Commit Graph

765 Commits

Author SHA1 Message Date
Michael Sproul
efebf712dd Avoid cloning snapshots during sync (#3271)
## Issue Addressed

Closes https://github.com/sigp/lighthouse/issues/2944

## Proposed Changes

Remove snapshots from the cache during sync rather than cloning them. This reduces unnecessary cloning and memory fragmentation during sync.

## Additional Info

This PR relies on the fact that the `block_delay` cache is not populated for blocks from sync. Relying on block delay may have the side effect that a change in `block_delay` calculation could lead to: a) more clones, if block delays are added for syncing blocks or b) less clones, if blocks near the head are erroneously provided without a `block_delay`. Case (a) would be a regression to the current status quo, and (b) is low-risk given we know that the snapshot cache is current susceptible to misses (hence `tree-states`).
2022-06-20 23:20:29 +00:00
eklm
a9e158663b Fix validator_monitor_prev_epoch_ metrics (#2911)
## Issue Addressed

#2820

## Proposed Changes

The problem is that validator_monitor_prev_epoch metrics are updated only if there is EpochSummary present in summaries map for the previous epoch and it is not the case for the offline validator. Ensure that EpochSummary is inserted into summaries map also for the offline validators.
2022-06-20 04:06:30 +00:00
Michael Sproul
229f883968 Avoid parallel fork choice runs during sync (#3217)
## Issue Addressed

Fixes an issue that @paulhauner found with the v2.3.0 release candidate whereby the fork choice runs introduced by #3168 tripped over each other during sync:

```
May 24 23:06:40.542 WARN Error signalling fork choice waiter     slot: 3884129, error: ForkChoiceSignalOutOfOrder { current: Slot(3884131), latest: Slot(3884129) }, service: beacon
```

This can occur because fork choice is called from the state advance _and_ the per-slot task. When one of these runs takes a long time it can end up finishing after a run from a later slot, tripping the error above. The problem is resolved by not running either of these fork choice calls during sync.

Additionally, these parallel fork choice runs were causing issues in the database:

```
May 24 07:49:05.098 WARN Found a chain that should already have been pruned, head_slot: 92925, head_block_root: 0xa76c7bf1b98e54ed4b0d8686efcfdf853484e6c2a4c67e91cbf19e5ad1f96b17, service: beacon
May 24 07:49:05.101 WARN Database migration failed               error: HotColdDBError(FreezeSlotError { current_split_slot: Slot(92608), proposed_split_slot: Slot(92576) }), service: beacon
```

In this case, two fork choice calls triggering the finalization processing were being processed out of order due to differences in their processing time, causing the background migrator to try to advance finalization _backwards_ 😳. Removing the parallel fork choice runs from sync effectively addresses the issue, because these runs are most likely to have different finalized checkpoints (because of the speed at which fork choice advances during sync). In theory it's still possible to process updates out of order if any other fork choice runs end up completing out of order, but this should be much less common. Fixing out of order fork choice runs in general is difficult as it requires architectural changes like serialising fork choice updates through a single thread, or locking fork choice along with the head when it is mutated (https://github.com/sigp/lighthouse/pull/3175).

## Proposed Changes

* Don't run per-slot fork choice during sync (if head is older than 4 slots)
* Don't run state-advance fork choice during sync (if head is older than 4 slots)
* Check for monotonic finalization updates in the background migrator. This is a good defensive check to have, and I'm not sure why we didn't have it before (we may have had it and wrongly removed it).
2022-05-25 03:27:30 +00:00
Paul Hauner
7a64994283 Call per_slot_task from a blocking thread (v2) (#3199)
*This PR was adapted from @pawanjay176's work in #3197.*

## Issue Addressed

Fixes a regression in https://github.com/sigp/lighthouse/pull/3168

## Proposed Changes

https://github.com/sigp/lighthouse/pull/3168 added calls to `fork_choice` in  `BeaconChain::per_slot_task` function. This leads to a panic as `per_slot_task` is called from an async context which calls fork choice, which then calls `block_on`.

This PR changes the timer to call the `per_slot_task` function in a blocking thread.

Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
2022-05-20 23:05:07 +00:00
Michael Sproul
6eaeaa542f Fix Rust 1.61 clippy lints (#3192)
## Issue Addressed

This fixes the low-hanging Clippy lints introduced in Rust 1.61 (due any hour now). It _ignores_ one lint, because fixing it requires a structural refactor of the validator client that needs to be done delicately. I've started on that refactor and will create another PR that can be reviewed in more depth in the coming days. I think we should merge this PR in the meantime to unblock CI.
2022-05-20 05:02:13 +00:00
Michael Sproul
8fa032c8ae Run fork choice before block proposal (#3168)
## Issue Addressed

Upcoming spec change https://github.com/ethereum/consensus-specs/pull/2878

## Proposed Changes

1. Run fork choice at the start of every slot, and wait for this run to complete before proposing a block.
2. As an optimisation, also run fork choice 3/4 of the way through the slot (at 9s), _dequeueing attestations for the next slot_.
3. Remove the fork choice run from the state advance timer that occurred before advancing the state.

## Additional Info

### Block Proposal Accuracy

This change makes us more likely to propose on top of the correct head in the presence of re-orgs with proposer boost in play. The main scenario that this change is designed to address is described in the linked spec issue.

