Commit Graph

65 Commits

Author SHA1 Message Date
Age Manning
7456e1e8fa Separate BN for block proposals (#4182)
It is a well-known fact that IP addresses for beacon nodes used by specific validators can be de-anonymized. There is an assumed risk that a malicious user may attempt to DOS validators when producing blocks to prevent chain growth/liveness.

Although there are a number of ideas put forward to address this, there a few simple approaches we can take to mitigate this risk.

Currently, a Lighthouse user is able to set a number of beacon-nodes that their validator client can connect to. If one beacon node is taken offline, it can fallback to another. Different beacon nodes can use VPNs or rotate IPs in order to mask their IPs.

This PR provides an additional setup option which further mitigates attacks of this kind.

This PR introduces a CLI flag --proposer-only to the beacon node. Setting this flag will configure the beacon node to run with minimal peers and crucially will not subscribe to subnets or sync committees. Therefore nodes of this kind should not be identified as nodes connected to validators of any kind.

It also introduces a CLI flag --proposer-nodes to the validator client. Users can then provide a number of beacon nodes (which may or may not run the --proposer-only flag) that the Validator client will use for block production and propagation only. If these nodes fail, the validator client will fallback to the default list of beacon nodes.

Users are then able to set up a number of beacon nodes dedicated to block proposals (which are unlikely to be identified as validator nodes) and point their validator clients to produce blocks on these nodes and attest on other beacon nodes. An attack attempting to prevent liveness on the eth2 network would then need to preemptively find and attack the proposer nodes which is significantly more difficult than the default setup.

This is a follow on from: #3328 

Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
2023-04-26 01:12:36 +00:00
Divma
e190ebb8a0 Support for Ipv6 (#4046)
## Issue Addressed
Add support for ipv6 and dual stack in lighthouse. 

## Proposed Changes
From an user perspective, now setting an ipv6 address, optionally configuring the ports should feel exactly the same as using an ipv4 address. If listening over both ipv4 and ipv6 then the user needs to:
- use the `--listen-address` two times (ipv4 and ipv6 addresses)
- `--port6` becomes then required
- `--discovery-port6` can now be used to additionally configure the ipv6 udp port

### Rough list of code changes
- Discovery:
  - Table filter and ip mode set to match the listening config. 
  - Ipv6 address, tcp port and udp port set in the ENR builder
  - Reported addresses now check which tcp port to give to libp2p
- LH Network Service:
  - Can listen over Ipv6, Ipv4, or both. This uses two sockets. Using mapped addresses is disabled from libp2p and it's the most compatible option.
- NetworkGlobals:
  - No longer stores udp port since was not used at all. Instead, stores the Ipv4 and Ipv6 TCP ports.
- NetworkConfig:
  - Update names to make it clear that previous udp and tcp ports in ENR were Ipv4
  - Add fields to configure Ipv6 udp and tcp ports in the ENR
  - Include advertised enr Ipv6 address.
  - Add type to model Listening address that's either Ipv4, Ipv6 or both. A listening address includes the ip, udp port and tcp port.
- UPnP:
  - Kept only for ipv4
- Cli flags:
  - `--listen-addresses` now can take up to two values
  - `--port` will apply to ipv4 or ipv6 if only one listening address is given. If two listening addresses are given it will apply only to Ipv4.
  - `--port6` New flag required when listening over ipv4 and ipv6 that applies exclusively to Ipv6.
  - `--discovery-port` will now apply to ipv4 and ipv6 if only one listening address is given.
  - `--discovery-port6` New flag to configure the individual udp port of ipv6 if listening over both ipv4 and ipv6.
  - `--enr-udp-port` Updated docs to specify that it only applies to ipv4. This is an old behaviour.
  - `--enr-udp6-port` Added to configure the enr udp6 field.
  - `--enr-tcp-port` Updated docs to specify that it only applies to ipv4. This is an old behaviour.
  - `--enr-tcp6-port` Added to configure the enr tcp6 field.
  - `--enr-addresses` now can take two values.
  - `--enr-match` updated behaviour.
- Common:
  - rename `unused_port` functions to specify that they are over ipv4.
  - add functions to get unused ports over ipv6.
- Testing binaries
  - Updated code to reflect network config changes and unused_port changes.

