## Issue Addressed
NA
## Proposed Changes
- Ensure that the [target consistency check](b356f52c5c) is always performed on aggregates.
- Add a regression test.
## Additional Info
NA
This is a small PR that cleans up compiler warnings.
The most controversial change is removing the `data_dir` field from the `BeaconChainBuilder`.
It was removed because it was never read.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Co-authored-by: Herman Junge <hermanjunge@protonmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Which issue # does this PR address?
## Proposed Changes
Avoids cloning the `BeaconState` each time Prometheus scrapes our metrics (generally every 5s 😱).
I think the original motivation behind this was *"don't hold the lock on the head whilst we do computation on it"*, however I think is flawed since our computation here is so small that it'll be quicker than the clone.
The primary motivation here is to maintain a small memory footprint by holding less in memory (i.e., the cloned `BeaconState`) and to avoid the fragmentation-creep that occurs when cloning the big contiguous slabs of memory in the `BeaconState`.
I also collapsed the active/slashed/withdrawn counters into a single loop to increase efficiency.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
I noticed the following error on one of our nodes:
```
Mar 18 00:03:35 ip-xxxx lighthouse-bn[333503]: Mar 18 00:03:35.103 ERRO Unable to validate aggregate error: ObservedAttestersError(EpochTooLow { epoch: Epoch(23961), lowest_permissible_epoch: Epoch(23962) }), peer_id: 16Uiu2HAm5GL5KzPLhvfg9MBBFSpBqTVGRFSiTg285oezzWcZzwEv
```
The slot during this log was 766,815 (the last slot of the epoch). I believe this is due to an off-by-one error in `observed_attesters` where we were failing to provide enough capacity to store observations from the previous, current and next epochs. See code comments for further reasoning.
Here's a link to the spec: https://github.com/ethereum/eth2.0-specs/blob/v1.0.1/specs/phase0/p2p-interface.md#beacon_aggregate_and_proof
## Additional Info
NA
## Issue Addressed
Closes#2052
## Proposed Changes
- Refactor the attester/proposer duties endpoints in the BN
- Performance improvements
- Fixes some potential inconsistencies with the dependent root fields.
- Removes `http_api::beacon_proposer_cache` and just uses the one on the `BeaconChain` instead.
- Move the code for the proposer/attester duties endpoints into separate files, for readability.
- Refactor the `DutiesService` in the VC
- Required to reduce the delay on broadcasting new blocks.
- Gets rid of the `ValidatorDuty` shim struct that came about when we adopted the standard API.
- Separate block/attestation duty tasks so that they don't block each other when one is slow.
- In the VC, use `PublicKeyBytes` to represent validators instead of `PublicKey`. `PublicKey` is a legit crypto object whilst `PublicKeyBytes` is just a byte-array, it's much faster to clone/hash `PublicKeyBytes` and this change has had a significant impact on runtimes.
- Unfortunately this has created lots of dust changes.
- In the BN, store `PublicKeyBytes` in the `beacon_proposer_cache` and allow access to them. The HTTP API always sends `PublicKeyBytes` over the wire and the conversion from `PublicKey` -> `PublickeyBytes` is non-trivial, especially when queries have 100s/1000s of validators (like Pyrmont).
- Add the `state_processing::state_advance` mod which dedups a lot of the "apply `n` skip slots to the state" code.
- This also fixes a bug with some functions which were failing to include a state root as per [this comment](072695284f/consensus/state_processing/src/state_advance.rs (L69-L74)). I couldn't find any instance of this bug that resulted in anything more severe than keying a shuffling cache by the wrong block root.
- Swap the VC block service to use `mpsc` from `tokio` instead of `futures`. This is consistent with the rest of the code base.
~~This PR *reduces* the size of the codebase 🎉~~ It *used* to reduce the size of the code base before I added more comments.
## Observations on Prymont
- Proposer duties times down from peaks of 450ms to consistent <1ms.
- Current epoch attester duties times down from >1s peaks to a consistent 20-30ms.
- Block production down from +600ms to 100-200ms.
## Additional Info
- ~~Blocked on #2241~~
- ~~Blocked on #2234~~
## TODO
- [x] ~~Refactor this into some smaller PRs?~~ Leaving this as-is for now.
- [x] Address `per_slot_processing` roots.
- [x] Investigate slow next epoch times. Not getting added to cache on block processing?
- [x] Consider [this](072695284f/beacon_node/store/src/hot_cold_store.rs (L811-L812)) in the scenario of replacing the state roots
Co-authored-by: pawan <pawandhananjay@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Proposed Changes
While investigating an incorrect head + target vote for the epoch boundary block 708544, I noticed that the state advance failed to prime the proposer cache, as per these logs:
```
Mar 09 21:42:47.448 DEBG Subscribing to subnet target_slot: 708544, subnet: Y, service: attestation_service
Mar 09 21:49:08.063 DEBG Advanced head state one slot current_slot: 708543, state_slot: 708544, head_root: 0xaf5e69de09f384ee3b4fb501458b7000c53bb6758a48817894ec3d2b030e3e6f, service: state_advance
Mar 09 21:49:08.063 DEBG Completed state advance initial_slot: 708543, advanced_slot: 708544, head_root: 0xaf5e69de09f384ee3b4fb501458b7000c53bb6758a48817894ec3d2b030e3e6f, service: state_advance
Mar 09 21:49:14.787 DEBG Proposer shuffling cache miss block_slot: 708544, block_root: 0x9b14bf68667ab1d9c35e6fd2c95ff5d609aa9e8cf08e0071988ae4aa00b9f9fe, parent_slot: 708543, parent_root: 0xaf5e69de09f384ee3b4fb501458b7000c53bb6758a48817894ec3d2b030e3e6f, service: beacon
Mar 09 21:49:14.800 DEBG Successfully processed gossip block root: 0x9b14bf68667ab1d9c35e6fd2c95ff5d609aa9e8cf08e0071988ae4aa00b9f9fe, slot: 708544, graffiti: , service: beacon
Mar 09 21:49:14.800 INFO New block received hash: 0x9b14…f9fe, slot: 708544
Mar 09 21:49:14.984 DEBG Head beacon block slot: 708544, root: 0x9b14…f9fe, finalized_epoch: 22140, finalized_root: 0x28ec…29a7, justified_epoch: 22141, justified_root: 0x59db…e451, service: beacon
Mar 09 21:49:15.055 INFO Unaggregated attestation validator: XXXXX, src: api, slot: 708544, epoch: 22142, delay_ms: 53, index: Y, head: 0xaf5e69de09f384ee3b4fb501458b7000c53bb6758a48817894ec3d2b030e3e6f, service: val_mon
Mar 09 21:49:17.001 DEBG Slot timer sync_state: Synced, current_slot: 708544, head_slot: 708544, head_block: 0x9b14…f9fe, finalized_epoch: 22140, finalized_root: 0x28ec…29a7, peers: 55, service: slot_notifier
```
The reason for this is that the condition was backwards, so that whole block of code was unreachable.
Looking at the attestations for the block included in the block after, we can see that lots of validators missed it. Some of them may be Lighthouse v1.1.1-v1.2.0-rc.0, but it's probable that they would have missed even with the proposer cache primed, given how late the block 708544 arrived (the cache miss occurred 3.787s after the slot start): https://beaconcha.in/block/708545#attestations
## Issue Addressed
NA
## Proposed Changes
- Use the pre-states from #2174 during block production.
- Running this on Pyrmont shows block production times dropping from ~550ms to ~150ms.
- Create `crit` and `warn` logs when a block is published to the API later than we expect.
- On mainnet we are issuing a warn if the block is published more than 1s later than the slot start and a crit for more than 3s.
- Rename some methods on the `SnapshotCache` for clarity.
- Add the ability to pass the state root to `BeaconChain::produce_block_on_state` to avoid computing a state root. This is a very common LH optimization.
- Add a metric that tracks how late we broadcast blocks received from the HTTP API. This is *technically* a duplicate of a `ValidatorMonitor` log, but I wanted to have it for the case where we aren't monitoring validators too.
## Issue Addressed
Closes#1787
## Proposed Changes
* Abstract the `ValidatorPubkeyCache` over a "backing" which is either a file (legacy), or the database.
* Implement a migration from schema v2 to schema v3, whereby the contents of the cache file are copied to the DB, and then the file is deleted. The next release to include this change must be a minor version bump, and we will need to warn users of the inability to downgrade (this is our first DB schema change since mainnet genesis).
* Move the schema migration code from the `store` crate into the `beacon_chain` crate so that it can access the datadir and the `ValidatorPubkeyCache`, etc. It gets injected back into the `store` via a closure (similar to what we do in fork choice).
## Issue Addressed
NA
## Problem this PR addresses
There's an issue where Lighthouse is banning a lot of peers due to the following sequence of events:
1. Gossip block 0xabc arrives ~200ms early
- It is propagated across the network, with respect to [`MAXIMUM_GOSSIP_CLOCK_DISPARITY`](https://github.com/ethereum/eth2.0-specs/blob/v1.0.0/specs/phase0/p2p-interface.md#why-is-there-maximum_gossip_clock_disparity-when-validating-slot-ranges-of-messages-in-gossip-subnets).
- However, it is not imported to our database since the block is early.
2. Attestations for 0xabc arrive, but the block was not imported.
- The peer that sent the attestation is down-voted.
- Each unknown-block attestation causes a score loss of 1, the peer is banned at -100.
- When the peer is on an attestation subnet there can be hundreds of attestations, so the peer is banned quickly (before the missed block can be obtained via rpc).
## Potential solutions
I can think of three solutions to this:
1. Wait for attestation-queuing (#635) to arrive and solve this.
- Easy
- Not immediate fix.
- Whilst this would work, I don't think it's a perfect solution for this particular issue, rather (3) is better.
1. Allow importing blocks with a tolerance of `MAXIMUM_GOSSIP_CLOCK_DISPARITY`.
- Easy
- ~~I have implemented this, for now.~~
1. If a block is verified for gossip propagation (i.e., signature verified) and it's within `MAXIMUM_GOSSIP_CLOCK_DISPARITY`, then queue it to be processed at the start of the appropriate slot.
- More difficult
- Feels like the best solution, I will try to implement this.
**This PR takes approach (3).**
## Changes included
- Implement the `block_delay_queue`, based upon a [`DelayQueue`](https://docs.rs/tokio-util/0.6.3/tokio_util/time/delay_queue/struct.DelayQueue.html) which can store blocks until it's time to import them.
- Add a new `DelayedImportBlock` variant to the `beacon_processor::WorkEvent` enum to handle this new event.
- In the `BeaconProcessor`, refactor a `tokio::select!` to a struct with an explicit `Stream` implementation. I experienced some issues with `tokio::select!` in the block delay queue and I also found it hard to debug. I think this explicit implementation is nicer and functionally equivalent (apart from the fact that `tokio::select!` randomly chooses futures to poll, whereas now we're deterministic).
- Add a testing framework to the `beacon_processor` module that tests this new block delay logic. I also tested a handful of other operations in the beacon processor (attns, slashings, exits) since it was super easy to copy-pasta the code from the `http_api` tester.
