lighthouse/beacon_node/beacon_chain/tests/merge.rs

212 lines
6.1 KiB
Rust
Raw Normal View History

#![cfg(not(debug_assertions))] // Tests run too slow in debug.
use beacon_chain::test_utils::BeaconChainHarness;
use execution_layer::test_utils::{generate_pow_block, Block, DEFAULT_TERMINAL_BLOCK};
use types::*;
const VALIDATOR_COUNT: usize = 32;
type E = MainnetEthSpec;
fn verify_execution_payload_chain<T: EthSpec>(chain: &[FullPayload<T>]) {
let mut prev_ep: Option<FullPayload<T>> = None;
for ep in chain {
assert!(*ep != FullPayload::default());
assert!(ep.block_hash() != ExecutionBlockHash::zero());
// Check against previous `ExecutionPayload`.
if let Some(prev_ep) = prev_ep {
assert_eq!(prev_ep.block_hash(), ep.execution_payload.parent_hash);
assert_eq!(
prev_ep.execution_payload.block_number + 1,
ep.execution_payload.block_number
);
assert!(ep.execution_payload.timestamp > prev_ep.execution_payload.timestamp);
}
prev_ep = Some(ep.clone());
}
}
Use async code when interacting with EL (#3244) ## Overview This rather extensive PR achieves two primary goals: 1. Uses the finalized/justified checkpoints of fork choice (FC), rather than that of the head state. 2. Refactors fork choice, block production and block processing to `async` functions. Additionally, it achieves: - Concurrent forkchoice updates to the EL and cache pruning after a new head is selected. - Concurrent "block packing" (attestations, etc) and execution payload retrieval during block production. - Concurrent per-block-processing and execution payload verification during block processing. - The `Arc`-ification of `SignedBeaconBlock` during block processing (it's never mutated, so why not?): - I had to do this to deal with sending blocks into spawned tasks. - Previously we were cloning the beacon block at least 2 times during each block processing, these clones are either removed or turned into cheaper `Arc` clones. - We were also `Box`-ing and un-`Box`-ing beacon blocks as they moved throughout the networking crate. This is not a big deal, but it's nice to avoid shifting things between the stack and heap. - Avoids cloning *all the blocks* in *every chain segment* during sync. - It also has the potential to clean up our code where we need to pass an *owned* block around so we can send it back in the case of an error (I didn't do much of this, my PR is already big enough :sweat_smile:) - The `BeaconChain::HeadSafetyStatus` struct was removed. It was an old relic from prior merge specs. For motivation for this change, see https://github.com/sigp/lighthouse/pull/3244#issuecomment-1160963273 ## Changes to `canonical_head` and `fork_choice` Previously, the `BeaconChain` had two separate fields: ``` canonical_head: RwLock<Snapshot>, fork_choice: RwLock<BeaconForkChoice> ``` Now, we have grouped these values under a single struct: ``` canonical_head: CanonicalHead { cached_head: RwLock<Arc<Snapshot>>, fork_choice: RwLock<BeaconForkChoice> } ``` Apart from ergonomics, the only *actual* change here is wrapping the canonical head snapshot in an `Arc`. This means that we no longer need to hold the `cached_head` (`canonical_head`, in old terms) lock when we want to pull some values from it. This was done to avoid deadlock risks by preventing functions from acquiring (and holding) the `cached_head` and `fork_choice` locks simultaneously. ## Breaking Changes ### The `state` (root) field in the `finalized_checkpoint` SSE event Consider the scenario where epoch `n` is just finalized, but `start_slot(n)` is skipped. There are two state roots we might in the `finalized_checkpoint` SSE event: 1. The state root of the finalized block, which is `get_block(finalized_checkpoint.root).state_root`. 4. The state root at slot of `start_slot(n)`, which would be the state from (1), but "skipped forward" through any skip slots. Previously, Lighthouse would choose (2). However, we can see that when [Teku generates that event](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/beaconrestapi/src/main/java/tech/pegasys/teku/beaconrestapi/handlers/v1/events/EventSubscriptionManager.java#L171-L182) it uses [`getStateRootFromBlockRoot`](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/provider/src/main/java/tech/pegasys/teku/api/ChainDataProvider.java#L336-L341) which uses (1). I have switched Lighthouse from (2) to (1). I think it's a somewhat arbitrary choice between the two, where (1) is easier to compute and is consistent with Teku. ## Notes for Reviewers I've renamed `BeaconChain::fork_choice` to `BeaconChain::recompute_head`. Doing this helped ensure I broke all previous uses of fork choice and I also find it more descriptive. It describes an action and can't be confused with trying to get a reference to the `ForkChoice` struct. I've changed the ordering of SSE events when a block is received. It used to be `[block, finalized, head]` and now it's `[block, head, finalized]`. It was easier this way and I don't think we were making any promises about SSE event ordering so it's not "breaking". I've made it so fork choice will run when it's first constructed. I did this because I wanted to have a cached version of the last call to `get_head`. Ensuring `get_head` has been run *at least once* means that the cached values doesn't need to wrapped in an `Option`. This was fairly simple, it just involved passing a `slot` to the constructor so it knows *when* it's being run. When loading a fork choice from the store and a slot clock isn't handy I've just used the `slot` that was saved in the `fork_choice_store`. That seems like it would be a faithful representation of the slot when we saved it. I added the `genesis_time: u64` to the `BeaconChain`. It's small, constant and nice to have around. Since we're using FC for the fin/just checkpoints, we no longer get the `0x00..00` roots at genesis. You can see I had to remove a work-around in `ef-tests` here: b56be3bc2. I can't find any reason why this would be an issue, if anything I think it'll be better since the genesis-alias has caught us out a few times (0x00..00 isn't actually a real root). Edit: I did find a case where the `network` expected the 0x00..00 alias and patched it here: 3f26ac3e2. You'll notice a lot of changes in tests. Generally, tests should be functionally equivalent. Here are the things creating the most diff-noise in tests: - Changing tests to be `tokio::async` tests. - Adding `.await` to fork choice, block processing and block production functions. - Refactor of the `canonical_head` "API" provided by the `BeaconChain`. E.g., `chain.canonical_head.cached_head()` instead of `chain.canonical_head.read()`. - Wrapping `SignedBeaconBlock` in an `Arc`. - In the `beacon_chain/tests/block_verification`, we can't use the `lazy_static` `CHAIN_SEGMENT` variable anymore since it's generated with an async function. We just generate it in each test, not so efficient but hopefully insignificant. I had to disable `rayon` concurrent tests in the `fork_choice` tests. This is because the use of `rayon` and `block_on` was causing a panic. Co-authored-by: Mac L <mjladson@pm.me>
2022-07-03 05:36:50 +00:00
#[tokio::test]
// TODO(merge): This isn't working cause the non-zero values in `initialize_beacon_state_from_eth1`
// are causing failed lookups to the execution node. I need to come back to this.
