## Issue Addressed
NA
## Proposed Changes
- Bump to `v1.5.0-rc.0`.
- Increase attestation reprocessing queue size (I saw this filling up on Prater).
- Reduce error log for full attn reprocessing queue to warn.
## TODO
- [x] Manual testing
- [x] Resolve https://github.com/sigp/lighthouse/pull/2493
- [x] Include https://github.com/sigp/lighthouse/pull/2501
## Issue Addressed
- Resolves#2457
- Resolves#2443
## Proposed Changes
Target the (presently unreleased) head of `libp2p/rust-libp2p:master` in order to obtain the fix from https://github.com/libp2p/rust-libp2p/pull/2175.
Additionally:
- `libsecp256k1` needed to be upgraded to satisfy the new version of `libp2p`.
- There were also a handful of minor changes to `eth2_libp2p` to suit some interface changes.
- Two `cargo audit --ignore` flags were remove due to libp2p upgrades.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
When testing our (not-yet-released) Doppelganger implementation, I noticed that we aren't detecting attestations included in blocks (only those on the gossip network).
This is because during [block processing](e8c0d1f19b/beacon_node/beacon_chain/src/beacon_chain.rs (L2168)) we only update the `observed_attestations` cache with each attestation, but not the `observed_attesters` cache. This is the correct behaviour when we consider the [p2p spec](https://github.com/ethereum/eth2.0-specs/blob/v1.0.1/specs/phase0/p2p-interface.md):
> [IGNORE] There has been no other valid attestation seen on an attestation subnet that has an identical attestation.data.target.epoch and participating validator index.
We're doing the right thing here and still allowing attestations on gossip that we've seen in a block. However, this doesn't work so nicely for Doppelganger.
To resolve this, I've taken the following steps:
- Add a `observed_block_attesters` cache.
- Rename `observed_attesters` to `observed_gossip_attesters`.
## TODO
- [x] Add a test to ensure a validator that's been seen in a block attestation (but not a gossip attestation) returns `true` for `BeaconChain::validator_seen_at_epoch`.
- [x] Add a test to ensure `observed_block_attesters` isn't polluted via gossip attestations and vice versa.
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Proposed Changes
* Implement the validator client and HTTP API changes necessary to support Altair
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Resolves#2069
## Proposed Changes
- Adds a `--doppelganger-detection` flag
- Adds a `lighthouse/seen_validators` endpoint, which will make it so the lighthouse VC is not interopable with other client beacon nodes if the `--doppelganger-detection` flag is used, but hopefully this will become standardized. Relevant Eth2 API repo issue: https://github.com/ethereum/eth2.0-APIs/issues/64
- If the `--doppelganger-detection` flag is used, the VC will wait until the beacon node is synced, and then wait an additional 2 epochs. The reason for this is to make sure the beacon node is able to subscribe to the subnets our validators should be attesting on. I think an alternative would be to have the beacon node subscribe to all subnets for 2+ epochs on startup by default.
## Additional Info
I'd like to add tests and would appreciate feedback.
TODO: handle validators started via the API, potentially make this default behavior
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
N/A
## Proposed Changes
- Removing a bunch of unnecessary references
- Updated `Error::VariantError` to `Error::Variant`
- There were additional enum variant lints that I ignored, because I thought our variant names were fine
- removed `MonitoredValidator`'s `pubkey` field, because I couldn't find it used anywhere. It looks like we just use the string version of the pubkey (the `id` field) if there is no index
## Additional Info
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
- Resolves#2169
## Proposed Changes
Adds the `AttesterCache` to allow validators to produce attestations for older slots. Presently, some arbitrary restrictions can force validators to receive an error when attesting to a slot earlier than the present one. This can cause attestation misses when there is excessive load on the validator client or time sync issues between the VC and BN.
## Additional Info
NA
## Proposed Changes
Add the `sync_aggregate` from `BeaconBlock` to the bulk signature verifier for blocks. This necessitates a new signature set constructor for the sync aggregate, which is different from the others due to the use of [`eth2_fast_aggregate_verify`](https://github.com/ethereum/eth2.0-specs/blob/v1.1.0-alpha.7/specs/altair/bls.md#eth2_fast_aggregate_verify) for sync aggregates, per [`process_sync_aggregate`](https://github.com/ethereum/eth2.0-specs/blob/v1.1.0-alpha.7/specs/altair/beacon-chain.md#sync-aggregate-processing). I made the choice to return an optional signature set, with `None` representing the case where the signature is valid on account of being the point at infinity (requires no further checking).
