `randao_reveal` is not required to be present, and if present will only be lightly checked (must be a valid BLS sig). If `verify_randao` is omitted it defaults to true and Lighthouse behaves exactly as it did previously, hence this PR is backwards-compatible.
I'd like to get this change into `unstable` pretty soon as I've got 3 projects building on top of it:
- [`blockdreamer`](https://github.com/michaelsproul/blockdreamer), which mocks block production every slot in order to fingerprint clients
- analysis of Lighthouse's block packing _optimality_, which uses `blockdreamer` to extract interesting instances of the attestation packing problem
- analysis of Lighthouse's block packing _performance_ (as in speed) on the `tree-states` branch
## Additional Info
Having tested `blockdreamer` with Prysm, Nimbus and Teku I noticed that none of them verify the randao signature on `/eth/v1/validator/blocks`. I plan to open a PR to the `beacon-APIs` repo anyway so that this parameter can be standardised in case the other clients add RANDAO verification by default in future.
## Issue Addressed
No issue, just updating merge ASCII art.
## Proposed Changes
Updating ASCII art for merge.
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
## Issue Addressed
This address an issue which was preventing checkpoint-sync.
When the node starts from checkpoint sync, the head block and the finalized block are the same value. We did not respect this when sending a `forkchoiceUpdated` (fcU) call to the EL and were expecting fork choice to hold the *finalized ancestor of the head* and returning an error when it didn't.
This PR uses *only fork choice* for sending fcU updates. This is actually quite nice and avoids some atomicity issues between `chain.canonical_head` and `chain.fork_choice`. Now, whenever `chain.fork_choice.get_head` returns a value we also cache the values required for the next fcU call.
## TODO
- [x] ~~Blocked on #3043~~
- [x] Ensure there isn't a warn message at startup.
## Issue Addressed
Resolves#2936
## Proposed Changes
Adds functionality for calling [`validator/prepare_beacon_proposer`](https://ethereum.github.io/beacon-APIs/?urls.primaryName=dev#/Validator/prepareBeaconProposer) in advance.
There is a `BeaconChain::prepare_beacon_proposer` method which, which called, computes the proposer for the next slot. If that proposer has been registered via the `validator/prepare_beacon_proposer` API method, then the `beacon_chain.execution_layer` will be provided the `PayloadAttributes` for us in all future forkchoiceUpdated calls. An artificial forkchoiceUpdated call will be created 4s before each slot, when the head updates and when a validator updates their information.
Additionally, I added strict ordering for calls from the `BeaconChain` to the `ExecutionLayer`. I'm not certain the `ExecutionLayer` will always maintain this ordering, but it's a good start to have consistency from the `BeaconChain`. There are some deadlock opportunities introduced, they are documented in the code.
## Additional Info
- ~~Blocked on #2837~~
Co-authored-by: realbigsean <seananderson33@GMAIL.com>
## Issue Addressed
Resolves#3015
## Proposed Changes
Add JWT token based authentication to engine api requests. The jwt secret key is read from the provided file and is used to sign tokens that are used for authenticated communication with the EL node.
- [x] Interop with geth (synced `merge-devnet-4` with the `merge-kiln-v2` branch on geth)
- [x] Interop with other EL clients (nethermind on `merge-devnet-4`)
- [x] ~Implement `zeroize` for jwt secrets~
- [x] Add auth server tests with `mock_execution_layer`
- [x] Get auth working with the `execution_engine_integration` tests
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
Addresses spec changes from v1.1.0:
- https://github.com/ethereum/consensus-specs/pull/2830
- https://github.com/ethereum/consensus-specs/pull/2846
## Proposed Changes
* Downgrade the REJECT for `HeadBlockFinalized` to an IGNORE. This applies to both unaggregated and aggregated attestations.
## Additional Info
I thought about also changing the penalty for `UnknownTargetRoot` but I don't think it's reachable in practice.
## Issue Addressed
As discussed on last-night's consensus call, the testnets next week will target the [Kiln Spec v2](https://hackmd.io/@n0ble/kiln-spec).
