## Issue Addressed
N/A
## Proposed Changes
Add a HTTP API which can be used to compute the attestation performances of a validator (or all validators) over a discrete range of epochs.
Performances can be computed for a single validator, or for the global validator set.
## Usage
### Request
The API can be used as follows:
```
curl "http://localhost:5052/lighthouse/analysis/attestation_performance/{validator_index}?start_epoch=57730&end_epoch=57732"
```
Alternatively, to compute performances for the global validator set:
```
curl "http://localhost:5052/lighthouse/analysis/attestation_performance/global?start_epoch=57730&end_epoch=57732"
```
### Response
The response is JSON formatted as follows:
```
[
{
"index": 72,
"epochs": {
"57730": {
"active": true,
"head": false,
"target": false,
"source": false
},
"57731": {
"active": true,
"head": true,
"target": true,
"source": true,
"delay": 1
},
"57732": {
"active": true,
"head": true,
"target": true,
"source": true,
"delay": 1
},
}
}
]
```
> Note that the `"epochs"` are not guaranteed to be in ascending order.
## Additional Info
- This API is intended to be used in our upcoming validator analysis tooling (#2873) and will likely not be very useful for regular users. Some advanced users or block explorers may find this API useful however.
- The request range is limited to 100 epochs (since the range is inclusive and it also computes the `end_epoch` it's actually 101 epochs) to prevent Lighthouse using exceptionally large amounts of memory.
## Issues Addressed
Closes#2739Closes#2812
## Proposed Changes
Support the deserialization of query strings containing duplicate keys into their corresponding types.
As `warp` does not support this feature natively (as discussed in #2739), it relies on the external library [`serde_array_query`](https://github.com/sigp/serde_array_query) (written by @michaelsproul)
This is backwards compatible meaning that both of the following requests will produce the same output:
```
curl "http://localhost:5052/eth/v1/events?topics=head,block"
```
```
curl "http://localhost:5052/eth/v1/events?topics=head&topics=block"
```
## Additional Info
Certain error messages have changed slightly. This only affects endpoints which accept multiple values.
For example:
```
{"code":400,"message":"BAD_REQUEST: invalid query: Invalid query string","stacktraces":[]}
```
is now
```
{"code":400,"message":"BAD_REQUEST: unable to parse query","stacktraces":[]}
```
The serve order of the endpoints `get_beacon_state_validators` and `get_beacon_state_validators_id` have flipped:
```rust
.or(get_beacon_state_validators_id.boxed())
.or(get_beacon_state_validators.boxed())
```
This is to ensure proper error messages when filter fallback occurs due to the use of the `and_then` filter.
## Future Work
- Cleanup / remove filter fallback behaviour by substituting `and_then` with `then` where appropriate.
- Add regression tests for HTTP API error messages.
## Credits
- @mooori for doing the ground work of investigating possible solutions within the existing Rust ecosystem.
- @michaelsproul for writing [`serde_array_query`](https://github.com/sigp/serde_array_query) and for helping debug the behaviour of the `warp` filter fallback leading to incorrect error messages.
## Issue Addressed
New rust lints
## Proposed Changes
- Boxing some enum variants
- removing some unused fields (is the validator lockfile unused? seemed so to me)
## Additional Info
- some error fields were marked as dead code but are logged out in areas
- left some dead fields in our ef test code because I assume they are useful for debugging?
Co-authored-by: realbigsean <seananderson33@gmail.com>
* Add payload verification status to fork choice
* Pass payload verification status to import_block
* Add valid back-propagation
* Add head safety status latch to API
* Remove ExecutionLayerStatus
* Add execution info to client notifier
* Update notifier logs
* Change use of "hash" to refer to beacon block
* Shutdown on invalid finalized block
* Tidy, add comments
* Fix failing FC tests
* Allow blocks with unsafe head
* Fix forkchoiceUpdate call on startup
* Reject some HTTP endpoints when EL is not ready
* Restrict more endpoints
* Add watchdog task
* Change scheduling
* Update to new schedule
* Add "syncing" concept
* Remove RequireSynced
* Add is_merge_complete to head_info
* Cache latest_head in Engines
* Call consensus_forkchoiceUpdate on startup
* Thread eth1_block_hash into interop genesis state
* Add merge-fork-epoch flag
* Build LH with minimal spec by default
* Add verbose logs to execution_layer
* Add --http-allow-sync-stalled flag
* Update lcli new-testnet to create genesis state
* Fix http test
* Fix compile errors in tests
## Issue Addressed
Part of a bigger effort to make the network globals read only. This moves all writes to the `PeerDB` to the `eth2_libp2p` crate. Limiting writes to the peer manager is a slightly more complicated issue for a next PR, to keep things reviewable.
## Proposed Changes
- Make the peers field in the globals a private field.
- Allow mutable access to the peers field to `eth2_libp2p` for now.
- Add a new network message to update the sync state.
Co-authored-by: Age Manning <Age@AgeManning.com>
This simply moves some functions that were "swarm notifications" to a network behaviour implementation.
Notes
------
- We could disconnect from the peer manager but we would lose the rpc shutdown message
- We still notify from the swarm since this is the most reliable way to get some events. Ugly but best for now
- Events need to be pushed with "add event" to wake the waker
Co-authored-by: Divma <26765164+divagant-martian@users.noreply.github.com>
## Issue Addressed
I've done this change in a couple of WIPs already so I might as well submit it on its own. This changes no functionality but reduces coupling in a 0.0001%. It also helps new people who need to work in the peer manager to better understand what it actually needs from the outside
## Proposed Changes
Add a config to the peer manager
## Proposed Changes
* Add the `Eth-Consensus-Version` header to the HTTP API for the block and state endpoints. This is part of the v2.1.0 API that was recently released: https://github.com/ethereum/beacon-APIs/pull/170
* Add tests for the above. I refactored the `eth2` crate's helper functions to make this more straight-forward, and introduced some new mixin traits that I think greatly improve readability and flexibility.
* Add a new `map_with_fork!` macro which is useful for decoding a superstruct type without naming all its variants. It is now used for SSZ-decoding `BeaconBlock` and `BeaconState`, and for JSON-decoding `SignedBeaconBlock` in the API.
## Additional Info
The `map_with_fork!` changes will conflict with the Merge changes, but when resolving the conflict the changes from this branch should be preferred (it is no longer necessary to enumerate every fork). The merge fork _will_ need to be added to `map_fork_name_with`.
## Description
The `eth2_libp2p` crate was originally named and designed to incorporate a simple libp2p integration into lighthouse. Since its origins the crates purpose has expanded dramatically. It now houses a lot more sophistication that is specific to lighthouse and no longer just a libp2p integration.