- To implement these tests I added the concept of an optional `work_journal_tx` to the `BeaconProcessor` which will spit out a log of events. I used this in the tests to ensure that things were happening as I expect.
- The tests are a little racey, but it's hard to avoid that when testing timing-based code. If we see CI failures I can revise. I haven't observed *any* failures due to races on my machine or on CI yet.
- To assist with testing I allowed for directly setting the time on the `ManualSlotClock`.
- I gave the `beacon_processor::Worker` a `Toolbox` for two reasons; (a) it avoids changing tons of function sigs when you want to pass a new object to the worker and (b) it seemed cute.
## Issue Addressed
NA
## Proposed Changes
Add an optimization to perform `per_slot_processing` from the *leading-edge* of block processing to the *trailing-edge*. Ultimately, this allows us to import the block at slot `n` faster because we used the tail-end of slot `n - 1` to perform `per_slot_processing`.
Additionally, add a "block proposer cache" which allows us to cache the block proposer for some epoch. Since we're now doing trailing-edge `per_slot_processing`, we can prime this cache with the values for the next epoch before those blocks arrive (assuming those blocks don't have some weird forking).
There were several ancillary changes required to achieve this:
- Remove the `state_root` field of `BeaconSnapshot`, since there's no need to know it on a `pre_state` and in all other cases we can just read it from `block.state_root()`.
- This caused some "dust" changes of `snapshot.beacon_state_root` to `snapshot.beacon_state_root()`, where the `BeaconSnapshot::beacon_state_root()` func just reads the state root from the block.
- Rename `types::ShuffingId` to `AttestationShufflingId`. I originally did this because I added a `ProposerShufflingId` struct which turned out to be not so useful. I thought this new name was more descriptive so I kept it.
- Address https://github.com/ethereum/eth2.0-specs/pull/2196
- Add a debug log when we get a block with an unknown parent. There was previously no logging around this case.
- Add a function to `BeaconState` to compute all proposers for an epoch without re-computing the active indices for each slot.
## Additional Info
- ~~Blocked on #2173~~
- ~~Blocked on #2179~~ That PR was wrapped into this PR.
- There's potentially some places where we could avoid computing the proposer indices in `per_block_processing` but I haven't done this here. These would be an optimization beyond the issue at hand (improving block propagation times) and I think this PR is already doing enough. We can come back for that later.
## TODO
- [x] Tidy, improve comments.
- [x] ~~Try avoid computing proposer index in `per_block_processing`?~~
## Issue Addressed
resolves#2129resolves#2099
addresses some of #1712
unblocks #2076
unblocks #2153
## Proposed Changes
- Updates all the dependencies mentioned in #2129, except for web3. They haven't merged their tokio 1.0 update because they are waiting on some dependencies of their own. Since we only use web3 in tests, I think updating it in a separate issue is fine. If they are able to merge soon though, I can update in this PR.
- Updates `tokio_util` to 0.6.2 and `bytes` to 1.0.1.
- We haven't made a discv5 release since merging tokio 1.0 updates so I'm using a commit rather than release atm. **Edit:** I think we should merge an update of `tokio_util` to 0.6.2 into discv5 before this release because it has panic fixes in `DelayQueue` --> PR in discv5: https://github.com/sigp/discv5/pull/58
## Additional Info
tokio 1.0 changes that required some changes in lighthouse:
- `interval.next().await.is_some()` -> `interval.tick().await`
- `sleep` future is now `!Unpin` -> https://github.com/tokio-rs/tokio/issues/3028
- `try_recv` has been temporarily removed from `mpsc` -> https://github.com/tokio-rs/tokio/issues/3350
- stream features have moved to `tokio-stream` and `broadcast::Receiver::into_stream()` has been temporarily removed -> `https://github.com/tokio-rs/tokio/issues/2870
- I've copied over the `BroadcastStream` wrapper from this PR, but can update to use `tokio-stream` once it's merged https://github.com/tokio-rs/tokio/pull/3384
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Which issue # does this PR address?
## Proposed Changes
Replaces use of `format!` in `slog` logging with it's special no-allocation `?` and `%` shortcuts. According to a `heaptrack` analysis today over about a period of an hour, this will reduce temporary allocations by at least 4%.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
Adds some metrics to track delays regarding:
- LH processing of blocks
- delays receiving blocks from other nodes.
## Additional Info
NA
## Issue Addressed
- Resolves#2064
## Proposed Changes
Adds a `ValidatorMonitor` struct which provides additional logging and Grafana metrics for specific validators.
Use `lighthouse bn --validator-monitor` to automatically enable monitoring for any validator that hits the [subnet subscription](https://ethereum.github.io/eth2.0-APIs/#/Validator/prepareBeaconCommitteeSubnet) HTTP API endpoint.
Also, use `lighthouse bn --validator-monitor-pubkeys` to supply a list of validators which will always be monitored.
See the new docs included in this PR for more info.
## TODO
- [x] Track validator balance, `slashed` status, etc.
- [x] ~~Register slashings in current epoch, not offense epoch~~
- [ ] Publish Grafana dashboard, update TODO link in docs
- [x] ~~#2130 is merged into this branch, resolve that~~
## Issue Addressed
The non-finality period on Pyrmont between epochs [`9114`](https://pyrmont.beaconcha.in/epoch/9114) and [`9182`](https://pyrmont.beaconcha.in/epoch/9182) was contributed to by all the `lighthouse_team` validators going down. The nodes saw excessive CPU and RAM usage, resulting in the system to kill the `lighthouse bn` process. The `Restart=on-failure` directive for `systemd` caused the process to bounce in ~10-30m intervals.
Diagnosis with `heaptrack` showed that the `BeaconChain::produce_unaggregated_attestation` function was calling `store::beacon_state::get_full_state` and sometimes resulting in a tree hash cache allocation. These allocations were approximately the size of the hosts physical memory and still allocated when `lighthouse bn` was killed by the OS.
There was no CPU analysis (e.g., `perf`), but the `BeaconChain::produce_unaggregated_attestation` is very CPU-heavy so it is reasonable to assume it is the cause of the excessive CPU usage, too.
## Proposed Changes
`BeaconChain::produce_unaggregated_attestation` has two paths:
1. Fast path: attesting to the head slot or later.
2. Slow path: attesting to a slot earlier than the head block.
Path (2) is the only path that calls `store::beacon_state::get_full_state`, therefore it is the path causing this excessive CPU/RAM usage.
This PR removes the current functionality of path (2) and replaces it with a static error (`BeaconChainError::AttestingPriorToHead`).
This change reduces the generality of `BeaconChain::produce_unaggregated_attestation` (and therefore [`/eth/v1/validator/attestation_data`](https://ethereum.github.io/eth2.0-APIs/#/Validator/produceAttestationData)), but I argue that this functionality is an edge-case and arguably a violation of the [Honest Validator spec](https://github.com/ethereum/eth2.0-specs/blob/dev/specs/phase0/validator.md).
It's possible that a validator goes back to a prior slot to "catch up" and submit some missed attestations. This change would prevent such behaviour, returning an error. My concerns with this catch-up behaviour is that it is:
- Not specified as "honest validator" attesting behaviour.
- Is behaviour that is risky for slashing (although, all validator clients *should* have slashing protection and will eventually fail if they do not).
- It disguises clock-sync issues between a BN and VC.
## Additional Info
It's likely feasible to implement path (2) if we implement some sort of caching mechanism. This would be a multi-week task and this PR gets the issue patched in the short term. I haven't created an issue to add path (2), instead I think we should implement it if we get user-demand.
## Issue Addressed
NA
## Proposed Changes
Copied from #2083, changes the config milliseconds_per_slot to seconds_per_slot to avoid errors when slot duration is not a multiple of a second. To avoid deserializing old serialized data (with milliseconds instead of seconds) the Serialize and Deserialize derive got removed from the Spec struct (isn't currently used anyway).
This PR replaces #2083 for the purpose of fixing a merge conflict without requiring the input of @blacktemplar.
## Additional Info
NA
Co-authored-by: blacktemplar <blacktemplar@a1.net>
## Issue Addressed
NA
## Proposed Changes
As per #2100, uses derives from the sturm library to implement AsRef<str> and AsStaticRef to easily get str values from enums without creating new Strings. Furthermore unifies all attestation error counter into one IntCounterVec vector.
These works are originally by @blacktemplar, I've just created this PR so I can resolve some merge conflicts.
## Additional Info
NA
Co-authored-by: blacktemplar <blacktemplar@a1.net>
## Issue Addressed
`test_dht_persistence` failing
## Proposed Changes
Bind `NetworkService::start` to an underscore prefixed variable rather than `_`. `_` was causing it to be dropped immediately
This was failing 5/100 times before this update, but I haven't been able to get it to fail after updating it
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
`cargo audit` is failing because of a potential for an overflow in the version of `smallvec` we're using
## Proposed Changes
Update to the latest version of `smallvec`, which has the fix
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Proposed Changes
`@potuz` on the Eth R&D Discord observed that Lighthouse blocks on Pyrmont were always arriving at other nodes after at least 1 second. Part of this could be due to processing and slow propagation, but metrics also revealed that the Lighthouse nodes were usually taking 400-600ms to even just produce a block before broadcasting it.
I tracked the slowness down to the lack of a pre-built tree hash cache (THC) on the states being used for block production. This was due to using the head state for block production, which lacks a THC in order to keep fork choice fast (cloning a THC takes at least 30ms for 100k validators). This PR modifies block production to clone a state from the snapshot cache rather than the head, which speeds things up by 200-400ms by avoiding the tree hash cache rebuild. In practice this seems to have cut block production time down to 300ms or less. Ideally we could _remove_ the snapshot from the cache (and save the 30ms), but it is required for when we re-process the block after signing it with the validator client.
## Alternatives
I experimented with 2 alternatives to this approach, before deciding on it:
* Alternative 1: ensure the `head` has a tree hash cache. This is too slow, as it imposes a +30ms hit on fork choice, which currently takes ~5ms (with occasional spikes).
* Alternative 2: use `Arc<BeaconSnapshot>` in the snapshot cache and share snapshots between the cache and the `head`. This made fork choice blazing fast (1ms), and block production the same as in this PR, but had a negative impact on block processing which I don't think is worth it. It ended up being necessary to clone the full state from the snapshot cache during block production, imposing the +30ms penalty there _as well_ as in block production.
In contract, the approach in this PR should only impact block production, and it improves it! Yay for pareto improvements 🎉
## Additional Info
This commit (ac59dfa) is currently running on all the Lighthouse Pyrmont nodes, and I've added a dashboard to the Pyrmont grafana instance with the metrics.
In future work we should optimise the attestation packing, which consumes around 30-60ms and is now a substantial contributor to the total.
## Issue Addressed
Closes#2048
## Proposed Changes
* Broadcast slashings when the `--slasher-broadcast` flag is provided.
