## Issue Addressed
#2847
## Proposed Changes
Add under a feature flag the required changes to subscribe to long lived subnets in a deterministic way
## Additional Info
There is an additional required change that is actually searching for peers using the prefix, but I find that it's best to make this change in the future
## Issue Addressed
Adding CLI tests for logging flags: log-color and disable-log-timestamp
Which issue # does this PR address?
#3588
## Proposed Changes
Add CLI tests for logging flags as described in #3588
Please list or describe the changes introduced by this PR.
Added logger_config to client::Config as suggested. Implemented Default for LoggerConfig based on what was being done elsewhere in the repo. Created 2 tests for each flag addressed.
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
## Issue Addressed
N/A
## Proposed Changes
With https://github.com/sigp/lighthouse/pull/3214 we made it such that you can either have 1 auth endpoint or multiple non auth endpoints. Now that we are post merge on all networks (testnets and mainnet), we cannot progress a chain without a dedicated auth execution layer connection so there is no point in having a non-auth eth1-endpoint for syncing deposit cache.
This code removes all fallback related code in the eth1 service. We still keep the single non-auth endpoint since it's useful for testing.
## Additional Info
This removes all eth1 fallback related metrics that were relevant for the monitoring service, so we might need to change the api upstream.
## Issue Addressed
NA
## Proposed Changes
Fixes an issue introduced in #3574 where I erroneously assumed that a `crossbeam_channel` multiple receiver queue was a *broadcast* queue. This is incorrect, each message will be received by *only one* receiver. The effect of this mistake is these logs:
```
Sep 20 06:56:17.001 INFO Synced slot: 4736079, block: 0xaa8a…180d, epoch: 148002, finalized_epoch: 148000, finalized_root: 0x2775…47f2, exec_hash: 0x2ca5…ffde (verified), peers: 6, service: slot_notifier
Sep 20 06:56:23.237 ERRO Unable to validate attestation error: CommitteeCacheWait(RecvError), peer_id: 16Uiu2HAm2Jnnj8868tb7hCta1rmkXUf5YjqUH1YPj35DCwNyeEzs, type: "aggregated", slot: Slot(4736047), beacon_block_root: 0x88d318534b1010e0ebd79aed60b6b6da1d70357d72b271c01adf55c2b46206c1
```
## Additional Info
NA
## Issue Addressed
NA
## Proposed Changes
I have observed scenarios on Goerli where Lighthouse was receiving attestations which reference the same, un-cached shuffling on multiple threads at the same time. Lighthouse was then loading the same state from database and determining the shuffling on multiple threads at the same time. This is unnecessary load on the disk and RAM.
This PR modifies the shuffling cache so that each entry can be either:
- A committee
- A promise for a committee (i.e., a `crossbeam_channel::Receiver`)
Now, in the scenario where we have thread A and thread B simultaneously requesting the same un-cached shuffling, we will have the following:
1. Thread A will take the write-lock on the shuffling cache, find that there's no cached committee and then create a "promise" (a `crossbeam_channel::Sender`) for a committee before dropping the write-lock.
1. Thread B will then be allowed to take the write-lock for the shuffling cache and find the promise created by thread A. It will block the current thread waiting for thread A to fulfill that promise.
1. Thread A will load the state from disk, obtain the shuffling, send it down the channel, insert the entry into the cache and then continue to verify the attestation.
1. Thread B will then receive the shuffling from the receiver, be un-blocked and then continue to verify the attestation.
In the case where thread A fails to generate the shuffling and drops the sender, the next time that specific shuffling is requested we will detect that the channel is disconnected and return a `None` entry for that shuffling. This will cause the shuffling to be re-calculated.
## Additional Info
NA
## Issue Addressed
Fix a `cargo-audit` failure. We don't use `axum` for anything besides tests, but `cargo-audit` is failing due to this vulnerability in `axum-core`: https://rustsec.org/advisories/RUSTSEC-2022-0055
## Issue Addressed
We were unable to update lighthouse by running `cargo update` because some of the `mev-build-rs` deps weren't pinned. But `mev-build-rs` is now pinned here and includes it's own pinned commits for `ssz-rs` and `etheruem-consensus`
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
We currently subscribe to attestation subnets as soon as the subscription arrives (one epoch in advance), this makes it so that subscriptions for future slots are scheduled instead of done immediately.
## Proposed Changes
- Schedule subscriptions to subnets for future slots.
- Finish removing hashmap_delay, in favor of [delay_map](https://github.com/AgeManning/delay_map). This was the only remaining service to do this.
- Subscriptions for past slots are rejected, before we would subscribe for one slot.
- Add a new test for subscriptions that are not consecutive.
## Additional Info
This is also an effort in making the code easier to understand
## Issue Addressed
NA
## Proposed Changes
This PR is motivated by a recent consensus failure in Geth where it returned `INVALID` for an `VALID` block. Without this PR, the only way to recover is by re-syncing Lighthouse. Whilst ELs "shouldn't have consensus failures", in reality it's something that we can expect from time to time due to the complex nature of Ethereum. Being able to recover easily will help the network recover and EL devs to troubleshoot.
The risk introduced with this PR is that genuinely INVALID payloads get a "second chance" at being imported. I believe the DoS risk here is negligible since LH needs to be restarted in order to re-process the payload. Furthermore, there's no reason to think that a well-performing EL will accept a truly invalid payload the second-time-around.
## Additional Info
This implementation has the following intricacies:
1. Instead of just resetting *invalid* payloads to optimistic, we'll also reset *valid* payloads. This is an artifact of our existing implementation.
1. We will only reset payload statuses when we detect an invalid payload present in `proto_array`
- This helps save us from forgetting that all our blocks are valid in the "best case scenario" where there are no invalid blocks.
1. If we fail to revert the payload statuses we'll log a `CRIT` and just continue with a `proto_array` that *does not* have reverted payload statuses.
- The code to revert statuses needs to deal with balances and proposer-boost, so it's a failure point. This is a defensive measure to avoid introducing new show-stopping bugs to LH.
## Proposed Changes
This PR has two aims: to speed up attestation packing in the op pool, and to fix bugs in the verification of attester slashings, proposer slashings and voluntary exits. The changes are bundled into a single database schema upgrade (v12).
Attestation packing is sped up by removing several inefficiencies:
- No more recalculation of `attesting_indices` during packing.
- No (unnecessary) examination of the `ParticipationFlags`: a bitfield suffices. See `RewardCache`.
- No re-checking of attestation validity during packing: the `AttestationMap` provides attestations which are "correct by construction" (I have checked this using Hydra).
- No SSZ re-serialization for the clunky `AttestationId` type (it can be removed in a future release).
So far the speed-up seems to be roughly 2-10x, from 500ms down to 50-100ms.
Verification of attester slashings, proposer slashings and voluntary exits is fixed by:
- Tracking the `ForkVersion`s that were used to verify each message inside the `SigVerifiedOp`. This allows us to quickly re-verify that they match the head state's opinion of what the `ForkVersion` should be at the epoch(s) relevant to the message.
- Storing the `SigVerifiedOp` on disk rather than the raw operation. This allows us to continue track the fork versions after a reboot.