As of this writing it currently houses the following high-level lighthouse-specific logic:
- Lighthouse's implementation of the eth2 RPC protocol and specific encodings/decodings
- Integration and handling of ENRs with respect to libp2p and eth2
- Lighthouse's discovery logic, its integration with discv5 and logic about searching and handling peers.
- Lighthouse's peer manager - This is a large module handling various aspects of Lighthouse's network, such as peer scoring, handling pings and metadata, connection maintenance and recording, etc.
- Lighthouse's peer database - This is a collection of information stored for each individual peer which is specific to lighthouse. We store connection state, sync state, last seen ips and scores etc. The data stored for each peer is designed for various elements of the lighthouse code base such as syncing and the http api.
- Gossipsub scoring - This stores a collection of gossipsub 1.1 scoring mechanisms that are continuously analyssed and updated based on the ethereum 2 networks and how Lighthouse performs on these networks.
- Lighthouse specific types for managing gossipsub topics, sync status and ENR fields
- Lighthouse's network HTTP API metrics - A collection of metrics for lighthouse network monitoring
- Lighthouse's custom configuration of all networking protocols, RPC, gossipsub, discovery, identify and libp2p.
Therefore it makes sense to rename the crate to be more akin to its current purposes, simply that it manages the majority of Lighthouse's network stack. This PR renames this crate to `lighthouse_network`
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
NA
## Proposed Changes
This PR is near-identical to https://github.com/sigp/lighthouse/pull/2652, however it is to be merged into `unstable` instead of `merge-f2f`. Please see that PR for reasoning.
I'm making this duplicate PR to merge to `unstable` in an effort to shrink the diff between `unstable` and `merge-f2f` by doing smaller, lead-up PRs.
## Additional Info
NA
Currently, the beacon node has no ability to serve the HTTP API over TLS.
Adding this functionality would be helpful for certain use cases, such as when you need a validator client to connect to a backup beacon node which is outside your local network, and the use of an SSH tunnel or reverse proxy would be inappropriate.
## Proposed Changes
- Add three new CLI flags to the beacon node
- `--http-enable-tls`: enables TLS
- `--http-tls-cert`: to specify the path to the certificate file
- `--http-tls-key`: to specify the path to the key file
- Update the HTTP API to optionally use `warp`'s [`TlsServer`](https://docs.rs/warp/0.3.1/warp/struct.TlsServer.html) depending on the presence of the `--http-enable-tls` flag
- Update tests and docs
- Use a custom branch for `warp` to ensure proper error handling
## Additional Info
Serving the API over TLS should currently be considered experimental. The reason for this is that it uses code from an [unmerged PR](https://github.com/seanmonstar/warp/pull/717). This commit provides the `try_bind_with_graceful_shutdown` method to `warp`, which is helpful for controlling error flow when the TLS configuration is invalid (cert/key files don't exist, incorrect permissions, etc).
I've implemented the same code in my [branch here](https://github.com/macladson/warp/tree/tls).
Once the code has been reviewed and merged upstream into `warp`, we can remove the dependency on my branch and the feature can be considered more stable.
Currently, the private key file must not be password-protected in order to be read into Lighthouse.
## Proposed Changes
This is a refactor of the PeerDB and PeerManager. A number of bugs have been surfacing around the connection state of peers and their interaction with the score state.
This refactor tightens the mutability properties of peers such that only specific modules are able to modify the state of peer information preventing inadvertant state changes that can lead to our local peer manager db being out of sync with libp2p.
Further, the logic around connection and scoring was quite convoluted and the distinction between the PeerManager and Peerdb was not well defined. Although these issues are not fully resolved, this PR is step to cleaning up this logic. The peerdb solely manages most mutability operations of peers leaving high-order logic to the peer manager.
A single `update_connection_state()` function has been added to the peer-db making it solely responsible for modifying the peer's connection state. The way the peer's scores can be modified have been reduced to three simple functions (`update_scores()`, `update_gossipsub_scores()` and `report_peer()`). This prevents any add-hoc modifications of scores and only natural processes of score modification is allowed which simplifies the reasoning of score and state changes.
## Issue Addressed
Resolves#2563
Replacement for #2653 as I'm not able to reopen that PR after force pushing.
## Proposed Changes
Fixes all broken api links. Cherry picked changes in #2590 and updated a few more links.
Co-authored-by: Mason Stallmo <masonstallmo@gmail.com>
## Issue Addressed
This PR addresses issue #2657
## Proposed Changes
Changes `/eth/v1/config/deposit_contract` endpoint to return the chain ID from the loaded chain spec instead of eth1::DEFAULT_NETWORK_ID which is the Goerli chain ID of 5.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Closes#2528
## Proposed Changes
- Add `BlockTimesCache` to provide block timing information to `BeaconChain`. This allows additional metrics to be calculated for blocks that are set as head too late.
- Thread the `seen_timestamp` of blocks received from RPC responses (except blocks from syncing) through to the sync manager, similar to what is done for blocks from gossip.
## Additional Info
This provides the following additional metrics:
- `BEACON_BLOCK_OBSERVED_SLOT_START_DELAY_TIME`
- The delay between the start of the slot and when the block was first observed.
- `BEACON_BLOCK_IMPORTED_OBSERVED_DELAY_TIME`
- The delay between when the block was first observed and when the block was imported.
- `BEACON_BLOCK_HEAD_IMPORTED_DELAY_TIME`
- The delay between when the block was imported and when the block was set as head.
The metric `BEACON_BLOCK_IMPORTED_SLOT_START_DELAY_TIME` was removed.
A log is produced when a block is set as head too late, e.g.:
```
Aug 27 03:46:39.006 DEBG Delayed head block set_as_head_delay: Some(21.731066ms), imported_delay: Some(119.929934ms), observed_delay: Some(3.864596988s), block_delay: 4.006257988s, slot: 1931331, proposer_index: 24294, block_root: 0x937602c89d3143afa89088a44bdf4b4d0d760dad082abacb229495c048648a9e, service: beacon
```
## Issue Addressed
NA
## Proposed Changes
Implements the "union" type from the SSZ spec for `ssz`, `ssz_derive`, `tree_hash` and `tree_hash_derive` so it may be derived for `enums`:
https://github.com/ethereum/consensus-specs/blob/v1.1.0-beta.3/ssz/simple-serialize.md#union
The union type is required for the merge, since the `Transaction` type is defined as a single-variant union `Union[OpaqueTransaction]`.
### Crate Updates
This PR will (hopefully) cause CI to publish new versions for the following crates:
- `eth2_ssz_derive`: `0.2.1` -> `0.3.0`
- `eth2_ssz`: `0.3.0` -> `0.4.0`
- `eth2_ssz_types`: `0.2.0` -> `0.2.1`
- `tree_hash`: `0.3.0` -> `0.4.0`
- `tree_hash_derive`: `0.3.0` -> `0.4.0`
These these crates depend on each other, I've had to add a workspace-level `[patch]` for these crates. A follow-up PR will need to remove this patch, ones the new versions are published.
