## Issue Addressed
N/A
## Proposed Changes
- Removing a bunch of unnecessary references
- Updated `Error::VariantError` to `Error::Variant`
- There were additional enum variant lints that I ignored, because I thought our variant names were fine
- removed `MonitoredValidator`'s `pubkey` field, because I couldn't find it used anywhere. It looks like we just use the string version of the pubkey (the `id` field) if there is no index
## Additional Info
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
#2454
## Proposed Changes
Adds the `--http-address` flag to allow the user to use custom HTTP addresses. This can be helpful for certain Docker setups.
Since using custom HTTP addresses is unsafe due to the server being unencrypted, `--unencrypted-http-transport` was also added as a safety flag and must be used in tandem with `--http-address`. This is to ensure the user is aware of the risks associated with using non-local HTTP addresses.
## Issue Addressed
Resolves#2313
## Proposed Changes
Provide `BeaconNodeHttpClient` with a dedicated `Timeouts` struct.
This will allow granular adjustment of the timeout duration for different calls made from the VC to the BN. These can either be a constant value, or as a ratio of the slot duration.
Improve timeout performance by using these adjusted timeout duration's only whenever a fallback endpoint is available.
Add a CLI flag called `use-long-timeouts` to revert to the old behavior.
## Additional Info
Additionally set the default `BeaconNodeHttpClient` timeouts to the be the slot duration of the network, rather than a constant 12 seconds. This will allow it to adjust to different network specifications.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Proposed Changes
Implement the consensus changes necessary for the upcoming Altair hard fork.
## Additional Info
This is quite a heavy refactor, with pivotal types like the `BeaconState` and `BeaconBlock` changing from structs to enums. This ripples through the whole codebase with field accesses changing to methods, e.g. `state.slot` => `state.slot()`.
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
`make lint` failing on rust 1.53.0.
## Proposed Changes
1.53.0 updates
## Additional Info
I haven't figure out why yet, we were now hitting the recursion limit in a few crates. So I had to add `#![recursion_limit = "256"]` in a few places
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Windows incompatibility.
## Proposed Changes
On windows, lighthouse needs to default to STDIN as tty doesn't exist. Also Windows uses ACLs for file permissions. So to mirror chmod 600, we will remove every entry in a file's ACL and add only a single SID that is an alias for the file owner.
Beyond that, there were several changes made to different unit tests because windows has slightly different error messages as well as frustrating nuances around killing a process :/
## Additional Info
Tested on my Windows VM and it appears to work, also compiled & tested on Linux with these changes. Permissions look correct on both platforms now. Just waiting for my validator to activate on Prater so I can test running full validator client on windows.
Co-authored-by: ethDreamer <37123614+ethDreamer@users.noreply.github.com>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
The latest version of Rust has new clippy rules & the codebase isn't up to date with them.
## Proposed Changes
Small formatting changes that clippy tells me are functionally equivalent
## Issue Addressed
#2276
## Proposed Changes
Add the `SensitiveUrl` struct which wraps `Url` and implements custom `Display` and `Debug` traits to redact user secrets from being logged in eth1 endpoints, beacon node endpoints and metrics.
## Additional Info
This also includes a small rewrite of the eth1 crate to make requests using `Url` instead of `&str`.
Some error messages have also been changed to remove `Url` data.
## Issue Addressed
NA
## Proposed Changes
Fixes a compile error when using the `milagro` feature. I can't see any need to use the specific BLST object here. @pawanjay176 can you please confirm?
## Additional Info
NA
## Issue Addressed
Closes#2274
## Proposed Changes
* Modify the `YamlConfig` to collect unknown fields into an `extra_fields` map, instead of failing hard.
* Log a debug message if there are extra fields returned to the VC from one of its BNs.
This restores Lighthouse's compatibility with Teku beacon nodes (and therefore Infura)
## Issue Addressed
Closes#2052
## Proposed Changes
- Refactor the attester/proposer duties endpoints in the BN
- Performance improvements
- Fixes some potential inconsistencies with the dependent root fields.
- Removes `http_api::beacon_proposer_cache` and just uses the one on the `BeaconChain` instead.
- Move the code for the proposer/attester duties endpoints into separate files, for readability.
- Refactor the `DutiesService` in the VC
- Required to reduce the delay on broadcasting new blocks.
- Gets rid of the `ValidatorDuty` shim struct that came about when we adopted the standard API.
- Separate block/attestation duty tasks so that they don't block each other when one is slow.
- In the VC, use `PublicKeyBytes` to represent validators instead of `PublicKey`. `PublicKey` is a legit crypto object whilst `PublicKeyBytes` is just a byte-array, it's much faster to clone/hash `PublicKeyBytes` and this change has had a significant impact on runtimes.
- Unfortunately this has created lots of dust changes.
- In the BN, store `PublicKeyBytes` in the `beacon_proposer_cache` and allow access to them. The HTTP API always sends `PublicKeyBytes` over the wire and the conversion from `PublicKey` -> `PublickeyBytes` is non-trivial, especially when queries have 100s/1000s of validators (like Pyrmont).
- Add the `state_processing::state_advance` mod which dedups a lot of the "apply `n` skip slots to the state" code.
- This also fixes a bug with some functions which were failing to include a state root as per [this comment](072695284f/consensus/state_processing/src/state_advance.rs (L69-L74)). I couldn't find any instance of this bug that resulted in anything more severe than keying a shuffling cache by the wrong block root.
- Swap the VC block service to use `mpsc` from `tokio` instead of `futures`. This is consistent with the rest of the code base.
~~This PR *reduces* the size of the codebase 🎉~~ It *used* to reduce the size of the code base before I added more comments.
## Observations on Prymont
- Proposer duties times down from peaks of 450ms to consistent <1ms.
- Current epoch attester duties times down from >1s peaks to a consistent 20-30ms.
- Block production down from +600ms to 100-200ms.
## Additional Info
- ~~Blocked on #2241~~
- ~~Blocked on #2234~~
## TODO
- [x] ~~Refactor this into some smaller PRs?~~ Leaving this as-is for now.
- [x] Address `per_slot_processing` roots.
- [x] Investigate slow next epoch times. Not getting added to cache on block processing?
- [x] Consider [this](072695284f/beacon_node/store/src/hot_cold_store.rs (L811-L812)) in the scenario of replacing the state roots
Co-authored-by: pawan <pawandhananjay@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Resolves#1944
## Proposed Changes
Adds a "graffiti" key to the `validator_definitions.yml`. Setting the key will override anything passed through the validator `--graffiti` flag.
Returns an error if the value for the graffiti key is > 32 bytes instead of silently truncating.
## Proposed Changes
Prune the slashing protection database so that it doesn't exhibit unbounded growth. Prune by dropping attestations and blocks from more than 512 epochs ago, relying on the guards that prevent signing messages with slots or epochs less than the minimum recorded in the DB.
The pruning process is potentially time consuming, so it's scheduled to run only every 512 epochs, in the last 2/3rds of a slot. This gives it at least 4 seconds to run without impacting other signing, which I think should be sufficient. I've seen it run for several minutes (yikes!) on our Pyrmont nodes, but I suspect that 1) this will only occur on the first run when the database is still huge 2) no other production users will be impacted because they don't have enough validators per node.
Pruning also happens at start-up, as I figured this is a fairly infrequent event, and if a user is experiencing problems with the VC related to pruning, it's nice to be able to trigger it with a quick restart. Users are also conditioned to not mind missing a few attestations during a restart.
We need to include a note in the release notes that users may see the message `timed out waiting for connection` the first time they prune a huge database, but that this is totally fine and to be expected (the VC will miss those attestations in the meantime).
I'm also open to making this opt-in for now, although the sooner we get users doing it, the less painful it will be: prune early, prune often!
## Issue Addressed
NA
## Proposed Changes
Rust 1.50 has landed 🎉
The shiny new `clippy` peers down upon us mere mortals with disgust. Brutish peasants wrapping our `usize`s in superfluous `Option`s... tsk tsk.
I've performed the goat sacrifice and corrected our evil ways in this PR. Tonight we shall pray that Github Actions bestows the almighty green tick upon us.
## Additional Info
NA
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
resolves#2129resolves#2099
addresses some of #1712
unblocks #2076
unblocks #2153
## Proposed Changes
- Updates all the dependencies mentioned in #2129, except for web3. They haven't merged their tokio 1.0 update because they are waiting on some dependencies of their own. Since we only use web3 in tests, I think updating it in a separate issue is fine. If they are able to merge soon though, I can update in this PR.
- Updates `tokio_util` to 0.6.2 and `bytes` to 1.0.1.
- We haven't made a discv5 release since merging tokio 1.0 updates so I'm using a commit rather than release atm. **Edit:** I think we should merge an update of `tokio_util` to 0.6.2 into discv5 before this release because it has panic fixes in `DelayQueue` --> PR in discv5: https://github.com/sigp/discv5/pull/58
## Additional Info
tokio 1.0 changes that required some changes in lighthouse:
- `interval.next().await.is_some()` -> `interval.tick().await`
- `sleep` future is now `!Unpin` -> https://github.com/tokio-rs/tokio/issues/3028
- `try_recv` has been temporarily removed from `mpsc` -> https://github.com/tokio-rs/tokio/issues/3350
- stream features have moved to `tokio-stream` and `broadcast::Receiver::into_stream()` has been temporarily removed -> `https://github.com/tokio-rs/tokio/issues/2870
- I've copied over the `BroadcastStream` wrapper from this PR, but can update to use `tokio-stream` once it's merged https://github.com/tokio-rs/tokio/pull/3384
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
NA
## Proposed Changes
Copied from #2083, changes the config milliseconds_per_slot to seconds_per_slot to avoid errors when slot duration is not a multiple of a second. To avoid deserializing old serialized data (with milliseconds instead of seconds) the Serialize and Deserialize derive got removed from the Spec struct (isn't currently used anyway).