## Additional Info

TODOs:
- use two sockets in discovery. I'll get back to this and it's on https://github.com/sigp/discv5/pull/160
- lcli allow listening over two sockets in generate_bootnodes_enr
- add at least one smoke flag for ipv6 (I have tested this and works for me)
- update the book
2023-03-14 01:13:34 +00:00
Michael Sproul
90cef1db86 Appease Clippy 1.68 and refactor http_api (#4068)
## Proposed Changes

Two tiny updates to satisfy Clippy 1.68

Plus refactoring of the `http_api` into less complex types so the compiler can chew and digest them more easily.

Co-authored-by: Michael Sproul <michael@sigmaprime.io>
2023-03-13 01:40:03 +00:00
Michael Sproul
bb0e99c097 Merge remote-tracking branch 'origin/unstable' into capella 2023-01-21 10:37:26 +11:00
Mac L
6ac1c5b439 Add CLI flag to specify the format of logs written to the logfile (#3839)
## Proposed Changes

Decouple the stdout and logfile formats by adding the `--logfile-format` CLI flag.
This behaves identically to the existing `--log-format` flag, but instead will only affect the logs written to the logfile.
The `--log-format` flag will no longer have any effect on the contents of the logfile.

## Additional Info
This avoids being a breaking change by causing `logfile-format` to default to the value of `--log-format` if it is not provided. 
This means that users who were previously relying on being able to use a JSON formatted logfile will be able to continue to use `--log-format JSON`. 

Users who want to use JSON on stdout and default logs in the logfile, will need to pass the following flags: `--log-format JSON --logfile-format DEFAULT`
2023-01-16 03:42:10 +00:00
Mark Mackey
8a04c3428e Merged with unstable 2022-11-30 17:29:10 -06:00
Mac L
969ff240cd Add CLI flag to opt in to world-readable log files (#3747)
## Issue Addressed

#3732

## Proposed Changes

Add a CLI flag to allow users to opt out of the restrictive permissions of the log files.

## Additional Info

This is not recommended for most users. The log files can contain sensitive information such as validator indices, public keys and API tokens (see #2438). However some users using a multi-user setup may find this helpful if they understand the risks involved.
2022-11-25 07:57:11 +00:00
realbigsean
8656d23327
merge with unstable 2022-11-01 13:18:00 -04:00
realbigsean
137f230344
Capella eip 4844 cleanup (#3652)
* add capella gossip boiler plate

* get everything compiling

Co-authored-by: realbigsean <sean@sigmaprime.io
Co-authored-by: Mark Mackey <mark@sigmaprime.io>

* small cleanup

* small cleanup

* cargo fix + some test cleanup

* improve block production

* add fixme for potential panic

Co-authored-by: Mark Mackey <mark@sigmaprime.io>
2022-10-26 15:15:26 -04:00
GeemoCandama
6a92bf70e4 CLI tests for logging flags (#3609)
## Issue Addressed
Adding CLI tests for logging flags: log-color and disable-log-timestamp
Which issue # does this PR address?
#3588 
## Proposed Changes
Add CLI tests for logging flags as described in #3588 
Please list or describe the changes introduced by this PR.
Added logger_config to client::Config as suggested. Implemented Default for LoggerConfig based on what was being done elsewhere in the repo. Created 2 tests for each flag addressed.
## Additional Info

Please provide any additional information. For example, future considerations
or information useful for reviewers.
2022-10-04 08:33:40 +00:00
Pawan Dhananjay
8728c40102 Remove fallback support from eth1 service (#3594)
## Issue Addressed

N/A

## Proposed Changes

With https://github.com/sigp/lighthouse/pull/3214 we made it such that you can either have 1 auth endpoint or multiple non auth endpoints. Now that we are post merge on all networks (testnets and mainnet), we cannot progress a chain without a dedicated auth execution layer connection so there is no point in having a non-auth eth1-endpoint for syncing deposit cache. 

This code removes all fallback related code in the eth1 service. We still keep the single non-auth endpoint since it's useful for testing.

