## Issue Addressed
[#4259](https://github.com/sigp/lighthouse/issues/4259)
## Proposed Changes
debounce spammy `Unable to send message to the beacon processor` log messages
## Additional Info
We could potentially debounce other logs that have the potential to be "spammy".
After some feedback we decided to additionally add the following change:
create a newtype wrapper around `mpsc::Sender<BeaconWorkEvent<T>>`. When there is an error on the try_send method on the wrapper, we increase a counter metric with one label per work type.
* some blob reprocessing work
* remove ForceBlockLookup
* reorder enum match arms in sync manager
* a lot more reprocessing work
* impl logic for triggerng blob lookups along with block lookups
* deal with rpc blobs in groups per block in the da checker. don't cache missing blob ids in the da checker.
* make single block lookup generic
* more work
* add delayed processing logic and combine some requests
* start fixing some compile errors
* fix compilation in main block lookup mod
* much work
* get things compiling
* parent blob lookups
* fix compile
* revert red/stevie changes
* fix up sync manager delay message logic
* add peer usefulness enum
* should remove lookup refactor
* consolidate retry error handling
* improve peer scoring during certain failures in parent lookups
* improve retry code
* drop parent lookup if either req has a peer disconnect during download
* refactor single block processed method
* processing peer refactor
* smol bugfix
* fix some todos
* fix lints
* fix lints
* fix compile in lookup tests
* fix lints
* fix lints
* fix existing block lookup tests
* renamings
* fix after merge
* cargo fmt
* compilation fix in beacon chain tests
* fix
* refactor lookup tests to work with multiple forks and response types
* make tests into macros
* wrap availability check error
* fix compile after merge
* add random blobs
* start fixing up lookup verify error handling
* some bug fixes and the start of deneb only tests
* make tests work for all forks
* track information about peer source
* error refactoring
* improve peer scoring
* fix test compilation
* make sure blobs are sent for processing after stream termination, delete copied tests
* add some tests and fix a bug
* smol bugfixes and moar tests
* add tests and fix some things
* compile after merge
* lots of refactoring
* retry on invalid block/blob
* merge unknown parent messages before current slot lookup
* get tests compiling
* penalize blob peer on invalid blobs
* Check disk on in-memory cache miss
* Update beacon_node/beacon_chain/src/data_availability_checker/overflow_lru_cache.rs
* Update beacon_node/network/src/sync/network_context.rs
Co-authored-by: Divma <26765164+divagant-martian@users.noreply.github.com>
* fix bug in matching blocks and blobs in range sync
* pr feedback
* fix conflicts
* upgrade logs from warn to crit when we receive incorrect response in range
* synced_and_connected_within_tolerance -> should_search_for_block
* remove todo
* add data gas used and update excess data gas to u64
* Fix Broken Overflow Tests
* payload verification with commitments
* fix merge conflicts
* restore payload file
* Restore payload file
* remove todo
* add max blob commitments per block
* c-kzg lib update
* Fix ef tests
* Abstract over minimal/mainnet spec in kzg crate
* Start integrating new KZG
* checkpoint sync without alignment
* checkpoint sync without alignment
* add import
* add import
* query for checkpoint state by slot rather than state root (teku doesn't serve by state root)
* query for checkpoint state by slot rather than state root (teku doesn't serve by state root)
* loosen check
* get state first and query by most recent block root
* Revert "loosen check"
This reverts commit 069d13dd63aa794a3505db9f17bd1a6b73f0be81.
* get state first and query by most recent block root
* merge max blobs change
* simplify delay logic
* rename unknown parent sync message variants
* rename parameter, block_slot -> slot
* add some docs to the lookup module
* use interval instead of sleep
* drop request if blocks and blobs requests both return `None` for `Id`
* clean up `find_single_lookup` logic
* add lookup source enum
* clean up `find_single_lookup` logic
* add docs to find_single_lookup_request
* move LookupSource our of param where unnecessary
* remove unnecessary todo
* query for block by `state.latest_block_header.slot`
* fix lint
* fix merge transition ef tests
* fix test
* fix test
* fix observed blob sidecars test
* Add some metrics (#33)
* fix protocol limits for blobs by root
* Update Engine API for 1:1 Structure Method
* make beacon chain tests to fix devnet 6 changes
* get ckzg working and fix some tests
* fix remaining tests
* fix lints
* Fix KZG linking issues
* remove unused dep
* lockfile
* test fixes
* remove dbgs
* remove unwrap
* cleanup tx generator
* small fixes
* fixing fixes
* more self reivew
* more self review
* refactor genesis header initialization
* refactor mock el instantiations
* fix compile
* fix network test, make sure they run for each fork
* pr feedback
* fix last test (hopefully)
---------
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
Co-authored-by: Divma <26765164+divagant-martian@users.noreply.github.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
- #4293
- #4264
## Proposed Changes
*Changes largely follow those suggested in the main issue*.
