## Proposed Changes
With proposer boosting implemented (#2822) we have an opportunity to re-org out late blocks.
This PR adds three flags to the BN to control this behaviour:
* `--disable-proposer-reorgs`: turn aggressive re-orging off (it's on by default).
* `--proposer-reorg-threshold N`: attempt to orphan blocks with less than N% of the committee vote. If this parameter isn't set then N defaults to 20% when the feature is enabled.
* `--proposer-reorg-epochs-since-finalization N`: only attempt to re-org late blocks when the number of epochs since finalization is less than or equal to N. The default is 2 epochs, meaning re-orgs will only be attempted when the chain is finalizing optimally.
For safety Lighthouse will only attempt a re-org under very specific conditions:
1. The block being proposed is 1 slot after the canonical head, and the canonical head is 1 slot after its parent. i.e. at slot `n + 1` rather than building on the block from slot `n` we build on the block from slot `n - 1`.
2. The current canonical head received less than N% of the committee vote. N should be set depending on the proposer boost fraction itself, the fraction of the network that is believed to be applying it, and the size of the largest entity that could be hoarding votes.
3. The current canonical head arrived after the attestation deadline from our perspective. This condition was only added to support suppression of forkchoiceUpdated messages, but makes intuitive sense.
4. The block is being proposed in the first 2 seconds of the slot. This gives it time to propagate and receive the proposer boost.
## Additional Info
For the initial idea and background, see: https://github.com/ethereum/consensus-specs/pull/2353#issuecomment-950238004
There is also a specification for this feature here: https://github.com/ethereum/consensus-specs/pull/3034
Co-authored-by: Michael Sproul <micsproul@gmail.com>
Co-authored-by: pawan <pawandhananjay@gmail.com>
## Issue Addressed
Closes#3709
## Proposed Changes
Add the job `compile-with-beta-compiler` to `test-suite`. This job has the following steps:
1. Use `actions/checkout@v3`. (Needed to run make in a later step.)
2. Install the dependencies listed in [build from source guide](https://lighthouse-book.sigmaprime.io/installation-source.html).
3. Change the compiler to the current beta version with `rustup override`.
4. Run `make`.
## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/3656
## Proposed Changes
* Replace `set-output` by `$GITHUB_OUTPUT` usage
* Avoid rate-limits when installing `protoc` by making authenticated requests (continuation of https://github.com/sigp/lighthouse/pull/3621)
* Upgrade all Ubuntu 18.04 usage to 22.04 (18.04 is end of life)
* Upgrade macOS-latest to explicit macOS-12 to silence warning
* Use `actions/checkout@v3` and `actions/cache@v3` to avoid deprecated NodeJS v12
## Additional Info
Can't silence the NodeJS warnings entirely due to https://github.com/sigp/lighthouse/issues/3705. Can fix that in future.
## Issue Addressed
The release CI is currently broken due to the addition of the `protoc` dependency. Here's a failure of the release flow running on my fork: https://github.com/michaelsproul/lighthouse/actions/runs/3155541478/jobs/5134317334
## Proposed Changes
- Install `protoc` on Windows and Mac so that it's available for `cargo install`.
- Install an x86_64 binary in the Cross image for the aarch64 platform: we need a binary that runs on the host, _not_ on the target.
- Fix `macos` local testnet CI by using the Github API key to dodge rate limiting (this issue: https://github.com/actions/runner-images/issues/602).
## Proposed Changes
Add a new Cargo compilation profile called `maxperf` which enables more aggressive compiler optimisations at the expense of compilation time.
Some rough initial benchmarks show that this can provide up to a 25% reduction to run time for CPU bound tasks like block processing: https://docs.google.com/spreadsheets/d/15jHuZe7lLHhZq9Nw8kc6EL0Qh_N_YAYqkW2NQ_Afmtk/edit
The numbers in that spreadsheet compare the `consensus-context` branch from #3604 to the same branch compiled with the `maxperf` profile using:
```
PROFILE=maxperf make install-lcli
```
## Additional Info
The downsides of the maxperf profile are:
- It increases compile times substantially, which will particularly impact low-spec hardware. Compiling `lcli` is about 3x slower. Compiling Lighthouse is about 5x slower on my 5950X: 17m 38s rather than 3m 28s.
