## Issue Addressed
Closes#3514
## Proposed Changes
- Change default monitoring endpoint frequency to 120 seconds to fit with 30k requests/month limit.
- Allow configuration of the monitoring endpoint frequency using `--monitoring-endpoint-frequency N` where `N` is a value in seconds.
## Issue Addressed
[Have --checkpoint-sync-url timeout](https://github.com/sigp/lighthouse/issues/3478)
## Proposed Changes
I added a parameter for `get_bytes_opt_accept_header<U: IntoUrl>` which accept a timeout duration, and modified the body of `get_beacon_blocks_ssz` and `get_debug_beacon_states_ssz` to pass corresponding timeout durations.
## Issue Addressed
We currently subscribe to attestation subnets as soon as the subscription arrives (one epoch in advance), this makes it so that subscriptions for future slots are scheduled instead of done immediately.
## Proposed Changes
- Schedule subscriptions to subnets for future slots.
- Finish removing hashmap_delay, in favor of [delay_map](https://github.com/AgeManning/delay_map). This was the only remaining service to do this.
- Subscriptions for past slots are rejected, before we would subscribe for one slot.
- Add a new test for subscriptions that are not consecutive.
## Additional Info
This is also an effort in making the code easier to understand
## Issue Addressed
NA
## Proposed Changes
As we've seen on Prater, there seems to be a correlation between these messages
```
WARN Not enough time for a discovery search subnet_id: ExactSubnet { subnet_id: SubnetId(19), slot: Slot(3742336) }, service: attestation_service
```
... and nodes falling 20-30 slots behind the head for short periods. These nodes are running ~20k Prater validators.
After running some metrics, I can see that the `network_recv` channel is processing ~250k `AttestationSubscribe` messages per minute. It occurred to me that perhaps the `AttestationSubscribe` messages are "washing out" the `SendRequest` and `SendResponse` messages. In this PR I separate the `AttestationSubscribe` and `SyncCommitteeSubscribe` messages into their own queue so the `tokio::select!` in the `NetworkService` can still process the other messages in the `network_recv` channel without necessarily having to clear all the subscription messages first.
~~I've also added filter to the HTTP API to prevent duplicate subscriptions going to the network service.~~
## Additional Info
- Currently being tested on Prater
## Issue Addressed
NA
## Proposed Changes
Bump versions to v3.0.0
## Additional Info
- ~~Blocked on #3439~~
- ~~Blocked on #3459~~
- ~~Blocked on #3463~~
- ~~Blocked on #3462~~
- ~~Requires further testing~~
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
N/A
## Proposed Changes
Fix clippy lints for latest rust version 1.63. I have allowed the [derive_partial_eq_without_eq](https://rust-lang.github.io/rust-clippy/master/index.html#derive_partial_eq_without_eq) lint as satisfying this lint would result in more code that we might not want and I feel it's not required.
Happy to fix this lint across lighthouse if required though.
## Issue Addressed
N/A
## Proposed Changes
If the build tree is not a git repository, the unit test will fail. This PR fixes the issue.
## Additional Info
N/A
## Issue Addressed
Resolves#3388Resolves#2638
## Proposed Changes
- Return the `BellatrixPreset` on `/eth/v1/config/spec` by default.
- Allow users to opt out of this by providing `--http-spec-fork=altair` (unless there's a Bellatrix fork epoch set).
- Add the Altair constants from #2638 and make serving the constants non-optional (the `http-disable-legacy-spec` flag is deprecated).
- Modify the VC to only read the `Config` and not to log extra fields. This prevents it from having to muck around parsing the `ConfigAndPreset` fields it doesn't need.
## Additional Info
This change is backwards-compatible for the VC and the BN, but is marked as a breaking change for the removal of `--http-disable-legacy-spec`.
I tried making `Config` a `superstruct` too, but getting the automatic decoding to work was a huge pain and was going to require a lot of hacks, so I gave up in favour of keeping the default-based approach we have now.
## Issue Addressed
NA
## Proposed Changes
Update bootnodes for Prater. There are new IP addresses for the Sigma Prime nodes. Teku and Nimbus nodes were also added.
## Additional Info
Related: 24760cd4b4
## Issue Addressed
NA
## Proposed Changes
Modifies `lcli skip-slots` and `lcli transition-blocks` allow them to source blocks/states from a beaconAPI and also gives them some more features to assist with benchmarking.
## Additional Info
Breaks the current `lcli skip-slots` and `lcli transition-blocks` APIs by changing some flag names. It should be simple enough to figure out the changes via `--help`.
Currently blocked on #3263.
## Issue Addressed
https://github.com/status-im/nimbus-eth2/issues/3930
## Proposed Changes
We can trivially support beacon nodes which do not provide the `is_optimistic` field by wrapping the field in an `Option`.
## Issue Addressed
Fixes an issue identified by @remyroy whereby we were logging a recommendation to use `--eth1-endpoints` on merge-ready setups (when the execution layer was out of sync).
## Proposed Changes
I took the opportunity to clean up the other eth1-related logs, replacing "eth1" by "deposit contract" or "execution" as appropriate.
I've downgraded the severity of the `CRIT` log to `ERRO` and removed most of the recommendation text. The reason being that users lacking an execution endpoint will be informed by the new `WARN Not merge ready` log pre-Bellatrix, or the regular errors from block verification post-Bellatrix.
## Issue Addressed
https://github.com/sigp/lighthouse/issues/3091
Extends https://github.com/sigp/lighthouse/pull/3062, adding pre-bellatrix block support on blinded endpoints and allowing the normal proposal flow (local payload construction) on blinded endpoints. This resulted in better fallback logic because the VC will not have to switch endpoints on failure in the BN <> Builder API, the BN can just fallback immediately and without repeating block processing that it shouldn't need to. We can also keep VC fallback from the VC<>BN API's blinded endpoint to full endpoint.
## Proposed Changes
- Pre-bellatrix blocks on blinded endpoints
- Add a new `PayloadCache` to the execution layer
- Better fallback-from-builder logic
## Todos
- [x] Remove VC transition logic
- [x] Add logic to only enable builder flow after Merge transition finalization
- [x] Tests
- [x] Fix metrics
- [x] Rustdocs
Co-authored-by: Mac L <mjladson@pm.me>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
As specified in the [Beacon Chain API specs](https://github.com/ethereum/beacon-APIs/blob/master/apis/node/syncing.yaml#L32-L35) we should return `is_optimistic` as part of the response to a query for the `eth/v1/node/syncing` endpoint.