- Add new routes to HTTP API
- `post_beacon_blocks_v2`
- `post_blinded_beacon_blocks_v2`
- Add new routes to `BeaconNodeHttpClient`
- `post_beacon_blocks_v2`
- `post_blinded_beacon_blocks_v2`
- Define new Eth2 common types
- `BroadcastValidation`, enum representing the level of validation to apply to blocks prior to broadcast
- `BroadcastValidationQuery`, the corresponding HTTP query string type for the above type
- ~~Define `_checked` variants of both `publish_block` and `publish_blinded_block` that enforce a validation level at a type level~~
- Add interactive tests to the `bn_http_api_tests` test target covering each validation level (to their own test module, `broadcast_validation_tests`)
- `beacon/blocks`
- `broadcast_validation=gossip`
- Invalid (400)
- Full Pass (200)
- Partial Pass (202)
- `broadcast_validation=consensus`
- Invalid (400)
- Only gossip (400)
- Only consensus pass (i.e., equivocates) (200)
- Full pass (200)
- `broadcast_validation=consensus_and_equivocation`
- Invalid (400)
- Invalid due to early equivocation (400)
- Only gossip (400)
- Only consensus (400)
- Pass (200)
- `beacon/blinded_blocks`
- `broadcast_validation=gossip`
- Invalid (400)
- Full Pass (200)
- Partial Pass (202)
- `broadcast_validation=consensus`
- Invalid (400)
- Only gossip (400)
- ~~Only consensus pass (i.e., equivocates) (200)~~
- Full pass (200)
- `broadcast_validation=consensus_and_equivocation`
- Invalid (400)
- Invalid due to early equivocation (400)
- Only gossip (400)
- Only consensus (400)
- Pass (200)
- Add a new trait, `IntoGossipVerifiedBlock`, which allows type-level guarantees to be made as to gossip validity
- Modify the structure of the `ObservedBlockProducers` cache from a `(slot, validator_index)` mapping to a `((slot, validator_index), block_root)` mapping
- Modify `ObservedBlockProducers::proposer_has_been_observed` to return a `SeenBlock` rather than a boolean on success
- Punish gossip peer (low) for submitting equivocating blocks
- Rename `BlockError::SlashablePublish` to `BlockError::SlashableProposal`
## Additional Info
This PR contains changes that directly modify how blocks are verified within the client. For more context, consult [comments in-thread](https://github.com/sigp/lighthouse/pull/4316#discussion_r1234724202).
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
Implements the `PrettyReqwestError` to wrap a `reqwest::Error` and give nicer `Debug` formatting. It also wraps the `Url` component in a `SensitiveUrl` to avoid leaking sensitive info in logs.
### Before
```
Reqwest(reqwest::Error { kind: Request, url: Url { scheme: "http", cannot_be_a_base: false, username: "", password: None, host: Some(Domain("localhost")), port: Some(9999), path: "/eth/v1/node/version", query: None, fragment: None }, source: hyper::Error(Connect, ConnectError("tcp connect error", Os { code: 61, kind: ConnectionRefused, message: "Connection refused" })) })
```
### After
```
HttpClient(url: http://localhost:9999/, kind: request, detail: error trying to connect: tcp connect error: Connection refused (os error 61))
```
## Additional Info
I've also renamed the `Reqwest` error enum variants to `HttpClient`, to give people a better chance at knowing what's going on. Reqwest is pretty odd and looks like a typo.
I've implemented it in the `eth2` and `execution_layer` crates. This should affect most logs in the VC and EE-related ones in the BN.
