## Issue Addressed
We still ping peers that are considered in a disconnecting state
## Proposed Changes
Do not ping peers once we decide they are disconnecting
Upgrade logs about ignored rpc messages
## Additional Info
--
## Issue Addressed
N/A
## Proposed Changes
https://github.com/sigp/lighthouse/pull/3133 changed the rpc type limits to be fork aware i.e. if our current fork based on wall clock slot is Altair, then we apply only altair rpc type limits. This is a bug because phase0 blocks can still be sent over rpc and phase 0 block minimum size is smaller than altair block minimum size. So a phase0 block with `size < SIGNED_BEACON_BLOCK_ALTAIR_MIN` will return an `InvalidData` error as it doesn't pass the rpc types bound check.
This error can be seen when we try syncing pre-altair blocks with size smaller than `SIGNED_BEACON_BLOCK_ALTAIR_MIN`.
This PR fixes the issue by also accounting for forks earlier than current_fork in the rpc limits calculation in the `rpc_block_limits_by_fork` function. I decided to hardcode the limits in the function because that seemed simpler than calculating previous forks based on current fork and doing a min across forks. Adding a new fork variant is simple and can the limits can be easily checked in a review.
Adds unit tests and modifies the syncing simulator to check the syncing from across fork boundaries.
The syncing simulator's block 1 would always be of phase 0 minimum size (404 bytes) which is smaller than altair min block size (since block 1 contains no attestations).
## Proposed Changes
I did some gardening 🌳 in our dependency tree:
- Remove duplicate versions of `warp` (git vs patch)
- Remove duplicate versions of lots of small deps: `cpufeatures`, `ethabi`, `ethereum-types`, `bitvec`, `nix`, `libsecp256k1`.
- Update MDBX (should resolve#3028). I tested and Lighthouse compiles on Windows 11 now.
- Restore `psutil` back to upstream
- Make some progress updating everything to rand 0.8. There are a few crates stuck on 0.7.
Hopefully this puts us on a better footing for future `cargo audit` issues, and improves compile times slightly.
## Additional Info
Some crates are held back by issues with `zeroize`. libp2p-noise depends on [`chacha20poly1305`](https://crates.io/crates/chacha20poly1305) which depends on zeroize < v1.5, and we can only have one version of zeroize because it's post 1.0 (see https://github.com/rust-lang/cargo/issues/6584). The latest version of `zeroize` is v1.5.4, which is used by the new versions of many other crates (e.g. `num-bigint-dig`). Once a new version of chacha20poly1305 is released we can update libp2p-noise and upgrade everything to the latest `zeroize` version.
I've also opened a PR to `blst` related to zeroize: https://github.com/supranational/blst/pull/111
## Issue Addressed
N/A
## Proposed Changes
Fix the upper bound for blocks by root responses to be equal to the max merge block size instead of altair.
Further make the rpc response limits fork aware.
## Proposed Changes
Add a `lighthouse db` command with three initial subcommands:
- `lighthouse db version`: print the database schema version.
- `lighthouse db migrate --to N`: manually upgrade (or downgrade!) the database to a different version.
- `lighthouse db inspect --column C`: log the key and size in bytes of every value in a given `DBColumn`.
This PR lays the groundwork for other changes, namely:
- Mark's fast-deposit sync (https://github.com/sigp/lighthouse/pull/2915), for which I think we should implement a database downgrade (from v9 to v8).
- My `tree-states` work, which already implements a downgrade (v10 to v8).
- Standalone purge commands like `lighthouse db purge-dht` per https://github.com/sigp/lighthouse/issues/2824.
## Additional Info
I updated the `strum` crate to 0.24.0, which necessitated some changes in the network code to remove calls to deprecated methods.
Thanks to @winksaville for the motivation, and implementation work that I used as a source of inspiration (https://github.com/sigp/lighthouse/pull/2685).
## Issue Addressed
MEV boost compatibility
## Proposed Changes
See #2987
## Additional Info
This is blocked on the stabilization of a couple specs, [here](https://github.com/ethereum/beacon-APIs/pull/194) and [here](https://github.com/flashbots/mev-boost/pull/20).