Presently, we support Kiln V1. V2 is backwards compatible, except for renaming `random` to `prev_randao` in:
- https://github.com/ethereum/execution-apis/pull/180
- https://github.com/ethereum/consensus-specs/pull/2835
With this PR we'll no longer be compatible with the existing Kintsugi and Kiln testnets, however we'll be ready for the testnets next week. I raised this breaking change in the call last night, we are all keen to move forward and break things.
We now target the [`merge-kiln-v2`](https://github.com/MariusVanDerWijden/go-ethereum/tree/merge-kiln-v2) branch for interop with Geth. This required adding the `--http.aauthport` to the tester to avoid a port conflict at startup.
### Changes to exec integration tests
There's some change in the `merge-kiln-v2` version of Geth that means it can't compile on a vanilla Github runner. Bumping the `go` version on the runner solved this issue.
Whilst addressing this, I refactored the `testing/execution_integration` crate to be a *binary* rather than a *library* with tests. This means that we don't need to run the `build.rs` and build Geth whenever someone runs `make lint` or `make test-release`. This is nice for everyday users, but it's also nice for CI so that we can have a specific runner for these tests and we don't need to ensure *all* runners support everything required to build all execution clients.
## More Info
- [x] ~~EF tests are failing since the rename has broken some tests that reference the old field name. I have been told there will be new tests released in the coming days (25/02/22 or 26/02/22).~~
## Description
This PR adds a single, trivial commit (f5d2b27d78349d5a675a2615eba42cc9ae708094) atop #2986 to resolve a tests compile error. The original author (@ethDreamer) is AFK so I'm getting this one merged ☺️
Please see #2986 for more information about the other, significant changes in this PR.
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
Co-authored-by: ethDreamer <37123614+ethDreamer@users.noreply.github.com>
## Issue Addressed
NA
## Proposed Changes
Adds the functionality to allow blocks to be validated/invalidated after their import as per the [optimistic sync spec](https://github.com/ethereum/consensus-specs/blob/dev/sync/optimistic.md#how-to-optimistically-import-blocks). This means:
- Updating `ProtoArray` to allow flipping the `execution_status` of ancestors/descendants based on payload validity updates.
- Creating separation between `execution_layer` and the `beacon_chain` by creating a `PayloadStatus` struct.
- Refactoring how the `execution_layer` selects a `PayloadStatus` from the multiple statuses returned from multiple EEs.
- Adding testing framework for optimistic imports.
- Add `ExecutionBlockHash(Hash256)` new-type struct to avoid confusion between *beacon block roots* and *execution payload hashes*.
- Add `merge` to [`FORKS`](c3a793fd73/Makefile (L17)) in the `Makefile` to ensure we test the beacon chain with merge settings.
- Fix some tests here that were failing due to a missing execution layer.
## TODO
- [ ] Balance tests
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
## Proposed Changes
Lots of lint updates related to `flat_map`, `unwrap_or_else` and string patterns. I did a little more creative refactoring in the op pool, but otherwise followed Clippy's suggestions.
## Additional Info
We need this PR to unblock CI.
## Issue Addressed
NA
## Proposed Changes
This PR extends #3018 to address my review comments there and add automated integration tests with Geth (and other implementations, in the future).
I've also de-duplicated the "unused port" logic by creating an `common/unused_port` crate.
## Additional Info
I'm not sure if we want to merge this PR, or update #3018 and merge that. I don't mind, I'm primarily opening this PR to make sure CI works.
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
## Issue Addressed
Closes#3014
## Proposed Changes
- Rename `receipt_root` to `receipts_root`
- Rename `execute_payload` to `notify_new_payload`
- This is slightly weird since we modify everything except the actual HTTP call to the engine API. That change is expected to be implemented in #2985 (cc @ethDreamer)
- Enable "random" tests for Bellatrix.
## Notes
This will break *partially* compatibility with Kintusgi testnets in order to gain compatibility with [Kiln](https://hackmd.io/@n0ble/kiln-spec) testnets. I think it will only break the BN APIs due to the `receipts_root` change, however it might have some other effects too.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
#2883
## Proposed Changes
* Added `suggested-fee-recipient` & `suggested-fee-recipient-file` flags to validator client (similar to graffiti / graffiti-file implementation).
