* move gossipsub into a separate crate
* Merge branch 'unstable' of github.com:sigp/lighthouse into separate-gossipsub
* address review 2
* clippy beta
* update logging to log gossipsub logs
* remove exit-future usage,
as it is non maintained, and replace with async-channel which is already in the repo.
* Merge branch 'unstable' of https://github.com/sigp/lighthouse into remove-exit-future
* Merge branch 'unstable' of https://github.com/sigp/lighthouse into remove-exit-future
* Lint fixes
* More fixes for beta compiler.
* Format fixes
* Move `#[allow(dead_code)]` to field level.
* Remove old comment.
* Update beacon_node/execution_layer/src/test_utils/mod.rs
Co-authored-by: João Oliveira <hello@jxs.pt>
* remove duplicate line
* update libp2p and address compiler errors
* remove bandwidth logging from transport
* use libp2p registry
* make clippy happy
* use rust 1.73
* correct rpc keep alive
* remove comments and obsolte code
* remove libp2p prefix
* make clippy happy
* use quic under facade
* remove fast msg id
* bubble up close statements
* fix wrong comment
## Issue Addressed
#4402
## Proposed Changes
This PR adds QUIC support to Lighthouse. As this is not officially spec'd this will only work between lighthouse <-> lighthouse connections. We attempt a QUIC connection (if the node advertises it) and if it fails we fallback to TCP.
This should be a backwards compatible modification. We want to test this functionality on live networks to observe any improvements in bandwidth/latency.
NOTE: This also removes the websockets transport as I believe no one is really using it. It should be mentioned in our release however.
Co-authored-by: João Oliveira <hello@jxs.pt>
## Issue Addressed
Addresses [#4401](https://github.com/sigp/lighthouse/issues/4401)
## Proposed Changes
Shift some constants into ```ChainSpec``` and remove the constant values from code space.
## Additional Info
I mostly used ```MainnetEthSpec::default_spec()``` for getting ```ChainSpec```. I wonder Did I make a mistake about that.
Co-authored-by: armaganyildirak <armaganyildirak@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Co-authored-by: Age Manning <Age@AgeManning.com>
Co-authored-by: Diva M <divma@protonmail.com>
## Issue Addressed
Upgrade libp2p to v0.52
## Proposed Changes
- **Workflows**: remove installation of `protoc`
- **Book**: remove installation of `protoc`
- **`Dockerfile`s and `cross`**: remove custom base `Dockerfile` for cross since it's no longer needed. Remove `protoc` from remaining `Dockerfiles`s
- **Upgrade `discv5` to `v0.3.1`:** we have some cool stuff in there: no longer needs `protoc` and faster ip updates on cold start
- **Upgrade `prometheus` to `0.21.0`**, now it no longer needs encoding checks
- **things that look like refactors:** bunch of api types were renamed and need to be accessed in a different (clearer) way
- **Lighthouse network**
- connection limits is now a behaviour
- banned peers no longer exist on the swarm level, but at the behaviour level
- `connection_event_buffer_size` now is handled per connection with a buffer size of 4
- `mplex` is deprecated and was removed
- rpc handler now logs the peer to which it belongs
## Additional Info
Tried to keep as much behaviour unchanged as possible. However, there is a great deal of improvements we can do _after_ this upgrade:
- Smart connection limits: Connection limits have been checked only based on numbers, we can now use information about the incoming peer to decide if we want it
- More powerful peer management: Dial attempts from other behaviours can be rejected early
- Incoming connections can be rejected early
- Banning can be returned exclusively to the peer management: We should not get connections to banned peers anymore making use of this
- TCP Nat updates: We might be able to take advantage of confirmed external addresses to check out tcp ports/ips
Co-authored-by: Age Manning <Age@AgeManning.com>
Co-authored-by: Akihito Nakano <sora.akatsuki@gmail.com>
## Issue Addressed
#2335
## Proposed Changes
- Remove the `lighthouse-network::tests::gossipsub_tests` module
- Remove dead code from the `lighthouse-network::tests::common` helper module (`build_full_mesh`)
## Additional Info
After discussion with both @divagant-martian and @AgeManning, these tests seem to have two main issues in that they are:
- Redundant, in that they don't test anything meaningful (due to our handling of duplicate messages)
- Out-of-place, in that it doesn't really test Lighthouse-specific functionality (rather libp2p functionality)
As such, this PR supersedes #4286.