#[should_panic]
Use async code when interacting with EL (#3244) ## Overview This rather extensive PR achieves two primary goals: 1. Uses the finalized/justified checkpoints of fork choice (FC), rather than that of the head state. 2. Refactors fork choice, block production and block processing to `async` functions. Additionally, it achieves: - Concurrent forkchoice updates to the EL and cache pruning after a new head is selected. - Concurrent "block packing" (attestations, etc) and execution payload retrieval during block production. - Concurrent per-block-processing and execution payload verification during block processing. - The `Arc`-ification of `SignedBeaconBlock` during block processing (it's never mutated, so why not?): - I had to do this to deal with sending blocks into spawned tasks. - Previously we were cloning the beacon block at least 2 times during each block processing, these clones are either removed or turned into cheaper `Arc` clones. - We were also `Box`-ing and un-`Box`-ing beacon blocks as they moved throughout the networking crate. This is not a big deal, but it's nice to avoid shifting things between the stack and heap. - Avoids cloning *all the blocks* in *every chain segment* during sync. - It also has the potential to clean up our code where we need to pass an *owned* block around so we can send it back in the case of an error (I didn't do much of this, my PR is already big enough :sweat_smile:) - The `BeaconChain::HeadSafetyStatus` struct was removed. It was an old relic from prior merge specs. For motivation for this change, see https://github.com/sigp/lighthouse/pull/3244#issuecomment-1160963273 ## Changes to `canonical_head` and `fork_choice` Previously, the `BeaconChain` had two separate fields: ``` canonical_head: RwLock<Snapshot>, fork_choice: RwLock<BeaconForkChoice> ``` Now, we have grouped these values under a single struct: ``` canonical_head: CanonicalHead { cached_head: RwLock<Arc<Snapshot>>, fork_choice: RwLock<BeaconForkChoice> } ``` Apart from ergonomics, the only *actual* change here is wrapping the canonical head snapshot in an `Arc`. This means that we no longer need to hold the `cached_head` (`canonical_head`, in old terms) lock when we want to pull some values from it. This was done to avoid deadlock risks by preventing functions from acquiring (and holding) the `cached_head` and `fork_choice` locks simultaneously. ## Breaking Changes ### The `state` (root) field in the `finalized_checkpoint` SSE event Consider the scenario where epoch `n` is just finalized, but `start_slot(n)` is skipped. There are two state roots we might in the `finalized_checkpoint` SSE event: 1. The state root of the finalized block, which is `get_block(finalized_checkpoint.root).state_root`. 4. The state root at slot of `start_slot(n)`, which would be the state from (1), but "skipped forward" through any skip slots. Previously, Lighthouse would choose (2). However, we can see that when [Teku generates that event](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/beaconrestapi/src/main/java/tech/pegasys/teku/beaconrestapi/handlers/v1/events/EventSubscriptionManager.java#L171-L182) it uses [`getStateRootFromBlockRoot`](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/provider/src/main/java/tech/pegasys/teku/api/ChainDataProvider.java#L336-L341) which uses (1). I have switched Lighthouse from (2) to (1). I think it's a somewhat arbitrary choice between the two, where (1) is easier to compute and is consistent with Teku. ## Notes for Reviewers I've renamed `BeaconChain::fork_choice` to `BeaconChain::recompute_head`. Doing this helped ensure I broke all previous uses of fork choice and I also find it more descriptive. It describes an action and can't be confused with trying to get a reference to the `ForkChoice` struct. I've changed the ordering of SSE events when a block is received. It used to be `[block, finalized, head]` and now it's `[block, head, finalized]`. It was easier this way and I don't think we were making any promises about SSE event ordering so it's not "breaking". I've made it so fork choice will run when it's first constructed. I did this because I wanted to have a cached version of the last call to `get_head`. Ensuring `get_head` has been run *at least once* means that the cached values doesn't need to wrapped in an `Option`. This was fairly simple, it just involved passing a `slot` to the constructor so it knows *when* it's being run. When loading a fork choice from the store and a slot clock isn't handy I've just used the `slot` that was saved in the `fork_choice_store`. That seems like it would be a faithful representation of the slot when we saved it. I added the `genesis_time: u64` to the `BeaconChain`. It's small, constant and nice to have around. Since we're using FC for the fin/just checkpoints, we no longer get the `0x00..00` roots at genesis. You can see I had to remove a work-around in `ef-tests` here: b56be3bc2. I can't find any reason why this would be an issue, if anything I think it'll be better since the genesis-alias has caught us out a few times (0x00..00 isn't actually a real root). Edit: I did find a case where the `network` expected the 0x00..00 alias and patched it here: 3f26ac3e2. You'll notice a lot of changes in tests. Generally, tests should be functionally equivalent. Here are the things creating the most diff-noise in tests: - Changing tests to be `tokio::async` tests. - Adding `.await` to fork choice, block processing and block production functions. - Refactor of the `canonical_head` "API" provided by the `BeaconChain`. E.g., `chain.canonical_head.cached_head()` instead of `chain.canonical_head.read()`. - Wrapping `SignedBeaconBlock` in an `Arc`. - In the `beacon_chain/tests/block_verification`, we can't use the `lazy_static` `CHAIN_SEGMENT` variable anymore since it's generated with an async function. We just generate it in each test, not so efficient but hopefully insignificant. I had to disable `rayon` concurrent tests in the `fork_choice` tests. This is because the use of `rayon` and `block_on` was causing a panic. Co-authored-by: Mac L <mjladson@pm.me>
2022-07-03 05:36:50 +00:00
async fn merge_with_terminal_block_hash_override() {
let altair_fork_epoch = Epoch::new(0);
let bellatrix_fork_epoch = Epoch::new(0);
let mut spec = E::default_spec();
spec.altair_fork_epoch = Some(altair_fork_epoch);
spec.bellatrix_fork_epoch = Some(bellatrix_fork_epoch);
let genesis_pow_block_hash = generate_pow_block(
spec.terminal_total_difficulty,
DEFAULT_TERMINAL_BLOCK,
0,
ExecutionBlockHash::zero(),
)
.unwrap()
.block_hash;
spec.terminal_block_hash = genesis_pow_block_hash;
let harness = BeaconChainHarness::builder(E::default())
.spec(spec)