This PR replaces #2083 for the purpose of fixing a merge conflict without requiring the input of @blacktemplar.
## Additional Info
NA
Co-authored-by: blacktemplar <blacktemplar@a1.net>
## Issue Addressed
Related PR: https://github.com/sigp/lighthouse/pull/2137#issuecomment-754712492
The Fork is required for VC to perform signing. Currently, it is not guaranteed that the Fork has been obtained at the point of the signing as the Fork is obtained at after ForkService starts. We will see the [error](851a4dca3c/validator_client/src/validator_store.rs (L127)) if VC could not perform the signing due to the timing issue.
> Unable to get Fork for signing
## Proposed Changes
Obtain the Fork on `init_from_beacon_node` to fix the timing issue.
## Issue Addressed
`test_dht_persistence` failing
## Proposed Changes
Bind `NetworkService::start` to an underscore prefixed variable rather than `_`. `_` was causing it to be dropped immediately
This was failing 5/100 times before this update, but I haven't been able to get it to fail after updating it
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Fixes#2141
Remove [tempdir](https://docs.rs/tempdir/0.3.7/tempdir/) in favor of [tempfile](https://docs.rs/tempfile/3.1.0/tempfile/).
## Proposed Changes
`tempfile` has a slightly different api that makes creating temp folders with a name prefix a chore (`tempdir::TempDir::new("toto")` => `tempfile::Builder::new().prefix("toto").tempdir()`).
So I removed temp folder name prefix where I deemed it not useful.
Otherwise, the functionality is the same.
## Issue Addressed
NA
## Proposed Changes
- Removes a duplicated log in the fallback code for the VC.
- Updates the text in the remaining de-duped log.
## Additional Info
Example
```
Dec 23 05:19:54.003 WARN Beacon node is syncing endpoint: http://xxxx:5052/, head_slot: 88224, sync_distance: 161774
Dec 23 05:19:54.003 WARN Beacon node is not synced endpoint: http://xxxxx:5052/
```
## Issue Addressed
Fixes#2118
## Proposed Changes
Removes the default value in clap for `--beacon-nodes`.
This was causing issues with cli picking `--beacon-nodes` default even when not specified and overriding `--beacon-node`.
Seems like it was more evident with docker setups because it doesn't use the default `http://localhost:5052` option.
Edit: we already set the default to `http://localhost:5052` here so this shouldn't break any existing setups.
9ed65a64f8/validator_client/src/config.rs (L58)
## Additional info
Tested this with docker-compose and binaries. Works as expected in both cases.
## Issue Addressed
- Resolves#1883
## Proposed Changes
This follows on from @blacktemplar's work in #2018.
- Allows the VC to connect to multiple BN for redundancy.
- Update the simulator so some nodes always need to rely on their fallback.
- Adds some extra deprecation warnings for `--eth1-endpoint`
- Pass `SignatureBytes` as a reference instead of by value.
## Additional Info
NA
Co-authored-by: blacktemplar <blacktemplar@a1.net>
## Issue Addressed
#1992 and #1987, and also to be considered a continuation of #1751
## Proposed Changes
many changed files but most are renaming to align the code with the semantics of `--network`
- remove the `--network` default value (in clap) and instead set it after checking the `network` and `testnet-dir` flags
- move `eth2_testnet_config` crate to `eth2_network_config`
- move `Eth2TestnetConfig` to `Eth2NetworkConfig`
- move `DEFAULT_HARDCODED_TESTNET` to `DEFAULT_HARDCODED_NETWORK`
- `beacon_node`s `get_eth2_testnet_config` loads the `DEFAULT_HARDCODED_NETWORK` if there is no network nor testnet provided
- `boot_node`s config loads the config same as the `beacon_node`, it was using the configuration only for preconfigured networks (That code is ~1year old so I asume it was not intended)
- removed a one year old comment stating we should try to emulate `https://github.com/eth2-clients/eth2-testnets/tree/master/nimbus/testnet1` it looks outdated (?)
- remove `lighthouse`s `load_testnet_config` in favor of `get_eth2_network_config` to centralize that logic (It had differences)
- some spelling
## Additional Info
Both the command of #1992 and the scripts of #1987 seem to work fine, same as `bn` and `vc`
Fixes a couple of low hanging fruits.
- Fixes#2037
- `validators-dir` and `secrets-dir` flags don't really need to depend upon each other
- Fixes#2006 and Fixes#1995
## Description
This PR updates Lighthouse to tokio 0.3. It includes a number of dependency updates and some structural changes as to how we create and spawn tasks.
This also brings with it a number of various improvements:
- Discv5 update
- Libp2p update
- Fix for recompilation issues
- Improved UPnP port mapping handling
- Futures dependency update
- Log downgrade to traces for rejecting peers when we've reached our max
Co-authored-by: blacktemplar <blacktemplar@a1.net>
## Issue Addressed
Closes#1823
## Proposed Changes
* Use OS-level file locking for validator keystores, eliminating problems with lockfiles lingering after ungraceful shutdowns (`SIGKILL`, power outage). I'm using the `fs2` crate because it's cross-platform (unlike `file-lock`), and it seems to have the most downloads on crates.io.
* Deprecate + disable `--delete-lockfiles` CLI param, it's no longer necessary
* Delete the `validator_dir::Manager`, as it was mostly dead code and was only used in the `validator list` command, which has been rewritten to read the validator definitions YAML instead.
## Additional Info
Tested on:
- [x] Linux
- [x] macOS
- [x] Docker Linux
- [x] Docker macOS
- [ ] Windows
## Issue Addressed
NA
## Proposed Changes
- Adds a HTTP server to the VC which provides Prometheus metrics.
- Moves the health metrics into the `lighthouse_metrics` crate so it can be shared between BN/VC.
- Sprinkle some metrics around the VC.
- Update the book to indicate that we now have VC metrics.
- Shifts the "waiting for genesis" logic later in the `ProductionValidatorClient::new_from_cli`
- This is worth attention during the review.
## Additional Info
- ~~`clippy` has some new lints that are failing. I'll deal with that in another PR.~~
## Issue Addressed
- Resolves#1424
## Proposed Changes
Add a `GET lighthouse/staking` that returns 200 if the node is ready to stake (i.e., `--eth1` flag is present) or a 404 otherwise.
Whilst the VC is waiting for the genesis time to start (i.e., when the genesis state is known), check the `lighthouse/staking` endpoint and log an error if the node isn't configured for staking.
## Additional Info
NA
## Issue Addressed
Closes#1889
## Proposed Changes
- Error when passwords which use invalid UTF-8 characters during encryption.
- Add some tests
## Additional Info
I've decided to error when bad characters are used to create/encrypt a keystore but think we should allow them during decryption since either the keystore was created
- with invalid UTF-8 characters (possibly by another client or someone whose password is random bytes) in which case we'd want them to be able to decrypt their keystore using the right key.
- without invalid characters then the password checksum would almost certainly fail.
Happy to add them to decryption if we want to make the decryption more trigger happy 😋 , it would only be a one line change and would tell the user which character index is causing the issue.
See https://eips.ethereum.org/EIPS/eip-2335#password-requirements
## Issue Addressed
Catching up on a few eth2 spec updates:
## Proposed Changes
- adding query params to the `GET pool/attestations` endpoint
- allowing the `POST pool/attestations` endpoint to accept an array of attestations
- batching attestation submission
- moving `epoch` from a path param to a query param in the `committees` endpoint
## Additional Info
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Resolves#1809Resolves#1824Resolves#1818Resolves#1828 (hopefully)
## Proposed Changes
- add `validator_index` to the proposer duties endpoint
- add the ability to query for historical proposer duties
- `StateId` deserialization now fails with a 400 warp rejection
- add the `validator_balances` endpoint
- update the `aggregate_and_proofs` endpoint to accept an array
- updates the attester duties endpoint from a `GET` to a `POST`
- reduces the number of times we query for proposer duties from once per slot per validator to only once per slot
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
Improves the deletion of the validator key cache lock file in case of program interrupts.
## Additional Info
This should reduce cases where a lock file doesn't get removed on shutdown and reduce complaints on Discord. This will be superseded by issue #1823.
## Issue Addressed
NA
## Proposed Changes
- Panic or return error if we overflow `usize` in SSZ decoding/encoding derive macros.
- I claim that the panics can only be triggered by a faulty type definition in lighthouse, they cannot be triggered externally on a validly defined struct.
- Use `Ordering` instead of some `if` statements, as demanded by clippy.
- Remove some old clippy `allow` that seem to no longer be required.
- Add comments to interesting clippy statements that we're going to continue to ignore.
- Create #1713
## Additional Info
NA
## Issue Addressed
- Resolves#1766
## Proposed Changes
- Use the `warp::filters::cors` filter instead of our work-around.