### Union Behaviors
We already had SSZ `Encode` and `TreeHash` derive for enums, however it just did a "transparent" pass-through of the inner value. Since the "union" decoding from the spec is in conflict with the transparent method, I've required that all `enum` have exactly one of the following enum-level attributes:
#### SSZ
- `#[ssz(enum_behaviour = "union")]`
- matches the spec used for the merge
- `#[ssz(enum_behaviour = "transparent")]`
- maintains existing functionality
- not supported for `Decode` (never was)
#### TreeHash
- `#[tree_hash(enum_behaviour = "union")]`
- matches the spec used for the merge
- `#[tree_hash(enum_behaviour = "transparent")]`
- maintains existing functionality
This means that we can maintain the existing transparent behaviour, but all existing users will get a compile-time error until they explicitly opt-in to being transparent.
### Legacy Option Encoding
Before this PR, we already had a union-esque encoding for `Option<T>`. However, this was with the *old* SSZ spec where the union selector was 4 bytes. During merge specification, the spec was changed to use 1 byte for the selector.
Whilst the 4-byte `Option` encoding was never used in the spec, we used it in our database. Writing a migrate script for all occurrences of `Option` in the database would be painful, especially since it's used in the `CommitteeCache`. To avoid the migrate script, I added a serde-esque `#[ssz(with = "module")]` field-level attribute to `ssz_derive` so that we can opt into the 4-byte encoding on a field-by-field basis.
The `ssz::legacy::four_byte_impl!` macro allows a one-liner to define the module required for the `#[ssz(with = "module")]` for some `Option<T> where T: Encode + Decode`.
Notably, **I have removed `Encode` and `Decode` impls for `Option`**. I've done this to force a break on downstream users. Like I mentioned, `Option` isn't used in the spec so I don't think it'll be *that* annoying. I think it's nicer than quietly having two different union implementations or quietly breaking the existing `Option` impl.
### Crate Publish Ordering
I've modified the order in which CI publishes crates to ensure that we don't publish a crate without ensuring we already published a crate that it depends upon.
## TODO
- [ ] Queue a follow-up `[patch]`-removing PR.
## Issue Addressed
NA
## Proposed Changes
Adds the ability to verify batches of aggregated/unaggregated attestations from the network.
When the `BeaconProcessor` finds there are messages in the aggregated or unaggregated attestation queues, it will first check the length of the queue:
- `== 1` verify the attestation individually.
- `>= 2` take up to 64 of those attestations and verify them in a batch.
Notably, we only perform batch verification if the queue has a backlog. We don't apply any artificial delays to attestations to try and force them into batches.
### Batching Details
To assist with implementing batches we modify `beacon_chain::attestation_verification` to have two distinct categories for attestations:
- *Indexed* attestations: those which have passed initial validation and were valid enough for us to derive an `IndexedAttestation`.
- *Verified* attestations: those attestations which were indexed *and also* passed signature verification. These are well-formed, interesting messages which were signed by validators.
The batching functions accept `n` attestations and then return `n` attestation verification `Result`s, where those `Result`s can be any combination of `Ok` or `Err`. In other words, we attempt to verify as many attestations as possible and return specific per-attestation results so peer scores can be updated, if required.
When we batch verify attestations, we first try to map all those attestations to *indexed* attestations. If any of those attestations were able to be indexed, we then perform batch BLS verification on those indexed attestations. If the batch verification succeeds, we convert them into *verified* attestations, disabling individual signature checking. If the batch fails, we convert to verified attestations with individual signature checking enabled.
Ultimately, we optimistically try to do a batch verification of attestation signatures and fall-back to individual verification if it fails. This opens an attach vector for "poisoning" the attestations and causing us to waste a batch verification. I argue that peer scoring should do a good-enough job of defending against this and the typical-case gains massively outweigh the worst-case losses.
## Additional Info
Before this PR, attestation verification took the attestations by value (instead of by reference). It turns out that this was unnecessary and, in my opinion, resulted in some undesirable ergonomics (e.g., we had to pass the attestation back in the `Err` variant to avoid clones). In this PR I've modified attestation verification so that it now takes a reference.
I refactored the `beacon_chain/tests/attestation_verification.rs` tests so they use a builder-esque "tester" struct instead of a weird macro. It made it easier for me to test individual/batch with the same set of tests and I think it was a nice tidy-up. Notably, I did this last to try and make sure my new refactors to *actual* production code would pass under the existing test suite.
## Issue Addressed
Closes#1891Closes#1784
## Proposed Changes
Implement checkpoint sync for Lighthouse, enabling it to start from a weak subjectivity checkpoint.
## Additional Info
- [x] Return unavailable status for out-of-range blocks requested by peers (#2561)
- [x] Implement sync daemon for fetching historical blocks (#2561)
- [x] Verify chain hashes (either in `historical_blocks.rs` or the calling module)
- [x] Consistency check for initial block + state
- [x] Fetch the initial state and block from a beacon node HTTP endpoint
- [x] Don't crash fetching beacon states by slot from the API
- [x] Background service for state reconstruction, triggered by CLI flag or API call.
Considered out of scope for this PR:
- Drop the requirement to provide the `--checkpoint-block` (this would require some pretty heavy refactoring of block verification)
Co-authored-by: Diva M <divma@protonmail.com>
## Issue Addressed
Related to: #2259
Made an attempt at all the necessary updates here to publish the crates to crates.io. I incremented the minor versions on all the crates that have been previously published. We still might run into some issues as we try to publish because I'm not able to test this out but I think it's a good starting point.
## Proposed Changes
- Add description and license to `ssz_types` and `serde_util`
- rename `serde_util` to `eth2_serde_util`
- increment minor versions
- remove path dependencies
- remove patch dependencies
## Additional Info
Crates published:
- [x] `tree_hash` -- need to publish `tree_hash_derive` and `eth2_hashing` first
- [x] `eth2_ssz_types` -- need to publish `eth2_serde_util` first
- [x] `tree_hash_derive`
- [x] `eth2_ssz`
- [x] `eth2_ssz_derive`
- [x] `eth2_serde_util`
- [x] `eth2_hashing`
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
N/A
## Proposed Changes
Add functionality in the validator monitor to provide sync committee related metrics for monitored validators.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Resolves#2524
## Proposed Changes
- Return all known forks in the `/config/fork_schedule`, previously returned only the head of the chain's fork.
- Deleted the `StateId::head` method because it was only previously used in this endpoint.
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Which issue # does this PR address?
## Proposed Changes
- Add a counter metric to log when a block is received late from gossip.
- Also push a `DEBG` log for the above condition.
- Use Debug (`?`) instead of Display (`%`) for a bunch of logs in the beacon processor, so we don't have to deal with concatenated block roots.