## Additional Info

This removes all eth1 fallback related metrics that were relevant for the monitoring service, so we might need to change the api upstream.
2022-10-04 08:33:39 +00:00
Ramana Kumar
76ba0a1aaf Add disable-log-timestamp flag (#3101) (#3586)
## Issues Addressed

Closes https://github.com/sigp/lighthouse/issues/3101

## Proposed Changes

Add global flag to suppress timestamps in the terminal logger.
2022-09-23 03:52:41 +00:00
Alexander Cyon
419c53bf24 Add flag 'log-color' preserving color of log redirected to file. (#3538)
Add flag 'log-color' which preserves colors of log when stdout is redirected to a file.

This is my first lighthouse PR, please let me know if I'm not following contribution guidelines, I welcome meta-feeback (feedback on git commit messages, git branch naming, and the contents of the description of this PR.)

## Issue Addressed

Solves https://github.com/sigp/lighthouse/issues/3527

## Proposed Changes

Adding a flag which enables log color preserving when stdout is redirected to a file.

### Usage
Below I demonstrate current behaviour (without using the new flag) and the new behaviur (when using new flag).

In the screenshot below, I have to panes, one on top running `lighthouse` which redirects to file `~/Desktop/test.log` and one pane in the bottom which runs `tail -f ~/Desktop/test.log`.

#### Current behaviour
```sh
lighthouse --network prater vc |& tee -a ~/Desktop/test.log
```

**Result is no colors**

<img width="1624" alt="current" src="https://user-images.githubusercontent.com/864410/188258226-bfcf8271-4c9e-474c-848e-ac92a60df25c.png">


#### New behaviour
```sh
lighthouse --network prater vc --log-color |& tee -a ~/Desktop/test.log
```

**Result is colors** 🔴🟢🔵🟡

<img width="1624" alt="new" src="https://user-images.githubusercontent.com/864410/188258223-7d9ecf09-92c8-4cba-8f24-bd4d88fc0353.png">

## Additional Info

I chose American spelling of "color" instead of Brittish "colour' since that was aligned with `slog`'s API - method`force_color()`, let me know if you prefer spelling "colour" instead. I also chose to let it be an arg not taking any argument, just like `logfile-compress` flag, rather than having to write `--log-color true`.
2022-09-06 05:58:27 +00:00
Pawan Dhananjay
f9b9658711 Add merge support to simulator (#3292)
## Issue Addressed

N/A

## Proposed Changes

Make simulator merge compatible. Adds a `--post_merge` flag to the eth1 simulator that enables a ttd and simulates the merge transition. Uses the `MockServer` in the execution layer test utils to simulate a dummy execution node.

Adds the merge transition simulation to CI.
2022-07-18 23:15:40 +00:00
Pawan Dhananjay
5de00b7ee8 Unify execution layer endpoints (#3214)
## Issue Addressed

Resolves #3069 

## Proposed Changes

Unify the `eth1-endpoints` and `execution-endpoints` flags in a backwards compatible way as described in https://github.com/sigp/lighthouse/issues/3069#issuecomment-1134219221

Users have 2 options:
1. Use multiple non auth execution endpoints for deposit processing pre-merge
2. Use a single jwt authenticated execution endpoint for both execution layer and deposit processing post merge

Related https://github.com/sigp/lighthouse/issues/3118

To enable jwt authenticated deposit processing, this PR removes the calls to `net_version` as the `net` namespace is not exposed in the auth server in execution clients. 
Moving away from using `networkId` is a good step in my opinion as it doesn't provide us with any added guarantees over `chainId`. See https://github.com/ethereum/consensus-specs/issues/2163 and https://github.com/sigp/lighthouse/issues/2115


Co-authored-by: Paul Hauner <paul@paulhauner.com>
2022-06-29 09:07:09 +00:00
Michael Sproul
6eaeaa542f Fix Rust 1.61 clippy lints (#3192)
## Issue Addressed

This fixes the low-hanging Clippy lints introduced in Rust 1.61 (due any hour now). It _ignores_ one lint, because fixing it requires a structural refactor of the validator client that needs to be done delicately. I've started on that refactor and will create another PR that can be reviewed in more depth in the coming days. I think we should merge this PR in the meantime to unblock CI.
2022-05-20 05:02:13 +00:00
Pawan Dhananjay
fff4dd6311 Fix rpc limits version 2 (#3146)
## Issue Addressed

N/A

## Proposed Changes

https://github.com/sigp/lighthouse/pull/3133 changed the rpc type limits to be fork aware i.e. if our current fork based on wall clock slot is Altair, then we apply only altair rpc type limits. This is a bug because phase0 blocks can still be sent over rpc and phase 0 block minimum size is smaller than altair block minimum size. So a phase0 block with `size < SIGNED_BEACON_BLOCK_ALTAIR_MIN` will return an `InvalidData` error as it doesn't pass the rpc types bound check.