Enable proposer boost re-orging (#2860) ## Proposed Changes With proposer boosting implemented (#2822) we have an opportunity to re-org out late blocks. This PR adds three flags to the BN to control this behaviour: * `--disable-proposer-reorgs`: turn aggressive re-orging off (it's on by default). * `--proposer-reorg-threshold N`: attempt to orphan blocks with less than N% of the committee vote. If this parameter isn't set then N defaults to 20% when the feature is enabled. * `--proposer-reorg-epochs-since-finalization N`: only attempt to re-org late blocks when the number of epochs since finalization is less than or equal to N. The default is 2 epochs, meaning re-orgs will only be attempted when the chain is finalizing optimally. For safety Lighthouse will only attempt a re-org under very specific conditions: 1. The block being proposed is 1 slot after the canonical head, and the canonical head is 1 slot after its parent. i.e. at slot `n + 1` rather than building on the block from slot `n` we build on the block from slot `n - 1`. 2. The current canonical head received less than N% of the committee vote. N should be set depending on the proposer boost fraction itself, the fraction of the network that is believed to be applying it, and the size of the largest entity that could be hoarding votes. 3. The current canonical head arrived after the attestation deadline from our perspective. This condition was only added to support suppression of forkchoiceUpdated messages, but makes intuitive sense. 4. The block is being proposed in the first 2 seconds of the slot. This gives it time to propagate and receive the proposer boost. ## Additional Info For the initial idea and background, see: https://github.com/ethereum/consensus-specs/pull/2353#issuecomment-950238004 There is also a specification for this feature here: https://github.com/ethereum/consensus-specs/pull/3034 Co-authored-by: Michael Sproul <micsproul@gmail.com> Co-authored-by: pawan <pawandhananjay@gmail.com>
2022-12-13 09:57:26 +00:00
.logger(logging::test_logger())
.deterministic_keypairs(VALIDATOR_COUNT)
.fresh_ephemeral_store()
.mock_execution_layer()
.build();
assert_eq!(
harness
.execution_block_generator()
.latest_block()
.unwrap()
.block_hash(),
genesis_pow_block_hash,
"pre-condition"
);
assert!(
harness
.chain
Use async code when interacting with EL (#3244) ## Overview This rather extensive PR achieves two primary goals: 1. Uses the finalized/justified checkpoints of fork choice (FC), rather than that of the head state. 2. Refactors fork choice, block production and block processing to `async` functions. Additionally, it achieves: - Concurrent forkchoice updates to the EL and cache pruning after a new head is selected. - Concurrent "block packing" (attestations, etc) and execution payload retrieval during block production. - Concurrent per-block-processing and execution payload verification during block processing. - The `Arc`-ification of `SignedBeaconBlock` during block processing (it's never mutated, so why not?): - I had to do this to deal with sending blocks into spawned tasks. - Previously we were cloning the beacon block at least 2 times during each block processing, these clones are either removed or turned into cheaper `Arc` clones. - We were also `Box`-ing and un-`Box`-ing beacon blocks as they moved throughout the networking crate. This is not a big deal, but it's nice to avoid shifting things between the stack and heap. - Avoids cloning *all the blocks* in *every chain segment* during sync. - It also has the potential to clean up our code where we need to pass an *owned* block around so we can send it back in the case of an error (I didn't do much of this, my PR is already big enough :sweat_smile:) - The `BeaconChain::HeadSafetyStatus` struct was removed. It was an old relic from prior merge specs. For motivation for this change, see https://github.com/sigp/lighthouse/pull/3244#issuecomment-1160963273 ## Changes to `canonical_head` and `fork_choice` Previously, the `BeaconChain` had two separate fields: ``` canonical_head: RwLock<Snapshot>, fork_choice: RwLock<BeaconForkChoice> ``` Now, we have grouped these values under a single struct: ``` canonical_head: CanonicalHead { cached_head: RwLock<Arc<Snapshot>>, fork_choice: RwLock<BeaconForkChoice> } ``` Apart from ergonomics, the only *actual* change here is wrapping the canonical head snapshot in an `Arc`. This means that we no longer need to hold the `cached_head` (`canonical_head`, in old terms) lock when we want to pull some values from it. This was done to avoid deadlock risks by preventing functions from acquiring (and holding) the `cached_head` and `fork_choice` locks simultaneously. ## Breaking Changes ### The `state` (root) field in the `finalized_checkpoint` SSE event Consider the scenario where epoch `n` is just finalized, but `start_slot(n)` is skipped. There are two state roots we might in the `finalized_checkpoint` SSE event: 1. The state root of the finalized block, which is `get_block(finalized_checkpoint.root).state_root`. 4. The state root at slot of `start_slot(n)`, which would be the state from (1), but "skipped forward" through any skip slots. Previously, Lighthouse would choose (2). However, we can see that when [Teku generates that event](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/beaconrestapi/src/main/java/tech/pegasys/teku/beaconrestapi/handlers/v1/events/EventSubscriptionManager.java#L171-L182) it uses [`getStateRootFromBlockRoot`](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/provider/src/main/java/tech/pegasys/teku/api/ChainDataProvider.java#L336-L341) which uses (1). I have switched Lighthouse from (2) to (1). I think it's a somewhat arbitrary choice between the two, where (1) is easier to compute and is consistent with Teku. ## Notes for Reviewers I've renamed `BeaconChain::fork_choice` to `BeaconChain::recompute_head`. Doing this helped ensure I broke all previous uses of fork choice and I also find it more descriptive. It describes an action and can't be confused with trying to get a reference to the `ForkChoice` struct. I've changed the ordering of SSE events when a block is received. It used to be `[block, finalized, head]` and now it's `[block, head, finalized]`. It was easier this way and I don't think we were making any promises about SSE event ordering so it's not "breaking". I've made it so fork choice will run when it's first constructed. I did this because I wanted to have a cached version of the last call to `get_head`. Ensuring `get_head` has been run *at least once* means that the cached values doesn't need to wrapped in an `Option`. This was fairly simple, it just involved passing a `slot` to the constructor so it knows *when* it's being run. When loading a fork choice from the store and a slot clock isn't handy I've just used the `slot` that was saved in the `fork_choice_store`. That seems like it would be a faithful representation of the slot when we saved it. I added the `genesis_time: u64` to the `BeaconChain`. It's small, constant and nice to have around. Since we're using FC for the fin/just checkpoints, we no longer get the `0x00..00` roots at genesis. You can see I had to remove a work-around in `ef-tests` here: b56be3bc2. I can't find any reason why this would be an issue, if anything I think it'll be better since the genesis-alias has caught us out a few times (0x00..00 isn't actually a real root). Edit: I did find a case where the `network` expected the 0x00..00 alias and patched it here: 3f26ac3e2. You'll notice a lot of changes in tests. Generally, tests should be functionally equivalent. Here are the things creating the most diff-noise in tests: - Changing tests to be `tokio::async` tests. - Adding `.await` to fork choice, block processing and block production functions. - Refactor of the `canonical_head` "API" provided by the `BeaconChain`. E.g., `chain.canonical_head.cached_head()` instead of `chain.canonical_head.read()`. - Wrapping `SignedBeaconBlock` in an `Arc`. - In the `beacon_chain/tests/block_verification`, we can't use the `lazy_static` `CHAIN_SEGMENT` variable anymore since it's generated with an async function. We just generate it in each test, not so efficient but hopefully insignificant. I had to disable `rayon` concurrent tests in the `fork_choice` tests. This is because the use of `rayon` and `block_on` was causing a panic. Co-authored-by: Mac L <mjladson@pm.me>