* In the process of implementing this I refactored the slasher service into its own crate so that it could access the network code without creating a circular dependency. I moved the responsibility for putting slashings into the op pool into the service as well, as it makes sense for it to handle the whole slashing lifecycle.
## Issue Addressed
Closes#2028
Replaces #2059
## Proposed Changes
If writing to the database fails while importing a block, revert fork choice to the last version stored on disk. This prevents fork choice from being ahead of the blocks on disk. Having fork choice ahead is particularly bad if it is later successfully written to disk, because it renders the database corrupt (see #2028).
## Additional Info
* This mitigation might fail if the head+fork choice haven't been persisted yet, which can only happen at first startup (see #2067)
* This relies on it being OK for the head tracker to be ahead of fork choice. I figure this is tolerable because blocks only get added to the head tracker after successfully being written on disk _and_ to fork choice, so even if fork choice reverts a little bit, when the pruning algorithm runs, those blocks will still be on disk and OK to prune. The pruning algorithm also doesn't rely on heads being unique, technically it's OK for multiple blocks from the same linear chain segment to be present in the head tracker. This begs the question of #1785 (i.e. things would be simpler with the head tracker out of the way). Alternatively, this PR could just revert the head tracker as well (I'll look into this tomorrow).
## Issue Addressed
Closes#2042
## Proposed Changes
Pass blocks that fail gossip verification to the slasher. Blocks that are successfully verified are not passed immediately, but will be passed as part of full block verification.
## Issue Addressed
Resolves#1434 (this is the last major feature in the standard spec. There are only a couple of places we may be off-spec due to recent spec changes or ongoing discussion)
Partly addresses #1669
## Proposed Changes
- remove the websocket server
- remove the `TeeEventHandler` and `NullEventHandler`
- add server sent events according to the eth2 API spec
## Additional Info
This is according to the currently unmerged PR here: https://github.com/ethereum/eth2.0-APIs/pull/117
Co-authored-by: realbigsean <seananderson33@gmail.com>
Fixes a couple of low hanging fruits.
- Fixes#2037
- `validators-dir` and `secrets-dir` flags don't really need to depend upon each other
- Fixes#2006 and Fixes#1995
## Issue Addressed
NA
## Proposed Changes
- Log about eth1 whilst waiting for genesis.
- For the block and deposit caches, update them after each download instead of when *all* downloads are complete.
- This prevents the case where a single timeout error can cause us to drop *all* previously download blocks/deposits.
- Set `max_log_requests_per_update` to avoid timeouts due to very large log counts in a response.
- Set `max_blocks_per_update` to prevent a single update of the block cache to download an unreasonable number of blocks.
- This shouldn't have any affect in normal use, it's just a safe-guard against bugs.
- Increase the timeout for eth1 calls from 15s to 60s, as per @pawanjay176's experience with Infura.
## Additional Info
NA
## Description
This PR updates Lighthouse to tokio 0.3. It includes a number of dependency updates and some structural changes as to how we create and spawn tasks.
This also brings with it a number of various improvements:
- Discv5 update
- Libp2p update
- Fix for recompilation issues
- Improved UPnP port mapping handling
- Futures dependency update
- Log downgrade to traces for rejecting peers when we've reached our max
Co-authored-by: blacktemplar <blacktemplar@a1.net>
This is an implementation of a slasher that lives inside the BN and can be enabled via `lighthouse bn --slasher`.
Features included in this PR:
- [x] Detection of attester slashing conditions (double votes, surrounds existing, surrounded by existing)
- [x] Integration into Lighthouse's attestation verification flow
- [x] Detection of proposer slashing conditions
- [x] Extraction of attestations from blocks as they are verified
- [x] Compression of chunks
- [x] Configurable history length
- [x] Pruning of old attestations and blocks
- [x] More tests
Future work:
* Focus on a slice of history separate from the most recent N epochs (e.g. epochs `current - K` to `current - M`)
* Run out-of-process
* Ingest attestations from the chain without a resync
Design notes are here https://hackmd.io/@sproul/HJSEklmPL
## Issue Addressed
Closes#1719
## Proposed Changes
Lift the internal `RwLock`s and `Mutex`es from the `Observed*` data structures to resolve the race conditions described in #1719.
Most of this work was done by @paulhauner on his `lift-locks` branch, I merely updated it for the current `master` and checked over it.
## Additional Info
I think it would be prudent to test this on a testnet or two before mainnet launch, just to be sure that the extra lock contention doesn't negatively impact performance.
## Issue Addressed
NA
## Proposed Changes
- Caches later blocks than is required by `ETH1_FOLLOW_DISTANCE`.
- Adds logging to `warn` if the eth1 cache is insufficiently primed.
- Use `max_by_key` instead of `max_by` in `BeaconChain::Eth1Chain` since it's simpler.
- Rename `voting_period_start_timestamp` to `voting_target_timestamp` for accuracy.
## Additional Info
The reason for eating into the `ETH1_FOLLOW_DISTANCE` and caching blocks that are closer to the head is due to possibility for `SECONDS_PER_ETH1_BLOCK` to be incorrect (as is the case for the Pyrmont testnet on Goerli).
If `SECONDS_PER_ETH1_BLOCK` is too short, we'll skip back too far from the head and skip over blocks that would be valid [`is_candidate_block`](https://github.com/ethereum/eth2.0-specs/blob/v1.0.0/specs/phase0/validator.md#eth1-data) blocks. This was the case on the Pyrmont testnet and resulted in Lighthouse choosing blocks that were about 30 minutes older than is ideal.
## Issue Addressed
*Should* address #1917
## Proposed Changes
Stops the `BackgroupMigrator` rx channel from backing up with big `BeaconState` messages.
Looking at some logs from my Medalla node, we can see a discrepancy between the head finalized epoch and the migrator finalized epoch:
```
Nov 17 16:50:21.606 DEBG Head beacon block slot: 129214, root: 0xbc7a…0b99, finalized_epoch: 4033, finalized_root: 0xf930…6562, justified_epoch: 4035, justified_root: 0x206b…9321, service: beacon
Nov 17 16:50:21.626 DEBG Batch processed service: sync, processed_blocks: 43, last_block_slot: 129214, chain: 8274002112260436595, first_block_slot: 129153, batch_epoch: 4036
Nov 17 16:50:21.626 DEBG Chain advanced processing_target: 4036, new_start: 4036, previous_start: 4034, chain: 8274002112260436595, service: sync
Nov 17 16:50:22.162 DEBG Completed batch received awaiting_batches: 5, blocks: 47, epoch: 4048, chain: 8274002112260436595, service: sync
Nov 17 16:50:22.162 DEBG Requesting batch start_slot: 129601, end_slot: 129664, downloaded: 0, processed: 0, state: Downloading(16Uiu2HAmG3C3t1McaseReECjAF694tjVVjkDoneZEbxNhWm1nZaT, 0 blocks, 1273), epoch: 4050, chain: 8274002112260436595, service: sync
Nov 17 16:50:22.654 DEBG Database compaction complete service: beacon
Nov 17 16:50:22.655 INFO Starting database pruning new_finalized_epoch: 2193, old_finalized_epoch: 2192, service: beacon
```
I believe this indicates that the migrator rx has a backed-up queue of `MigrationNotification` items which each contain a `BeaconState`.
## TODO
- [x] Remove finalized state requirement for op-pool
## Proposed Changes
In an attempt to fix OOM issues and database consistency issues observed by some users after the introduction of compaction in v0.3.4, this PR makes the following changes:
* Run compaction less often: roughly every 1024 epochs, including after long periods of non-finality. I think the division check proposed by Paul is pretty solid, and ensures we don't miss any events where we should be compacting. LevelDB lacks an easy way to check the size of the DB, which would be another good trigger.
* Make it possible to disable the compaction on finalization using `--auto-compact-db=false`
* Make it possible to trigger a manual, single-threaded foreground compaction on start-up using `--compact-db`
* Downgrade the pruning log to `DEBUG`, as it's particularly noisy during sync
I would like to ship these changes to affected users ASAP, and will document them further in the Advanced Database section of the book if they prove effective.
## Issue Addressed
Resolves#1809Resolves#1824Resolves#1818Resolves#1828 (hopefully)
## Proposed Changes
- add `validator_index` to the proposer duties endpoint
- add the ability to query for historical proposer duties
- `StateId` deserialization now fails with a 400 warp rejection
- add the `validator_balances` endpoint
- update the `aggregate_and_proofs` endpoint to accept an array
- updates the attester duties endpoint from a `GET` to a `POST`
- reduces the number of times we query for proposer duties from once per slot per validator to only once per slot
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
Closes#1866
## Proposed Changes
* Compact the database on finalization. This removes the deleted states from disk completely. Because it happens in the background migrator, it doesn't block other database operations while it runs. On my Medalla node it took about 1 minute and shrank the database from 90GB to 9GB.
* Fix an inefficiency in the pruning algorithm where it would always use the genesis checkpoint as the `old_finalized_checkpoint` when running for the first time after start-up. This would result in loading lots of states one-at-a-time back to genesis, and storing a lot of block roots in memory. The new code stores the old finalized checkpoint on disk and only uses genesis if no checkpoint is already stored. This makes it both backwards compatible _and_ forwards compatible -- no schema change required!
* Introduce two new `INFO` logs to indicate when pruning has started and completed. Users seem to want to know this information without enabling debug logs!
## Issue Addressed
- Related to #1691
## Proposed Changes
Adds the following API endpoints:
- `GET lighthouse/eth1/syncing`: status about how synced we are with Eth1.
- `GET lighthouse/eth1/block_cache`: all locally cached eth1 blocks.
- `GET lighthouse/eth1/deposit_cache`: all locally cached eth1 deposits.
Additionally:
- Moves some types from the `beacon_node/eth1` to the `common/eth2` crate, so they can be used in the API without duplication.
- Allow `update_deposit_cache` and `update_block_cache` to take an optional head block number to avoid duplicate requests.
## Additional Info
TBC
## Issue Addressed
Closes#800Closes#1713
## Proposed Changes
Implement the temporary state storage algorithm described in #800. Specifically:
* Add `DBColumn::BeaconStateTemporary`, for storing 0-length temporary marker values.
* Store intermediate states immediately as they are created, marked temporary. Delete the temporary flag if the block is processed successfully.
* Add a garbage collection process to delete leftover temporary states on start-up.
* Bump the database schema version to 2 so that a DB with temporary states can't accidentally be used with older versions of the software. The auto-migration is a no-op, but puts in place some infra that we can use for future migrations (e.g. #1784)
## Additional Info
There are two known race conditions, one potentially causing permanent faults (hopefully rare), and the other insignificant.
### Race 1: Permanent state marked temporary
EDIT: this has been fixed by the addition of a lock around the relevant critical section
There are 2 threads that are trying to store 2 different blocks that share some intermediate states (e.g. they both skip some slots from the current head). Consider this sequence of events:
1. Thread 1 checks if state `s` already exists, and seeing that it doesn't, prepares an atomic commit of `(s, s_temporary_flag)`.
2. Thread 2 does the same, but also gets as far as committing the state txn, finishing the processing of its block, and _deleting_ the temporary flag.