This error can be seen when we try syncing pre-altair blocks with size smaller than `SIGNED_BEACON_BLOCK_ALTAIR_MIN`.

This PR fixes the issue by also accounting for forks earlier than current_fork in the rpc limits calculation in the  `rpc_block_limits_by_fork` function. I decided to hardcode the limits in the function because that seemed simpler than calculating previous forks based on current fork and doing a min across forks. Adding a new fork variant is simple and can the limits can be easily checked in a review. 

Adds unit tests and modifies the syncing simulator to check the syncing from across fork boundaries. 
The syncing simulator's block 1 would always be of phase 0 minimum size (404 bytes) which is smaller than altair min block size (since block 1 contains no attestations).
2022-04-07 23:45:38 +00:00
Michael Sproul
4d0122444b Update and consolidate dependencies (#3136)
## Proposed Changes

I did some gardening 🌳 in our dependency tree:

- Remove duplicate versions of `warp` (git vs patch)
- Remove duplicate versions of lots of small deps: `cpufeatures`, `ethabi`, `ethereum-types`, `bitvec`, `nix`, `libsecp256k1`.
- Update MDBX (should resolve #3028). I tested and Lighthouse compiles on Windows 11 now.
- Restore `psutil` back to upstream
- Make some progress updating everything to rand 0.8. There are a few crates stuck on 0.7.

Hopefully this puts us on a better footing for future `cargo audit` issues, and improves compile times slightly.

## Additional Info

Some crates are held back by issues with `zeroize`. libp2p-noise depends on [`chacha20poly1305`](https://crates.io/crates/chacha20poly1305) which depends on zeroize < v1.5, and we can only have one version of zeroize because it's post 1.0 (see https://github.com/rust-lang/cargo/issues/6584). The latest version of `zeroize` is v1.5.4, which is used by the new versions of many other crates (e.g. `num-bigint-dig`). Once a new version of chacha20poly1305 is released we can update libp2p-noise and upgrade everything to the latest `zeroize` version.

I've also opened a PR to `blst` related to zeroize: https://github.com/supranational/blst/pull/111
2022-04-04 00:26:16 +00:00
realbigsean
ae5b141dc4 Updates to tests and local testnet for Ganache 7 (#3056)
## Issue Addressed

#2961

## Proposed Changes

-- update `--chainId` -> `--chain.chainId`
-- remove `--keepAliveTimeout`
-- fix log to listen for
-- rename `ganache-cli` to `ganache` everywhere


Co-authored-by: realbigsean <sean@sigmaprime.io>
2022-03-20 22:48:14 +00:00
Age Manning
f3c1dde898 Filter non global ips from discovery (#3023)
## Issue Addressed

#3006 

## Proposed Changes

This PR changes the default behaviour of lighthouse to ignore discovered IPs that are not globally routable. It adds a CLI flag, --enable-local-discovery to permit the non-global IPs in discovery.

NOTE: We should take care in merging this as I will break current set-ups that rely on local IP discovery. I made this the non-default behaviour because we dont really want to be wasting resources attempting to connect to non-routable addresses and we dont want to propagate these to others (on the chance we can connect to one of these local nodes), improving discoveries efficiency.
2022-03-02 03:14:27 +00:00
Michael Sproul
5e1f8a8480 Update to Rust 1.59 and 2021 edition (#3038)
## Proposed Changes

Lots of lint updates related to `flat_map`, `unwrap_or_else` and string patterns. I did a little more creative refactoring in the op pool, but otherwise followed Clippy's suggestions.

## Additional Info

We need this PR to unblock CI.
2022-02-25 00:10:17 +00:00
Michael Sproul
fac117667b Update to superstruct v0.4.1 (#2886)
## Proposed Changes

Update `superstruct` to bring in @realbigsean's fixes necessary for MEV-compatible private beacon block types (a la #2795).