## Proposed Changes
Compute the optimistic status of the head and add it to the `SyncingData` response.
## Issue Addressed
#3031
## Proposed Changes
Updates the following API endpoints to conform with https://github.com/ethereum/beacon-APIs/pull/190 and https://github.com/ethereum/beacon-APIs/pull/196
- [x] `beacon/states/{state_id}/root`
- [x] `beacon/states/{state_id}/fork`
- [x] `beacon/states/{state_id}/finality_checkpoints`
- [x] `beacon/states/{state_id}/validators`
- [x] `beacon/states/{state_id}/validators/{validator_id}`
- [x] `beacon/states/{state_id}/validator_balances`
- [x] `beacon/states/{state_id}/committees`
- [x] `beacon/states/{state_id}/sync_committees`
- [x] `beacon/headers`
- [x] `beacon/headers/{block_id}`
- [x] `beacon/blocks/{block_id}`
- [x] `beacon/blocks/{block_id}/root`
- [x] `beacon/blocks/{block_id}/attestations`
- [x] `debug/beacon/states/{state_id}`
- [x] `debug/beacon/heads`
- [x] `validator/duties/attester/{epoch}`
- [x] `validator/duties/proposer/{epoch}`
- [x] `validator/duties/sync/{epoch}`
Updates the following Server-Sent Events:
- [x] `events?topics=head`
- [x] `events?topics=block`
- [x] `events?topics=finalized_checkpoint`
- [x] `events?topics=chain_reorg`
## Backwards Incompatible
There is a very minor breaking change with the way the API now handles requests to `beacon/blocks/{block_id}/root` and `beacon/states/{state_id}/root` when `block_id` or `state_id` is the `Root` variant of `BlockId` and `StateId` respectively.
Previously a request to a non-existent root would simply echo the root back to the requester:
```
curl "http://localhost:5052/eth/v1/beacon/states/0xaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/root"
{"data":{"root":"0xaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"}}
```
Now it will return a `404`:
```
curl "http://localhost:5052/eth/v1/beacon/blocks/0xaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/root"
{"code":404,"message":"NOT_FOUND: beacon block with root 0xaaaa…aaaa","stacktraces":[]}
```
In addition to this is the block root `0x0000000000000000000000000000000000000000000000000000000000000000` previously would return the genesis block. It will now return a `404`:
```
curl "http://localhost:5052/eth/v1/beacon/blocks/0x0000000000000000000000000000000000000000000000000000000000000000"
{"code":404,"message":"NOT_FOUND: beacon block with root 0x0000…0000","stacktraces":[]}
```
## Additional Info
- `execution_optimistic` is always set, and will return `false` pre-Bellatrix. I am also open to the idea of doing something like `#[serde(skip_serializing_if = "Option::is_none")]`.
- The value of `execution_optimistic` is set to `false` where possible. Any computation that is reliant on the `head` will simply use the `ExecutionStatus` of the head (unless the head block is pre-Bellatrix).
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
- Resolves#3338
## Proposed Changes
This PR adds a new `--network goerli` flag that reuses the [Prater network configs](https://github.com/sigp/lighthouse/tree/stable/common/eth2_network_config/built_in_network_configs/prater).
As you'll see in #3338, there are several approaches to the problem of the Goerli/Prater alias. This approach achieves:
1. No duplication of the genesis state between Goerli and Prater.
- Upside: the genesis state for Prater is ~17mb, duplication would increase the size of the binary by that much.
2. When the user supplies `--network goerli`, they will get a datadir in `~/.lighthouse/goerli`.
- Upside: our docs stay correct when they declare a datadir is located at `~/.lighthouse/{network}`
- Downside: switching from `--network prater` to `--network goerli` will require some manual migration.
3. When using `--network goerli`, the [`config/spec`](https://ethereum.github.io/beacon-APIs/#/Config/getSpec) endpoint will return a [`CONFIG_NAME`](02a2b71d64/configs/mainnet.yaml (L11)) of "prater".
- Upside: VC running `--network prater` will still think it's on the same network as one using `--network goerli`.
- Downside: potentially confusing.
#3348 achieves the same goal as this PR with a different approach and set of trade-offs.
## Additional Info
### Notes for reviewers:
In e4896c2682 you'll see that I remove the `$name_str` by just using `stringify!($name_ident)` instead. This is a simplification that should have have been there in the first place.
Then, in 90b5e22fca I reclaim that second parameter with a new purpose; to specify the directory from which to load configs.
## Issue Addressed
#3302
## Proposed Changes
Move the `reqwest::Client` from being initialized per-validator, to being initialized per distinct Web3Signer.
This is done by placing the `Client` into a `HashMap` keyed by the definition of the Web3Signer as specified by the `ValidatorDefintion`. This will allow multiple Web3Signers to be used with a single VC and also maintains backwards compatibility.
## Additional Info
This was done to reduce the memory used by the VC when connecting to a Web3Signer.
I set up a local testnet using [a custom script](https://github.com/macladson/lighthouse/tree/web3signer-local-test/scripts/local_testnet_web3signer) and ran a VC with 200 validator keys:
VC with Web3Signer:
- `unstable`: ~200MB
- With fix: ~50MB
VC with Local Signer:
- `unstable`: ~35MB
- With fix: ~35MB
> I'm seeing some fragmentation with the VC using the Web3Signer, but not when using a local signer (this is most likely due to making lots of http requests and dealing with lots of JSON objects). I tested the above using `MALLOC_ARENA_MAX=1` to try to reduce the fragmentation. Without it, the values are around +50MB for both `unstable` and the fix.
## Issue Addressed
Resolves#3276.
## Proposed Changes
Add a timeout for the sync committee contributions at 1/4 the slot length such that we may be able to try backup beacon nodes in the case of contribution post failure.
## Additional Info
1/4 slot length seemed standard for the timeouts, but may want to decrease this to 1/2.
I did not find any timeout related / sync committee related tests, so there are no tests. Happy to write some with a bit of guidance.
## Issue Addressed
* #3173
## Proposed Changes
Moved all `fee_recipient_file` related logic inside the `ValidatorStore` as it makes more sense to have this all together there. I tested this with the validators I have on `mainnet-shadow-fork-5` and everything appeared to work well. Only technicality is that I can't get the method to return `401` when the authorization header is not specified (it returns `400` instead). Fixing this is probably quite difficult given that none of `warp`'s rejections have code `401`.. I don't really think this matters too much though as long as it fails.