As a result I think we should not enable this everywhere by default.
- **Option 1**: enable by default for our released binaries. This gives the majority of users the fastest version of `lighthouse` possible, at the expense of slowing down our release CI. Source builds will continue to use the default `release` profile unless users opt-in to `maxperf`.
- **Option 2**: enable by default for source builds. This gives users building from source an edge, but makes them pay for it with compilation time.
I think I would prefer Option 1. I'll try doing some benchmarking to see how long a maxperf build of Lighthouse would take on GitHub actions.
Credit to Nicholas Nethercote for documenting these options in the Rust Performance Book: https://nnethercote.github.io/perf-book/build-configuration.html.
## Issue Addressed
I think the antithesis is failing due to an OOM which may be resolved by updating the ubuntu image it runs on. The lcli build looks like it's failing because the image lacks the `libclang` dependency
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
Bump versions to v3.0.0
## Additional Info
- ~~Blocked on #3439~~
- ~~Blocked on #3459~~
- ~~Blocked on #3463~~
- ~~Blocked on #3462~~
- ~~Requires further testing~~
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Proposed Changes
Enable multiple database backends for the slasher, either MDBX (default) or LMDB. The backend can be selected using `--slasher-backend={lmdb,mdbx}`.
## Additional Info
In order to abstract over the two library's different handling of database lifetimes I've used `Box::leak` to give the `Environment` type a `'static` lifetime. This was the only way I could think of using 100% safe code to construct a self-referential struct `SlasherDB`, where the `OpenDatabases` refers to the `Environment`. I think this is OK, as the `Environment` is expected to live for the life of the program, and both database engines leave the database in a consistent state after each write. The memory claimed for memory-mapping will be freed by the OS and appropriately flushed regardless of whether the `Environment` is actually dropped.
We are depending on two `sigp` forks of `libmdbx-rs` and `lmdb-rs`, to give us greater control over MDBX OS support and LMDB's version.
## Issue Addressed
I think we're running into this in our linkcheck, so I'm going to frist verify linkcheck fails on the current version, and then try downgrading it to see if it passes https://github.com/chronotope/chrono/issues/755
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
https://github.com/sigp/lighthouse/issues/3091
Extends https://github.com/sigp/lighthouse/pull/3062, adding pre-bellatrix block support on blinded endpoints and allowing the normal proposal flow (local payload construction) on blinded endpoints. This resulted in better fallback logic because the VC will not have to switch endpoints on failure in the BN <> Builder API, the BN can just fallback immediately and without repeating block processing that it shouldn't need to. We can also keep VC fallback from the VC<>BN API's blinded endpoint to full endpoint.
## Proposed Changes
- Pre-bellatrix blocks on blinded endpoints
- Add a new `PayloadCache` to the execution layer
- Better fallback-from-builder logic
## Todos
- [x] Remove VC transition logic
- [x] Add logic to only enable builder flow after Merge transition finalization
- [x] Tests
- [x] Fix metrics
- [x] Rustdocs
Co-authored-by: Mac L <mjladson@pm.me>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
Which issue # does this PR address?
## Proposed Changes
Please list or describe the changes introduced by this PR.
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
N/A
## Proposed Changes
Make simulator merge compatible. Adds a `--post_merge` flag to the eth1 simulator that enables a ttd and simulates the merge transition. Uses the `MockServer` in the execution layer test utils to simulate a dummy execution node.
Adds the merge transition simulation to CI.
## Issue Addressed
N/A
## Proposed Changes
Since Rust 1.62, we can use `#[derive(Default)]` on enums. ✨https://blog.rust-lang.org/2022/06/30/Rust-1.62.0.html#default-enum-variants
There are no changes to functionality in this PR, just replaced the `Default` trait implementation with `#[derive(Default)]`.
## Description
Add a new lint to CI that attempts to detect calls to functions like `block_on` from async execution contexts. This lint was written from scratch exactly for this purpose, on my fork of Clippy: https://github.com/michaelsproul/rust-clippy/tree/disallow-from-async
## Additional Info
- I've successfully detected the previous two issues we had with `block_on` by running the linter on the commits prior to each of these PRs: https://github.com/sigp/lighthouse/pull/3165, https://github.com/sigp/lighthouse/pull/3199.
