## Issue Addressed
#4146
## Proposed Changes
Removes the `ExecutionOptimisticForkVersionedResponse` type and the associated Beacon API endpoint which is now deprecated. Also removes the test associated with the endpoint.
## Issue Addressed
N/A
## Proposed Changes
Adds a flag for disabling peer scoring. This is useful for local testing and testing small networks for new features.
> This is currently a WIP and all features are subject to alteration or removal at any time.
## Overview
The successor to #2873.
Contains the backbone of `beacon.watch` including syncing code, the initial API, and several core database tables.
See `watch/README.md` for more information, requirements and usage.
It is possible that when we go to ban a peer, there is already an unbanned message in the queue. It could lead to the case that we ban and immediately unban a peer leaving us in a state where a should-be banned peer is unbanned.
If this banned peer connects to us in this faulty state, we currently do not attempt to re-ban it. This PR does correct this also, so if we do see this error, it will now self-correct (although we shouldn't see the error in the first place).
I have also incremented the severity of not supporting protocols as I see peers ultimately get banned in a few steps and it seems to make sense to just ban them outright, rather than have them linger.
## Issue Addressed
#3212
## Proposed Changes
- Introduce a new `rate_limiting_backfill_queue` - any new inbound backfill work events gets immediately sent to this FIFO queue **without any processing**
- Spawn a `backfill_scheduler` routine that pops a backfill event from the FIFO queue at specified intervals (currently halfway through a slot, or at 6s after slot start for 12s slots) and sends the event to `BeaconProcessor` via a `scheduled_backfill_work_tx` channel
- This channel gets polled last in the `InboundEvents`, and work event received is wrapped in a `InboundEvent::ScheduledBackfillWork` enum variant, which gets processed immediately or queued by the `BeaconProcessor` (existing logic applies from here)
Diagram comparing backfill processing with / without rate-limiting:
https://github.com/sigp/lighthouse/issues/3212#issuecomment-1386249922
See this comment for @paulhauner's explanation and solution: https://github.com/sigp/lighthouse/issues/3212#issuecomment-1384674956
## Additional Info
I've compared this branch (with backfill processing rate limited to to 1 and 3 batches per slot) against the latest stable version. The CPU usage during backfill sync is reduced by ~5% - 20%, more details on this page:
https://hackmd.io/@jimmygchen/SJuVpJL3j
The above testing is done on Goerli (as I don't currently have hardware for Mainnet), I'm guessing the differences are likely to be bigger on mainnet due to block size.
### TODOs
- [x] Experiment with processing multiple batches per slot. (need to think about how to do this for different slot durations)
- [x] Add option to disable rate-limiting, enabed by default.
- [x] (No longer required now we're reusing the reprocessing queue) Complete the `backfill_scheduler` task when backfill sync is completed or not required
## Issue Addressed
#3708
## Proposed Changes
- Add `is_finalized_block` method to `BeaconChain` in `beacon_node/beacon_chain/src/beacon_chain.rs`.
- Add `is_finalized_state` method to `BeaconChain` in `beacon_node/beacon_chain/src/beacon_chain.rs`.
- Add `fork_and_execution_optimistic_and_finalized` in `beacon_node/http_api/src/state_id.rs`.
- Add `ExecutionOptimisticFinalizedForkVersionedResponse` type in `consensus/types/src/fork_versioned_response.rs`.
- Add `execution_optimistic_finalized_fork_versioned_response`function in `beacon_node/http_api/src/version.rs`.
- Add `ExecutionOptimisticFinalizedResponse` type in `common/eth2/src/types.rs`.
- Add `add_execution_optimistic_finalized` method in `common/eth2/src/types.rs`.
- Update API response methods to include finalized.
- Remove `execution_optimistic_fork_versioned_response`
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Which issue # does this PR address?
https://github.com/sigp/lighthouse/issues/3669
## Proposed Changes
Please list or describe the changes introduced by this PR.
- A new API to fetch fork choice data, as specified [here](https://github.com/ethereum/beacon-APIs/pull/232)
- A new integration test to test the new API
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
- `extra_data` field specified in the beacon-API spec is not implemented, please let me know if I should instead.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
NA
## Proposed Changes
- Bump versions.
- Bump openssl version to resolve various `cargo audit` notices.
## Additional Info
- Requires further testing
## Issue Addressed
NA
## Proposed Changes
- Implements https://github.com/ethereum/consensus-specs/pull/3290/
- Bumps `ef-tests` to [v1.3.0-rc.4](https://github.com/ethereum/consensus-spec-tests/releases/tag/v1.3.0-rc.4).
The `CountRealizedFull` concept has been removed and the `--count-unrealized-full` and `--count-unrealized` BN flags now do nothing but log a `WARN` when used.
## Database Migration Debt
This PR removes the `best_justified_checkpoint` from fork choice. This field is persisted on-disk and the correct way to go about this would be to make a DB migration to remove the field. However, in this PR I've simply stubbed out the value with a junk value. I've taken this approach because if we're going to do a DB migration I'd love to remove the `Option`s around the justified and finalized checkpoints on `ProtoNode` whilst we're at it. Those options were added in #2822 which was included in Lighthouse v2.1.0. The options were only put there to handle the migration and they've been set to `Some` ever since v2.1.0. There's no reason to keep them as options anymore.
I started adding the DB migration to this branch but I started to feel like I was bloating this rather critical PR with nice-to-haves. I've kept the partially-complete migration [over in my repo](https://github.com/paulhauner/lighthouse/tree/fc-pr-18-migration) so we can pick it up after this PR is merged.
## Issue Addressed
NA
## Proposed Changes
Replaces #4058 to attempt to reduce `ERRO Failed to send scheduled attestation` spam and provide more information for diagnosis. With this PR we achieve:
- When dequeuing attestations after a block is received, send only one log which reports `n` failures (rather than `n` logs reporting `n` failures).
- Make a distinction in logs between two separate attestation dequeuing events.
- Add more information to both log events to help assist with troubleshooting.
## Additional Info
NA
This PR enables the user to adjust the shuffling cache size.
This is useful for some HTTP API requests which require re-computing old shufflings. This PR currently optimizes the
beacon/states/{state_id}/committees HTTP API by first checking the cache before re-building shuffling.
If the shuffling is set to a non-default value, then the HTTP API request will also fill the cache when as it constructs new shufflings.
If the CLI flag is not present or the value is set to the default of 16 the default behaviour is observed.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Currently Lighthouse will remain uncontactable if users port forward a port that is not the same as the one they are listening on.