### Attestation Accuracy

This change _also_ makes us more likely to attest to the correct head. Currently in the case of a skipped slot at `slot` we only run fork choice 9s into `slot - 1`. This means the attestations from `slot - 1` aren't taken into consideration, and any boost applied to the block from `slot - 1` is not removed (it should be). In the language of the linked spec issue, this means we are liable to attest to C, even when the majority voting weight has already caused a re-org to B.

### Why remove the call before the state advance?

If we've run fork choice at the start of the slot then it has already dequeued all the attestations from the previous slot, which are the only ones eligible to influence the head in the current slot. Running fork choice again is unnecessary (unless we run it for the next slot and try to pre-empt a re-org, but I don't currently think this is a great idea).

### Performance

Based on Prater testing this adds about 5-25ms of runtime to block proposal times, which are 500-1000ms on average (and spike to 5s+ sometimes due to state handling issues 😢 ). I believe this is a small enough penalty to enable it by default, with the option to disable it via the new flag `--fork-choice-before-proposal-timeout 0`. Upcoming work on block packing and state representation will also reduce block production times in general, while removing the spikes.

### Implementation

Fork choice gets invoked at the start of the slot via the `per_slot_task` function called from the slot timer. It then uses a condition variable to signal to block production that fork choice has been updated. This is a bit funky, but it seems to work. One downside of the timer-based approach is that it doesn't happen automatically in most of the tests. The test added by this PR has to trigger the run manually.
2022-05-20 05:02:11 +00:00
Mac L
def9bc660e Remove DB migrations for legacy database schemas (#3181)
## Proposed Changes

Remove support for DB migrations that support upgrading from schema's below version 5. This is mostly for cosmetic/code quality reasons as in most circumstances upgrading from versions of Lighthouse this old will almost always require a re-sync.

## Additional Info

The minimum supported database schema is now version 5.
2022-05-17 04:54:39 +00:00
Paul Hauner
db8a6f81ea Prevent attestation to future blocks from early attester cache (#3183)
## Issue Addressed

N/A

## Proposed Changes

Prevents the early attester cache from producing attestations to future blocks. This bug could result in a missed head vote if the BN was requested to produce an attestation for an earlier slot than the head block during the (usually) short window of time between verifying a block and setting it as the head.

This bug was noticed in an [Antithesis](https://andreagrieser.com/) test and diagnosed by @realbigsean. 

## Additional Info

NA
2022-05-17 01:51:25 +00:00
Paul Hauner
38050fa460 Allow TaskExecutor to be used in async tests (#3178)
# Description

Since the `TaskExecutor` currently requires a `Weak<Runtime>`, it's impossible to use it in an async test where the `Runtime` is created outside our scope. Whilst we *could* create a new `Runtime` instance inside the async test, dropping that `Runtime` would cause a panic (you can't drop a `Runtime` in an async context).

To address this issue, this PR creates the `enum Handle`, which supports either:

- A `Weak<Runtime>` (for use in our production code)
- A `Handle` to a runtime (for use in testing)

In theory, there should be no change to the behaviour of our production code (beyond some slightly different descriptions in HTTP 500 errors), or even our tests. If there is no change, you might ask *"why bother?"*. There are two PRs (#3070 and #3175) that are waiting on these fixes to introduce some new tests. Since we've added the EL to the `BeaconChain` (for the merge), we are now doing more async stuff in tests.

I've also added a `RuntimeExecutor` to the `BeaconChainTestHarness`. Whilst that's not immediately useful, it will become useful in the near future with all the new async testing.
2022-05-16 08:35:59 +00:00
Michael Sproul
bcdd960ab1 Separate execution payloads in the DB (#3157)
## Proposed Changes

Reduce post-merge disk usage by not storing finalized execution payloads in Lighthouse's database.

⚠️ **This is achieved in a backwards-incompatible way for networks that have already merged** ⚠️. Kiln users and shadow fork enjoyers will be unable to downgrade after running the code from this PR. The upgrade migration may take several minutes to run, and can't be aborted after it begins.

The main changes are:

- New column in the database called `ExecPayload`, keyed by beacon block root.
- The `BeaconBlock` column now stores blinded blocks only.
- Lots of places that previously used full blocks now use blinded blocks, e.g. analytics APIs, block replay in the DB, etc.
- On finalization:
    - `prune_abanonded_forks` deletes non-canonical payloads whilst deleting non-canonical blocks.
    - `migrate_db` deletes finalized canonical payloads whilst deleting finalized states.
- Conversions between blinded and full blocks are implemented in a compositional way, duplicating some work from Sean's PR #3134.
- The execution layer has a new `get_payload_by_block_hash` method that reconstructs a payload using the EE's `eth_getBlockByHash` call.
   - I've tested manually that it works on Kiln, using Geth and Nethermind.
   - This isn't necessarily the most efficient method, and new engine APIs are being discussed to improve this: https://github.com/ethereum/execution-apis/pull/146.
   - We're depending on the `ethers` master branch, due to lots of recent changes. We're also using a workaround for https://github.com/gakonst/ethers-rs/issues/1134.
- Payload reconstruction is used in the HTTP API via `BeaconChain::get_block`, which is now `async`. Due to the `async` fn, the `blocking_json` wrapper has been removed.
- Payload reconstruction is used in network RPC to serve blocks-by-{root,range} responses. Here the `async` adjustment is messier, although I think I've managed to come up with a reasonable compromise: the handlers take the `SendOnDrop` by value so that they can drop it on _task completion_ (after the `fn` returns). Still, this is introducing disk reads onto core executor threads, which may have a negative performance impact (thoughts appreciated).