## Overview
This rather extensive PR achieves two primary goals:
1. Uses the finalized/justified checkpoints of fork choice (FC), rather than that of the head state.
2. Refactors fork choice, block production and block processing to `async` functions.
Additionally, it achieves:
- Concurrent forkchoice updates to the EL and cache pruning after a new head is selected.
- Concurrent "block packing" (attestations, etc) and execution payload retrieval during block production.
- Concurrent per-block-processing and execution payload verification during block processing.
- The `Arc`-ification of `SignedBeaconBlock` during block processing (it's never mutated, so why not?):
- I had to do this to deal with sending blocks into spawned tasks.
- Previously we were cloning the beacon block at least 2 times during each block processing, these clones are either removed or turned into cheaper `Arc` clones.
- We were also `Box`-ing and un-`Box`-ing beacon blocks as they moved throughout the networking crate. This is not a big deal, but it's nice to avoid shifting things between the stack and heap.
- Avoids cloning *all the blocks* in *every chain segment* during sync.
- It also has the potential to clean up our code where we need to pass an *owned* block around so we can send it back in the case of an error (I didn't do much of this, my PR is already big enough 😅)
- The `BeaconChain::HeadSafetyStatus` struct was removed. It was an old relic from prior merge specs.
For motivation for this change, see https://github.com/sigp/lighthouse/pull/3244#issuecomment-1160963273
## Changes to `canonical_head` and `fork_choice`
Previously, the `BeaconChain` had two separate fields:
```
canonical_head: RwLock<Snapshot>,
fork_choice: RwLock<BeaconForkChoice>
```
Now, we have grouped these values under a single struct:
```
canonical_head: CanonicalHead {
cached_head: RwLock<Arc<Snapshot>>,
fork_choice: RwLock<BeaconForkChoice>
}
```
Apart from ergonomics, the only *actual* change here is wrapping the canonical head snapshot in an `Arc`. This means that we no longer need to hold the `cached_head` (`canonical_head`, in old terms) lock when we want to pull some values from it. This was done to avoid deadlock risks by preventing functions from acquiring (and holding) the `cached_head` and `fork_choice` locks simultaneously.
## Breaking Changes
### The `state` (root) field in the `finalized_checkpoint` SSE event
Consider the scenario where epoch `n` is just finalized, but `start_slot(n)` is skipped. There are two state roots we might in the `finalized_checkpoint` SSE event:
1. The state root of the finalized block, which is `get_block(finalized_checkpoint.root).state_root`.
4. The state root at slot of `start_slot(n)`, which would be the state from (1), but "skipped forward" through any skip slots.
Previously, Lighthouse would choose (2). However, we can see that when [Teku generates that event](de2b2801c8/data/beaconrestapi/src/main/java/tech/pegasys/teku/beaconrestapi/handlers/v1/events/EventSubscriptionManager.java (L171-L182)) it uses [`getStateRootFromBlockRoot`](de2b2801c8/data/provider/src/main/java/tech/pegasys/teku/api/ChainDataProvider.java (L336-L341)) which uses (1).
I have switched Lighthouse from (2) to (1). I think it's a somewhat arbitrary choice between the two, where (1) is easier to compute and is consistent with Teku.
## Notes for Reviewers
I've renamed `BeaconChain::fork_choice` to `BeaconChain::recompute_head`. Doing this helped ensure I broke all previous uses of fork choice and I also find it more descriptive. It describes an action and can't be confused with trying to get a reference to the `ForkChoice` struct.
I've changed the ordering of SSE events when a block is received. It used to be `[block, finalized, head]` and now it's `[block, head, finalized]`. It was easier this way and I don't think we were making any promises about SSE event ordering so it's not "breaking".
I've made it so fork choice will run when it's first constructed. I did this because I wanted to have a cached version of the last call to `get_head`. Ensuring `get_head` has been run *at least once* means that the cached values doesn't need to wrapped in an `Option`. This was fairly simple, it just involved passing a `slot` to the constructor so it knows *when* it's being run. When loading a fork choice from the store and a slot clock isn't handy I've just used the `slot` that was saved in the `fork_choice_store`. That seems like it would be a faithful representation of the slot when we saved it.
I added the `genesis_time: u64` to the `BeaconChain`. It's small, constant and nice to have around.
Since we're using FC for the fin/just checkpoints, we no longer get the `0x00..00` roots at genesis. You can see I had to remove a work-around in `ef-tests` here: b56be3bc2. I can't find any reason why this would be an issue, if anything I think it'll be better since the genesis-alias has caught us out a few times (0x00..00 isn't actually a real root). Edit: I did find a case where the `network` expected the 0x00..00 alias and patched it here: 3f26ac3e2.
You'll notice a lot of changes in tests. Generally, tests should be functionally equivalent. Here are the things creating the most diff-noise in tests:
- Changing tests to be `tokio::async` tests.
- Adding `.await` to fork choice, block processing and block production functions.
- Refactor of the `canonical_head` "API" provided by the `BeaconChain`. E.g., `chain.canonical_head.cached_head()` instead of `chain.canonical_head.read()`.
- Wrapping `SignedBeaconBlock` in an `Arc`.
- In the `beacon_chain/tests/block_verification`, we can't use the `lazy_static` `CHAIN_SEGMENT` variable anymore since it's generated with an async function. We just generate it in each test, not so efficient but hopefully insignificant.
I had to disable `rayon` concurrent tests in the `fork_choice` tests. This is because the use of `rayon` and `block_on` was causing a panic.
Co-authored-by: Mac L <mjladson@pm.me>
## Issue Addressed
This PR is a subset of the changes in #3134. Unstable will still not function correctly with the new builder spec once this is merged, #3134 should be used on testnets
## Proposed Changes
- Removes redundancy in "builders" (servers implementing the builder spec)
- Renames `payload-builder` flag to `builder`
- Moves from old builder RPC API to new HTTP API, but does not implement the validator registration API (implemented in https://github.com/sigp/lighthouse/pull/3194)
Co-authored-by: sean <seananderson33@gmail.com>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
Lays the groundwork for builder API changes by implementing the beacon-API's new `register_validator` endpoint
## Proposed Changes
- Add a routine in the VC that runs on startup (re-try until success), once per epoch or whenever `suggested_fee_recipient` is updated, signing `ValidatorRegistrationData` and sending it to the BN.