For example, if Lighthouse runs with port 9000 TCP/UDP locally but a router is configured to pass 9010 externally to the lighthouse node on 9000, other nodes on the network will not be able to reach the lighthouse node.
This occurs because Lighthouse does not update its ENR TCP port on external socket discovery. The intention was always that users should use `--enr-tcp-port` to customise this, but this is non-intuitive.
The difficulty arises because we have no discovery mechanism to find our external TCP port. If we discovery a new external UDP port, we must guess what our external TCP port might be. This PR assumes the external TCP port is the same as the external UDP port (which may not be the case) and thus updates the TCP port along with the UDP port if the `--enr-tcp-port` flag is not set.
Along with this PR, will be added documentation to the Lighthouse book so users can correctly understand and configure their ENR to maximize Lighthouse's connectivity.
This relies on https://github.com/sigp/discv5/pull/166 and we should wait for a new release in discv5 before adding this PR.
If a node is also a bootnode it can try to add itself to its own local routing table which will emit an error.
The error is entirely harmless but we would prefer to avoid emitting the error.
This PR does not attempt to add a boot node ENR if that ENR corresponds to our local peer-id/node-id.
## Issue Addressed
Resolves#4061
## Proposed Changes
Adds a message to tell users to check their EE.
## Additional Info
I really struggled to come up with something succinct and complete, so I'm totally open to feedback.
## Issue Addressed
NA
## Proposed Changes
When producing a block from a builder, there are two points where we could consider the block "broadcast":
1. When the blinded block is published to the builder.
2. When the un-blinded block is published to the P2P network (this is always *after* the previous step).
Our logging for late block broadcasts was using (2) for builder-blocks, which was creating a lot of false-positive logs. This is because the builder publishes the block on the P2P network themselves before returning it to us and we perform (2). For clarity, the logs were false-positives because we claim that the block was published late by us when it was actually published earlier by the builder.
This PR changes our logging behavior so we do our logging at (1) instead. It also updates our metrics for block broadcast to distinguish between local and builder blocks. I believe the metrics change will be natively compatible with existing Grafana dashboards.
## Additional Info
One could argue that the builder *should* return the block to us faster, however that's not the case. I think it's more important that we don't desensitize users with false-positives.
## Issue Addressed
Closes#3814, replaces #3818.
## Proposed Changes
* Add a WARN log for the case where we are attempting to sync chain segments but can't process them because they're building on an invalid parent. The most common case where we see this is when the execution node database is corrupt, causing sync to stall mysteriously (because we're currently logging the failure only at debug level).
* Additionally I've bumped up the logging for invalid execution payloads to `WARN`. This may result in some duplicate logs as we log errors from the `beacon_chain` and then again from the beacon processor. Invalid payloads and corrupt DBs _should_ be rare enough that this doesn't produce overwhelming log volume.
There is a race condition which occurs when multiple discovery queries return at almost the exact same time and they independently contain a useful peer we would like to connect to.
The condition can occur that we can add the same peer to the dial queue, before we get a chance to process the queue.
This ends up displaying an error to the user:
```
ERRO Dialing an already dialing peer
```
Although this error is harmless it's not ideal.
There are two solutions to resolving this:
1. As we decide to dial the peer, we change the state in the peer-db to dialing (before we add it to the queue) which would prevent other requests from adding to the queue.
2. We prevent duplicates in the dial queue
This PR has opted for 2. because 1. will complicate the code in that we are changing states in non-intuitive places. Although this technically adds a very slight performance cost, its probably a cleaner solution as we can keep the state-changing logic in one place.
## Issue Addressed
#3938
## Proposed Changes
- `network::Processor` is deleted and all it's logic is moved to `network::Router`.
- The `network::Router` module is moved to a single file.
- The following functions are deleted: `on_disconnect` `send_status` `on_status_response` `on_blocks_by_root_request` `on_lightclient_bootstrap` `on_blocks_by_range_request` `on_block_gossip` `on_unaggregated_attestation_gossip` `on_aggregated_attestation_gossip` `on_voluntary_exit_gossip` `on_proposer_slashing_gossip` `on_attester_slashing_gossip` `on_sync_committee_signature_gossip` `on_sync_committee_contribution_gossip` `on_light_client_finality_update_gossip` `on_light_client_optimistic_update_gossip`. This deletions are possible because the updated `Router` allows the underlying methods to be called directly.
## Issue Addressed
- Add a complete match for `Protocol` here.
- The incomplete match was causing us not to append context bytes to the light client protocols
- This is the relevant part of the spec and it looks like context bytes are defined https://github.com/ethereum/consensus-specs/blob/dev/specs/altair/light-client/p2p-interface.md#getlightclientbootstrap
Disclaimer: I have no idea if people are using it but it shouldn't have been working so not sure why it wasn't caught
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
In #4027 I forgot to add the `parent_block_number` to the payload attributes SSE.
## Proposed Changes
Compute the parent block number while computing the pre-payload attributes. Pass it on to the SSE stream.
## Additional Info
Not essential for v3.5.1 as I suspect most builders don't need the `parent_block_root`. I would like to use it for my dummy no-op builder however.
## Issue Addressed
Add support for ipv6 and dual stack in lighthouse.
## Proposed Changes
From an user perspective, now setting an ipv6 address, optionally configuring the ports should feel exactly the same as using an ipv4 address. If listening over both ipv4 and ipv6 then the user needs to:
- use the `--listen-address` two times (ipv4 and ipv6 addresses)
- `--port6` becomes then required
- `--discovery-port6` can now be used to additionally configure the ipv6 udp port
### Rough list of code changes
- Discovery:
- Table filter and ip mode set to match the listening config.
- Ipv6 address, tcp port and udp port set in the ENR builder
- Reported addresses now check which tcp port to give to libp2p
- LH Network Service:
- Can listen over Ipv6, Ipv4, or both. This uses two sockets. Using mapped addresses is disabled from libp2p and it's the most compatible option.
- NetworkGlobals:
- No longer stores udp port since was not used at all. Instead, stores the Ipv4 and Ipv6 TCP ports.
- NetworkConfig:
- Update names to make it clear that previous udp and tcp ports in ENR were Ipv4
- Add fields to configure Ipv6 udp and tcp ports in the ENR
- Include advertised enr Ipv6 address.
- Add type to model Listening address that's either Ipv4, Ipv6 or both. A listening address includes the ip, udp port and tcp port.
- UPnP:
- Kept only for ipv4
- Cli flags:
- `--listen-addresses` now can take up to two values
- `--port` will apply to ipv4 or ipv6 if only one listening address is given. If two listening addresses are given it will apply only to Ipv4.