This is mostly contained in this commit 52bb1840ae5c4356a8fc3a51e5df23ed65ed2c7f.
## Additional Info
The schema upgrade uses the justified state to re-verify attestations and compute `attesting_indices` for them. It will drop any attestations that fail to verify, by the logic that attestations are most valuable in the few slots after they're observed, and are probably stale and useless by the time a node restarts. Exits and proposer slashings and similarly re-verified to obtain `SigVerifiedOp`s.
This PR contains a runtime killswitch `--paranoid-block-proposal` which opts out of all the optimisations in favour of closely verifying every included message. Although I'm quite sure that the optimisations are correct this flag could be useful in the event of an unforeseen emergency.
Finally, you might notice that the `RewardCache` appears quite useless in its current form because it is only updated on the hot-path immediately before proposal. My hope is that in future we can shift calls to `RewardCache::update` into the background, e.g. while performing the state advance. It is also forward-looking to `tree-states` compatibility, where iterating and indexing `state.{previous,current}_epoch_participation` is expensive and needs to be minimised.
## Issue Addressed
#3032
## Proposed Changes
Pause sync when ee is offline. Changes include three main parts:
- Online/offline notification system
- Pause sync
- Resume sync
#### Online/offline notification system
- The engine state is now guarded behind a new struct `State` that ensures every change is correctly notified. Notifications are only sent if the state changes. The new `State` is behind a `RwLock` (as before) as the synchronization mechanism.
- The actual notification channel is a [tokio::sync::watch](https://docs.rs/tokio/latest/tokio/sync/watch/index.html) which ensures only the last value is in the receiver channel. This way we don't need to worry about message order etc.
- Sync waits for state changes concurrently with normal messages.
#### Pause Sync
Sync has four components, pausing is done differently in each:
- **Block lookups**: Disabled while in this state. We drop current requests and don't search for new blocks. Block lookups are infrequent and I don't think it's worth the extra logic of keeping these and delaying processing. If we later see that this is required, we can add it.
- **Parent lookups**: Disabled while in this state. We drop current requests and don't search for new parents. Parent lookups are even less frequent and I don't think it's worth the extra logic of keeping these and delaying processing. If we later see that this is required, we can add it.
- **Range**: Chains don't send batches for processing to the beacon processor. This is easily done by guarding the channel to the beacon processor and giving it access only if the ee is responsive. I find this the simplest and most powerful approach since we don't need to deal with new sync states and chain segments that are added while the ee is offline will follow the same logic without needing to synchronize a shared state among those. Another advantage of passive pause vs active pause is that we can still keep track of active advertised chain segments so that on resume we don't need to re-evaluate all our peers.
- **Backfill**: Not affected by ee states, we don't pause.
#### Resume Sync
- **Block lookups**: Enabled again.
- **Parent lookups**: Enabled again.
- **Range**: Active resume. Since the only real pause range does is not sending batches for processing, resume makes all chains that are holding read-for-processing batches send them.
- **Backfill**: Not affected by ee states, no need to resume.
## Additional Info
**QUESTION**: Originally I made this to notify and change on synced state, but @pawanjay176 on talks with @paulhauner concluded we only need to check online/offline states. The upcheck function mentions extra checks to have a very up to date sync status to aid the networking stack. However, the only need the networking stack would have is this one. I added a TODO to review if the extra check can be removed
Next gen of #3094
Will work best with #3439
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
## Issue Addressed
NA
## Proposed Changes
Bump versions to v3.0.0
## Additional Info
- ~~Blocked on #3439~~
- ~~Blocked on #3459~~
- ~~Blocked on #3463~~
- ~~Blocked on #3462~~
- ~~Requires further testing~~
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
Adds some metrics so we can track payload status responses from the EE. I think this will be useful for troubleshooting and alerting.
I also bumped the `BecaonChain::per_slot_task` to `debug` since it doesn't seem too noisy and would have helped us with some things we were debugging in the past.
## Additional Info
NA
## Proposed Changes
Enable multiple database backends for the slasher, either MDBX (default) or LMDB. The backend can be selected using `--slasher-backend={lmdb,mdbx}`.
## Additional Info
In order to abstract over the two library's different handling of database lifetimes I've used `Box::leak` to give the `Environment` type a `'static` lifetime. This was the only way I could think of using 100% safe code to construct a self-referential struct `SlasherDB`, where the `OpenDatabases` refers to the `Environment`. I think this is OK, as the `Environment` is expected to live for the life of the program, and both database engines leave the database in a consistent state after each write. The memory claimed for memory-mapping will be freed by the OS and appropriately flushed regardless of whether the `Environment` is actually dropped.
We are depending on two `sigp` forks of `libmdbx-rs` and `lmdb-rs`, to give us greater control over MDBX OS support and LMDB's version.
## Issue Addressed
Resolves#3388Resolves#2638
## Proposed Changes
- Return the `BellatrixPreset` on `/eth/v1/config/spec` by default.
- Allow users to opt out of this by providing `--http-spec-fork=altair` (unless there's a Bellatrix fork epoch set).
- Add the Altair constants from #2638 and make serving the constants non-optional (the `http-disable-legacy-spec` flag is deprecated).
- Modify the VC to only read the `Config` and not to log extra fields. This prevents it from having to muck around parsing the `ConfigAndPreset` fields it doesn't need.
## Additional Info
This change is backwards-compatible for the VC and the BN, but is marked as a breaking change for the removal of `--http-disable-legacy-spec`.
I tried making `Config` a `superstruct` too, but getting the automatic decoding to work was a huge pain and was going to require a lot of hacks, so I gave up in favour of keeping the default-based approach we have now.
## Issue Addressed
NA
## Proposed Changes
Modifies `lcli skip-slots` and `lcli transition-blocks` allow them to source blocks/states from a beaconAPI and also gives them some more features to assist with benchmarking.
## Additional Info
Breaks the current `lcli skip-slots` and `lcli transition-blocks` APIs by changing some flag names. It should be simple enough to figure out the changes via `--help`.
Currently blocked on #3263.
## Issue Addressed
https://github.com/sigp/lighthouse/issues/3091
Extends https://github.com/sigp/lighthouse/pull/3062, adding pre-bellatrix block support on blinded endpoints and allowing the normal proposal flow (local payload construction) on blinded endpoints. This resulted in better fallback logic because the VC will not have to switch endpoints on failure in the BN <> Builder API, the BN can just fallback immediately and without repeating block processing that it shouldn't need to. We can also keep VC fallback from the VC<>BN API's blinded endpoint to full endpoint.
## Proposed Changes
- Pre-bellatrix blocks on blinded endpoints
- Add a new `PayloadCache` to the execution layer
- Better fallback-from-builder logic
## Todos
- [x] Remove VC transition logic
- [x] Add logic to only enable builder flow after Merge transition finalization
- [x] Tests
- [x] Fix metrics
- [x] Rustdocs
Co-authored-by: Mac L <mjladson@pm.me>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/3241
Closes https://github.com/sigp/lighthouse/issues/3242
## Proposed Changes
* [x] Implement logic to remove equivocating validators from fork choice per https://github.com/ethereum/consensus-specs/pull/2845
* [x] Update tests to v1.2.0-rc.1. The new test which exercises `equivocating_indices` is passing.