Additional TODO's and outstanding questions
- [ ] MEV boost JWT Auth
- [ ] Will `builder_proposeBlindedBlock` return the revealed payload for the BN to propogate
- [ ] Should we remove `private-tx-proposals` flag and communicate BN <> VC with blinded blocks by default once these endpoints enter the beacon-API's repo? This simplifies merge transition logic.
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
#3006
## Proposed Changes
This PR changes the default behaviour of lighthouse to ignore discovered IPs that are not globally routable. It adds a CLI flag, --enable-local-discovery to permit the non-global IPs in discovery.
NOTE: We should take care in merging this as I will break current set-ups that rely on local IP discovery. I made this the non-default behaviour because we dont really want to be wasting resources attempting to connect to non-routable addresses and we dont want to propagate these to others (on the chance we can connect to one of these local nodes), improving discoveries efficiency.
## Proposed Changes
Lots of lint updates related to `flat_map`, `unwrap_or_else` and string patterns. I did a little more creative refactoring in the op pool, but otherwise followed Clippy's suggestions.
## Additional Info
We need this PR to unblock CI.
## Issue Addressed
I noticed in some logs some excess and unecessary discovery queries. What was happening was we were pruning our peers down to our outbound target and having some disconnect. When we are below this threshold we try to find more peers (even if we are at our peer limit). The request becomes futile because we have no more peer slots.
This PR corrects this issue and advances the pruning mechanism to favour subnet peers.
An overview the new logic added is:
- We prune peers down to a target outbound peer count which is higher than the minimum outbound peer count.
- We only search for more peers if there is room to do so, and we are below the minimum outbound peer count not the target. So this gives us some buffer for peers to disconnect. The buffer is currently 10%
The modified pruning logic is documented in the code but for reference it should do the following:
- Prune peers with bad scores first
- If we need to prune more peers, then prune peers that are subscribed to a long-lived subnet
- If we still need to prune peers, the prune peers that we have a higher density of on any given subnet which should drive for uniform peers across all subnets.
This will need a bit of testing as it modifies some significant peer management behaviours in lighthouse.
## Issue Addressed
NA
## Proposed Changes
This PR extends #3018 to address my review comments there and add automated integration tests with Geth (and other implementations, in the future).
I've also de-duplicated the "unused port" logic by creating an `common/unused_port` crate.
## Additional Info
I'm not sure if we want to merge this PR, or update #3018 and merge that. I don't mind, I'm primarily opening this PR to make sure CI works.
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
## Issue Addressed
Lighthouse gossiping late messages
## Proposed Changes
Point LH to our fork using tokio interval, which 1) works as expected 2) is more performant than the previous version that actually worked as expected
Upgrade libp2p
## Additional Info
https://github.com/libp2p/rust-libp2p/issues/2497
## Issue Addressed
On a network with few nodes, it is possible that the same node can be found from a subnet discovery and a normal peer discovery at the same time.
The network behaviour loads these peers into events and processes them when it has the chance. It can happen that the same peer can enter the event queue more than once and then attempt to be dialed twice.
This PR shifts the registration of nodes in the peerdb as being dialed before they enter the NetworkBehaviour queue, preventing multiple attempts of the same peer being entered into the queue and avoiding the race condition.
## Issue Addressed
#2947
## Proposed Changes
Store messages that fail to be published due to insufficient peers for retry later. Messages expire after half an epoch and are retried if gossipsub informs us that an useful peer has connected. Currently running in Atlanta
## Additional Info
If on retry sending the messages fails they will not be tried again
The gossipsub history was increased to a good portion of a slot from 2.1 seconds in the last release.
Although it shouldn't cause too much issue, it could be related to recieving later messages than usual and interacting with our scoring system penalizing peers. For consistency, this PR reduces the time we gossip messages back to the same values of the previous release.
It also adjusts the gossipsub heartbeat time for testing purposes with a developer flag but this should not effect end users.
In the latest release we decreased the target number of subnet peers.
It appears this could be causing issues in some cases and so reverting it back to the previous number it wise. A larger PR that follows this will address some other related discovery issues and peer management around subnet peer discovery.
## Issue Addressed
We emit a warning to verify that all peer connection state information is consistent. A warning is given under one edge case;
We try to dial a peer with peer-id X and multiaddr Y. The peer responds to multiaddr Y with a different peer-id, Z. The dialing to the peer fails, but libp2p injects the failed attempt as peer-id Z.