To "dogfood" the changes and prevent duplication, the consensus logic now uses the signature set approach as well whenever it is required to verify signatures (which should only be in testing AFAIK). The EF tests pass with the code as it exists currently, but failed before I adapted the `eth2_fast_aggregate_verify` changes (which is good).
As a result of this change Altair block processing should be a little faster, and importantly, we will no longer accidentally verify signatures when replaying blocks, e.g. when replaying blocks from the database.
## Issue Addressed
NA
## Proposed Changes
This PR addresses two things:
1. Allows the `ValidatorMonitor` to work with Altair states.
1. Optimizes `altair::process_epoch` (see [code](https://github.com/paulhauner/lighthouse/blob/participation-cache/consensus/state_processing/src/per_epoch_processing/altair/participation_cache.rs) for description)
## Breaking Changes
The breaking changes in this PR revolve around one premise:
*After the Altair fork, it's not longer possible (given only a `BeaconState`) to identify if a validator had *any* attestation included during some epoch. The best we can do is see if that validator made the "timely" source/target/head flags.*
Whilst this seems annoying, it's not actually too bad. Finalization is based upon "timely target" attestations, so that's really the most important thing. Although there's *some* value in knowing if a validator had *any* attestation included, it's far more important to know about "timely target" participation, since this is what affects finality and justification.
For simplicity and consistency, I've also removed the ability to determine if *any* attestation was included from metrics and API endpoints. Now, all Altair and non-Altair states will simply report on the head/target attestations.
The following section details where we've removed fields and provides replacement values.
### Breaking Changes: Prometheus Metrics
Some participation metrics have been removed and replaced. Some were removed since they are no longer relevant to Altair (e.g., total attesting balance) and others replaced with gwei values instead of pre-computed values. This provides more flexibility at display-time (e.g., Grafana).
The following metrics were added as replacements:
- `beacon_participation_prev_epoch_head_attesting_gwei_total`
- `beacon_participation_prev_epoch_target_attesting_gwei_total`
- `beacon_participation_prev_epoch_source_attesting_gwei_total`
- `beacon_participation_prev_epoch_active_gwei_total`
The following metrics were removed:
- `beacon_participation_prev_epoch_attester`
- instead use `beacon_participation_prev_epoch_source_attesting_gwei_total / beacon_participation_prev_epoch_active_gwei_total`.
- `beacon_participation_prev_epoch_target_attester`
- instead use `beacon_participation_prev_epoch_target_attesting_gwei_total / beacon_participation_prev_epoch_active_gwei_total`.
- `beacon_participation_prev_epoch_head_attester`
- instead use `beacon_participation_prev_epoch_head_attesting_gwei_total / beacon_participation_prev_epoch_active_gwei_total`.
The `beacon_participation_prev_epoch_attester` endpoint has been removed. Users should instead use the pre-existing `beacon_participation_prev_epoch_target_attester`.
### Breaking Changes: HTTP API
The `/lighthouse/validator_inclusion/{epoch}/{validator_id}` endpoint loses the following fields:
- `current_epoch_attesting_gwei` (use `current_epoch_target_attesting_gwei` instead)
- `previous_epoch_attesting_gwei` (use `previous_epoch_target_attesting_gwei` instead)
The `/lighthouse/validator_inclusion/{epoch}/{validator_id}` endpoint lose the following fields:
- `is_current_epoch_attester` (use `is_current_epoch_target_attester` instead)
- `is_previous_epoch_attester` (use `is_previous_epoch_target_attester` instead)
- `is_active_in_current_epoch` becomes `is_active_unslashed_in_current_epoch`.
- `is_active_in_previous_epoch` becomes `is_active_unslashed_in_previous_epoch`.
## Additional Info
NA
## TODO
- [x] Deal with total balances
- [x] Update validator_inclusion API
- [ ] Ensure `beacon_participation_prev_epoch_target_attester` and `beacon_participation_prev_epoch_head_attester` work before Altair
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Proposed Changes
Update to the latest version of the Altair spec, which includes new tests and a tweak to the target sync aggregators.
## Additional Info
This change is _not_ required for the imminent Altair devnet, and is waiting on the merge of #2321 to unstable.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Proposed Changes
Remove the remaining Altair `FIXME`s from consensus land.