## Additional Info
It's not trivial to enable/disable `cors` using `warp`, since using `routes.with(cors)` changes the type of `routes`. This makes it difficult to apply/not apply cors at runtime. My solution has been to *always* use the `warp::filters::cors` wrapper but when cors should be disabled, just pass the HTTP server listen address as the only permissible origin.
## Issue Addressed
NA
## Proposed Changes
- Don't exit early if the VC is without any validators.
- When there are no validators, always create the slashing database (even without `--init-slashing-protection`).
## Proposed Changes
* Add documentation about slashing protection, including how to troubleshoot issues and move between clients.
* Add an error message if the validator client is started with 0 validators. Previously it would hit an error relating to the slashing protection database not existing, which wrongly pushed people towards using the unsafe `--init-slashing-protection` flag.
## Issue Addressed
#1618
## Proposed Changes
Adds an encrypted key cache that is loaded on validator_client startup. It stores the keypairs for all enabled keystores and uses as password the concatenation the passwords of all enabled keystores. This reduces the number of time intensive key derivitions for `N` validators from `N` to `1`. On changes the cache gets updated asynchronously to avoid blocking the main thread.
## Additional Info
If the cache contains the keypair of a keystore that is not in the validator_definitions.yml file during loading the cache cannot get decrypted. In this case all the keystores get decrypted and then the cache gets overwritten. To avoid that one can disable keystores in validator_definitions.yml and restart the client which will remove them from the cache, after that one can entirely remove the keystore (from the validator_definitions.yml and from the disk).
Other solutions to the above "problem" might be:
* Add a CLI and/or API function for removing keystores which will update the cache (asynchronously).
* Add a CLI and/or API function that just updates the cache (asynchronously) after a modification of the `validator_definitions.yml` file.
Note that the cache file has a lock file which gets removed immediatly after the cache was used or updated.
## Issue Addressed
- Resolves#1705
## Proposed Changes
Cleans up some of my TODOs in the code base.
- Adds link to issue in this repo for BLST `unsafe` block.
- Confirms that the `nextaccount` field *is* required on an EIP-2386 wallet.
- Reference: https://github.com/mcdee/EIPs/blob/master/EIPS/eip-2386.md#json-schema
- Removes TODO about Zeroize on bip39 that was resolved in #1701
- Removes a TODO about an early randao reveal since we use the slot clock to generate the reveal: c4bd9c86e6/validator_client/src/block_service.rs (L212-L220)
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
- Implements a HTTP API for the validator client.
- Creates EIP-2335 keystores with an empty `description` field, instead of a missing `description` field. Adds option to set name.
- Be more graceful with setups without any validators (yet)
- Remove an error log when there are no validators.
- Create the `validator` dir if it doesn't exist.
- Allow building a `ValidatorDir` without a withdrawal keystore (required for the API method where we only post a voting keystore).
- Add optional `description` field to `validator_definitions.yml`
## TODO
- [x] Signature header, as per https://github.com/sigp/lighthouse/issues/1269#issuecomment-649879855
- [x] Return validator descriptions
- [x] Return deposit data
- [x] Respect the mnemonic offset
- [x] Check that mnemonic can derive returned keys
- [x] Be strict about non-localhost
- [x] Allow graceful start without any validators (+ create validator dir)
- [x] Docs final pass
- [x] Swap to EIP-2335 description field.
- [x] Fix Zerioze TODO in VC api types.
- [x] Zeroize secp256k1 key
## Endpoints
- [x] `GET /lighthouse/version`
- [x] `GET /lighthouse/health`
- [x] `GET /lighthouse/validators`
- [x] `POST /lighthouse/validators/hd`
- [x] `POST /lighthouse/validators/keystore`
- [x] `PATCH /lighthouse/validators/:validator_pubkey`
- [ ] ~~`POST /lighthouse/validators/:validator_pubkey/exit/:epoch`~~ Future works
## Additional Info
TBC
## Issue Addressed
Implements support for importing and exporting the slashing protection DB interchange format described here:
https://hackmd.io/@sproul/Bk0Y0qdGD
Also closes#1584
## Proposed Changes
* [x] Support for serializing and deserializing the format
* [x] Support for importing and exporting Lighthouse's database
* [x] CLI commands to invoke import and export
* [x] Export to minimal format (required when a minimal format has been previously imported)
* [x] Tests for export to minimal (utilising mixed importing and attestation signing?)
* [x] Tests for import/export of complete format, and import of minimal format
* [x] ~~Prevent attestations with sources less than our max source (Danny's suggestion). Required for the fake attestation that we put in for the minimal format to block attestations from source 0.~~
* [x] Add the concept of a "low watermark" for compatibility with the minimal format
Bonus!
* [x] A fix to a potentially nasty bug involving validators getting re-registered each time the validator client ran! Thankfully, the ordering of keys meant that the validator IDs used for attestations and blocks remained stable -- otherwise we could have had some slashings on our hands! 😱
* [x] Tests to confirm that this bug is indeed vanquished
- Resolves#1550
- Resolves#824
- Resolves#825
- Resolves#1131
- Resolves#1411
- Resolves#1256
- Resolve#1177
- Includes the `ShufflingId` struct initially defined in #1492. That PR is now closed and the changes are included here, with significant bug fixes.
- Implement the https://github.com/ethereum/eth2.0-APIs in a new `http_api` crate using `warp`. This replaces the `rest_api` crate.
- Add a new `common/eth2` crate which provides a wrapper around `reqwest`, providing the HTTP client that is used by the validator client and for testing. This replaces the `common/remote_beacon_node` crate.
- Create a `http_metrics` crate which is a dedicated server for Prometheus metrics (they are no longer served on the same port as the REST API). We now have flags for `--metrics`, `--metrics-address`, etc.
- Allow the `subnet_id` to be an optional parameter for `VerifiedUnaggregatedAttestation::verify`. This means it does not need to be provided unnecessarily by the validator client.
- Move `fn map_attestation_committee` in `mod beacon_chain::attestation_verification` to a new `fn with_committee_cache` on the `BeaconChain` so the same cache can be used for obtaining validator duties.
- Add some other helpers to `BeaconChain` to assist with common API duties (e.g., `block_root_at_slot`, `head_beacon_block_root`).
- Change the `NaiveAggregationPool` so it can index attestations by `hash_tree_root(attestation.data)`. This is a requirement of the API.
- Add functions to `BeaconChainHarness` to allow it to create slashings and exits.
- Allow for `eth1::Eth1NetworkId` to go to/from a `String`.
- Add functions to the `OperationPool` to allow getting all objects in the pool.
- Add function to `BeaconState` to check if a committee cache is initialized.
- Fix bug where `seconds_per_eth1_block` was not transferring over from `YamlConfig` to `ChainSpec`.
- Add the `deposit_contract_address` to `YamlConfig` and `ChainSpec`. We needed to be able to return it in an API response.
- Change some uses of serde `serialize_with` and `deserialize_with` to a single use of `with` (code quality).
- Impl `Display` and `FromStr` for several BLS fields.
- Check for clock discrepancy when VC polls BN for sync state (with +/- 1 slot tolerance). This is not intended to be comprehensive, it was just easy to do.
- See #1434 for a per-endpoint overview.
- Seeking clarity here: https://github.com/ethereum/eth2.0-APIs/issues/75
- [x] Add docs for prom port to close#1256
- [x] Follow up on this #1177
- [x] ~~Follow up with #1424~~ Will fix in future PR.
- [x] Follow up with #1411
- [x] ~~Follow up with #1260~~ Will fix in future PR.
- [x] Add quotes to all integers.
- [x] Remove `rest_types`
- [x] Address missing beacon block error. (#1629)
- [x] ~~Add tests for lighthouse/peers endpoints~~ Wontfix
- [x] ~~Follow up with validator status proposal~~ Tracked in #1434
- [x] Unify graffiti structs
- [x] ~~Start server when waiting for genesis?~~ Will fix in future PR.
- [x] TODO in http_api tests
- [x] Move lighthouse endpoints off /eth/v1
- [x] Update docs to link to standard
- ~~Blocked on #1586~~
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Closes#1487Closes#1427
Directory restructure in accordance with #1487. Also has temporary migration code to move the old directories into new structure.
Also extracts all default directory names and utility functions into a `directory` crate to avoid repetitio.
~Since `validator_definition.yaml` stores absolute paths, users will have to manually change the keystore paths or delete the file to get the validators picked up by the vc.~. `validator_definition.yaml` is migrated as well from the default directories.
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
- Resolves#1313
## Proposed Changes
Changes the way we start the validator client and beacon node to ensure that we cleanly drop the validator keystores (which therefore ensures we cleanup their lockfiles).
Previously we were holding the validator keystores in a tokio task that was being forcefully killed (i.e., without `Drop`). Now, we hold them in a task that can gracefully handle a shutdown.
Also, switches the `--strict-lockfiles` flag to `--delete-lockfiles`. This means two things:
1. We are now strict on lockfiles by default (before we weren't).
1. There's a simple way for people delete the lockfiles if they experience a crash.
## Additional Info
I've only given the option to ignore *and* delete lockfiles, not just ignore them. I can't see a strong need for ignore-only but could easily add it, if the need arises.
I've flagged this as `api-breaking` since users that have lockfiles lingering around will be required to supply `--delete-lockfiles` next time they run.
