## Issue Addressed
Addresses #4778, and potentially fixes the flaky deneb builder test `builder_works_post_deneb`.
The [deneb builder test](c5c84f1213/beacon_node/http_api/tests/tests.rs (L5371)) has been quite flaky on our CI (`release-tests`) since it was introduced. I'm guessing that it might be timing out on the builder `get_header` call (1 second), and therefore the local payload is used, while the test expects builder payload to be used.
On my machine the [`get_header` ](c5c84f1213/beacon_node/execution_layer/src/test_utils/mock_builder.rs (L367)) call takes about 550ms, which could easily go over 1s on slower environments (our windows CI runner is much slower than the ubuntu one).
I did a profile on the test and it showed that `blob_to_kzg_commiment` and `compute_kzg_proof` was taking a large chunk of time, so perhaps pre-generating the blobs could help stablise this test.
## Proposed Changes
Pre-generate blobs bundle for Mainnet and Minimal presets.
Before the change `get_header` took about **550ms**, and it's now reduced to **50-55ms** after the change. If timeout was indeed the cause of the flaky test, this fix should stablise it. This also brings the flaky `builder_works_post_deneb` test time from 50s to 10s. (8s if we only use a single blob)
* Add `blob_sidecar` event to SSE.
* Return 202 if a block is published but failed blob validation when validation level is `Gossip`.
* Move `BlobSidecar` event to `process_gossip_blob` and add test.
* Emit `BlobSidecar` event when blobs are received over rpc.
* Improve test assertions on `SseBlobSidecar`s.
* Add quotes to blob index serialization in `SseBlobSidecar`
Co-authored-by: realbigsean <seananderson33@GMAIL.com>
---------
Co-authored-by: realbigsean <seananderson33@GMAIL.com>
Attempting to improve our CI speeds as its recently been a pain point.
Major changes:
- Use a github action to pull stable/nightly rust rather than building it each run
- Shift test suite to `nexttest` https://github.com/nextest-rs/nextest for CI
UPDATE:
So I've iterated on some changes, and although I think its still not optimal I think this is a good base to start from. Some extra things in this PR:
- Shifted where we pull rust from. We're now using this thing: https://github.com/moonrepo/setup-rust . It's got some interesting cache's built in, but was not seeing the gains that Jimmy managed to get. In either case tho, it can pull rust, cargofmt, clippy, cargo nexttest all in < 5s. So I think it's worthwhile.
- I've grouped a few of the check-like tests into a single test called `code-test`. Although we were using github runners in parallel which may be faster, it just seems wasteful. There were like 4-5 tests, where we would pull lighthouse, compile it, then run an action, like clippy, cargo-audit or fmt. I've grouped these into a single action, so we only compile lighthouse once, then in each step we run the checks. This avoids compiling lighthouse like 5 times.
- Ive made doppelganger tests run on our local machines to avoid pulling foundry, building and making lcli which are all now baked into the images.
- We have sccache and do not incremental compile lighthouse
Misc bonus things:
- Cargo update
- Fix web3 signer openssl keys which is required after a cargo update
- Use mock_instant in an LRU cache test to avoid non-deterministic test
- Remove race condition in building web3signer tests
There's still some things we could improve on. Such as downloading the EF tests every run and the web3-signer binary, but I've left these to be out of scope of this PR. I think the above are meaningful improvements.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: antondlr <anton@delaruelle.net>
* Start testing blob pruning
* Get rid of unnecessary orphaned blob column
* Make random blob tests deterministic
* Test for pruning being blocked by finality
* Fix bugs and test fork boundary
* A few more tweaks to pruning conditions
* Tweak oldest_blob_slot semantics
* Test margin pruning
* Clean up some terminology and lints
* Schema migrations for v18
* Remove FIXME
* Prune blobs on finalization not every slot
* Fix more bugs + tests
* Address review comments
## Issue Addressed
Synchronize dependencies and edition on the workspace `Cargo.toml`
## Proposed Changes
with https://github.com/rust-lang/cargo/issues/8415 merged it's now possible to synchronize details on the workspace `Cargo.toml` like the metadata and dependencies.
By only having dependencies that are shared between multiple crates aligned on the workspace `Cargo.toml` it's easier to not miss duplicate versions of the same dependency and therefore ease on the compile times.
## Additional Info
this PR also removes the no longer required direct dependency of the `serde_derive` crate.
should be reviewed after https://github.com/sigp/lighthouse/pull/4639 get's merged.
closes https://github.com/sigp/lighthouse/issues/4651
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Michael Sproul <micsproul@gmail.com>
## Issue Addressed
#4635
## Proposed Changes
Wrap the `SignedVoluntaryExit` object in a `GenericResponse` container, adding an additional `data` layer, to ensure compliance with the key manager API specification.