The refactoring is due to another change in superstruct that allows partial getters to be auto-generated.
2022-01-06 03:14:58 +00:00
Mac L
fe75a0a9a1 Add background file logging (#2762)
## Issue Addressed

Closes #1996 

## Proposed Changes

Run a second `Logger` via `sloggers` which logs to a file in the background with:
- separate `debug-level` for background and terminal logging
- the ability to limit log size
- rotation through a customizable number of log files
- an option to compress old log files (`.gz` format)

Add the following new CLI flags:
- `--logfile-debug-level`: The debug level of the log files
- `--logfile-max-size`: The maximum size of each log file
- `--logfile-max-number`: The number of old log files to store
- `--logfile-compress`: Whether to compress old log files

By default background logging uses the `debug` log level and saves logfiles to:
- Beacon Node:  `$HOME/.lighthouse/$network/beacon/logs/beacon.log`
- Validator Client:  `$HOME/.lighthouse/$network/validators/logs/validator.log`

Or, when using the `--datadir` flag:
`$datadir/beacon/logs/beacon.log` and `$datadir/validators/logs/validator.log`

Once rotated, old logs are stored like so: `beacon.log.1`, `beacon.log.2` etc. 
> Note: `beacon.log.1` is always newer than `beacon.log.2`.

## Additional Info

Currently the default value of `--logfile-max-size` is 200 (MB) and `--logfile-max-number` is 5.
This means that the maximum storage space that the logs will take up by default is 1.2GB. 
(200MB x 5 from old log files + <200MB the current logfile being written to)
Happy to adjust these default values to whatever people think is appropriate. 

It's also worth noting that when logging to a file, we lose our custom `slog` formatting. This means the logfile logs look like this:
```
Oct 27 16:02:50.305 INFO Lighthouse started, version: Lighthouse/v2.0.1-8edd9d4+, module: lighthouse:413
Oct 27 16:02:50.305 INFO Configured for network, name: prater, module: lighthouse:414
```
2021-11-30 03:25:32 +00:00
Age Manning
e519af9012 Update Lighthouse Dependencies (#2818)
## Issue Addressed

Updates lighthouse dependencies to resolve audit issues in out-dated deps.
2021-11-18 05:08:42 +00:00
Pawan Dhananjay
58b04acf28 Fix simulator issues (#2802)
## Issue Addressed

Resolves #2775 

## Proposed Changes

1. Reduces the target_peers to stop recursive discovery requests.
2. Changes the eth1 `auto_update_interval` config parameter to be equal to the eth1 block time in the simulator. Without this, the eth1 `latest_cached_block` wouldn't be updated for some slots around `eth1_voting_period` boundaries which would lead to the eth1 cache falling out of sync. This is what caused the `Syncing eth1 block cache` and `No valid eth1_data votes` logs.
2021-11-15 06:38:29 +00:00
Michael Sproul
aad397f00a Resolve Rust 1.56 lints and warnings (#2728)
## Issue Addressed

When compiling with Rust 1.56.0 the compiler generates 3 instances of this warning:

```
warning: trailing semicolon in macro used in expression position
   --> common/eth2_network_config/src/lib.rs:181:24
    |
181 |                     })?;
    |                        ^
...
195 |         let deposit_contract_deploy_block = load_from_file!(DEPLOY_BLOCK_FILE);
    |                                             ---------------------------------- in this macro invocation
    |
    = note: `#[warn(semicolon_in_expressions_from_macros)]` on by default
    = warning: this was previously accepted by the compiler but is being phased out; it will become a hard error in a future release!
    = note: for more information, see issue #79813 <https://github.com/rust-lang/rust/issues/79813>
    = note: this warning originates in the macro `load_from_file` (in Nightly builds, run with -Z macro-backtrace for more info)
```

This warning is completely harmless, but will be visible to users compiling Lighthouse v2.0.1 (or earlier) with Rust 1.56.0 (to be released October 21st). It is **completely safe** to ignore this warning, it's just a superficial change to Rust's syntax.

## Proposed Changes

This PR removes the semi-colon as recommended, and fixes the new Clippy lints from 1.56.0
2021-10-19 00:30:42 +00:00
Squirrel
db4d72c4f1 Remove unused deps (#2592)
Found some deps you're possibly not using.