- The lint runs on CI with `continue-on-error: true` so that if it fails spuriously it won't block CI.
- I think it would be good to merge this PR before https://github.com/sigp/lighthouse/pull/3244 so that we can lint the extensive executor-related changes in that PR.
- I aim to upstream the lint to Clippy, at which point building a custom version of Clippy from my fork will no longer be necessary. I imagine this will take several weeks or months though, because the code is currently a bit hacky and will need some renovations to pass review.
## Issue Addressed
This fixes the low-hanging Clippy lints introduced in Rust 1.61 (due any hour now). It _ignores_ one lint, because fixing it requires a structural refactor of the validator client that needs to be done delicately. I've started on that refactor and will create another PR that can be reviewed in more depth in the coming days. I think we should merge this PR in the meantime to unblock CI.
## Issue Addressed
Attempt to fix CI
## Proposed Changes
- ~~install `node-gyp-build` which should look for prebuilt binaries for `@truffle-suite/bigint_buffer`. This should make it so we don't have to build it directly. See: https://github.com/trufflesuite/ganache/pull/1414~~ this didn't work
- This also uses the `setup-node` action because it includes caching. Sort of a shot in the dark, but the ganache github repo uses it and the failures seem to be for missing files in a node cache
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
Hopefully makes windows ganache installation more reliable.
## Proposed Changes
- use `chocolatey` to install windows build tools. This seems to often be the prescribed solution for `node gyp` issues. `chocolatey` is used here because `npm install --global --production windows-build-tools` hangs in github actions
## Additional Info
I still haven't found why the prior installation technique would sometimes work, the `windows-2019` environments seem to be identical across successes and failures. I think this should be re-run a few times to see if it can consistently pass
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Proposed Changes
Set a minimum supported Rust version (MSRV) in the `Cargo.toml` for the Lighthouse binary so that attempts to compile it with an outdated compiler fail immediately with a clear error.
To ensure that the codebase builds with the MSRV I've also added a Github actions job that runs `cargo check` using the MSRV extracted from `Cargo.toml`. This will force us to keep it up to date.
I opted to use `cargo check` rather than Clippy because Clippy frequently introduces new lints that we adopt, so our MSRV for Clippy is usually the most recent Rust version, while the MSRV for building Lighthouse is older.
## Issue Addressed
NA
## Proposed Changes
Address a CI failure in the release suite.
Example: https://github.com/sigp/lighthouse/actions/runs/1984266187
## Additional Info
I believe we should merge this into `unstable` and `stable`. Then, move the `v2.1.4` commit to target the commit with the updated CI. It's sad that v2.1.4 has two commits, but they're functionally equivalent for users.
## Issue Addressed
As discussed on last-night's consensus call, the testnets next week will target the [Kiln Spec v2](https://hackmd.io/@n0ble/kiln-spec).
Presently, we support Kiln V1. V2 is backwards compatible, except for renaming `random` to `prev_randao` in:
- https://github.com/ethereum/execution-apis/pull/180
- https://github.com/ethereum/consensus-specs/pull/2835
With this PR we'll no longer be compatible with the existing Kintsugi and Kiln testnets, however we'll be ready for the testnets next week. I raised this breaking change in the call last night, we are all keen to move forward and break things.
We now target the [`merge-kiln-v2`](https://github.com/MariusVanDerWijden/go-ethereum/tree/merge-kiln-v2) branch for interop with Geth. This required adding the `--http.aauthport` to the tester to avoid a port conflict at startup.
### Changes to exec integration tests
There's some change in the `merge-kiln-v2` version of Geth that means it can't compile on a vanilla Github runner. Bumping the `go` version on the runner solved this issue.
Whilst addressing this, I refactored the `testing/execution_integration` crate to be a *binary* rather than a *library* with tests. This means that we don't need to run the `build.rs` and build Geth whenever someone runs `make lint` or `make test-release`. This is nice for everyday users, but it's also nice for CI so that we can have a specific runner for these tests and we don't need to ensure *all* runners support everything required to build all execution clients.
## More Info
- [x] ~~EF tests are failing since the rename has broken some tests that reference the old field name. I have been told there will be new tests released in the coming days (25/02/22 or 26/02/22).~~
## Issue Addressed
Timeouts due to Windows builds running for 2h 20m.