I think the last crate that could benefit from the is the `beacon_node/eth1` crate. I haven't updated it in this PR since its error type is not so amenable to it (everything goes into a `String`). I don't have a whole lot of time to jig around with that at the moment and I feel that this PR as it stands is a significant enough improvement to merge on its own. Leaving it as-is is fine for the time being and we can always come back for it later (or implement in-protocol deposits!).
## Issue Addressed
Resolves#3238
## Proposed Changes
Please list or describe the changes introduced by this PR.
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
## Issue Addressed
This PR adds a new `lint-fix` task to automatically fix simple Clippy warnings using `cargo clippy --fix`.
Usage:
```
make lint-fix
```
## Issue Addressed
#4386
## Proposed Changes
The original proposal described in the issue adds a new endpoint to support updating validator graffiti, but I realized we already have an endpoint that we use for updating various validator fields in memory and in the validator definitions file, so I think that would be the best place to add this to.
### API endpoint
`PATCH lighthouse/validators/{validator_pubkey}`
This endpoint updates the graffiti in both the [ validator definition file](https://lighthouse-book.sigmaprime.io/graffiti.html#2-setting-the-graffiti-in-the-validator_definitionsyml) and the in memory `InitializedValidators`. In the next block proposal, the new graffiti will be used.
Note that the [`--graffiti-file`](https://lighthouse-book.sigmaprime.io/graffiti.html#1-using-the---graffiti-file-flag-on-the-validator-client) flag has a priority over the validator definitions file, so if the caller attempts to update the graffiti while the `--graffiti-file` flag is present, the endpoint will return an error (Bad request 400).
## Tasks
- [x] Add graffiti update support to `PATCH lighthouse/validators/{validator_pubkey}`
- [x] Return error if user tries to update graffiti while the `--graffiti-flag` is set
- [x] Update Lighthouse book
## Issue Addressed
NA
## Proposed Changes
Adds the `--validator-registration-batch-size` flag to the VC to allow runtime configuration of the number of validators POSTed to the [`validator/register_validator`](https://ethereum.github.io/beacon-APIs/?urls.primaryName=dev#/Validator/registerValidator) endpoint.
There are builders (Agnostic and Eden) that are timing out with `regsiterValidator` requests with ~400 validators, even with a 9 second timeout. Exposing the batch size will help tune batch sizes to (hopefully) avoid this.
This PR should not change the behavior of Lighthouse when the new flag is not provided (i.e., the same default value is used).
## Additional Info
NA
## Proposed Changes
Remove `max-skip-slots` checks when processing blocks.
This was legacy code which was previously used in the Medalla testnet to sync to the correct fork.
With the addition of checkpoint sync which allows us to sync to any arbitrary fork, this is no longer a necessary feature, so it has been removed for simplicity.
## Additional Notes
The CLI flag and checks for attestation processing have been retained as it still may have uses in DoS protection.
Currently, the ENR of the node may not be correctly updated when specifying ipv6 fields through the CLI if an ENR exists on disk.
This remedies a bug where we were not checking for ipv6 fields when comparing whether to use an on-disk ENR or updating based on CLI configuration parameters.
This is only a minor correction to the table not properly showing up in Lighthouse book. The changes solves the formatting issue. Another change is on the link to do port-forwarding.
## Issue Addressed
Closes#4332
## Proposed Changes
Remove the `CountUnrealized` type, defaulting unrealized justification to _on_. This fixes the #4332 issue by ensuring that importing the same block to fork choice always results in the same outcome.
Finalized sync speed may be slightly impacted by this change, but that is deemed an acceptable trade-off until the optimisation from #4118 is implemented.
TODO:
- [x] Also check that the block isn't a duplicate before importing
* some blob reprocessing work
* remove ForceBlockLookup
* reorder enum match arms in sync manager
* a lot more reprocessing work
* impl logic for triggerng blob lookups along with block lookups
* deal with rpc blobs in groups per block in the da checker. don't cache missing blob ids in the da checker.
