## Issue Addressed
Resolves#2612
## Proposed Changes
Implements both the checks mentioned in the original issue.
1. Verifies the `randao_reveal` in the beacon node
2. Cross checks the proposer index after getting back the block from the beacon node.
## Additional info
The block production time increases by ~10x because of the signature verification on the beacon node (based on the `beacon_block_production_process_seconds` metric) when running on a local testnet.
## Proposed Changes
Add several metrics for the number of attestations in the op pool. These give us a way to observe the number of valid, non-trivial attestations during block packing rather than just the size of the entire op pool.
## Issue Addressed
Getting too many peers kicked due to slightly late sync committee messages as tested on.. under-performant hardware.
## Proposed Changes
Only penalize if the message is more than one slot late. Still ignore the message-
Co-authored-by: Divma <26765164+divagant-martian@users.noreply.github.com>
This is a pre-cursor to the next libp2p upgrade.
It is currently being used for staging a number of PR upgrades which are contingent on the latest libp2p.
## Issue Addressed
The [p2p-interface section of the `altair` spec](https://github.com/ethereum/consensus-specs/blob/dev/specs/altair/p2p-interface.md#transitioning-the-gossip) says you should subscribe to the topics for a fork "In advance of the fork" and unsubscribe from old topics `2 Epochs` after the new fork is activated. We've chosen to subscribe to new fork topics `2 slots` before the fork is initiated.
This function is supposed to return the required fork digests at any given time but as it was currently written, it doesn't return the fork digest for a previous fork if you've switched to the current fork less than 2 epoch's ago. Also this function required modification for every new fork we add.
## Proposed Changes
Make this function fork-agnostic and correctly handle the previous fork topic digests when you've only just switched to the new fork.
## Issue Addressed
Resolves#2611
## Proposed Changes
Adds a duplicate block root cache to the `BeaconProcessor`. Adds the block root to the cache before calling `process_gossip_block` and `process_rpc_block`. Since `process_rpc_block` is called only for single block lookups, we don't have to worry about batched block imports.
The block is imported from the source(gossip/rpc) that arrives first. The block that arrives second is not imported to avoid the db access issue.
There are 2 cases:
1. Block that arrives second is from rpc: In this case, we return an optimistic `BlockError::BlockIsAlreadyKnown` to sync.
2. Block that arrives second is from gossip: In this case, we only do gossip verification and forwarding but don't import the block into the the beacon chain.
## Additional info
Splits up `process_gossip_block` function to `process_gossip_unverified_block` and `process_gossip_verified_block`.
## Proposed Changes
* Add the `Eth-Consensus-Version` header to the HTTP API for the block and state endpoints. This is part of the v2.1.0 API that was recently released: https://github.com/ethereum/beacon-APIs/pull/170
* Add tests for the above. I refactored the `eth2` crate's helper functions to make this more straight-forward, and introduced some new mixin traits that I think greatly improve readability and flexibility.
* Add a new `map_with_fork!` macro which is useful for decoding a superstruct type without naming all its variants. It is now used for SSZ-decoding `BeaconBlock` and `BeaconState`, and for JSON-decoding `SignedBeaconBlock` in the API.
## Additional Info
The `map_with_fork!` changes will conflict with the Merge changes, but when resolving the conflict the changes from this branch should be preferred (it is no longer necessary to enumerate every fork). The merge fork _will_ need to be added to `map_fork_name_with`.
## Issue Addressed
Currently, if you launch the beacon node with the `--purge-db` flag and the `beacon` directory exists, but one (or both) of the `chain_db` or `freezer-db` directories are missing, it will error unnecessarily with:
```
Failed to remove chain_db: No such file or directory (os error 2)
```
This is an edge case which can occur in cases of manual intervention (a user deleted the directory) or if you had previously run with the `--purge-db` flag and Lighthouse errored before it could initialize the db directories.
## Proposed Changes
Check if the `chain_db`/`freezer_db` exists before attempting to remove them. This prevents unnecessary errors.