## Issue Addressed
#1419
## Proposed Changes
Creates a `--graffiti` cli flag in the validator client. If the flag is set, it overrides graffiti in the beacon node.
## Additional Info
## Issue Addressed
NA
## Proposed Changes
- Refactor the `bls` crate to support multiple BLS "backends" (e.g., milagro, blst, etc).
- Removes some duplicate, unused code in `common/rest_types/src/validator.rs`.
- Removes the old "upgrade legacy keypairs" functionality (these were unencrypted keys that haven't been supported for a few testnets, no one should be using them anymore).
## Additional Info
Most of the files changed are just inconsequential changes to function names.
## TODO
- [x] Optimization levels
- [x] Infinity point: https://github.com/supranational/blst/issues/11
- [x] Ensure milagro *and* blst are tested via CI
- [x] What to do with unsafe code?
- [x] Test infinity point in signature sets
## Issue Addressed
NA
## Proposed Changes
- Introduces the `valdiator_definitions.yml` file which serves as an explicit list of validators that should be run by the validator client.
- Removes `--strict` flag, split into `--strict-lockfiles` and `--disable-auto-discover`
- Adds a "Validator Management" page to the book.
- Adds the `common/account_utils` crate which contains some logic that was starting to duplicate across the codebase.
The new docs for this feature are the best description of it (apart from the code, I guess): 9cb87e93ce/book/src/validator-management.md
## API Changes
This change should be transparent for *most* existing users. If the `valdiator_definitions.yml` doesn't exist then it will be automatically generated using a method that will detect all the validators in their `validators_dir`.
Users will have issues if they are:
1. Using `--strict`.
1. Have keystores in their `~/.lighthouse/validators` directory that weren't being detected by the current keystore discovery method.
For users with (1), the VC will refuse to start because the `--strict` flag has been removed. They will be forced to review `--help` and choose an equivalent flag.
For users with (2), this seems fairly unlikely and since we're only in testnets there's no *real* value on the line here. I'm happy to take the risk, it would be a different case for mainnet.
## Additional Info
This PR adds functionality we will need for #1347.
## TODO
- [x] Reconsider flags
- [x] Move doc into a more reasonable chapter.
- [x] Check for compile warnings.
* Update `milagro_bls` to new release (#1183)
* Update milagro_bls to new release
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* Tidy up fake cryptos
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* move SecretHash to bls and put plaintext back
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* Update v0.12.0 to v0.12.1
* Add compute_subnet_for_attestation
* Replace CommitteeIndex topic with Attestation
* Fix warnings
* Fix attestation service tests
* fmt
* Appease clippy
* return error from validator_subscriptions
* move state out of loop
* Fix early break on error
* Get state from slot clock
* Fix beacon state in attestation tests
* Add failing test for lookahead > 1
* Minor change
* Address some review comments
* Add subnet verification to beacon chain
* Move subnet verification to processor
* Pass committee_count_at_slot to ValidatorDuty and ValidatorSubscription
* Pass subnet id for publishing attestations
* Fix attestation service tests
* Fix more tests
* Fix fork choice test
* Remove unused code
* Remove more unused and expensive code
Co-authored-by: Kirk Baird <baird.k@outlook.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Age Manning <Age@AgeManning.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Add logging on shutdown
* Replace tokio::spawn with handle.spawn
* Upgrade tokio
* Add a task executor
* Beacon chain tasks use task executor
* Validator client tasks use task executor
* Rename runtime_handle to executor
* Add duration histograms; minor fixes
* Cleanup
* Fix logs
* Fix tests
* Remove random file
* Get enr dependency instead of libp2p
* Address some review comments
* Libp2p takes a TaskExecutor
* Ugly fix libp2p tests
* Move TaskExecutor to own file
* Upgrade Dockerfile rust version
* Minor fixes
* Revert "Ugly fix libp2p tests"
This reverts commit 58d4bb690f52de28d893943b7504d2d0c6621429.
* Pretty fix libp2p tests
* Add spawn_without_exit; change Counter to Gauge
* Tidy
* Move log from RuntimeContext to TaskExecutor
* Fix errors
* Replace histogram with int_gauge for async tasks
* Fix todo
* Fix memory leak in test by exiting all spawned tasks at the end
* Implement slashing protection
Roll-up of #588 with some conflicts resolved
* WIP improvements
* Require slot uniqueness for blocks (rather than epochs)
* Native DB support for Slot and Epoch
* Simplify surrounding/surrounded-by queries
* Implement unified slashing protection database
A single SQL database saves on open file descriptors.
* Make slashing protection concurrency safe.
Revive tests, add parallel tests.
* Some simplifications
* Auto-registration, test clean-ups
* More tests, clean-ups, hardening
* Fix comments in BLS
* Optimise bulk validator registration
* Delete outdated tests
* Use bundled SQLite in slashing protection
* Auto-register validators in simulation
* Use real signing_root in slashing protection
* Update book for --auto-register
* Refine log messages and help flags
* Correct typo in Cargo.toml authors
* Fix merge conflicts
* Safer error handling in sqlite slot/epoch
* Address review comments
* Add attestation test mutating block root
Co-authored-by: pscott <scottpiriou@gmail.com>
* Port eth1 lib to use stable futures
* Port eth1_test_rig to stable futures
* Port eth1 tests to stable futures
* Port genesis service to stable futures
* Port genesis tests to stable futures
* Port beacon_chain to stable futures
* Port lcli to stable futures
* Fix eth1_test_rig (#1014)
* Fix lcli
* Port timer to stable futures
* Fix timer
* Port websocket_server to stable futures
* Port notifier to stable futures
* Add TODOS
* Update hashmap hashset to stable futures
* Adds panic test to hashset delay
* Port remote_beacon_node to stable futures
* Fix lcli merge conflicts
* Non rpc stuff compiles
* protocol.rs compiles
* Port websockets, timer and notifier to stable futures (#1035)
* Fix lcli
* Port timer to stable futures
* Fix timer
* Port websocket_server to stable futures
* Port notifier to stable futures
* Add TODOS
* Port remote_beacon_node to stable futures
* Partial eth2-libp2p stable future upgrade
* Finished first round of fighting RPC types
* Further progress towards porting eth2-libp2p adds caching to discovery
* Update behaviour
* RPC handler to stable futures
* Update RPC to master libp2p
* Network service additions
* Fix the fallback transport construction (#1102)
* Correct warning
* Remove hashmap delay
* Compiling version of eth2-libp2p
* Update all crates versions
* Fix conversion function and add tests (#1113)
* Port validator_client to stable futures (#1114)
* Add PH & MS slot clock changes
* Account for genesis time
* Add progress on duties refactor
* Add simple is_aggregator bool to val subscription
* Start work on attestation_verification.rs
* Add progress on ObservedAttestations
* Progress with ObservedAttestations
* Fix tests
* Add observed attestations to the beacon chain
* Add attestation observation to processing code
* Add progress on attestation verification
* Add first draft of ObservedAttesters
* Add more tests
* Add observed attesters to beacon chain
* Add observers to attestation processing
* Add more attestation verification
* Create ObservedAggregators map
* Remove commented-out code
* Add observed aggregators into chain
* Add progress
* Finish adding features to attestation verification
* Ensure beacon chain compiles
* Link attn verification into chain
* Integrate new attn verification in chain
* Remove old attestation processing code
* Start trying to fix beacon_chain tests
* Split adding into pools into two functions
* Add aggregation to harness
* Get test harness working again
* Adjust the number of aggregators for test harness
* Fix edge-case in harness
* Integrate new attn processing in network
* Fix compile bug in validator_client
* Update validator API endpoints
* Fix aggreagation in test harness
* Fix enum thing
* Fix attestation observation bug:
* Patch failing API tests
* Start adding comments to attestation verification
* Remove unused attestation field
* Unify "is block known" logic
* Update comments
* Supress fork choice errors for network processing
* Add todos
* Tidy
* Add gossip attn tests
* Disallow test harness to produce old attns
* Comment out in-progress tests
* Partially address pruning tests
* Fix failing store test
* Add aggregate tests
* Add comments about which spec conditions we check
* Dont re-aggregate
* Split apart test harness attn production
* Fix compile error in network
* Make progress on commented-out test
* Fix skipping attestation test
* Add fork choice verification tests
* Tidy attn tests, remove dead code
* Remove some accidentally added code
* Fix clippy lint
* Rename test file
* Add block tests, add cheap block proposer check
* Rename block testing file
* Add observed_block_producers
* Tidy
* Switch around block signature verification
* Finish block testing
* Remove gossip from signature tests
* First pass of self review
* Fix deviation in spec
* Update test spec tags
* Start moving over to hashset
* Finish moving observed attesters to hashmap
* Move aggregation pool over to hashmap
* Make fc attn borrow again
* Fix rest_api compile error
* Fix missing comments
* Fix monster test
* Uncomment increasing slots test
* Address remaining comments
* Remove unsafe, use cfg test
* Remove cfg test flag
* Fix dodgy comment
* Revert "Update hashmap hashset to stable futures"
This reverts commit d432378a3cc5cd67fc29c0b15b96b886c1323554.
* Revert "Adds panic test to hashset delay"
This reverts commit 281502396fc5b90d9c421a309c2c056982c9525b.