1. Implement tree hash caching for the participation lists. This required some light type manipulation, including removing the `TreeHash` bound from `CachedTreeHash` which was purely descriptive.
2. Plumb the proposer index through Altair attestation processing, to avoid calculating it for _every_ attestation (potentially 128ms on large networks). This duplicates some work from #2431, but with the aim of getting it in sooner, particularly for the Altair devnets.
3. Removes two FIXMEs related to `superstruct` and cloning, which are unlikely to be particularly detrimental and will be tracked here instead: https://github.com/sigp/superstruct/issues/5
* Adjust beacon node timeouts for validator client HTTP requests (#2352)
Resolves#2313
Provide `BeaconNodeHttpClient` with a dedicated `Timeouts` struct.
This will allow granular adjustment of the timeout duration for different calls made from the VC to the BN. These can either be a constant value, or as a ratio of the slot duration.
Improve timeout performance by using these adjusted timeout duration's only whenever a fallback endpoint is available.
Add a CLI flag called `use-long-timeouts` to revert to the old behavior.
Additionally set the default `BeaconNodeHttpClient` timeouts to the be the slot duration of the network, rather than a constant 12 seconds. This will allow it to adjust to different network specifications.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Use read_recursive locks in database (#2417)
Closes#2245
Replace all calls to `RwLock::read` in the `store` crate with `RwLock::read_recursive`.
* Unfortunately we can't run the deadlock detector on CI because it's pinned to an old Rust 1.51.0 nightly which cannot compile Lighthouse (one of our deps uses `ptr::addr_of!` which is too new). A fun side-project at some point might be to update the deadlock detector.
* The reason I think we haven't seen this deadlock (at all?) in practice is that _writes_ to the database's split point are quite infrequent, and a concurrent write is required to trigger the deadlock. The split point is only written when finalization advances, which is once per epoch (every ~6 minutes), and state reads are also quite sporadic. Perhaps we've just been incredibly lucky, or there's something about the timing of state reads vs database migration that protects us.
* I wrote a few small programs to demo the deadlock, and the effectiveness of the `read_recursive` fix: https://github.com/michaelsproul/relock_deadlock_mvp
* [The docs for `read_recursive`](https://docs.rs/lock_api/0.4.2/lock_api/struct.RwLock.html#method.read_recursive) warn of starvation for writers. I think in order for starvation to occur the database would have to be spammed with so many state reads that it's unable to ever clear them all and find time for a write, in which case migration of states to the freezer would cease. If an attack could be performed to trigger this starvation then it would likely trigger a deadlock in the current code, and I think ceasing migration is preferable to deadlocking in this extreme situation. In practice neither should occur due to protection from spammy peers at the network layer. Nevertheless, it would be prudent to run this change on the testnet nodes to check that it doesn't cause accidental starvation.
* Return more detail when invalid data is found in the DB during startup (#2445)
- Resolves#2444
Adds some more detail to the error message returned when the `BeaconChainBuilder` is unable to access or decode block/state objects during startup.
NA
* Use hardware acceleration for SHA256 (#2426)
Modify the SHA256 implementation in `eth2_hashing` so that it switches between `ring` and `sha2` to take advantage of [x86_64 SHA extensions](https://en.wikipedia.org/wiki/Intel_SHA_extensions). The extensions are available on modern Intel and AMD CPUs, and seem to provide a considerable speed-up: on my Ryzen 5950X it dropped state tree hashing times by about 30% from 35ms to 25ms (on Prater).
The extensions became available in the `sha2` crate [last year](https://www.reddit.com/r/rust/comments/hf2vcx/ann_rustcryptos_sha1_and_sha2_now_support/), and are not available in Ring, which uses a [pure Rust implementation of sha2](https://github.com/briansmith/ring/blob/main/src/digest/sha2.rs). Ring is faster on CPUs that lack the extensions so I've implemented a runtime switch to use `sha2` only when the extensions are available. The runtime switching seems to impose a miniscule penalty (see the benchmarks linked below).
* Start a release checklist (#2270)
NA
Add a checklist to the release draft created by CI. I know @michaelsproul was also working on this and I suspect @realbigsean also might have useful input.