## Issue Addressed
Attempts to fix#2701 but I doubt this is the reason behind that.
## Proposed Changes
maintain a waker in the rpc handler and call it if an event is received
## Issue Addressed
In the backfill sync the state was maintained twice, once locally and also in the globals. This makes it so that it's maintained only once.
The only behavioral change is that when backfill sync in paused, the global backfill state is updated. I asked @AgeManning about this and he deemed it a bug, so this solves it.
## Issue Addressed
When compiling with Rust 1.56.0 the compiler generates 3 instances of this warning:
```
warning: trailing semicolon in macro used in expression position
--> common/eth2_network_config/src/lib.rs:181:24
|
181 | })?;
| ^
...
195 | let deposit_contract_deploy_block = load_from_file!(DEPLOY_BLOCK_FILE);
| ---------------------------------- in this macro invocation
|
= note: `#[warn(semicolon_in_expressions_from_macros)]` on by default
= warning: this was previously accepted by the compiler but is being phased out; it will become a hard error in a future release!
= note: for more information, see issue #79813 <https://github.com/rust-lang/rust/issues/79813>
= note: this warning originates in the macro `load_from_file` (in Nightly builds, run with -Z macro-backtrace for more info)
```
This warning is completely harmless, but will be visible to users compiling Lighthouse v2.0.1 (or earlier) with Rust 1.56.0 (to be released October 21st). It is **completely safe** to ignore this warning, it's just a superficial change to Rust's syntax.
## Proposed Changes
This PR removes the semi-colon as recommended, and fixes the new Clippy lints from 1.56.0
## Issue Addressed
Mitigates #1096
## Proposed Changes
Add a flag to the beacon node called `--disable-lock-timeouts` which allows opting out of lock timeouts.
The lock timeouts serve a dual purpose:
1. They prevent any single operation from hogging the lock for too long. When a timeout occurs it logs a nasty error which indicates that there's suboptimal lock use occurring, which we can then act on.
2. They allow deadlock detection. We're fairly sure there are no deadlocks left in Lighthouse anymore but the timeout locks offer a safeguard against that.
However, timeouts on locks are not without downsides:
They allow for the possibility of livelock, particularly on slower hardware. If lock timeouts keep failing spuriously the node can be prevented from making any progress, even if it would be able to make progress slowly without the timeout. One particularly concerning scenario which could occur would be if a DoS attack succeeded in slowing block signature verification times across the network, and all Lighthouse nodes got livelocked because they timed out repeatedly. This could also occur on just a subset of nodes (e.g. dual core VPSs or Raspberri Pis).
By making the behaviour runtime configurable this PR allows us to choose the behaviour we want depending on circumstance. I suspect that long term we could make the timeout-free approach the default (#2381 moves in this direction) and just enable the timeouts on our testnet nodes for debugging purposes. This PR conservatively leaves the default as-is so we can gain some more experience before switching the default.
## Description
The `eth2_libp2p` crate was originally named and designed to incorporate a simple libp2p integration into lighthouse. Since its origins the crates purpose has expanded dramatically. It now houses a lot more sophistication that is specific to lighthouse and no longer just a libp2p integration.
As of this writing it currently houses the following high-level lighthouse-specific logic:
- Lighthouse's implementation of the eth2 RPC protocol and specific encodings/decodings
- Integration and handling of ENRs with respect to libp2p and eth2
- Lighthouse's discovery logic, its integration with discv5 and logic about searching and handling peers.
- Lighthouse's peer manager - This is a large module handling various aspects of Lighthouse's network, such as peer scoring, handling pings and metadata, connection maintenance and recording, etc.
- Lighthouse's peer database - This is a collection of information stored for each individual peer which is specific to lighthouse. We store connection state, sync state, last seen ips and scores etc. The data stored for each peer is designed for various elements of the lighthouse code base such as syncing and the http api.
- Gossipsub scoring - This stores a collection of gossipsub 1.1 scoring mechanisms that are continuously analyssed and updated based on the ethereum 2 networks and how Lighthouse performs on these networks.