- Add new ERRO and CRIT to HTTP API to alert users when they're publishing late blocks.
## Additional Info
NA
## Proposed Changes
* Consolidate Tokio versions: everything now uses the latest v1.10.0, no more `tokio-compat`.
* Many semver-compatible changes via `cargo update`. Notably this upgrades from the yanked v0.8.0 version of crossbeam-deque which is present in v1.5.0-rc.0
* Many semver incompatible upgrades via `cargo upgrades` and `cargo upgrade --workspace pkg_name`. Notable ommissions:
- Prometheus, to be handled separately: https://github.com/sigp/lighthouse/issues/2485
- `rand`, `rand_xorshift`: the libsecp256k1 package requires 0.7.x, so we'll stick with that for now
- `ethereum-types` is pinned at 0.11.0 because that's what `web3` is using and it seems nice to have just a single version
## Additional Info
We still have two versions of `libp2p-core` due to `discv5` depending on the v0.29.0 release rather than `master`. AFAIK it should be OK to release in this state (cc @AgeManning )
## Proposed Changes
* Implement the validator client and HTTP API changes necessary to support Altair
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
Resolves#2069
## Proposed Changes
- Adds a `--doppelganger-detection` flag
- Adds a `lighthouse/seen_validators` endpoint, which will make it so the lighthouse VC is not interopable with other client beacon nodes if the `--doppelganger-detection` flag is used, but hopefully this will become standardized. Relevant Eth2 API repo issue: https://github.com/ethereum/eth2.0-APIs/issues/64
- If the `--doppelganger-detection` flag is used, the VC will wait until the beacon node is synced, and then wait an additional 2 epochs. The reason for this is to make sure the beacon node is able to subscribe to the subnets our validators should be attesting on. I think an alternative would be to have the beacon node subscribe to all subnets for 2+ epochs on startup by default.
## Additional Info
I'd like to add tests and would appreciate feedback.
TODO: handle validators started via the API, potentially make this default behavior
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
N/A
## Proposed Changes
- Removing a bunch of unnecessary references
- Updated `Error::VariantError` to `Error::Variant`
- There were additional enum variant lints that I ignored, because I thought our variant names were fine
- removed `MonitoredValidator`'s `pubkey` field, because I couldn't find it used anywhere. It looks like we just use the string version of the pubkey (the `id` field) if there is no index
## Additional Info
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
NA
## Proposed Changes
This PR addresses two things:
1. Allows the `ValidatorMonitor` to work with Altair states.
1. Optimizes `altair::process_epoch` (see [code](https://github.com/paulhauner/lighthouse/blob/participation-cache/consensus/state_processing/src/per_epoch_processing/altair/participation_cache.rs) for description)
## Breaking Changes
The breaking changes in this PR revolve around one premise:
*After the Altair fork, it's not longer possible (given only a `BeaconState`) to identify if a validator had *any* attestation included during some epoch. The best we can do is see if that validator made the "timely" source/target/head flags.*
Whilst this seems annoying, it's not actually too bad. Finalization is based upon "timely target" attestations, so that's really the most important thing. Although there's *some* value in knowing if a validator had *any* attestation included, it's far more important to know about "timely target" participation, since this is what affects finality and justification.
For simplicity and consistency, I've also removed the ability to determine if *any* attestation was included from metrics and API endpoints. Now, all Altair and non-Altair states will simply report on the head/target attestations.
The following section details where we've removed fields and provides replacement values.
### Breaking Changes: Prometheus Metrics
Some participation metrics have been removed and replaced. Some were removed since they are no longer relevant to Altair (e.g., total attesting balance) and others replaced with gwei values instead of pre-computed values. This provides more flexibility at display-time (e.g., Grafana).
The following metrics were added as replacements:
- `beacon_participation_prev_epoch_head_attesting_gwei_total`
- `beacon_participation_prev_epoch_target_attesting_gwei_total`
- `beacon_participation_prev_epoch_source_attesting_gwei_total`
- `beacon_participation_prev_epoch_active_gwei_total`
The following metrics were removed:
- `beacon_participation_prev_epoch_attester`
- instead use `beacon_participation_prev_epoch_source_attesting_gwei_total / beacon_participation_prev_epoch_active_gwei_total`.
- `beacon_participation_prev_epoch_target_attester`
- instead use `beacon_participation_prev_epoch_target_attesting_gwei_total / beacon_participation_prev_epoch_active_gwei_total`.
- `beacon_participation_prev_epoch_head_attester`
- instead use `beacon_participation_prev_epoch_head_attesting_gwei_total / beacon_participation_prev_epoch_active_gwei_total`.
The `beacon_participation_prev_epoch_attester` endpoint has been removed. Users should instead use the pre-existing `beacon_participation_prev_epoch_target_attester`.
### Breaking Changes: HTTP API
The `/lighthouse/validator_inclusion/{epoch}/{validator_id}` endpoint loses the following fields:
- `current_epoch_attesting_gwei` (use `current_epoch_target_attesting_gwei` instead)
- `previous_epoch_attesting_gwei` (use `previous_epoch_target_attesting_gwei` instead)
The `/lighthouse/validator_inclusion/{epoch}/{validator_id}` endpoint lose the following fields:
- `is_current_epoch_attester` (use `is_current_epoch_target_attester` instead)
- `is_previous_epoch_attester` (use `is_previous_epoch_target_attester` instead)
- `is_active_in_current_epoch` becomes `is_active_unslashed_in_current_epoch`.
- `is_active_in_previous_epoch` becomes `is_active_unslashed_in_previous_epoch`.
## Additional Info
NA
## TODO
- [x] Deal with total balances
- [x] Update validator_inclusion API
- [ ] Ensure `beacon_participation_prev_epoch_target_attester` and `beacon_participation_prev_epoch_head_attester` work before Altair
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Proposed Changes
Remove the remaining Altair `FIXME`s from consensus land.
1. Implement tree hash caching for the participation lists. This required some light type manipulation, including removing the `TreeHash` bound from `CachedTreeHash` which was purely descriptive.
2. Plumb the proposer index through Altair attestation processing, to avoid calculating it for _every_ attestation (potentially 128ms on large networks). This duplicates some work from #2431, but with the aim of getting it in sooner, particularly for the Altair devnets.
3. Removes two FIXMEs related to `superstruct` and cloning, which are unlikely to be particularly detrimental and will be tracked here instead: https://github.com/sigp/superstruct/issues/5
## Issue Addressed
#635
## Proposed Changes
- Keep attestations that reference a block we have not seen for 30secs before being re processed
- If we do import the block before that time elapses, it is reprocessed in that moment
- The first time it fails, do nothing wrt to gossipsub propagation or peer downscoring. If after being re processed it fails, downscore with a `LowToleranceError` and ignore the message.