The new response would look like this:
```json
{"data":{"message":{"epoch":"196868","validator_index":"505597"},"signature":"0xhexsig"}}
```
This is a backward incompatible change and will affect Siren as well.
## Issue Addressed
#4531
## Proposed Changes
add SSZ support to the following block production endpoints:
GET /eth/v2/validator/blocks/{slot}
GET /eth/v1/validator/blinded_blocks/{slot}
## Additional Info
i updated a few existing tests to use ssz instead of writing completely new tests
## Issue Addressed
#4738
## Proposed Changes
See the above issue for details. Went with option #2 to use the async reqwest client in `Eth2NetworkConfig` and propagate the async-ness.
* Implement `SignedBlockContent` decoding and fixed bug in `SignedBlockContent::new`
* Update Cargo.lock file
* Use `make_genesis_spec` to simplify test setup.
* Fix syntax errors.
* Update comments and small cleanup.
* Deserialize into `SsePayloadAttributesV3` for Deneb fork. Update `SignedBlockContents::blobs_cloned` to return blobs for `BlindedBlockAndBlobSidecars`.
* Improve code readability and error handling when converting blinded block into full block.
## Proposed Changes
New release to replace the cancelled v4.4.0 release.
This release includes the bugfix #4687 which avoids a deadlock that was present in v4.4.0.
## Additional Info
Awaiting testing over the weekend this will be merged Monday September 4th.
## Issue Addressed
N/A
## Proposed Changes
Adds the Chiado (Gnosis testnet) network to the builtin one.
## Additional Info
It's a fairly trivial change all things considered as the preset already exists, so shouldn't be hard to maintain.
It compiles and seems to work, but I'm sure I missed something?
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
Add the Holesky network config as per 36e4ff2d51/custom_config_data.
Since the genesis state is ~190MB, I've opted to *not* include it in the binary and instead download it at runtime (see #4564 for context). To download this file we have:
- A hard-coded URL for a SigP-hosted S3 bucket with the Holesky genesis state. Assuming this download works correctly, users will be none the wiser that the state wasn't included in the binary (apart from some additional logs)
- If the user provides a `--checkpoint-sync-url` flag, then LH will download the genesis state from that server rather than our S3 bucket.
- If the user provides a `--genesis-state-url` flag, then LH will download the genesis state from that server regardless of the S3 bucket or `--checkpoint-sync-url` flag.
- Whenever a genesis state is downloaded it is checked against a checksum baked into the binary.
- A genesis state will never be downloaded if it's already included in the binary.
- There is a `--genesis-state-url-timeout` flag to tweak the timeout for downloading the genesis state file.
## Log Output
Example of log output when a state is downloaded:
```bash
Aug 23 05:40:13.424 INFO Logging to file path: "/Users/paul/.lighthouse/holesky/beacon/logs/beacon.log"
Aug 23 05:40:13.425 INFO Lighthouse started version: Lighthouse/v4.3.0-bd9931f+
Aug 23 05:40:13.425 INFO Configured for network name: holesky
Aug 23 05:40:13.426 INFO Data directory initialised datadir: /Users/paul/.lighthouse/holesky
Aug 23 05:40:13.427 INFO Deposit contract address: 0x4242424242424242424242424242424242424242, deploy_block: 0
Aug 23 05:40:13.427 INFO Downloading genesis state info: this may take some time on testnets with large validator counts, timeout: 60s, server: https://sigp-public-genesis-states.s3.ap-southeast-2.amazonaws.com/
Aug 23 05:40:29.895 INFO Starting from known genesis state service: beacon
```
Example of log output when there are no URLs specified:
```
Aug 23 06:29:51.645 INFO Logging to file path: "/Users/paul/.lighthouse/goerli/beacon/logs/beacon.log"
Aug 23 06:29:51.646 INFO Lighthouse started version: Lighthouse/v4.3.0-666a39c+
Aug 23 06:29:51.646 INFO Configured for network name: goerli
Aug 23 06:29:51.647 INFO Data directory initialised datadir: /Users/paul/.lighthouse/goerli
Aug 23 06:29:51.647 INFO Deposit contract address: 0xff50ed3d0ec03ac01d4c79aad74928bff48a7b2b, deploy_block: 4367322
The genesis state is not present in the binary and there are no known download URLs. Please use --checkpoint-sync-url or --genesis-state-url.