## Additional Info

- [x] For performance it would be great to remove the cloning of full blocks when converting them to blinded blocks to write to disk. I'm going to experiment with a `put_block` API that takes the block by value, breaks it into a blinded block and a payload, stores the blinded block, and then re-assembles the full block for the caller.
- [x] We should measure the latency of blocks-by-root and blocks-by-range responses.
- [x] We should add integration tests that stress the payload reconstruction (basic tests done, issue for more extensive tests: https://github.com/sigp/lighthouse/issues/3159)
- [x] We should (manually) test the schema v9 migration from several prior versions, particularly as blocks have changed on disk and some migrations rely on being able to load blocks.

Co-authored-by: Paul Hauner <paul@paulhauner.com>
2022-05-12 00:42:17 +00:00
Michael Sproul
ae47a93c42 Don't panic in forkchoiceUpdated handler (#3165)
## Issue Addressed

Fix a panic due to misuse of the Tokio executor when processing a forkchoiceUpdated response. We were previously calling `process_invalid_execution_payload` from the async function `update_execution_engine_forkchoice_async`, which resulted in a panic because `process_invalid_execution_payload` contains a call to fork choice, which ultimately calls `block_on`.

An example backtrace can be found here: https://gist.github.com/michaelsproul/ac5da03e203d6ffac672423eaf52fb20

## Proposed Changes

Wrap the call to `process_invalid_execution_payload` in a `spawn_blocking` so that `block_on` is no longer called from an async context.

## Additional Info

- I've been thinking about how to catch bugs like this with static analysis (a new Clippy lint).
- The payload validation tests have been re-worked to support distinct responses from the mock EE for newPayload and forkchoiceUpdated. Three new tests have been added covering the `Invalid`, `InvalidBlockHash` and `InvalidTerminalBlock` cases.
- I think we need a bunch more tests of different legal and illegal variations
2022-05-04 23:30:34 +00:00
Paul Hauner
b49b4291a3 Disallow attesting to optimistic head (#3140)
## Issue Addressed

NA

## Proposed Changes

Disallow the production of attestations and retrieval of unaggregated attestations when they reference an optimistic head. Add tests to this end.

I also moved `BeaconChain::produce_unaggregated_attestation_for_block` to the `BeaconChainHarness`. It was only being used during tests, so it's nice to stop pretending it's production code. I also needed something that could produce attestations to optimistic blocks in order to simulate scenarios where the justified checkpoint is determined invalid (if no one would attest to an optimistic block, we could never justify it and then flip it to invalid).

## Additional Info

- ~~Blocked on #3126~~
2022-04-13 03:54:42 +00:00
Paul Hauner
c8edeaff29 Don't log crits for missing EE before Bellatrix (#3150)
## Issue Addressed

NA

## Proposed Changes

Fixes an issue introduced in #3088 which was causing unnecessary `crit` logs on networks without Bellatrix enabled.

## Additional Info

NA
2022-04-11 23:14:47 +00:00
ethDreamer
22002a4e68 Transition Block Proposer Preparation (#3088)
## Issue Addressed

- #3058 

Co-authored-by: Paul Hauner <paul@paulhauner.com>
2022-04-07 14:03:34 +00:00
Paul Hauner
8a40763183 Ensure VALID response from fcU updates protoarray (#3126)
## Issue Addressed

NA

## Proposed Changes

Ensures that a `VALID` response from a `forkchoiceUpdate` call will update that block in `ProtoArray`.

I also had to modify the mock execution engine so it wouldn't return valid when all payloads were supposed to be some other static value.

## Additional Info

NA
2022-04-05 20:58:17 +00:00
Paul Hauner
42cdaf5840 Add tests for importing blocks on invalid parents (#3123)
## Issue Addressed

NA

## Proposed Changes

- Adds more checks to prevent importing blocks atop parent with invalid execution payloads.
- Adds a test for these conditions.

## Additional Info

NA
2022-04-05 20:58:16 +00:00
Michael Sproul
bac7c3fa54 v2.2.0 (#3139)
## Proposed Changes

Cut release v2.2.0 including proposer boost.

## Additional Info

I also updated the clippy lints for the imminent release of Rust 1.60, although LH v2.2.0 will continue to compile using Rust 1.58 (our MSRV).
2022-04-05 02:53:09 +00:00
Michael Sproul
4d0122444b Update and consolidate dependencies (#3136)
## Proposed Changes

I did some gardening 🌳 in our dependency tree:

- Remove duplicate versions of `warp` (git vs patch)
- Remove duplicate versions of lots of small deps: `cpufeatures`, `ethabi`, `ethereum-types`, `bitvec`, `nix`, `libsecp256k1`.
- Update MDBX (should resolve #3028). I tested and Lighthouse compiles on Windows 11 now.
- Restore `psutil` back to upstream
- Make some progress updating everything to rand 0.8. There are a few crates stuck on 0.7.

Hopefully this puts us on a better footing for future `cargo audit` issues, and improves compile times slightly.

