## Issue Addressed
NA
## Proposed Changes
Bump versions to v3.0.0
## Additional Info
- ~~Blocked on #3439~~
- ~~Blocked on #3459~~
- ~~Blocked on #3463~~
- ~~Blocked on #3462~~
- ~~Requires further testing~~
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Proposed Changes
Enable multiple database backends for the slasher, either MDBX (default) or LMDB. The backend can be selected using `--slasher-backend={lmdb,mdbx}`.
## Additional Info
In order to abstract over the two library's different handling of database lifetimes I've used `Box::leak` to give the `Environment` type a `'static` lifetime. This was the only way I could think of using 100% safe code to construct a self-referential struct `SlasherDB`, where the `OpenDatabases` refers to the `Environment`. I think this is OK, as the `Environment` is expected to live for the life of the program, and both database engines leave the database in a consistent state after each write. The memory claimed for memory-mapping will be freed by the OS and appropriately flushed regardless of whether the `Environment` is actually dropped.
We are depending on two `sigp` forks of `libmdbx-rs` and `lmdb-rs`, to give us greater control over MDBX OS support and LMDB's version.
## Issue Addressed
Which issue # does this PR address?
## Proposed Changes
Please list or describe the changes introduced by this PR.
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
N/A
## Proposed Changes
Make simulator merge compatible. Adds a `--post_merge` flag to the eth1 simulator that enables a ttd and simulates the merge transition. Uses the `MockServer` in the execution layer test utils to simulate a dummy execution node.
Adds the merge transition simulation to CI.
## Description
Add a new lint to CI that attempts to detect calls to functions like `block_on` from async execution contexts. This lint was written from scratch exactly for this purpose, on my fork of Clippy: https://github.com/michaelsproul/rust-clippy/tree/disallow-from-async
## Additional Info
- I've successfully detected the previous two issues we had with `block_on` by running the linter on the commits prior to each of these PRs: https://github.com/sigp/lighthouse/pull/3165, https://github.com/sigp/lighthouse/pull/3199.
- The lint runs on CI with `continue-on-error: true` so that if it fails spuriously it won't block CI.
- I think it would be good to merge this PR before https://github.com/sigp/lighthouse/pull/3244 so that we can lint the extensive executor-related changes in that PR.
- I aim to upstream the lint to Clippy, at which point building a custom version of Clippy from my fork will no longer be necessary. I imagine this will take several weeks or months though, because the code is currently a bit hacky and will need some renovations to pass review.
## Issue Addressed
This fixes the low-hanging Clippy lints introduced in Rust 1.61 (due any hour now). It _ignores_ one lint, because fixing it requires a structural refactor of the validator client that needs to be done delicately. I've started on that refactor and will create another PR that can be reviewed in more depth in the coming days. I think we should merge this PR in the meantime to unblock CI.
## Issue Addressed
Attempt to fix CI
## Proposed Changes
- ~~install `node-gyp-build` which should look for prebuilt binaries for `@truffle-suite/bigint_buffer`. This should make it so we don't have to build it directly. See: https://github.com/trufflesuite/ganache/pull/1414~~ this didn't work
- This also uses the `setup-node` action because it includes caching. Sort of a shot in the dark, but the ganache github repo uses it and the failures seem to be for missing files in a node cache
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
Hopefully makes windows ganache installation more reliable.
## Proposed Changes
- use `chocolatey` to install windows build tools. This seems to often be the prescribed solution for `node gyp` issues. `chocolatey` is used here because `npm install --global --production windows-build-tools` hangs in github actions
## Additional Info
I still haven't found why the prior installation technique would sometimes work, the `windows-2019` environments seem to be identical across successes and failures. I think this should be re-run a few times to see if it can consistently pass
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Proposed Changes
Set a minimum supported Rust version (MSRV) in the `Cargo.toml` for the Lighthouse binary so that attempts to compile it with an outdated compiler fail immediately with a clear error.
To ensure that the codebase builds with the MSRV I've also added a Github actions job that runs `cargo check` using the MSRV extracted from `Cargo.toml`. This will force us to keep it up to date.
I opted to use `cargo check` rather than Clippy because Clippy frequently introduces new lints that we adopt, so our MSRV for Clippy is usually the most recent Rust version, while the MSRV for building Lighthouse is older.
## Issue Addressed
As discussed on last-night's consensus call, the testnets next week will target the [Kiln Spec v2](https://hackmd.io/@n0ble/kiln-spec).
Presently, we support Kiln V1. V2 is backwards compatible, except for renaming `random` to `prev_randao` in:
- https://github.com/ethereum/execution-apis/pull/180
- https://github.com/ethereum/consensus-specs/pull/2835
With this PR we'll no longer be compatible with the existing Kintsugi and Kiln testnets, however we'll be ready for the testnets next week. I raised this breaking change in the call last night, we are all keen to move forward and break things.
We now target the [`merge-kiln-v2`](https://github.com/MariusVanDerWijden/go-ethereum/tree/merge-kiln-v2) branch for interop with Geth. This required adding the `--http.aauthport` to the tester to avoid a port conflict at startup.