Please shout if you think they are indeed still needed.
2021-09-30 04:31:42 +00:00
Pawan Dhananjay
ac274221c5 Run altair specific checks with the simulator (#2556)
## Issue Addressed

N/A

## Proposed Changes

Set a valid fork epoch in the simulator and run checks on 
1. If all nodes transitioned at the fork
2. If all altair block sync aggregates are full
2021-09-03 02:41:11 +00:00
Michael Sproul
c0a2f501d9 Upgrade dependencies (#2513)
## Proposed Changes

* Consolidate Tokio versions: everything now uses the latest v1.10.0, no more `tokio-compat`.
* Many semver-compatible changes via `cargo update`. Notably this upgrades from the yanked v0.8.0 version of crossbeam-deque which is present in v1.5.0-rc.0
* Many semver incompatible upgrades via `cargo upgrades` and `cargo upgrade --workspace pkg_name`. Notable ommissions:
    - Prometheus, to be handled separately: https://github.com/sigp/lighthouse/issues/2485
    - `rand`, `rand_xorshift`: the libsecp256k1 package requires 0.7.x, so we'll stick with that for now
    - `ethereum-types` is pinned at 0.11.0 because that's what `web3` is using and it seems nice to have just a single version
    
## Additional Info

We still have two versions of `libp2p-core` due to `discv5` depending on the v0.29.0 release rather than `master`. AFAIK it should be OK to release in this state (cc @AgeManning )
2021-08-17 01:00:24 +00:00
realbigsean
c5786a8821 Doppelganger detection (#2230)
## Issue Addressed

Resolves #2069 

## Proposed Changes

- Adds a `--doppelganger-detection` flag
- Adds a `lighthouse/seen_validators` endpoint, which will make it so the lighthouse VC is not interopable with other client beacon nodes if the `--doppelganger-detection` flag is used, but hopefully this will become standardized. Relevant Eth2 API repo issue: https://github.com/ethereum/eth2.0-APIs/issues/64
- If the `--doppelganger-detection` flag is used, the VC will wait until the beacon node is synced, and then wait an additional 2 epochs. The reason for this is to make sure the beacon node is able to subscribe to the subnets our validators should be attesting on. I think an alternative would be to have the beacon node subscribe to all subnets for 2+ epochs on startup by default.

## Additional Info

I'd like to add tests and would appreciate feedback. 

TODO:  handle validators started via the API, potentially make this default behavior

Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
2021-07-31 03:50:52 +00:00
Age Manning
c1d2e35c9e
Bleeding edge discovery (#2435)
* Update discovery banning logic and tokio

* Update to latest discovery

* Shift to latest discovery

* Fmt
2021-07-15 16:43:17 +10:00
Michael Sproul
b4689e20c6 Altair consensus changes and refactors (#2279)
## Proposed Changes

Implement the consensus changes necessary for the upcoming Altair hard fork.

## Additional Info

This is quite a heavy refactor, with pivotal types like the `BeaconState` and `BeaconBlock` changing from structs to enums. This ripples through the whole codebase with field accesses changing to methods, e.g. `state.slot` => `state.slot()`.


Co-authored-by: realbigsean <seananderson33@gmail.com>
2021-07-09 06:15:32 +00:00
realbigsean
b84ff9f793 rust 1.53.0 updates (#2411)
## Issue Addressed

`make lint` failing on rust 1.53.0.

## Proposed Changes

1.53.0 updates

## Additional Info

I haven't figure out why yet, we were now hitting the recursion limit in a few crates. So I had to add `#![recursion_limit = "256"]` in a few places


Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
2021-06-18 05:58:01 +00:00
Mac L
4cc613d644 Add SensitiveUrl to redact user secrets from endpoints (#2326)
## Issue Addressed

#2276 

## Proposed Changes

Add the `SensitiveUrl` struct which wraps `Url` and implements custom `Display` and `Debug` traits to redact user secrets from being logged in eth1 endpoints, beacon node endpoints and metrics.