- `--port6` New flag required when listening over ipv4 and ipv6 that applies exclusively to Ipv6.
- `--discovery-port` will now apply to ipv4 and ipv6 if only one listening address is given.
- `--discovery-port6` New flag to configure the individual udp port of ipv6 if listening over both ipv4 and ipv6.
- `--enr-udp-port` Updated docs to specify that it only applies to ipv4. This is an old behaviour.
- `--enr-udp6-port` Added to configure the enr udp6 field.
- `--enr-tcp-port` Updated docs to specify that it only applies to ipv4. This is an old behaviour.
- `--enr-tcp6-port` Added to configure the enr tcp6 field.
- `--enr-addresses` now can take two values.
- `--enr-match` updated behaviour.
- Common:
- rename `unused_port` functions to specify that they are over ipv4.
- add functions to get unused ports over ipv6.
- Testing binaries
- Updated code to reflect network config changes and unused_port changes.
## Additional Info
TODOs:
- use two sockets in discovery. I'll get back to this and it's on https://github.com/sigp/discv5/pull/160
- lcli allow listening over two sockets in generate_bootnodes_enr
- add at least one smoke flag for ipv6 (I have tested this and works for me)
- update the book
## Proposed Changes
The current `/lighthouse/nat` implementation checks for _zero_ address updated messages, when it should check for a _non-zero_ number. This was spotted while debugging an issue on Discord where a user's ports weren't forwarded but `/lighthouse/nat` was still returning `true`.
## Issue Addressed
#3435
## Proposed Changes
Fire a warning with the path of JWT to be created when the path given by --execution-jwt is not found
Currently, the same error is logged if the jwt is found but doesn't match the execution client's jwt, and if no jwt was found at the given path. This makes it very hard to tell if you accidentally typed the wrong path, as a new jwt is created silently that won't match the execution client's jwt. So instead, it will now fire a warning stating that a jwt is being generated at the given path.
## Additional Info
In the future, it may be smarter to handle this case by adding an InvalidJWTPath member to the Error enum in lib.rs or auth.rs
that can be handled during upcheck()
This is my first PR and first project with rust. so thanks to anyone who looks at this for their patience and help!
Co-authored-by: Sebastian Richel <47844429+sebastianrich18@users.noreply.github.com>
## Proposed Changes
Two tiny updates to satisfy Clippy 1.68
Plus refactoring of the `http_api` into less complex types so the compiler can chew and digest them more easily.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
#4040
## Proposed Changes
- Add the `always_prefer_builder_payload` field to `Config` in `beacon_node/client/src/config.rs`.
- Add that same field to `Inner` in `beacon_node/execution_layer/src/lib.rs`
- Modify the logic for picking the payload in `beacon_node/execution_layer/src/lib.rs`
- Add the `always-prefer-builder-payload` flag to the beacon node CLI
- Test the new flags in `lighthouse/tests/beacon_node.rs`
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
Closes#3896Closes#3998Closes#3700
## Proposed Changes
- Optimise the calculation of withdrawals for payload attributes by avoiding state clones, avoiding unnecessary state advances and reading from the snapshot cache if possible.
- Use the execution layer's payload attributes cache to avoid re-calculating payload attributes. I actually implemented a new LRU cache just for withdrawals but it had the exact same key and most of the same data as the existing payload attributes cache, so I deleted it.
- Add a new SSE event that fires when payloadAttributes are calculated. This is useful for block builders, a la https://github.com/ethereum/beacon-APIs/issues/244.
- Add a new CLI flag `--always-prepare-payload` which forces payload attributes to be sent with every fcU regardless of connected proposers. This is intended for use by builders/relays.
For maximum effect, the flags I've been using to run Lighthouse in "payload builder mode" are:
```
--always-prepare-payload \
--prepare-payload-lookahead 12000 \
--suggested-fee-recipient 0x0000000000000000000000000000000000000000
```
The fee recipient is required so Lighthouse has something to pack in the payload attributes (it can be ignored by the builder). The lookahead causes fcU to be sent at the start of every slot rather than at 8s. As usual, fcU will also be sent after each change of head block. I think this combination is sufficient for builders to build on all viable heads. Often there will be two fcU (and two payload attributes) sent for the same slot: one sent at the start of the slot with the head from `n - 1` as the parent, and one sent after the block arrives with `n` as the parent.
Example usage of the new event stream:
```bash
curl -N "http://localhost:5052/eth/v1/events?topics=payload_attributes"
```
## Additional Info
- [x] Tests added by updating the proposer re-org tests. This has the benefit of testing the proposer re-org code paths with withdrawals too, confirming that the new changes don't interact poorly.
- [ ] Benchmarking with `blockdreamer` on devnet-7 showed promising results but I'm yet to do a comparison to `unstable`.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
NA
## Proposed Changes
As discovered in #4034, Lighthouse is not accepting `latest_valid_hash == None` in an `INVALID` response to `newPayload`. The `null`/`None` response *was* illegal at one point, however it was added in https://github.com/ethereum/execution-apis/pull/254.
This PR brings Lighthouse in line with the standard and should fix the root cause of what #4034 patched around.
## Additional Info
NA
## Issue Addressed
Cleaner resolution for #4006
## Proposed Changes
We are currently subscribing to core topics of new forks way before the actual fork since we had just a single `CORE_TOPICS` array. This PR separates the core topics for every fork and subscribes to only required topics based on the current fork.
Also adds logic for subscribing to the core topics of a new fork only 2 slots before the fork happens.
2 slots is to give enough time for the gossip meshes to form.
Currently doesn't add logic to remove topics from older forks in new forks. For e.g. in the coupled 4844 world, we had to remove the `BeaconBlock` topic in favour of `BeaconBlocksAndBlobsSidecar` at the 4844 fork. It should be easy enough to add though. Not adding it because I'm assuming that #4019 will get merged before this PR and we won't require any deletion logic. Happy to add it regardless though.
## Issue Addressed
Cleans up all the remnants of 4844 in capella. This makes sure when 4844 is reviewed there is nothing we are missing because it got included here
## Proposed Changes
drop a bomb on every 4844 thing
## Additional Info
Merge process I did (locally) is as follows:
- squash merge to produce one commit
- in new branch off unstable with the squashed commit create a `git revert HEAD` commit
- merge that new branch onto 4844 with `--strategy ours`
- compare local 4844 to remote 4844 and make sure the diff is empty
- enjoy
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
Adds two new `DEBG` logs to the HTTP API:
1. As soon as we are requested to produce a block.
2. As soon as a signed block is received.
In #3858 we added some very helpful logs to the VC so we could see when things are happening with block proposals in the VC. After doing some more debugging, I found that I can tell when the VC is sending a block but I *can't* tell the time that the BN receives it (I can only get the time after the BN has started doing some work with the block). Knowing when the VC published and as soon as the BN receives is useful for determining the delays introduced by network latency (and some other things like JSON decoding, etc).