* Added proposer preparation service to VC, which sends the fee-recipient of all known validators to the BN via [/eth/v1/validator/prepare_beacon_proposer](https://github.com/ethereum/beacon-APIs/pull/178) api once per slot
* Added [/eth/v1/validator/prepare_beacon_proposer](https://github.com/ethereum/beacon-APIs/pull/178) api endpoint and preparation data caching
* Added cleanup routine to remove cached proposer preparations when not updated for 2 epochs
## Additional Info
Changed the Implementation following the discussion in #2883.
Co-authored-by: pk910 <philipp@pk910.de>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Co-authored-by: Philipp K <philipp@pk910.de>
## Issue Addressed
This PR fixes the unnecessary `WARN Single block lookup failed` messages described here:
https://github.com/sigp/lighthouse/pull/2866#issuecomment-1008442640
## Proposed Changes
Add a new cache to the `BeaconChain` that tracks the block roots of blocks from before finalization. These could be blocks from the canonical chain (which might need to be read from disk), or old pre-finalization blocks that have been forked out.
The cache also stores a set of block roots for in-progress single block lookups, which duplicates some of the information from sync's `single_block_lookups` hashmap:
a836e180f9/beacon_node/network/src/sync/manager.rs (L192-L196)
On a live node you can confirm that the cache is working by grepping logs for the message: `Rejected attestation to finalized block`.
#2923
Which issue # does this PR address?
There's a redundant field on the BeaconChain called disabled_forks that was once part of our fork-aware networking (#953) but which is no longer used and could be deleted. so Removed all references to disabled_forks so that the code compiles and git grep disabled_forks returns no results.
## Proposed Changes
Please list or describe the changes introduced by this PR.
Removed all references of disabled_forks
Co-authored-by: Divma <26765164+divagant-martian@users.noreply.github.com>
## Proposed Changes
Change the canonical fork name for the merge to Bellatrix. Keep other merge naming the same to avoid churn.
I've also fixed and enabled the `fork` and `transition` tests for Bellatrix, and the v1.1.7 fork choice tests.
Additionally, the `BellatrixPreset` has been added with tests. It gets served via the `/config/spec` API endpoint along with the other presets.
## Issue Addressed
NA
## Proposed Changes
In https://github.com/sigp/lighthouse/pull/2832 we made some changes to the `SnapshotCache` to help deal with the one-block reorgs seen on mainnet (and testnets).
I believe the change in #2832 is good and we should keep it, but I think that in its present form it is causing the `SnapshotCache` to hold onto states that it doesn't need anymore. For example, a skip slot will result in one more `BeaconSnapshot` being stored in the cache.
This PR adds a new type of pruning that happens after a block is inserted to the cache. We will remove any snapshot from the cache that is a *grandparent* of the block being imported. Since we know the grandparent has two valid blocks built atop it, it is not at risk from a one-block re-org.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
We have observed occasions were under-resourced nodes will receive messages that were valid *at the time*, but later become invalidated due to long waits for a `BeaconProcessor` worker.
In this PR, we will check to see if the message was valid *at the time of receipt*. If it was initially valid but invalid now, we just ignore the message without penalizing the peer.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Introduces a cache to attestation to produce atop blocks which will become the head, but are not fully imported (e.g., not inserted into the database).
Whilst attesting to a block before it's imported is rather easy, if we're going to produce that attestation then we also need to be able to:
1. Verify that attestation.
1. Respond to RPC requests for the `beacon_block_root`.
Attestation verification (1) is *partially* covered. Since we prime the shuffling cache before we insert the block into the early attester cache, we should be fine for all typical use-cases. However, it is possible that the cache is washed out before we've managed to insert the state into the database and then attestation verification will fail with a "missing beacon state"-type error.
Providing the block via RPC (2) is also partially covered, since we'll check the database *and* the early attester cache when responding a blocks-by-root request. However, we'll still omit the block from blocks-by-range requests (until the block lands in the DB). I *think* this is fine, since there's no guarantee that we return all blocks for those responses.
Another important consideration is whether or not the *parent* of the early attester block is available in the databse. If it were not, we might fail to respond to blocks-by-root request that are iterating backwards to collect a chain of blocks. I argue that *we will always have the parent of the early attester block in the database.* This is because we are holding the fork-choice write-lock when inserting the block into the early attester cache and we do not drop that until the block is in the database.