* [x] Pull in some SSZ abstractions from the `tree-states` branch that make implementing Vec-compatible encoding for types like `BTreeSet` and `BTreeMap`.
* [x] Implement schema upgrades and downgrades for the database (new schema version is V11).
* [x] Apply attester slashings from blocks to fork choice
## Additional Info
* This PR doesn't need the `BTreeMap` impl, but `tree-states` does, and I don't think there's any harm in keeping it. But I could also be convinced to drop it.
Blocked on #3322.
## Issue Addressed
Add a flag that optionally enables unrealized vote tracking. Would like to test out on testnets and benchmark differences in methods of vote tracking. This PR includes a DB schema upgrade to enable to new vote tracking style.
Co-authored-by: realbigsean <sean@sigmaprime.io>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Co-authored-by: sean <seananderson33@gmail.com>
Co-authored-by: Mac L <mjladson@pm.me>
## Issue Addressed
#3031
## Proposed Changes
Updates the following API endpoints to conform with https://github.com/ethereum/beacon-APIs/pull/190 and https://github.com/ethereum/beacon-APIs/pull/196
- [x] `beacon/states/{state_id}/root`
- [x] `beacon/states/{state_id}/fork`
- [x] `beacon/states/{state_id}/finality_checkpoints`
- [x] `beacon/states/{state_id}/validators`
- [x] `beacon/states/{state_id}/validators/{validator_id}`
- [x] `beacon/states/{state_id}/validator_balances`
- [x] `beacon/states/{state_id}/committees`
- [x] `beacon/states/{state_id}/sync_committees`
- [x] `beacon/headers`
- [x] `beacon/headers/{block_id}`
- [x] `beacon/blocks/{block_id}`
- [x] `beacon/blocks/{block_id}/root`
- [x] `beacon/blocks/{block_id}/attestations`
- [x] `debug/beacon/states/{state_id}`
- [x] `debug/beacon/heads`
- [x] `validator/duties/attester/{epoch}`
- [x] `validator/duties/proposer/{epoch}`
- [x] `validator/duties/sync/{epoch}`
Updates the following Server-Sent Events:
- [x] `events?topics=head`
- [x] `events?topics=block`
- [x] `events?topics=finalized_checkpoint`
- [x] `events?topics=chain_reorg`
## Backwards Incompatible
There is a very minor breaking change with the way the API now handles requests to `beacon/blocks/{block_id}/root` and `beacon/states/{state_id}/root` when `block_id` or `state_id` is the `Root` variant of `BlockId` and `StateId` respectively.
Previously a request to a non-existent root would simply echo the root back to the requester:
```
curl "http://localhost:5052/eth/v1/beacon/states/0xaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/root"
{"data":{"root":"0xaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"}}
```
Now it will return a `404`:
```
curl "http://localhost:5052/eth/v1/beacon/blocks/0xaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/root"
{"code":404,"message":"NOT_FOUND: beacon block with root 0xaaaa…aaaa","stacktraces":[]}
```
In addition to this is the block root `0x0000000000000000000000000000000000000000000000000000000000000000` previously would return the genesis block. It will now return a `404`:
```
curl "http://localhost:5052/eth/v1/beacon/blocks/0x0000000000000000000000000000000000000000000000000000000000000000"
{"code":404,"message":"NOT_FOUND: beacon block with root 0x0000…0000","stacktraces":[]}
```
## Additional Info
- `execution_optimistic` is always set, and will return `false` pre-Bellatrix. I am also open to the idea of doing something like `#[serde(skip_serializing_if = "Option::is_none")]`.
- The value of `execution_optimistic` is set to `false` where possible. Any computation that is reliant on the `head` will simply use the `ExecutionStatus` of the head (unless the head block is pre-Bellatrix).
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/3189.
## Proposed Changes
- Always supply the justified block hash as the `safe_block_hash` when calling `forkchoiceUpdated` on the execution engine.
- Refactor the `get_payload` routine to use the new `ForkchoiceUpdateParameters` struct rather than just the `finalized_block_hash`. I think this is a nice simplification and that the old way of computing the `finalized_block_hash` was unnecessary, but if anyone sees reason to keep that approach LMK.
## Issue Addressed
N/A
## Proposed Changes
Make simulator merge compatible. Adds a `--post_merge` flag to the eth1 simulator that enables a ttd and simulates the merge transition. Uses the `MockServer` in the execution layer test utils to simulate a dummy execution node.
Adds the merge transition simulation to CI.
## Issue Addressed
Resolves#3159
## Proposed Changes
Sends transactions to the EE before requesting for a payload in the `execution_integration_tests`. Made some changes to the integration tests in order to be able to sign and publish transactions to the EE:
1. `genesis.json` for both geth and nethermind was modified to include pre-funded accounts that we know private keys for
2. Using the unauthenticated port again in order to make `eth_sendTransaction` and calls from the `personal` namespace to import keys
Also added a `fcu` call with `PayloadAttributes` before calling `getPayload` in order to give EEs sufficient time to pack transactions into the payload.
## Overview
This rather extensive PR achieves two primary goals:
1. Uses the finalized/justified checkpoints of fork choice (FC), rather than that of the head state.
2. Refactors fork choice, block production and block processing to `async` functions.
Additionally, it achieves:
- Concurrent forkchoice updates to the EL and cache pruning after a new head is selected.
- Concurrent "block packing" (attestations, etc) and execution payload retrieval during block production.
- Concurrent per-block-processing and execution payload verification during block processing.
- The `Arc`-ification of `SignedBeaconBlock` during block processing (it's never mutated, so why not?):
- I had to do this to deal with sending blocks into spawned tasks.
- Previously we were cloning the beacon block at least 2 times during each block processing, these clones are either removed or turned into cheaper `Arc` clones.
- We were also `Box`-ing and un-`Box`-ing beacon blocks as they moved throughout the networking crate. This is not a big deal, but it's nice to avoid shifting things between the stack and heap.
- Avoids cloning *all the blocks* in *every chain segment* during sync.
- It also has the potential to clean up our code where we need to pass an *owned* block around so we can send it back in the case of an error (I didn't do much of this, my PR is already big enough 😅)
- The `BeaconChain::HeadSafetyStatus` struct was removed. It was an old relic from prior merge specs.
For motivation for this change, see https://github.com/sigp/lighthouse/pull/3244#issuecomment-1160963273
## Changes to `canonical_head` and `fork_choice`
Previously, the `BeaconChain` had two separate fields:
```
canonical_head: RwLock<Snapshot>,
fork_choice: RwLock<BeaconForkChoice>
```
Now, we have grouped these values under a single struct:
```
canonical_head: CanonicalHead {
cached_head: RwLock<Arc<Snapshot>>,
fork_choice: RwLock<BeaconForkChoice>
}
```
Apart from ergonomics, the only *actual* change here is wrapping the canonical head snapshot in an `Arc`. This means that we no longer need to hold the `cached_head` (`canonical_head`, in old terms) lock when we want to pull some values from it. This was done to avoid deadlock risks by preventing functions from acquiring (and holding) the `cached_head` and `fork_choice` locks simultaneously.