## Additional Info
NA
This fixes issues with certain metrics scrapers, which might error if the content-type is not correctly set.
## Issue Addressed
Fixes https://github.com/sigp/lighthouse/issues/3437
## Proposed Changes
Simply set header: `Content-Type: text/plain` on metrics server response. Seems like the errored branch does this correctly already.
## Additional Info
This is needed also to enable influx-db metric scraping which work very nicely with Geth.
## Proposed Changes
Allowing compiling without MDBX by running:
```bash
CARGO_INSTALL_EXTRA_FLAGS="--no-default-features" make
```
The reasons to do this are several:
- Save compilation time if the slasher won't be used
- Work around compilation errors in slasher backend dependencies (our pinned version of MDBX is currently not compiling on FreeBSD with certain compiler versions).
## Additional Info
When I opened this PR we were using resolver v1 which [doesn't disable default features in dependencies](https://doc.rust-lang.org/cargo/reference/features.html#resolver-version-2-command-line-flags), and `mdbx` is default for the `slasher` crate. Even after the resolver got changed to v2 in #3697 compiling with `--no-default-features` _still_ wasn't turning off the slasher crate's default features, so I added `default-features = false` in all the places we depend on it.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
NA
## Proposed Changes
- Bump versions
## Sepolia Capella Upgrade
This release will enable the Capella fork on Sepolia. We are planning to publish this release on the 23rd of Feb 2023.
Users who can build from source and wish to do pre-release testing can use this branch.
## Additional Info
- [ ] Requires further testing
This is a correction to #3757.
The correction registers a peer that is being disconnected in the local peer manager db to ensure we are tracking the correct state.
## Issue Addressed
#3804
## Proposed Changes
- Add `total_balance` to the validator monitor and adjust the number of historical epochs which are cached.
- Allow certain values in the cache to be served out via the HTTP API without requiring a state read.
## Usage
```
curl -X POST "http://localhost:5052/lighthouse/ui/validator_info" -d '{"indices": [0]}' -H "Content-Type: application/json" | jq
```
```
{
"data": {
"validators": {
"0": {
"info": [
{
"epoch": 172981,
"total_balance": 36566388519
},
...
{
"epoch": 172990,
"total_balance": 36566496513
}
]
},
"1": {
"info": [
{
"epoch": 172981,
"total_balance": 36355797968
},
...
{
"epoch": 172990,
"total_balance": 36355905962
}
]
}
}
}
}
```
## Additional Info
This requires no historical states to operate which mean it will still function on the freshly checkpoint synced node, however because of this, the values will populate each epoch (up to a maximum of 10 entries).
Another benefit of this method, is that we can easily cache any other values which would normally require a state read and serve them via the same endpoint. However, we would need be cautious about not overly increasing block processing time by caching values from complex computations.
This also caches some of the validator metrics directly, rather than pulling them from the Prometheus metrics when the API is called. This means when the validator count exceeds the individual monitor threshold, the cached values will still be available.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Remove CapellaReadiness::NotSynced
Some EEs have a habit of flipping between synced/not-synced, which causes some
spurious "Not read for the merge" messages back before the merge. For the
merge, if the EE wasn't synced the CE simple wouldn't go through the transition
(due to optimistic sync stuff). However, we don't have that hard requirement
for Capella; the CE will go through the fork and just wait for the EE to catch
up. I think that removing `NotSynced` here will avoid false-positives on the
"Not ready logs..". We'll be creating other WARN/ERRO logs if the EE isn't
synced, anyway.
* Change some Capella readiness logging
There's two changes here:
1. Shorten the log messages, for readability.
2. Change the hints.
Connecting a Capella-ready LH to a non-Capella-ready EE gives this log:
```
WARN Not ready for Capella info: The execution endpoint does not appear to support the required engine api methods for Capella: Required Methods Unsupported: engine_getPayloadV2 engine_forkchoiceUpdatedV2 engine_newPayloadV2, service: slot_notifier
```
This variant of error doesn't get a "try updating" style hint, when it's the
one that needs it. This is because we detect the method-not-found reponse from
the EE and return default capabilities, rather than indicating that the request
fails. I think it's fair to say that an EE upgrade is required whenever it
doesn't provide the required methods.
I changed the `ExchangeCapabilitiesFailed` message since that can only happen
when the EE fails to respond with anything other than success or not-found.
## Issue Addressed
Windows tests for subscription and unsubscriptions fail in CI sporadically. We usually ignore this failures, so this PR aims to help reduce the failure noise. Associated issue is https://github.com/sigp/lighthouse/issues/3960
On heavily crowded networks, we are seeing many attempted connections to our node every second.
Often these connections come from peers that have just been disconnected. This can be for a number of reasons including:
- We have deemed them to be not as useful as other peers
- They have performed poorly
- They have dropped the connection with us
- The connection was spontaneously lost
- They were randomly removed because we have too many peers
In all of these cases, if we have reached or exceeded our target peer limit, there is no desire to accept new connections immediately after the disconnect from these peers. In fact, it often costs us resources to handle the established connections and defeats some of the logic of dropping them in the first place.
This PR adds a timeout, that prevents recently disconnected peers from reconnecting to us.
Technically we implement a ban at the swarm layer to prevent immediate re connections for at least 10 minutes. I decided to keep this light, and use a time-based LRUCache which only gets updated during the peer manager heartbeat to prevent added stress of polling a delay map for what could be a large number of peers.
This cache is bounded in time. An extra space bound could be added should people consider this a risk.
Co-authored-by: Diva M <divma@protonmail.com>
## Issue Addressed
Fix a bug introduced by #3696. The bug is not expected to occur frequently, so releasing this PR is non-urgent.
## Proposed Changes
* Add a variant to `StoreOp` that allows a raw KV operation to be passed around.
* Return to using `self.store.do_atomically` rather than `self.store.hot_db.do_atomically`. This streamlines the write back into a single call and makes our auto-revert work again.
* Prevent `import_block_update_shuffling_cache` from failing block import. This is an outstanding bug from before v3.4.0 which may have contributed to some random unexplained database corruption.
