7fd9389a8c
10 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Divma
|
f11884ccdb |
enforce non zero enr ports (#4776)
## Issue Addressed Right now lighthouse accepts zero as enr ports. Since enr ports should be reachable, zero ports should be rejected here ## Proposed Changes - update the config to use `NonZerou16` as an ENR port for all enr-related fields. - the enr builder from config now sets the enr to the listening port only if the enr port is not already set (prev behaviour) and the listening port is not zero (new behaviour) - reject zero listening ports when used with `enr-match`. - boot node now rejects listening port as zero, since those are advertised. - generate-bootnode-enr also rejected zero listening ports for the same reason. - update local network scripts ## Additional Info Unrelated, but why do we overwrite `enr-x-port` values with listening ports if `enr-match` is present? we prob should only do this for enr values that are not already set. |
||
|
Divma
|
4435a22221 |
Cleanup unreachable code in lcli::generate_bootnode_enr and some tests (#4485)
## Issue Addressed n/a Noticed this while working on something else ## Proposed Changes - leverage the appropriate types to avoid a bunch of `unwrap` and errors ## Additional Info n/a |
||
|
Divma
|
e190ebb8a0 |
Support for Ipv6 (#4046)
## Issue Addressed Add support for ipv6 and dual stack in lighthouse. ## Proposed Changes From an user perspective, now setting an ipv6 address, optionally configuring the ports should feel exactly the same as using an ipv4 address. If listening over both ipv4 and ipv6 then the user needs to: - use the `--listen-address` two times (ipv4 and ipv6 addresses) - `--port6` becomes then required - `--discovery-port6` can now be used to additionally configure the ipv6 udp port ### Rough list of code changes - Discovery: - Table filter and ip mode set to match the listening config. - Ipv6 address, tcp port and udp port set in the ENR builder - Reported addresses now check which tcp port to give to libp2p - LH Network Service: - Can listen over Ipv6, Ipv4, or both. This uses two sockets. Using mapped addresses is disabled from libp2p and it's the most compatible option. - NetworkGlobals: - No longer stores udp port since was not used at all. Instead, stores the Ipv4 and Ipv6 TCP ports. - NetworkConfig: - Update names to make it clear that previous udp and tcp ports in ENR were Ipv4 - Add fields to configure Ipv6 udp and tcp ports in the ENR - Include advertised enr Ipv6 address. - Add type to model Listening address that's either Ipv4, Ipv6 or both. A listening address includes the ip, udp port and tcp port. - UPnP: - Kept only for ipv4 - Cli flags: - `--listen-addresses` now can take up to two values - `--port` will apply to ipv4 or ipv6 if only one listening address is given. If two listening addresses are given it will apply only to Ipv4. - `--port6` New flag required when listening over ipv4 and ipv6 that applies exclusively to Ipv6. - `--discovery-port` will now apply to ipv4 and ipv6 if only one listening address is given. - `--discovery-port6` New flag to configure the individual udp port of ipv6 if listening over both ipv4 and ipv6. - `--enr-udp-port` Updated docs to specify that it only applies to ipv4. This is an old behaviour. - `--enr-udp6-port` Added to configure the enr udp6 field. - `--enr-tcp-port` Updated docs to specify that it only applies to ipv4. This is an old behaviour. - `--enr-tcp6-port` Added to configure the enr tcp6 field. - `--enr-addresses` now can take two values. - `--enr-match` updated behaviour. - Common: - rename `unused_port` functions to specify that they are over ipv4. - add functions to get unused ports over ipv6. - Testing binaries - Updated code to reflect network config changes and unused_port changes. ## Additional Info TODOs: - use two sockets in discovery. I'll get back to this and it's on https://github.com/sigp/discv5/pull/160 - lcli allow listening over two sockets in generate_bootnodes_enr - add at least one smoke flag for ipv6 (I have tested this and works for me) - update the book |
||
Age Manning
|
81c667b58e |
Additional networking metrics (#2549)
Adds additional metrics for network monitoring and evaluation. Co-authored-by: Mark Mackey <mark@sigmaprime.io> |
||
|
Age Manning
|
df40700ddd |
Rename eth2_libp2p to lighthouse_network (#2702)