## Issue Addressed
Resolves#2313
## Proposed Changes
Provide `BeaconNodeHttpClient` with a dedicated `Timeouts` struct.
This will allow granular adjustment of the timeout duration for different calls made from the VC to the BN. These can either be a constant value, or as a ratio of the slot duration.
Improve timeout performance by using these adjusted timeout duration's only whenever a fallback endpoint is available.
Add a CLI flag called `use-long-timeouts` to revert to the old behavior.
## Additional Info
Additionally set the default `BeaconNodeHttpClient` timeouts to the be the slot duration of the network, rather than a constant 12 seconds. This will allow it to adjust to different network specifications.
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Proposed Changes
Implement the consensus changes necessary for the upcoming Altair hard fork.
## Additional Info
This is quite a heavy refactor, with pivotal types like the `BeaconState` and `BeaconBlock` changing from structs to enums. This ripples through the whole codebase with field accesses changing to methods, e.g. `state.slot` => `state.slot()`.
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
#2377
## Proposed Changes
Implement the same code used for block root lookups (from #2376) to state root lookups in order to improve performance and reduce associated memory spikes (e.g. from certain HTTP API requests).
## Additional Changes
- Tests using `rev_iter_state_roots` and `rev_iter_block_roots` have been refactored to use their `forwards` versions instead.
- The `rev_iter_state_roots` and `rev_iter_block_roots` functions are now unused and have been removed.
- The `state_at_slot` function has been changed to use the `forwards` iterator.
## Additional Info
- Some tests still need to be refactored to use their `forwards_iter` versions. These tests start their iteration from a specific beacon state and thus use the `rev_iter_state_roots_from` and `rev_iter_block_roots_from` functions. If they can be refactored, those functions can also be removed.
This updates some older dependencies to address a few cargo audit warnings.
The majority of warnings come from network dependencies which will be addressed in #2389.
This PR contains some minor dep updates that are not network related.
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
`make lint` failing on rust 1.53.0.
## Proposed Changes
1.53.0 updates
## Additional Info
I haven't figure out why yet, we were now hitting the recursion limit in a few crates. So I had to add `#![recursion_limit = "256"]` in a few places
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
Reverts #2345 in the interests of getting v1.4.0 out this week. Once we have released that, we can go back to testing this again.
## Additional Info
NA
## Issue Addressed
NA
## Primary Change
When investigating memory usage, I noticed that retrieving a block from an early slot (e.g., slot 900) would cause a sharp increase in the memory footprint (from 400mb to 800mb+) which seemed to be ever-lasting.
After some investigation, I found that the reverse iteration from the head back to that slot was the likely culprit. To counter this, I've switched the `BeaconChain::block_root_at_slot` to use the forwards iterator, instead of the reverse one.
I also noticed that the networking stack is using `BeaconChain::root_at_slot` to check if a peer is relevant (`check_peer_relevance`). Perhaps the steep, seemingly-random-but-consistent increases in memory usage are caused by the use of this function.
Using the forwards iterator with the HTTP API alleviated the sharp increases in memory usage. It also made the response much faster (before it felt like to took 1-2s, now it feels instant).
## Additional Changes
In the process I also noticed that we have two functions for getting block roots:
- `BeaconChain::block_root_at_slot`: returns `None` for a skip slot.
- `BeaconChain::root_at_slot`: returns the previous root for a skip slot.
I unified these two functions into `block_root_at_slot` and added the `WhenSlotSkipped` enum. Now, the caller must be explicit about the skip-slot behaviour when requesting a root.
Additionally, I replaced `vec![]` with `Vec::with_capacity` in `store::chunked_vector::range_query`. I stumbled across this whilst debugging and made this modification to see what effect it would have (not much). It seems like a decent change to keep around, but I'm not concerned either way.
Also, `BeaconChain::get_ancestor_block_root` is unused, so I got rid of it 🗑️.
## Additional Info
I haven't also done the same for state roots here. Whilst it's possible and a good idea, it's more work since the fwds iterators are presently block-roots-specific.
Whilst there's a few places a reverse iteration of state roots could be triggered (e.g., attestation production, HTTP API), they're no where near as common as the `check_peer_relevance` call. As such, I think we should get this PR merged first, then come back for the state root iters. I made an issue here https://github.com/sigp/lighthouse/issues/2377.
## Issue Addressed
The latest version of Rust has new clippy rules & the codebase isn't up to date with them.
## Proposed Changes
Small formatting changes that clippy tells me are functionally equivalent
## Issue Addressed
#2276
## Proposed Changes
Add the `SensitiveUrl` struct which wraps `Url` and implements custom `Display` and `Debug` traits to redact user secrets from being logged in eth1 endpoints, beacon node endpoints and metrics.
## Additional Info
This also includes a small rewrite of the eth1 crate to make requests using `Url` instead of `&str`.
Some error messages have also been changed to remove `Url` data.
## Issue Addressed
Resolves#2186
## Proposed Changes
404 for any block-related information on a slot that was skipped or orphaned
Affected endpoints:
- `/eth/v1/beacon/blocks/{block_id}`
- `/eth/v1/beacon/blocks/{block_id}/root`
- `/eth/v1/beacon/blocks/{block_id}/attestations`
- `/eth/v1/beacon/headers/{block_id}`
## Additional Info
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Closes#2052
## Proposed Changes
- Refactor the attester/proposer duties endpoints in the BN
- Performance improvements
- Fixes some potential inconsistencies with the dependent root fields.
- Removes `http_api::beacon_proposer_cache` and just uses the one on the `BeaconChain` instead.
- Move the code for the proposer/attester duties endpoints into separate files, for readability.
- Refactor the `DutiesService` in the VC
- Required to reduce the delay on broadcasting new blocks.
- Gets rid of the `ValidatorDuty` shim struct that came about when we adopted the standard API.
- Separate block/attestation duty tasks so that they don't block each other when one is slow.
- In the VC, use `PublicKeyBytes` to represent validators instead of `PublicKey`. `PublicKey` is a legit crypto object whilst `PublicKeyBytes` is just a byte-array, it's much faster to clone/hash `PublicKeyBytes` and this change has had a significant impact on runtimes.
- Unfortunately this has created lots of dust changes.
- In the BN, store `PublicKeyBytes` in the `beacon_proposer_cache` and allow access to them. The HTTP API always sends `PublicKeyBytes` over the wire and the conversion from `PublicKey` -> `PublickeyBytes` is non-trivial, especially when queries have 100s/1000s of validators (like Pyrmont).
- Add the `state_processing::state_advance` mod which dedups a lot of the "apply `n` skip slots to the state" code.
- This also fixes a bug with some functions which were failing to include a state root as per [this comment](072695284f/consensus/state_processing/src/state_advance.rs (L69-L74)). I couldn't find any instance of this bug that resulted in anything more severe than keying a shuffling cache by the wrong block root.