```
## Additional Info
I tested the `--genesis-state-url` flag with all 9 Goerli checkpoint sync servers on https://eth-clients.github.io/checkpoint-sync-endpoints/ and they all worked 🎉
My IDE eagerly formatted some `Cargo.toml`. I've disabled it but I don't see the value in spending time reverting the changes that are already there.
I also added the `GenesisStateBytes` enum to avoid an unnecessary clone on the genesis state bytes baked into the binary. This is not a huge deal on Mainnet, but will become more relevant when testing with big genesis states.
When we do a fresh checkpoint sync we're downloading the genesis state to check the `genesis_validators_root` against the finalised state we receive. This is not *entirely* pointless, since we verify the checksum when we download the genesis state so we are actually guaranteeing that the finalised state is on the same network. There might be a smarter/less-download-y way to go about this, but I've run out of cycles to figure that out. Perhaps we can grab it in the next release?
## Issue Addressed
Closes#4473 (take 3)
## Proposed Changes
- Send a 202 status code by default for duplicate blocks, instead of 400. This conveys to the caller that the block was published, but makes no guarantees about its validity. Block relays can count this as a success or a failure as they wish.
- For users wanting finer-grained control over which status is returned for duplicates, a flag `--http-duplicate-block-status` can be used to adjust the behaviour. A 400 status can be supplied to restore the old (spec-compliant) behaviour, or a 200 status can be used to silence VCs that warn loudly for non-200 codes (e.g. Lighthouse prior to v4.4.0).
- Update the Lighthouse VC to gracefully handle success codes other than 200. The info message isn't the nicest thing to read, but it covers all bases and isn't a nasty `ERRO`/`CRIT` that will wake anyone up.
## Additional Info
I'm planning to raise a PR to `beacon-APIs` to specify that clients may return 202 for duplicate blocks. Really it would be nice to use some 2xx code that _isn't_ the same as the code for "published but invalid". I think unfortunately there aren't any suitable codes, and maybe the best fit is `409 CONFLICT`. Given that we need to fix this promptly for our release, I think using the 202 code temporarily with configuration strikes a nice compromise.
## Issue Addressed
updates underlying dependencies and removes the ignored `RUSTSEC`'s for `cargo audit`.
Also switches `procinfo` to `procfs` on `eth2` to remove the `nom` warning, `procinfo` is unmaintained see [here](https://github.com/danburkert/procinfo-rs/issues/46).
* remove protoc and token from network tests github action
* delete unused beacon chain methods
* downgrade writing blobs to store log
* reduce diff in block import logic
* remove some todo's and deneb built in network
* remove unnecessary error, actually use some added metrics
* remove some metrics, fix missing components on publish funcitonality
* fix status tests
* rename sidecar by root to blobs by root
* clean up some metrics
* remove unnecessary feature gate from attestation subnet tests, clean up blobs by range response code
* pawan's suggestion in `protocol_info`, peer score in matching up batch sync block and blobs
* fix range tests for deneb
* pub block and blob db cache behind the same mutex
* remove unused errs and an empty file
* move sidecar trait to new file
* move types from payload to eth2 crate
* update comment and add flag value name
* make function private again, remove allow unused
* use reth rlp for tx decoding
* fix compile after merge
* rename kzg commitments
* cargo fmt
* remove unused dep
* Update beacon_node/execution_layer/src/lib.rs
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
* Update beacon_node/beacon_processor/src/lib.rs
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
* pawan's suggestiong for vec capacity
* cargo fmt
* Revert "use reth rlp for tx decoding"
This reverts commit 5181837d81c66dcca4c960a85989ac30c7f806e2.
* remove reth rlp
---------
Co-authored-by: Pawan Dhananjay <pawandhananjay@gmail.com>
* Update mock builder, mev-rs dependencies, eth2 lib to support deneb builder flow
* Replace `sharingForkTime` with `cancunTime`
* Patch `ethereum-consensus` to include some deneb-devnet-8 changes
* Add deneb builder test and fix block contents deserialization
* Fix builder bid encoding issue and passing deneb builder test \o/
* Fix test compilation
* Revert `cancunTime` change in genesis to pass doppelganger tests
## Issue Addressed
Addresses #2557
## Proposed Changes
Adds the `lighthouse validator-manager` command, which provides:
- `lighthouse validator-manager create`
- Creates a `validators.json` file and a `deposits.json` (same format as https://github.com/ethereum/staking-deposit-cli)
- `lighthouse validator-manager import`
- Imports validators from a `validators.json` file to the VC via the HTTP API.
- `lighthouse validator-manager move`
- Moves validators from one VC to the other, utilizing only the VC API.