## Proposed Changes
* Increase Bors timeout to 3h
* Refine the target branch check so that it will pass when we make PRs to feature branches. This is just an extra change I've been meaning to sneak in for a while.
## Additional Info
* I think it would also be cool to try caching for CI again, but that's a separate issue and we'll still need the long timeout on a cache miss.
## Issue Addressed
NA
## Proposed Changes
This PR extends #3018 to address my review comments there and add automated integration tests with Geth (and other implementations, in the future).
I've also de-duplicated the "unused port" logic by creating an `common/unused_port` crate.
## Additional Info
I'm not sure if we want to merge this PR, or update #3018 and merge that. I don't mind, I'm primarily opening this PR to make sure CI works.
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
## Issue Addressed
N/A
## Proposed Changes
Removes all configurations and hard-coded rules related to the deprecated Pyrmont testnet.
## Additional Info
Pyrmont is deprecated/will be shut down after being used for scenario testing, this PR removes configurations related to it.
Co-authored-by: Zachinquarantine <zachinquarantine@yahoo.com>
## Issue Addressed
NA
## Proposed Changes
Add the "Update Priority" section which has featured in many of our previous releases (e.g., [Poñeta](https://github.com/sigp/lighthouse/releases/v2.1.1)).
Previously this section has been copied in manually.
## Additional Info
NA
## Issue Addressed
Closes#2938
## Proposed Changes
* Build and publish images with a `-modern` suffix which enable CPU optimizations for modern hardware.
* Add docs for the plethora of available images!
* Unify all the Docker workflows in `docker.yml` (including for tagged releases).
## Additional Info
The `Dockerfile` is no longer used by our Docker Hub builds, as we use `cross` and a generic approach for ARM and x86. There's a new CI job `docker-build-from-source` which tests the `Dockerfile` without publishing anything.
## Proposed Changes
Add a new hardcoded spec for the Gnosis Beacon Chain.
Ideally, official Lighthouse executables will be able to connect to the gnosis beacon chain from now on, using `--network gnosis` CLI option.
## Issue Addressed
Resolves https://github.com/sigp/lighthouse/issues/2763
## Proposed Changes
- Add a workflow which tests that local testnet starts successfully
- Added `set` option into the scripts in order to fail fast so that we can notice errors during starting local testnet.
- Fix errors on MacOS
- The redirect `&>>` is supported since bash v4 but the version bundled in macOS(11.6.1) is v3. a54f119c9b
## Issue Addressed
Automates a build and push to antithesis servers on merges to unstable. They run tests against lighthouse daily and have requested more frequent pushes. Currently we are just manually pushing stable images when we have a new release.
## Proposed Changes
- Add a `Dockerfile.libvoidstar`
- Add the `libvoidstar.so` binary
- Add a new workflow to autmatically build and push on merges to unstable
## Additional Info
Requires adding the following secrets
-`ANTITHESIS_USERNAME`
-`ANTITHESIS_PASSWORD`
-`ANTITHESIS_REPOSITORY`
-`ANTITHESIS_SERVER`
Tested here: https://github.com/realbigsean/lighthouse/actions/runs/1612821446
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
Closes#2286Closes#2538Closes#2342
## Proposed Changes
Part II of major slasher optimisations after #2767
These changes will be backwards-incompatible due to the move to MDBX (and the schema change) 😱
* [x] Shrink attester keys from 16 bytes to 7 bytes.
* [x] Shrink attester records from 64 bytes to 6 bytes.
* [x] Separate `DiskConfig` from regular `Config`.
* [x] Add configuration for the LRU cache size.
* [x] Add a "migration" that deletes any legacy LMDB database.
## Issue Addressed
This is related to #1926 and #1712.
## Proposed Changes
This PR adds a test that make sure that the used dependencies can be vendored.
Being able to vendor the dependencies is important for archival and repdroducibility purpose.
It's also required to package lighthouse for some Linux distributions. Specifically [NixOS](https://nixos.org/) and [Yocto](https://www.yoctoproject.org/).
## Additional Info
This PR only adds the test, it doesn't clean up the dependencies yet. That's why it is in draft.
