## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/4291, part of #3613.
## Proposed Changes
- Implement the `el_offline` field on `/eth/v1/node/syncing`. We set `el_offline=true` if:
- The EL's internal status is `Offline` or `AuthFailed`, _or_
- The most recent call to `newPayload` resulted in an error (more on this in a moment).
- Use the `el_offline` field in the VC to mark nodes with offline ELs as _unsynced_. These nodes will still be used, but only after synced nodes.
- Overhaul the usage of `RequireSynced` so that `::No` is used almost everywhere. The `--allow-unsynced` flag was broken and had the opposite effect to intended, so it has been deprecated.
- Add tests for the EL being offline on the upcheck call, and being offline due to the newPayload check.
## Why track `newPayload` errors?
Tracking the EL's online/offline status is too coarse-grained to be useful in practice, because:
- If the EL is timing out to some calls, it's unlikely to timeout on the `upcheck` call, which is _just_ `eth_syncing`. Every failed call is followed by an upcheck [here](693886b941/beacon_node/execution_layer/src/engines.rs (L372-L380)), which would have the effect of masking the failure and keeping the status _online_.
- The `newPayload` call is the most likely to time out. It's the call in which ELs tend to do most of their work (often 1-2 seconds), with `forkchoiceUpdated` usually returning much faster (<50ms).
- If `newPayload` is failing consistently (e.g. timing out) then this is a good indication that either the node's EL is in trouble, or the network as a whole is. In the first case validator clients _should_ prefer other BNs if they have one available. In the second case, all of their BNs will likely report `el_offline` and they'll just have to proceed with trying to use them.
## Additional Changes
- Add utility method `ForkName::latest` which is quite convenient for test writing, but probably other things too.
- Delete some stale comments from when we used to support multiple execution nodes.
## Issue Addressed
#4233
## Proposed Changes
Remove the `best_justified_checkpoint` from the `PersistedForkChoiceStore` type as it is now unused.
Additionally, remove the `Option`'s wrapping the `justified_checkpoint` and `finalized_checkpoint` fields on `ProtoNode` which were only present to facilitate a previous migration.
Include the necessary code to facilitate the migration to a new DB schema.
* Update Engine API to Latest
* Get Mock EE Working
* Fix Mock EE
* Update Engine API Again
* Rip out get_blobs_bundle Stuff
* Fix Test Harness
* Fix Clippy Complaints
* Fix Beacon Chain Tests
## Proposed Changes
This change attempts to prevent failed re-orgs by:
1. Lowering the re-org cutoff from 2s to 1s. This is informed by a failed re-org attempted by @yorickdowne's node. The failed block was requested in the 1.5-2s window due to a Vouch failure, and failed to propagate to the majority of the network before the attestation deadline at 4s.
2. Allow users to adjust their re-org cutoff depending on observed network conditions and their risk profile. The static 2 second cutoff was too rigid.
3. Add a `--proposer-reorg-disallowed-offsets` flag which can be used to prohibit reorgs at certain slots. This is intended to help workaround an issue whereby reorging blocks at slot 1 are currently taking ~1.6s to propagate on gossip rather than ~500ms. This is suspected to be due to a cache miss in current versions of Prysm, which should be fixed in their next release.
## Additional Info
I'm of two minds about removing the `shuffling_stable` check which checks for blocks at slot 0 in the epoch. If we removed it users would be able to configure Lighthouse to try reorging at slot 0, which likely wouldn't work very well due to interactions with the proposer index cache. I think we could leave it for now and revisit it later.
## Issue Addressed
#4146
## Proposed Changes
Removes the `ExecutionOptimisticForkVersionedResponse` type and the associated Beacon API endpoint which is now deprecated. Also removes the test associated with the endpoint.
> This is currently a WIP and all features are subject to alteration or removal at any time.
## Overview
The successor to #2873.
Contains the backbone of `beacon.watch` including syncing code, the initial API, and several core database tables.
See `watch/README.md` for more information, requirements and usage.
## Issue Addressed
#3708
## Proposed Changes
- Add `is_finalized_block` method to `BeaconChain` in `beacon_node/beacon_chain/src/beacon_chain.rs`.
- Add `is_finalized_state` method to `BeaconChain` in `beacon_node/beacon_chain/src/beacon_chain.rs`.
- Add `fork_and_execution_optimistic_and_finalized` in `beacon_node/http_api/src/state_id.rs`.
- Add `ExecutionOptimisticFinalizedForkVersionedResponse` type in `consensus/types/src/fork_versioned_response.rs`.