## Additional Info

Some crates are held back by issues with `zeroize`. libp2p-noise depends on [`chacha20poly1305`](https://crates.io/crates/chacha20poly1305) which depends on zeroize < v1.5, and we can only have one version of zeroize because it's post 1.0 (see https://github.com/rust-lang/cargo/issues/6584). The latest version of `zeroize` is v1.5.4, which is used by the new versions of many other crates (e.g. `num-bigint-dig`). Once a new version of chacha20poly1305 is released we can update libp2p-noise and upgrade everything to the latest `zeroize` version.

I've also opened a PR to `blst` related to zeroize: https://github.com/supranational/blst/pull/111
2022-04-04 00:26:16 +00:00
Michael Sproul
41e7a07c51 Add lighthouse db command (#3129)
## Proposed Changes

Add a `lighthouse db` command with three initial subcommands:

- `lighthouse db version`: print the database schema version.
- `lighthouse db migrate --to N`: manually upgrade (or downgrade!) the database to a different version.
- `lighthouse db inspect --column C`: log the key and size in bytes of every value in a given `DBColumn`.

This PR lays the groundwork for other changes, namely:

- Mark's fast-deposit sync (https://github.com/sigp/lighthouse/pull/2915), for which I think we should implement a database downgrade (from v9 to v8).
- My `tree-states` work, which already implements a downgrade (v10 to v8).
- Standalone purge commands like `lighthouse db purge-dht` per https://github.com/sigp/lighthouse/issues/2824.

## Additional Info

I updated the `strum` crate to 0.24.0, which necessitated some changes in the network code to remove calls to deprecated methods.

Thanks to @winksaville for the motivation, and implementation work that I used as a source of inspiration (https://github.com/sigp/lighthouse/pull/2685).
2022-04-01 00:58:59 +00:00
realbigsean
ea783360d3 Kiln mev boost (#3062)
## Issue Addressed

MEV boost compatibility

## Proposed Changes

See #2987

## Additional Info

This is blocked on the stabilization of a couple specs, [here](https://github.com/ethereum/beacon-APIs/pull/194) and [here](https://github.com/flashbots/mev-boost/pull/20).

Additional TODO's and outstanding questions

- [ ] MEV boost JWT Auth
- [ ] Will `builder_proposeBlindedBlock` return the revealed payload for the BN to propogate
- [ ] Should we remove `private-tx-proposals` flag and communicate BN <> VC with blinded blocks by default once these endpoints enter the beacon-API's repo? This simplifies merge transition logic. 

Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: realbigsean <sean@sigmaprime.io>
2022-03-31 07:52:23 +00:00
Michael Sproul
6efd95496b Optionally skip RANDAO verification during block production (#3116)
## Proposed Changes

Allow Lighthouse to speculatively create blocks via the `/eth/v1/validators/blocks` endpoint by optionally skipping the RANDAO verification that we introduced in #2740. When `verify_randao=false` is passed as a query parameter the `randao_reveal` is not required to be present, and if present will only be lightly checked (must be a valid BLS sig). If `verify_randao` is omitted it defaults to true and Lighthouse behaves exactly as it did previously, hence this PR is backwards-compatible.

I'd like to get this change into `unstable` pretty soon as I've got 3 projects building on top of it:

- [`blockdreamer`](https://github.com/michaelsproul/blockdreamer), which mocks block production every slot in order to fingerprint clients
- analysis of Lighthouse's block packing _optimality_, which uses `blockdreamer` to extract interesting instances of the attestation packing problem
- analysis of Lighthouse's block packing _performance_ (as in speed) on the `tree-states` branch

## Additional Info

Having tested `blockdreamer` with Prysm, Nimbus and Teku I noticed that none of them verify the randao signature on `/eth/v1/validator/blocks`. I plan to open a PR to the `beacon-APIs` repo anyway so that this parameter can be standardised in case the other clients add RANDAO verification by default in future.
2022-03-28 07:14:13 +00:00
Lucas Manuel
adca0efc64 feat: Update ASCII art (#3113)
## Issue Addressed

No issue, just updating merge ASCII art.

## Proposed Changes

Updating ASCII art for merge.

## Additional Info

Please provide any additional information. For example, future considerations
or information useful for reviewers.
2022-03-24 00:04:50 +00:00
ethDreamer
af50130e21 Add Proposer Cache Pruning & POS Activated Banner (#3109)
## Issue Addressed

The proposers cache wasn't being pruned. Also didn't have a celebratory banner for the merge 😄

## Banner
![pos_log_panda](https://user-images.githubusercontent.com/37123614/159528545-3aa54cbd-9362-49b1-830c-f4402f6ac341.png)
2022-03-22 21:33:38 +00:00
Paul Hauner
e4fa7d906f Fix post-merge checkpoint sync (#3065)
## Issue Addressed

This address an issue which was preventing checkpoint-sync.

When the node starts from checkpoint sync, the head block and the finalized block are the same value. We did not respect this when sending a `forkchoiceUpdated` (fcU) call to the EL and were expecting fork choice to hold the *finalized ancestor of the head* and returning an error when it didn't.

This PR uses *only fork choice* for sending fcU updates. This is actually quite nice and avoids some atomicity issues between `chain.canonical_head` and `chain.fork_choice`. Now, whenever `chain.fork_choice.get_head` returns a value we also cache the values required for the next fcU call.