In this instance, our PeerDB tries to add a new peer in the disconnected state under a previously unknown peer-id. This is harmless and so this PR permits this behaviour without logging a warning.
## Proposed Changes
Change the canonical fork name for the merge to Bellatrix. Keep other merge naming the same to avoid churn.
I've also fixed and enabled the `fork` and `transition` tests for Bellatrix, and the v1.1.7 fork choice tests.
Additionally, the `BellatrixPreset` has been added with tests. It gets served via the `/config/spec` API endpoint along with the other presets.
## Issue Addressed
The PeerDB was getting out of sync with the number of disconnected peers compared to the actual count. As this value determines how many we store in our cache, over time the cache was depleting and we were removing peers immediately resulting in errors that manifest as unknown peers for some operations.
The error occurs when dialing a peer fails, we were not correctly updating the peerdb counter because the increment to the counter was placed in the wrong order and was therefore not incrementing the count.
This PR corrects this.
There is a pretty significant tradeoff between bandwidth and speed of gossipsub messages.
We can reduce our bandwidth usage considerably at the cost of minimally delaying gossipsub messages. The impact of delaying messages has not been analyzed thoroughly yet, however this PR in conjunction with some gossipsub updates show considerable bandwidth reduction.
This PR allows the user to set a CLI value (`network-load`) which is an integer in the range of 1 of 5 depending on their bandwidth appetite. 1 represents the least bandwidth but slowest message recieving and 5 represents the most bandwidth and fastest received message time.
For low-bandwidth users it is likely to be more efficient to use a lower value. The default is set to 3, which currently represents a reduced bandwidth usage compared to previous version of this PR. The previous lighthouse versions are equivalent to setting the `network-load` CLI to 4.
This PR is awaiting a few gossipsub updates before we can get it into lighthouse.
## Proposed Changes
Update `superstruct` to bring in @realbigsean's fixes necessary for MEV-compatible private beacon block types (a la #2795).
The refactoring is due to another change in superstruct that allows partial getters to be auto-generated.
## Issue Addressed
#2841
## Proposed Changes
Not counting dialing peers while deciding if we have reached the target peers in case of outbound peers.
## Additional Info
Checked this running in nodes and bandwidth looks normal, peer count looks normal too
## Issue Addressed
Resolves: https://github.com/sigp/lighthouse/issues/2741
Includes: https://github.com/sigp/lighthouse/pull/2853 so that we can get ssz static tests passing here on v1.1.6. If we want to merge that first, we can make this diff slightly smaller
## Proposed Changes
- Changes the `justified_epoch` and `finalized_epoch` in the `ProtoArrayNode` each to an `Option<Checkpoint>`. The `Option` is necessary only for the migration, so not ideal. But does allow us to add a default logic to `None` on these fields during the database migration.
- Adds a database migration from a legacy fork choice struct to the new one, search for all necessary block roots in fork choice by iterating through blocks in the db.
- updates related to https://github.com/ethereum/consensus-specs/pull/2727
- We will have to update the persisted forkchoice to make sure the justified checkpoint stored is correct according to the updated fork choice logic. This boils down to setting the forkchoice store's justified checkpoint to the justified checkpoint of the block that advanced the finalized checkpoint to the current one.
- AFAICT there's no migration steps necessary for the update to allow applying attestations from prior blocks, but would appreciate confirmation on that
- I updated the consensus spec tests to v1.1.6 here, but they will fail until we also implement the proposer score boost updates. I confirmed that the previously failing scenario `new_finalized_slot_is_justified_checkpoint_ancestor` will now pass after the boost updates, but haven't confirmed _all_ tests will pass because I just quickly stubbed out the proposer boost test scenario formatting.
- This PR now also includes proposer boosting https://github.com/ethereum/consensus-specs/pull/2730
## Additional Info
I realized checking justified and finalized roots in fork choice makes it more likely that we trigger this bug: https://github.com/ethereum/consensus-specs/pull/2727
It's possible the combination of justified checkpoint and finalized checkpoint in the forkchoice store is different from in any block in fork choice. So when trying to startup our store's justified checkpoint seems invalid to the rest of fork choice (but it should be valid). When this happens we get an `InvalidBestNode` error and fail to start up. So I'm including that bugfix in this branch.