## Issue Addressed
NA
## Proposed Changes
Adds some more testing for Altair to the op pool. Credits to @michaelsproul for some appropriated efforts here.
## Additional Info
NA
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
Implements the "union" type from the SSZ spec for `ssz`, `ssz_derive`, `tree_hash` and `tree_hash_derive` so it may be derived for `enums`:
https://github.com/ethereum/consensus-specs/blob/v1.1.0-beta.3/ssz/simple-serialize.md#union
The union type is required for the merge, since the `Transaction` type is defined as a single-variant union `Union[OpaqueTransaction]`.
### Crate Updates
This PR will (hopefully) cause CI to publish new versions for the following crates:
- `eth2_ssz_derive`: `0.2.1` -> `0.3.0`
- `eth2_ssz`: `0.3.0` -> `0.4.0`
- `eth2_ssz_types`: `0.2.0` -> `0.2.1`
- `tree_hash`: `0.3.0` -> `0.4.0`
- `tree_hash_derive`: `0.3.0` -> `0.4.0`
These these crates depend on each other, I've had to add a workspace-level `[patch]` for these crates. A follow-up PR will need to remove this patch, ones the new versions are published.
### Union Behaviors
We already had SSZ `Encode` and `TreeHash` derive for enums, however it just did a "transparent" pass-through of the inner value. Since the "union" decoding from the spec is in conflict with the transparent method, I've required that all `enum` have exactly one of the following enum-level attributes:
#### SSZ
- `#[ssz(enum_behaviour = "union")]`
- matches the spec used for the merge
- `#[ssz(enum_behaviour = "transparent")]`
- maintains existing functionality
- not supported for `Decode` (never was)
#### TreeHash
- `#[tree_hash(enum_behaviour = "union")]`
- matches the spec used for the merge
- `#[tree_hash(enum_behaviour = "transparent")]`
- maintains existing functionality
This means that we can maintain the existing transparent behaviour, but all existing users will get a compile-time error until they explicitly opt-in to being transparent.
### Legacy Option Encoding
Before this PR, we already had a union-esque encoding for `Option<T>`. However, this was with the *old* SSZ spec where the union selector was 4 bytes. During merge specification, the spec was changed to use 1 byte for the selector.
Whilst the 4-byte `Option` encoding was never used in the spec, we used it in our database. Writing a migrate script for all occurrences of `Option` in the database would be painful, especially since it's used in the `CommitteeCache`. To avoid the migrate script, I added a serde-esque `#[ssz(with = "module")]` field-level attribute to `ssz_derive` so that we can opt into the 4-byte encoding on a field-by-field basis.
The `ssz::legacy::four_byte_impl!` macro allows a one-liner to define the module required for the `#[ssz(with = "module")]` for some `Option<T> where T: Encode + Decode`.
Notably, **I have removed `Encode` and `Decode` impls for `Option`**. I've done this to force a break on downstream users. Like I mentioned, `Option` isn't used in the spec so I don't think it'll be *that* annoying. I think it's nicer than quietly having two different union implementations or quietly breaking the existing `Option` impl.
### Crate Publish Ordering
I've modified the order in which CI publishes crates to ensure that we don't publish a crate without ensuring we already published a crate that it depends upon.
## TODO
- [ ] Queue a follow-up `[patch]`-removing PR.
## Issue Addressed
Related to: #2259
Made an attempt at all the necessary updates here to publish the crates to crates.io. I incremented the minor versions on all the crates that have been previously published. We still might run into some issues as we try to publish because I'm not able to test this out but I think it's a good starting point.
## Proposed Changes
- Add description and license to `ssz_types` and `serde_util`
- rename `serde_util` to `eth2_serde_util`
- increment minor versions
- remove path dependencies
- remove patch dependencies
## Additional Info
Crates published:
- [x] `tree_hash` -- need to publish `tree_hash_derive` and `eth2_hashing` first
- [x] `eth2_ssz_types` -- need to publish `eth2_serde_util` first
- [x] `tree_hash_derive`
- [x] `eth2_ssz`
- [x] `eth2_ssz_derive`
- [x] `eth2_serde_util`
- [x] `eth2_hashing`
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Resolves#2406
## Proposed Changes
Add windows release binaries to our CI
## Additional Info
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Resolves#2069
## Proposed Changes
- Adds a `--doppelganger-detection` flag
- Adds a `lighthouse/seen_validators` endpoint, which will make it so the lighthouse VC is not interopable with other client beacon nodes if the `--doppelganger-detection` flag is used, but hopefully this will become standardized. Relevant Eth2 API repo issue: https://github.com/ethereum/eth2.0-APIs/issues/64
- If the `--doppelganger-detection` flag is used, the VC will wait until the beacon node is synced, and then wait an additional 2 epochs. The reason for this is to make sure the beacon node is able to subscribe to the subnets our validators should be attesting on. I think an alternative would be to have the beacon node subscribe to all subnets for 2+ epochs on startup by default.