## Additional Info
In #3696 I split the database write into two calls, one to convert the `StoreOp`s to `KeyValueStoreOp`s and one to write them. This had the unfortunate side-effect of damaging our atomicity guarantees in case of a write error. If the first call failed, we would be left with the block in fork choice but not on-disk (or the snapshot cache), which would prevent us from processing any descendant blocks. On `unstable` the first call is very unlikely to fail unless the disk is full, but on `tree-states` the conversion is more involved and a user reported database corruption after it failed in a way that should have been recoverable.
Additionally, as @emhane observed, #3696 also inadvertently removed the import of the new block into the block cache. Although this seems like it could have negatively impacted performance, there are several mitigating factors:
- For regular block processing we should almost always load the parent block (and state) from the snapshot cache.
- We often load blinded blocks, which bypass the block cache anyway.
- Metrics show no noticeable increase in the block cache miss rate with v3.4.0.
However, I expect the block cache _will_ be useful again in `tree-states`, so it is restored to use by this PR.
## Issue Addressed
NA
## Proposed Changes
Our `ERRO` stream has been rather noisy since the merge due to some unexpected behaviours of builders and EEs. Now that we've been running post-merge for a while, I think we can drop some of these `ERRO` to `WARN` so we're not "crying wolf".
The modified logs are:
#### `ERRO Execution engine call failed`
I'm seeing this quite frequently on Geth nodes. They seem to timeout when they're busy and it rarely indicates a serious issue. We also have logging across block import, fork choice updating and payload production that raise `ERRO` or `CRIT` when the EE times out, so I think we're not at risk of silencing actual issues.
#### `ERRO "Builder failed to reveal payload"`
In #3775 we reduced this log from `CRIT` to `ERRO` since it's common for builders to fail to reveal the block to the producer directly whilst still broadcasting it to the networ. I think it's worth dropping this to `WARN` since it's rarely interesting.
I elected to stay with `WARN` since I really do wish builders would fulfill their API promises by returning the block to us. Perhaps I'm just being pedantic here, I could be convinced otherwise.
#### `ERRO "Relay error when registering validator(s)"`
It seems like builders and/or mev-boost struggle to handle heavy loads of validator registrations. I haven't observed issues with validators not actually being registered, but I see timeouts on these endpoints many times a day. It doesn't seem like this `ERRO` is worth it.
#### `ERRO Error fetching block for peer ExecutionLayerErrorPayloadReconstruction`
This means we failed to respond to a peer on the P2P network with a block they requested because of an error in the `execution_layer`. It's very common to see timeouts or incomplete responses on this endpoint whilst the EE is busy and I don't think it's important enough for an `ERRO`. As long as the peer count stays high, I don't think the user needs to be actively concerned about how we're responding to peers.
## Additional Info
NA
## Issue Addressed
NA
## Description
We were missing an edge case when checking to see if a block is a descendant of the finalized checkpoint. This edge case is described for one of the tests in this PR:
a119edc739/consensus/proto_array/src/proto_array_fork_choice.rs (L1018-L1047)
This bug presented itself in the following mainnet log:
```
Jan 26 15:12:42.841 ERRO Unable to validate attestation error: MissingBeaconState(0x7c30cb80ec3d4ec624133abfa70e4c6cfecfca456bfbbbff3393e14e5b20bf25), peer_id: 16Uiu2HAm8RPRciXJYtYc5c3qtCRdrZwkHn2BXN3XP1nSi1gxHYit, type: "unaggregated", slot: Slot(5660161), beacon_block_root: 0x4a45e59da7cb9487f4836c83bdd1b741b4f31c67010c7ae343fa6771b3330489
```
Here the BN is rejecting an attestation because of a "missing beacon state". Whilst it was correct to reject the attestation, it should have rejected it because it attests to a block that conflicts with finality rather than claiming that the database is inconsistent.
The block that this attestation points to (`0x4a45`) is block `C` in the above diagram. It is a non-canonical block in the first slot of an epoch that conflicts with the finalized checkpoint. Due to our lazy pruning of proto array, `0x4a45` was still present in proto-array. Our missed edge-case in [`ForkChoice::is_descendant_of_finalized`](38514c07f2/consensus/fork_choice/src/fork_choice.rs (L1375-L1379)) would have indicated to us that the block is a descendant of the finalized block. Therefore, we would have accepted the attestation thinking that it attests to a descendant of the finalized *checkpoint*.
Since we didn't have the shuffling for this erroneously processed block, we attempted to read its state from the database. This failed because we prune states from the database by keeping track of the tips of the chain and iterating back until we find a finalized block. This would have deleted `C` from the database, hence the `MissingBeaconState` error.
## Issue Addressed
Adds self rate limiting options, mainly with the idea to comply with peer's rate limits in small testnets
## Proposed Changes
Add a hidden flag `self-limiter` this can take no value, or customs values to configure quotas per protocol
## Additional Info
### How to use
`--self-limiter` will turn on the self rate limiter applying the same params we apply to inbound requests (requests from other peers)
`--self-limiter "beacon_blocks_by_range:64/1"` will turn on the self rate limiter for ALL protocols, but change the quota for bbrange to 64 requested blocks per 1 second.
`--self-limiter "beacon_blocks_by_range:64/1;ping:1/10"` same as previous one, changing the quota for ping as well.
### Caveats
- The rate limiter is either on or off for all protocols. I added the custom values to be able to change the quotas per protocol so that some protocols can be given extremely loose or tight quotas. I think this should satisfy every need even if we can't technically turn off rate limits per protocol.
- This reuses the rate limiter struct for the inbound requests so there is this ugly part of the code in which we need to deal with the inbound only protocols (light client stuff) if this becomes too ugly as we add lc protocols, we might want to split the rate limiters. I've checked this and looks doable with const generics to avoid so much code duplication
### Knowing if this is on
```
Feb 06 21:12:05.493 DEBG Using self rate limiting params config: OutboundRateLimiterConfig { ping: 2/10s, metadata: 1/15s, status: 5/15s, goodbye: 1/10s, blocks_by_range: 1024/10s, blocks_by_root: 128/10s }, service: libp2p_rpc, service: libp2p
```
* Add first efforts at broadcast
* Tidy
* Move broadcast code to client
* Progress with broadcast impl
* Rename to address change
* Fix compile errors
* Use `while` loop
* Tidy
* Flip broadcast condition
* Switch to forgetting individual indices
* Always broadcast when the node starts
* Refactor into two functions
* Add testing
* Add another test
* Tidy, add more testing
* Tidy
* Add test, rename enum
* Rename enum again
* Tidy
* Break loop early
* Add V15 schema migration
* Bump schema version
* Progress with migration
* Update beacon_node/client/src/address_change_broadcast.rs
Co-authored-by: Michael Sproul <micsproul@gmail.com>
* Fix typo in function name
---------
Co-authored-by: Michael Sproul <micsproul@gmail.com>
* Use Local Payload if More Profitable than Builder
* Rename clone -> clone_from_ref
* Minimize Clones of GetPayloadResponse
* Cleanup & Fix Tests
* Added Tests for Payload Choice by Profit
* Fix Outdated Comments
## Proposed Changes
Clippy 1.67.0 put us on blast for the size of some of our errors, most of them written by me ( 👀 ). This PR shrinks the size of `BeaconChainError` by dropping some extraneous info and boxing an inner error which should only occur infrequently anyway.