* Ported attestation_service
* Ported duties_service
* Ported fork_service
* More ports
* Port block_service
* Minor fixes
* VC compiles
* Update TODOS
* Borrow self where possible
* Ignore aggregates that are already known.
* Unify aggregator modulo logic
* Fix typo in logs
* Refactor validator subscription logic
* Avoid reproducing selection proof
* Skip HTTP call if no subscriptions
* Rename DutyAndState -> DutyAndProof
* Tidy logs
* Print root as dbg
* Fix compile errors in tests
* Fix compile error in test
* Re-Fix attestation and duties service
* Minor fixes
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Network crate update to stable futures
* Port account_manager to stable futures (#1121)
* Port account_manager to stable futures
* Run async fns in tokio environment
* Port rest_api crate to stable futures (#1118)
* Port rest_api lib to stable futures
* Reduce tokio features
* Update notifier to stable futures
* Builder update
* Further updates
* Convert self referential async functions
* stable futures fixes (#1124)
* Fix eth1 update functions
* Fix genesis and client
* Fix beacon node lib
* Return appropriate runtimes from environment
* Fix test rig
* Refactor eth1 service update
* Upgrade simulator to stable futures
* Lighthouse compiles on stable futures
* Remove println debugging statement
* Update libp2p service, start rpc test upgrade
* Update network crate for new libp2p
* Update tokio::codec to futures_codec (#1128)
* Further work towards RPC corrections
* Correct http timeout and network service select
* Use tokio runtime for libp2p
* Revert "Update tokio::codec to futures_codec (#1128)"
This reverts commit e57aea924acf5cbabdcea18895ac07e38a425ed7.
* Upgrade RPC libp2p tests
* Upgrade secio fallback test
* Upgrade gossipsub examples
* Clean up RPC protocol
* Test fixes (#1133)
* Correct websocket timeout and run on os thread
* Fix network test
* Clean up PR
* Correct tokio tcp move attestation service tests
* Upgrade attestation service tests
* Correct network test
* Correct genesis test
* Test corrections
* Log info when block is received
* Modify logs and update attester service events
* Stable futures: fixes to vc, eth1 and account manager (#1142)
* Add local testnet scripts
* Remove whiteblock script
* Rename local testnet script
* Move spawns onto handle
* Fix VC panic
* Initial fix to block production issue
* Tidy block producer fix
* Tidy further
* Add local testnet clean script
* Run cargo fmt
* Tidy duties service
* Tidy fork service
* Tidy ForkService
* Tidy AttestationService
* Tidy notifier
* Ensure await is not suppressed in eth1
* Ensure await is not suppressed in account_manager
* Use .ok() instead of .unwrap_or(())
* RPC decoding test for proto
* Update discv5 and eth2-libp2p deps
* Fix lcli double runtime issue (#1144)
* Handle stream termination and dialing peer errors
* Correct peer_info variant types
* Remove unnecessary warnings
* Handle subnet unsubscription removal and improve logigng
* Add logs around ping
* Upgrade discv5 and improve logging
* Handle peer connection status for multiple connections
* Improve network service logging
* Improve logging around peer manager
* Upgrade swarm poll centralise peer management
* Identify clients on error
* Fix `remove_peer` in sync (#1150)
* remove_peer removes from all chains
* Remove logs
* Fix early return from loop
* Improved logging, fix panic
* Partially correct tests
* Stable futures: Vc sync (#1149)
* Improve syncing heuristic
* Add comments
* Use safer method for tolerance
* Fix tests
* Stable futures: Fix VC bug, update agg pool, add more metrics (#1151)
* Expose epoch processing summary
* Expose participation metrics to prometheus
* Switch to f64
* Reduce precision
* Change precision
* Expose observed attesters metrics
* Add metrics for agg/unagg attn counts
* Add metrics for gossip rx
* Add metrics for gossip tx
* Adds ignored attns to prom
* Add attestation timing
* Add timer for aggregation pool sig agg
* Add write lock timer for agg pool
* Add more metrics to agg pool
* Change map lock code
* Add extra metric to agg pool
* Change lock handling in agg pool
* Change .write() to .read()
* Add another agg pool timer
* Fix for is_aggregator
* Fix pruning bug
Co-authored-by: pawan <pawandhananjay@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Add PH & MS slot clock changes
* Account for genesis time
* Add progress on duties refactor
* Add simple is_aggregator bool to val subscription
* Start work on attestation_verification.rs
* Add progress on ObservedAttestations
* Progress with ObservedAttestations
* Fix tests
* Add observed attestations to the beacon chain
* Add attestation observation to processing code
* Add progress on attestation verification
* Add first draft of ObservedAttesters
* Add more tests
* Add observed attesters to beacon chain
* Add observers to attestation processing
* Add more attestation verification
* Create ObservedAggregators map
* Remove commented-out code
* Add observed aggregators into chain
* Add progress
* Finish adding features to attestation verification
* Ensure beacon chain compiles
* Link attn verification into chain
* Integrate new attn verification in chain
* Remove old attestation processing code
* Start trying to fix beacon_chain tests
* Split adding into pools into two functions
* Add aggregation to harness
* Get test harness working again
* Adjust the number of aggregators for test harness
* Fix edge-case in harness
* Integrate new attn processing in network
* Fix compile bug in validator_client
* Update validator API endpoints
* Fix aggreagation in test harness
* Fix enum thing
* Fix attestation observation bug:
* Patch failing API tests
* Start adding comments to attestation verification
* Remove unused attestation field
* Unify "is block known" logic
* Update comments
* Supress fork choice errors for network processing
* Add todos
* Tidy
* Add gossip attn tests
* Disallow test harness to produce old attns
* Comment out in-progress tests
* Partially address pruning tests
* Fix failing store test
* Add aggregate tests
* Add comments about which spec conditions we check
* Dont re-aggregate
* Split apart test harness attn production
* Fix compile error in network
* Make progress on commented-out test
* Fix skipping attestation test
* Add fork choice verification tests
* Tidy attn tests, remove dead code
* Remove some accidentally added code
* Fix clippy lint
* Rename test file
* Add block tests, add cheap block proposer check
* Rename block testing file
* Add observed_block_producers
* Tidy
* Switch around block signature verification
* Finish block testing
* Remove gossip from signature tests
* First pass of self review
* Fix deviation in spec
* Update test spec tags
* Start moving over to hashset
* Finish moving observed attesters to hashmap
* Move aggregation pool over to hashmap
* Make fc attn borrow again
* Fix rest_api compile error
* Fix missing comments
* Fix monster test
* Uncomment increasing slots test
* Address remaining comments
* Remove unsafe, use cfg test
* Remove cfg test flag
* Fix dodgy comment
* Ignore aggregates that are already known.
* Unify aggregator modulo logic
* Fix typo in logs
* Refactor validator subscription logic
* Avoid reproducing selection proof
* Skip HTTP call if no subscriptions
* Rename DutyAndState -> DutyAndProof
* Tidy logs
* Print root as dbg
* Fix compile errors in tests
* Fix compile error in test
* Add progress on new deposits
* Add deposited command to account manager
* Remove old lcli::helpers mod
* Clean clap_utils
* Refactor lcli deposit contract commands to use IPC
* Make testnet optional for environment
* Use dbg formatting for deploy address
* Add command to generate bootnode enr
* Ensure lcli returns with 1 on error
* Ensure account manager returns 1 on error
* Disallow deposits to the zero address
* Update web3 in eth1 crate
* Ensure correct lighthouse dir is created
* Reduce deposit gas requirement
* Update cargo.lock
* Add progress on new deposits
* Add deposited command to account manager
* Remove old lcli::helpers mod
* Clean clap_utils
* Refactor lcli deposit contract commands to use IPC
* Add command to generate bootnode enr
* Ensure lcli returns with 1 on error
* Ensure account manager returns 1 on error
* Update web3 in eth1 crate
* Update Cargo.lock
* Move lcli out of main install script
* Change --limit to --at-least
* Change --datadir to --validator-dir
* Remove duplication in docs
* Refactor `Attestation` production
* Add constant
* Start refactor for aggregation
* Return early when no attesting validators
* Refactor into individual functions
* Tidy, add comments
* Add first draft of NaiveAggregationPool
* Further progress on naive aggregation pool
* Fix compile errors in VC
* Change locking logic for naive pool
* Introduce AttesationType
* Add pruning, comments
* Add MAX_ATTESTATIONS_PER_SLOT restriction
* Add pruning based on slot
* Update BN for new aggregation fns
* Fix test compile errors
* Fix failing rest_api test
* Move SignedAggregateAndProof into own file
* Update docs, fix warning
* Tidy some formatting in validator API
* Remove T::default_spec from signing
* Fix failing rest test
* Tidy
* Add test, fix bug
* Improve naive pool tests
* Add max attestations test
* Revert changes to the op_pool
* Refactor timer
* Remove ping protocol
* Initial renaming of network services
* Correct rebasing relative to latest master
* Start updating types
* Adds HashMapDelay struct to utils
* Initial network restructure
* Network restructure. Adds new types for v0.2.0
* Removes build artefacts
* Shift validation to beacon chain
* Temporarily remove gossip validation
This is to be updated to match current optimisation efforts.