## TODO

- [x] ~~Blocked on #3043~~
- [x] Ensure there isn't a warn message at startup.
2022-03-10 06:05:24 +00:00
Paul Hauner
267d8babc8 Prepare proposer (#3043)
## Issue Addressed

Resolves #2936

## Proposed Changes

Adds functionality for calling [`validator/prepare_beacon_proposer`](https://ethereum.github.io/beacon-APIs/?urls.primaryName=dev#/Validator/prepareBeaconProposer) in advance.

There is a `BeaconChain::prepare_beacon_proposer` method which, which called, computes the proposer for the next slot. If that proposer has been registered via the `validator/prepare_beacon_proposer` API method, then the `beacon_chain.execution_layer` will be provided the `PayloadAttributes` for us in all future forkchoiceUpdated calls. An artificial forkchoiceUpdated call will be created 4s before each slot, when the head updates and when a validator updates their information.

Additionally, I added strict ordering for calls from the `BeaconChain` to the `ExecutionLayer`. I'm not certain the `ExecutionLayer` will always maintain this ordering, but it's a good start to have consistency from the `BeaconChain`. There are some deadlock opportunities introduced, they are documented in the code.

## Additional Info

- ~~Blocked on #2837~~

Co-authored-by: realbigsean <seananderson33@GMAIL.com>
2022-03-09 00:42:05 +00:00
Pawan Dhananjay
381d0ece3c auth for engine api (#3046)
## Issue Addressed

Resolves #3015 

## Proposed Changes

Add JWT token based authentication to engine api requests. The jwt secret key is read from the provided file and is used to sign tokens that are used for authenticated communication with the EL node.

- [x] Interop with geth (synced `merge-devnet-4` with the `merge-kiln-v2` branch on geth)
- [x] Interop with other EL clients (nethermind on `merge-devnet-4`)
- [x] ~Implement `zeroize` for jwt secrets~
- [x] Add auth server tests with `mock_execution_layer`
- [x] Get auth working with the `execution_engine_integration` tests






Co-authored-by: Paul Hauner <paul@paulhauner.com>
2022-03-08 06:46:24 +00:00
Akihito Nakano
4186d117af Replace OpenOptions::new with File::options to be readable (#3059)
## Issue Addressed

Closes #3049 

This PR updates widely but this replace is safe as `File::options()` is equivelent to `OpenOptions::new()`.
ref: https://doc.rust-lang.org/stable/src/std/fs.rs.html#378-380
2022-03-07 06:30:18 +00:00
Michael Sproul
1829250ee4 Ignore attestations to finalized blocks (don't reject) (#3052)
## Issue Addressed

Addresses spec changes from v1.1.0:

- https://github.com/ethereum/consensus-specs/pull/2830
- https://github.com/ethereum/consensus-specs/pull/2846

## Proposed Changes

* Downgrade the REJECT for `HeadBlockFinalized` to an IGNORE. This applies to both unaggregated and aggregated attestations.

## Additional Info

I thought about also changing the penalty for `UnknownTargetRoot` but I don't think it's reachable in practice.
2022-03-04 00:41:22 +00:00
Paul Hauner
aea43b626b Rename random to prev_randao (#3040)
## Issue Addressed

As discussed on last-night's consensus call, the testnets next week will target the [Kiln Spec v2](https://hackmd.io/@n0ble/kiln-spec).

Presently, we support Kiln V1. V2 is backwards compatible, except for renaming `random` to `prev_randao` in:

- https://github.com/ethereum/execution-apis/pull/180
- https://github.com/ethereum/consensus-specs/pull/2835

With this PR we'll no longer be compatible with the existing Kintsugi and Kiln testnets, however we'll be ready for the testnets next week. I raised this breaking change in the call last night, we are all keen to move forward and break things.

We now target the [`merge-kiln-v2`](https://github.com/MariusVanDerWijden/go-ethereum/tree/merge-kiln-v2) branch for interop with Geth. This required adding the `--http.aauthport` to the tester to avoid a port conflict at startup.

### Changes to exec integration tests

There's some change in the `merge-kiln-v2` version of Geth that means it can't compile on a vanilla Github runner. Bumping the `go` version on the runner solved this issue.

Whilst addressing this, I refactored the `testing/execution_integration` crate to be a *binary* rather than a *library* with tests. This means that we don't need to run the `build.rs` and build Geth whenever someone runs `make lint` or `make test-release`. This is nice for everyday users, but it's also nice for CI so that we can have a specific runner for these tests and we don't need to ensure *all* runners support everything required to build all execution clients.

## More Info

- [x] ~~EF tests are failing since the rename has broken some tests that reference the old field name. I have been told there will be new tests released in the coming days (25/02/22 or 26/02/22).~~
2022-03-03 02:10:57 +00:00
Paul Hauner
b6493d5e24 Enforce Optimistic Sync Conditions & CLI Tests (v2) (#3050)
## Description

This PR adds a single, trivial commit (f5d2b27d78349d5a675a2615eba42cc9ae708094) atop #2986 to resolve a tests compile error. The original author (@ethDreamer) is AFK so I'm getting this one merged ☺️ 

Please see #2986 for more information about the other, significant changes in this PR.