- Lighthouse specific types for managing gossipsub topics, sync status and ENR fields
- Lighthouse's network HTTP API metrics - A collection of metrics for lighthouse network monitoring
- Lighthouse's custom configuration of all networking protocols, RPC, gossipsub, discovery, identify and libp2p.
Therefore it makes sense to rename the crate to be more akin to its current purposes, simply that it manages the majority of Lighthouse's network stack. This PR renames this crate to `lighthouse_network`
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
- Update versions to `v2.0.1` in anticipation for a release early next week.
- Add `--ignore` to `cargo audit`. See #2727.
## Additional Info
NA
## Description
This PR updates the peer connection transition logic. It is acceptable for a peer to immediately transition from a disconnected state to a disconnecting state. This can occur when we are at our peer limit and a new peer's dial us.
## Issue Addressed
NA
## Proposed Changes
Adds some more testing for Altair to the op pool. Credits to @michaelsproul for some appropriated efforts here.
## Additional Info
NA
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Proposed Changes
Clone the proposer pubkeys during backfill signature verification to reduce the time that the pubkey cache lock is held for. Cloning such a small number of pubkeys has negligible impact on the total running time, but greatly reduces lock contention.
On a Ryzen 5950X, the setup step seems to take around 180us regardless of whether the key is cloned or not, while the verification takes 7ms. When Lighthouse is limited to 10% of one core using `sudo cpulimit --pid <pid> --limit 10` the total time jumps up to 800ms, but the setup step remains only 250us. This means that under heavy load this PR could cut the time the lock is held for from 800ms to 250us, which is a huge saving of 99.97%!
## Issue Addressed
#2695
## Proposed Changes
This updates discovery to the latest version which has patched a panic that occurred due to a race condition in the bucket logic.
## Issue Addressed
NA
## Proposed Changes
This PR is near-identical to https://github.com/sigp/lighthouse/pull/2652, however it is to be merged into `unstable` instead of `merge-f2f`. Please see that PR for reasoning.
I'm making this duplicate PR to merge to `unstable` in an effort to shrink the diff between `unstable` and `merge-f2f` by doing smaller, lead-up PRs.
## Additional Info
NA
Currently, the beacon node has no ability to serve the HTTP API over TLS.
Adding this functionality would be helpful for certain use cases, such as when you need a validator client to connect to a backup beacon node which is outside your local network, and the use of an SSH tunnel or reverse proxy would be inappropriate.
## Proposed Changes
- Add three new CLI flags to the beacon node
- `--http-enable-tls`: enables TLS
- `--http-tls-cert`: to specify the path to the certificate file
- `--http-tls-key`: to specify the path to the key file
- Update the HTTP API to optionally use `warp`'s [`TlsServer`](https://docs.rs/warp/0.3.1/warp/struct.TlsServer.html) depending on the presence of the `--http-enable-tls` flag
- Update tests and docs
- Use a custom branch for `warp` to ensure proper error handling
## Additional Info
Serving the API over TLS should currently be considered experimental. The reason for this is that it uses code from an [unmerged PR](https://github.com/seanmonstar/warp/pull/717). This commit provides the `try_bind_with_graceful_shutdown` method to `warp`, which is helpful for controlling error flow when the TLS configuration is invalid (cert/key files don't exist, incorrect permissions, etc).
I've implemented the same code in my [branch here](https://github.com/macladson/warp/tree/tls).
Once the code has been reviewed and merged upstream into `warp`, we can remove the dependency on my branch and the feature can be considered more stable.
Currently, the private key file must not be password-protected in order to be read into Lighthouse.
## Proposed Changes
This is a refactor of the PeerDB and PeerManager. A number of bugs have been surfacing around the connection state of peers and their interaction with the score state.
This refactor tightens the mutability properties of peers such that only specific modules are able to modify the state of peer information preventing inadvertant state changes that can lead to our local peer manager db being out of sync with libp2p.