- TODO: `gas_limit` config options https://github.com/ethereum/builder-specs/issues/17
- BN only sends VC registration data to builders on demand, but VC registration data *does update* the BN's prepare proposer cache and send an updated fcU to a local EE. This is necessary for fee recipient consistency between the blinded and full block flow in the event of fallback. Having the BN only send registration data to builders on demand gives feedback directly to the VC about relay status. Also, since the BN has no ability to sign these messages anyways (so couldn't refresh them if it wanted), and validator registration is independent of the BN head, I think this approach makes sense.
- Adds upcoming consensus spec changes for this PR https://github.com/ethereum/consensus-specs/pull/2884
- I initially applied the bit mask based on a configured application domain.. but I ended up just hard coding it here instead because that's how it's spec'd in the builder repo.
- Should application mask appear in the api?
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Proposed Changes
Add a new HTTP endpoint `POST /lighthouse/analysis/block_rewards` which takes a vec of `BeaconBlock`s as input and outputs the `BlockReward`s for them.
Augment the `BlockReward` struct with the attestation data for attestations in the block, which simplifies access to this information from blockprint. Using attestation data I've been able to make blockprint up to 95% accurate across Prysm/Lighthouse/Teku/Nimbus. I hope to go even higher using a bunch of synthetic blocks produced for Prysm/Nimbus/Lodestar, which are underrepresented in the current training data.
## Issue Addressed
NA
## Proposed Changes
Please list or describe the changes introduced by this PR.
## Additional Info
- Pending testing on our infra. **Please do not merge**
## Issue Addressed
NA
## Proposed Changes
Adds the configuration for the upcoming merge of the Ropsten network, as per:
https://github.com/eth-clients/merge-testnets/pull/9
Use the Ropsten network with: `lighthouse --network ropsten`
## Additional Info
This is still a work-in-progress. We should wait for the eth-clients/merge-testnets PR to be approved before merging this into our `unstable`.
## Issue Addressed
Web3Signer validators do not support client authentication. This means the `--tls-known-clients-file` option on Web3Signer can't be used with Lighthouse.
## Proposed Changes
Add two new fields to Web3Signer validators, `client_identity_path` and `client_identity_password`, which specify the path and password for a PKCS12 file containing a certificate and private key. If `client_identity_path` is present, use the certificate for SSL client authentication.
## Additional Info
I am successfully validating on Prater using client authentication with Web3Signer and client authentication.
## Issue Addressed
Which issue # does this PR address?
#3114
## Proposed Changes
1. introduce `mime` package
2. Parse `Accept` field in the header with `mime`
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
# Description
Since the `TaskExecutor` currently requires a `Weak<Runtime>`, it's impossible to use it in an async test where the `Runtime` is created outside our scope. Whilst we *could* create a new `Runtime` instance inside the async test, dropping that `Runtime` would cause a panic (you can't drop a `Runtime` in an async context).
To address this issue, this PR creates the `enum Handle`, which supports either:
- A `Weak<Runtime>` (for use in our production code)
- A `Handle` to a runtime (for use in testing)
In theory, there should be no change to the behaviour of our production code (beyond some slightly different descriptions in HTTP 500 errors), or even our tests. If there is no change, you might ask *"why bother?"*. There are two PRs (#3070 and #3175) that are waiting on these fixes to introduce some new tests. Since we've added the EL to the `BeaconChain` (for the merge), we are now doing more async stuff in tests.
I've also added a `RuntimeExecutor` to the `BeaconChainTestHarness`. Whilst that's not immediately useful, it will become useful in the near future with all the new async testing.
## Issue Addressed
#3068
## Proposed Changes
Adds support for remote key API.
## Additional Info
Needed to add `is_local_keystore` argument to `delete_definition_and_keystore` to know if we want to delete local or remote key. Previously this wasn't necessary because remotekeys(web3signers) could be deleted.
## Issue Addressed
Resolves#3102
## Proposed Changes
- https://github.com/sigp/lighthouse/issues/3102#issuecomment-1114835063
- This is not an ideal solution, since the commit hash is missing from version number, but I think it is sufficient.
## Additional Info
I've tested ... :
- `fallback` is updated via `change_version.sh`.
```shell
$ cd scripts/
$ ./change_version.sh 2.2.1 2.2.2
$ git diff ../common/lighthouse_version/src/lib.rs
```
```diff
@ common/lighthouse_version/src/lib.rs:20 @ pub const VERSION: &str = git_version!(
// NOTE: using --match instead of --exclude for compatibility with old Git
"--match=thiswillnevermatchlol"
],
- prefix = "Lighthouse/v2.2.1-",
- fallback = "Lighthouse/v2.2.1"
+ prefix = "Lighthouse/v2.2.2-",
+ fallback = "Lighthouse/v2.2.2"
);
```
- a package built without git info prints expected version number (v2.2.1).
```shell
$ git archive HEAD --output=/tmp/lighthouse.zip
$ cd /tmp
$ unzip lighthouse.zip
$ cd lighthouse
$ cargo build --release
$ target/release/lighthouse --version
Lighthouse v2.2.1
BLS library: blst
SHA256 hardware acceleration: false
Specs: mainnet (true), minimal (false), gnosis (false)
```
## Issue Addressed
In very rare occasions we've seen most if not all our peers in a chain with which we don't agree. Purging these peers can take a very long time: number of retries of the chain. Meanwhile sync is caught in a loop trying the chain again and again. This makes it so that we fast track purging peers via registering the failed chain to prevent retrying for some time (30 seconds). Longer times could be dangerous since a chain can fail if a batch fails to download for example. In this case, I think it's still acceptable to fast track purging peers since they are nor providing the required info anyway
Co-authored-by: Divma <26765164+divagant-martian@users.noreply.github.com>
## Issue Addressed
Addresses sync stalls on v2.2.0 (i.e. https://github.com/sigp/lighthouse/issues/3147).
## Additional Info
I've avoided doing a full `cargo update` because I noticed there's a new patch version of libp2p and thought it could do with some more testing.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Proposed Changes
Cut release v2.2.0 including proposer boost.
## Additional Info
I also updated the clippy lints for the imminent release of Rust 1.60, although LH v2.2.0 will continue to compile using Rust 1.58 (our MSRV).
## Proposed Changes
I did some gardening 🌳 in our dependency tree:
- Remove duplicate versions of `warp` (git vs patch)
- Remove duplicate versions of lots of small deps: `cpufeatures`, `ethabi`, `ethereum-types`, `bitvec`, `nix`, `libsecp256k1`.