2022-07-03 05:36:50 +00:00
.head_snapshot()
.beacon_block
.as_merge()
.is_ok(),
"genesis block should be a merge block"
);
let mut execution_payloads = vec![];
for i in 0..E::slots_per_epoch() * 3 {
Use async code when interacting with EL (#3244) ## Overview This rather extensive PR achieves two primary goals: 1. Uses the finalized/justified checkpoints of fork choice (FC), rather than that of the head state. 2. Refactors fork choice, block production and block processing to `async` functions. Additionally, it achieves: - Concurrent forkchoice updates to the EL and cache pruning after a new head is selected. - Concurrent "block packing" (attestations, etc) and execution payload retrieval during block production. - Concurrent per-block-processing and execution payload verification during block processing. - The `Arc`-ification of `SignedBeaconBlock` during block processing (it's never mutated, so why not?): - I had to do this to deal with sending blocks into spawned tasks. - Previously we were cloning the beacon block at least 2 times during each block processing, these clones are either removed or turned into cheaper `Arc` clones. - We were also `Box`-ing and un-`Box`-ing beacon blocks as they moved throughout the networking crate. This is not a big deal, but it's nice to avoid shifting things between the stack and heap. - Avoids cloning *all the blocks* in *every chain segment* during sync. - It also has the potential to clean up our code where we need to pass an *owned* block around so we can send it back in the case of an error (I didn't do much of this, my PR is already big enough :sweat_smile:) - The `BeaconChain::HeadSafetyStatus` struct was removed. It was an old relic from prior merge specs. For motivation for this change, see https://github.com/sigp/lighthouse/pull/3244#issuecomment-1160963273 ## Changes to `canonical_head` and `fork_choice` Previously, the `BeaconChain` had two separate fields: ``` canonical_head: RwLock<Snapshot>, fork_choice: RwLock<BeaconForkChoice> ``` Now, we have grouped these values under a single struct: ``` canonical_head: CanonicalHead { cached_head: RwLock<Arc<Snapshot>>, fork_choice: RwLock<BeaconForkChoice> } ``` Apart from ergonomics, the only *actual* change here is wrapping the canonical head snapshot in an `Arc`. This means that we no longer need to hold the `cached_head` (`canonical_head`, in old terms) lock when we want to pull some values from it. This was done to avoid deadlock risks by preventing functions from acquiring (and holding) the `cached_head` and `fork_choice` locks simultaneously. ## Breaking Changes ### The `state` (root) field in the `finalized_checkpoint` SSE event Consider the scenario where epoch `n` is just finalized, but `start_slot(n)` is skipped. There are two state roots we might in the `finalized_checkpoint` SSE event: 1. The state root of the finalized block, which is `get_block(finalized_checkpoint.root).state_root`. 4. The state root at slot of `start_slot(n)`, which would be the state from (1), but "skipped forward" through any skip slots. Previously, Lighthouse would choose (2). However, we can see that when [Teku generates that event](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/beaconrestapi/src/main/java/tech/pegasys/teku/beaconrestapi/handlers/v1/events/EventSubscriptionManager.java#L171-L182) it uses [`getStateRootFromBlockRoot`](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/provider/src/main/java/tech/pegasys/teku/api/ChainDataProvider.java#L336-L341) which uses (1). I have switched Lighthouse from (2) to (1). I think it's a somewhat arbitrary choice between the two, where (1) is easier to compute and is consistent with Teku. ## Notes for Reviewers I've renamed `BeaconChain::fork_choice` to `BeaconChain::recompute_head`. Doing this helped ensure I broke all previous uses of fork choice and I also find it more descriptive. It describes an action and can't be confused with trying to get a reference to the `ForkChoice` struct. I've changed the ordering of SSE events when a block is received. It used to be `[block, finalized, head]` and now it's `[block, head, finalized]`. It was easier this way and I don't think we were making any promises about SSE event ordering so it's not "breaking". I've made it so fork choice will run when it's first constructed. I did this because I wanted to have a cached version of the last call to `get_head`. Ensuring `get_head` has been run *at least once* means that the cached values doesn't need to wrapped in an `Option`. This was fairly simple, it just involved passing a `slot` to the constructor so it knows *when* it's being run. When loading a fork choice from the store and a slot clock isn't handy I've just used the `slot` that was saved in the `fork_choice_store`. That seems like it would be a faithful representation of the slot when we saved it. I added the `genesis_time: u64` to the `BeaconChain`. It's small, constant and nice to have around. Since we're using FC for the fin/just checkpoints, we no longer get the `0x00..00` roots at genesis. You can see I had to remove a work-around in `ef-tests` here: b56be3bc2. I can't find any reason why this would be an issue, if anything I think it'll be better since the genesis-alias has caught us out a few times (0x00..00 isn't actually a real root). Edit: I did find a case where the `network` expected the 0x00..00 alias and patched it here: 3f26ac3e2. You'll notice a lot of changes in tests. Generally, tests should be functionally equivalent. Here are the things creating the most diff-noise in tests: - Changing tests to be `tokio::async` tests. - Adding `.await` to fork choice, block processing and block production functions. - Refactor of the `canonical_head` "API" provided by the `BeaconChain`. E.g., `chain.canonical_head.cached_head()` instead of `chain.canonical_head.read()`. - Wrapping `SignedBeaconBlock` in an `Arc`. - In the `beacon_chain/tests/block_verification`, we can't use the `lazy_static` `CHAIN_SEGMENT` variable anymore since it's generated with an async function. We just generate it in each test, not so efficient but hopefully insignificant. I had to disable `rayon` concurrent tests in the `fork_choice` tests. This is because the use of `rayon` and `block_on` was causing a panic. Co-authored-by: Mac L <mjladson@pm.me>
2022-07-03 05:36:50 +00:00
harness.extend_slots(1).await;