## Breaking Changes
### The `state` (root) field in the `finalized_checkpoint` SSE event
Consider the scenario where epoch `n` is just finalized, but `start_slot(n)` is skipped. There are two state roots we might in the `finalized_checkpoint` SSE event:
1. The state root of the finalized block, which is `get_block(finalized_checkpoint.root).state_root`.
4. The state root at slot of `start_slot(n)`, which would be the state from (1), but "skipped forward" through any skip slots.
Previously, Lighthouse would choose (2). However, we can see that when [Teku generates that event](de2b2801c8/data/beaconrestapi/src/main/java/tech/pegasys/teku/beaconrestapi/handlers/v1/events/EventSubscriptionManager.java (L171-L182)) it uses [`getStateRootFromBlockRoot`](de2b2801c8/data/provider/src/main/java/tech/pegasys/teku/api/ChainDataProvider.java (L336-L341)) which uses (1).
I have switched Lighthouse from (2) to (1). I think it's a somewhat arbitrary choice between the two, where (1) is easier to compute and is consistent with Teku.
## Notes for Reviewers
I've renamed `BeaconChain::fork_choice` to `BeaconChain::recompute_head`. Doing this helped ensure I broke all previous uses of fork choice and I also find it more descriptive. It describes an action and can't be confused with trying to get a reference to the `ForkChoice` struct.
I've changed the ordering of SSE events when a block is received. It used to be `[block, finalized, head]` and now it's `[block, head, finalized]`. It was easier this way and I don't think we were making any promises about SSE event ordering so it's not "breaking".
I've made it so fork choice will run when it's first constructed. I did this because I wanted to have a cached version of the last call to `get_head`. Ensuring `get_head` has been run *at least once* means that the cached values doesn't need to wrapped in an `Option`. This was fairly simple, it just involved passing a `slot` to the constructor so it knows *when* it's being run. When loading a fork choice from the store and a slot clock isn't handy I've just used the `slot` that was saved in the `fork_choice_store`. That seems like it would be a faithful representation of the slot when we saved it.
I added the `genesis_time: u64` to the `BeaconChain`. It's small, constant and nice to have around.
Since we're using FC for the fin/just checkpoints, we no longer get the `0x00..00` roots at genesis. You can see I had to remove a work-around in `ef-tests` here: b56be3bc2. I can't find any reason why this would be an issue, if anything I think it'll be better since the genesis-alias has caught us out a few times (0x00..00 isn't actually a real root). Edit: I did find a case where the `network` expected the 0x00..00 alias and patched it here: 3f26ac3e2.
You'll notice a lot of changes in tests. Generally, tests should be functionally equivalent. Here are the things creating the most diff-noise in tests:
- Changing tests to be `tokio::async` tests.
- Adding `.await` to fork choice, block processing and block production functions.
- Refactor of the `canonical_head` "API" provided by the `BeaconChain`. E.g., `chain.canonical_head.cached_head()` instead of `chain.canonical_head.read()`.
- Wrapping `SignedBeaconBlock` in an `Arc`.
- In the `beacon_chain/tests/block_verification`, we can't use the `lazy_static` `CHAIN_SEGMENT` variable anymore since it's generated with an async function. We just generate it in each test, not so efficient but hopefully insignificant.
I had to disable `rayon` concurrent tests in the `fork_choice` tests. This is because the use of `rayon` and `block_on` was causing a panic.
Co-authored-by: Mac L <mjladson@pm.me>
## Issue Addressed
This PR is a subset of the changes in #3134. Unstable will still not function correctly with the new builder spec once this is merged, #3134 should be used on testnets
## Proposed Changes
- Removes redundancy in "builders" (servers implementing the builder spec)
- Renames `payload-builder` flag to `builder`
- Moves from old builder RPC API to new HTTP API, but does not implement the validator registration API (implemented in https://github.com/sigp/lighthouse/pull/3194)
Co-authored-by: sean <seananderson33@gmail.com>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
Lays the groundwork for builder API changes by implementing the beacon-API's new `register_validator` endpoint
## Proposed Changes
- Add a routine in the VC that runs on startup (re-try until success), once per epoch or whenever `suggested_fee_recipient` is updated, signing `ValidatorRegistrationData` and sending it to the BN.
- TODO: `gas_limit` config options https://github.com/ethereum/builder-specs/issues/17
- BN only sends VC registration data to builders on demand, but VC registration data *does update* the BN's prepare proposer cache and send an updated fcU to a local EE. This is necessary for fee recipient consistency between the blinded and full block flow in the event of fallback. Having the BN only send registration data to builders on demand gives feedback directly to the VC about relay status. Also, since the BN has no ability to sign these messages anyways (so couldn't refresh them if it wanted), and validator registration is independent of the BN head, I think this approach makes sense.
- Adds upcoming consensus spec changes for this PR https://github.com/ethereum/consensus-specs/pull/2884
- I initially applied the bit mask based on a configured application domain.. but I ended up just hard coding it here instead because that's how it's spec'd in the builder repo.
- Should application mask appear in the api?
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
Resolves#3069
## Proposed Changes
Unify the `eth1-endpoints` and `execution-endpoints` flags in a backwards compatible way as described in https://github.com/sigp/lighthouse/issues/3069#issuecomment-1134219221
Users have 2 options:
1. Use multiple non auth execution endpoints for deposit processing pre-merge
2. Use a single jwt authenticated execution endpoint for both execution layer and deposit processing post merge
Related https://github.com/sigp/lighthouse/issues/3118
To enable jwt authenticated deposit processing, this PR removes the calls to `net_version` as the `net` namespace is not exposed in the auth server in execution clients.
Moving away from using `networkId` is a good step in my opinion as it doesn't provide us with any added guarantees over `chainId`. See https://github.com/ethereum/consensus-specs/issues/2163 and https://github.com/sigp/lighthouse/issues/2115
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Proposed Changes
Add a new HTTP endpoint `POST /lighthouse/analysis/block_rewards` which takes a vec of `BeaconBlock`s as input and outputs the `BlockReward`s for them.
Augment the `BlockReward` struct with the attestation data for attestations in the block, which simplifies access to this information from blockprint. Using attestation data I've been able to make blockprint up to 95% accurate across Prysm/Lighthouse/Teku/Nimbus. I hope to go even higher using a bunch of synthetic blocks produced for Prysm/Nimbus/Lodestar, which are underrepresented in the current training data.
## Issue Addressed
Following up from https://github.com/sigp/lighthouse/pull/3223#issuecomment-1158718102, it has been observed that the validator client uses vastly more memory in some compilation configurations than others. Compiling with Cross and then putting the binary into an Ubuntu 22.04 image seems to use 3x more memory than compiling with Cargo directly on Debian bullseye.
## Proposed Changes
Enable malloc metrics for the validator client. This will hopefully allow us to see the difference between the two compilation configs and compare heap fragmentation. This PR doesn't enable malloc tuning for the VC because it was found to perform significantly worse. The `--disable-malloc-tuning` flag is repurposed to just disable the metrics.