For the `AttestationSlashInfo` and `BlockSlashInfo` I opted to ignore the lint as they are always used in a `Result<A, Info>` where `A` is a similar size. This means they don't bloat the size of the `Result`, so it's a bit annoying for Clippy to report this as an issue.
I also chose to ignore `clippy::uninlined-format-args` because I think the benefit-to-churn ratio is too low. E.g. sometimes we have long identifiers in `format!` args and IMO the non-inlined form is easier to read:
```rust
// I prefer this...
format!(
"{} did {} to {}",
REALLY_LONG_CONSTANT_NAME,
ANOTHER_REALLY_LONG_CONSTANT_NAME,
regular_long_identifier_name
);
// To this
format!("{REALLY_LONG_CONSTANT_NAME} did {ANOTHER_REALLY_LONG_CONSTANT_NAME} to {regular_long_identifier_name}");
```
I tried generating an automatic diff with `cargo clippy --fix` but it came out at:
```
250 files changed, 1209 insertions(+), 1469 deletions(-)
```
Which seems like a bad idea when we'd have to back-merge it to `capella` and `eip4844` 😱
## Issue Addressed
Currently there is a race between receiving blocks and receiving light client optimistic updates (in unstable), which results in processing errors. This is a continuation of PR #3693 and seeks to progress on issue #3651
## Proposed Changes
Add the parent_root to ReprocessQueueMessage::BlockImported so we can remove blocks from queue when a block arrives that has the same parent root. We use the parent root as opposed to the block_root because the LightClientOptimisticUpdate does not contain the block_root.
If light_client_optimistic_update.attested_header.canonical_root() != head_block.message().parent_root() then we queue the update. Otherwise we process immediately.
## Additional Info
michaelsproul came up with this idea.
The code was heavily based off of the attestation reprocessing.
I have not properly tested this to see if it works as intended.
* Use eth1_withdrawal_credential in Some Test States
* Update beacon_node/genesis/src/interop.rs
Co-authored-by: Michael Sproul <micsproul@gmail.com>
* Update beacon_node/genesis/src/interop.rs
Co-authored-by: Michael Sproul <micsproul@gmail.com>
* Increase validator sizes
* Pick next sync committee message
Co-authored-by: Michael Sproul <micsproul@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* Import BLS to execution changes before Capella
* Test for BLS to execution change HTTP API
* Pack BLS to execution changes in LIFO order
* Remove unused var
* Clippy
We recently ran a large-block experiment on the testnet and plan to do a further experiment on mainnet.
Although the metrics recovered from lighthouse nodes were quite useful, I think we could do with greater resolution in the block delay metrics and get some specific values for each block (currently these can be lost to large exponential histogram buckets).
This PR increases the resolution of the block delay histogram buckets, but also introduces a new metric which records the last block delay. Depending on the polling resolution of the metric server, we can lose some block delay information, however it will always give us a specific value and we will not lose exact data based on poor resolution histogram buckets.
## Issue Addressed
Issue #3112
## Proposed Changes
Add `Filter::recover` to the GET chain to handle rejections specifically as 404 NOT FOUND
## Additional Info
Making a request to `http://localhost:5052/not_real` now returns the following:
```
{
"code": 404,
"message": "NOT_FOUND",
"stacktraces": []
}
```
Co-authored-by: Paul Hauner <paul@paulhauner.com>
* add historical summaries
* fix tree hash caching, disable the sanity slots test with fake crypto
* add ssz static HistoricalSummary
* only store historical summaries after capella
* Teach `UpdatePattern` about Capella
* Tidy EF tests
* Clippy
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
Myself and others (#3678) have observed that when running with lots of validators (e.g., 1000s) the cardinality is too much for Prometheus. I've seen Prometheus instances just grind to a halt when we turn the validator monitor on for our testnet validators (we have 10,000s of Goerli validators). Additionally, the debug log volume can get very high with one log per validator, per attestation.
To address this, the `bn --validator-monitor-individual-tracking-threshold <INTEGER>` flag has been added to *disable* per-validator (i.e., non-aggregated) metrics/logging once the validator monitor exceeds the threshold of validators. The default value is `64`, which is a finger-to-the-wind value. I don't actually know the value at which Prometheus starts to become overwhelmed, but I've seen it work with ~64 validators and I've seen it *not* work with 1000s of validators. A default of `64` seems like it will result in a breaking change to users who are running millions of dollars worth of validators whilst resulting in a no-op for low-validator-count users. I'm open to changing this number, though.
Additionally, this PR starts collecting aggregated Prometheus metrics (e.g., total count of head hits across all validators), so that high-validator-count validators still have some interesting metrics. We already had logging for aggregated values, so nothing has been added there.
I've opted to make this a breaking change since it can be rather damaging to your Prometheus instance to accidentally enable the validator monitor with large numbers of validators. I've crashed a Prometheus instance myself and had a report from another user who's done the same thing.
## Additional Info
NA
## Breaking Changes Note
A new label has been added to the validator monitor Prometheus metrics: `total`. This label tracks the aggregated metrics of all validators in the validator monitor (as opposed to each validator being tracking individually using its pubkey as the label).
Additionally, a new flag has been added to the Beacon Node: `--validator-monitor-individual-tracking-threshold`. The default value is `64`, which means that when the validator monitor is tracking more than 64 validators then it will stop tracking per-validator metrics and only track the `all_validators` metric. It will also stop logging per-validator logs and only emit aggregated logs (the exception being that exit and slashing logs are always emitted).
These changes were introduced in #3728 to address issues with untenable Prometheus cardinality and log volume when using the validator monitor with high validator counts (e.g., 1000s of validators). Users with less than 65 validators will see no change in behavior (apart from the added `all_validators` metric). Users with more than 65 validators who wish to maintain the previous behavior can set something like `--validator-monitor-individual-tracking-threshold 999999`.
## Issue Addressed
Recent discussions with other client devs about optimistic sync have revealed a conceptual issue with the optimisation implemented in #3738. In designing that feature I failed to consider that the execution node checks the `blockHash` of the execution payload before responding with `SYNCING`, and that omitting this check entirely results in a degradation of the full node's validation. A node omitting the `blockHash` checks could be tricked by a supermajority of validators into following an invalid chain, something which is ordinarily impossible.