* make single block lookup generic
* more work
* add delayed processing logic and combine some requests
* start fixing some compile errors
* fix compilation in main block lookup mod
* much work
* get things compiling
* parent blob lookups
* fix compile
* revert red/stevie changes
* fix up sync manager delay message logic
* add peer usefulness enum
* should remove lookup refactor
* consolidate retry error handling
* improve peer scoring during certain failures in parent lookups
* improve retry code
* drop parent lookup if either req has a peer disconnect during download
* refactor single block processed method
* processing peer refactor
* smol bugfix
* fix some todos
* fix lints
* fix lints
* fix compile in lookup tests
* fix lints
* fix lints
* fix existing block lookup tests
* renamings
* fix after merge
* cargo fmt
* compilation fix in beacon chain tests
* fix
* refactor lookup tests to work with multiple forks and response types
* make tests into macros
* wrap availability check error
* fix compile after merge
* add random blobs
* start fixing up lookup verify error handling
* some bug fixes and the start of deneb only tests
* make tests work for all forks
* track information about peer source
* error refactoring
* improve peer scoring
* fix test compilation
* make sure blobs are sent for processing after stream termination, delete copied tests
* add some tests and fix a bug
* smol bugfixes and moar tests
* add tests and fix some things
* compile after merge
* lots of refactoring
* retry on invalid block/blob
* merge unknown parent messages before current slot lookup
* get tests compiling
* penalize blob peer on invalid blobs
* Check disk on in-memory cache miss
* Update beacon_node/beacon_chain/src/data_availability_checker/overflow_lru_cache.rs
* Update beacon_node/network/src/sync/network_context.rs
Co-authored-by: Divma <26765164+divagant-martian@users.noreply.github.com>
* fix bug in matching blocks and blobs in range sync
* pr feedback
* fix conflicts
* upgrade logs from warn to crit when we receive incorrect response in range
* synced_and_connected_within_tolerance -> should_search_for_block
* remove todo
* Fix Broken Overflow Tests
* fix merge conflicts
* checkpoint sync without alignment
* add import
* query for checkpoint state by slot rather than state root (teku doesn't serve by state root)
* get state first and query by most recent block root
* simplify delay logic
* rename unknown parent sync message variants
* rename parameter, block_slot -> slot
* add some docs to the lookup module
* use interval instead of sleep
* drop request if blocks and blobs requests both return `None` for `Id`
* clean up `find_single_lookup` logic
* add lookup source enum
* clean up `find_single_lookup` logic
* add docs to find_single_lookup_request
* move LookupSource our of param where unnecessary
* remove unnecessary todo
* query for block by `state.latest_block_header.slot`
* fix lint
* fix test
* fix test
* fix observed blob sidecars test
* PR updates
* use optional params instead of a closure
* create lookup and trigger request in separate method calls
* remove `LookupSource`
* make sure duplicate lookups are not dropped
---------
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
Co-authored-by: Divma <26765164+divagant-martian@users.noreply.github.com>
Checkpointz now supports deposit snapshot but [they only support returning them in JSON](https://github.com/ethpandaops/checkpointz/issues/74) so I've modified lighthouse to request them in JSON by default.
There's also `get_opt` & `get_opt_with_timeout` methods which seem to expect responses in JSON but were not adding `Accept: application/json` to the request headers so I fixed that as well.
Also the beacon API puts quantities in quotes so I fixed that in the snapshot JSON serialization
## Issue Addressed
Resolves#3980. Builds on work by @GeemoCandama in #4084
## Proposed Changes
Extends the `SupportedProtocol` abstraction added in Geemo's PR and attempts to fix internal versioning of requests that are mentioned in this comment https://github.com/sigp/lighthouse/pull/4084#issuecomment-1496380033
Co-authored-by: geemo <geemo@tutanota.com>
## Issue Addressed
Closes#3964
## Proposed Changes
Use the `maxperf` profile to build Windows binaries, now that Rust 1.70.0 fixed the underlying issue.
## Proposed Changes
Correct some typos in the book, also update information about withdrawals since the Mainnet will be having 700K validators in about a month
## Issue Addressed
#3510
## Proposed Changes
- Replace mime with MediaTypeList
- Remove parse_accept fn as MediaTypeList does it built-in
- Get the supported media type of the highest q-factor in a single list iteration without sorting
## Additional Info
I have addressed the suggested changes in previous [PR](https://github.com/sigp/lighthouse/pull/3520#discussion_r959048633)
Done in different PRs so that they can reviewed independently, as it's likely this won't be merged before I leave
Includes resolution for #4080
- [ ] #4299
- [ ] #4318
- [ ] #4320
Co-authored-by: Diva M <divma@protonmail.com>
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
This PR addresses issue https://github.com/sigp/lighthouse/issues/4350
## Proposed Changes
This change will enable slasher broadcast in the following cases:
No flag is passed,
`--slasher-broadcast` is passed and,
`--slasher-broadcast=true` is passed.