Todo:
- [x] Fix fork choice tests
- [x] Self review
- [x] Add fix for https://github.com/ethereum/consensus-specs/pull/2727
- [x] Rebase onto Kintusgi
- [x] Fix `num_active_validators` calculation as @michaelsproul pointed out
- [x] Clean up db migrations
Co-authored-by: realbigsean <seananderson33@gmail.com>
Fix max packet sizes
Fix max_payload_size function
Add merge block test
Fix max size calculation; fix up test
Clear comments
Add a payload_size_function
Use safe arith for payload calculation
Return an error if block too big in block production
Separate test to check if block is over limit
Added Execution Payload from Rayonism Fork
Updated new Containers to match Merge Spec
Updated BeaconBlockBody for Merge Spec
Completed updating BeaconState and BeaconBlockBody
Modified ExecutionPayload<T> to use Transaction<T>
Mostly Finished Changes for beacon-chain.md
Added some things for fork-choice.md
Update to match new fork-choice.md/fork.md changes
ran cargo fmt
Added Missing Pieces in eth2_libp2p for Merge
fix ef test
Various Changes to Conform Closer to Merge Spec
## Issue Addressed
Users are experiencing `Status'd peer not found` errors
## Proposed Changes
Although I cannot reproduce this error, this is only one connection state change that is not addressed in the peer manager (that I could see). The error occurs because the number of disconnected peers in the peerdb becomes out of sync with the actual number of disconnected peers. From what I can tell almost all possible connection state changes are handled, except for the case when a disconnected peer changes to be disconnecting. This can potentially happen at the peer connection limit, where a previously connected peer switches to disconnecting.
This PR decrements the disconnected counter when this event occurs and from what I can tell, covers all possible disconnection state changes in the peer manager.
## Issue Addressed
N/A
## Proposed Changes
1. Don't disconnect peer from dht on connection limit errors
2. Bump up `PRIORITY_PEER_EXCESS` to allow for dialing upto 60 peers by default.
Co-authored-by: Diva M <divma@protonmail.com>
I had this change but it seems to have been lost in chaos of network upgrades.
The swarm dialing event seems to miss some cases where we dial via the behaviour. This causes an error to be logged as the peer manager doesn't know about some dialing events.
This shifts the logic to the behaviour to inform the peer manager.
## Issue Addressed
Part of a bigger effort to make the network globals read only. This moves all writes to the `PeerDB` to the `eth2_libp2p` crate. Limiting writes to the peer manager is a slightly more complicated issue for a next PR, to keep things reviewable.
## Proposed Changes
- Make the peers field in the globals a private field.
- Allow mutable access to the peers field to `eth2_libp2p` for now.
- Add a new network message to update the sync state.
Co-authored-by: Age Manning <Age@AgeManning.com>
RPC Responses are for some reason not removing their timeout when they are completing.