### Changes to exec integration tests
There's some change in the `merge-kiln-v2` version of Geth that means it can't compile on a vanilla Github runner. Bumping the `go` version on the runner solved this issue.
Whilst addressing this, I refactored the `testing/execution_integration` crate to be a *binary* rather than a *library* with tests. This means that we don't need to run the `build.rs` and build Geth whenever someone runs `make lint` or `make test-release`. This is nice for everyday users, but it's also nice for CI so that we can have a specific runner for these tests and we don't need to ensure *all* runners support everything required to build all execution clients.
## More Info
- [x] ~~EF tests are failing since the rename has broken some tests that reference the old field name. I have been told there will be new tests released in the coming days (25/02/22 or 26/02/22).~~
## Issue Addressed
Timeouts due to Windows builds running for 2h 20m.
## Proposed Changes
* Increase Bors timeout to 3h
* Refine the target branch check so that it will pass when we make PRs to feature branches. This is just an extra change I've been meaning to sneak in for a while.
## Additional Info
* I think it would also be cool to try caching for CI again, but that's a separate issue and we'll still need the long timeout on a cache miss.
## Issue Addressed
NA
## Proposed Changes
This PR extends #3018 to address my review comments there and add automated integration tests with Geth (and other implementations, in the future).
I've also de-duplicated the "unused port" logic by creating an `common/unused_port` crate.
## Additional Info
I'm not sure if we want to merge this PR, or update #3018 and merge that. I don't mind, I'm primarily opening this PR to make sure CI works.
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
## Issue Addressed
Closes#2938
## Proposed Changes
* Build and publish images with a `-modern` suffix which enable CPU optimizations for modern hardware.
* Add docs for the plethora of available images!
* Unify all the Docker workflows in `docker.yml` (including for tagged releases).
## Additional Info
The `Dockerfile` is no longer used by our Docker Hub builds, as we use `cross` and a generic approach for ARM and x86. There's a new CI job `docker-build-from-source` which tests the `Dockerfile` without publishing anything.
## Issue Addressed
Closes#2286Closes#2538Closes#2342
## Proposed Changes
Part II of major slasher optimisations after #2767
These changes will be backwards-incompatible due to the move to MDBX (and the schema change) 😱
* [x] Shrink attester keys from 16 bytes to 7 bytes.
* [x] Shrink attester records from 64 bytes to 6 bytes.
* [x] Separate `DiskConfig` from regular `Config`.
* [x] Add configuration for the LRU cache size.
* [x] Add a "migration" that deletes any legacy LMDB database.
## Issue Addressed
This is related to #1926 and #1712.
## Proposed Changes
This PR adds a test that make sure that the used dependencies can be vendored.
Being able to vendor the dependencies is important for archival and repdroducibility purpose.
It's also required to package lighthouse for some Linux distributions. Specifically [NixOS](https://nixos.org/) and [Yocto](https://www.yoctoproject.org/).
## Additional Info
This PR only adds the test, it doesn't clean up the dependencies yet. That's why it is in draft.
## Issue Addressed
NA
## Proposed Changes
Adds some more testing for Altair to the op pool. Credits to @michaelsproul for some appropriated efforts here.
## Additional Info
NA
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Resolves#2069
## Proposed Changes
- Adds a `--doppelganger-detection` flag
- Adds a `lighthouse/seen_validators` endpoint, which will make it so the lighthouse VC is not interopable with other client beacon nodes if the `--doppelganger-detection` flag is used, but hopefully this will become standardized. Relevant Eth2 API repo issue: https://github.com/ethereum/eth2.0-APIs/issues/64
- If the `--doppelganger-detection` flag is used, the VC will wait until the beacon node is synced, and then wait an additional 2 epochs. The reason for this is to make sure the beacon node is able to subscribe to the subnets our validators should be attesting on. I think an alternative would be to have the beacon node subscribe to all subnets for 2+ epochs on startup by default.
## Additional Info
I'd like to add tests and would appreciate feedback.
TODO: handle validators started via the API, potentially make this default behavior
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Proposed Changes
Implement the consensus changes necessary for the upcoming Altair hard fork.
## Additional Info
This is quite a heavy refactor, with pivotal types like the `BeaconState` and `BeaconBlock` changing from structs to enums. This ripples through the whole codebase with field accesses changing to methods, e.g. `state.slot` => `state.slot()`.
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
`make lint` failing on rust 1.53.0.
## Proposed Changes
1.53.0 updates
## Additional Info
I haven't figure out why yet, we were now hitting the recursion limit in a few crates. So I had to add `#![recursion_limit = "256"]` in a few places
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Windows incompatibility.
## Proposed Changes
On windows, lighthouse needs to default to STDIN as tty doesn't exist. Also Windows uses ACLs for file permissions. So to mirror chmod 600, we will remove every entry in a file's ACL and add only a single SID that is an alias for the file owner.
Beyond that, there were several changes made to different unit tests because windows has slightly different error messages as well as frustrating nuances around killing a process :/
## Additional Info
Tested on my Windows VM and it appears to work, also compiled & tested on Linux with these changes. Permissions look correct on both platforms now. Just waiting for my validator to activate on Prater so I can test running full validator client on windows.