Only when an explicit false value is passed the slasher does not broadcast.(`--slasher-broadcast=false`).
## Additional Info
TODO
- [x] Modify CLI parsing logic
- [x] Write test
Refer to #4353
Co-authored-by: Rahul Dogra <rahulcooldogra@gmail.com>
Co-authored-by: Gua00va <105484243+Gua00va@users.noreply.github.com>
## Issue Addressed
Workaround for https://github.com/foundry-rs/foundry/issues/5115.
## Proposed Changes
Allow Anvil to be installed on Windows without errors by enabling the IPC features (which we don't use, but Anvil expects to exist).
## Issue Addressed
NA
## Proposed Changes
Downgrade a `CRIT` to an `ERRO` when there's an `Irrecoverable` error whilst publishing a blinded block.
It's quite common for builders successfully broadcast a block to the network whilst failing to respond to the BN when it publishes a signed, blinded block. The VC is currently raising a `CRIT` when this happens and I think that's excessive.
These changes have the same intent as #4073. In that PR I only managed to remove the `CRIT`s in the BN but missed this one in the VC.
I've also tidied the log messages to:
- Give them all the same title (*"Error whilst producing block"*) to help with grepping.
- Include the `block_slot` so it's easy to look up the slot in an explorer and see if it was actually skipped.
## Additional Info
This PR should not change any logic beyond logging.
## Issue Addressed
Closes#4354Closes#3987
Replaces #4305, #4283
## Proposed Changes
This switches the default slasher backend _back_ to LMDB.
If an MDBX database exists and the MDBX backend is enabled then MDBX will continue to be used. Our release binaries and Docker images will continue to include MDBX for as long as it is practical, so users of these should not notice any difference.
The main benefit is to users compiling from source and devs running tests. These users no longer have to struggle to compile MDBX and deal with the compatibility issues that arises. Similarly, devs don't need to worry about toggling feature flags in tests or risk forgetting to run the slasher tests due to backend issues.
## Issue Addressed
N/A
## Proposed Changes
This change will log the value of the relay block and the local block when the relay block is more profitable.
## Additional Info
This change will help validators understand the block selection (as it looks like the execution reward sometimes is higher that the MEV-reward).
The rationale for this change is to aid operators to better understand why a relay-block was chosen over a local block.
Looking at produced blocks (at beaconcha.in for example) it sometimes looks like the builder is making a profit just from the execution reward vs the MEV-reward, and creates the nagging question: "Could i have built this block and made that extra profit?"... The answer is probably "No, not without the extra transactions included by the relay", but by logging the value of the local block-candidate, this will no longer be an issue..
### Example (Mainnet)
https://beaconcha.in/block/17370329
MEV Block Reward: 0.17122 Ether to 0xE35bBaFa0266089f95d745d348b468622805D82B
Execution Reward: 0.17528 Ether to 0x1f9090aaE28b8a3dCeaDf281B0F12828e676c326
Difference: 0.00406 Ether
### Examples (Goerli)
https://goerli.beaconcha.in/block/9040065
MEV Block Reward: 0.56423 Ether to 0xF5794543CF6055Ae710E9c8E99E31343Cea004a8
Execution Reward: 0.56488 Ether to 0xfC0157aA4F5DB7177830ACddB3D5a9BB5BE9cc5e
Difference: 0.00065 Ether
https://goerli.beaconcha.in/block/9019921
MEV Block Reward: 1.39440 Ether to 0xF5794543CF6055Ae710E9c8E99E31343Cea004a8
Execution Reward: 1.39469 Ether to 0xfC0157aA4F5DB7177830ACddB3D5a9BB5BE9cc5e
Difference: 0.00029 Ether
https://goerli.beaconcha.in/block/9015583
MEV Block Reward: 1.04356 Ether to 0xF5794543CF6055Ae710E9c8E99E31343Cea004a8
Execution Reward: 1.04896 Ether to 0xfC0157aA4F5DB7177830ACddB3D5a9BB5BE9cc5e
Difference: 0.0054 Ether