- Swap the VC block service to use `mpsc` from `tokio` instead of `futures`. This is consistent with the rest of the code base.
~~This PR *reduces* the size of the codebase 🎉~~ It *used* to reduce the size of the code base before I added more comments.
## Observations on Prymont
- Proposer duties times down from peaks of 450ms to consistent <1ms.
- Current epoch attester duties times down from >1s peaks to a consistent 20-30ms.
- Block production down from +600ms to 100-200ms.
## Additional Info
- ~~Blocked on #2241~~
- ~~Blocked on #2234~~
## TODO
- [x] ~~Refactor this into some smaller PRs?~~ Leaving this as-is for now.
- [x] Address `per_slot_processing` roots.
- [x] Investigate slow next epoch times. Not getting added to cache on block processing?
- [x] Consider [this](072695284f/beacon_node/store/src/hot_cold_store.rs (L811-L812)) in the scenario of replacing the state roots
Co-authored-by: pawan <pawandhananjay@gmail.com>
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
## Issue Addressed
NA
## Proposed Changes
- Use the pre-states from #2174 during block production.
- Running this on Pyrmont shows block production times dropping from ~550ms to ~150ms.
- Create `crit` and `warn` logs when a block is published to the API later than we expect.
- On mainnet we are issuing a warn if the block is published more than 1s later than the slot start and a crit for more than 3s.
- Rename some methods on the `SnapshotCache` for clarity.
- Add the ability to pass the state root to `BeaconChain::produce_block_on_state` to avoid computing a state root. This is a very common LH optimization.
- Add a metric that tracks how late we broadcast blocks received from the HTTP API. This is *technically* a duplicate of a `ValidatorMonitor` log, but I wanted to have it for the case where we aren't monitoring validators too.
## Issue Addressed
- Resolves#2215
## Proposed Changes
Addresses a potential loop when the majority of peers indicate that we are contactable via an IPv6 address.
See https://github.com/sigp/discv5/pull/62 for further rationale.
## Additional Info
The alternative to this PR is to use `--disable-enr-auto-update` and then manually supply an `--enr-address` and `--enr-upd-port`. However, that requires the user to know their IP addresses in order for discovery to work properly. This might not be practical/achievable for some users, hence this hotfix.
## Issue Addressed
resolves#2129resolves#2099
addresses some of #1712
unblocks #2076
unblocks #2153
## Proposed Changes
- Updates all the dependencies mentioned in #2129, except for web3. They haven't merged their tokio 1.0 update because they are waiting on some dependencies of their own. Since we only use web3 in tests, I think updating it in a separate issue is fine. If they are able to merge soon though, I can update in this PR.
- Updates `tokio_util` to 0.6.2 and `bytes` to 1.0.1.
- We haven't made a discv5 release since merging tokio 1.0 updates so I'm using a commit rather than release atm. **Edit:** I think we should merge an update of `tokio_util` to 0.6.2 into discv5 before this release because it has panic fixes in `DelayQueue` --> PR in discv5: https://github.com/sigp/discv5/pull/58
## Additional Info
tokio 1.0 changes that required some changes in lighthouse:
- `interval.next().await.is_some()` -> `interval.tick().await`
- `sleep` future is now `!Unpin` -> https://github.com/tokio-rs/tokio/issues/3028
- `try_recv` has been temporarily removed from `mpsc` -> https://github.com/tokio-rs/tokio/issues/3350
- stream features have moved to `tokio-stream` and `broadcast::Receiver::into_stream()` has been temporarily removed -> `https://github.com/tokio-rs/tokio/issues/2870
- I've copied over the `BroadcastStream` wrapper from this PR, but can update to use `tokio-stream` once it's merged https://github.com/tokio-rs/tokio/pull/3384
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
- Resolves#2064
## Proposed Changes
Adds a `ValidatorMonitor` struct which provides additional logging and Grafana metrics for specific validators.
Use `lighthouse bn --validator-monitor` to automatically enable monitoring for any validator that hits the [subnet subscription](https://ethereum.github.io/eth2.0-APIs/#/Validator/prepareBeaconCommitteeSubnet) HTTP API endpoint.
Also, use `lighthouse bn --validator-monitor-pubkeys` to supply a list of validators which will always be monitored.
See the new docs included in this PR for more info.
## TODO
- [x] Track validator balance, `slashed` status, etc.
- [x] ~~Register slashings in current epoch, not offense epoch~~
- [ ] Publish Grafana dashboard, update TODO link in docs
- [x] ~~#2130 is merged into this branch, resolve that~~
## Issue Addressed
Catching up to a recently merged API spec PR: https://github.com/ethereum/eth2.0-APIs/pull/119
## Proposed Changes
- Return an SSZ beacon state on `/eth/v1/debug/beacon/states/{stateId}` when passed this header: `accept: application/octet-stream`.
- requests to this endpoint with no `accept` header or an `accept` header and a value of `application/json` or `*/*` , or will result in a JSON response
## Additional Info
Co-authored-by: realbigsean <seananderson33@gmail.com>
This is a little bit of a tip-of-the-iceberg PR. It houses a lot of code changes in the libp2p dependency.
This needs a bit of thorough testing before merging.
The primary code changes are:
- General libp2p dependency update
- Gossipsub refactor to shift compression into gossipsub providing performance improvements and improved API for handling compression
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
- Resolves#1883
## Proposed Changes
This follows on from @blacktemplar's work in #2018.
- Allows the VC to connect to multiple BN for redundancy.
- Update the simulator so some nodes always need to rely on their fallback.
- Adds some extra deprecation warnings for `--eth1-endpoint`
- Pass `SignatureBytes` as a reference instead of by value.
## Additional Info
NA
Co-authored-by: blacktemplar <blacktemplar@a1.net>
## Issue Addressed
NA
## Proposed Changes
Updates out of date dependencies.
## Additional Info
See also https://github.com/sigp/lighthouse/issues/1712 for a list of dependencies that are still out of date and the resasons.
## Issue Addressed
Resolves#1434 (this is the last major feature in the standard spec. There are only a couple of places we may be off-spec due to recent spec changes or ongoing discussion)
Partly addresses #1669
## Proposed Changes
- remove the websocket server
- remove the `TeeEventHandler` and `NullEventHandler`
- add server sent events according to the eth2 API spec
## Additional Info
This is according to the currently unmerged PR here: https://github.com/ethereum/eth2.0-APIs/pull/117
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Resolves#2035
## Proposed Changes
Update 405's to 400's for failures when we are parsing path params.
## Additional Info
Haven't updated the same for non-standard endpoints
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
NA
## Proposed Changes
- Log about eth1 whilst waiting for genesis.