## Additional Info
I'd like to add tests and would appreciate feedback.
TODO: handle validators started via the API, potentially make this default behavior
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
Resolves: #2087
## Proposed Changes
- Add a `Dockerfile` to the `lcli` directory
- Add a github actions job to build and push and `lcli` docker image on pushes to `unstable` and `stable`
## Additional Info
It's a little awkward but `lcli` requires the full project scope so must be built:
- from the `lighthouse` dir with: `docker build -f ./lcli/Dockerflie .`
- from the `lcli` dir with: `docker build -f ./Dockerfile ../`
Didn't include `libssl-dev` or `ca-certificates`, `lcli` doesn't need these right?
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
Add a checklist to the release draft created by CI. I know @michaelsproul was also working on this and I suspect @realbigsean also might have useful input.
## Additional Info
NA
## Proposed Changes
Implement the consensus changes necessary for the upcoming Altair hard fork.
## Additional Info
This is quite a heavy refactor, with pivotal types like the `BeaconState` and `BeaconBlock` changing from structs to enums. This ripples through the whole codebase with field accesses changing to methods, e.g. `state.slot` => `state.slot()`.
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
`make lint` failing on rust 1.53.0.
## Proposed Changes
1.53.0 updates
## Additional Info
I haven't figure out why yet, we were now hitting the recursion limit in a few crates. So I had to add `#![recursion_limit = "256"]` in a few places
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Windows incompatibility.
## Proposed Changes
On windows, lighthouse needs to default to STDIN as tty doesn't exist. Also Windows uses ACLs for file permissions. So to mirror chmod 600, we will remove every entry in a file's ACL and add only a single SID that is an alias for the file owner.
Beyond that, there were several changes made to different unit tests because windows has slightly different error messages as well as frustrating nuances around killing a process :/
## Additional Info
Tested on my Windows VM and it appears to work, also compiled & tested on Linux with these changes. Permissions look correct on both platforms now. Just waiting for my validator to activate on Prater so I can test running full validator client on windows.
Co-authored-by: ethDreamer <37123614+ethDreamer@users.noreply.github.com>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
Our v1.1.0 automated release failed to upload to Github. The `hub` command failed with a `403`, which seems like this issue: https://github.com/github/hub/issues/2149
## Proposed Changes
The suggested fix in that issue is to set the `$GITHUB_USER` environment variable. I can't really test this because this hasn't been failing on my fork, but seems low risk
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
Rust 1.50 has landed 🎉
The shiny new `clippy` peers down upon us mere mortals with disgust. Brutish peasants wrapping our `usize`s in superfluous `Option`s... tsk tsk.
I've performed the goat sacrifice and corrected our evil ways in this PR. Tonight we shall pray that Github Actions bestows the almighty green tick upon us.
## Additional Info
NA
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Attempt to prevent accidental merges to `stable` due to GitHub's default behaviour of opening PRs against it.
I've intentionally opened this PR against `stable` to test the functionality ;)
## Issue Addressed
N/A
## Proposed Changes
On any tag formatted `v*`, a full multi-arch docker build will be kicked off and automatically pushed to docker hub with the version tag.
This is a bit repetitive, because the image built will usually be the same as the image built on pushes to `stable`, but it seems like the simplest way to go about it and this will also work if we incorporate a workflow with `vX.X.X-rc` tags.
## Additional Info
This may also need to wait for env variable updates: https://github.com/sigp/lighthouse/pull/2135#issuecomment-754977433
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Resolves #2120
## Proposed Changes
This updates github actions to use `cross` when compiling linux x86_64 binaries.