- Add `execution_optimistic_finalized_fork_versioned_response`function in `beacon_node/http_api/src/version.rs`.
- Add `ExecutionOptimisticFinalizedResponse` type in `common/eth2/src/types.rs`.
- Add `add_execution_optimistic_finalized` method in `common/eth2/src/types.rs`.
- Update API response methods to include finalized.
- Remove `execution_optimistic_fork_versioned_response`
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Which issue # does this PR address?
https://github.com/sigp/lighthouse/issues/3669
## Proposed Changes
Please list or describe the changes introduced by this PR.
- A new API to fetch fork choice data, as specified [here](https://github.com/ethereum/beacon-APIs/pull/232)
- A new integration test to test the new API
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
- `extra_data` field specified in the beacon-API spec is not implemented, please let me know if I should instead.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
Add support for ipv6 and dual stack in lighthouse.
## Proposed Changes
From an user perspective, now setting an ipv6 address, optionally configuring the ports should feel exactly the same as using an ipv4 address. If listening over both ipv4 and ipv6 then the user needs to:
- use the `--listen-address` two times (ipv4 and ipv6 addresses)
- `--port6` becomes then required
- `--discovery-port6` can now be used to additionally configure the ipv6 udp port
### Rough list of code changes
- Discovery:
- Table filter and ip mode set to match the listening config.
- Ipv6 address, tcp port and udp port set in the ENR builder
- Reported addresses now check which tcp port to give to libp2p
- LH Network Service:
- Can listen over Ipv6, Ipv4, or both. This uses two sockets. Using mapped addresses is disabled from libp2p and it's the most compatible option.
- NetworkGlobals:
- No longer stores udp port since was not used at all. Instead, stores the Ipv4 and Ipv6 TCP ports.
- NetworkConfig:
- Update names to make it clear that previous udp and tcp ports in ENR were Ipv4
- Add fields to configure Ipv6 udp and tcp ports in the ENR
- Include advertised enr Ipv6 address.
- Add type to model Listening address that's either Ipv4, Ipv6 or both. A listening address includes the ip, udp port and tcp port.
- UPnP:
- Kept only for ipv4
- Cli flags:
- `--listen-addresses` now can take up to two values
- `--port` will apply to ipv4 or ipv6 if only one listening address is given. If two listening addresses are given it will apply only to Ipv4.
- `--port6` New flag required when listening over ipv4 and ipv6 that applies exclusively to Ipv6.
- `--discovery-port` will now apply to ipv4 and ipv6 if only one listening address is given.
- `--discovery-port6` New flag to configure the individual udp port of ipv6 if listening over both ipv4 and ipv6.
- `--enr-udp-port` Updated docs to specify that it only applies to ipv4. This is an old behaviour.
- `--enr-udp6-port` Added to configure the enr udp6 field.
- `--enr-tcp-port` Updated docs to specify that it only applies to ipv4. This is an old behaviour.
- `--enr-tcp6-port` Added to configure the enr tcp6 field.
- `--enr-addresses` now can take two values.
- `--enr-match` updated behaviour.
- Common:
- rename `unused_port` functions to specify that they are over ipv4.
- add functions to get unused ports over ipv6.
- Testing binaries
- Updated code to reflect network config changes and unused_port changes.
## Additional Info
TODOs:
- use two sockets in discovery. I'll get back to this and it's on https://github.com/sigp/discv5/pull/160
- lcli allow listening over two sockets in generate_bootnodes_enr
- add at least one smoke flag for ipv6 (I have tested this and works for me)
- update the book
## Proposed Changes
Two tiny updates to satisfy Clippy 1.68
Plus refactoring of the `http_api` into less complex types so the compiler can chew and digest them more easily.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Closes#3896Closes#3998Closes#3700
## Proposed Changes
- Optimise the calculation of withdrawals for payload attributes by avoiding state clones, avoiding unnecessary state advances and reading from the snapshot cache if possible.
- Use the execution layer's payload attributes cache to avoid re-calculating payload attributes. I actually implemented a new LRU cache just for withdrawals but it had the exact same key and most of the same data as the existing payload attributes cache, so I deleted it.
- Add a new SSE event that fires when payloadAttributes are calculated. This is useful for block builders, a la https://github.com/ethereum/beacon-APIs/issues/244.
- Add a new CLI flag `--always-prepare-payload` which forces payload attributes to be sent with every fcU regardless of connected proposers. This is intended for use by builders/relays.