- For the block and deposit caches, update them after each download instead of when *all* downloads are complete.
- This prevents the case where a single timeout error can cause us to drop *all* previously download blocks/deposits.
- Set `max_log_requests_per_update` to avoid timeouts due to very large log counts in a response.
- Set `max_blocks_per_update` to prevent a single update of the block cache to download an unreasonable number of blocks.
- This shouldn't have any affect in normal use, it's just a safe-guard against bugs.
- Increase the timeout for eth1 calls from 15s to 60s, as per @pawanjay176's experience with Infura.
## Additional Info
NA
## Description
This PR updates Lighthouse to tokio 0.3. It includes a number of dependency updates and some structural changes as to how we create and spawn tasks.
This also brings with it a number of various improvements:
- Discv5 update
- Libp2p update
- Fix for recompilation issues
- Improved UPnP port mapping handling
- Futures dependency update
- Log downgrade to traces for rejecting peers when we've reached our max
Co-authored-by: blacktemplar <blacktemplar@a1.net>
## Issue Addressed
- Resolves#1424
## Proposed Changes
Add a `GET lighthouse/staking` that returns 200 if the node is ready to stake (i.e., `--eth1` flag is present) or a 404 otherwise.
Whilst the VC is waiting for the genesis time to start (i.e., when the genesis state is known), check the `lighthouse/staking` endpoint and log an error if the node isn't configured for staking.
## Additional Info
NA
## Issue Addressed
- Resolves#1945
## Proposed Changes
- As per #1945, fix a log message from the metrics server that was falsely claiming to be from the api server.
- Ensure successful api request logs are published to debug, not trace. This is something I've wanted to do for a while.
## Additional Info
NA
## Issue Addressed
Catching up on a few eth2 spec updates:
## Proposed Changes
- adding query params to the `GET pool/attestations` endpoint
- allowing the `POST pool/attestations` endpoint to accept an array of attestations
- batching attestation submission
- moving `epoch` from a path param to a query param in the `committees` endpoint
## Additional Info
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Resolves#1801
## Proposed Changes
Verify queries to `attestation_data` are for no later than `current_slot + 1`. If they are later than this, return a 400.
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Resolves#1809Resolves#1824Resolves#1818Resolves#1828 (hopefully)
## Proposed Changes
- add `validator_index` to the proposer duties endpoint
- add the ability to query for historical proposer duties
- `StateId` deserialization now fails with a 400 warp rejection
- add the `validator_balances` endpoint
- update the `aggregate_and_proofs` endpoint to accept an array
- updates the attester duties endpoint from a `GET` to a `POST`
- reduces the number of times we query for proposer duties from once per slot per validator to only once per slot
Co-authored-by: realbigsean <seananderson33@gmail.com>
Co-authored-by: Paul Hauner <paul@paulhauner.com>
## Issue Addressed
- Related to #1691
## Proposed Changes
Adds the following API endpoints:
- `GET lighthouse/eth1/syncing`: status about how synced we are with Eth1.
- `GET lighthouse/eth1/block_cache`: all locally cached eth1 blocks.
- `GET lighthouse/eth1/deposit_cache`: all locally cached eth1 deposits.
Additionally:
- Moves some types from the `beacon_node/eth1` to the `common/eth2` crate, so they can be used in the API without duplication.
- Allow `update_deposit_cache` and `update_block_cache` to take an optional head block number to avoid duplicate requests.
## Additional Info
TBC
## Issue Addressed
Fixes head syncing
## Proposed Changes
- Get back to statusing peers after removing chain segments and making the peer manager deal with status according to the Sync status, preventing an old known deadlock
- Also a bug where a chain would get removed if the optimistic batch succeeds being empty
## Additional Info
Tested on Medalla and looking good
## Issue Addressed
NA
## Proposed Changes
As raised by @hermanjunge in a DM, the `http_api` tests have been observed taking 100+ minutes on debug. This PR:
- Moves the `http_api` tests to only run in release.
- Groups some `http_api` tests to reduce test-setup overhead.
## Additional Info
NA
## Issue Addressed
Michael's comment here: https://github.com/sigp/lighthouse/issues/1434#issuecomment-708834079Resolves#1808
## Proposed Changes
- Add query param `id` and `status` to the `validators` endpoint
- Add string serialization and deserialization for `ValidatorStatus`
- Drop `Epoch` from `ValidatorStatus` variants
## Additional Info
Please provide any additional information. For example, future considerations
or information useful for reviewers.
## Issue Addressed
Potentially resolves#1647 and sync stalls.
## Proposed Changes
The handling of the state of banned peers was inadequate for the complex peerdb data structure. We store a limited number of disconnected and banned peers in the db. We were not tracking intermediate "disconnecting" states and the in some circumstances we were updating the peer state without informing the peerdb. This lead to a number of inconsistencies in the peer state.
Further, the peer manager could ban a peer changing a peer's state from being connected to banned. In this circumstance, if the peer then disconnected, we didn't inform the application layer, which lead to applications like sync not being informed of a peers disconnection. This could lead to sync stalling and having to require a lighthouse restart.
Improved handling for peer states and interactions with the peerdb is made in this PR.
## Issue Addressed
NA
## Proposed Changes
Adds a `lighthouse/beacon/states/:state_id/ssz` endpoint to allow us to pull the genesis state from the API.
## Additional Info
NA
## Issue Addressed
- Resolves#1766
## Proposed Changes
- Use the `warp::filters::cors` filter instead of our work-around.
## Additional Info
It's not trivial to enable/disable `cors` using `warp`, since using `routes.with(cors)` changes the type of `routes`. This makes it difficult to apply/not apply cors at runtime. My solution has been to *always* use the `warp::filters::cors` wrapper but when cors should be disabled, just pass the HTTP server listen address as the only permissible origin.
## Issue Addressed
`node` endpoints in #1434
## Proposed Changes
Implement these:
```
/eth/v1/node/health
/eth/v1/node/peers/{peer_id}
/eth/v1/node/peers
```
- Add an `Option<Enr>` to `PeerInfo`
- Finish implementation of `/eth/v1/node/identity`
## Additional Info
- should update the `peers` endpoints when #1764 is resolved
Co-authored-by: realbigsean <seananderson33@gmail.com>
## Issue Addressed
Resolves#1792
## Proposed Changes
Use `chain.best_slot()` instead of the sync state's target slot in the `not_while_syncing_filter`
## Additional Info
N/A
## Issue Addressed
#1614 and a couple of sync-stalling problems, the most important is a cyclic dependency between the sync manager and the peer manager
## Issue Addressed
Closes#1557
## Proposed Changes
Modify the pruning algorithm so that it mutates the head-tracker _before_ committing the database transaction to disk, and _only if_ all the heads to be removed are still present in the head-tracker (i.e. no concurrent mutations).