Use async code when interacting with EL (#3244) ## Overview This rather extensive PR achieves two primary goals: 1. Uses the finalized/justified checkpoints of fork choice (FC), rather than that of the head state. 2. Refactors fork choice, block production and block processing to `async` functions. Additionally, it achieves: - Concurrent forkchoice updates to the EL and cache pruning after a new head is selected. - Concurrent "block packing" (attestations, etc) and execution payload retrieval during block production. - Concurrent per-block-processing and execution payload verification during block processing. - The `Arc`-ification of `SignedBeaconBlock` during block processing (it's never mutated, so why not?): - I had to do this to deal with sending blocks into spawned tasks. - Previously we were cloning the beacon block at least 2 times during each block processing, these clones are either removed or turned into cheaper `Arc` clones. - We were also `Box`-ing and un-`Box`-ing beacon blocks as they moved throughout the networking crate. This is not a big deal, but it's nice to avoid shifting things between the stack and heap. - Avoids cloning *all the blocks* in *every chain segment* during sync. - It also has the potential to clean up our code where we need to pass an *owned* block around so we can send it back in the case of an error (I didn't do much of this, my PR is already big enough :sweat_smile:) - The `BeaconChain::HeadSafetyStatus` struct was removed. It was an old relic from prior merge specs. For motivation for this change, see https://github.com/sigp/lighthouse/pull/3244#issuecomment-1160963273 ## Changes to `canonical_head` and `fork_choice` Previously, the `BeaconChain` had two separate fields: ``` canonical_head: RwLock<Snapshot>, fork_choice: RwLock<BeaconForkChoice> ``` Now, we have grouped these values under a single struct: ``` canonical_head: CanonicalHead { cached_head: RwLock<Arc<Snapshot>>, fork_choice: RwLock<BeaconForkChoice> } ``` Apart from ergonomics, the only *actual* change here is wrapping the canonical head snapshot in an `Arc`. This means that we no longer need to hold the `cached_head` (`canonical_head`, in old terms) lock when we want to pull some values from it. This was done to avoid deadlock risks by preventing functions from acquiring (and holding) the `cached_head` and `fork_choice` locks simultaneously. ## Breaking Changes ### The `state` (root) field in the `finalized_checkpoint` SSE event Consider the scenario where epoch `n` is just finalized, but `start_slot(n)` is skipped. There are two state roots we might in the `finalized_checkpoint` SSE event: 1. The state root of the finalized block, which is `get_block(finalized_checkpoint.root).state_root`. 4. The state root at slot of `start_slot(n)`, which would be the state from (1), but "skipped forward" through any skip slots. Previously, Lighthouse would choose (2). However, we can see that when [Teku generates that event](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/beaconrestapi/src/main/java/tech/pegasys/teku/beaconrestapi/handlers/v1/events/EventSubscriptionManager.java#L171-L182) it uses [`getStateRootFromBlockRoot`](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/provider/src/main/java/tech/pegasys/teku/api/ChainDataProvider.java#L336-L341) which uses (1). I have switched Lighthouse from (2) to (1). I think it's a somewhat arbitrary choice between the two, where (1) is easier to compute and is consistent with Teku. ## Notes for Reviewers I've renamed `BeaconChain::fork_choice` to `BeaconChain::recompute_head`. Doing this helped ensure I broke all previous uses of fork choice and I also find it more descriptive. It describes an action and can't be confused with trying to get a reference to the `ForkChoice` struct. I've changed the ordering of SSE events when a block is received. It used to be `[block, finalized, head]` and now it's `[block, head, finalized]`. It was easier this way and I don't think we were making any promises about SSE event ordering so it's not "breaking". I've made it so fork choice will run when it's first constructed. I did this because I wanted to have a cached version of the last call to `get_head`. Ensuring `get_head` has been run *at least once* means that the cached values doesn't need to wrapped in an `Option`. This was fairly simple, it just involved passing a `slot` to the constructor so it knows *when* it's being run. When loading a fork choice from the store and a slot clock isn't handy I've just used the `slot` that was saved in the `fork_choice_store`. That seems like it would be a faithful representation of the slot when we saved it. I added the `genesis_time: u64` to the `BeaconChain`. It's small, constant and nice to have around. Since we're using FC for the fin/just checkpoints, we no longer get the `0x00..00` roots at genesis. You can see I had to remove a work-around in `ef-tests` here: b56be3bc2. I can't find any reason why this would be an issue, if anything I think it'll be better since the genesis-alias has caught us out a few times (0x00..00 isn't actually a real root). Edit: I did find a case where the `network` expected the 0x00..00 alias and patched it here: 3f26ac3e2. You'll notice a lot of changes in tests. Generally, tests should be functionally equivalent. Here are the things creating the most diff-noise in tests: - Changing tests to be `tokio::async` tests. - Adding `.await` to fork choice, block processing and block production functions. - Refactor of the `canonical_head` "API" provided by the `BeaconChain`. E.g., `chain.canonical_head.cached_head()` instead of `chain.canonical_head.read()`. - Wrapping `SignedBeaconBlock` in an `Arc`. - In the `beacon_chain/tests/block_verification`, we can't use the `lazy_static` `CHAIN_SEGMENT` variable anymore since it's generated with an async function. We just generate it in each test, not so efficient but hopefully insignificant. I had to disable `rayon` concurrent tests in the `fork_choice` tests. This is because the use of `rayon` and `block_on` was causing a panic. Co-authored-by: Mac L <mjladson@pm.me>
2022-07-03 05:36:50 +00:00
let block = &harness.chain.head_snapshot().beacon_block;
let execution_payload = block.message().body().execution_payload().unwrap().clone();
if i == 0 {
assert_eq!(execution_payload.block_hash(), genesis_pow_block_hash);
}
execution_payloads.push(execution_payload);
}
verify_execution_payload_chain(execution_payloads.as_slice());
}