- Update MDBX (should resolve#3028). I tested and Lighthouse compiles on Windows 11 now.
- Restore `psutil` back to upstream
- Make some progress updating everything to rand 0.8. There are a few crates stuck on 0.7.
Hopefully this puts us on a better footing for future `cargo audit` issues, and improves compile times slightly.
## Additional Info
Some crates are held back by issues with `zeroize`. libp2p-noise depends on [`chacha20poly1305`](https://crates.io/crates/chacha20poly1305) which depends on zeroize < v1.5, and we can only have one version of zeroize because it's post 1.0 (see https://github.com/rust-lang/cargo/issues/6584). The latest version of `zeroize` is v1.5.4, which is used by the new versions of many other crates (e.g. `num-bigint-dig`). Once a new version of chacha20poly1305 is released we can update libp2p-noise and upgrade everything to the latest `zeroize` version.
I've also opened a PR to `blst` related to zeroize: https://github.com/supranational/blst/pull/111
## Proposed Changes
Increase the default `--slots-per-restore-point` to 8192 for a 4x reduction in freezer DB disk usage.
Existing nodes that use the previous default of 2048 will be left unchanged. Newly synced nodes (with or without checkpoint sync) will use the new 8192 default.
Long-term we could do away with the freezer DB entirely for validator-only nodes, but this change is much simpler and grants us some extra space in the short term. We can also roll it out gradually across our nodes by purging databases one by one, while keeping the Ansible config the same.
## Additional Info
We ignore a change from 2048 to 8192 if the user hasn't set the 8192 explicitly. We fire a debug log in the case where we do ignore:
```
DEBG Ignoring slots-per-restore-point config in favour of on-disk value, on_disk: 2048, config: 8192
```
## Proposed Changes
Mitigate the fork choice attacks described in [_Three Attacks on Proof-of-Stake Ethereum_](https://arxiv.org/abs/2110.10086) by enabling proposer boost @ 70% on mainnet.
Proposer boost has been running with stability on Prater for a few months now, and is safe to roll out gradually on mainnet. I'll argue that the financial impact of rolling out gradually is also minimal.
Consider how a proposer-boosted validator handles two types of re-orgs:
## Ex ante re-org (from the paper)
In the mitigated attack, a malicious proposer releases their block at slot `n + 1` late so that it re-orgs the block at the slot _after_ them (at slot `n + 2`). Non-boosting validators will follow this re-org and vote for block `n + 1` in slot `n + 2`. Boosted validators will vote for `n + 2`. If the boosting validators are outnumbered, there'll be a re-org to the malicious block from `n + 1` and validators applying the boost will have their slot `n + 2` attestations miss head (and target on an epoch boundary). Note that all the attesters from slot `n + 1` are doomed to lose their head vote rewards, but this is the same regardless of boosting.
Therefore, Lighthouse nodes stand to miss slightly more head votes than other nodes if they are in the minority while applying the proposer boost. Once the proposer boost nodes gain a majority, this trend reverses.
## Ex post re-org (using the boost)
The other type of re-org is an ex post re-org using the strategy described here: https://github.com/sigp/lighthouse/pull/2860. With this strategy, boosted nodes will follow the attempted re-org and again lose a head vote if the re-org is unsuccessful. Once boosting is widely adopted, the re-orgs will succeed and the non-boosting validators will lose out.
I don't think there are (m)any validators applying this strategy, because it is irrational to attempt it before boosting is widely adopted. Therefore I think we can safely ignore this possibility.
## Risk Assessment
From observing re-orgs on mainnet I don't think ex ante re-orgs are very common. I've observed around 1 per day for the last month on my node (see: https://gist.github.com/michaelsproul/3b2142fa8fe0ff767c16553f96959e8c), compared to 2.5 ex post re-orgs per day.
Given one extra slot per day where attesting will cause a missed head vote, each individual validator has a 1/32 chance of being assigned to that slot. So we have an increase of 1/32 missed head votes per validator per day in expectation. Given that we currently see ~7 head vote misses per validator per day due to late/missing blocks (and re-orgs), this represents only a (1/32)/7 = 0.45% increase in missed head votes in expectation. I believe this is so small that we shouldn't worry about it. Particularly as getting proposer boost deployed is good for network health and may enable us to drive down the number of late blocks over time (which will decrease head vote misses).
## TL;DR
Enable proposer boost now and release ASAP, as financial downside is a 0.45% increase in missed head votes until widespread adoption.
## Issue Addressed
MEV boost compatibility
## Proposed Changes
See #2987
## Additional Info
This is blocked on the stabilization of a couple specs, [here](https://github.com/ethereum/beacon-APIs/pull/194) and [here](https://github.com/flashbots/mev-boost/pull/20).
Additional TODO's and outstanding questions
- [ ] MEV boost JWT Auth
- [ ] Will `builder_proposeBlindedBlock` return the revealed payload for the BN to propogate
- [ ] Should we remove `private-tx-proposals` flag and communicate BN <> VC with blinded blocks by default once these endpoints enter the beacon-API's repo? This simplifies merge transition logic.
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Proposed Changes
Allow Lighthouse to speculatively create blocks via the `/eth/v1/validators/blocks` endpoint by optionally skipping the RANDAO verification that we introduced in #2740. When `verify_randao=false` is passed as a query parameter the `randao_reveal` is not required to be present, and if present will only be lightly checked (must be a valid BLS sig). If `verify_randao` is omitted it defaults to true and Lighthouse behaves exactly as it did previously, hence this PR is backwards-compatible.
I'd like to get this change into `unstable` pretty soon as I've got 3 projects building on top of it:
- [`blockdreamer`](https://github.com/michaelsproul/blockdreamer), which mocks block production every slot in order to fingerprint clients
- analysis of Lighthouse's block packing _optimality_, which uses `blockdreamer` to extract interesting instances of the attestation packing problem
- analysis of Lighthouse's block packing _performance_ (as in speed) on the `tree-states` branch
## Additional Info
Having tested `blockdreamer` with Prysm, Nimbus and Teku I noticed that none of them verify the randao signature on `/eth/v1/validator/blocks`. I plan to open a PR to the `beacon-APIs` repo anyway so that this parameter can be standardised in case the other clients add RANDAO verification by default in future.