Further, the logic around connection and scoring was quite convoluted and the distinction between the PeerManager and Peerdb was not well defined. Although these issues are not fully resolved, this PR is step to cleaning up this logic. The peerdb solely manages most mutability operations of peers leaving high-order logic to the peer manager.
A single `update_connection_state()` function has been added to the peer-db making it solely responsible for modifying the peer's connection state. The way the peer's scores can be modified have been reduced to three simple functions (`update_scores()`, `update_gossipsub_scores()` and `report_peer()`). This prevents any add-hoc modifications of scores and only natural processes of score modification is allowed which simplifies the reasoning of score and state changes.
## Issue Addressed
Fix `cargo audit` failures on `unstable`
Closes#2698
## Proposed Changes
The main culprit is `nix`, which is vulnerable for versions below v0.23.0. We can't get by with a straight-forward `cargo update` because `psutil` depends on an old version of `nix` (cf. https://github.com/rust-psutil/rust-psutil/pull/93). Hence I've temporarily forked `psutil` under the `sigp` org, where I've included the update to `nix` v0.23.0.
Additionally, I took the chance to update the `time` dependency to v0.3, which removed a bunch of stale deps including `stdweb` which is no longer maintained. Lighthouse only uses the `time` crate in the notifier to do some pretty printing, and so wasn't affected by any of the breaking changes in v0.3 ([changelog here](https://github.com/time-rs/time/blob/main/CHANGELOG.md#030-2021-07-30)).
## Issue Addressed
Resolves#2563
Replacement for #2653 as I'm not able to reopen that PR after force pushing.
## Proposed Changes
Fixes all broken api links. Cherry picked changes in #2590 and updated a few more links.
Co-authored-by: Mason Stallmo <masonstallmo@gmail.com>
## Issue Addressed
Resolves#2555
## Proposed Changes
Don't log errors on resubscribing to topics. Also don't log errors if we are setting already set attnet/syncnet bits.
## Issue Addressed
Fix#2585
## Proposed Changes
Provide a canonical version of test_logger that can be used
throughout lighthouse.
## Additional Info
This allows tests to conditionally emit logging data by adding
test_logger as the default logger. And then when executing
`cargo test --features logging/test_logger` log output
will be visible:
wink@3900x:~/lighthouse/common/logging/tests/test-feature-test_logger (Add-test_logger-as-feature-to-logging)
$ cargo test --features logging/test_logger
Finished test [unoptimized + debuginfo] target(s) in 0.02s
Running unittests (target/debug/deps/test_logger-e20115db6a5e3714)
running 1 test
Sep 10 12:53:45.212 INFO hi, module: test_logger:8
test tests::test_fn_with_logging ... ok
test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.00s
Doc-tests test-logger
running 0 tests
test result: ok. 0 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.00s
Or, in normal scenarios where logging isn't needed, executing
`cargo test` the log output will not be visible:
wink@3900x:~/lighthouse/common/logging/tests/test-feature-test_logger (Add-test_logger-as-feature-to-logging)
$ cargo test
Finished test [unoptimized + debuginfo] target(s) in 0.02s
Running unittests (target/debug/deps/test_logger-02e02f8d41e8cf8a)
running 1 test
test tests::test_fn_with_logging ... ok
test result: ok. 1 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.00s
Doc-tests test-logger
running 0 tests
test result: ok. 0 passed; 0 failed; 0 ignored; 0 measured; 0 filtered out; finished in 0.00s
## Issue Addressed
This PR addresses an issue found by @YorickDowne during testing of v2.0.0-rc.0.
Due to a lack of atomic database writes on checkpoint sync start-up, it was possible for the database to get into an inconsistent state from which it couldn't recover without `--purge-db`. The core of the issue was that the store's anchor info was being stored _before_ the `PersistedBeaconChain`. If a crash occured so that anchor info was stored but _not_ the `PersistedBeaconChain`, then on restart Lighthouse would think the database was unitialized and attempt to compare-and-swap a `None` value, but would actually find the stale info from the previous run.