For maximum effect, the flags I've been using to run Lighthouse in "payload builder mode" are:
```
--always-prepare-payload \
--prepare-payload-lookahead 12000 \
--suggested-fee-recipient 0x0000000000000000000000000000000000000000
```
The fee recipient is required so Lighthouse has something to pack in the payload attributes (it can be ignored by the builder). The lookahead causes fcU to be sent at the start of every slot rather than at 8s. As usual, fcU will also be sent after each change of head block. I think this combination is sufficient for builders to build on all viable heads. Often there will be two fcU (and two payload attributes) sent for the same slot: one sent at the start of the slot with the head from `n - 1` as the parent, and one sent after the block arrives with `n` as the parent.
Example usage of the new event stream:
```bash
curl -N "http://localhost:5052/eth/v1/events?topics=payload_attributes"
```
## Additional Info
- [x] Tests added by updating the proposer re-org tests. This has the benefit of testing the proposer re-org code paths with withdrawals too, confirming that the new changes don't interact poorly.
- [ ] Benchmarking with `blockdreamer` on devnet-7 showed promising results but I'm yet to do a comparison to `unstable`.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
* Add first efforts at broadcast
* Tidy
* Move broadcast code to client
* Progress with broadcast impl
* Rename to address change
* Fix compile errors
* Use `while` loop
* Tidy
* Flip broadcast condition
* Switch to forgetting individual indices
* Always broadcast when the node starts
* Refactor into two functions
* Add testing
* Add another test
* Tidy, add more testing
* Tidy
* Add test, rename enum
* Rename enum again
* Tidy
* Break loop early
* Add V15 schema migration
* Bump schema version
* Progress with migration
* Update beacon_node/client/src/address_change_broadcast.rs
Co-authored-by: Michael Sproul <micsproul@gmail.com>
* Fix typo in function name
---------
Co-authored-by: Michael Sproul <micsproul@gmail.com>
* Use Local Payload if More Profitable than Builder
* Rename clone -> clone_from_ref
* Minimize Clones of GetPayloadResponse
* Cleanup & Fix Tests
* Added Tests for Payload Choice by Profit
* Fix Outdated Comments
* Import BLS to execution changes before Capella
* Test for BLS to execution change HTTP API
* Pack BLS to execution changes in LIFO order
* Remove unused var
* Clippy
I've needed to do this work in order to do some episub testing.
This version of libp2p has not yet been released, so this is left as a draft for when we wish to update.
Co-authored-by: Diva M <divma@protonmail.com>
## Proposed Changes
With proposer boosting implemented (#2822) we have an opportunity to re-org out late blocks.
This PR adds three flags to the BN to control this behaviour:
* `--disable-proposer-reorgs`: turn aggressive re-orging off (it's on by default).
* `--proposer-reorg-threshold N`: attempt to orphan blocks with less than N% of the committee vote. If this parameter isn't set then N defaults to 20% when the feature is enabled.
* `--proposer-reorg-epochs-since-finalization N`: only attempt to re-org late blocks when the number of epochs since finalization is less than or equal to N. The default is 2 epochs, meaning re-orgs will only be attempted when the chain is finalizing optimally.
For safety Lighthouse will only attempt a re-org under very specific conditions:
1. The block being proposed is 1 slot after the canonical head, and the canonical head is 1 slot after its parent. i.e. at slot `n + 1` rather than building on the block from slot `n` we build on the block from slot `n - 1`.
2. The current canonical head received less than N% of the committee vote. N should be set depending on the proposer boost fraction itself, the fraction of the network that is believed to be applying it, and the size of the largest entity that could be hoarding votes.
3. The current canonical head arrived after the attestation deadline from our perspective. This condition was only added to support suppression of forkchoiceUpdated messages, but makes intuitive sense.
4. The block is being proposed in the first 2 seconds of the slot. This gives it time to propagate and receive the proposer boost.
## Additional Info
For the initial idea and background, see: https://github.com/ethereum/consensus-specs/pull/2353#issuecomment-950238004
There is also a specification for this feature here: https://github.com/ethereum/consensus-specs/pull/3034
Co-authored-by: Michael Sproul <micsproul@gmail.com>
Co-authored-by: pawan <pawandhananjay@gmail.com>
This PR adds some health endpoints for the beacon node and the validator client.
Specifically it adds the endpoint:
`/lighthouse/ui/health`
These are not entirely stable yet. But provide a base for modification for our UI.
These also may have issues with various platforms and may need modification.
## Issue Addressed
N/A
## Proposed Changes
With https://github.com/sigp/lighthouse/pull/3214 we made it such that you can either have 1 auth endpoint or multiple non auth endpoints. Now that we are post merge on all networks (testnets and mainnet), we cannot progress a chain without a dedicated auth execution layer connection so there is no point in having a non-auth eth1-endpoint for syncing deposit cache.