* rename 4844 to deneb
* rename 4844 to deneb
* move excess data gas field
* get EF tests working
* fix ef tests lint
* fix the blob identifier ef test
* fix accessed files ef test script
* get beacon chain tests passing
## Issue Addressed
Add support for ipv6 and dual stack in lighthouse.
## Proposed Changes
From an user perspective, now setting an ipv6 address, optionally configuring the ports should feel exactly the same as using an ipv4 address. If listening over both ipv4 and ipv6 then the user needs to:
- use the `--listen-address` two times (ipv4 and ipv6 addresses)
- `--port6` becomes then required
- `--discovery-port6` can now be used to additionally configure the ipv6 udp port
### Rough list of code changes
- Discovery:
- Table filter and ip mode set to match the listening config.
- Ipv6 address, tcp port and udp port set in the ENR builder
- Reported addresses now check which tcp port to give to libp2p
- LH Network Service:
- Can listen over Ipv6, Ipv4, or both. This uses two sockets. Using mapped addresses is disabled from libp2p and it's the most compatible option.
- NetworkGlobals:
- No longer stores udp port since was not used at all. Instead, stores the Ipv4 and Ipv6 TCP ports.
- NetworkConfig:
- Update names to make it clear that previous udp and tcp ports in ENR were Ipv4
- Add fields to configure Ipv6 udp and tcp ports in the ENR
- Include advertised enr Ipv6 address.
- Add type to model Listening address that's either Ipv4, Ipv6 or both. A listening address includes the ip, udp port and tcp port.
- UPnP:
- Kept only for ipv4
- Cli flags:
- `--listen-addresses` now can take up to two values
- `--port` will apply to ipv4 or ipv6 if only one listening address is given. If two listening addresses are given it will apply only to Ipv4.
- `--port6` New flag required when listening over ipv4 and ipv6 that applies exclusively to Ipv6.
- `--discovery-port` will now apply to ipv4 and ipv6 if only one listening address is given.
- `--discovery-port6` New flag to configure the individual udp port of ipv6 if listening over both ipv4 and ipv6.
- `--enr-udp-port` Updated docs to specify that it only applies to ipv4. This is an old behaviour.
- `--enr-udp6-port` Added to configure the enr udp6 field.
- `--enr-tcp-port` Updated docs to specify that it only applies to ipv4. This is an old behaviour.
- `--enr-tcp6-port` Added to configure the enr tcp6 field.
- `--enr-addresses` now can take two values.
- `--enr-match` updated behaviour.
- Common:
- rename `unused_port` functions to specify that they are over ipv4.
- add functions to get unused ports over ipv6.
- Testing binaries
- Updated code to reflect network config changes and unused_port changes.
## Additional Info
TODOs:
- use two sockets in discovery. I'll get back to this and it's on https://github.com/sigp/discv5/pull/160
- lcli allow listening over two sockets in generate_bootnodes_enr
- add at least one smoke flag for ipv6 (I have tested this and works for me)
- update the book
## Issue Addressed
Cleans up all the remnants of 4844 in capella. This makes sure when 4844 is reviewed there is nothing we are missing because it got included here
## Proposed Changes
drop a bomb on every 4844 thing
## Additional Info
Merge process I did (locally) is as follows:
- squash merge to produce one commit
- in new branch off unstable with the squashed commit create a `git revert HEAD` commit
- merge that new branch onto 4844 with `--strategy ours`
- compare local 4844 to remote 4844 and make sure the diff is empty
- enjoy
Co-authored-by: Paul Hauner <paul@paulhauner.com>
I've needed to do this work in order to do some episub testing.
This version of libp2p has not yet been released, so this is left as a draft for when we wish to update.
Co-authored-by: Diva M <divma@protonmail.com>