3. Thread 1 is (finally) scheduled again, and marks `s` as temporary with its transaction.
4.
a) The process is killed, or thread 1's block fails verification and the temp flag is not deleted. This is a permanent failure! Any attempt to load state `s` will fail... hope it isn't on the main chain! Alternatively (4b) happens...
b) Thread 1 finishes, and re-deletes the temporary flag. In this case the failure is transient, state `s` will disappear temporarily, but will come back once thread 1 finishes running.
I _hope_ that steps 1-3 only happen very rarely, and 4a even more rarely. It's hard to know
This once again begs the question of why we're using LevelDB (#483), when it clearly doesn't care about atomicity! A ham-fisted fix would be to wrap the hot and cold DBs in locks, which would bring us closer to how other DBs handle read-write transactions. E.g. [LMDB only allows one R/W transaction at a time](https://docs.rs/lmdb/0.8.0/lmdb/struct.Environment.html#method.begin_rw_txn).
### Race 2: Temporary state returned from `get_state`
I don't think this race really matters, but in `load_hot_state`, if another thread stores a state between when we call `load_state_temporary_flag` and when we call `load_hot_state_summary`, then we could end up returning that state even though it's only a temporary state. I can't think of any case where this would be relevant, and I suspect if it did come up, it would be safe/recoverable (having data is safer than _not_ having data).
This could be fixed by using a LevelDB read snapshot, but that would require substantial changes to how we read all our values, so I don't think it's worth it right now.
## Issue Addressed
Closes#1769Closes#1708
## Proposed Changes
Tweaks the op pool pruning so that the attestation pool is pruned against the wall-clock epoch instead of the finalized state's epoch. This should reduce the unbounded growth that we've seen during periods without finality.
Also fixes up the voluntary exit pruning as raised in #1708.
## Issue Addressed
Closes#1548
## Proposed Changes
Optimizes attester slashing choice by choosing the ones that cover the most amount of validators slashed, with the highest effective balances
## Additional Info
Initial pass, need to write a test for it
## Issue Addressed
Resolves#1776
## Proposed Changes
The beacon chain builder was using the canonical head's state root for the `genesis_state_root` field.
## Additional Info
## Issue Addressed
Closes#1557
## Proposed Changes
Modify the pruning algorithm so that it mutates the head-tracker _before_ committing the database transaction to disk, and _only if_ all the heads to be removed are still present in the head-tracker (i.e. no concurrent mutations).
In the process of writing and testing this I also had to make a few other changes:
* Use internal mutability for all `BeaconChainHarness` functions (namely the RNG and the graffiti), in order to enable parallel calls (see testing section below).
* Disable logging in harness tests unless the `test_logger` feature is turned on
And chose to make some clean-ups:
* Delete the `NullMigrator`
* Remove type-based configuration for the migrator in favour of runtime config (simpler, less duplicated code)
* Use the non-blocking migrator unless the blocking migrator is required. In the store tests we need the blocking migrator because some tests make asserts about the state of the DB after the migration has run.
* Rename `validators_keypairs` -> `validator_keypairs` in the `BeaconChainHarness`
## Testing
To confirm that the fix worked, I wrote a test using [Hiatus](https://crates.io/crates/hiatus), which can be found here:
https://github.com/michaelsproul/lighthouse/tree/hiatus-issue-1557
That test can't be merged because it inserts random breakpoints everywhere, but if you check out that branch you can run the test with:
```
$ cd beacon_node/beacon_chain
$ cargo test --release --test parallel_tests --features test_logger
```
It should pass, and the log output should show:
```
WARN Pruning deferred because of a concurrent mutation, message: this is expected only very rarely!
```
## Additional Info
This is a backwards-compatible change with no impact on consensus.
## Issue Addressed
- Resolves#1706
## Proposed Changes
Updates dependencies across the workspace. Any crate that was not able to be brought to the latest version is listed in #1712.
## Additional Info
NA
* Initial rebase
* Remove old code
* Correct release tests
* Rebase commit
* Remove eth2-testnet dep on eth2libp2p
* Remove crates lost in rebase
* Remove unused dep
## Issue Addressed
NA
## Proposed Changes
Addresses an interesting DoS vector raised by @protolambda by verifying that the head and target are consistent when processing aggregate attestations. This check prevents us from loading very old target blocks and doing lots of work to skip them to the current slot.
## Additional Info
NA
This commit was modified by Paul H whilst rebasing master onto
v0.3.0-staging
Adding UPnP support will help grow the DHT by allowing NAT traversal for peers with UPnP supported routers.
Using IGD library: https://docs.rs/igd/0.10.0/igd/
Adding the the libp2p tcp port and discovery udp port. If this fails it simply logs the attempt and moves on
Co-authored-by: Age Manning <Age@AgeManning.com>
This commit was edited by Paul H when rebasing from master to
v0.3.0-staging.
Solution 2 proposed here: https://github.com/sigp/lighthouse/issues/1435#issuecomment-692317639
- Adds an optional `--wss-checkpoint` flag that takes a string `root:epoch`
- Verify that the given checkpoint exists in the chain, or that the the chain syncs through this checkpoint. If not, shutdown and prompt the user to purge state before restarting.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
Closes#673
## Proposed Changes
Store a schema version in the database so that future releases can check they're running against a compatible database version. This would also enable automatic migration on breaking database changes, but that's left as future work.
The database config is also stored in the database so that the `slots_per_restore_point` value can be checked for consistency, which closes#673
- Resolves#1550
- Resolves#824
- Resolves#825
- Resolves#1131
- Resolves#1411
- Resolves#1256
- Resolve#1177
- Includes the `ShufflingId` struct initially defined in #1492. That PR is now closed and the changes are included here, with significant bug fixes.
- Implement the https://github.com/ethereum/eth2.0-APIs in a new `http_api` crate using `warp`. This replaces the `rest_api` crate.
- Add a new `common/eth2` crate which provides a wrapper around `reqwest`, providing the HTTP client that is used by the validator client and for testing. This replaces the `common/remote_beacon_node` crate.
- Create a `http_metrics` crate which is a dedicated server for Prometheus metrics (they are no longer served on the same port as the REST API). We now have flags for `--metrics`, `--metrics-address`, etc.
- Allow the `subnet_id` to be an optional parameter for `VerifiedUnaggregatedAttestation::verify`. This means it does not need to be provided unnecessarily by the validator client.
- Move `fn map_attestation_committee` in `mod beacon_chain::attestation_verification` to a new `fn with_committee_cache` on the `BeaconChain` so the same cache can be used for obtaining validator duties.
- Add some other helpers to `BeaconChain` to assist with common API duties (e.g., `block_root_at_slot`, `head_beacon_block_root`).
- Change the `NaiveAggregationPool` so it can index attestations by `hash_tree_root(attestation.data)`. This is a requirement of the API.
- Add functions to `BeaconChainHarness` to allow it to create slashings and exits.
- Allow for `eth1::Eth1NetworkId` to go to/from a `String`.
- Add functions to the `OperationPool` to allow getting all objects in the pool.
- Add function to `BeaconState` to check if a committee cache is initialized.
- Fix bug where `seconds_per_eth1_block` was not transferring over from `YamlConfig` to `ChainSpec`.
- Add the `deposit_contract_address` to `YamlConfig` and `ChainSpec`. We needed to be able to return it in an API response.
- Change some uses of serde `serialize_with` and `deserialize_with` to a single use of `with` (code quality).
- Impl `Display` and `FromStr` for several BLS fields.
- Check for clock discrepancy when VC polls BN for sync state (with +/- 1 slot tolerance). This is not intended to be comprehensive, it was just easy to do.
- See #1434 for a per-endpoint overview.
- Seeking clarity here: https://github.com/ethereum/eth2.0-APIs/issues/75
- [x] Add docs for prom port to close#1256
- [x] Follow up on this #1177
- [x] ~~Follow up with #1424~~ Will fix in future PR.
- [x] Follow up with #1411
- [x] ~~Follow up with #1260~~ Will fix in future PR.
- [x] Add quotes to all integers.
- [x] Remove `rest_types`
- [x] Address missing beacon block error. (#1629)
- [x] ~~Add tests for lighthouse/peers endpoints~~ Wontfix
- [x] ~~Follow up with validator status proposal~~ Tracked in #1434
- [x] Unify graffiti structs
- [x] ~~Start server when waiting for genesis?~~ Will fix in future PR.
- [x] TODO in http_api tests
- [x] Move lighthouse endpoints off /eth/v1
- [x] Update docs to link to standard
- ~~Blocked on #1586~~
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Closes#1680
## Proposed Changes
This PR fixes a race condition in beacon node start-up whereby the pubkey cache could be created by the beacon chain builder before the `PersistedBeaconChain` was stored to disk. When the node restarted, it would find the persisted chain missing, and attempt to start from scratch, creating a new pubkey cache in the process. This call to `ValidatorPubkeyCache::new` would fail if the file already existed (which it did). I changed the behaviour so that pubkey cache initialization now doesn't care whether there's a file already in existence (it's only a cache after all). Instead it will truncate and recreate the file in the race scenario described.
## Issue Addressed
NA
## Proposed Changes
There are four new conditions introduced in v0.12.3:
1. _[REJECT]_ The attestation's epoch matches its target -- i.e. `attestation.data.target.epoch ==
compute_epoch_at_slot(attestation.data.slot)`
1. _[REJECT]_ The attestation's target block is an ancestor of the block named in the LMD vote -- i.e.
`get_ancestor(store, attestation.data.beacon_block_root, compute_start_slot_at_epoch(attestation.data.target.epoch)) == attestation.data.target.root`
1. _[REJECT]_ The committee index is within the expected range -- i.e. `data.index < get_committee_count_per_slot(state, data.target.epoch)`.
1. _[REJECT]_ The number of aggregation bits matches the committee size -- i.e.
`len(attestation.aggregation_bits) == len(get_beacon_committee(state, data.slot, data.index))`.
This PR implements new logic to suit (1) and (2). Tests are added for (3) and (4), although they were already implicitly enforced.
## Additional Info
- There's a bit of edge-case with target root verification that I raised here: https://github.com/ethereum/eth2.0-specs/pull/2001#issuecomment-699246659
- I've had to add an `--ignore` to `cargo audit` to get CI to pass. See https://github.com/sigp/lighthouse/issues/1669
## Issue Addressed
- Resolves#1616
## Proposed Changes
If we look at the function which persists fork choice and the canonical head to disk:
1db8daae0c/beacon_node/beacon_chain/src/beacon_chain.rs (L234-L280)
There is a race-condition which might cause the canonical head and fork choice values to be out-of-sync.
I believe this is the cause of #1616. I managed to recreate the issue and produce a database that was unable to sync under the `master` branch but able to sync with this branch.
These new changes solve the issue by ignoring the persisted `canonical_head_block_root` value and instead getting fork choice to generate it. This ensures that the canonical head is in-sync with fork choice.
## Additional Info
This is hotfix method that leaves some crusty code hanging around. Once this PR is merged (to satisfy the v0.2.x users) we should later update and merge #1638 so we can have a clean fix for the v0.3.x versions.