## Additional Info
I think we could alternatively be explicit with the version of macOS or ubuntu we are running actions on and that could solve #2120. I'm not sure which method is preferred here though. Github actions supports Ubuntu 16.04
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Resolves#1674
## Proposed Changes
- Whenever a tag is pushed with the prefix `v` this workflow is triggered
- creates portable and non-portable binaries for linux x86_64, linux aarch64, macOS
- an attempt at using github actions caching
- signs each binary using GPG
- auto-generates full changelog based on commit messages since the last release
- creates a **draft** release
- hot new formatting (preview [here](https://github.com/realbigsean/lighthouse/releases/tag/v0.9.23))
- has been taking around 35 minutes
## Additional Info
TODOs:
- Figure out how we should automate dockerhub's version tag.
- It'd be quickest just to tag `latest`, but we'd need to make sure the docker workflow completes before this starts
- we do the same cross-compile in the `docker` workflow, we could try to use the same binary
- integrate a similar flow for unstable binaries (`-rc` tag?)
- improve caching, potentially use sccache
- if we start using a self-hosted runner this'll require some re-working
Need to add the following secrets to Github:
- `GPG_PASSPHRASE`
- ~~`GPG_PUBLIC_KEY`~~ hard-coded this, because it was tough manage as a secret
- `GPG_SIGNING_KEY`
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
N/A
## Proposed Changes
I didn't realize the `PORTABLE` env variable is only picked up by `install` in the `Makefile` so we are still getting `SIGILL`s:
https://github.com/sigp/lighthouse/runs/1565004525?check_suite_focus=true
## Additional Info
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
NA
## Proposed Changes
Fixes problems with slot times below 1 second which got revealed by running the syncing simulator with the default speedup time.
## Issue Addressed
N/A
## Proposed Changes
Add some caching to the test suite and to the aarch64 cross-compile in the docker build.
## Additional Info
Cache hits only occur if the Cargo.lock file is unchanged, Github Actions runner OS matches, and the cache is "in scope". Some documentation on github actions cache scoping is here:
https://docs.github.com/en/free-pro-team@latest/actions/guides/caching-dependencies-to-speed-up-workflows#matching-a-cache-key
I'm not sure how frequently we'll get cache hits, I imagine only on smaller PR's or updates to the same PR. And there is a cache size limit that we may end up reaching quickly. But Github actions handles evictions if we go over that limit.
Not sure how much of an impact this will end up having but I don't really see a downside to trying it out.
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
N/A
## Proposed Changes
- hardcode `ubuntu-18.04` -- I don't think this was causing us issues, but github actions is in the process of migrating `ubuntu-latest` from Ubuntu 18 -> 20.. so just in case
- different source of emulation dependencies -> https://github.com/tonistiigi/binfmt
- this one is explicitly referenced in the `buildx` github docs
- install emulation dependencies and run `docker buildx` in the same `run` command
- enable `buildx` with `DOCKER_CLI_EXPERIMENTAL: enabled` rather than re-building it
## Additional Info
N/A
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Resolves#1512
## Proposed Changes
- Adds a new docker Github Actions workflow
- Removes the Dockerhub hook
- Adds a new Dockerfile for use with pre-existing cross-compiled binaries
- on pushes to `unstable`
- builds an ARM64 image and tags it `latest-arm64-unstable`
- builds an AMD64 image and tags it `latest-amd64-unstable`
- builds an multiarch image by creating a manifest list referencing the prior two images and tags it `latest-unstable`
- on pushes to `stable`
- builds an ARM64 image and tags it `latest-arm64`
- builds an AMD64 image and tags it `latest-amd64`
- builds an multiarch image by creating a manifest list referencing the prior two images and tags it `latest`
## Additional Info
- for ARM64, first `cross` is used to cross compile the `lighthouse` and `lcli` binaries, then `docker buildx` is installed to actually build the docker image for the correct target platform. The image build pretty much just copies the binaries from local into the docker image (thanks @michaelsproul :) )
- The AMD64 and ARM64 builds run in parallel, in total it's been taking around 45mins on a local runner
- This PR does **not** cover version tags on docker images at the moment
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
NA
## Proposed Changes
Presently `master` is stable (and will be sunsetted) which means our docs only update after a release. This PR sets the docs to build on the `unstable` branch, which is equivalent to what what we've always had.