## Issue Addressed
na
## Proposed Changes
Updates libp2p to https://github.com/libp2p/rust-libp2p/pull/2662
## Additional Info
From comments on the relevant PRs listed, we should pay attention at peer management consistency, but I don't think anything weird will happen.
This is running in prater tok and sin
## Issue Addressed
NA
## Proposed Changes
Please list or describe the changes introduced by this PR.
## Additional Info
- Pending testing on our infra. **Please do not merge**
## Issue Addressed
This fixes the low-hanging Clippy lints introduced in Rust 1.61 (due any hour now). It _ignores_ one lint, because fixing it requires a structural refactor of the validator client that needs to be done delicately. I've started on that refactor and will create another PR that can be reviewed in more depth in the coming days. I think we should merge this PR in the meantime to unblock CI.
## Issue Addressed
Upcoming spec change https://github.com/ethereum/consensus-specs/pull/2878
## Proposed Changes
1. Run fork choice at the start of every slot, and wait for this run to complete before proposing a block.
2. As an optimisation, also run fork choice 3/4 of the way through the slot (at 9s), _dequeueing attestations for the next slot_.
3. Remove the fork choice run from the state advance timer that occurred before advancing the state.
## Additional Info
### Block Proposal Accuracy
This change makes us more likely to propose on top of the correct head in the presence of re-orgs with proposer boost in play. The main scenario that this change is designed to address is described in the linked spec issue.
### Attestation Accuracy
This change _also_ makes us more likely to attest to the correct head. Currently in the case of a skipped slot at `slot` we only run fork choice 9s into `slot - 1`. This means the attestations from `slot - 1` aren't taken into consideration, and any boost applied to the block from `slot - 1` is not removed (it should be). In the language of the linked spec issue, this means we are liable to attest to C, even when the majority voting weight has already caused a re-org to B.
### Why remove the call before the state advance?
If we've run fork choice at the start of the slot then it has already dequeued all the attestations from the previous slot, which are the only ones eligible to influence the head in the current slot. Running fork choice again is unnecessary (unless we run it for the next slot and try to pre-empt a re-org, but I don't currently think this is a great idea).
### Performance
Based on Prater testing this adds about 5-25ms of runtime to block proposal times, which are 500-1000ms on average (and spike to 5s+ sometimes due to state handling issues 😢 ). I believe this is a small enough penalty to enable it by default, with the option to disable it via the new flag `--fork-choice-before-proposal-timeout 0`. Upcoming work on block packing and state representation will also reduce block production times in general, while removing the spikes.
### Implementation
Fork choice gets invoked at the start of the slot via the `per_slot_task` function called from the slot timer. It then uses a condition variable to signal to block production that fork choice has been updated. This is a bit funky, but it seems to work. One downside of the timer-based approach is that it doesn't happen automatically in most of the tests. The test added by this PR has to trigger the run manually.
## Issue Addressed
Which issue # does this PR address?
#3114
## Proposed Changes
1. introduce `mime` package
2. Parse `Accept` field in the header with `mime`
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
# Description
Since the `TaskExecutor` currently requires a `Weak<Runtime>`, it's impossible to use it in an async test where the `Runtime` is created outside our scope. Whilst we *could* create a new `Runtime` instance inside the async test, dropping that `Runtime` would cause a panic (you can't drop a `Runtime` in an async context).
To address this issue, this PR creates the `enum Handle`, which supports either:
- A `Weak<Runtime>` (for use in our production code)
- A `Handle` to a runtime (for use in testing)
In theory, there should be no change to the behaviour of our production code (beyond some slightly different descriptions in HTTP 500 errors), or even our tests. If there is no change, you might ask *"why bother?"*. There are two PRs (#3070 and #3175) that are waiting on these fixes to introduce some new tests. Since we've added the EL to the `BeaconChain` (for the merge), we are now doing more async stuff in tests.
I've also added a `RuntimeExecutor` to the `BeaconChainTestHarness`. Whilst that's not immediately useful, it will become useful in the near future with all the new async testing.
## Proposed Changes
Reduce post-merge disk usage by not storing finalized execution payloads in Lighthouse's database.
⚠️ **This is achieved in a backwards-incompatible way for networks that have already merged** ⚠️. Kiln users and shadow fork enjoyers will be unable to downgrade after running the code from this PR. The upgrade migration may take several minutes to run, and can't be aborted after it begins.
The main changes are:
- New column in the database called `ExecPayload`, keyed by beacon block root.
- The `BeaconBlock` column now stores blinded blocks only.
- Lots of places that previously used full blocks now use blinded blocks, e.g. analytics APIs, block replay in the DB, etc.
- On finalization:
- `prune_abanonded_forks` deletes non-canonical payloads whilst deleting non-canonical blocks.
- `migrate_db` deletes finalized canonical payloads whilst deleting finalized states.
- Conversions between blinded and full blocks are implemented in a compositional way, duplicating some work from Sean's PR #3134.
- The execution layer has a new `get_payload_by_block_hash` method that reconstructs a payload using the EE's `eth_getBlockByHash` call.
- I've tested manually that it works on Kiln, using Geth and Nethermind.
- This isn't necessarily the most efficient method, and new engine APIs are being discussed to improve this: https://github.com/ethereum/execution-apis/pull/146.
- We're depending on the `ethers` master branch, due to lots of recent changes. We're also using a workaround for https://github.com/gakonst/ethers-rs/issues/1134.
- Payload reconstruction is used in the HTTP API via `BeaconChain::get_block`, which is now `async`. Due to the `async` fn, the `blocking_json` wrapper has been removed.
- Payload reconstruction is used in network RPC to serve blocks-by-{root,range} responses. Here the `async` adjustment is messier, although I think I've managed to come up with a reasonable compromise: the handlers take the `SendOnDrop` by value so that they can drop it on _task completion_ (after the `fn` returns). Still, this is introducing disk reads onto core executor threads, which may have a negative performance impact (thoughts appreciated).
## Additional Info
- [x] For performance it would be great to remove the cloning of full blocks when converting them to blinded blocks to write to disk. I'm going to experiment with a `put_block` API that takes the block by value, breaks it into a blinded block and a payload, stores the blinded block, and then re-assembles the full block for the caller.
- [x] We should measure the latency of blocks-by-root and blocks-by-range responses.
- [x] We should add integration tests that stress the payload reconstruction (basic tests done, issue for more extensive tests: https://github.com/sigp/lighthouse/issues/3159)
- [x] We should (manually) test the schema v9 migration from several prior versions, particularly as blocks have changed on disk and some migrations rely on being able to load blocks.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
Addresses sync stalls on v2.2.0 (i.e. https://github.com/sigp/lighthouse/issues/3147).
## Additional Info
I've avoided doing a full `cargo update` because I noticed there's a new patch version of libp2p and thought it could do with some more testing.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Proposed Changes
Cut release v2.2.0 including proposer boost.
## Additional Info
I also updated the clippy lints for the imminent release of Rust 1.60, although LH v2.2.0 will continue to compile using Rust 1.58 (our MSRV).