## Issue Addressed
- Resolves#1616
## Proposed Changes
Fixes a bug where we are unable to read the finalized block from fork choice.
## Detail
I had made an assumption that the finalized block always has a parent root of `None`:
e5fc6bab48/consensus/fork_choice/src/fork_choice.rs (L749-L752)
This was a faulty assumption, we don't set parent *roots* to `None`. Instead we *sometimes* set parent *indices* to `None`, depending if this pruning condition is satisfied:
e5fc6bab48/consensus/proto_array/src/proto_array.rs (L229-L232)
The bug manifested itself like this:
1. We attempt to get the finalized block from fork choice
1. We try to check that the block is descendant of the finalized block (note: they're the same block).
1. We expect the parent root to be `None`, but it's actually the parent root of the finalized root.
1. We therefore end up checking if the parent of the finalized root is a descendant of itself. (note: it's an *ancestor* not a *descendant*).
1. We therefore declare that the finalized block is not a descendant of (or eq to) the finalized block. Bad.
## Additional Info
In reflection, I made a poor assumption in the quest to obtain a probably negligible performance gain. The performance gain wasn't worth the risk and we got burnt.
## Issue Addressed
Partly addresses #1547
## Proposed Changes
This fix addresses the missing attestations at slot 0 of an epoch (also sometimes slot 1 when slot 0 was skipped).
There are 2 cases:
1. BN receives the block for the attestation slot after 4 seconds (1/3rd of the slot).
2. No block is proposed for this slot.
In both cases, when we produce the attestation, we pass the head state to the
`produce_unaggregated_attestation_for_block` function here
9833eca024/beacon_node/beacon_chain/src/beacon_chain.rs (L845-L850)
Since we don't advance the state in this function, we set `attestation.data.source = state.current_justified_checkpoint` which is atleast 2 epochs lower than current_epoch(wall clock epoch).
This attestation is invalid and cannot be included in a block because of this assert from the spec:
```python
if data.target.epoch == get_current_epoch(state):
assert data.source == state.current_justified_checkpoint
state.current_epoch_attestations.append(pending_attestation)
```
https://github.com/ethereum/eth2.0-specs/blob/dev/specs/phase0/beacon-chain.md#attestations
This PR changes the `produce_unaggregated_attestation_for_block` function to ensure that it advances the state before producing the attestation at the new epoch.
Running this on my node, have missed 0 attestations across all 8 of my validators in a 100 epoch period 🎉
To compare, I was missing ~14 attestations across all 8 validators in the same 100 epoch period before the fix.
Will report missed attestations if any after running for another 100 epochs tomorrow.
Converts the graffiti binary data to string before printing to logs.
## Issue Addressed
#1566
## Proposed Changes
Rather than converting graffiti to a vector the binary data less the last character is passed to String::from_utf_lossy(). This then allows us to call the to_string() function directly to give us the string
## Additional Info
Rust skills are fairly weak
The PR:
* Adds the ability to generate a crucial test scenario that isn't possible with `BeaconChainHarness` (i.e. two blocks occupying the same slot; previously forks necessitated skipping slots):
* New testing API: Instead of repeatedly calling add_block(), you generate a sorted `Vec<Slot>` and leave it up to the framework to generate blocks at those slots.
* Jumping backwards to an earlier epoch is a hard error, so that tests necessarily generate blocks in a epoch-by-epoch manner.
* Configures the test logger so that output is printed on the console in case a test fails. The logger also plays well with `--nocapture`, contrary to the existing testing framework
* Rewrites existing fork pruning tests to use the new API
* Adds a tests that triggers finalization at a non epoch boundary slot
* Renamed `BeaconChainYoke` to `BeaconChainTestingRig` because the former has been too confusing
* Fixed multiple tests (e.g. `block_production_different_shuffling_long`, `delete_blocks_and_states`, `shuffling_compatible_simple_fork`) that relied on a weird (and accidental) feature of the old `BeaconChainHarness` that attestations aren't produced for epochs earlier than the current one, thus masking potential bugs in test cases.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Closes#1488
## Proposed Changes
* Prevent the pruning algorithm from over-eagerly deleting states at skipped slots when they are shared with the canonical chain.
* Add `debug` logging to the pruning algorithm so we have so better chance of debugging future issues from logs.
* Modify the handling of the "finalized state" in the beacon chain, so that it's always the state at the first slot of the finalized epoch (previously it was the state at the finalized block). This gives database pruning a clearer and cleaner view of things, and will marginally impact the pruning of the op pool, observed proposers, etc (in ways that are safe as far as I can tell).
* Remove duplicated `RevertedFinalizedEpoch` check from `after_finalization`
* Delete useless and unused `max_finality_distance`
* Add tests that exercise pruning with shared states at skip slots
* Delete unnecessary `block_strategy` argument from `add_blocks` and friends in the test harness (will likely conflict with #1380 slightly, sorry @adaszko -- but we can fix that)
* Bonus: add a `BeaconChain::with_head` method. I didn't end up needing it, but it turned out quite nice, so I figured we could keep it?
## Additional Info
Any users who have experienced pruning errors on Medalla will need to resync after upgrading to a release including this change. This should end unbounded `chain_db` growth! 🎉
## Issue Addressed
NA
## Proposed Changes
Sets the default max skips to 700 so that it can cover the 693 slot skip from `80894 - 80201`.
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
- Fixes a mistake I made in #1530 which resulted us in *not* rejecting attestations that we intended to reject.
- Adds skip-slot checks for blocks earlier in import process, so it rejects gossip and RPC blocks.
## Additional Info
NA
## Proposed Changes
To mitigate the impact of minority forks on RAM and disk usage, this change rejects blocks whose parent lies more than 320 slots (10 epochs, ~1 hour) in the past. The behaviour is configurable via `lighthouse bn --max-skip-slots N`, and can be turned off entirely using `--max-skip-slots none`.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
- Adds a new function to allow getting a state with a bad state root history for attestation verification. This reduces unnecessary tree hashing during attestation processing, which accounted for 23% of memory allocations (by bytes) in a recent `heaptrack` observation.
- Don't clone caches on intermediate epoch-boundary states during block processing.
- Reject blocks that are known to fork choice earlier during gossip processing, instead of waiting until after state has been loaded (this only happens in edge-case).
- Avoid multiple re-allocations by creating a "forced" exact size iterator.
## Additional Info
NA
## Issue Addressed
- Resolves#1451
## Proposed Changes
- Restricts the `contains_block` and `contains_block` so they only indicate a block is present if it descends from the finalized root. This helps to ensure that fork choice never points to a block that has been pruned from the database.
- Resolves#1451
- Before importing a block, double-check that its parent is known and a descendant of the finalized root.
- Split a big, monolithic block verification test into smaller tests.
## Additional Notes
I suspect there would be a craftier way to do the `is_descendant_of_finalized` check, but we're a bit tight on time now and we can optimize later if it starts showing in benches.
## TODO
- [x] Tests
## Issue Addressed
#1419
## Proposed Changes
Creates a `--graffiti` cli flag in the validator client. If the flag is set, it overrides graffiti in the beacon node.
## Additional Info
## Issue Addressed
NA
## Proposed Changes
- When producing a block, go and ensure every attestation in the naive aggregation pool is included in the operation pool. This should help us increase the number of useful attestations in a block.
- Lift the `RwLock`s inside `NaiveAggregationPool` up into a single high-level lock. There were race conditions in the existing setup and it was hard to reason about.
## Additional Info
NA
## Issue Addressed
#1028
A bit late, but I think if `BlockError` had a kind (the current `BlockError` minus everything on the variants that comes directly from the block) and the original block, more clones could be removed
## Issue Addressed
NA
## Proposed Changes
- Moves the git-based versioning we were doing into the `lighthouse_version` crate in `common`.
- Removes the `beacon_node/version` crate, replacing it with `lighthouse_version`.
- Bumps the version to `v0.2.0`.
## Additional Info
There are now two types of version string:
1. `const VERSION: &str = Lighthouse/v0.2.0-1419501f2+`
1. `version_with_platform() = Lighthouse/v0.2.0-1419501f2+/x86_64-linux`
(1) is handy cause it's a `const` and shorter. (2) has platform info so it's more useful. Note that the plus-sign (`+`) indicates the the git commit is dirty (it used to be `(modified)` but I had to shorten it to fit into graffiti).
These version strings are now included on:
- `lighthouse --version`
- `lcli --version`
- `curl localhost:5052/node/version`
- p2p messages when we communicate our version
You can update the version by changing this constant (version is not related to a `Cargo.toml`):
b9ad7102d5/common/lighthouse_version/src/lib.rs (L4-L15)
## Issue Addressed
NA
## Proposed Changes
- Refactor the `bls` crate to support multiple BLS "backends" (e.g., milagro, blst, etc).
- Removes some duplicate, unused code in `common/rest_types/src/validator.rs`.
- Removes the old "upgrade legacy keypairs" functionality (these were unencrypted keys that haven't been supported for a few testnets, no one should be using them anymore).
## Additional Info
Most of the files changed are just inconsequential changes to function names.
## TODO
- [x] Optimization levels
- [x] Infinity point: https://github.com/supranational/blst/issues/11
- [x] Ensure milagro *and* blst are tested via CI
- [x] What to do with unsafe code?
- [x] Test infinity point in signature sets
## Issue Addressed
This PR makes the `Eth1Chain::use_dummy_backend` field private. I believe this could be good to ensure the consistency of a Eth1Chain instance. 💡
## Issue Addressed
Closes#1319
## Proposed Changes
This issue:
1. Allows users to edit their Graffiti via the cli option `--graffiti`. If the graffiti is too long, lighthouse will not start and throw an error message. Otherwise, it will set the Graffiti to be the one provided by the user, right-padded with 0s.
2. Create a new `Graffiti` type and unify the code around it. With this type, everything is enforced at compile-time, and the code can be (I think...) panic-free! :)
## Additional info
Currently, only `&str` are supported, as this is the returned type by `.arg("graffiti")`.
Since this is user-input, I tried being as careful as I could. This is also why I created the `Graffiti` type, to make sure I could check as much as possible at compile time.