## Description The `eth2_libp2p` crate was originally named and designed to incorporate a simple libp2p integration into lighthouse. Since its origins the crates purpose has expanded dramatically. It now houses a lot more sophistication that is specific to lighthouse and no longer just a libp2p integration. As of this writing it currently houses the following high-level lighthouse-specific logic: - Lighthouse's implementation of the eth2 RPC protocol and specific encodings/decodings - Integration and handling of ENRs with respect to libp2p and eth2 - Lighthouse's discovery logic, its integration with discv5 and logic about searching and handling peers. - Lighthouse's peer manager - This is a large module handling various aspects of Lighthouse's network, such as peer scoring, handling pings and metadata, connection maintenance and recording, etc. - Lighthouse's peer database - This is a collection of information stored for each individual peer which is specific to lighthouse. We store connection state, sync state, last seen ips and scores etc. The data stored for each peer is designed for various elements of the lighthouse code base such as syncing and the http api. - Gossipsub scoring - This stores a collection of gossipsub 1.1 scoring mechanisms that are continuously analyssed and updated based on the ethereum 2 networks and how Lighthouse performs on these networks. - Lighthouse specific types for managing gossipsub topics, sync status and ENR fields - Lighthouse's network HTTP API metrics - A collection of metrics for lighthouse network monitoring - Lighthouse's custom configuration of all networking protocols, RPC, gossipsub, discovery, identify and libp2p. Therefore it makes sense to rename the crate to be more akin to its current purposes, simply that it manages the majority of Lighthouse's network stack. This PR renames this crate to `lighthouse_network` Co-authored-by: Paul Hauner <paul@paulhauner.com> |
||
realbigsean
|
303deb9969 |
Rust 1.54.0 lints (#2483)
## Issue Addressed N/A ## Proposed Changes - Removing a bunch of unnecessary references - Updated `Error::VariantError` to `Error::Variant` - There were additional enum variant lints that I ignored, because I thought our variant names were fine - removed `MonitoredValidator`'s `pubkey` field, because I couldn't find it used anywhere. It looks like we just use the string version of the pubkey (the `id` field) if there is no index ## Additional Info Co-authored-by: realbigsean <seananderson33@gmail.com> |
||
|
realbigsean
|
7a71977987 |
Clippy 1.49.0 updates and dht persistence test fix (#2156)
## Issue Addressed `test_dht_persistence` failing ## Proposed Changes Bind `NetworkService::start` to an underscore prefixed variable rather than `_`. `_` was causing it to be dropped immediately This was failing 5/100 times before this update, but I haven't been able to get it to fail after updating it Co-authored-by: realbigsean <seananderson33@gmail.com> |
||
Pawan Dhananjay
|
82a0973935 |
Fix EnrForkId computation (#1441)
## Issue Addressed Fixes #1433 ## Proposed Changes Fix the computation for EnrForkId for generating pre-genesis enr. |
||
|
Age Manning
|
b6408805a2
|
Stable futures (#879)
* Port eth1 lib to use stable futures * Port eth1_test_rig to stable futures * Port eth1 tests to stable futures * Port genesis service to stable futures * Port genesis tests to stable futures * Port beacon_chain to stable futures * Port lcli to stable futures * Fix eth1_test_rig (#1014) * Fix lcli * Port timer to stable futures * Fix timer * Port websocket_server to stable futures * Port notifier to stable futures * Add TODOS * Update hashmap hashset to stable futures * Adds panic test to hashset delay * Port remote_beacon_node to stable futures * Fix lcli merge conflicts * Non rpc stuff compiles * protocol.rs compiles * Port websockets, timer and notifier to stable futures (#1035) * Fix lcli * Port timer to stable futures * Fix timer * Port websocket_server to stable futures * Port notifier to stable futures * Add TODOS * Port remote_beacon_node to stable futures * Partial eth2-libp2p stable future upgrade * Finished first round of fighting RPC types * Further progress towards porting eth2-libp2p adds caching to discovery * Update behaviour * RPC handler to stable futures * Update RPC to master libp2p * Network service additions * Fix the fallback transport construction (#1102) * Correct warning * Remove hashmap delay * Compiling version of eth2-libp2p * Update all crates versions * Fix conversion function and add tests (#1113) * Port validator_client to stable futures (#1114) * Add PH & MS slot clock changes * Account for genesis time * Add progress on duties refactor * Add simple is_aggregator bool to val subscription * Start work on attestation_verification.rs * Add progress on ObservedAttestations * Progress with ObservedAttestations * Fix tests * Add observed attestations to the beacon chain * Add attestation observation to processing code * Add progress on attestation verification * Add first draft of ObservedAttesters * Add more tests * Add observed attesters to beacon chain * Add observers to attestation processing * Add more attestation verification * Create ObservedAggregators map * Remove commented-out code * Add observed aggregators into chain * Add progress * Finish adding features to attestation verification * Ensure beacon chain compiles * Link attn verification into chain * Integrate new attn verification in chain * Remove old attestation processing code * Start trying to fix beacon_chain tests * Split adding into pools into two functions * Add aggregation to harness * Get test harness working again * Adjust the number of aggregators for test harness * Fix edge-case in harness * Integrate new attn processing in network * Fix compile bug in validator_client * Update validator API endpoints * Fix aggreagation in test harness * Fix enum thing * Fix attestation observation bug: * Patch failing API tests * Start adding comments to attestation verification * Remove unused attestation field * Unify "is block known" logic * Update comments * Supress fork choice errors for network processing * Add todos * Tidy * Add gossip attn tests * Disallow test harness to produce old attns * Comment out in-progress tests * Partially address pruning tests * Fix failing store test * Add aggregate tests * Add comments about which spec conditions we check * Dont re-aggregate * Split apart test harness attn production * Fix compile error in network * Make progress on commented-out test * Fix skipping attestation test * Add fork choice verification tests * Tidy attn tests, remove dead code * Remove some accidentally added code * Fix clippy lint * Rename test file * Add block tests, add cheap block proposer check * Rename block testing file * Add observed_block_producers * Tidy * Switch around block signature verification * Finish block testing * Remove gossip from signature tests * First pass of self review * Fix deviation in spec * Update test spec tags * Start moving over to hashset * Finish moving observed attesters to hashmap * Move aggregation pool over to hashmap * Make fc attn borrow again * Fix rest_api compile error * Fix missing comments * Fix monster test * Uncomment increasing slots test * Address remaining comments * Remove unsafe, use cfg test * Remove cfg test flag * Fix dodgy comment * Revert "Update hashmap hashset to stable futures" This reverts commit d432378a3cc5cd67fc29c0b15b96b886c1323554. * Revert "Adds panic test to hashset delay" This reverts commit 281502396fc5b90d9c421a309c2c056982c9525b. * Ported attestation_service * Ported duties_service * Ported fork_service * More ports * Port block_service * Minor fixes * VC compiles * Update TODOS * Borrow self where possible * Ignore aggregates that are already known. * Unify aggregator modulo logic * Fix typo in logs * Refactor validator subscription logic * Avoid reproducing selection proof * Skip HTTP call if no subscriptions * Rename DutyAndState -> DutyAndProof * Tidy logs * Print root as dbg * Fix compile errors in tests * Fix compile error in test * Re-Fix attestation and duties service * Minor fixes Co-authored-by: Paul Hauner <paul@paulhauner.com> * Network crate update to stable futures * Port account_manager to stable futures (#1121) * Port account_manager to stable futures * Run async fns in tokio environment * Port rest_api crate to stable futures (#1118) * Port rest_api lib to stable futures * Reduce tokio features * Update notifier to stable futures * Builder update * Further updates * Convert self referential async functions * stable futures fixes (#1124) * Fix eth1 update functions * Fix