NA
* Serious banning
* fmt
Co-authored-by: Mac L <mjladson@pm.me>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
- Resolves#2452
## Proposed Changes
I've seen a few people confused by this and I don't think the message is really worth it.
## Additional Info
NA
## Issue Addressed
#635
## Proposed Changes
- Keep attestations that reference a block we have not seen for 30secs before being re processed
- If we do import the block before that time elapses, it is reprocessed in that moment
- The first time it fails, do nothing wrt to gossipsub propagation or peer downscoring. If after being re processed it fails, downscore with a `LowToleranceError` and ignore the message.
## Issue Addressed
NA
## Proposed Changes
Adds a metric to see how many set bits are in the sync aggregate for each beacon block being imported.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Adds more detail to the log when an attestation is ignored due to a prior one being known. This will help identify which validators are causing the issue.
## Additional Info
NA
## Issue Addressed
- Resolves#2444
## Proposed Changes
Adds some more detail to the error message returned when the `BeaconChainBuilder` is unable to access or decode block/state objects during startup.
## Additional Info
NA
## Issue Addressed
Closes#2245
## Proposed Changes
Replace all calls to `RwLock::read` in the `store` crate with `RwLock::read_recursive`.
## Additional Info
* Unfortunately we can't run the deadlock detector on CI because it's pinned to an old Rust 1.51.0 nightly which cannot compile Lighthouse (one of our deps uses `ptr::addr_of!` which is too new). A fun side-project at some point might be to update the deadlock detector.
* The reason I think we haven't seen this deadlock (at all?) in practice is that _writes_ to the database's split point are quite infrequent, and a concurrent write is required to trigger the deadlock. The split point is only written when finalization advances, which is once per epoch (every ~6 minutes), and state reads are also quite sporadic. Perhaps we've just been incredibly lucky, or there's something about the timing of state reads vs database migration that protects us.
* I wrote a few small programs to demo the deadlock, and the effectiveness of the `read_recursive` fix: https://github.com/michaelsproul/relock_deadlock_mvp
* [The docs for `read_recursive`](https://docs.rs/lock_api/0.4.2/lock_api/struct.RwLock.html#method.read_recursive) warn of starvation for writers. I think in order for starvation to occur the database would have to be spammed with so many state reads that it's unable to ever clear them all and find time for a write, in which case migration of states to the freezer would cease. If an attack could be performed to trigger this starvation then it would likely trigger a deadlock in the current code, and I think ceasing migration is preferable to deadlocking in this extreme situation. In practice neither should occur due to protection from spammy peers at the network layer. Nevertheless, it would be prudent to run this change on the testnet nodes to check that it doesn't cause accidental starvation.
## Issue Addressed
Resolves#2313
## Proposed Changes
Provide `BeaconNodeHttpClient` with a dedicated `Timeouts` struct.
This will allow granular adjustment of the timeout duration for different calls made from the VC to the BN. These can either be a constant value, or as a ratio of the slot duration.
Improve timeout performance by using these adjusted timeout duration's only whenever a fallback endpoint is available.
Add a CLI flag called `use-long-timeouts` to revert to the old behavior.
## Additional Info
Additionally set the default `BeaconNodeHttpClient` timeouts to the be the slot duration of the network, rather than a constant 12 seconds. This will allow it to adjust to different network specifications.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Proposed Changes
Implement the consensus changes necessary for the upcoming Altair hard fork.
## Additional Info
This is quite a heavy refactor, with pivotal types like the `BeaconState` and `BeaconBlock` changing from structs to enums. This ripples through the whole codebase with field accesses changing to methods, e.g. `state.slot` => `state.slot()`.
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
#2377
## Proposed Changes
Implement the same code used for block root lookups (from #2376) to state root lookups in order to improve performance and reduce associated memory spikes (e.g. from certain HTTP API requests).
## Additional Changes
- Tests using `rev_iter_state_roots` and `rev_iter_block_roots` have been refactored to use their `forwards` versions instead.
- The `rev_iter_state_roots` and `rev_iter_block_roots` functions are now unused and have been removed.
- The `state_at_slot` function has been changed to use the `forwards` iterator.
## Additional Info
- Some tests still need to be refactored to use their `forwards_iter` versions. These tests start their iteration from a specific beacon state and thus use the `rev_iter_state_roots_from` and `rev_iter_block_roots_from` functions. If they can be refactored, those functions can also be removed.
This updates some older dependencies to address a few cargo audit warnings.