## Proposed Changes
I did some gardening 🌳 in our dependency tree:
- Remove duplicate versions of `warp` (git vs patch)
- Remove duplicate versions of lots of small deps: `cpufeatures`, `ethabi`, `ethereum-types`, `bitvec`, `nix`, `libsecp256k1`.
- Update MDBX (should resolve#3028). I tested and Lighthouse compiles on Windows 11 now.
- Restore `psutil` back to upstream
- Make some progress updating everything to rand 0.8. There are a few crates stuck on 0.7.
Hopefully this puts us on a better footing for future `cargo audit` issues, and improves compile times slightly.
## Additional Info
Some crates are held back by issues with `zeroize`. libp2p-noise depends on [`chacha20poly1305`](https://crates.io/crates/chacha20poly1305) which depends on zeroize < v1.5, and we can only have one version of zeroize because it's post 1.0 (see https://github.com/rust-lang/cargo/issues/6584). The latest version of `zeroize` is v1.5.4, which is used by the new versions of many other crates (e.g. `num-bigint-dig`). Once a new version of chacha20poly1305 is released we can update libp2p-noise and upgrade everything to the latest `zeroize` version.
I've also opened a PR to `blst` related to zeroize: https://github.com/supranational/blst/pull/111
## Proposed Changes
Add a `lighthouse db` command with three initial subcommands:
- `lighthouse db version`: print the database schema version.
- `lighthouse db migrate --to N`: manually upgrade (or downgrade!) the database to a different version.
- `lighthouse db inspect --column C`: log the key and size in bytes of every value in a given `DBColumn`.
This PR lays the groundwork for other changes, namely:
- Mark's fast-deposit sync (https://github.com/sigp/lighthouse/pull/2915), for which I think we should implement a database downgrade (from v9 to v8).
- My `tree-states` work, which already implements a downgrade (v10 to v8).
- Standalone purge commands like `lighthouse db purge-dht` per https://github.com/sigp/lighthouse/issues/2824.
## Additional Info
I updated the `strum` crate to 0.24.0, which necessitated some changes in the network code to remove calls to deprecated methods.
Thanks to @winksaville for the motivation, and implementation work that I used as a source of inspiration (https://github.com/sigp/lighthouse/pull/2685).
## Issue Addressed
MEV boost compatibility
## Proposed Changes
See #2987
## Additional Info
This is blocked on the stabilization of a couple specs, [here](https://github.com/ethereum/beacon-APIs/pull/194) and [here](https://github.com/flashbots/mev-boost/pull/20).
Additional TODO's and outstanding questions
- [ ] MEV boost JWT Auth
- [ ] Will `builder_proposeBlindedBlock` return the revealed payload for the BN to propogate
- [ ] Should we remove `private-tx-proposals` flag and communicate BN <> VC with blinded blocks by default once these endpoints enter the beacon-API's repo? This simplifies merge transition logic.
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: realbigsean <sean@sigmaprime.io>
## Issue Addressed
Fix the `cargo-audit` failure for the recent openssl bug involving parsing of untrusted certificates (CVE-2022-0778).
## Additional Info
Lighthouse loads remote certificates in the following cases:
* When connecting to an eth1 node (`--eth1-endpoints`).
* When connecting to a beacon node from the VC (`--beacon-nodes`).
* When connecting to a beacon node for checkpoint sync (`--checkpoint-sync-url`).
In all of these cases we are already placing a lot of trust in the server at the other end, however due to the scope for MITM attacks we are still potentially vulnerable. E.g. an ISP could inject an invalid certificate for the remote host which would cause Lighthouse to hang indefinitely.
## Issue Addressed
NA
## Proposed Changes
- Bump version to `v2.1.4`
- Run `cargo update`
## Additional Info
I think this release should be published around the 15th of March.
Presently `blocked` for testing on our infrastructure.
## Issue Addressed
Resolves#2936
## Proposed Changes
Adds functionality for calling [`validator/prepare_beacon_proposer`](https://ethereum.github.io/beacon-APIs/?urls.primaryName=dev#/Validator/prepareBeaconProposer) in advance.
There is a `BeaconChain::prepare_beacon_proposer` method which, which called, computes the proposer for the next slot. If that proposer has been registered via the `validator/prepare_beacon_proposer` API method, then the `beacon_chain.execution_layer` will be provided the `PayloadAttributes` for us in all future forkchoiceUpdated calls. An artificial forkchoiceUpdated call will be created 4s before each slot, when the head updates and when a validator updates their information.
Additionally, I added strict ordering for calls from the `BeaconChain` to the `ExecutionLayer`. I'm not certain the `ExecutionLayer` will always maintain this ordering, but it's a good start to have consistency from the `BeaconChain`. There are some deadlock opportunities introduced, they are documented in the code.
## Additional Info
- ~~Blocked on #2837~~
Co-authored-by: realbigsean <seananderson33@GMAIL.com>
## Issue Addressed
Resolves#3015
## Proposed Changes
Add JWT token based authentication to engine api requests. The jwt secret key is read from the provided file and is used to sign tokens that are used for authenticated communication with the EL node.
- [x] Interop with geth (synced `merge-devnet-4` with the `merge-kiln-v2` branch on geth)
- [x] Interop with other EL clients (nethermind on `merge-devnet-4`)
- [x] ~Implement `zeroize` for jwt secrets~
- [x] Add auth server tests with `mock_execution_layer`
- [x] Get auth working with the `execution_engine_integration` tests
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Description
This PR adds a single, trivial commit (f5d2b27d78349d5a675a2615eba42cc9ae708094) atop #2986 to resolve a tests compile error. The original author (@ethDreamer) is AFK so I'm getting this one merged ☺️
Please see #2986 for more information about the other, significant changes in this PR.
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
Co-authored-by: ethDreamer <37123614+ethDreamer@users.noreply.github.com>
## Issue Addressed
N/A
## Proposed Changes
Add a HTTP API which can be used to compute the block packing data for all blocks over a discrete range of epochs.
## Usage
### Request
```
curl "http:localhost:5052/lighthouse/analysis/block_packing_efficiency?start_epoch=57730&end_epoch=57732"
```
### Response
```
[
{
"slot": "1847360",
"block_hash": "0xa7dc230659802df2f99ea3798faede2e75942bb5735d56e6bfdc2df335dcd61f",
"proposer_info": {
"validator_index": 1686,
"graffiti": ""
},
"available_attestations": 7096,
"included_attestations": 6459,
"prior_skip_slots": 0
},
...
]
```
## Additional Info
This is notably different to the existing lcli code:
- Uses `BlockReplayer` #2863 and as such runs significantly faster than the previous method.
- Corrects the off-by-one #2878
- Removes the `offline` validators component. This was only a "best guess" and simply was used as a way to determine an estimate of the "true" packing efficiency and was generally not helpful in terms of direct comparisons between different packing methods. As such it has been removed from the API and any future estimates of "offline" validators would be better suited in a separate/more targeted API or as part of 'beacon watch': #2873
- Includes `prior_skip_slots`.