Co-authored-by: ethDreamer <37123614+ethDreamer@users.noreply.github.com>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
NA
## Proposed Changes
Rust 1.50 has landed 🎉
The shiny new `clippy` peers down upon us mere mortals with disgust. Brutish peasants wrapping our `usize`s in superfluous `Option`s... tsk tsk.
I've performed the goat sacrifice and corrected our evil ways in this PR. Tonight we shall pray that Github Actions bestows the almighty green tick upon us.
## Additional Info
NA
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Attempt to prevent accidental merges to `stable` due to GitHub's default behaviour of opening PRs against it.
I've intentionally opened this PR against `stable` to test the functionality ;)
## Issue Addressed
N/A
## Proposed Changes
I didn't realize the `PORTABLE` env variable is only picked up by `install` in the `Makefile` so we are still getting `SIGILL`s:
https://github.com/sigp/lighthouse/runs/1565004525?check_suite_focus=true
## Additional Info
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
NA
## Proposed Changes
Fixes problems with slot times below 1 second which got revealed by running the syncing simulator with the default speedup time.
## Issue Addressed
N/A
## Proposed Changes
Add some caching to the test suite and to the aarch64 cross-compile in the docker build.
## Additional Info
Cache hits only occur if the Cargo.lock file is unchanged, Github Actions runner OS matches, and the cache is "in scope". Some documentation on github actions cache scoping is here:
https://docs.github.com/en/free-pro-team@latest/actions/guides/caching-dependencies-to-speed-up-workflows#matching-a-cache-key
I'm not sure how frequently we'll get cache hits, I imagine only on smaller PR's or updates to the same PR. And there is a cache size limit that we may end up reaching quickly. But Github actions handles evictions if we go over that limit.
Not sure how much of an impact this will end up having but I don't really see a downside to trying it out.
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
N/A
## Proposed Changes
Remove the MacOs tests. They routinely fail, causing bors to retry and slowing down the whole merge process.
## Additional Info
N/A
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Resolves#1100
## Proposed Changes
* Implement the `SafeArith` trait for `Slot` and `Epoch`, so that methods like `safe_add` become available.
* Tweak the `SafeArith` trait to allow a different `Rhs` type (analagous to `std::ops::Add`, etc).
* Add a `legacy-arith` feature to `types` and `state_processing` that conditionally enables implementations of
the `std` ops with saturating semantics.
* Check compilation of `types` and `state_processing` _without_ `legacy-arith` on CI,
thus guaranteeing that they only use the `SafeArith` primitives 🎉
## Additional Info
The `legacy-arith` feature gets turned on by all higher-level crates that depend on `state_processing` or `types`, thus allowing the beacon chain, networking, and other components to continue to rely on the availability of ops like `+`, `-`, `*`, etc.
**This is a consensus-breaking change**, but brings us in line with the spec, and our incompatibilities shouldn't have been reachable with any valid configuration of Eth2 parameters.
## Issue Addressed
NA
## Proposed Changes
- Refactor the `bls` crate to support multiple BLS "backends" (e.g., milagro, blst, etc).
- Removes some duplicate, unused code in `common/rest_types/src/validator.rs`.
- Removes the old "upgrade legacy keypairs" functionality (these were unencrypted keys that haven't been supported for a few testnets, no one should be using them anymore).
## Additional Info
Most of the files changed are just inconsequential changes to function names.
## TODO
- [x] Optimization levels
- [x] Infinity point: https://github.com/supranational/blst/issues/11
- [x] Ensure milagro *and* blst are tested via CI
- [x] What to do with unsafe code?
- [x] Test infinity point in signature sets
## Proposed Changes
CI is failing on PRs because of a regression in nightly Rust. This change forces `rustup` to install a version of the nightly compiler that can at least build `rustfmt`, which should reduce the frequency of this happening.
## Additional Info
Example failing run: https://github.com/sigp/lighthouse/runs/896694659
Alternatively, we could allow CI to succeed even when `cargo-udeps` fails, but I think we should avoid doing that unless we really have to.
## Issue Addressed
Prevent CI from succeeding when there are warnings. Code can still be built and tested with warnings locally, but CI may fail during a Rust update (which is fine IMO).
## Proposed Changes
* Deny warnings for all stable compiler jobs on CI (excludes `cargo udeps`, which runs under nightly)
* Fix the warnings currently on `master` related to unnecessary `mem::replace`
* Add mac build to CI
* Always return an error for Health when not linux
* Change macos workflow
* Rename macos tests
* Disable health API test on Mac
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
* Fix parallelism bug in exit processing
Also:
* Remove parallelism for all other operations except deposit merkle proofs
* Improve exit tests
* Fix broken attestation test
Closes#1090
* Allow for generating block/pre/post states from some unit tests (#1123)
* Add post-state checks, comments
* Add state_transition_vectors crate
* Integrate new testing crate with CI
* Add readme
* Add additional valid tests
* Remove ExitTests (they were moved to new crate)
* Small test fixes
* Delete incorrect saturating_sub in slash_validator
And clean-up the balance increase/decrease functions to look more like the spec.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