Use async code when interacting with EL (#3244) ## Overview This rather extensive PR achieves two primary goals: 1. Uses the finalized/justified checkpoints of fork choice (FC), rather than that of the head state. 2. Refactors fork choice, block production and block processing to `async` functions. Additionally, it achieves: - Concurrent forkchoice updates to the EL and cache pruning after a new head is selected. - Concurrent "block packing" (attestations, etc) and execution payload retrieval during block production. - Concurrent per-block-processing and execution payload verification during block processing. - The `Arc`-ification of `SignedBeaconBlock` during block processing (it's never mutated, so why not?): - I had to do this to deal with sending blocks into spawned tasks. - Previously we were cloning the beacon block at least 2 times during each block processing, these clones are either removed or turned into cheaper `Arc` clones. - We were also `Box`-ing and un-`Box`-ing beacon blocks as they moved throughout the networking crate. This is not a big deal, but it's nice to avoid shifting things between the stack and heap. - Avoids cloning *all the blocks* in *every chain segment* during sync. - It also has the potential to clean up our code where we need to pass an *owned* block around so we can send it back in the case of an error (I didn't do much of this, my PR is already big enough :sweat_smile:) - The `BeaconChain::HeadSafetyStatus` struct was removed. It was an old relic from prior merge specs. For motivation for this change, see https://github.com/sigp/lighthouse/pull/3244#issuecomment-1160963273 ## Changes to `canonical_head` and `fork_choice` Previously, the `BeaconChain` had two separate fields: ``` canonical_head: RwLock<Snapshot>, fork_choice: RwLock<BeaconForkChoice> ``` Now, we have grouped these values under a single struct: ``` canonical_head: CanonicalHead { cached_head: RwLock<Arc<Snapshot>>, fork_choice: RwLock<BeaconForkChoice> } ``` Apart from ergonomics, the only *actual* change here is wrapping the canonical head snapshot in an `Arc`. This means that we no longer need to hold the `cached_head` (`canonical_head`, in old terms) lock when we want to pull some values from it. This was done to avoid deadlock risks by preventing functions from acquiring (and holding) the `cached_head` and `fork_choice` locks simultaneously. ## Breaking Changes ### The `state` (root) field in the `finalized_checkpoint` SSE event Consider the scenario where epoch `n` is just finalized, but `start_slot(n)` is skipped. There are two state roots we might in the `finalized_checkpoint` SSE event: 1. The state root of the finalized block, which is `get_block(finalized_checkpoint.root).state_root`. 4. The state root at slot of `start_slot(n)`, which would be the state from (1), but "skipped forward" through any skip slots. Previously, Lighthouse would choose (2). However, we can see that when [Teku generates that event](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/beaconrestapi/src/main/java/tech/pegasys/teku/beaconrestapi/handlers/v1/events/EventSubscriptionManager.java#L171-L182) it uses [`getStateRootFromBlockRoot`](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/provider/src/main/java/tech/pegasys/teku/api/ChainDataProvider.java#L336-L341) which uses (1). I have switched Lighthouse from (2) to (1). I think it's a somewhat arbitrary choice between the two, where (1) is easier to compute and is consistent with Teku. ## Notes for Reviewers I've renamed `BeaconChain::fork_choice` to `BeaconChain::recompute_head`. Doing this helped ensure I broke all previous uses of fork choice and I also find it more descriptive. It describes an action and can't be confused with trying to get a reference to the `ForkChoice` struct. I've changed the ordering of SSE events when a block is received. It used to be `[block, finalized, head]` and now it's `[block, head, finalized]`. It was easier this way and I don't think we were making any promises about SSE event ordering so it's not "breaking". I've made it so fork choice will run when it's first constructed. I did this because I wanted to have a cached version of the last call to `get_head`. Ensuring `get_head` has been run *at least once* means that the cached values doesn't need to wrapped in an `Option`. This was fairly simple, it just involved passing a `slot` to the constructor so it knows *when* it's being run. When loading a fork choice from the store and a slot clock isn't handy I've just used the `slot` that was saved in the `fork_choice_store`. That seems like it would be a faithful representation of the slot when we saved it. I added the `genesis_time: u64` to the `BeaconChain`. It's small, constant and nice to have around. Since we're using FC for the fin/just checkpoints, we no longer get the `0x00..00` roots at genesis. You can see I had to remove a work-around in `ef-tests` here: b56be3bc2. I can't find any reason why this would be an issue, if anything I think it'll be better since the genesis-alias has caught us out a few times (0x00..00 isn't actually a real root). Edit: I did find a case where the `network` expected the 0x00..00 alias and patched it here: 3f26ac3e2. You'll notice a lot of changes in tests. Generally, tests should be functionally equivalent. Here are the things creating the most diff-noise in tests: - Changing tests to be `tokio::async` tests. - Adding `.await` to fork choice, block processing and block production functions. - Refactor of the `canonical_head` "API" provided by the `BeaconChain`. E.g., `chain.canonical_head.cached_head()` instead of `chain.canonical_head.read()`. - Wrapping `SignedBeaconBlock` in an `Arc`. - In the `beacon_chain/tests/block_verification`, we can't use the `lazy_static` `CHAIN_SEGMENT` variable anymore since it's generated with an async function. We just generate it in each test, not so efficient but hopefully insignificant. I had to disable `rayon` concurrent tests in the `fork_choice` tests. This is because the use of `rayon` and `block_on` was causing a panic. Co-authored-by: Mac L <mjladson@pm.me>
2022-07-03 05:36:50 +00:00
#[tokio::test]
async fn base_altair_merge_with_terminal_block_after_fork() {
let altair_fork_epoch = Epoch::new(4);
let altair_fork_slot = altair_fork_epoch.start_slot(E::slots_per_epoch());
let bellatrix_fork_epoch = Epoch::new(8);
let merge_fork_slot = bellatrix_fork_epoch.start_slot(E::slots_per_epoch());
let mut spec = E::default_spec();
spec.altair_fork_epoch = Some(altair_fork_epoch);
spec.bellatrix_fork_epoch = Some(bellatrix_fork_epoch);
let mut execution_payloads = vec![];
let harness = BeaconChainHarness::builder(E::default())
.spec(spec)
Enable proposer boost re-orging (#2860) ## Proposed Changes With proposer boosting implemented (#2822) we have an opportunity to re-org out late blocks. This PR adds three flags to the BN to control this behaviour: * `--disable-proposer-reorgs`: turn aggressive re-orging off (it's on by default). * `--proposer-reorg-threshold N`: attempt to orphan blocks with less than N% of the committee vote. If this parameter isn't set then N defaults to 20% when the feature is enabled. * `--proposer-reorg-epochs-since-finalization N`: only attempt to re-org late blocks when the number of epochs since finalization is less than or equal to N. The default is 2 epochs, meaning re-orgs will only be attempted when the chain is finalizing optimally. For safety Lighthouse will only attempt a re-org under very specific conditions: 1. The block being proposed is 1 slot after the canonical head, and the canonical head is 1 slot after its parent. i.e. at slot `n + 1` rather than building on the block from slot `n` we build on the block from slot `n - 1`. 2. The current canonical head received less than N% of the committee vote. N should be set depending on the proposer boost fraction itself, the fraction of the network that is believed to be applying it, and the size of the largest entity that could be hoarding votes. 3. The current canonical head arrived after the attestation deadline from our perspective. This condition was only added to support suppression of forkchoiceUpdated messages, but makes intuitive sense. 4. The block is being proposed in the first 2 seconds of the slot. This gives it time to propagate and receive the proposer boost. ## Additional Info For the initial idea and background, see: https://github.com/ethereum/consensus-specs/pull/2353#issuecomment-950238004 There is also a specification for this feature here: https://github.com/ethereum/consensus-specs/pull/3034 Co-authored-by: Michael Sproul <micsproul@gmail.com> Co-authored-by: pawan <pawandhananjay@gmail.com>