As an example:
```
Nov 09 01:18:20.256 DEBG Received BlocksByRange Request step: 1, start_slot: 728465, count: 64, peer_id: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw
Nov 09 01:18:20.263 DEBG Received BlocksByRange Request step: 1, start_slot: 728593, count: 64, peer_id: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw
Nov 09 01:18:20.483 DEBG BlocksByRange Response sent returned: 63, requested: 64, current_slot: 2466389, start_slot: 728465, msg: Failed to return all requested blocks, peer: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw
Nov 09 01:18:20.500 DEBG BlocksByRange Response sent returned: 64, requested: 64, current_slot: 2466389, start_slot: 728593, peer: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw
Nov 09 01:18:21.068 DEBG Received BlocksByRange Request step: 1, start_slot: 728529, count: 64, peer_id: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw
Nov 09 01:18:21.272 DEBG BlocksByRange Response sent returned: 63, requested: 64, current_slot: 2466389, start_slot: 728529, msg: Failed to return all requested blocks, peer: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw
Nov 09 01:18:23.434 DEBG Received BlocksByRange Request step: 1, start_slot: 728657, count: 64, peer_id: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw
Nov 09 01:18:23.665 DEBG BlocksByRange Response sent returned: 64, requested: 64, current_slot: 2466390, start_slot: 728657, peer: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw
Nov 09 01:18:25.851 DEBG Received BlocksByRange Request step: 1, start_slot: 728337, count: 64, peer_id: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw
Nov 09 01:18:25.851 DEBG Received BlocksByRange Request step: 1, start_slot: 728401, count: 64, peer_id: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw
Nov 09 01:18:26.094 DEBG BlocksByRange Response sent returned: 62, requested: 64, current_slot: 2466390, start_slot: 728401, msg: Failed to return all requested blocks, peer: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw
Nov 09 01:18:26.100 DEBG BlocksByRange Response sent returned: 63, requested: 64, current_slot: 2466390, start_slot: 728337, msg: Failed to return all requested blocks, peer: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw
Nov 09 01:18:31.070 DEBG RPC Error direction: Incoming, score: 0, peer_id: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw, client: Prysm: version: a80b1c252a9b4773493b41999769bf3134ac373f, os_version: unknown, err: Stream Timeout, protocol: beacon_blocks_by_range, service: libp2p
Nov 09 01:18:31.070 WARN Timed out to a peer's request. Likely insufficient resources, reduce peer count, service: libp2p
Nov 09 01:18:31.085 DEBG RPC Error direction: Incoming, score: 0, peer_id: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw, client: Prysm: version: a80b1c252a9b4773493b41999769bf3134ac373f, os_version: unknown, err: Stream Timeout, protocol: beacon_blocks_by_range, service: libp2p
Nov 09 01:18:31.085 WARN Timed out to a peer's request. Likely insufficient resources, reduce peer count, service: libp2p
Nov 09 01:18:31.459 DEBG RPC Error direction: Incoming, score: 0, peer_id: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw, client: Prysm: version: a80b1c252a9b4773493b41999769bf3134ac373f, os_version: unknown, err: Stream Timeout, protocol: beacon_blocks_by_range, service: libp2p
Nov 09 01:18:31.459 WARN Timed out to a peer's request. Likely insufficient resources, reduce peer count, service: libp2p
Nov 09 01:18:34.129 DEBG RPC Error direction: Incoming, score: 0, peer_id: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw, client: Prysm: version: a80b1c252a9b4773493b41999769bf3134ac373f, os_version: unknown, err: Stream Timeout, protocol: beacon_blocks_by_range, service: libp2p
Nov 09 01:18:34.130 WARN Timed out to a peer's request. Likely insufficient resources, reduce peer count, service: libp2p
Nov 09 01:18:35.686 DEBG Peer Manager disconnecting peer reason: Too many peers, peer_id: 16Uiu2HAmEmBURejquBUMgKAqxViNoPnSptTWLA2CfgSPnnKENBNw, service: libp2p
```
This PR is to investigate and correct the issue.
~~My current thoughts are that for some reason we are not closing the streams correctly, or fast enough, or the executor is not registering the closes and waking up.~~ - Pretty sure this is not the case, see message below for a more accurate reason.
~~I've currently added a timeout to stream closures in an attempt to force streams to close and the future to always complete.~~ I removed this
This simply moves some functions that were "swarm notifications" to a network behaviour implementation.
Notes
------
- We could disconnect from the peer manager but we would lose the rpc shutdown message
- We still notify from the swarm since this is the most reliable way to get some events. Ugly but best for now
- Events need to be pushed with "add event" to wake the waker
Co-authored-by: Divma <26765164+divagant-martian@users.noreply.github.com>
## Issue Addressed
I've done this change in a couple of WIPs already so I might as well submit it on its own. This changes no functionality but reduces coupling in a 0.0001%. It also helps new people who need to work in the peer manager to better understand what it actually needs from the outside
## Proposed Changes
Add a config to the peer manager
## Issue Addressed
The computation of metrics in the network service can be expensive. This disables the computation unless the cli flag `metrics` is set.
## Additional Info
Metrics in other parts of the network are still updated, since most are simple metrics and checking if metrics are enabled each time each metric is updated doesn't seem like a gain.
This is a pre-cursor to the next libp2p upgrade.
It is currently being used for staging a number of PR upgrades which are contingent on the latest libp2p.