## Issue Addressed
Closes#2880
## Proposed Changes
Support requests to the next epoch in proposer_duties api.
## Additional Info
Implemented with skipping proposer cache for this case because the cache for the future epoch will be missed every new slot as dependent_root is changed and we don't want to "wash it out" by saving additional values.
## Issue Addressed
Alternative to #2935
## Proposed Changes
Replace the `Vec<u8>` inside `Bitfield` with a `SmallVec<[u8; 32>`. This eliminates heap allocations for attestation bitfields until we reach 500K validators, at which point we can consider increasing `SMALLVEC_LEN` to 40 or 48.
While running Lighthouse under `heaptrack` I found that SSZ encoding and decoding of bitfields corresponded to 22% of all allocations by count. I've confirmed that with this change applied those allocations disappear entirely.
## Additional Info
We can win another 8 bytes of space by using `smallvec`'s [`union` feature](https://docs.rs/smallvec/1.8.0/smallvec/#union), although I might leave that for a future PR because I don't know how experimental that feature is and whether it uses some spicy `unsafe` blocks.
## Issue Addressed
NA
## Proposed Changes
This PR extends #3018 to address my review comments there and add automated integration tests with Geth (and other implementations, in the future).
I've also de-duplicated the "unused port" logic by creating an `common/unused_port` crate.
## Additional Info
I'm not sure if we want to merge this PR, or update #3018 and merge that. I don't mind, I'm primarily opening this PR to make sure CI works.
Co-authored-by: Mark Mackey <mark@sigmaprime.io>
## Issue Addressed
Lighthouse gossiping late messages
## Proposed Changes
Point LH to our fork using tokio interval, which 1) works as expected 2) is more performant than the previous version that actually worked as expected
Upgrade libp2p
## Additional Info
https://github.com/libp2p/rust-libp2p/issues/2497
## Issue Addressed
Implements the standard key manager API from https://ethereum.github.io/keymanager-APIs/, formerly https://github.com/ethereum/beacon-APIs/pull/151
Related to https://github.com/sigp/lighthouse/issues/2557
## Proposed Changes
- [x] Add all of the new endpoints from the standard API: GET, POST and DELETE.
- [x] Add a `validators.enabled` column to the slashing protection database to support atomic disable + export.
- [x] Add tests for all the common sequential accesses of the API
- [x] Add tests for interactions with remote signer validators
- [x] Add end-to-end tests for migration of validators from one VC to another
- [x] Implement the authentication scheme from the standard (token bearer auth)
## Additional Info
The `enabled` column in the validators SQL database is necessary to prevent a race condition when exporting slashing protection data. Without the slashing protection database having a way of knowing that a key has been disabled, a concurrent request to sign a message could insert a new record into the database. The `delete_concurrent_with_signing` test exercises this code path, and was indeed failing before the `enabled` column was added.
The validator client authentication has been modified from basic auth to bearer auth, with basic auth preserved for backwards compatibility.
## Issue Addressed
NA
## Proposed Changes
- Bump Lighthouse version to v2.1.1
- Update `thread_local` from v1.1.3 to v1.1.4 to address https://rustsec.org/advisories/RUSTSEC-2022-0006
## Additional Info
- ~~Blocked on #2950~~
- ~~Blocked on #2952~~
## Proposed Changes
Remove the check for exact equality on the beacon node spec when polling `/config/spec` from the VC. This check was always overzealous, and mostly served to check that the BN was configured for upcoming forks. I've replaced it by explicit checks of the `altair_fork_epoch` and `bellatrix_fork_epoch` instead.
## Additional Info
We should come back to this and clean it up so that we can retain compatibility while removing the field `default`s we installed.
## Issue Addressed
#2900
## Proposed Changes
Change type of extra_fields in ConfigAndPreset so it can contain non string values (inside serde_json::Value)
## Issues Addressed
Closes#2739Closes#2812
## Proposed Changes
Support the deserialization of query strings containing duplicate keys into their corresponding types.
As `warp` does not support this feature natively (as discussed in #2739), it relies on the external library [`serde_array_query`](https://github.com/sigp/serde_array_query) (written by @michaelsproul)
This is backwards compatible meaning that both of the following requests will produce the same output:
```
curl "http://localhost:5052/eth/v1/events?topics=head,block"
```
```
curl "http://localhost:5052/eth/v1/events?topics=head&topics=block"
```
## Additional Info
Certain error messages have changed slightly. This only affects endpoints which accept multiple values.
For example:
```
{"code":400,"message":"BAD_REQUEST: invalid query: Invalid query string","stacktraces":[]}
```
is now
```
{"code":400,"message":"BAD_REQUEST: unable to parse query","stacktraces":[]}
```
The serve order of the endpoints `get_beacon_state_validators` and `get_beacon_state_validators_id` have flipped:
```rust
.or(get_beacon_state_validators_id.boxed())
.or(get_beacon_state_validators.boxed())
```
This is to ensure proper error messages when filter fallback occurs due to the use of the `and_then` filter.
## Future Work
- Cleanup / remove filter fallback behaviour by substituting `and_then` with `then` where appropriate.
- Add regression tests for HTTP API error messages.
## Credits
- @mooori for doing the ground work of investigating possible solutions within the existing Rust ecosystem.
- @michaelsproul for writing [`serde_array_query`](https://github.com/sigp/serde_array_query) and for helping debug the behaviour of the `warp` filter fallback leading to incorrect error messages.
## Proposed Changes
Allocate less memory in sync by hashing the `SignedBeaconBlock`s in a batch directly, rather than going via SSZ bytes.
Credit to @paulhauner for finding this source of temporary allocations.
There is a pretty significant tradeoff between bandwidth and speed of gossipsub messages.
We can reduce our bandwidth usage considerably at the cost of minimally delaying gossipsub messages. The impact of delaying messages has not been analyzed thoroughly yet, however this PR in conjunction with some gossipsub updates show considerable bandwidth reduction.
This PR allows the user to set a CLI value (`network-load`) which is an integer in the range of 1 of 5 depending on their bandwidth appetite. 1 represents the least bandwidth but slowest message recieving and 5 represents the most bandwidth and fastest received message time.
For low-bandwidth users it is likely to be more efficient to use a lower value. The default is set to 3, which currently represents a reduced bandwidth usage compared to previous version of this PR. The previous lighthouse versions are equivalent to setting the `network-load` CLI to 4.
This PR is awaiting a few gossipsub updates before we can get it into lighthouse.
## Proposed Changes
Update `superstruct` to bring in @realbigsean's fixes necessary for MEV-compatible private beacon block types (a la #2795).
The refactoring is due to another change in superstruct that allows partial getters to be auto-generated.
## Issue Addressed
There was an overeager assert in the import of slashing protection data here:
fff01b24dd/validator_client/slashing_protection/src/slashing_database.rs (L939)
We were asserting that if the import contained any blocks for a validator, then the database should contain only a single block for that validator due to pruning/consolidation. However, we would only prune if the import contained _relevant blocks_ (that would actually change the maximum slot):
fff01b24dd/validator_client/slashing_protection/src/slashing_database.rs (L629-L633)
This lead to spurious failures (in the form of `ConsistencyError`s) when importing an interchange containing no new blocks for any of the validators. This wasn't hard to trigger, e.g. export and then immediately re-import the same file.