## Additional Info
This does raise the question of whether or not docs should target `stable` or `unstable`, but I'd prefer to maintain current functionality and merge #1966 for now. I think having two versions might be handy, one for stable and one for unstable; I don't imagine this very difficult to achieve.
## Issue Addressed
N/A
## Proposed Changes
Remove the MacOs tests. They routinely fail, causing bors to retry and slowing down the whole merge process.
## Additional Info
N/A
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Resolves#1100
## Proposed Changes
* Implement the `SafeArith` trait for `Slot` and `Epoch`, so that methods like `safe_add` become available.
* Tweak the `SafeArith` trait to allow a different `Rhs` type (analagous to `std::ops::Add`, etc).
* Add a `legacy-arith` feature to `types` and `state_processing` that conditionally enables implementations of
the `std` ops with saturating semantics.
* Check compilation of `types` and `state_processing` _without_ `legacy-arith` on CI,
thus guaranteeing that they only use the `SafeArith` primitives 🎉
## Additional Info
The `legacy-arith` feature gets turned on by all higher-level crates that depend on `state_processing` or `types`, thus allowing the beacon chain, networking, and other components to continue to rely on the availability of ops like `+`, `-`, `*`, etc.
**This is a consensus-breaking change**, but brings us in line with the spec, and our incompatibilities shouldn't have been reachable with any valid configuration of Eth2 parameters.
This reverts commit 2627463366.
## Issue Addressed
This is a temporary fix for #1589, by reverting #1574. The Docker image needs to be built with `--build-arg PORTABLE=true`, and we could probably integrate that into the multi-arch build, but in the interests of expediting a fix, this PR opts for a revert.
## Issue Addressed
#1512
## Proposed Changes
Use Github Actions to automate the Docker image build, so that we can make a multi-arch image.
## Additional Info
This change will require adding the DOCKER_USERNAME and DOCKER_PASSWORD secrets in Github. It will also require disabling the Docker Hub automated build.
## Issue Addressed
NA
## Proposed Changes
- Refactor the `bls` crate to support multiple BLS "backends" (e.g., milagro, blst, etc).
- Removes some duplicate, unused code in `common/rest_types/src/validator.rs`.
- Removes the old "upgrade legacy keypairs" functionality (these were unencrypted keys that haven't been supported for a few testnets, no one should be using them anymore).
## Additional Info
Most of the files changed are just inconsequential changes to function names.
## TODO
- [x] Optimization levels
- [x] Infinity point: https://github.com/supranational/blst/issues/11
- [x] Ensure milagro *and* blst are tested via CI
- [x] What to do with unsafe code?
- [x] Test infinity point in signature sets
## Proposed Changes
CI is failing on PRs because of a regression in nightly Rust. This change forces `rustup` to install a version of the nightly compiler that can at least build `rustfmt`, which should reduce the frequency of this happening.
## Additional Info
Example failing run: https://github.com/sigp/lighthouse/runs/896694659
Alternatively, we could allow CI to succeed even when `cargo-udeps` fails, but I think we should avoid doing that unless we really have to.
## Issue Addressed
Prevent CI from succeeding when there are warnings. Code can still be built and tested with warnings locally, but CI may fail during a Rust update (which is fine IMO).
## Proposed Changes
* Deny warnings for all stable compiler jobs on CI (excludes `cargo udeps`, which runs under nightly)
* Fix the warnings currently on `master` related to unnecessary `mem::replace`
* Add mac build to CI
* Always return an error for Health when not linux
* Change macos workflow
* Rename macos tests
* Disable health API test on Mac
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
* Fix parallelism bug in exit processing
Also:
* Remove parallelism for all other operations except deposit merkle proofs
* Improve exit tests
* Fix broken attestation test
Closes#1090
* Allow for generating block/pre/post states from some unit tests (#1123)
* Add post-state checks, comments
* Add state_transition_vectors crate
* Integrate new testing crate with CI
* Add readme
* Add additional valid tests
* Remove ExitTests (they were moved to new crate)
* Small test fixes
* Delete incorrect saturating_sub in slash_validator
And clean-up the balance increase/decrease functions to look more like the spec.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