## Additional Info
In 98bcb947c I've reduced some VC `ERRO` and `CRIT` warnings to `WARN` or `DEBG` for the case where a pubkey is missing from the validator store. These were being triggered when we removed a validator but still had it in caches. It seems to me that `UnknownPubkey` will only happen in the case where we've removed a validator, so downgrading the logs is prudent. All the logs are `DEBG` apart from attestations and blocks which are `WARN`. I thought having *some* logging about this condition might help us down the track.
In 856cd7e37d I've made the VC delete the corresponding password file when it's deleting a keystore. This seemed like nice hygiene. Notably, it'll only delete that password file after it scans the validator definitions and finds that no other validator is also using that password file.
* Low hanging fruits
* Remove unnecessary todo
I think it's fine to not handle this since the calling functions handle the error.
No specific reason imo to handle it in the function as well.
* Rename BlobError to GossipBlobError
I feel this signified better what the error is for. The BlobError was only for failures when gossip
verifying a blob. We cannot get this error when doing rpc validation
* Remove the BlockError::BlobValidation variant
This error was only there to appease gossip verification before publish.
It's unclear how to peer score this error since this cannot actually occur during any
block verification flows.
This commit introuduces an additional error type BlockContentsError to better represent the
Error type
* Add docs for peer scoring (or lack thereof) of AvailabilityCheck errors
* I do not see a non-convoluted way of doing this. Okay to have some redundant code here
* Removing this to catch the failure red handed
* Fix compilation
* Cannot be deleted because some tests assume the trait impl
Also useful to have around for testing in the future imo
* Add some metrics and logs
* Only process `Imported` variant in sync_methods
The only additional thing for other variants that might be useful is logging. We can do that
later if required
* Convert to TryFrom
Not really sure where this would be used, but just did what the comment says.
Could consider just returning the Block variant for a deneb block in the From version
* Unlikely to change now
* This is fine as this is max_rpc_size per rpc chunk (for blobs, it would be 128kb max)
* Log count instead of individual blobs, can delete log later if it becomes too annoying.
* Add block production blob verification timer
* Extend block_straemer test to deneb
* Remove dbg statement
* Fix tests
## Issue Addressed
Addresses [#4401](https://github.com/sigp/lighthouse/issues/4401)
## Proposed Changes
Shift some constants into ```ChainSpec``` and remove the constant values from code space.
## Additional Info
I mostly used ```MainnetEthSpec::default_spec()``` for getting ```ChainSpec```. I wonder Did I make a mistake about that.
Co-authored-by: armaganyildirak <armaganyildirak@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
Co-authored-by: Age Manning <Age@AgeManning.com>
Co-authored-by: Diva M <divma@protonmail.com>
## Issue Addressed
Upgrade libp2p to v0.52
## Proposed Changes
- **Workflows**: remove installation of `protoc`
- **Book**: remove installation of `protoc`
- **`Dockerfile`s and `cross`**: remove custom base `Dockerfile` for cross since it's no longer needed. Remove `protoc` from remaining `Dockerfiles`s
- **Upgrade `discv5` to `v0.3.1`:** we have some cool stuff in there: no longer needs `protoc` and faster ip updates on cold start
- **Upgrade `prometheus` to `0.21.0`**, now it no longer needs encoding checks
- **things that look like refactors:** bunch of api types were renamed and need to be accessed in a different (clearer) way
- **Lighthouse network**
- connection limits is now a behaviour
- banned peers no longer exist on the swarm level, but at the behaviour level
- `connection_event_buffer_size` now is handled per connection with a buffer size of 4
- `mplex` is deprecated and was removed
- rpc handler now logs the peer to which it belongs
## Additional Info
Tried to keep as much behaviour unchanged as possible. However, there is a great deal of improvements we can do _after_ this upgrade:
- Smart connection limits: Connection limits have been checked only based on numbers, we can now use information about the incoming peer to decide if we want it
- More powerful peer management: Dial attempts from other behaviours can be rejected early
- Incoming connections can be rejected early
- Banning can be returned exclusively to the peer management: We should not get connections to banned peers anymore making use of this
- TCP Nat updates: We might be able to take advantage of confirmed external addresses to check out tcp ports/ips
Co-authored-by: Age Manning <Age@AgeManning.com>
Co-authored-by: Akihito Nakano <sora.akatsuki@gmail.com>
* changed name
* Fix sidecars
* Added query type and parrameter
* added query struct and function
* added method
* improved filtering method
* added blob_sidecar_list_indexed to block_id
* minor blobqueryindex fix
* function and formatting fix
* minor function and naming fix
* minor changes