2022-12-13 09:57:26 +00:00
.logger(logging::test_logger())
.deterministic_keypairs(VALIDATOR_COUNT)
.fresh_ephemeral_store()
.mock_execution_layer()
.build();
/*
* Start with the base fork.
*/
Use async code when interacting with EL (#3244) ## Overview This rather extensive PR achieves two primary goals: 1. Uses the finalized/justified checkpoints of fork choice (FC), rather than that of the head state. 2. Refactors fork choice, block production and block processing to `async` functions. Additionally, it achieves: - Concurrent forkchoice updates to the EL and cache pruning after a new head is selected. - Concurrent "block packing" (attestations, etc) and execution payload retrieval during block production. - Concurrent per-block-processing and execution payload verification during block processing. - The `Arc`-ification of `SignedBeaconBlock` during block processing (it's never mutated, so why not?): - I had to do this to deal with sending blocks into spawned tasks. - Previously we were cloning the beacon block at least 2 times during each block processing, these clones are either removed or turned into cheaper `Arc` clones. - We were also `Box`-ing and un-`Box`-ing beacon blocks as they moved throughout the networking crate. This is not a big deal, but it's nice to avoid shifting things between the stack and heap. - Avoids cloning *all the blocks* in *every chain segment* during sync. - It also has the potential to clean up our code where we need to pass an *owned* block around so we can send it back in the case of an error (I didn't do much of this, my PR is already big enough :sweat_smile:) - The `BeaconChain::HeadSafetyStatus` struct was removed. It was an old relic from prior merge specs. For motivation for this change, see https://github.com/sigp/lighthouse/pull/3244#issuecomment-1160963273 ## Changes to `canonical_head` and `fork_choice` Previously, the `BeaconChain` had two separate fields: ``` canonical_head: RwLock<Snapshot>, fork_choice: RwLock<BeaconForkChoice> ``` Now, we have grouped these values under a single struct: ``` canonical_head: CanonicalHead { cached_head: RwLock<Arc<Snapshot>>, fork_choice: RwLock<BeaconForkChoice> } ``` Apart from ergonomics, the only *actual* change here is wrapping the canonical head snapshot in an `Arc`. This means that we no longer need to hold the `cached_head` (`canonical_head`, in old terms) lock when we want to pull some values from it. This was done to avoid deadlock risks by preventing functions from acquiring (and holding) the `cached_head` and `fork_choice` locks simultaneously. ## Breaking Changes ### The `state` (root) field in the `finalized_checkpoint` SSE event Consider the scenario where epoch `n` is just finalized, but `start_slot(n)` is skipped. There are two state roots we might in the `finalized_checkpoint` SSE event: 1. The state root of the finalized block, which is `get_block(finalized_checkpoint.root).state_root`. 4. The state root at slot of `start_slot(n)`, which would be the state from (1), but "skipped forward" through any skip slots. Previously, Lighthouse would choose (2). However, we can see that when [Teku generates that event](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/beaconrestapi/src/main/java/tech/pegasys/teku/beaconrestapi/handlers/v1/events/EventSubscriptionManager.java#L171-L182) it uses [`getStateRootFromBlockRoot`](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/provider/src/main/java/tech/pegasys/teku/api/ChainDataProvider.java#L336-L341) which uses (1). I have switched Lighthouse from (2) to (1). I think it's a somewhat arbitrary choice between the two, where (1) is easier to compute and is consistent with Teku. ## Notes for Reviewers I've renamed `BeaconChain::fork_choice` to `BeaconChain::recompute_head`. Doing this helped ensure I broke all previous uses of fork choice and I also find it more descriptive. It describes an action and can't be confused with trying to get a reference to the `ForkChoice` struct. I've changed the ordering of SSE events when a block is received. It used to be `[block, finalized, head]` and now it's `[block, head, finalized]`. It was easier this way and I don't think we were making any promises about SSE event ordering so it's not "breaking". I've made it so fork choice will run when it's first constructed. I did this because I wanted to have a cached version of the last call to `get_head`. Ensuring `get_head` has been run *at least once* means that the cached values doesn't need to wrapped in an `Option`. This was fairly simple, it just involved passing a `slot` to the constructor so it knows *when* it's being run. When loading a fork choice from the store and a slot clock isn't handy I've just used the `slot` that was saved in the `fork_choice_store`. That seems like it would be a faithful representation of the slot when we saved it. I added the `genesis_time: u64` to the `BeaconChain`. It's small, constant and nice to have around. Since we're using FC for the fin/just checkpoints, we no longer get the `0x00..00` roots at genesis. You can see I had to remove a work-around in `ef-tests` here: b56be3bc2. I can't find any reason why this would be an issue, if anything I think it'll be better since the genesis-alias has caught us out a few times (0x00..00 isn't actually a real root). Edit: I did find a case where the `network` expected the 0x00..00 alias and patched it here: 3f26ac3e2. You'll notice a lot of changes in tests. Generally, tests should be functionally equivalent. Here are the things creating the most diff-noise in tests: - Changing tests to be `tokio::async` tests. - Adding `.await` to fork choice, block processing and block production functions. - Refactor of the `canonical_head` "API" provided by the `BeaconChain`. E.g., `chain.canonical_head.cached_head()` instead of `chain.canonical_head.read()`. - Wrapping `SignedBeaconBlock` in an `Arc`. - In the `beacon_chain/tests/block_verification`, we can't use the `lazy_static` `CHAIN_SEGMENT` variable anymore since it's generated with an async function. We just generate it in each test, not so efficient but hopefully insignificant. I had to disable `rayon` concurrent tests in the `fork_choice` tests. This is because the use of `rayon` and `block_on` was causing a panic. Co-authored-by: Mac L <mjladson@pm.me>
2022-07-03 05:36:50 +00:00
assert!(harness.chain.head_snapshot().beacon_block.as_base().is_ok());
/*
* Do the Altair fork.