## Proposed Changes
The issue is fixed by writing the anchor info, the split point, and the `PersistedBeaconChain` atomically on start-up. Some type-hinting ugliness was required, which could possibly be cleaned up in future refactors.
## Issue Addressed
This PR addresses issue #2657
## Proposed Changes
Changes `/eth/v1/config/deposit_contract` endpoint to return the chain ID from the loaded chain spec instead of eth1::DEFAULT_NETWORK_ID which is the Goerli chain ID of 5.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Proposed Changes
Cut the first release candidate for v2.0.0, in preparation for testing and release this week
## Additional Info
Builds on #2632, which should either be merged first or in the same batch
## Issue Addressed
N/A
## Proposed Changes
When peers switching to a disconnecting state, decrement the disconnected peers counter. This also downgrades some crit logs to errors.
I've also added a re-sync point when peers get unbanned the disconnected peer count will match back to the number of disconnected peers if it has gone out of sync previously.
## Issue Addressed
Closes#2528
## Proposed Changes
- Add `BlockTimesCache` to provide block timing information to `BeaconChain`. This allows additional metrics to be calculated for blocks that are set as head too late.
- Thread the `seen_timestamp` of blocks received from RPC responses (except blocks from syncing) through to the sync manager, similar to what is done for blocks from gossip.
## Additional Info
This provides the following additional metrics:
- `BEACON_BLOCK_OBSERVED_SLOT_START_DELAY_TIME`
- The delay between the start of the slot and when the block was first observed.
- `BEACON_BLOCK_IMPORTED_OBSERVED_DELAY_TIME`
- The delay between when the block was first observed and when the block was imported.
- `BEACON_BLOCK_HEAD_IMPORTED_DELAY_TIME`
- The delay between when the block was imported and when the block was set as head.
The metric `BEACON_BLOCK_IMPORTED_SLOT_START_DELAY_TIME` was removed.
A log is produced when a block is set as head too late, e.g.:
```
Aug 27 03:46:39.006 DEBG Delayed head block set_as_head_delay: Some(21.731066ms), imported_delay: Some(119.929934ms), observed_delay: Some(3.864596988s), block_delay: 4.006257988s, slot: 1931331, proposer_index: 24294, block_root: 0x937602c89d3143afa89088a44bdf4b4d0d760dad082abacb229495c048648a9e, service: beacon
```
## Issue Addressed
Resolves#2552
## Proposed Changes
Offers some improvement in inclusion distance calculation in the validator monitor.
When registering an attestation from a block, instead of doing `block.slot() - attesstation.data.slot()` to get the inclusion distance, we now pass the parent block slot from the beacon chain and do `parent_slot.saturating_sub(attestation.data.slot())`. This allows us to give best effort inclusion distance in scenarios where the attestation was included right after a skip slot. Note that this does not give accurate results in scenarios where the attestation was included few blocks after the skip slot.
In this case, if the attestation slot was `b1` and was included in block `b2` with a skip slot in between, we would get the inclusion delay as 0 (by ignoring the skip slot) which is the best effort inclusion delay.
```
b1 <- missed <- b2
```
Here, if the attestation slot was `b1` and was included in block `b3` with a skip slot and valid block `b2` in between, then we would get the inclusion delay as 2 instead of 1 (by ignoring the skip slot).
```
b1 <- missed <- b2 <- b3
```
A solution for the scenario 2 would be to count number of slots between included slot and attestation slot ignoring the skip slots in the beacon chain and pass the value to the validator monitor. But I'm concerned that it could potentially lead to db accesses for older blocks in extreme cases.
This PR also uses the validator monitor data for logging per epoch inclusion distance. This is useful as we won't get inclusion data in post-altair summaries.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
NA
## Proposed Changes
Implements the "union" type from the SSZ spec for `ssz`, `ssz_derive`, `tree_hash` and `tree_hash_derive` so it may be derived for `enums`:
https://github.com/ethereum/consensus-specs/blob/v1.1.0-beta.3/ssz/simple-serialize.md#union
The union type is required for the merge, since the `Transaction` type is defined as a single-variant union `Union[OpaqueTransaction]`.