## Proposed Changes
This PR fixes the issue by simplifying the import so that it's more like the import for attestations. I.e. we make the assert true by always pruning when the imported file contains blocks.
In practice this doesn't have any downsides: if we import a new block then the behaviour is as before, except that we drop the `signing_root`. If we import an existing block or an old block then we prune the database to a single block. The only time this would be relevant is during extreme clock drift locally _plus_ import of a non-drifted interchange, which should occur infrequently.
## Additional Info
I've also added `Arbitrary` implementations to the slashing protection types so that we can fuzz them. I have a fuzzer sitting in a separate directory which I may or may not commit in a subsequent PR.
There's a new test in the standard interchange tests v5.2.1 that checks for this issue: https://github.com/eth-clients/slashing-protection-interchange-tests/pull/12
## Issue Addressed
Closes#2286Closes#2538Closes#2342
## Proposed Changes
Part II of major slasher optimisations after #2767
These changes will be backwards-incompatible due to the move to MDBX (and the schema change) 😱
* [x] Shrink attester keys from 16 bytes to 7 bytes.
* [x] Shrink attester records from 64 bytes to 6 bytes.
* [x] Separate `DiskConfig` from regular `Config`.
* [x] Add configuration for the LRU cache size.
* [x] Add a "migration" that deletes any legacy LMDB database.
## Issue Addressed
Resolves: https://github.com/sigp/lighthouse/issues/2741
Includes: https://github.com/sigp/lighthouse/pull/2853 so that we can get ssz static tests passing here on v1.1.6. If we want to merge that first, we can make this diff slightly smaller
## Proposed Changes
- Changes the `justified_epoch` and `finalized_epoch` in the `ProtoArrayNode` each to an `Option<Checkpoint>`. The `Option` is necessary only for the migration, so not ideal. But does allow us to add a default logic to `None` on these fields during the database migration.
- Adds a database migration from a legacy fork choice struct to the new one, search for all necessary block roots in fork choice by iterating through blocks in the db.
- updates related to https://github.com/ethereum/consensus-specs/pull/2727
- We will have to update the persisted forkchoice to make sure the justified checkpoint stored is correct according to the updated fork choice logic. This boils down to setting the forkchoice store's justified checkpoint to the justified checkpoint of the block that advanced the finalized checkpoint to the current one.
- AFAICT there's no migration steps necessary for the update to allow applying attestations from prior blocks, but would appreciate confirmation on that
- I updated the consensus spec tests to v1.1.6 here, but they will fail until we also implement the proposer score boost updates. I confirmed that the previously failing scenario `new_finalized_slot_is_justified_checkpoint_ancestor` will now pass after the boost updates, but haven't confirmed _all_ tests will pass because I just quickly stubbed out the proposer boost test scenario formatting.
- This PR now also includes proposer boosting https://github.com/ethereum/consensus-specs/pull/2730
## Additional Info
I realized checking justified and finalized roots in fork choice makes it more likely that we trigger this bug: https://github.com/ethereum/consensus-specs/pull/2727
It's possible the combination of justified checkpoint and finalized checkpoint in the forkchoice store is different from in any block in fork choice. So when trying to startup our store's justified checkpoint seems invalid to the rest of fork choice (but it should be valid). When this happens we get an `InvalidBestNode` error and fail to start up. So I'm including that bugfix in this branch.
Todo:
- [x] Fix fork choice tests
- [x] Self review
- [x] Add fix for https://github.com/ethereum/consensus-specs/pull/2727
- [x] Rebase onto Kintusgi
- [x] Fix `num_active_validators` calculation as @michaelsproul pointed out
- [x] Clean up db migrations
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
The version of `rusqlite` that we were depending on has been yanked due to a vulnerability. The vulnerability only affects `update_hook`, which we don't use in Lighthouse.
There is no need to push a release -- users are safe to ignore this warning.
## Additional Info
Incoming advisory: https://github.com/rustsec/advisory-db/pull/1117
* Change base_fee_per_gas to Uint256
* Add custom (de)serialization to ExecutionPayload
* Fix errors
* Add a quoted_u256 module
* Remove unused function
* lint
* Add test
* Remove extra line
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* update initializing from eth1 for merge genesis
* read execution payload header from file lcli
* add `create-payload-header` command to `lcli`
* fix base fee parsing
* Apply suggestions from code review
* default `execution_payload_header` bool to false when deserializing `meta.yml` in EF tests
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Added Execution Payload from Rayonism Fork
Updated new Containers to match Merge Spec
Updated BeaconBlockBody for Merge Spec
Completed updating BeaconState and BeaconBlockBody
Modified ExecutionPayload<T> to use Transaction<T>
Mostly Finished Changes for beacon-chain.md
Added some things for fork-choice.md
Update to match new fork-choice.md/fork.md changes
ran cargo fmt
Added Missing Pieces in eth2_libp2p for Merge
fix ef test
Various Changes to Conform Closer to Merge Spec
## Issue Addressed
Closes#1996
## Proposed Changes
Run a second `Logger` via `sloggers` which logs to a file in the background with:
- separate `debug-level` for background and terminal logging
- the ability to limit log size
- rotation through a customizable number of log files
- an option to compress old log files (`.gz` format)
Add the following new CLI flags:
- `--logfile-debug-level`: The debug level of the log files
- `--logfile-max-size`: The maximum size of each log file
- `--logfile-max-number`: The number of old log files to store
- `--logfile-compress`: Whether to compress old log files
By default background logging uses the `debug` log level and saves logfiles to:
- Beacon Node: `$HOME/.lighthouse/$network/beacon/logs/beacon.log`
- Validator Client: `$HOME/.lighthouse/$network/validators/logs/validator.log`
Or, when using the `--datadir` flag:
`$datadir/beacon/logs/beacon.log` and `$datadir/validators/logs/validator.log`
Once rotated, old logs are stored like so: `beacon.log.1`, `beacon.log.2` etc.
> Note: `beacon.log.1` is always newer than `beacon.log.2`.
## Additional Info
Currently the default value of `--logfile-max-size` is 200 (MB) and `--logfile-max-number` is 5.
This means that the maximum storage space that the logs will take up by default is 1.2GB.
(200MB x 5 from old log files + <200MB the current logfile being written to)
Happy to adjust these default values to whatever people think is appropriate.
It's also worth noting that when logging to a file, we lose our custom `slog` formatting. This means the logfile logs look like this:
```
Oct 27 16:02:50.305 INFO Lighthouse started, version: Lighthouse/v2.0.1-8edd9d4+, module: lighthouse:413
Oct 27 16:02:50.305 INFO Configured for network, name: prater, module: lighthouse:414
```
## Proposed Changes
Switch over to the latest published versions of the crates in the SSZ/`tree_hash` family.
## Additional Info
The crates were published at the current head of `unstable`: 0b319d4926. All 5 crates listed in this PR were published via tags, e.g. https://github.com/sigp/lighthouse/releases/tag/tree-hash-v0.4.0