## Issue Addressed
#3103
## Proposed Changes
Parse `http-address` and `metrics-address` as `IpAddr` for both the beacon node and validator client to support IPv6 addresses.
Also adjusts parsing of CORS origins to allow for IPv6 addresses.
## Usage
You can now set `http-address` and/or `metrics-address` flags to IPv6 addresses.
For example, the following:
`lighthouse bn --http --http-address :: --metrics --metrics-address ::1`
will expose the beacon node HTTP server on `[::]` (equivalent of `0.0.0.0` in IPv4) and the metrics HTTP server on `localhost` (the equivalent of `127.0.0.1` in IPv4)
The beacon node API can then be accessed by:
`curl "http://[server-ipv6-address]:5052/eth/v1/some_endpoint"`
And the metrics server api can be accessed by:
`curl "http://localhost:5054/metrics"` or by `curl "http://[::1]:5054/metrics"`
## Additional Info
On most Linux distributions the `v6only` flag is set to `false` by default (see the section for the `IPV6_V6ONLY` flag in https://www.man7.org/linux/man-pages/man7/ipv6.7.html) which means IPv4 connections will continue to function on a IPv6 address (providing it is appropriately mapped). This means that even if the Lighthouse API is running on `::` it is also possible to accept IPv4 connections.
However on Windows, this is not the case. The `v6only` flag is set to `true` so binding to `::` will only allow IPv6 connections.
## Issue Addressed
NA
## Proposed Changes
- Bump version to `v2.1.4`
- Run `cargo update`
## Additional Info
I think this release should be published around the 15th of March.
Presently `blocked` for testing on our infrastructure.
## Issue Addressed
Which issue # does this PR address?
## Proposed Changes
Please list or describe the changes introduced by this PR.
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
#3010
## Proposed Changes
- move log debounce time latch to `./common/logging`
- add timelatch to limit logging for `attestations_delay_queue` and `queued_block_roots`
## Additional Info
- Is a separate crate for the time latch preferred?
- `elapsed()` could take `LOG_DEBOUNCE_INTERVAL ` as an argument to allow for different granularity.
## Description
This PR adds a single, trivial commit (f5d2b27d78349d5a675a2615eba42cc9ae708094) atop #2986 to resolve a tests compile error. The original author (@ethDreamer) is AFK so I'm getting this one merged ☺️
Please see #2986 for more information about the other, significant changes in this PR.
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
Co-authored-by: ethDreamer <37123614+ethDreamer@users.noreply.github.com>
## Issue Addressed
NA
## Proposed Changes
Adds the functionality to allow blocks to be validated/invalidated after their import as per the [optimistic sync spec](https://github.com/ethereum/consensus-specs/blob/dev/sync/optimistic.md#how-to-optimistically-import-blocks). This means:
- Updating `ProtoArray` to allow flipping the `execution_status` of ancestors/descendants based on payload validity updates.
- Creating separation between `execution_layer` and the `beacon_chain` by creating a `PayloadStatus` struct.
- Refactoring how the `execution_layer` selects a `PayloadStatus` from the multiple statuses returned from multiple EEs.
- Adding testing framework for optimistic imports.
- Add `ExecutionBlockHash(Hash256)` new-type struct to avoid confusion between *beacon block roots* and *execution payload hashes*.
- Add `merge` to [`FORKS`](c3a793fd73/Makefile (L17)) in the `Makefile` to ensure we test the beacon chain with merge settings.
- Fix some tests here that were failing due to a missing execution layer.
## TODO
- [ ] Balance tests
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
## Proposed Changes
Lots of lint updates related to `flat_map`, `unwrap_or_else` and string patterns. I did a little more creative refactoring in the op pool, but otherwise followed Clippy's suggestions.
## Additional Info
We need this PR to unblock CI.
## Issue Addressed
N/A
## Proposed Changes
Add a HTTP API which can be used to compute the block packing data for all blocks over a discrete range of epochs.
## Usage
### Request
```
curl "http:localhost:5052/lighthouse/analysis/block_packing_efficiency?start_epoch=57730&end_epoch=57732"
```
### Response
```
[
{
"slot": "1847360",
"block_hash": "0xa7dc230659802df2f99ea3798faede2e75942bb5735d56e6bfdc2df335dcd61f",
"proposer_info": {
"validator_index": 1686,
"graffiti": ""
},
"available_attestations": 7096,
"included_attestations": 6459,
"prior_skip_slots": 0
},
...
]
```
## Additional Info
This is notably different to the existing lcli code:
- Uses `BlockReplayer` #2863 and as such runs significantly faster than the previous method.
- Corrects the off-by-one #2878
- Removes the `offline` validators component. This was only a "best guess" and simply was used as a way to determine an estimate of the "true" packing efficiency and was generally not helpful in terms of direct comparisons between different packing methods. As such it has been removed from the API and any future estimates of "offline" validators would be better suited in a separate/more targeted API or as part of 'beacon watch': #2873
- Includes `prior_skip_slots`.
## Issue Addressed
NA
## Proposed Changes
This PR extends #3018 to address my review comments there and add automated integration tests with Geth (and other implementations, in the future).
I've also de-duplicated the "unused port" logic by creating an `common/unused_port` crate.
## Additional Info
I'm not sure if we want to merge this PR, or update #3018 and merge that. I don't mind, I'm primarily opening this PR to make sure CI works.
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
## Issue Addressed
Closes#3014
## Proposed Changes
- Rename `receipt_root` to `receipts_root`
- Rename `execute_payload` to `notify_new_payload`
- This is slightly weird since we modify everything except the actual HTTP call to the engine API. That change is expected to be implemented in #2985 (cc @ethDreamer)
- Enable "random" tests for Bellatrix.
## Notes
This will break *partially* compatibility with Kintusgi testnets in order to gain compatibility with [Kiln](https://hackmd.io/@n0ble/kiln-spec) testnets. I think it will only break the BN APIs due to the `receipts_root` change, however it might have some other effects too.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
N/A
## Proposed Changes
Removes all configurations and hard-coded rules related to the deprecated Pyrmont testnet.
## Additional Info
Pyrmont is deprecated/will be shut down after being used for scenario testing, this PR removes configurations related to it.
Co-authored-by: Zachinquarantine <zachinquarantine@yahoo.com>
## Issue Addressed
#2883
## Proposed Changes
* Added `suggested-fee-recipient` & `suggested-fee-recipient-file` flags to validator client (similar to graffiti / graffiti-file implementation).