## Additional Info

This also includes a small rewrite of the eth1 crate to make requests using `Url` instead of `&str`. 
Some error messages have also been changed to remove `Url` data.
2021-05-04 01:59:51 +00:00
Paul Hauner
b34a79dc0b v1.2.1 (#2263)
## Issue Addressed

NA

## Proposed Changes

- Bump version.
- Add some new ENR for Prater
    - Afri: https://github.com/eth2-clients/eth2-testnets/pull/42
    - Prysm: https://github.com/eth2-clients/eth2-testnets/pull/43
- Apply the fixes from #2181 to the no-eth1-sim to try fix CI issues. 

## Additional Info

NA
2021-03-18 04:20:46 +00:00
realbigsean
e20f64b21a Update to tokio 1.1 (#2172)
## Issue Addressed

resolves #2129
resolves #2099 
addresses some of #1712
unblocks #2076
unblocks #2153 

## Proposed Changes

- Updates all the dependencies mentioned in #2129, except for web3. They haven't merged their tokio 1.0 update because they are waiting on some dependencies of their own. Since we only use web3 in tests, I think updating it in a separate issue is fine. If they are able to merge soon though, I can update in this PR. 

- Updates `tokio_util` to 0.6.2 and `bytes` to 1.0.1.

- We haven't made a discv5 release since merging tokio 1.0 updates so I'm using a commit rather than release atm. **Edit:** I think we should merge an update of `tokio_util` to 0.6.2 into discv5 before this release because it has panic fixes in `DelayQueue`  --> PR in discv5:  https://github.com/sigp/discv5/pull/58

## Additional Info

tokio 1.0 changes that required some changes in lighthouse:

- `interval.next().await.is_some()` -> `interval.tick().await`
- `sleep` future is now `!Unpin` -> https://github.com/tokio-rs/tokio/issues/3028
- `try_recv` has been temporarily removed from `mpsc` -> https://github.com/tokio-rs/tokio/issues/3350
- stream features have moved to `tokio-stream` and `broadcast::Receiver::into_stream()` has been temporarily removed -> `https://github.com/tokio-rs/tokio/issues/2870
- I've copied over the `BroadcastStream` wrapper from this PR, but can update to use `tokio-stream` once it's merged https://github.com/tokio-rs/tokio/pull/3384

Co-authored-by: realbigsean <seananderson33@gmail.com>
2021-02-10 23:29:49 +00:00
Pawan Dhananjay
420c2d28f8 Fix simulator failed runs (#2181)
## Issue Addressed

N/A

## Proposed Changes

Another attempt at fixing simulator issues for `eth1-sim`. 
The `LocalValidatorClient` here blocks till genesis has occurred. 
e4b62139d7/testing/simulator/src/local_network.rs (L145-L150)

Due to this, only the first validator(validator_0) starts before genesis. The remaining 3 vc's in the simulation start only after genesis. This was probably causing issues with missing the duties and eventually the proposal for slot 1.

This PR spawns each `LocalValidatorClient` in it's own tokio task to allow the remaining validators to start before genesis.

## Additional Info

Please provide any additional information. For example, future considerations
or information useful for reviewers.
2021-02-01 03:31:12 +00:00
Paul Hauner
d9f940613f Represent slots in secs instead of millisecs (#2163)
## Issue Addressed

NA

## Proposed Changes

Copied from #2083, changes the config milliseconds_per_slot to seconds_per_slot to avoid errors when slot duration is not a multiple of a second. To avoid deserializing old serialized data (with milliseconds instead of seconds) the Serialize and Deserialize derive got removed from the Spec struct (isn't currently used anyway).

This PR replaces #2083 for the purpose of fixing a merge conflict without requiring the input of @blacktemplar.

## Additional Info

NA


Co-authored-by: blacktemplar <blacktemplar@a1.net>
2021-01-19 09:39:51 +00:00
Akihito Nakano
e5b1a37110 [simulator] Fix race condition when creating LocalBeaconNode (#2137)
## Issue Addressed

We have a race condition when counting the number of beacon nodes. The user could end up seeing a duplicated service name (node_N).

## Proposed Changes

I have updated to acquire write lock before counting the number of beacon nodes.
2021-01-14 00:04:18 +00:00
Paul Hauner
a62dc65ca4 BN Fallback v2 (#2080)
## Issue Addressed

- Resolves #1883

## Proposed Changes

This follows on from @blacktemplar's work in #2018.