In the process of writing and testing this I also had to make a few other changes:
* Use internal mutability for all `BeaconChainHarness` functions (namely the RNG and the graffiti), in order to enable parallel calls (see testing section below).
* Disable logging in harness tests unless the `test_logger` feature is turned on
And chose to make some clean-ups:
* Delete the `NullMigrator`
* Remove type-based configuration for the migrator in favour of runtime config (simpler, less duplicated code)
* Use the non-blocking migrator unless the blocking migrator is required. In the store tests we need the blocking migrator because some tests make asserts about the state of the DB after the migration has run.
* Rename `validators_keypairs` -> `validator_keypairs` in the `BeaconChainHarness`
## Testing
To confirm that the fix worked, I wrote a test using [Hiatus](https://crates.io/crates/hiatus), which can be found here:
https://github.com/michaelsproul/lighthouse/tree/hiatus-issue-1557
That test can't be merged because it inserts random breakpoints everywhere, but if you check out that branch you can run the test with:
```
$ cd beacon_node/beacon_chain
$ cargo test --release --test parallel_tests --features test_logger
```
It should pass, and the log output should show:
```
WARN Pruning deferred because of a concurrent mutation, message: this is expected only very rarely!
```
## Additional Info
This is a backwards-compatible change with no impact on consensus.
## Issue Addressed
- Resolves#1706
## Proposed Changes
Updates dependencies across the workspace. Any crate that was not able to be brought to the latest version is listed in #1712.
## Additional Info
NA
* Initial rebase
* Remove old code
* Correct release tests
* Rebase commit
* Remove eth2-testnet dep on eth2libp2p
* Remove crates lost in rebase
* Remove unused dep
This commit was modified by Paul H whilst rebasing master onto
v0.3.0-staging
Adding UPnP support will help grow the DHT by allowing NAT traversal for peers with UPnP supported routers.
Using IGD library: https://docs.rs/igd/0.10.0/igd/
Adding the the libp2p tcp port and discovery udp port. If this fails it simply logs the attempt and moves on
Co-authored-by: Age Manning <Age@AgeManning.com>
## Issue Addressed
NA
## Proposed Changes
- Implements a HTTP API for the validator client.
- Creates EIP-2335 keystores with an empty `description` field, instead of a missing `description` field. Adds option to set name.
- Be more graceful with setups without any validators (yet)
- Remove an error log when there are no validators.
- Create the `validator` dir if it doesn't exist.
- Allow building a `ValidatorDir` without a withdrawal keystore (required for the API method where we only post a voting keystore).
- Add optional `description` field to `validator_definitions.yml`
## TODO
- [x] Signature header, as per https://github.com/sigp/lighthouse/issues/1269#issuecomment-649879855
- [x] Return validator descriptions
- [x] Return deposit data
- [x] Respect the mnemonic offset
- [x] Check that mnemonic can derive returned keys
- [x] Be strict about non-localhost
- [x] Allow graceful start without any validators (+ create validator dir)
- [x] Docs final pass
- [x] Swap to EIP-2335 description field.
- [x] Fix Zerioze TODO in VC api types.
- [x] Zeroize secp256k1 key
## Endpoints
- [x] `GET /lighthouse/version`
- [x] `GET /lighthouse/health`
- [x] `GET /lighthouse/validators`
- [x] `POST /lighthouse/validators/hd`
- [x] `POST /lighthouse/validators/keystore`
- [x] `PATCH /lighthouse/validators/:validator_pubkey`
- [ ] ~~`POST /lighthouse/validators/:validator_pubkey/exit/:epoch`~~ Future works
## Additional Info
TBC
- Resolves#1550
- Resolves#824
- Resolves#825
- Resolves#1131
- Resolves#1411
- Resolves#1256
- Resolve#1177
- Includes the `ShufflingId` struct initially defined in #1492. That PR is now closed and the changes are included here, with significant bug fixes.
- Implement the https://github.com/ethereum/eth2.0-APIs in a new `http_api` crate using `warp`. This replaces the `rest_api` crate.
- Add a new `common/eth2` crate which provides a wrapper around `reqwest`, providing the HTTP client that is used by the validator client and for testing. This replaces the `common/remote_beacon_node` crate.
- Create a `http_metrics` crate which is a dedicated server for Prometheus metrics (they are no longer served on the same port as the REST API). We now have flags for `--metrics`, `--metrics-address`, etc.
- Allow the `subnet_id` to be an optional parameter for `VerifiedUnaggregatedAttestation::verify`. This means it does not need to be provided unnecessarily by the validator client.
- Move `fn map_attestation_committee` in `mod beacon_chain::attestation_verification` to a new `fn with_committee_cache` on the `BeaconChain` so the same cache can be used for obtaining validator duties.
- Add some other helpers to `BeaconChain` to assist with common API duties (e.g., `block_root_at_slot`, `head_beacon_block_root`).
- Change the `NaiveAggregationPool` so it can index attestations by `hash_tree_root(attestation.data)`. This is a requirement of the API.
- Add functions to `BeaconChainHarness` to allow it to create slashings and exits.
- Allow for `eth1::Eth1NetworkId` to go to/from a `String`.
- Add functions to the `OperationPool` to allow getting all objects in the pool.
- Add function to `BeaconState` to check if a committee cache is initialized.
- Fix bug where `seconds_per_eth1_block` was not transferring over from `YamlConfig` to `ChainSpec`.
- Add the `deposit_contract_address` to `YamlConfig` and `ChainSpec`. We needed to be able to return it in an API response.
- Change some uses of serde `serialize_with` and `deserialize_with` to a single use of `with` (code quality).
- Impl `Display` and `FromStr` for several BLS fields.
- Check for clock discrepancy when VC polls BN for sync state (with +/- 1 slot tolerance). This is not intended to be comprehensive, it was just easy to do.
- See #1434 for a per-endpoint overview.
- Seeking clarity here: https://github.com/ethereum/eth2.0-APIs/issues/75
- [x] Add docs for prom port to close#1256
- [x] Follow up on this #1177
- [x] ~~Follow up with #1424~~ Will fix in future PR.
- [x] Follow up with #1411
- [x] ~~Follow up with #1260~~ Will fix in future PR.
- [x] Add quotes to all integers.
- [x] Remove `rest_types`
- [x] Address missing beacon block error. (#1629)
- [x] ~~Add tests for lighthouse/peers endpoints~~ Wontfix
- [x] ~~Follow up with validator status proposal~~ Tracked in #1434
- [x] Unify graffiti structs
- [x] ~~Start server when waiting for genesis?~~ Will fix in future PR.
- [x] TODO in http_api tests
- [x] Move lighthouse endpoints off /eth/v1
- [x] Update docs to link to standard
- ~~Blocked on #1586~~
Co-authored-by: Michael Sproul <michael@sigmaprime.io>