* Adds AggregateAndProof
* Begin rebuilding pubsub encoding/decoding
* Signature hacking
* Shift gossipsup decoding into eth2_libp2p
* Existing EF tests passing with fake_crypto
* Shifts block encoding/decoding into RPC
* Delete outdated API spec
* All release tests passing bar genesis state parsing
* Update and test YamlConfig
* Update to spec v0.10 compatible BLS
* Updates to BLS EF tests
* Add EF test for AggregateVerify
And delete unused hash2curve tests for uncompressed points
* Update EF tests to v0.10.1
* Use optional block root correctly in block proc
* Use genesis fork in deposit domain. All tests pass
* Fast aggregate verify test
* Update REST API docs
* Fix unused import
* Bump spec tags to v0.10.1
* Add `seconds_per_eth1_block` to chainspec
* Update to timestamp based eth1 voting scheme
* Return None from `get_votes_to_consider` if block cache is empty
* Handle overflows in `is_candidate_block`
* Revert to failing tests
* Fix eth1 data sets test
* Choose default vote according to spec
* Fix collect_valid_votes tests
* Fix `get_votes_to_consider` to choose all eligible blocks
* Uncomment winning_vote tests
* Add comments; remove unused code
* Reduce seconds_per_eth1_block for simulation
* Addressed review comments
* Add test for default vote case
* Fix logs
* Remove unused functions
* Meter default eth1 votes
* Fix comments
* Progress on attestation service
* Address review comments; remove unused dependency
* Initial work on removing libp2p lock
* Add LRU caches to store (rollup)
* Update attestation validation for DB changes (WIP)
* Initial version of should_forward_block
* Scaffold
* Progress on attestation validation
Also, consolidate prod+testing slot clocks so that they share much
of the same implementation and can both handle sub-slot time changes.
* Removes lock from libp2p service
* Completed network lock removal
* Finish(?) attestation processing
* Correct network termination future
* Add slot check to block check
* Correct fmt issues
* Remove Drop implementation for network service
* Add first attempt at attestation proc. re-write
* Add version 2 of attestation processing
* Minor fixes
* Add validator pubkey cache
* Make get_indexed_attestation take a committee
* Link signature processing into new attn verification
* First working version
* Ensure pubkey cache is updated
* Add more metrics, slight optimizations
* Clone committee cache during attestation processing
* Update shuffling cache during block processing
* Remove old commented-out code
* Fix shuffling cache insert bug
* Used indexed attestation in fork choice
* Restructure attn processing, add metrics
* Add more detailed metrics
* Tidy, fix failing tests
* Fix failing tests, tidy
* Address reviewers suggestions
* Disable/delete two outdated tests
* Modification of validator for subscriptions
* Add slot signing to validator client
* Further progress on validation subscription
* Adds necessary validator subscription functionality
* Add new Pubkeys struct to signature_sets
* Refactor with functional approach
* Update beacon chain
* Clean up validator <-> beacon node http types
* Add aggregator status to ValidatorDuty
* Impl Clone for manual slot clock
* Fix minor errors
* Further progress validator client subscription
* Initial subscription and aggregation handling
* Remove decompressed member from pubkey bytes
* Progress to modifying val client for attestation aggregation
* First draft of validator client upgrade for aggregate attestations
* Add hashmap for indices lookup
* Add state cache, remove store cache
* Only build the head committee cache
* Removes lock on a network channel
* Partially implement beacon node subscription http api
* Correct compilation issues
* Change `get_attesting_indices` to use Vec
* Fix failing test
* Partial implementation of timer
* Adds timer, removes exit_future, http api to op pool
* Partial multiple aggregate attestation handling
* Permits bulk messages accross gossipsub network channel
* Correct compile issues
* Improve gosispsub messaging and correct rest api helpers
* Added global gossipsub subscriptions
* Update validator subscriptions data structs
* Tidy
* Re-structure validator subscriptions
* Initial handling of subscriptions
* Re-structure network service
* Add pubkey cache persistence file
* Add more comments
* Integrate persistence file into builder
* Add pubkey cache tests
* Add HashSetDelay and introduce into attestation service
* Handles validator subscriptions
* Add data_dir to beacon chain builder
* Remove Option in pubkey cache persistence file
* Ensure consistency between datadir/data_dir
* Fix failing network test
* Peer subnet discovery gets queued for future subscriptions
* Reorganise attestation service functions
* Initial wiring of attestation service
* First draft of attestation service timing logic
* Correct minor typos
* Tidy
* Fix todos
* Improve tests
* Add PeerInfo to connected peers mapping
* Fix compile error
* Fix compile error from merge
* Split up block processing metrics
* Tidy
* Refactor get_pubkey_from_state
* Remove commented-out code
* Rename state_cache -> checkpoint_cache
* Rename Checkpoint -> Snapshot
* Tidy, add comments
* Tidy up find_head function
* Change some checkpoint -> snapshot
* Add tests
* Expose max_len
* Remove dead code
* Tidy
* Fix bug
* Add sync-speed metric
* Add first attempt at VerifiableBlock
* Start integrating into beacon chain
* Integrate VerifiableBlock
* Rename VerifableBlock -> PartialBlockVerification
* Add start of typed methods
* Add progress
* Add further progress
* Rename structs
* Add full block verification to block_processing.rs
* Further beacon chain integration
* Update checks for gossip
* Add todo
* Start adding segement verification
* Add passing chain segement test
* Initial integration with batch sync
* Minor changes
* Tidy, add more error checking
* Start adding chain_segment tests
* Finish invalid signature tests
* Include single and gossip verified blocks in tests
* Add gossip verification tests
* Start adding docs
* Finish adding comments to block_processing.rs
* Rename block_processing.rs -> block_verification
* Start removing old block processing code
* Fixes beacon_chain compilation
* Fix project-wide compile errors
* Remove old code
* Correct code to pass all tests
* Fix bug with beacon proposer index
* Fix shim for BlockProcessingError
* Only process one epoch at a time
* Fix loop in chain segment processing
* Correct tests from master merge
* Add caching for state.eth1_data_votes
* Add BeaconChain::validator_pubkey
* Revert "Add caching for state.eth1_data_votes"
This reverts commit cd73dcd6434fb8d8e6bf30c5356355598ea7b78e.
Co-authored-by: Grant Wuerker <gwuerker@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
Co-authored-by: pawan <pawandhananjay@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Start updating types
* WIP
* Signature hacking
* Existing EF tests passing with fake_crypto
* Updates
* Delete outdated API spec
* The refactor continues
* It compiles
* WIP test fixes
* All release tests passing bar genesis state parsing
* Update and test YamlConfig
* Update to spec v0.10 compatible BLS
* Updates to BLS EF tests
* Add EF test for AggregateVerify
And delete unused hash2curve tests for uncompressed points
* Update EF tests to v0.10.1
* Use optional block root correctly in block proc
* Use genesis fork in deposit domain. All tests pass
* Cargo fmt
* Fast aggregate verify test
* Update REST API docs
* Cargo fmt
* Fix unused import
* Bump spec tags to v0.10.1
* Add `seconds_per_eth1_block` to chainspec
* Update to timestamp based eth1 voting scheme
* Return None from `get_votes_to_consider` if block cache is empty
* Handle overflows in `is_candidate_block`
* Revert to failing tests
* Fix eth1 data sets test
* Choose default vote according to spec
* Fix collect_valid_votes tests
* Fix `get_votes_to_consider` to choose all eligible blocks
* Uncomment winning_vote tests
* Add comments; remove unused code
* Reduce seconds_per_eth1_block for simulation
* Addressed review comments
* Add test for default vote case
* Fix logs
* Remove unused functions
* Meter default eth1 votes
* Fix comments
* Address review comments; remove unused dependency
* Disable/delete two outdated tests
* Bump eth1 default vote warn to error
* Delete outdated eth1 test
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
* Start adding interop genesis state to lcli
* Use more efficient method to generate genesis state
* Remove duplicate int_to_bytes32
* Add lcli command to change state genesis time
* Add option to allow VC to start with unsynced BN
* Set VC to do parallel key loading
* Don't default to dummy eth1 backend
* Add endpoint to dump operation pool
* Add metrics for op pool
* Remove state clone for slot notifier
* Add mem size approximation for tree hash cache
* Avoid cloning tree hash when getting head
* Fix failing API tests
* Address Michael's comments
* Add HashMap::from_par_iter
* Add first draft of validator onboarding
* Update docs
* Add documentation link to main README
* Continue docs development
* Update book readme
* Update docs
* Allow vc to run without testnet subcommand
* Small change to onboarding docs
* Tidy CLI help messages
* Update docs
* Add check to val client see if beacon node is synced
* Add notifier service to validator client
* Re-order onboarding steps
* Update deposit contract address
* Update testnet dir
* Add note about public eth1 node
* Set default eth1 endpoint to sigp
* Fix broken test
* Try fix eth1 cache locking
* Be more specific about eth1 endpoint
* Increase gas limit for deposit
* Fix default deposit amount
* Add state enc/dec benches
* Add example for flamegraph
* Use `PublicKeyBytes` for `Validator`
* Ripple PublicKeyBytes change through codebase
* Add benches, optimizations to store BeaconState
* Store BeaconState in StorageContainer too
* Optimize StorageContainer with std::mem magic
* Fix rest_api tests
* Update to spec v0.9.0
* Update to v0.9.1
* Bump spec tags for v0.9.1
* Formatting, fix CI failures
* Resolve accidental KeyPair merge conflict
* Document new BeaconState functions
* Add `validator` changes from `validator-to-rest`
* Add initial (failing) REST api tests
* Fix signature parsing
* Add more tests
* Refactor http router
* Add working tests for publish beacon block
* Add validator duties tests
* Move account_manager under `lighthouse` binary
* Unify logfile handling in `environment` crate.