* Bake in Altona testnet (without genesis state)
* Add sig verification, without optimization
* Start integration with genesis service
* Update config.yml
* Fix eth2_testnet_config test
* Stop using default spec in genesis
* Fix lcli compile error
* Update min genesis time
* Fix typo
* Process exits and slashings off the network
* Fix rest_api tests
* Add op verification tests
* Add tests for pruning of slashings in the op pool
* Address Paul's review comments
* Update `milagro_bls` to new release (#1183)
* Update milagro_bls to new release
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* Tidy up fake cryptos
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* move SecretHash to bls and put plaintext back
Signed-off-by: Kirk Baird <baird.k@outlook.com>
* Update v0.12.0 to v0.12.1
* Add compute_subnet_for_attestation
* Replace CommitteeIndex topic with Attestation
* Fix warnings
* Fix attestation service tests
* fmt
* Appease clippy
* return error from validator_subscriptions
* move state out of loop
* Fix early break on error
* Get state from slot clock
* Fix beacon state in attestation tests
* Add failing test for lookahead > 1
* Minor change
* Address some review comments
* Add subnet verification to beacon chain
* Move subnet verification to processor
* Pass committee_count_at_slot to ValidatorDuty and ValidatorSubscription
* Pass subnet id for publishing attestations
* Fix attestation service tests
* Fix more tests
* Fix fork choice test
* Remove unused code
* Remove more unused and expensive code
Co-authored-by: Kirk Baird <baird.k@outlook.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Age Manning <Age@AgeManning.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Layer do_atomically() abstractions properly
* Reduce allocs and DRY get_key_for_col()
* Parameterize HotColdDB with hot and cold item stores
* -impl Store for MemoryStore
* Replace Store uses with HotColdDB
* Ditch Store trait
* cargo fmt
* Style fix
* Readd missing dep that broke the build
* Add logging on shutdown
* Replace tokio::spawn with handle.spawn
* Upgrade tokio
* Add a task executor
* Beacon chain tasks use task executor
* Validator client tasks use task executor
* Rename runtime_handle to executor
* Add duration histograms; minor fixes
* Cleanup
* Fix logs
* Fix tests
* Remove random file
* Get enr dependency instead of libp2p
* Address some review comments
* Libp2p takes a TaskExecutor
* Ugly fix libp2p tests
* Move TaskExecutor to own file
* Upgrade Dockerfile rust version
* Minor fixes
* Revert "Ugly fix libp2p tests"
This reverts commit 58d4bb690f52de28d893943b7504d2d0c6621429.
* Pretty fix libp2p tests
* Add spawn_without_exit; change Counter to Gauge
* Tidy
* Move log from RuntimeContext to TaskExecutor
* Fix errors
* Replace histogram with int_gauge for async tasks
* Fix todo
* Fix memory leak in test by exiting all spawned tasks at the end
* Update state processing for v0.12
* Fix EF test runners for v0.12
* Fix some tests
* Fix broken attestation verification test
* More test fixes
* Fix typo found in review
* Remove redundant method
* Pull out a method out of a struct
* More precise db access abstractions
* Move fake trait method out of it
* cargo fmt
* Fix compilation error after refactoring
* Move another fake method out the Store trait
* Get rid of superfluous method
* Fix refactoring bug
* Rename: SimpleStoreItem -> StoreItem
* Get rid of the confusing DiskStore type alias
* Get rid of SimpleDiskStore type alias
* Correction: A method took both self and a ref to Self
* Port eth1 lib to use stable futures
* Port eth1_test_rig to stable futures
* Port eth1 tests to stable futures
* Port genesis service to stable futures
* Port genesis tests to stable futures
* Port beacon_chain to stable futures
* Port lcli to stable futures
* Fix eth1_test_rig (#1014)
* Fix lcli
* Port timer to stable futures
* Fix timer
* Port websocket_server to stable futures
* Port notifier to stable futures
* Add TODOS
* Update hashmap hashset to stable futures
* Adds panic test to hashset delay
* Port remote_beacon_node to stable futures
* Fix lcli merge conflicts
* Non rpc stuff compiles
* protocol.rs compiles
* Port websockets, timer and notifier to stable futures (#1035)
* Fix lcli
* Port timer to stable futures
* Fix timer
* Port websocket_server to stable futures
* Port notifier to stable futures
* Add TODOS
* Port remote_beacon_node to stable futures
* Partial eth2-libp2p stable future upgrade
* Finished first round of fighting RPC types
* Further progress towards porting eth2-libp2p adds caching to discovery
* Update behaviour
* RPC handler to stable futures
* Update RPC to master libp2p
* Network service additions
* Fix the fallback transport construction (#1102)
* Correct warning
* Remove hashmap delay
* Compiling version of eth2-libp2p
* Update all crates versions
* Fix conversion function and add tests (#1113)
* Port validator_client to stable futures (#1114)
* Add PH & MS slot clock changes
* Account for genesis time
* Add progress on duties refactor
* Add simple is_aggregator bool to val subscription
* Start work on attestation_verification.rs
* Add progress on ObservedAttestations
* Progress with ObservedAttestations
* Fix tests
* Add observed attestations to the beacon chain
* Add attestation observation to processing code
* Add progress on attestation verification
* Add first draft of ObservedAttesters
* Add more tests
* Add observed attesters to beacon chain
* Add observers to attestation processing
* Add more attestation verification
* Create ObservedAggregators map
* Remove commented-out code
* Add observed aggregators into chain
* Add progress
* Finish adding features to attestation verification
* Ensure beacon chain compiles
* Link attn verification into chain
* Integrate new attn verification in chain
* Remove old attestation processing code
* Start trying to fix beacon_chain tests
* Split adding into pools into two functions
* Add aggregation to harness
* Get test harness working again
* Adjust the number of aggregators for test harness
* Fix edge-case in harness
* Integrate new attn processing in network
* Fix compile bug in validator_client
* Update validator API endpoints
* Fix aggreagation in test harness
* Fix enum thing
* Fix attestation observation bug:
* Patch failing API tests
* Start adding comments to attestation verification
* Remove unused attestation field
* Unify "is block known" logic
* Update comments
* Supress fork choice errors for network processing
* Add todos
* Tidy
* Add gossip attn tests
* Disallow test harness to produce old attns
* Comment out in-progress tests
* Partially address pruning tests
* Fix failing store test
* Add aggregate tests
* Add comments about which spec conditions we check
* Dont re-aggregate
* Split apart test harness attn production
* Fix compile error in network
* Make progress on commented-out test
* Fix skipping attestation test
* Add fork choice verification tests
* Tidy attn tests, remove dead code
* Remove some accidentally added code
* Fix clippy lint
* Rename test file
* Add block tests, add cheap block proposer check
* Rename block testing file
* Add observed_block_producers
* Tidy
* Switch around block signature verification
* Finish block testing
* Remove gossip from signature tests
* First pass of self review
* Fix deviation in spec
* Update test spec tags
* Start moving over to hashset
* Finish moving observed attesters to hashmap
* Move aggregation pool over to hashmap
* Make fc attn borrow again
* Fix rest_api compile error
* Fix missing comments
* Fix monster test
* Uncomment increasing slots test
* Address remaining comments
* Remove unsafe, use cfg test
* Remove cfg test flag
* Fix dodgy comment
* Revert "Update hashmap hashset to stable futures"
This reverts commit d432378a3cc5cd67fc29c0b15b96b886c1323554.
* Revert "Adds panic test to hashset delay"
This reverts commit 281502396fc5b90d9c421a309c2c056982c9525b.
* Ported attestation_service
* Ported duties_service
* Ported fork_service
* More ports
* Port block_service
* Minor fixes
* VC compiles
* Update TODOS
* Borrow self where possible
* Ignore aggregates that are already known.
* Unify aggregator modulo logic
* Fix typo in logs
* Refactor validator subscription logic
* Avoid reproducing selection proof
* Skip HTTP call if no subscriptions
* Rename DutyAndState -> DutyAndProof
* Tidy logs
* Print root as dbg
* Fix compile errors in tests
* Fix compile error in test
* Re-Fix attestation and duties service
* Minor fixes
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Network crate update to stable futures
* Port account_manager to stable futures (#1121)
* Port account_manager to stable futures
* Run async fns in tokio environment
* Port rest_api crate to stable futures (#1118)
* Port rest_api lib to stable futures
* Reduce tokio features
* Update notifier to stable futures
* Builder update
* Further updates
* Convert self referential async functions
* stable futures fixes (#1124)
* Fix eth1 update functions
* Fix genesis and client
* Fix beacon node lib
* Return appropriate runtimes from environment
* Fix test rig
* Refactor eth1 service update
* Upgrade simulator to stable futures
* Lighthouse compiles on stable futures
* Remove println debugging statement
* Update libp2p service, start rpc test upgrade
* Update network crate for new libp2p
* Update tokio::codec to futures_codec (#1128)
* Further work towards RPC corrections
* Correct http timeout and network service select
* Use tokio runtime for libp2p
* Revert "Update tokio::codec to futures_codec (#1128)"
This reverts commit e57aea924acf5cbabdcea18895ac07e38a425ed7.
* Upgrade RPC libp2p tests
* Upgrade secio fallback test
* Upgrade gossipsub examples
* Clean up RPC protocol
* Test fixes (#1133)
* Correct websocket timeout and run on os thread
* Fix network test
* Clean up PR
* Correct tokio tcp move attestation service tests
* Upgrade attestation service tests
* Correct network test
* Correct genesis test
* Test corrections
* Log info when block is received
* Modify logs and update attester service events
* Stable futures: fixes to vc, eth1 and account manager (#1142)
* Add local testnet scripts
* Remove whiteblock script
* Rename local testnet script
* Move spawns onto handle
* Fix VC panic
* Initial fix to block production issue
* Tidy block producer fix
* Tidy further
* Add local testnet clean script
* Run cargo fmt
* Tidy duties service
* Tidy fork service
* Tidy ForkService
* Tidy AttestationService
* Tidy notifier
* Ensure await is not suppressed in eth1
* Ensure await is not suppressed in account_manager
* Use .ok() instead of .unwrap_or(())
* RPC decoding test for proto
* Update discv5 and eth2-libp2p deps
* Fix lcli double runtime issue (#1144)
* Handle stream termination and dialing peer errors
* Correct peer_info variant types
* Remove unnecessary warnings
* Handle subnet unsubscription removal and improve logigng
* Add logs around ping
* Upgrade discv5 and improve logging
* Handle peer connection status for multiple connections
* Improve network service logging
* Improve logging around peer manager
* Upgrade swarm poll centralise peer management
* Identify clients on error
* Fix `remove_peer` in sync (#1150)
* remove_peer removes from all chains
* Remove logs
* Fix early return from loop
* Improved logging, fix panic
* Partially correct tests
* Stable futures: Vc sync (#1149)
* Improve syncing heuristic
* Add comments
* Use safer method for tolerance
* Fix tests
* Stable futures: Fix VC bug, update agg pool, add more metrics (#1151)
* Expose epoch processing summary
* Expose participation metrics to prometheus
* Switch to f64
* Reduce precision
* Change precision
* Expose observed attesters metrics
* Add metrics for agg/unagg attn counts
* Add metrics for gossip rx
* Add metrics for gossip tx
* Adds ignored attns to prom
* Add attestation timing
* Add timer for aggregation pool sig agg
* Add write lock timer for agg pool
* Add more metrics to agg pool
* Change map lock code
* Add extra metric to agg pool
* Change lock handling in agg pool
* Change .write() to .read()
* Add another agg pool timer
* Fix for is_aggregator
* Fix pruning bug
Co-authored-by: pawan <pawandhananjay@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Improve error handling in block iteration
* Introduce atomic DB operations
* Fix race condition
An invariant was violated: For every block hash in head_tracker, that
block is accessible from the store.