Co-authored-by: Mark Mackey <mark@sigmaprime.io>
Co-authored-by: ethDreamer <37123614+ethDreamer@users.noreply.github.com>
2022-03-01 22:56:47 +00:00
Paul Hauner
27e83b888c Retrospective invalidation of exec. payloads for opt. sync (#2837)
## Issue Addressed

NA

## Proposed Changes

Adds the functionality to allow blocks to be validated/invalidated after their import as per the [optimistic sync spec](https://github.com/ethereum/consensus-specs/blob/dev/sync/optimistic.md#how-to-optimistically-import-blocks). This means:

- Updating `ProtoArray` to allow flipping the `execution_status` of ancestors/descendants based on payload validity updates.
- Creating separation between `execution_layer` and the `beacon_chain` by creating a `PayloadStatus` struct.
- Refactoring how the `execution_layer` selects a `PayloadStatus` from the multiple statuses returned from multiple EEs.
- Adding testing framework for optimistic imports.
- Add `ExecutionBlockHash(Hash256)` new-type struct to avoid confusion between *beacon block roots* and *execution payload hashes*.
- Add `merge` to [`FORKS`](c3a793fd73/Makefile (L17)) in the `Makefile` to ensure we test the beacon chain with merge settings.
    - Fix some tests here that were failing due to a missing execution layer.

## TODO

- [ ] Balance tests

Co-authored-by: Mark Mackey <mark@sigmaprime.io>
2022-02-28 22:07:48 +00:00
Michael Sproul
5e1f8a8480 Update to Rust 1.59 and 2021 edition (#3038)
## Proposed Changes

Lots of lint updates related to `flat_map`, `unwrap_or_else` and string patterns. I did a little more creative refactoring in the op pool, but otherwise followed Clippy's suggestions.

## Additional Info

We need this PR to unblock CI.
2022-02-25 00:10:17 +00:00
Paul Hauner
0a6a8ea3b0 Engine API v1.0.0.alpha.6 + interop tests (#3024)
## Issue Addressed

NA

## Proposed Changes

This PR extends #3018 to address my review comments there and add automated integration tests with Geth (and other implementations, in the future).

I've also de-duplicated the "unused port" logic by creating an  `common/unused_port` crate.

## Additional Info

I'm not sure if we want to merge this PR, or update #3018 and merge that. I don't mind, I'm primarily opening this PR to make sure CI works.


Co-authored-by: Mark Mackey <mark@sigmaprime.io>
2022-02-17 21:47:06 +00:00
Paul Hauner
2f8531dc60 Update to consensus-specs v1.1.9 (#3016)
## Issue Addressed

Closes #3014

## Proposed Changes

- Rename `receipt_root` to `receipts_root`
- Rename `execute_payload` to `notify_new_payload`
   - This is slightly weird since we modify everything except the actual HTTP call to the engine API. That change is expected to be implemented in #2985 (cc @ethDreamer)
- Enable "random" tests for Bellatrix.

## Notes

This will break *partially* compatibility with Kintusgi testnets in order to gain compatibility with [Kiln](https://hackmd.io/@n0ble/kiln-spec) testnets. I think it will only break the BN APIs due to the `receipts_root` change, however it might have some other effects too.

Co-authored-by: Michael Sproul <micsproul@gmail.com>
2022-02-14 23:57:23 +00:00
Philipp K
5388183884 Allow per validator fee recipient via flag or file in validator client (similar to graffiti / graffiti-file) (#2924)
## Issue Addressed

#2883 

## Proposed Changes

* Added `suggested-fee-recipient` & `suggested-fee-recipient-file` flags to validator client (similar to graffiti / graffiti-file implementation).
* Added proposer preparation service to VC, which sends the fee-recipient of all known validators to the BN via [/eth/v1/validator/prepare_beacon_proposer](https://github.com/ethereum/beacon-APIs/pull/178) api once per slot
* Added [/eth/v1/validator/prepare_beacon_proposer](https://github.com/ethereum/beacon-APIs/pull/178) api endpoint and preparation data caching
* Added cleanup routine to remove cached proposer preparations when not updated for 2 epochs

## Additional Info

Changed the Implementation following the discussion in #2883.



Co-authored-by: pk910 <philipp@pk910.de>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Co-authored-by: Philipp K <philipp@pk910.de>
2022-02-08 19:52:20 +00:00
Michael Sproul
99d2c33387 Avoid looking up pre-finalization blocks (#2909)
## Issue Addressed

This PR fixes the unnecessary `WARN Single block lookup failed` messages described here:

https://github.com/sigp/lighthouse/pull/2866#issuecomment-1008442640

## Proposed Changes

Add a new cache to the `BeaconChain` that tracks the block roots of blocks from before finalization. These could be blocks from the canonical chain (which might need to be read from disk), or old pre-finalization blocks that have been forked out.

The cache also stores a set of block roots for in-progress single block lookups, which duplicates some of the information from sync's `single_block_lookups` hashmap:

a836e180f9/beacon_node/network/src/sync/manager.rs (L192-L196)

On a live node you can confirm that the cache is working by grepping logs for the message: `Rejected attestation to finalized block`.
2022-01-27 22:58:32 +00:00
Michael Sproul
e70daaa3b6 Implement API for block rewards (#2628)
## Proposed Changes

Add an API endpoint for retrieving detailed information about block rewards.