### Crate Updates
This PR will (hopefully) cause CI to publish new versions for the following crates:
- `eth2_ssz_derive`: `0.2.1` -> `0.3.0`
- `eth2_ssz`: `0.3.0` -> `0.4.0`
- `eth2_ssz_types`: `0.2.0` -> `0.2.1`
- `tree_hash`: `0.3.0` -> `0.4.0`
- `tree_hash_derive`: `0.3.0` -> `0.4.0`
These these crates depend on each other, I've had to add a workspace-level `[patch]` for these crates. A follow-up PR will need to remove this patch, ones the new versions are published.
### Union Behaviors
We already had SSZ `Encode` and `TreeHash` derive for enums, however it just did a "transparent" pass-through of the inner value. Since the "union" decoding from the spec is in conflict with the transparent method, I've required that all `enum` have exactly one of the following enum-level attributes:
#### SSZ
- `#[ssz(enum_behaviour = "union")]`
- matches the spec used for the merge
- `#[ssz(enum_behaviour = "transparent")]`
- maintains existing functionality
- not supported for `Decode` (never was)
#### TreeHash
- `#[tree_hash(enum_behaviour = "union")]`
- matches the spec used for the merge
- `#[tree_hash(enum_behaviour = "transparent")]`
- maintains existing functionality
This means that we can maintain the existing transparent behaviour, but all existing users will get a compile-time error until they explicitly opt-in to being transparent.
### Legacy Option Encoding
Before this PR, we already had a union-esque encoding for `Option<T>`. However, this was with the *old* SSZ spec where the union selector was 4 bytes. During merge specification, the spec was changed to use 1 byte for the selector.
Whilst the 4-byte `Option` encoding was never used in the spec, we used it in our database. Writing a migrate script for all occurrences of `Option` in the database would be painful, especially since it's used in the `CommitteeCache`. To avoid the migrate script, I added a serde-esque `#[ssz(with = "module")]` field-level attribute to `ssz_derive` so that we can opt into the 4-byte encoding on a field-by-field basis.
The `ssz::legacy::four_byte_impl!` macro allows a one-liner to define the module required for the `#[ssz(with = "module")]` for some `Option<T> where T: Encode + Decode`.
Notably, **I have removed `Encode` and `Decode` impls for `Option`**. I've done this to force a break on downstream users. Like I mentioned, `Option` isn't used in the spec so I don't think it'll be *that* annoying. I think it's nicer than quietly having two different union implementations or quietly breaking the existing `Option` impl.
### Crate Publish Ordering
I've modified the order in which CI publishes crates to ensure that we don't publish a crate without ensuring we already published a crate that it depends upon.
## TODO
- [ ] Queue a follow-up `[patch]`-removing PR.
## Issue Addressed
NA
## Proposed Changes
Adds the ability to verify batches of aggregated/unaggregated attestations from the network.
When the `BeaconProcessor` finds there are messages in the aggregated or unaggregated attestation queues, it will first check the length of the queue:
- `== 1` verify the attestation individually.
- `>= 2` take up to 64 of those attestations and verify them in a batch.
Notably, we only perform batch verification if the queue has a backlog. We don't apply any artificial delays to attestations to try and force them into batches.
### Batching Details
To assist with implementing batches we modify `beacon_chain::attestation_verification` to have two distinct categories for attestations:
- *Indexed* attestations: those which have passed initial validation and were valid enough for us to derive an `IndexedAttestation`.
- *Verified* attestations: those attestations which were indexed *and also* passed signature verification. These are well-formed, interesting messages which were signed by validators.
The batching functions accept `n` attestations and then return `n` attestation verification `Result`s, where those `Result`s can be any combination of `Ok` or `Err`. In other words, we attempt to verify as many attestations as possible and return specific per-attestation results so peer scores can be updated, if required.