genesis and client * Fix beacon node lib * Return appropriate runtimes from environment * Fix test rig * Refactor eth1 service update * Upgrade simulator to stable futures * Lighthouse compiles on stable futures * Remove println debugging statement * Update libp2p service, start rpc test upgrade * Update network crate for new libp2p * Update tokio::codec to futures_codec (#1128) * Further work towards RPC corrections * Correct http timeout and network service select * Use tokio runtime for libp2p * Revert "Update tokio::codec to futures_codec (#1128)" This reverts commit e57aea924acf5cbabdcea18895ac07e38a425ed7. * Upgrade RPC libp2p tests * Upgrade secio fallback test * Upgrade gossipsub examples * Clean up RPC protocol * Test fixes (#1133) * Correct websocket timeout and run on os thread * Fix network test * Clean up PR * Correct tokio tcp move attestation service tests * Upgrade attestation service tests * Correct network test * Correct genesis test * Test corrections * Log info when block is received * Modify logs and update attester service events * Stable futures: fixes to vc, eth1 and account manager (#1142) * Add local testnet scripts * Remove whiteblock script * Rename local testnet script * Move spawns onto handle * Fix VC panic * Initial fix to block production issue * Tidy block producer fix * Tidy further * Add local testnet clean script * Run cargo fmt * Tidy duties service * Tidy fork service * Tidy ForkService * Tidy AttestationService * Tidy notifier * Ensure await is not suppressed in eth1 * Ensure await is not suppressed in account_manager * Use .ok() instead of .unwrap_or(()) * RPC decoding test for proto * Update discv5 and eth2-libp2p deps * Fix lcli double runtime issue (#1144) * Handle stream termination and dialing peer errors * Correct peer_info variant types * Remove unnecessary warnings * Handle subnet unsubscription removal and improve logigng * Add logs around ping * Upgrade discv5 and improve logging * Handle peer connection status for multiple connections * Improve network service logging * Improve logging around peer manager * Upgrade swarm poll centralise peer management * Identify clients on error * Fix `remove_peer` in sync (#1150) * remove_peer removes from all chains * Remove logs * Fix early return from loop * Improved logging, fix panic * Partially correct tests * Stable futures: Vc sync (#1149) * Improve syncing heuristic * Add comments * Use safer method for tolerance * Fix tests * Stable futures: Fix VC bug, update agg pool, add more metrics (#1151) * Expose epoch processing summary * Expose participation metrics to prometheus * Switch to f64 * Reduce precision * Change precision * Expose observed attesters metrics * Add metrics for agg/unagg attn counts * Add metrics for gossip rx * Add metrics for gossip tx * Adds ignored attns to prom * Add attestation timing * Add timer for aggregation pool sig agg * Add write lock timer for agg pool * Add more metrics to agg pool * Change map lock code * Add extra metric to agg pool * Change lock handling in agg pool * Change .write() to .read() * Add another agg pool timer * Fix for is_aggregator * Fix pruning bug Co-authored-by: pawan <pawandhananjay@gmail.com> Co-authored-by: Paul Hauner <paul@paulhauner.com> |
||
Paul Hauner
|
7b86c9a08f
|
Update testnet tooling (#1001)
* Add progress on new deposits * Add deposited command to account manager * Remove old lcli::helpers mod * Clean clap_utils * Refactor lcli deposit contract commands to use IPC * Make testnet optional for environment * Use dbg formatting for deploy address * Add command to generate bootnode enr * Ensure lcli returns with 1 on error * Ensure account manager returns 1 on error * Disallow deposits to the zero address * Update web3 in eth1 crate * Ensure correct lighthouse dir is created * Reduce deposit gas requirement * Update cargo.lock * Add progress on new deposits * Add deposited command to account manager * Remove old lcli::helpers mod * Clean clap_utils * Refactor lcli deposit contract commands to use IPC * Add command to generate bootnode enr * Ensure lcli returns with 1 on error * Ensure account manager returns 1 on error * Update web3 in eth1 crate * Update Cargo.lock * Move lcli out of main install script * Change --limit to --at-least * Change --datadir to --validator-dir * Remove duplication in docs |