The majority of warnings come from network dependencies which will be addressed in #2389.
This PR contains some minor dep updates that are not network related.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
`make lint` failing on rust 1.53.0.
## Proposed Changes
1.53.0 updates
## Additional Info
I haven't figure out why yet, we were now hitting the recursion limit in a few crates. So I had to add `#![recursion_limit = "256"]` in a few places
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Proposed Changes
A user on Discord (`@ChewsMacRibs`) reported that the validator monitor was logging `WARN Attested to an incorrect head` for their validator while it was awaiting activation.
This PR modifies the monitor so that it ignores inactive validators, by the logic that they are either awaiting activation, or have already exited. Either way, there's no way for an inactive validator to have their attestations included on chain, so no need for the monitor to report on them.
## Additional Info
To reproduce the bug requires registering validator keys manually with `--validator-monitor-pubkeys`. I don't think the bug will present itself with `--validator-monitor-auto`.
## Issue Addressed
#2293
## Proposed Changes
- Modify the handler for the `eth_chainId` RPC (i.e., `get_chain_id`) to explicitly match against the Geth error string returned for pre-EIP-155 synced Geth nodes
- ~~Add a new helper function, `rpc_error_msg`, to aid in the above point~~
- Refactor `response_result` into `response_result_or_error` and patch reliant RPC handlers accordingly (thanks to @pawanjay176)
## Additional Info
Geth, as of Pangaea Expanse (v1.10.0), returns an explicit error when it is not synced past the EIP-155 block (2675000). Previously, Geth simply returned a chain ID of 0 (which was obviously much easier to handle on Lighthouse's part).
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
I am starting to see a lot of slog-async overflows (i.e., too many logs) on Prater whenever we see attestations for an unknown block. Since these logs are identical (except for peer id) and we expose volume/count of these errors via `metrics::GOSSIP_ATTESTATION_ERRORS_PER_TYPE`, I took the following actions to remove them from `DEBUG` logs:
- Push the "Attestation for unknown block" log to trace.
- Add a debug log in `search_for_block`. In effect, this should serve as a de-duped version of the previous, downgraded log.
## Additional Info
TBC
## Issue Addressed
NA
## Proposed Changes
Bump versions.
## Additional Info
This is not exactly the v1.4.0 release described in [Lighthouse Update #36](https://lighthouse.sigmaprime.io/update-36.html).
Whilst it contains:
- Beta Windows support
- A reduction in Eth1 queries
- A reduction in memory footprint
It does not contain:
- Altair
- Doppelganger Protection
- The remote signer
We have decided to release some features early. This is primarily due to the desire to allow users to benefit from the memory saving improvements as soon as possible.
## TODO
- [x] Wait for #2340, #2356 and #2376 to merge and then rebase on `unstable`.
- [x] Ensure discovery issues are fixed (see #2388)
- [x] Ensure https://github.com/sigp/lighthouse/pull/2382 is merged/removed.
- [x] Ensure https://github.com/sigp/lighthouse/pull/2383 is merged/removed.
- [x] Ensure https://github.com/sigp/lighthouse/pull/2384 is merged/removed.
- [ ] Double-check eth1 cache is carried between boots
## Issue Addressed
NA
## Proposed Changes
Reverts #2345 in the interests of getting v1.4.0 out this week. Once we have released that, we can go back to testing this again.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
When observing `jemallocator` heap profiles and Grafana, it became clear that Lighthouse is spending significant RAM/CPU on processing blocks from the RPC. On investigation, it seems that we are loading the parent of the block *before* we check to see if the block is already known. This is a big waste of resources.
This PR adds an additional `check_block_relevancy` call as the first thing we do when we try to process a `SignedBeaconBlock` via the RPC (or other similar methods). Ultimately, `check_block_relevancy` will be called again later in the block processing flow. It's a very light function and I don't think trying to optimize it out is worth the risk of a bad block slipping through.
Also adds a `New RPC block received` info log when we process a new RPC block. This seems like interesting and infrequent info.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Return a very specific error when at attestation reads shuffling from a frozen `BeaconState`. Previously, this was returning `MissingBeaconState` which indicates a much more serious issue.
## Additional Info
Since `get_inconsistent_state_for_attestation_verification_only` is only called once in `BeaconChain::with_committee_cache`, it is quite easy to reason about the impact of this change.