* Fix parallelism bug in exit processing
Also:
* Remove parallelism for all other operations except deposit merkle proofs
* Improve exit tests
* Fix broken attestation test
Closes#1090
* Allow for generating block/pre/post states from some unit tests (#1123)
* Add post-state checks, comments
* Add state_transition_vectors crate
* Integrate new testing crate with CI
* Add readme
* Add additional valid tests
* Remove ExitTests (they were moved to new crate)
* Small test fixes
* Delete incorrect saturating_sub in slash_validator
And clean-up the balance increase/decrease functions to look more like the spec.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Add PH & MS slot clock changes
* Account for genesis time
* Add progress on duties refactor
* Add simple is_aggregator bool to val subscription
* Start work on attestation_verification.rs
* Add progress on ObservedAttestations
* Progress with ObservedAttestations
* Fix tests
* Add observed attestations to the beacon chain
* Add attestation observation to processing code
* Add progress on attestation verification
* Add first draft of ObservedAttesters
* Add more tests
* Add observed attesters to beacon chain
* Add observers to attestation processing
* Add more attestation verification
* Create ObservedAggregators map
* Remove commented-out code
* Add observed aggregators into chain
* Add progress
* Finish adding features to attestation verification
* Ensure beacon chain compiles
* Link attn verification into chain
* Integrate new attn verification in chain
* Remove old attestation processing code
* Start trying to fix beacon_chain tests
* Split adding into pools into two functions
* Add aggregation to harness
* Get test harness working again
* Adjust the number of aggregators for test harness
* Fix edge-case in harness
* Integrate new attn processing in network
* Fix compile bug in validator_client
* Update validator API endpoints
* Fix aggreagation in test harness
* Fix enum thing
* Fix attestation observation bug:
* Patch failing API tests
* Start adding comments to attestation verification
* Remove unused attestation field
* Unify "is block known" logic
* Update comments
* Supress fork choice errors for network processing
* Add todos
* Tidy
* Add gossip attn tests
* Disallow test harness to produce old attns
* Comment out in-progress tests
* Partially address pruning tests
* Fix failing store test
* Add aggregate tests
* Add comments about which spec conditions we check
* Dont re-aggregate
* Split apart test harness attn production
* Fix compile error in network
* Make progress on commented-out test
* Fix skipping attestation test
* Add fork choice verification tests
* Tidy attn tests, remove dead code
* Remove some accidentally added code
* Fix clippy lint
* Rename test file
* Add block tests, add cheap block proposer check
* Rename block testing file
* Add observed_block_producers
* Tidy
* Switch around block signature verification
* Finish block testing
* Remove gossip from signature tests
* First pass of self review
* Fix deviation in spec
* Update test spec tags
* Start moving over to hashset
* Finish moving observed attesters to hashmap
* Move aggregation pool over to hashmap
* Make fc attn borrow again
* Fix rest_api compile error
* Fix missing comments
* Fix monster test
* Uncomment increasing slots test
* Address remaining comments
* Remove unsafe, use cfg test
* Remove cfg test flag
* Fix dodgy comment
* Ignore aggregates that are already known.
* Unify aggregator modulo logic
* Fix typo in logs
* Refactor validator subscription logic
* Avoid reproducing selection proof
* Skip HTTP call if no subscriptions
* Rename DutyAndState -> DutyAndProof
* Tidy logs
* Print root as dbg
* Fix compile errors in tests
* Fix compile error in test
* Address compiler warning
* Prune abandoned fork choice forks
* New approach to pruning
* Wrap some block hashes in a newtype pattern
For increased type safety.
* Add Graphviz chain dump emitter for debugging
* Fix broken test case
* Make prunes_abandoned_forks use real DiskStore
* Mark finalized blocks in the GraphViz output
* Refine debug stringification of Slot and Epoch
Before this commit: print!("{:?}", Slot(123)) == "Slot(\n123\n)".
After this commit: print!("{:?", Slot(123)) == "Slot(123)".
* Simplify build_block()
* Rewrite test case using more composable test primitives
* Working rewritten test case
* Tighten fork prunning test checks
* Add another pruning test case
* Bugfix: Finalized blocks weren't always properly detected
* Pruning: Add pruning_does_not_touch_blocks_prior_to_finalization test case
* Tighten pruning tests: check if heads are tracked properly
* Add a failing test case for a buggy scenario
* Change name of function to a more accurate one
* Fix failing test case
* Test case: Were skipped slots' states pruned?
* Style fix: Simplify dereferencing
* Tighten pruning tests: check if abandoned states are deleted
* Towards atomicity of db ops
* Correct typo
* Prune also skipped slots' states
* New logic for handling skipped states
* Make skipped slots test pass
* Post conflict resolution fixes
* Formatting fixes
* Tests passing
* Block hashes in Graphviz node labels
* Removed unused changes
* Fix bug with states having < SlotsPerHistoricalRoot roots
* Consolidate State/BlockRootsIterator for pruning
* Address review feedback
* Fix a bug in pruning tests
* Detach prune_abandoned_forks() from its object
* Move migrate.rs from store to beacon_chain
* Move forks pruning onto a background thread
* Bugfix: Heads weren't pruned when prune set contained only the head
* Rename: freeze_to_state() -> process_finalization()
* Eliminate redundant function parameter
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
* Start updating types
* WIP
* Signature hacking
* Existing EF tests passing with fake_crypto
* Updates
* Delete outdated API spec
* The refactor continues
* It compiles
* WIP test fixes
* All release tests passing bar genesis state parsing
* Update and test YamlConfig
* Update to spec v0.10 compatible BLS
* Updates to BLS EF tests
* Add EF test for AggregateVerify
And delete unused hash2curve tests for uncompressed points
* Update EF tests to v0.10.1
* Use optional block root correctly in block proc
* Use genesis fork in deposit domain. All tests pass
* Cargo fmt
* Fast aggregate verify test
* Update REST API docs
* Cargo fmt
* Fix unused import
* Bump spec tags to v0.10.1
* Add `seconds_per_eth1_block` to chainspec
* Update to timestamp based eth1 voting scheme
* Return None from `get_votes_to_consider` if block cache is empty
* Handle overflows in `is_candidate_block`
* Revert to failing tests
* Fix eth1 data sets test
* Choose default vote according to spec
* Fix collect_valid_votes tests
* Fix `get_votes_to_consider` to choose all eligible blocks
* Uncomment winning_vote tests
* Add comments; remove unused code
* Reduce seconds_per_eth1_block for simulation
* Addressed review comments
* Add test for default vote case
* Fix logs
* Remove unused functions
* Meter default eth1 votes
* Fix comments
* Address review comments; remove unused dependency
* Add first attempt at attestation proc. re-write
* Add version 2 of attestation processing
* Minor fixes
* Add validator pubkey cache
* Make get_indexed_attestation take a committee
* Link signature processing into new attn verification
* First working version
* Ensure pubkey cache is updated
* Add more metrics, slight optimizations
* Clone committee cache during attestation processing
* Update shuffling cache during block processing
* Remove old commented-out code
* Fix shuffling cache insert bug
* Used indexed attestation in fork choice
* Restructure attn processing, add metrics
* Add more detailed metrics
* Tidy, fix failing tests
* Fix failing tests, tidy
* Disable/delete two outdated tests
* Add new Pubkeys struct to signature_sets
* Refactor with functional approach
* Update beacon chain
* Remove decompressed member from pubkey bytes
* Add hashmap for indices lookup
* Change `get_attesting_indices` to use Vec
* Fix failing test
* Tidy
* Add pubkey cache persistence file
* Add more comments
* Integrate persistence file into builder
* Add pubkey cache tests
* Add data_dir to beacon chain builder
* Remove Option in pubkey cache persistence file
* Ensure consistency between datadir/data_dir
* Fix failing network test
* Tidy
* Fix todos
* Improve tests
* Split up block processing metrics
* Tidy
* Refactor get_pubkey_from_state
* Remove commented-out code
* Add BeaconChain::validator_pubkey
* Use Option::filter
* Remove Box
* Comment out tests that fail due to hard-coded
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
Co-authored-by: pawan <pawandhananjay@gmail.com>
* Refactor `Attestation` production
* Add constant
* Start refactor for aggregation
* Return early when no attesting validators
* Refactor into individual functions
* Tidy, add comments
* Add first draft of NaiveAggregationPool
* Further progress on naive aggregation pool
* Fix compile errors in VC
* Change locking logic for naive pool
* Introduce AttesationType
* Add pruning, comments
* Add MAX_ATTESTATIONS_PER_SLOT restriction
* Add pruning based on slot
* Update BN for new aggregation fns
* Fix test compile errors
* Fix failing rest_api test
* Move SignedAggregateAndProof into own file
* Update docs, fix warning
* Tidy some formatting in validator API
* Remove T::default_spec from signing
* Fix failing rest test
* Tidy
* Add test, fix bug
* Improve naive pool tests
* Add max attestations test
* Revert changes to the op_pool
* Refactor timer
* Merge #913
* Correct release tests
* Completed release test corrections
* Initial work on upgrading discovery
* Updates discovery to latest version
* Update ENR initialisation logic
* Remove debug statements
* Shifts timing units to slots
* Initial work
* Add initial fork versioning and EnrForkId
* Correct linking for EnrForkId
* Adds eth2 field to local ENR
* Initial work to eth2 field integration
* Integrate eth2 field into discovery
* temp commit
* Add a timer to adjust fork versions during a hard fork for the ENR
* Remove ping protocol
* Initial renaming of network services
* Correct rebasing relative to latest master
* Start updating types
* Adds HashMapDelay struct to utils
* Initial network restructure
* Network restructure. Adds new types for v0.2.0
* Removes build artefacts
* Shift validation to beacon chain
* Temporarily remove gossip validation
This is to be updated to match current optimisation efforts.
* Adds AggregateAndProof
* Begin rebuilding pubsub encoding/decoding
* Signature hacking
* Shift gossipsup decoding into eth2_libp2p
* Existing EF tests passing with fake_crypto
* Shifts block encoding/decoding into RPC
* Delete outdated API spec
* All release tests passing bar genesis state parsing
* Update and test YamlConfig
* Update to spec v0.10 compatible BLS
* Updates to BLS EF tests
* Add EF test for AggregateVerify
And delete unused hash2curve tests for uncompressed points
* Update EF tests to v0.10.1
* Use optional block root correctly in block proc
* Use genesis fork in deposit domain. All tests pass
* Fast aggregate verify test
* Update REST API docs
* Fix unused import
* Bump spec tags to v0.10.1
* Add `seconds_per_eth1_block` to chainspec
* Update to timestamp based eth1 voting scheme
* Return None from `get_votes_to_consider` if block cache is empty
* Handle overflows in `is_candidate_block`
* Revert to failing tests
* Fix eth1 data sets test
* Choose default vote according to spec
* Fix collect_valid_votes tests
* Fix `get_votes_to_consider` to choose all eligible blocks
* Uncomment winning_vote tests
* Add comments; remove unused code
* Reduce seconds_per_eth1_block for simulation
* Addressed review comments
* Add test for default vote case
* Fix logs
* Remove unused functions
* Meter default eth1 votes
* Fix comments
* Progress on attestation service
* Address review comments; remove unused dependency
* Initial work on removing libp2p lock
* Add LRU caches to store (rollup)
* Update attestation validation for DB changes (WIP)
* Initial version of should_forward_block
* Scaffold
* Progress on attestation validation
Also, consolidate prod+testing slot clocks so that they share much
of the same implementation and can both handle sub-slot time changes.