For information on usage see [the docs](https://github.com/sigp/lighthouse/blob/block-rewards-api/book/src/api-lighthouse.md#lighthouseblock_rewards), and the source.
2022-01-27 01:06:02 +00:00
Rishi Kumar Ray
f0f327af0c Removed all disable_forks (#2925)
#2923 

Which issue # does this PR address?
There's a redundant field on the BeaconChain called disabled_forks that was once part of our fork-aware networking (#953) but which is no longer used and could be deleted. so Removed all references to disabled_forks so that the code compiles and git grep disabled_forks returns no results.

## Proposed Changes

Please list or describe the changes introduced by this PR.
Removed all references of disabled_forks


Co-authored-by: Divma <26765164+divagant-martian@users.noreply.github.com>
2022-01-20 09:14:26 +00:00
Michael Sproul
ef7351ddfe Update to spec v1.1.8 (#2893)
## Proposed Changes

Change the canonical fork name for the merge to Bellatrix. Keep other merge naming the same to avoid churn.

I've also fixed and enabled the `fork` and `transition` tests for Bellatrix, and the v1.1.7 fork choice tests.

Additionally, the `BellatrixPreset` has been added with tests. It gets served via the `/config/spec` API endpoint along with the other presets.
2022-01-19 00:24:19 +00:00
Paul Hauner
c11253a82f Remove grandparents from snapshot cache (#2917)
## Issue Addressed

NA

## Proposed Changes

In https://github.com/sigp/lighthouse/pull/2832 we made some changes to the `SnapshotCache` to help deal with the one-block reorgs seen on mainnet (and testnets).

I believe the change in #2832 is good and we should keep it, but I think that in its present form it is causing the `SnapshotCache` to hold onto states that it doesn't need anymore. For example, a skip slot will result in one more `BeaconSnapshot` being stored in the cache.

This PR adds a new type of pruning that happens after a block is inserted to the cache. We will remove any snapshot from the cache that is a *grandparent* of the block being imported. Since we know the grandparent has two valid blocks built atop it, it is not at risk from a one-block re-org. 

## Additional Info

NA
2022-01-14 07:20:55 +00:00
Paul Hauner
aaa5344eab Add peer score adjustment msgs (#2901)
## Issue Addressed

N/A

## Proposed Changes

This PR adds the `msg` field to `Peer score adjusted` log messages. These `msg` fields help identify *why* a peer was banned.

Example:

```
Jan 11 04:18:48.096 DEBG Peer score adjusted                     score: -100.00, peer_id: 16Uiu2HAmQskxKWWGYfginwZ51n5uDbhvjHYnvASK7PZ5gBdLmzWj, msg: attn_unknown_head, service: libp2p
Jan 11 04:18:48.096 DEBG Peer score adjusted                     score: -27.86, peer_id: 16Uiu2HAmA7cCb3MemVDbK3MHZoSb7VN3cFUG3vuSZgnGesuVhPDE, msg: sync_past_slot, service: libp2p
Jan 11 04:18:48.096 DEBG Peer score adjusted                     score: -100.00, peer_id: 16Uiu2HAmQskxKWWGYfginwZ51n5uDbhvjHYnvASK7PZ5gBdLmzWj, msg: attn_unknown_head, service: libp2p
Jan 11 04:18:48.096 DEBG Peer score adjusted                     score: -28.86, peer_id: 16Uiu2HAmA7cCb3MemVDbK3MHZoSb7VN3cFUG3vuSZgnGesuVhPDE, msg: sync_past_slot, service: libp2p
Jan 11 04:18:48.096 DEBG Peer score adjusted                     score: -29.86, peer_id: 16Uiu2HAmA7cCb3MemVDbK3MHZoSb7VN3cFUG3vuSZgnGesuVhPDE, msg: sync_past_slot, service: libp2p
```

There is also a `libp2p_report_peer_msgs_total` metrics which allows us to see count of reports per `msg` tag. 

## Additional Info

NA
2022-01-12 05:32:14 +00:00
Paul Hauner
61f60bdf03 Avoid penalizing peers for delays during processing (#2894)
## Issue Addressed

NA

## Proposed Changes

We have observed occasions were under-resourced nodes will receive messages that were valid *at the time*, but later become invalidated due to long waits for a `BeaconProcessor` worker.

In this PR, we will check to see if the message was valid *at the time of receipt*. If it was initially valid but invalid now, we just ignore the message without penalizing the peer.

## Additional Info

NA
2022-01-12 02:36:24 +00:00
Paul Hauner
02e2fd2fb8 Add early attester cache (#2872)
## Issue Addressed

NA

## Proposed Changes

Introduces a cache to attestation to produce atop blocks which will become the head, but are not fully imported (e.g., not inserted into the database).

Whilst attesting to a block before it's imported is rather easy, if we're going to produce that attestation then we also need to be able to:

1. Verify that attestation.
1. Respond to RPC requests for the `beacon_block_root`.

Attestation verification (1) is *partially* covered. Since we prime the shuffling cache before we insert the block into the early attester cache, we should be fine for all typical use-cases. However, it is possible that the cache is washed out before we've managed to insert the state into the database and then attestation verification will fail with a "missing beacon state"-type error.