## Issue Addressed
NA
## Proposed Changes
Ensures full roots are printed, rather than shortened versions like `0x935b…d376`.
For example, it would be nice if we could do API queries based upon the roots shown in the `Beacon chain re-org` event:
```
Jan 05 12:36:52.224 WARN Beacon chain re-org reorg_distance: 2, new_slot: 2073184, new_head: 0x8a97…2dec, new_head_parent: 0xa985…7688, previous_slot: 2073183, previous_head: 0x935b…d376, service: beacon
Jan 05 13:35:05.832 WARN Beacon chain re-org reorg_distance: 1, new_slot: 2073475, new_head: 0x9207…c6b9, new_head_parent: 0xb2ce…839b, previous_slot: 2073474, previous_head: 0x8066…92f7, service: beacon
```
## Additional Info
We should eventually fix this project-wide, however this is a short-term patch.
## Proposed Changes
Update `superstruct` to bring in @realbigsean's fixes necessary for MEV-compatible private beacon block types (a la #2795).
The refactoring is due to another change in superstruct that allows partial getters to be auto-generated.
## Issue Addressed
N/A
## Proposed Changes
We are currently treating errors from the EL on `engine_executePayload` as `PayloadVerificationStatus::NotVerified`. This adds the block as a candidate head block in fork choice even if the EL explicitly rejected the block as invalid.
`PayloadVerificationStatus::NotVerified` should be only returned when the EL explicitly returns "syncing" imo. This PR propagates an error instead of returning `NotVerified` on EL all EL errors.
## Issue Addressed
Closes#2286Closes#2538Closes#2342
## Proposed Changes
Part II of major slasher optimisations after #2767
These changes will be backwards-incompatible due to the move to MDBX (and the schema change) 😱
* [x] Shrink attester keys from 16 bytes to 7 bytes.
* [x] Shrink attester records from 64 bytes to 6 bytes.
* [x] Separate `DiskConfig` from regular `Config`.
* [x] Add configuration for the LRU cache size.
* [x] Add a "migration" that deletes any legacy LMDB database.
## Issue Addressed
Successor to #2431
## Proposed Changes
* Add a `BlockReplayer` struct to abstract over the intricacies of calling `per_slot_processing` and `per_block_processing` while avoiding unnecessary tree hashing.
* Add a variant of the forwards state root iterator that does not require an `end_state`.
* Use the `BlockReplayer` when reconstructing states in the database. Use the efficient forwards iterator for frozen states.
* Refactor the iterators to remove `Arc<HotColdDB>` (this seems to be neater than making _everything_ an `Arc<HotColdDB>` as I did in #2431).
Supplying the state roots allow us to avoid building a tree hash cache at all when reconstructing historic states, which saves around 1 second flat (regardless of `slots-per-restore-point`). This is a small percentage of worst-case state load times with 200K validators and SPRP=2048 (~15s vs ~16s) but a significant speed-up for more frequent restore points: state loads with SPRP=32 should be now consistently <500ms instead of 1.5s (a ~3x speedup).
## Additional Info
Required by https://github.com/sigp/lighthouse/pull/2628
## Proposed Changes
Remove the `is_first_block_in_epoch` logic from the balances cache update logic, as it was incorrect in the case of skipped slots. The updated code is simpler because regardless of whether the block is the first in the epoch we can check if an entry for the epoch boundary root already exists in the cache, and update the cache accordingly.
Additionally, to assist with flip-flopping justified epochs, move to cloning the balance cache rather than moving it. This should still be very fast in practice because the balances cache is a ~1.6MB `Vec`, and this operation is expected to only occur infrequently.
## Issue Addressed
Resolves: https://github.com/sigp/lighthouse/issues/2741
Includes: https://github.com/sigp/lighthouse/pull/2853 so that we can get ssz static tests passing here on v1.1.6. If we want to merge that first, we can make this diff slightly smaller
## Proposed Changes
- Changes the `justified_epoch` and `finalized_epoch` in the `ProtoArrayNode` each to an `Option<Checkpoint>`. The `Option` is necessary only for the migration, so not ideal. But does allow us to add a default logic to `None` on these fields during the database migration.
- Adds a database migration from a legacy fork choice struct to the new one, search for all necessary block roots in fork choice by iterating through blocks in the db.