* Fix incorrect cache drops in `advance_caches`
* Update fork choice for v0.9.1
* Add `deposit_contract` crate
* Add progress on validator onboarding
* Add unfinished attesation code
* Update account manager CLI
* Write eth1 data file as hex string
* Integrate ValidatorDirectory with validator_client
* Move ValidatorDirectory into validator_client
* Clean up some FIXMEs
* Add beacon_chain_sim
* Fix a few docs/logs
* Expand `beacon_chain_sim`
* Fix spec for `beacon_chain_sim
* More testing for api
* Start work on attestation endpoint
* Reject empty attestations
* Allow attestations to genesis block
* Add working tests for `rest_api` validator endpoint
* Remove grpc from beacon_node
* Start heavy refactor of validator client
- Block production is working
* Prune old validator client files
* Start works on attestation service
* Add attestation service to validator client
* Use full pubkey for validator directories
* Add validator duties post endpoint
* Use par_iter for keypair generation
* Use bulk duties request in validator client
* Add version http endpoint tests
* Add interop keys and startup wait
* Ensure a prompt exit
* Add duties pruning
* Fix compile error in beacon node tests
* Add github workflow
* Modify rust.yaml
* Modify gitlab actions
* Add to CI file
* Add sudo to CI npm install
* Move cargo fmt to own job in tests
* Fix cargo fmt in CI
* Add rustup update before cargo fmt
* Change name of CI job
* Make other CI jobs require cargo fmt
* Add CI badge
* Remove gitlab and travis files
* Add different http timeout for debug
* Update docker file, use makefile in CI
* Use make in the dockerfile, skip the test
* Use the makefile for debug GI test
* Update book
* Tidy grpc and misc things
* Apply discv5 fixes
* Address other minor issues
* Fix warnings
* Attempt fix for addr parsing
* Tidy validator config, CLIs
* Tidy comments
* Tidy signing, reduce ForkService duplication
* Fail if skipping too many slots
* Set default recent genesis time to 0
* Add custom http timeout to validator
* Fix compile bug in node_test_rig
* Remove old bootstrap flag from val CLI
* Update docs
* Tidy val client
* Change val client log levels
* Add comments, more validity checks
* Fix compile error, add comments
* Undo changes to eth2-libp2p/src
* Reduce duplication of keypair generation
* Add more logging for validator duties
* Fix beacon_chain_sim, nitpicks
* Fix compile error, minor nits
* Update to use v0.9.2 version of deposit contract
* Add efforts to automate eth1 testnet deployment
* Fix lcli testnet deployer
* Modify bn CLI to parse eth2_testnet_dir
* Progress with account_manager deposit tools
* Make account manager submit deposits
* Add password option for submitting deposits
* Allow custom deposit amount
* Add long names to lcli clap
* Add password option to lcli deploy command
* Fix minor bugs whilst testing
* Address Michael's comments
* Add refund-deposit-contract to lcli
* Use time instead of skip count for denying long skips
* Improve logging for eth1
* Fix bug with validator services exiting on error
* Drop the block cache after genesis
* Modify eth1 testnet config
* Improve eth1 logging
* Make validator wait until genesis time
* Fix bug in eth1 voting
* Add more logging to eth1 voting
* Handle errors in eth1 http module
* Set SECONDS_PER_DAY to sensible minimum
* Shorten delay before testnet start
* Ensure eth1 block is produced without any votes
* Improve eth1 logging
* Fix broken tests in eth1
* Tidy code in rest_api
* Fix failing test in deposit_contract
* Make CLI args more consistent
* Change validator/duties endpoint
* Add time-based skip slot limiting
* Add new error type missed in previous commit
* Add log when waiting for genesis
* Refactor beacon node CLI
* Remove unused dep
* Add lcli eth1-genesis command
* Fix bug in master merge
* Apply clippy lints to beacon node
* Add support for YamlConfig in Eth2TestnetDir
* Upgrade tesnet deposit contract version
* Remove unnecessary logging and correct formatting
* Add a hardcoded eth2 testnet config
* Ensure http server flag works. Overwrite configs with flags.
* Ensure boot nodes are loaded from testnet dir
* Fix account manager CLI bugs
* Fix bugs with beacon node cli
* Allow testnet dir without boot nodes
* Write genesis state as SSZ
* Remove ---/n from the start of testnet_dir files
* Set default libp2p address
* Tidy account manager CLI, add logging
* Add check to see if testnet dir exists
* Apply reviewers suggestions
* Add HeadTracker struct
* Add fork choice persistence
* Shorten slot time for simulator
* Add the /beacon/heads API endpoint
* Update hardcoded testnet
* Add tests for BeaconChain persistence + fix bugs
* Extend BeaconChain persistence testing
* Ensure chain is finalized b4 persistence tests
* Ensure boot_enr.yaml is include in binary
* Refactor beacon_chain_sim
* Move files about in beacon sim
* Update beacon_chain_sim
* Fix bug with deposit inclusion
* Increase log in genesis service, fix todo
* Tidy sim, fix broken rest_api tests
* Fix more broken tests
* Update testnet
* Fix broken rest api test
* Tidy account manager CLI
* Use tempdir for account manager
* Stop hardcoded testnet dir from creating dir
* Rename Eth2TestnetDir to Eth2TestnetConfig
* Change hardcoded -> hard_coded
* Tidy account manager
* Add log to account manager
* Tidy, ensure head tracker is loaded from disk
* Tidy beacon chain builder
* Tidy eth1_chain
* Adds log support for simulator
* Revert "Adds log support for simulator"
This reverts commit ec77c66a052350f551db145cf20f213823428dd3.
* Adds log support for simulator
* Tidy after self-review
* Change default log level
* Address Michael's delicious PR comments
* Fix off-by-one in tests
* Update to spec v0.9.0
* Update to v0.9.1
* Bump spec tags for v0.9.1
* Formatting, fix CI failures
* Resolve accidental KeyPair merge conflict
* Document new BeaconState functions
* Add `validator` changes from `validator-to-rest`
* Add initial (failing) REST api tests
* Fix signature parsing
* Add more tests
* Refactor http router
* Add working tests for publish beacon block
* Add validator duties tests
* Move account_manager under `lighthouse` binary
* Unify logfile handling in `environment` crate.
* Fix incorrect cache drops in `advance_caches`
* Update fork choice for v0.9.1
* Add `deposit_contract` crate
* Add progress on validator onboarding
* Add unfinished attesation code
* Update account manager CLI
* Write eth1 data file as hex string
* Integrate ValidatorDirectory with validator_client
* Move ValidatorDirectory into validator_client
* Clean up some FIXMEs
* Add beacon_chain_sim
* Fix a few docs/logs
* Expand `beacon_chain_sim`
* Fix spec for `beacon_chain_sim
* More testing for api
* Start work on attestation endpoint
* Reject empty attestations
* Allow attestations to genesis block
* Add working tests for `rest_api` validator endpoint
* Remove grpc from beacon_node
* Start heavy refactor of validator client
- Block production is working
* Prune old validator client files
* Start works on attestation service
* Add attestation service to validator client
* Use full pubkey for validator directories
* Add validator duties post endpoint
* Use par_iter for keypair generation
* Use bulk duties request in validator client
* Add version http endpoint tests
* Add interop keys and startup wait
* Ensure a prompt exit
* Add duties pruning
* Fix compile error in beacon node tests
* Add github workflow
* Modify rust.yaml
* Modify gitlab actions
* Add to CI file
* Add sudo to CI npm install
* Move cargo fmt to own job in tests
* Fix cargo fmt in CI
* Add rustup update before cargo fmt
* Change name of CI job
* Make other CI jobs require cargo fmt
* Add CI badge
* Remove gitlab and travis files
* Add different http timeout for debug
* Update docker file, use makefile in CI
* Use make in the dockerfile, skip the test
* Use the makefile for debug GI test
* Update book
* Tidy grpc and misc things
* Apply discv5 fixes
* Address other minor issues
* Fix warnings
* Attempt fix for addr parsing
* Tidy validator config, CLIs
* Tidy comments
* Tidy signing, reduce ForkService duplication
* Fail if skipping too many slots
* Set default recent genesis time to 0
* Add custom http timeout to validator
* Fix compile bug in node_test_rig
* Remove old bootstrap flag from val CLI
* Update docs
* Tidy val client
* Change val client log levels
* Add comments, more validity checks
* Fix compile error, add comments
* Undo changes to eth2-libp2p/src
* Reduce duplication of keypair generation
* Add more logging for validator duties
* Fix beacon_chain_sim, nitpicks
* Fix compile error, minor nits
* Address Michael's comments
* Update to spec v0.9.0
* Update to v0.9.1
* Bump spec tags for v0.9.1
* Formatting, fix CI failures
* Resolve accidental KeyPair merge conflict
* Document new BeaconState functions
* Fix incorrect cache drops in `advance_caches`
* Update fork choice for v0.9.1
* Clean up some FIXMEs
* Fix a few docs/logs
* Refactor to cache Eth1Data
* Fix merge conflicts and minor refactorings
* Rename Eth1Cache to Eth1DataCache
* Refactor events subscription
* Add deposits module to interface with BeaconChain deposits
* Remove utils
* Rename to types.rs and add trait constraints to Eth1DataFetcher
* Confirm to trait constraints. Make Web3DataFetcher cloneable
* Make fetcher object member of deposit and eth1_data cache and other fixes
* Fix update_cache function
* Move fetch_eth1_data to impl block
* Fix deposit tests
* Create Eth1 object for interfacing with Beacon chain
* Add `run` function for running update_cache and subscribe_deposit_logs tasks
* Add logging
* Run `cargo fmt` and make tests pass
* Convert sync functions to async
* Add timeouts to web3 functions
* Return futures from cache functions
* Add failed chaining of futures
* Working cache updation
* Clean up tests and `update_cache` function
* Refactor `get_eth1_data` functions to work with future returning functions
* Refactor eth1 `run` function to work with modified `update_cache` api
* Minor changes
* Add distance parameter to `update_cache`
* Fix tests and other minor fixes
* Working integration with cache and deposits
* Add merkle_tree construction, proof generation and verification code
* Add function to construct and fetch Deposits for BeaconNode
* Add error handling
* Import ssz
* Add error handling to eth1 cache and fix minor errors
* Run rustfmt
* Fix minor bug
* Rename Eth1Error and change to Result<T>
* Change deposit fetching mechanism from notification based to poll based
* Add deposits from eth1 chain in a given range every `x` blocks
* Modify `run` function to accommodate changes
* Minor fixes
* Fix formatting
* Initial commit. web3 api working.