* Removes lock from libp2p service
* Completed network lock removal
* Finish(?) attestation processing
* Correct network termination future
* Add slot check to block check
* Correct fmt issues
* Remove Drop implementation for network service
* Add first attempt at attestation proc. re-write
* Add version 2 of attestation processing
* Minor fixes
* Add validator pubkey cache
* Make get_indexed_attestation take a committee
* Link signature processing into new attn verification
* First working version
* Ensure pubkey cache is updated
* Add more metrics, slight optimizations
* Clone committee cache during attestation processing
* Update shuffling cache during block processing
* Remove old commented-out code
* Fix shuffling cache insert bug
* Used indexed attestation in fork choice
* Restructure attn processing, add metrics
* Add more detailed metrics
* Tidy, fix failing tests
* Fix failing tests, tidy
* Address reviewers suggestions
* Disable/delete two outdated tests
* Modification of validator for subscriptions
* Add slot signing to validator client
* Further progress on validation subscription
* Adds necessary validator subscription functionality
* Add new Pubkeys struct to signature_sets
* Refactor with functional approach
* Update beacon chain
* Clean up validator <-> beacon node http types
* Add aggregator status to ValidatorDuty
* Impl Clone for manual slot clock
* Fix minor errors
* Further progress validator client subscription
* Initial subscription and aggregation handling
* Remove decompressed member from pubkey bytes
* Progress to modifying val client for attestation aggregation
* First draft of validator client upgrade for aggregate attestations
* Add hashmap for indices lookup
* Add state cache, remove store cache
* Only build the head committee cache
* Removes lock on a network channel
* Partially implement beacon node subscription http api
* Correct compilation issues
* Change `get_attesting_indices` to use Vec
* Fix failing test
* Partial implementation of timer
* Adds timer, removes exit_future, http api to op pool
* Partial multiple aggregate attestation handling
* Permits bulk messages accross gossipsub network channel
* Correct compile issues
* Improve gosispsub messaging and correct rest api helpers
* Added global gossipsub subscriptions
* Update validator subscriptions data structs
* Tidy
* Re-structure validator subscriptions
* Initial handling of subscriptions
* Re-structure network service
* Add pubkey cache persistence file
* Add more comments
* Integrate persistence file into builder
* Add pubkey cache tests
* Add HashSetDelay and introduce into attestation service
* Handles validator subscriptions
* Add data_dir to beacon chain builder
* Remove Option in pubkey cache persistence file
* Ensure consistency between datadir/data_dir
* Fix failing network test
* Peer subnet discovery gets queued for future subscriptions
* Reorganise attestation service functions
* Initial wiring of attestation service
* First draft of attestation service timing logic
* Correct minor typos
* Tidy
* Fix todos
* Improve tests
* Add PeerInfo to connected peers mapping
* Fix compile error
* Fix compile error from merge
* Split up block processing metrics
* Tidy
* Refactor get_pubkey_from_state
* Remove commented-out code
* Rename state_cache -> checkpoint_cache
* Rename Checkpoint -> Snapshot
* Tidy, add comments
* Tidy up find_head function
* Change some checkpoint -> snapshot
* Add tests
* Expose max_len
* Remove dead code
* Tidy
* Fix bug
* Add sync-speed metric
* Add first attempt at VerifiableBlock
* Start integrating into beacon chain
* Integrate VerifiableBlock
* Rename VerifableBlock -> PartialBlockVerification
* Add start of typed methods
* Add progress
* Add further progress
* Rename structs
* Add full block verification to block_processing.rs
* Further beacon chain integration
* Update checks for gossip
* Add todo
* Start adding segement verification
* Add passing chain segement test
* Initial integration with batch sync
* Minor changes
* Tidy, add more error checking
* Start adding chain_segment tests
* Finish invalid signature tests
* Include single and gossip verified blocks in tests
* Add gossip verification tests
* Start adding docs
* Finish adding comments to block_processing.rs
* Rename block_processing.rs -> block_verification
* Start removing old block processing code
* Fixes beacon_chain compilation
* Fix project-wide compile errors
* Remove old code
* Correct code to pass all tests
* Fix bug with beacon proposer index
* Fix shim for BlockProcessingError
* Only process one epoch at a time
* Fix loop in chain segment processing
* Correct tests from master merge
* Add caching for state.eth1_data_votes
* Add BeaconChain::validator_pubkey
* Revert "Add caching for state.eth1_data_votes"
This reverts commit cd73dcd6434fb8d8e6bf30c5356355598ea7b78e.
Co-authored-by: Grant Wuerker <gwuerker@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
Co-authored-by: pawan <pawandhananjay@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Unfinished progress
* Update more persistence code
* Start fixing tests
* Combine persist head and fork choice
* Persist head on reorg
* Gracefully handle op pool and eth1 cache missing
* Fix test failure
* Address Michael's comments
* Start updating types
* WIP
* Signature hacking
* Existing EF tests passing with fake_crypto
* Updates
* Delete outdated API spec
* The refactor continues
* It compiles
* WIP test fixes
* All release tests passing bar genesis state parsing
* Update and test YamlConfig
* Update to spec v0.10 compatible BLS
* Updates to BLS EF tests
* Add EF test for AggregateVerify
And delete unused hash2curve tests for uncompressed points
* Update EF tests to v0.10.1
* Use optional block root correctly in block proc
* Use genesis fork in deposit domain. All tests pass
* Cargo fmt
* Fast aggregate verify test
* Update REST API docs
* Cargo fmt
* Fix unused import
* Bump spec tags to v0.10.1
* Add `seconds_per_eth1_block` to chainspec
* Update to timestamp based eth1 voting scheme
* Return None from `get_votes_to_consider` if block cache is empty
* Handle overflows in `is_candidate_block`
* Revert to failing tests
* Fix eth1 data sets test
* Choose default vote according to spec
* Fix collect_valid_votes tests
* Fix `get_votes_to_consider` to choose all eligible blocks
* Uncomment winning_vote tests
* Add comments; remove unused code
* Reduce seconds_per_eth1_block for simulation
* Addressed review comments
* Add test for default vote case
* Fix logs
* Remove unused functions
* Meter default eth1 votes
* Fix comments
* Address review comments; remove unused dependency
* Add first attempt at attestation proc. re-write
* Add version 2 of attestation processing
* Minor fixes
* Add validator pubkey cache
* Make get_indexed_attestation take a committee
* Link signature processing into new attn verification
* First working version
* Ensure pubkey cache is updated
* Add more metrics, slight optimizations
* Clone committee cache during attestation processing
* Update shuffling cache during block processing
* Remove old commented-out code
* Fix shuffling cache insert bug
* Used indexed attestation in fork choice
* Restructure attn processing, add metrics
* Add more detailed metrics
* Tidy, fix failing tests
* Fix failing tests, tidy
* Disable/delete two outdated tests
* Tidy
* Add pubkey cache persistence file
* Add more comments
* Integrate persistence file into builder
* Add pubkey cache tests
* Add data_dir to beacon chain builder
* Remove Option in pubkey cache persistence file
* Ensure consistency between datadir/data_dir
* Fix failing network test
* Tidy
* Fix todos
* Add attestation processing tests
* Add another test
* Only run attestation tests in release
* Make attestation tests MainnetEthSpec
* Address Michael's comments
* Remove redundant check
* Fix warning
* Fix failing test
Co-authored-by: Michael Sproul <micsproul@gmail.com>
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
* Start adding interop genesis state to lcli
* Use more efficient method to generate genesis state
* Remove duplicate int_to_bytes32
* Add lcli command to change state genesis time
* Add option to allow VC to start with unsynced BN
* Set VC to do parallel key loading
* Don't default to dummy eth1 backend
* Add endpoint to dump operation pool
* Add metrics for op pool
* Remove state clone for slot notifier
* Add mem size approximation for tree hash cache
* Avoid cloning tree hash when getting head
* Avoid cloning tree hash when getting head
* Add working arena-based cached tree hash
* Add another benchmark
* Add pre-allocation for caches
* Make cache nullable
* Fix bugs in cache tree hash
* Add validator tree hash optimization
* Optimize hash_concat
* Make hash32_concat return fixed-len array
* Fix failing API tests
* Add new beacon state cache struct
* Add validator-specific cache
* Separate list and values arenas
* Add parallel validator registry hashing
* Remove MultiTreeHashCache
* Remove cached tree hash macro
* Fix failing tree hash test
* Address Michael's comments
* Add CachedTreeHash impl for ef tests
* Fix messy merge conflict
* Optimize attestation production
* Add first basic optimizations
* Fix SlotOutOfBounds error
* Resolved missed merge conflicts
* Fix another missed merge conflict
* Fix more merge conflict issues
* Add `StateSkipConfig`
* Fix test compile errors
* Add failing test
* Fix bug, make tests pass
* Add comment
* Delete unused function
* Replace deleted comment
* Start updating types
* WIP
* Signature hacking
* Existing EF tests passing with fake_crypto
* Updates
* Delete outdated API spec
* The refactor continues
* It compiles
* WIP test fixes
* All release tests passing bar genesis state parsing
* Update and test YamlConfig
* Update to spec v0.10 compatible BLS
* Updates to BLS EF tests
* Add EF test for AggregateVerify
And delete unused hash2curve tests for uncompressed points
* Update EF tests to v0.10.1
* Use optional block root correctly in block proc
* Use genesis fork in deposit domain. All tests pass
* Cargo fmt
* Fast aggregate verify test
* Update REST API docs
* Cargo fmt
* Fix unused import
* Bump spec tags to v0.10.1
* Add `seconds_per_eth1_block` to chainspec
* Update to timestamp based eth1 voting scheme
* Return None from `get_votes_to_consider` if block cache is empty
* Handle overflows in `is_candidate_block`
* Revert to failing tests
* Fix eth1 data sets test
* Choose default vote according to spec
* Fix collect_valid_votes tests
* Fix `get_votes_to_consider` to choose all eligible blocks
* Uncomment winning_vote tests
* Add comments; remove unused code
* Reduce seconds_per_eth1_block for simulation
* Addressed review comments
* Add test for default vote case
* Fix logs
* Remove unused functions
* Meter default eth1 votes
* Fix comments
* Address review comments; remove unused dependency
* Disable/delete two outdated tests
* Bump eth1 default vote warn to error
* Delete outdated eth1 test
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
* Add LRU caches to store
* Improvements to LRU caches
* Take state by value in `Store::put_state`
* Store blocks by value, configurable cache sizes
* Use a StateBatch to efficiently store skip states
* Fix store tests
* Add CloneConfig test, remove unused metrics
* Use Mutexes instead of RwLocks for LRU caches