Providing the block via RPC (2) is also partially covered, since we'll check the database *and* the early attester cache when responding a blocks-by-root request. However, we'll still omit the block from blocks-by-range requests (until the block lands in the DB). I *think* this is fine, since there's no guarantee that we return all blocks for those responses.

Another important consideration is whether or not the *parent* of the early attester block is available in the databse. If it were not, we might fail to respond to blocks-by-root request that are iterating backwards to collect a chain of blocks. I argue that *we will always have the parent of the early attester block in the database.* This is because we are holding the fork-choice write-lock when inserting the block into the early attester cache and we do not drop that until the block is in the database.
2022-01-11 01:35:55 +00:00
Paul Hauner
f6b5b1a8be Use ? debug formatting for block roots in beacon_chain.rs (#2890)
## Issue Addressed

NA

## Proposed Changes

Ensures full roots are printed, rather than shortened versions like `0x935b…d376`.

For example, it would be nice if we could do API queries based upon the roots shown in the `Beacon chain re-org` event:

```
Jan 05 12:36:52.224 WARN Beacon chain re-org                     reorg_distance: 2, new_slot: 2073184, new_head: 0x8a97…2dec, new_head_parent: 0xa985…7688, previous_slot: 2073183, previous_head: 0x935b…d376, service: beacon
Jan 05 13:35:05.832 WARN Beacon chain re-org                     reorg_distance: 1, new_slot: 2073475, new_head: 0x9207…c6b9, new_head_parent: 0xb2ce…839b, previous_slot: 2073474, previous_head: 0x8066…92f7, service: beacon
```

## Additional Info

We should eventually fix this project-wide, however this is a short-term patch.
2022-01-06 05:16:50 +00:00
Michael Sproul
fac117667b Update to superstruct v0.4.1 (#2886)
## Proposed Changes

Update `superstruct` to bring in @realbigsean's fixes necessary for MEV-compatible private beacon block types (a la #2795).

The refactoring is due to another change in superstruct that allows partial getters to be auto-generated.
2022-01-06 03:14:58 +00:00
Pawan Dhananjay
a0c5701e36 Only import blocks with valid execution payloads (#2869)
## Issue Addressed

N/A

## Proposed Changes

We are currently treating errors from the EL on `engine_executePayload` as `PayloadVerificationStatus::NotVerified`. This adds the block as a candidate head block in fork choice even if the EL explicitly rejected the block as invalid. 

`PayloadVerificationStatus::NotVerified` should be only returned when the EL explicitly returns "syncing" imo. This PR propagates an error instead of returning `NotVerified` on EL all EL errors.
2021-12-22 08:15:37 +00:00
Age Manning
81c667b58e Additional networking metrics (#2549)
Adds additional metrics for network monitoring and evaluation.


Co-authored-by: Mark Mackey <mark@sigmaprime.io>
2021-12-22 06:17:14 +00:00
Michael Sproul
3b61ac9cbf Optimise slasher DB layout and switch to MDBX (#2776)
## Issue Addressed

Closes #2286
Closes #2538
Closes #2342

## Proposed Changes

Part II of major slasher optimisations after #2767

These changes will be backwards-incompatible due to the move to MDBX (and the schema change) 😱 

* [x] Shrink attester keys from 16 bytes to 7 bytes.
* [x] Shrink attester records from 64 bytes to 6 bytes.
* [x] Separate `DiskConfig` from regular `Config`.
* [x] Add configuration for the LRU cache size.
* [x] Add a "migration" that deletes any legacy LMDB database.
2021-12-21 08:23:17 +00:00
Michael Sproul
a290a3c537 Add configurable block replayer (#2863)
## Issue Addressed

Successor to #2431

## Proposed Changes

* Add a `BlockReplayer` struct to abstract over the intricacies of calling `per_slot_processing` and `per_block_processing` while avoiding unnecessary tree hashing.
* Add a variant of the forwards state root iterator that does not require an `end_state`.
* Use the `BlockReplayer` when reconstructing states in the database. Use the efficient forwards iterator for frozen states.
* Refactor the iterators to remove `Arc<HotColdDB>` (this seems to be neater than making _everything_ an `Arc<HotColdDB>` as I did in #2431).

Supplying the state roots allow us to avoid building a tree hash cache at all when reconstructing historic states, which saves around 1 second flat (regardless of `slots-per-restore-point`). This is a small percentage of worst-case state load times with 200K validators and SPRP=2048 (~15s vs ~16s) but a significant speed-up for more frequent restore points: state loads with SPRP=32 should be now consistently <500ms instead of 1.5s (a ~3x speedup).

## Additional Info

Required by https://github.com/sigp/lighthouse/pull/2628
2021-12-21 06:30:52 +00:00
Michael Sproul
a43d5e161f Optimise balances cache in case of skipped slots (#2849)
## Proposed Changes

Remove the `is_first_block_in_epoch` logic from the balances cache update logic, as it was incorrect in the case of skipped slots. The updated code is simpler because regardless of whether the block is the first in the epoch we can check if an entry for the epoch boundary root already exists in the cache, and update the cache accordingly.

Additionally, to assist with flip-flopping justified epochs, move to cloning the balance cache rather than moving it. This should still be very fast in practice because the balances cache is a ~1.6MB `Vec`, and this operation is expected to only occur infrequently.
2021-12-13 23:35:57 +00:00