When we batch verify attestations, we first try to map all those attestations to *indexed* attestations. If any of those attestations were able to be indexed, we then perform batch BLS verification on those indexed attestations. If the batch verification succeeds, we convert them into *verified* attestations, disabling individual signature checking. If the batch fails, we convert to verified attestations with individual signature checking enabled.
Ultimately, we optimistically try to do a batch verification of attestation signatures and fall-back to individual verification if it fails. This opens an attach vector for "poisoning" the attestations and causing us to waste a batch verification. I argue that peer scoring should do a good-enough job of defending against this and the typical-case gains massively outweigh the worst-case losses.
## Additional Info
Before this PR, attestation verification took the attestations by value (instead of by reference). It turns out that this was unnecessary and, in my opinion, resulted in some undesirable ergonomics (e.g., we had to pass the attestation back in the `Err` variant to avoid clones). In this PR I've modified attestation verification so that it now takes a reference.
I refactored the `beacon_chain/tests/attestation_verification.rs` tests so they use a builder-esque "tester" struct instead of a weird macro. It made it easier for me to test individual/batch with the same set of tests and I think it was a nice tidy-up. Notably, I did this last to try and make sure my new refactors to *actual* production code would pass under the existing test suite.
## Issue Addressed
Closes#1891Closes#1784
## Proposed Changes
Implement checkpoint sync for Lighthouse, enabling it to start from a weak subjectivity checkpoint.
## Additional Info
- [x] Return unavailable status for out-of-range blocks requested by peers (#2561)
- [x] Implement sync daemon for fetching historical blocks (#2561)
- [x] Verify chain hashes (either in `historical_blocks.rs` or the calling module)
- [x] Consistency check for initial block + state
- [x] Fetch the initial state and block from a beacon node HTTP endpoint
- [x] Don't crash fetching beacon states by slot from the API
- [x] Background service for state reconstruction, triggered by CLI flag or API call.
Considered out of scope for this PR:
- Drop the requirement to provide the `--checkpoint-block` (this would require some pretty heavy refactoring of block verification)
Co-authored-by: Diva M <divma@protonmail.com>
In previous network updates we have made our libp2p connections more lean by limiting the maximum number of connections a lighthouse node will accept before libp2p rejects new connections.
However, we still maintain the logic that at maximum connections, we try to dial extra peers if they are needed by a validator client to publish messages on a specific subnet. The dials typically result in failures due the libp2p connection limits.
This PR adds an extra factor, `PRIORITY_PEER_EXCESS` which sets aside a new allocation of peers we are able to dial in case we need these peers for the VC client. This allocation sits along side the excess peer (which allows extra incoming peers on top of our target peer limit).
The drawback here, is that libp2p now allows extra peers to connect to us (beyond the standard peer limit) which the peer manager should subsequently reject.
This PR in general improves the handling around peer banning.
Specifically there were issues when multiple peers under a single IP connected to us after we banned the IP for poor behaviour.
This PR should now handle these peers gracefully as well as make some improvements around how we previously disconnected and banned peers.
The logic now goes as follows:
- Once a peer gets banned, its gets registered with its known IP addresses
- Once enough banned peers exist under a single IP that IP is banned
- We retain connections with existing peers under this IP
- Any new connections under this IP are rejected
## Issue Addressed
N/A
## Proposed Changes
Add a fork_digest to `ForkContext` only if it is set in the config.
Reject gossip messages on post fork topics before the fork happens.
Edit: Instead of rejecting gossip messages on post fork topics, we now subscribe to post fork topics 2 slots before the fork.
Co-authored-by: Age Manning <Age@AgeManning.com>
# Description
A few changes have been made to discovery. In particular a custom re-write of an LRU cache which previously was read/write O(N) for all our sessions ~5k, to a more reasonable hashmap-style O(1).
Further there has been reported issues in the current discv5, so added error handling to help identify the issue has been added.
The identify network debug logs can get quite noisy and are unnecessary to print on every request/response.
This PR reduces debug noise by only printing messages for identify messages that offer some new information.