## Proposed Changes
I've added verification of the `payload.block_hash` in Lighthouse. In case of failure we log a warning and fall back to verifying the payload with the execution client.
I've used our existing dependency on `ethers_core` for RLP support, and a new dependency on Parity's `triehash` crate for the Merkle patricia trie. Although the `triehash` crate is currently unmaintained it seems like our best option at the moment (it is also used by Reth, and requires vastly less boilerplate than Parity's generic `trie-root` library).
Block hash verification is pretty quick, about 500us per block on my machine (mainnet).
The optimistic finalized sync feature can be disabled using `--disable-optimistic-finalized-sync` which forces full verification with the EL.
## Additional Info
This PR also introduces a new dependency on our [`metastruct`](https://github.com/sigp/metastruct) library, which was perfectly suited to the RLP serialization method. There will likely be changes as `metastruct` grows, but I think this is a good way to start dogfooding it.
I took inspiration from some Parity and Reth code while writing this, and have preserved the relevant license headers on the files containing code that was copied and modified.
I've needed to do this work in order to do some episub testing.
This version of libp2p has not yet been released, so this is left as a draft for when we wish to update.
Co-authored-by: Diva M <divma@protonmail.com>
Our custom RPC implementation is lagging from the libp2p v50 version.
We are going to need to change a bunch of function names and would be nice to have consistent ordering of function names inside the handlers.
This is a precursor to the libp2p upgrade to minimize merge conflicts in function ordering.
## Issue Addressed
While testing withdrawals with @ethDreamer we noticed lighthouse is sending empty batches when an error occurs. As LH peer receiving this, we would consider this a low tolerance action because the peer is claiming the batch is right and is empty.
## Proposed Changes
If any kind of error occurs, send a error response instead
## Additional Info
Right now we don't handle such thing as a partial batch with an error. If an error is received, the whole batch is discarded. Because of this it makes little sense to send partial batches that end with an error, so it's better to do the proposed solution instead of sending empty batches.
## Proposed Changes
With proposer boosting implemented (#2822) we have an opportunity to re-org out late blocks.
This PR adds three flags to the BN to control this behaviour:
* `--disable-proposer-reorgs`: turn aggressive re-orging off (it's on by default).
* `--proposer-reorg-threshold N`: attempt to orphan blocks with less than N% of the committee vote. If this parameter isn't set then N defaults to 20% when the feature is enabled.
* `--proposer-reorg-epochs-since-finalization N`: only attempt to re-org late blocks when the number of epochs since finalization is less than or equal to N. The default is 2 epochs, meaning re-orgs will only be attempted when the chain is finalizing optimally.
For safety Lighthouse will only attempt a re-org under very specific conditions:
1. The block being proposed is 1 slot after the canonical head, and the canonical head is 1 slot after its parent. i.e. at slot `n + 1` rather than building on the block from slot `n` we build on the block from slot `n - 1`.
2. The current canonical head received less than N% of the committee vote. N should be set depending on the proposer boost fraction itself, the fraction of the network that is believed to be applying it, and the size of the largest entity that could be hoarding votes.
3. The current canonical head arrived after the attestation deadline from our perspective. This condition was only added to support suppression of forkchoiceUpdated messages, but makes intuitive sense.
4. The block is being proposed in the first 2 seconds of the slot. This gives it time to propagate and receive the proposer boost.
## Additional Info
For the initial idea and background, see: https://github.com/ethereum/consensus-specs/pull/2353#issuecomment-950238004
There is also a specification for this feature here: https://github.com/ethereum/consensus-specs/pull/3034
Co-authored-by: Michael Sproul <micsproul@gmail.com>
Co-authored-by: pawan <pawandhananjay@gmail.com>
## Issue Addressed
NA
## Proposed Changes
This is a *potentially* contentious change, but I find it annoying that the validator monitor logs `WARN` and `ERRO` for imperfect attestations. Perfect attestation performance is unachievable (don't believe those photo-shopped beauty magazines!) since missed and poorly-packed blocks by other validators will reduce your performance.
When the validator monitor is on with 10s or more validators, I find the logs are washed out with ERROs that are not worth investigating. I suspect that users who really want to know if validators are missing attestations can do so by matching the content of the log, rather than the log level.
I'm open to feedback about this, especially from anyone who is relying on the current log levels.
## Additional Info
NA
## Breaking Changes Notes
The validator monitor will no longer emit `WARN` and `ERRO` logs for sub-optimal attestation performance. The logs will now be emitted at `INFO` level. This change was introduced to avoid cluttering the `WARN` and `ERRO` logs with alerts that are frequently triggered by the actions of other network participants (e.g., a missed block) and require no action from the user.
## Issue Addressed
Implementing the light_client_gossip topics but I'm not there yet.
Which issue # does this PR address?
Partially #3651
## Proposed Changes
Add light client gossip topics.
Please list or describe the changes introduced by this PR.
I'm going to Implement light_client_finality_update and light_client_optimistic_update gossip topics. Currently I've attempted the former and I'm seeking feedback.
## Additional Info
I've only implemented the light_client_finality_update topic because I wanted to make sure I was on the correct path. Also checking that the gossiped LightClientFinalityUpdate is the same as the locally constructed one is not implemented because caching the updates will make this much easier. Could someone give me some feedback on this please?
Please provide any additional information. For example, future considerations
or information useful for reviewers.
Co-authored-by: GeemoCandama <104614073+GeemoCandama@users.noreply.github.com>
## Issue Addressed
NA
## Proposed Changes
In #3725 I introduced a `CRIT` log for unrevealed payloads, against @michaelsproul's [advice](https://github.com/sigp/lighthouse/pull/3725#discussion_r1034142113). After being woken up in the middle of the night by a block that was not revealed to the BN but *was* revealed to the network, I have capitulated. This PR implements @michaelsproul's suggestion and reduces the severity to `ERRO`.
Additionally, I have dropped a `CRIT` to an `ERRO` for when a block is published late. The block in question was indeed published late on the network, however now that we have builders that can slow down block production I don't think the error is "actionable" enough to warrant a `CRIT` for the user.
## Additional Info
NA
## Issue Addressed
#3724
## Proposed Changes
Exposes certain `validator_monitor` as an endpoint on the HTTP API. Will only return metrics for validators which are actively being monitored.