This code removes all fallback related code in the eth1 service. We still keep the single non-auth endpoint since it's useful for testing.
## Additional Info
This removes all eth1 fallback related metrics that were relevant for the monitoring service, so we might need to change the api upstream.
## Issue Addressed
NA
## Proposed Changes
This PR removes duplicated block root computation.
Computing the `SignedBeaconBlock::canonical_root` has become more expensive since the merge as we need to compute the merke root of each transaction inside an `ExecutionPayload`.
Computing the root for [a mainnet block](https://beaconcha.in/slot/4704236) is taking ~10ms on my i7-8700K CPU @ 3.70GHz (no sha extensions). Given that our median seen-to-imported time for blocks is presently 300-400ms, removing a few duplicated block roots (~30ms) could represent an easy 10% improvement. When we consider that the seen-to-imported times include operations *after* the block has been placed in the early attester cache, we could expect the 30ms to be more significant WRT our seen-to-attestable times.
## Additional Info
NA
## Issue Addressed
https://github.com/ethereum/beacon-APIs/pull/222
## Proposed Changes
Update Lighthouse's randao verification API to match the `beacon-APIs` spec. We implemented the API before spec stabilisation, and it changed slightly in the course of review.
Rather than a flag `verify_randao` taking a boolean value, the new API uses a `skip_randao_verification` flag which takes no argument. The new spec also requires the randao reveal to be present and equal to the point-at-infinity when `skip_randao_verification` is set.
I've also updated the `POST /lighthouse/analysis/block_rewards` API to take blinded blocks as input, as the execution payload is irrelevant and we may want to assess blocks produced by builders.
## Additional Info
This is technically a breaking change, but seeing as I suspect I'm the only one using these parameters/APIs, I think we're OK to include this in a patch release.
## Issue Addressed
Resolves https://github.com/sigp/lighthouse/issues/3517
## Proposed Changes
Adds a `--builder-profit-threshold <wei value>` flag to the BN. If an external payload's value field is less than this value, the local payload will be used. The value of the local payload will not be checked (it can't really be checked until the engine API is updated to support this).
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
As we've seen on Prater, there seems to be a correlation between these messages
```
WARN Not enough time for a discovery search subnet_id: ExactSubnet { subnet_id: SubnetId(19), slot: Slot(3742336) }, service: attestation_service
```
... and nodes falling 20-30 slots behind the head for short periods. These nodes are running ~20k Prater validators.
After running some metrics, I can see that the `network_recv` channel is processing ~250k `AttestationSubscribe` messages per minute. It occurred to me that perhaps the `AttestationSubscribe` messages are "washing out" the `SendRequest` and `SendResponse` messages. In this PR I separate the `AttestationSubscribe` and `SyncCommitteeSubscribe` messages into their own queue so the `tokio::select!` in the `NetworkService` can still process the other messages in the `network_recv` channel without necessarily having to clear all the subscription messages first.
~~I've also added filter to the HTTP API to prevent duplicate subscriptions going to the network service.~~
## Additional Info
- Currently being tested on Prater
## Issue Addressed
#3465
## Proposed Changes
Filter out any validator registrations for validators that are not `active` or `pending`. I'm adding this filtering the beacon node because all the information is readily available there. In other parts of the VC we are usually sending per-validator requests based on duties from the BN. And duties will only be provided for active validators so we don't have this type of filtering elsewhere in the VC.
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
Resolves#3388Resolves#2638
## Proposed Changes
- Return the `BellatrixPreset` on `/eth/v1/config/spec` by default.
- Allow users to opt out of this by providing `--http-spec-fork=altair` (unless there's a Bellatrix fork epoch set).
- Add the Altair constants from #2638 and make serving the constants non-optional (the `http-disable-legacy-spec` flag is deprecated).
- Modify the VC to only read the `Config` and not to log extra fields. This prevents it from having to muck around parsing the `ConfigAndPreset` fields it doesn't need.
## Additional Info
This change is backwards-compatible for the VC and the BN, but is marked as a breaking change for the removal of `--http-disable-legacy-spec`.
I tried making `Config` a `superstruct` too, but getting the automatic decoding to work was a huge pain and was going to require a lot of hacks, so I gave up in favour of keeping the default-based approach we have now.
## Issue Addressed
Resolves https://github.com/sigp/lighthouse/issues/3394
Adds a check in `is_healthy` about whether the head is optimistic when choosing whether to use the builder network.
Co-authored-by: realbigsean <sean@sigmaprime.io>