* Added proposer preparation service to VC, which sends the fee-recipient of all known validators to the BN via [/eth/v1/validator/prepare_beacon_proposer](https://github.com/ethereum/beacon-APIs/pull/178) api once per slot
* Added [/eth/v1/validator/prepare_beacon_proposer](https://github.com/ethereum/beacon-APIs/pull/178) api endpoint and preparation data caching
* Added cleanup routine to remove cached proposer preparations when not updated for 2 epochs
## Additional Info
Changed the Implementation following the discussion in #2883.
Co-authored-by: pk910 <philipp@pk910.de>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Co-authored-by: Philipp K <philipp@pk910.de>
## Issue Addressed
Implements the standard key manager API from https://ethereum.github.io/keymanager-APIs/, formerly https://github.com/ethereum/beacon-APIs/pull/151
Related to https://github.com/sigp/lighthouse/issues/2557
## Proposed Changes
- [x] Add all of the new endpoints from the standard API: GET, POST and DELETE.
- [x] Add a `validators.enabled` column to the slashing protection database to support atomic disable + export.
- [x] Add tests for all the common sequential accesses of the API
- [x] Add tests for interactions with remote signer validators
- [x] Add end-to-end tests for migration of validators from one VC to another
- [x] Implement the authentication scheme from the standard (token bearer auth)
## Additional Info
The `enabled` column in the validators SQL database is necessary to prevent a race condition when exporting slashing protection data. Without the slashing protection database having a way of knowing that a key has been disabled, a concurrent request to sign a message could insert a new record into the database. The `delete_concurrent_with_signing` test exercises this code path, and was indeed failing before the `enabled` column was added.
The validator client authentication has been modified from basic auth to bearer auth, with basic auth preserved for backwards compatibility.
## Proposed Changes
Add a new hardcoded spec for the Gnosis Beacon Chain.
Ideally, official Lighthouse executables will be able to connect to the gnosis beacon chain from now on, using `--network gnosis` CLI option.
## Issue Addressed
N/A
## Proposed Changes
Add a HTTP API which can be used to compute the attestation performances of a validator (or all validators) over a discrete range of epochs.
Performances can be computed for a single validator, or for the global validator set.
## Usage
### Request
The API can be used as follows:
```
curl "http://localhost:5052/lighthouse/analysis/attestation_performance/{validator_index}?start_epoch=57730&end_epoch=57732"
```
Alternatively, to compute performances for the global validator set:
```
curl "http://localhost:5052/lighthouse/analysis/attestation_performance/global?start_epoch=57730&end_epoch=57732"
```
### Response
The response is JSON formatted as follows:
```
[
{
"index": 72,
"epochs": {
"57730": {
"active": true,
"head": false,
"target": false,
"source": false
},
"57731": {
"active": true,
"head": true,
"target": true,
"source": true,
"delay": 1
},
"57732": {
"active": true,
"head": true,
"target": true,
"source": true,
"delay": 1
},
}
}
]
```
> Note that the `"epochs"` are not guaranteed to be in ascending order.
## Additional Info
- This API is intended to be used in our upcoming validator analysis tooling (#2873) and will likely not be very useful for regular users. Some advanced users or block explorers may find this API useful however.
- The request range is limited to 100 epochs (since the range is inclusive and it also computes the `end_epoch` it's actually 101 epochs) to prevent Lighthouse using exceptionally large amounts of memory.
## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/2857
## Proposed Changes
Explicitly set GNU malloc's MMAP_THRESHOLD to 128KB, disabling dynamic adjustments. For rationale see the linked issue.
## Issue Addressed
NA
## Proposed Changes
- Bump Lighthouse version to v2.1.1
- Update `thread_local` from v1.1.3 to v1.1.4 to address https://rustsec.org/advisories/RUSTSEC-2022-0006
## Additional Info
- ~~Blocked on #2950~~
- ~~Blocked on #2952~~
## Proposed Changes
This PR establishes compatibility between Lighthouse's VC and Nimbus's BN.
Lighthouse was previously `POST`ing unquoted lists of validator indices to the attester and sync duties endpoints which were (correctly) not accepted by Nimbus. These lists had slipped through the cracks because they didn't have an explicit wrapper type to add `serde` annotations to. I've added the `ValidatorIndexDataRef` newtype in order to implement the modified serialisation behaviour.
## Testing
Combined with https://github.com/sigp/lighthouse/pull/2940, I've confirmed that this PR allows my Lighthouse VC on Prater to validate with the public Nimbus BN listed here: https://github.com/status-im/nimbus-eth2#quickly-test-your-tooling-against-nimbus. I haven't had a block proposal yet, but attestations and sync committee messages are working.
## Additional Info
This may also provide compatibility with Prysm BNs but I haven't had a chance to test that yet.
## Issues Addressed
Closes#2739Closes#2812
## Proposed Changes
Support the deserialization of query strings containing duplicate keys into their corresponding types.
As `warp` does not support this feature natively (as discussed in #2739), it relies on the external library [`serde_array_query`](https://github.com/sigp/serde_array_query) (written by @michaelsproul)
This is backwards compatible meaning that both of the following requests will produce the same output:
```
curl "http://localhost:5052/eth/v1/events?topics=head,block"
```
```
curl "http://localhost:5052/eth/v1/events?topics=head&topics=block"
```
## Additional Info
Certain error messages have changed slightly. This only affects endpoints which accept multiple values.
For example:
```
{"code":400,"message":"BAD_REQUEST: invalid query: Invalid query string","stacktraces":[]}
```
is now
```
{"code":400,"message":"BAD_REQUEST: unable to parse query","stacktraces":[]}
```
The serve order of the endpoints `get_beacon_state_validators` and `get_beacon_state_validators_id` have flipped:
```rust
.or(get_beacon_state_validators_id.boxed())
.or(get_beacon_state_validators.boxed())
```
This is to ensure proper error messages when filter fallback occurs due to the use of the `and_then` filter.
## Future Work
- Cleanup / remove filter fallback behaviour by substituting `and_then` with `then` where appropriate.
- Add regression tests for HTTP API error messages.
## Credits
- @mooori for doing the ground work of investigating possible solutions within the existing Rust ecosystem.
- @michaelsproul for writing [`serde_array_query`](https://github.com/sigp/serde_array_query) and for helping debug the behaviour of the `warp` filter fallback leading to incorrect error messages.
## Proposed Changes
Change the canonical fork name for the merge to Bellatrix. Keep other merge naming the same to avoid churn.