- Allows the VC to connect to multiple BN for redundancy.
  - Update the simulator so some nodes always need to rely on their fallback.
- Adds some extra deprecation warnings for `--eth1-endpoint`
- Pass `SignatureBytes` as a reference instead of by value.

## Additional Info

NA

Co-authored-by: blacktemplar <blacktemplar@a1.net>
2020-12-18 09:17:03 +00:00
blacktemplar
3fcc517993 Fix Syncing Simulator (#2049)
## Issue Addressed

NA

## Proposed Changes

Fixes problems with slot times below 1 second which got revealed by running the syncing simulator with the default speedup time.
2020-12-16 05:37:38 +00:00
blacktemplar
a28e8decbf update dependencies (#2032)
## Issue Addressed

NA

## Proposed Changes

Updates out of date dependencies.

## Additional Info

See also https://github.com/sigp/lighthouse/issues/1712 for a list of dependencies that are still out of date and the resasons.
2020-12-07 08:20:33 +00:00
Age Manning
a567f788bd Upgrade to tokio 0.3 (#1839)
## Description

This PR updates Lighthouse to tokio 0.3. It includes a number of dependency updates and some structural changes as to how we create and spawn tasks.

This also brings with it a number of various improvements:

- Discv5 update
- Libp2p update
- Fix for recompilation issues
- Improved UPnP port mapping handling
- Futures dependency update
- Log downgrade to traces for rejecting peers when we've reached our max



Co-authored-by: blacktemplar <blacktemplar@a1.net>
2020-11-28 05:30:57 +00:00
blacktemplar
38b15deccb Fallback nodes for eth1 access (#1918)
## Issue Addressed

part of  #1883

## Proposed Changes

Adds a new cli argument `--eth1-endpoints` that can be used instead of `--eth1-endpoint` to specify a comma-separated list of endpoints. If the first endpoint returns an error for some request the other endpoints are tried in the given order.

## Additional Info

Currently if the first endpoint fails the fallbacks are used silently (except for `try_fallback_test_endpoint` that is used in `do_update` which logs a `WARN` for each endpoint that is not reachable). A question is if we should add more logs so that the user gets warned if his main endpoint is for example just slow and sometimes hits timeouts.
2020-11-27 08:37:44 +00:00
Pawan Dhananjay
280334b1b0 Validate eth1 chain id (#1877)
## Issue Addressed

Resolves #1815 

## Proposed Changes

Adds extra validation for eth1 chain id apart from the existing check for eth1 network id.
2020-11-16 23:10:42 +00:00
blacktemplar
7404f1ce54 Gossipsub scoring (#1668)
## Issue Addressed

#1606 

## Proposed Changes

Uses dynamic gossipsub scoring parameters depending on the number of active validators as specified in https://gist.github.com/blacktemplar/5c1862cb3f0e32a1a7fb0b25e79e6e2c.

## Additional Info

Although the parameters got tested on Medalla, extensive testing using simulations on larger networks is still to be done and we expect that we need to change the parameters, although this might only affect constants within the dynamic parameter framework.
2020-11-12 01:48:28 +00:00
Pawan Dhananjay
97be2ca295 Simulator and attestation service fixes (#1747)
## Issue Addressed

#1729 #1730 

Which issue # does this PR address?

## Proposed Changes

1. Fixes a bug in the simulator where nodes can't find each other due to 0 udp ports in their enr.
2. Fixes bugs in attestation service where we are unsubscribing from a subnet prematurely.

More testing is needed for attestation service fixes.
2020-10-15 07:11:31 +00:00
Michael Sproul
b0833033b7 Strict slashing protection by default (#1750)
## Proposed Changes

Replace `--strict-slashing-protection` by `--init-slashing-protection` and remove mentions of `--auto-register`
2020-10-09 02:05:32 +00:00
Herman Junge
a886afd3ca Improve command help (#1740)
A little help for the future generations.
2020-10-07 00:31:19 +00:00
Paul Hauner
ee7c8a0b7e Update external deps (#1711)
## Issue Addressed

- Resolves #1706 

## Proposed Changes

Updates dependencies across the workspace. Any crate that was not able to be brought to the latest version is listed in #1712.

## Additional Info

NA
2020-10-05 08:22:19 +00:00