- updates related to https://github.com/ethereum/consensus-specs/pull/2727
- We will have to update the persisted forkchoice to make sure the justified checkpoint stored is correct according to the updated fork choice logic. This boils down to setting the forkchoice store's justified checkpoint to the justified checkpoint of the block that advanced the finalized checkpoint to the current one.
- AFAICT there's no migration steps necessary for the update to allow applying attestations from prior blocks, but would appreciate confirmation on that
- I updated the consensus spec tests to v1.1.6 here, but they will fail until we also implement the proposer score boost updates. I confirmed that the previously failing scenario `new_finalized_slot_is_justified_checkpoint_ancestor` will now pass after the boost updates, but haven't confirmed _all_ tests will pass because I just quickly stubbed out the proposer boost test scenario formatting.
- This PR now also includes proposer boosting https://github.com/ethereum/consensus-specs/pull/2730
## Additional Info
I realized checking justified and finalized roots in fork choice makes it more likely that we trigger this bug: https://github.com/ethereum/consensus-specs/pull/2727
It's possible the combination of justified checkpoint and finalized checkpoint in the forkchoice store is different from in any block in fork choice. So when trying to startup our store's justified checkpoint seems invalid to the rest of fork choice (but it should be valid). When this happens we get an `InvalidBestNode` error and fail to start up. So I'm including that bugfix in this branch.
Todo:
- [x] Fix fork choice tests
- [x] Self review
- [x] Add fix for https://github.com/ethereum/consensus-specs/pull/2727
- [x] Rebase onto Kintusgi
- [x] Fix `num_active_validators` calculation as @michaelsproul pointed out
- [x] Clean up db migrations
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
N/A
## Proposed Changes
Changes required for the `merge-devnet-3`. Added some more non substantive renames on top of @realbigsean 's commit.
Note: this doesn't include the proposer boosting changes in kintsugi v3.
This devnet isn't running with the proposer boosting fork choice changes so if we are looking to merge https://github.com/sigp/lighthouse/pull/2822 into `unstable`, then I think we should just maintain this branch for the devnet temporarily.
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Proposed Changes
In the event of a late block, keep the block in the snapshot cache by cloning it. This helps us process new blocks quickly in the event the late block was re-org'd.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
We were calculating justified balances incorrectly on cache misses in `set_justified_checkpoint`
## Proposed Changes
Use the `get_effective_balances` method as opposed to `state.balances`, which returns exact balances
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
New rust lints
## Proposed Changes
- Boxing some enum variants
- removing some unused fields (is the validator lockfile unused? seemed so to me)
## Additional Info
- some error fields were marked as dead code but are logged out in areas
- left some dead fields in our ef test code because I assume they are useful for debugging?
Co-authored-by: realbigsean <seananderson33@gmail.com>
Fix max packet sizes
Fix max_payload_size function
Add merge block test
Fix max size calculation; fix up test
Clear comments
Add a payload_size_function
Use safe arith for payload calculation
Return an error if block too big in block production
Separate test to check if block is over limit
* Fix fork choice after rebase
* Remove paulhauner warp dep
* Fix fork choice test compile errors
* Assume fork choice payloads are valid
* Add comment
* Ignore new tests
* Fix error in test skipping
* Fix arbitrary check kintsugi
* Add merge chain spec fields, and a function to determine which constant to use based on the state variant
* increment spec test version
* Remove `Transaction` enum wrapper
* Remove Transaction new-type
* Remove gas validations
* Add `--terminal-block-hash-epoch-override` flag
* Increment spec tests version to 1.1.5
* Remove extraneous gossip verification https://github.com/ethereum/consensus-specs/pull/2687
* - Remove unused Error variants
- Require both "terminal-block-hash-epoch-override" and "terminal-block-hash-override" when either flag is used
* - Remove a couple more unused Error variants
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* update initializing from eth1 for merge genesis
* read execution payload header from file lcli