### Usage
```bash
curl -X GET "http://localhost:5052/lighthouse/ui/validator_metrics" -H "accept: application/json" | jq
```
```json
{
"data": {
"validators": {
"12345": {
"attestation_hits": 10,
"attestation_misses": 0,
"attestation_hit_percentage": 100,
"attestation_head_hits": 10,
"attestation_head_misses": 0,
"attestation_head_hit_percentage": 100,
"attestation_target_hits": 5,
"attestation_target_misses": 5,
"attestation_target_hit_percentage": 50
}
}
}
}
```
## Additional Info
Based on #3756 which should be merged first.
* Add API endpoint to count statuses of all validators (#3756)
* Delete DB schema migrations for v11 and earlier (#3761)
Co-authored-by: Mac L <mjladson@pm.me>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Proposed Changes
Now that the Gnosis merge is scheduled, all users should have upgraded beyond Lighthouse v3.0.0. Accordingly we can delete schema migrations for versions prior to v3.0.0.
## Additional Info
I also deleted the state cache stuff I added in #3714 as it turned out to be useless for the light client proofs due to the one-slot offset.
## Issue Addressed
#3724
## Proposed Changes
Adds an endpoint to quickly count the number of occurances of each status in the validator set.
## Usage
```bash
curl -X GET "http://localhost:5052/lighthouse/ui/validator_count" -H "accept: application/json" | jq
```
```json
{
"data": {
"active_ongoing":479508,
"active_exiting":0,
"active_slashed":0,
"pending_initialized":28,
"pending_queued":0,
"withdrawal_possible":933,
"withdrawal_done":0,
"exited_unslashed":0,
"exited_slashed":3
}
}
```
## Issue Addressed
Closes https://github.com/sigp/lighthouse/issues/2327
## Proposed Changes
This is an extension of some ideas I implemented while working on `tree-states`:
- Cache the indexed attestations from blocks in the `ConsensusContext`. Previously we were re-computing them 3-4 times over.
- Clean up `import_block` by splitting each part into `import_block_XXX`.
- Move some stuff off hot paths, specifically:
- Relocate non-essential tasks that were running between receiving the payload verification status and priming the early attester cache. These tasks are moved after the cache priming:
- Attestation observation
- Validator monitor updates
- Slasher updates
- Updating the shuffling cache
- Fork choice attestation observation now happens at the end of block verification in parallel with payload verification (this seems to save 5-10ms).
- Payload verification now happens _before_ advancing the pre-state and writing it to disk! States were previously being written eagerly and adding ~20-30ms in front of verifying the execution payload. State catchup also sometimes takes ~500ms if we get a cache miss and need to rebuild the tree hash cache.
The remaining task that's taking substantial time (~20ms) is importing the block to fork choice. I _think_ this is because of pull-tips, and we should be able to optimise it out with a clever total active balance cache in the state (which would be computed in parallel with payload verification). I've decided to leave that for future work though. For now it can be observed via the new `beacon_block_processing_post_exec_pre_attestable_seconds` metric.
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
our bootnodes as of now support only ipv4. this makes it so that they support ipv6
## Proposed Changes
- Adds code necessary to update the bootnodes to run on dual stack nodes and therefore contact and store ipv6 nodes.
- Adds some metrics about connectivity type of stored peers. It might have been nice to see some metrics over the sessions but that feels out of scope right now.
## Additional Info
- some code quality improvements sneaked in since the changes seemed small
- I think it depends on the OS, but enabling mapped addresses on an ipv6 node without dual stack support enabled could fail silently, making these nodes effectively ipv6 only. In the future I'll probably change this to use two sockets, which should fail loudly
## Issue Addressed
#3704
## Proposed Changes
Adds is_syncing_finalized: bool parameter for block verification functions. Sets the payload_verification_status to Optimistic if is_syncing_finalized is true. Uses SyncState in NetworkGlobals in BeaconProcessor to retrieve the syncing status.
## Additional Info
I could implement FinalizedSignatureVerifiedBlock if you think it would be nicer.
## Issue Addressed
NA
## Proposed Changes
This PR sets out to improve the logging/metrics experience when interacting with the builder. Namely, it:
- Adds/changes metrics (see "Metrics Changes" section).
- Adds new logs which show the duration of requests to the builder/local EL.
- Refactors existing logs for consistency and so that the `parent_hash` is include in all relevant logs (we can grep for this field when trying to trace the flow of block production).
Additionally, when I was implementing this PR I noticed that we skip some verification of the builder payload in the scenario where the builder return `Ok` but the local EL returns with `Err`. Namely, we were skipping the bid signature and other values like parent hash and prev randao. In this PR I've changed it so we *always* check these values and reject the bid if they're incorrect. With these changes, we'll sometimes choose to skip a proposal rather than propose something invalid -- that's the only side-effect to the changes that I can see.
## Metrics Changes
- Changed: `execution_layer_request_times`:
- `method = "get_blinded_payload_local"`: time taken to get a payload from a local EE.
- `method = "get_blinded_payload_builder"`: time taken to get a blinded payload from a builder.
- `method = "post_blinded_payload_builder"`: time taken to get a builder to reveal a payload they've previously supplied us.
- `execution_layer_get_payload_outcome`
- `outcome = "success"`: we successfully produced a payload from a builder or local EE.
- `outcome = "failure"`: we were unable to get a payload from a builder or local EE.
- New: `execution_layer_builder_reveal_payload_outcome`
- `outcome = "success"`: a builder revealed a payload from a signed, blinded block.
- `outcome = "failure"`: the builder did not reveal the payload.
- New: `execution_layer_get_payload_source`
- `type = "builder"`: we used a payload from a builder to produce a block.
- `type = "local"`: we used a payload from a local EE to produce a block.
- New: `execution_layer_get_payload_builder_rejections` has a `reason` field to describe why we rejected a payload from a builder.
- New: `execution_layer_payload_bids` tracks the bid (in gwei) from the builder or local EE (local EE not yet supported, waiting on EEs to expose the value). Can only record values that fit inside an i64 (roughly 9 million ETH).
## Additional Info
NA
## Issue Addressed
#3723
## Proposed Changes
Adds a new CLI flag `--gui` which enables all the various flags required for the gui to function properly.
Currently enables the `--http` and `--validator-monitor-auto` flags.
## Issue Addressed
Partially addresses #3651
## Proposed Changes
Adds server-side support for light_client_bootstrap_v1 topic
## Additional Info
This PR, creates each time a bootstrap without using cache, I do not know how necessary a cache is in this case as this topic is not supposed to be called frequently and IMHO we can just prevent abuse by using the limiter, but let me know what you think or if there is any caveat to this, or if it is necessary only for the sake of good practice.
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