* Tidied up lib. Add function for fetching logs.
* Refactor with `Eth1DataFetcher` trait
* Add parsing for deposit contract logs and get_eth1_data function
* Add `get_eth1_votes` function
* Refactor to cache Eth1Data
* Fix merge conflicts and minor refactorings
* Rename Eth1Cache to Eth1DataCache
* Refactor events subscription
* Add deposits module to interface with BeaconChain deposits
* Remove utils
* Rename to types.rs and add trait constraints to Eth1DataFetcher
* Confirm to trait constraints. Make Web3DataFetcher cloneable
* Make fetcher object member of deposit and eth1_data cache and other fixes
* Fix update_cache function
* Move fetch_eth1_data to impl block
* Fix deposit tests
* Create Eth1 object for interfacing with Beacon chain
* Add `run` function for running update_cache and subscribe_deposit_logs tasks
* Add logging
* Run `cargo fmt` and make tests pass
* Convert sync functions to async
* Add timeouts to web3 functions
* Return futures from cache functions
* Add failed chaining of futures
* Working cache updation
* Clean up tests and `update_cache` function
* Refactor `get_eth1_data` functions to work with future returning functions
* Refactor eth1 `run` function to work with modified `update_cache` api
* Minor changes
* Add distance parameter to `update_cache`
* Fix tests and other minor fixes
* Working integration with cache and deposits
* Add merkle_tree construction, proof generation and verification code
* Add function to construct and fetch Deposits for BeaconNode
* Add error handling
* Import ssz
* Add error handling to eth1 cache and fix minor errors
* Run rustfmt
* Fix minor bug
* Rename Eth1Error and change to Result<T>
* Change deposit fetching mechanism from notification based to poll based
* Add deposits from eth1 chain in a given range every `x` blocks
* Modify `run` function to accommodate changes
* Minor fixes
* Fix formatting
* Fix merge issue
* Refactor with `Config` struct. Remote `ContractConfig`
* Rename eth1_chain crate to eth1
* Rename files and read abi file using `fs::read`
* Move eth1 to lib
* Remove unnecessary mutability constraint
* Add `Web3Backend` for returning actual eth1 data
* Refactor `get_eth1_votes` to return a Result
* Delete `eth1_chain` crate
* Return `Result` from `get_deposits`
* Fix range of deposits to return to beacon chain
* Add `get_block_height_by_hash` trait function
* Add naive method for getting `previous_eth1_distance`
* Add eth1 config params to main config
* Add instructions for setting up eth1 testing environment
* Add build script to fetch deposit contract abi
* Contract ABI is part of compiled binary
* Fix minor bugs
* Move docs to lib
* Add timeout to config
* Remove print statements
* Change warn to error
* Fix typos
* Removed prints in test and get timeout value from config
* Fixed error types
* Added logging to web3_fetcher
* Refactor for modified web3 api
* Fix minor stuff
* Add build script
* Tidy, hide eth1 integration tests behind flag
* Add http crate
* Add first stages of eth1_test_rig
* Fix deposits on test rig
* Fix bug with deposit count method
* Add block hash getter to http eth1
* Clean eth1 http crate and tests
* Add script to start ganache
* Adds deposit tree to eth1-http
* Extend deposit tree tests
* Tidy tests in eth1-http
* Add more detail to get block request
* Add block cache to eth1-http
* Rename deposit tree to deposit cache
* Add inital updating to eth1-http
* Tidy updater
* Fix compile bugs in tests
* Adds an Eth1DataCache builder
* Reorg eth1-http files
* Add (failing) tests for eth1 updater
* Rename files, fix bug in eth1-http
* Ensure that ganache timestamps are increasing
* Fix bugs with getting eth1data ancestors
* Improve eth1 testing, fix bugs
* Add truncate method to block cache
* Add pruning to block cache update process
* Add tests for block pruning
* Allow for dropping an expired cache.
* Add more comments
* Add first compiling version of deposit updater
* Add common fn for getting range of required blocks
* Add passing deposit update test
* Improve tests
* Fix block pruning bug
* Add tests for running two updates at once
* Add updater services to eth1
* Add deposit collection to beacon chain
* Add incomplete builder experiments
* Add first working version of beacon chain builder
* Update test harness to new beacon chain type
* Rename builder file, tidy
* Add first working client builder
* Progress further on client builder
* Update becaon node binary to use client builder
* Ensure release tests compile
* Remove old eth1 crate
* Add first pass of new lighthouse binary
* Fix websocket server startup
* Remove old binary code from beacon_node crate
* Add first working beacon node tests
* Add genesis crate, new eth1 cache_2
* Add Serivce to Eth1Cache
* Refactor with general eth1 improvements
* Add passing genesis test
* Tidy, add comments
* Add more comments to eth1 service
* Add further eth1 progress
* Fix some bugs with genesis
* Fix eth1 bugs, make eth1 linking more efficient
* Shift logic in genesis service
* Add more comments to genesis service
* Add gzip, max request values, timeouts to http
* Update testnet parameters to suit goerli testnet
* Add ability to vary Fork, fix custom spec
* Be more explicit about deposit fork version
* Start adding beacon chain eth1 option
* Add more flexibility to prod client
* Further runtime refactoring
* Allow for starting from store
* Add bootstrapping to client config
* Add remote_beacon_node crate
* Update eth1 service for more configurability
* Update eth1 tests to use less runtimes
* Patch issues with tests using too many files
* Move dummy eth1 backend flag
* Ensure all tests pass
* Add ganache-cli to Dockerfile
* Use a special docker hub image for testing
* Appease clippy
* Move validator client into lighthouse binary
* Allow starting with dummy eth1 backend
* Improve logging
* Fix dummy eth1 backend from cli
* Add extra testnet command
* Ensure consistent spec in beacon node
* Update eth1 rig to work on goerli
* Tidy lcli, start adding support for yaml config
* Add incomplete YamlConfig struct
* Remove efforts at YamlConfig
* Add incomplete eth1 voting. Blocked on spec issues
* Add (untested) first pass at eth1 vote algo
* Add tests for winning vote
* Add more tests for eth1 chain
* Add more eth1 voting tests
* Added more eth1 voting testing
* Change test name
* Add more tests to eth1 chain
* Tidy eth1 generics, add more tests
* Improve comments
* Tidy beacon_node tests
* Tidy, rename JsonRpc.. to Caching..
* Tidy voting logic
* Tidy builder docs
* Add comments, tidy eth1
* Add more comments to eth1
* Fix bug with winning_vote
* Add doc comments to the `ClientBuilder`
* Remove commented-out code
* Improve `ClientBuilder` docs
* Add comments to client config
* Add decoding test for `ClientConfig`
* Remove unused `DepositSet` struct
* Tidy `block_cache`
* Remove commented out lines
* Remove unused code in `eth1` crate
* Remove old validator binary `main.rs`
* Tidy, fix tests compile error
* Add initial tests for get_deposits
* Remove dead code in eth1_test_rig
* Update TestingDepositBuilder
* Add testing for getting eth1 deposits
* Fix duplicate rand dep
* Remove dead code
* Remove accidentally-added files
* Fix comment in eth1_genesis_service
* Add .gitignore for eth1_test_rig
* Fix bug in eth1_genesis_service
* Remove dead code from eth2_config
* Fix tabs/spaces in root Cargo.toml
* Tidy eth1 crate
* Allow for re-use of eth1 service after genesis
* Update docs for new CLI
* Change README gif
* Tidy eth1 http module
* Tidy eth1 service
* Tidy environment crate
* Remove unused file
* Tidy, add comments
* Remove commented-out code
* Address majority of Michael's comments
* Address other PR comments
* Add link to issue alongside TODO