* add `create-payload-header` command to `lcli`
* fix base fee parsing
* Apply suggestions from code review
* default `execution_payload_header` bool to false when deserializing `meta.yml` in EF tests
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Add payload verification status to fork choice
* Pass payload verification status to import_block
* Add valid back-propagation
* Add head safety status latch to API
* Remove ExecutionLayerStatus
* Add execution info to client notifier
* Update notifier logs
* Change use of "hash" to refer to beacon block
* Shutdown on invalid finalized block
* Tidy, add comments
* Fix failing FC tests
* Allow blocks with unsafe head
* Fix forkchoiceUpdate call on startup
* Ignore payload errors
* Only return payload handle on valid response
* Push some engine logs down to debug
* Push ee fork choice log to debug
* Push engine call failure to debug
* Push some more errors to debug
* Fix panic at startup
* Reject some HTTP endpoints when EL is not ready
* Restrict more endpoints
* Add watchdog task
* Change scheduling
* Update to new schedule
* Add "syncing" concept
* Remove RequireSynced
* Add is_merge_complete to head_info
* Cache latest_head in Engines
* Call consensus_forkchoiceUpdate on startup
* Thread eth1_block_hash into interop genesis state
* Add merge-fork-epoch flag
* Build LH with minimal spec by default
* Add verbose logs to execution_layer
* Add --http-allow-sync-stalled flag
* Update lcli new-testnet to create genesis state
* Fix http test
* Fix compile errors in tests
* Start adding merge tests
* Expose MockExecutionLayer
* Add mock_execution_layer to BeaconChainHarness
* Progress with merge test
* Return more detailed errors with gas limit issues
* Use a better gas limit in block gen
* Ensure TTD is met in block gen
* Fix basic_merge tests
* Start geth testing
* Fix conflicts after rebase
* Remove geth tests
* Improve merge test
* Address clippy lints
* Make pow block gen a pure function
* Add working new test, breaking existing test
* Fix test names
* Add should_panic
* Don't run merge tests in debug
* Detect a tokio runtime when starting MockServer
* Fix clippy lint, include merge tests
* - Update the fork choice `ProtoNode` to include `is_merge_complete`
- Add database migration for the persisted fork choice
* update tests
* Small cleanup
* lints
* store execution block hash in fork choice rather than bool
Added Execution Payload from Rayonism Fork
Updated new Containers to match Merge Spec
Updated BeaconBlockBody for Merge Spec
Completed updating BeaconState and BeaconBlockBody
Modified ExecutionPayload<T> to use Transaction<T>
Mostly Finished Changes for beacon-chain.md
Added some things for fork-choice.md
Update to match new fork-choice.md/fork.md changes
ran cargo fmt
Added Missing Pieces in eth2_libp2p for Merge
fix ef test
Various Changes to Conform Closer to Merge Spec
## Issue Addressed
Closes#1996
## Proposed Changes
Run a second `Logger` via `sloggers` which logs to a file in the background with:
- separate `debug-level` for background and terminal logging
- the ability to limit log size
- rotation through a customizable number of log files
- an option to compress old log files (`.gz` format)
Add the following new CLI flags:
- `--logfile-debug-level`: The debug level of the log files
- `--logfile-max-size`: The maximum size of each log file
- `--logfile-max-number`: The number of old log files to store
- `--logfile-compress`: Whether to compress old log files
By default background logging uses the `debug` log level and saves logfiles to:
- Beacon Node: `$HOME/.lighthouse/$network/beacon/logs/beacon.log`
- Validator Client: `$HOME/.lighthouse/$network/validators/logs/validator.log`
Or, when using the `--datadir` flag:
`$datadir/beacon/logs/beacon.log` and `$datadir/validators/logs/validator.log`
Once rotated, old logs are stored like so: `beacon.log.1`, `beacon.log.2` etc.
> Note: `beacon.log.1` is always newer than `beacon.log.2`.
## Additional Info
Currently the default value of `--logfile-max-size` is 200 (MB) and `--logfile-max-number` is 5.
This means that the maximum storage space that the logs will take up by default is 1.2GB.
(200MB x 5 from old log files + <200MB the current logfile being written to)
Happy to adjust these default values to whatever people think is appropriate.
It's also worth noting that when logging to a file, we lose our custom `slog` formatting. This means the logfile logs look like this:
```
Oct 27 16:02:50.305 INFO Lighthouse started, version: Lighthouse/v2.0.1-8edd9d4+, module: lighthouse:413
Oct 27 16:02:50.305 INFO Configured for network, name: prater, module: lighthouse:414
```