I've also fixed and enabled the `fork` and `transition` tests for Bellatrix, and the v1.1.7 fork choice tests.
Additionally, the `BellatrixPreset` has been added with tests. It gets served via the `/config/spec` API endpoint along with the other presets.
## Issue Addressed
NA
## Proposed Changes
We have observed occasions were under-resourced nodes will receive messages that were valid *at the time*, but later become invalidated due to long waits for a `BeaconProcessor` worker.
In this PR, we will check to see if the message was valid *at the time of receipt*. If it was initially valid but invalid now, we just ignore the message without penalizing the peer.
## Additional Info
NA
## Proposed Changes
Add `mallinfo2` behind a feature flag so that we can get accurate memory metrics during debugging. It can be enabled when building Lighthouse like so (so long as the platform supports it):
```
cargo install --path lighthouse --features "malloc_utils/mallinfo2"
```
## Issue Addressed
Resolves: https://github.com/sigp/lighthouse/issues/2741
Includes: https://github.com/sigp/lighthouse/pull/2853 so that we can get ssz static tests passing here on v1.1.6. If we want to merge that first, we can make this diff slightly smaller
## Proposed Changes
- Changes the `justified_epoch` and `finalized_epoch` in the `ProtoArrayNode` each to an `Option<Checkpoint>`. The `Option` is necessary only for the migration, so not ideal. But does allow us to add a default logic to `None` on these fields during the database migration.
- Adds a database migration from a legacy fork choice struct to the new one, search for all necessary block roots in fork choice by iterating through blocks in the db.
- updates related to https://github.com/ethereum/consensus-specs/pull/2727
- We will have to update the persisted forkchoice to make sure the justified checkpoint stored is correct according to the updated fork choice logic. This boils down to setting the forkchoice store's justified checkpoint to the justified checkpoint of the block that advanced the finalized checkpoint to the current one.
- AFAICT there's no migration steps necessary for the update to allow applying attestations from prior blocks, but would appreciate confirmation on that
- I updated the consensus spec tests to v1.1.6 here, but they will fail until we also implement the proposer score boost updates. I confirmed that the previously failing scenario `new_finalized_slot_is_justified_checkpoint_ancestor` will now pass after the boost updates, but haven't confirmed _all_ tests will pass because I just quickly stubbed out the proposer boost test scenario formatting.
- This PR now also includes proposer boosting https://github.com/ethereum/consensus-specs/pull/2730
## Additional Info
I realized checking justified and finalized roots in fork choice makes it more likely that we trigger this bug: https://github.com/ethereum/consensus-specs/pull/2727
It's possible the combination of justified checkpoint and finalized checkpoint in the forkchoice store is different from in any block in fork choice. So when trying to startup our store's justified checkpoint seems invalid to the rest of fork choice (but it should be valid). When this happens we get an `InvalidBestNode` error and fail to start up. So I'm including that bugfix in this branch.
Todo:
- [x] Fix fork choice tests
- [x] Self review
- [x] Add fix for https://github.com/ethereum/consensus-specs/pull/2727
- [x] Rebase onto Kintusgi
- [x] Fix `num_active_validators` calculation as @michaelsproul pointed out
- [x] Clean up db migrations
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
New rust lints
## Proposed Changes
- Boxing some enum variants
- removing some unused fields (is the validator lockfile unused? seemed so to me)
## Additional Info
- some error fields were marked as dead code but are logged out in areas
- left some dead fields in our ef test code because I assume they are useful for debugging?
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Closes#1996
## Proposed Changes
Run a second `Logger` via `sloggers` which logs to a file in the background with:
- separate `debug-level` for background and terminal logging
- the ability to limit log size
- rotation through a customizable number of log files
- an option to compress old log files (`.gz` format)
Add the following new CLI flags:
- `--logfile-debug-level`: The debug level of the log files
- `--logfile-max-size`: The maximum size of each log file
- `--logfile-max-number`: The number of old log files to store
- `--logfile-compress`: Whether to compress old log files
By default background logging uses the `debug` log level and saves logfiles to:
- Beacon Node: `$HOME/.lighthouse/$network/beacon/logs/beacon.log`
- Validator Client: `$HOME/.lighthouse/$network/validators/logs/validator.log`
Or, when using the `--datadir` flag:
`$datadir/beacon/logs/beacon.log` and `$datadir/validators/logs/validator.log`
Once rotated, old logs are stored like so: `beacon.log.1`, `beacon.log.2` etc.
> Note: `beacon.log.1` is always newer than `beacon.log.2`.
## Additional Info
Currently the default value of `--logfile-max-size` is 200 (MB) and `--logfile-max-number` is 5.
This means that the maximum storage space that the logs will take up by default is 1.2GB.
(200MB x 5 from old log files + <200MB the current logfile being written to)
Happy to adjust these default values to whatever people think is appropriate.
It's also worth noting that when logging to a file, we lose our custom `slog` formatting. This means the logfile logs look like this:
```
Oct 27 16:02:50.305 INFO Lighthouse started, version: Lighthouse/v2.0.1-8edd9d4+, module: lighthouse:413
Oct 27 16:02:50.305 INFO Configured for network, name: prater, module: lighthouse:414
```
While testing some code on Windows, I ran into a failure when using `clippy` via (`make lint`):
```
error: this expression borrows a reference (`&str`) that is immediately dereferenced by the compiler
--> common/filesystem/src/lib.rs:105:43
|
105 | let mut acl = ACL::from_file_path(&path_str, false).map_err(Error::UnableToRetrieveACL)?;
| ^^^^^^^^^ help: change this to: `path_str`
|
= note: `-D clippy::needless-borrow` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
error: could not compile `filesystem` due to previous error
```
## Proposed Changes
Remove the unnecessary borrow as suggested.
## Additional Info
Since we are only running `clippy` in CI on Ubuntu, I believe we don't have any way (in CI) to detect these Windows specific lint errors (either from new code, or from linting changes from new Rust versions.
This is because code marked as `#[cfg(windows)]` is not checked on `unix` systems and vice versa.
I'm conscious that our CI runs are already taking a long time, and that adding a new Windows `clippy` run would add a non-negligible amount of time to the runs (not sure if this topic has already been discussed), but it something to be aware of.
## Extra Note
I don't think this is the case, but it might be worth someone else running `make lint` on their Windows machines to eliminate the possibility that this is an error specific to my setup.