*/
Use async code when interacting with EL (#3244) ## Overview This rather extensive PR achieves two primary goals: 1. Uses the finalized/justified checkpoints of fork choice (FC), rather than that of the head state. 2. Refactors fork choice, block production and block processing to `async` functions. Additionally, it achieves: - Concurrent forkchoice updates to the EL and cache pruning after a new head is selected. - Concurrent "block packing" (attestations, etc) and execution payload retrieval during block production. - Concurrent per-block-processing and execution payload verification during block processing. - The `Arc`-ification of `SignedBeaconBlock` during block processing (it's never mutated, so why not?): - I had to do this to deal with sending blocks into spawned tasks. - Previously we were cloning the beacon block at least 2 times during each block processing, these clones are either removed or turned into cheaper `Arc` clones. - We were also `Box`-ing and un-`Box`-ing beacon blocks as they moved throughout the networking crate. This is not a big deal, but it's nice to avoid shifting things between the stack and heap. - Avoids cloning *all the blocks* in *every chain segment* during sync. - It also has the potential to clean up our code where we need to pass an *owned* block around so we can send it back in the case of an error (I didn't do much of this, my PR is already big enough :sweat_smile:) - The `BeaconChain::HeadSafetyStatus` struct was removed. It was an old relic from prior merge specs. For motivation for this change, see https://github.com/sigp/lighthouse/pull/3244#issuecomment-1160963273 ## Changes to `canonical_head` and `fork_choice` Previously, the `BeaconChain` had two separate fields: ``` canonical_head: RwLock<Snapshot>, fork_choice: RwLock<BeaconForkChoice> ``` Now, we have grouped these values under a single struct: ``` canonical_head: CanonicalHead { cached_head: RwLock<Arc<Snapshot>>, fork_choice: RwLock<BeaconForkChoice> } ``` Apart from ergonomics, the only *actual* change here is wrapping the canonical head snapshot in an `Arc`. This means that we no longer need to hold the `cached_head` (`canonical_head`, in old terms) lock when we want to pull some values from it. This was done to avoid deadlock risks by preventing functions from acquiring (and holding) the `cached_head` and `fork_choice` locks simultaneously. ## Breaking Changes ### The `state` (root) field in the `finalized_checkpoint` SSE event Consider the scenario where epoch `n` is just finalized, but `start_slot(n)` is skipped. There are two state roots we might in the `finalized_checkpoint` SSE event: 1. The state root of the finalized block, which is `get_block(finalized_checkpoint.root).state_root`. 4. The state root at slot of `start_slot(n)`, which would be the state from (1), but "skipped forward" through any skip slots. Previously, Lighthouse would choose (2). However, we can see that when [Teku generates that event](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/beaconrestapi/src/main/java/tech/pegasys/teku/beaconrestapi/handlers/v1/events/EventSubscriptionManager.java#L171-L182) it uses [`getStateRootFromBlockRoot`](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/provider/src/main/java/tech/pegasys/teku/api/ChainDataProvider.java#L336-L341) which uses (1). I have switched Lighthouse from (2) to (1). I think it's a somewhat arbitrary choice between the two, where (1) is easier to compute and is consistent with Teku. ## Notes for Reviewers I've renamed `BeaconChain::fork_choice` to `BeaconChain::recompute_head`. Doing this helped ensure I broke all previous uses of fork choice and I also find it more descriptive. It describes an action and can't be confused with trying to get a reference to the `ForkChoice` struct. I've changed the ordering of SSE events when a block is received. It used to be `[block, finalized, head]` and now it's `[block, head, finalized]`. It was easier this way and I don't think we were making any promises about SSE event ordering so it's not "breaking". I've made it so fork choice will run when it's first constructed. I did this because I wanted to have a cached version of the last call to `get_head`. Ensuring `get_head` has been run *at least once* means that the cached values doesn't need to wrapped in an `Option`. This was fairly simple, it just involved passing a `slot` to the constructor so it knows *when* it's being run. When loading a fork choice from the store and a slot clock isn't handy I've just used the `slot` that was saved in the `fork_choice_store`. That seems like it would be a faithful representation of the slot when we saved it. I added the `genesis_time: u64` to the `BeaconChain`. It's small, constant and nice to have around. Since we're using FC for the fin/just checkpoints, we no longer get the `0x00..00` roots at genesis. You can see I had to remove a work-around in `ef-tests` here: b56be3bc2. I can't find any reason why this would be an issue, if anything I think it'll be better since the genesis-alias has caught us out a few times (0x00..00 isn't actually a real root). Edit: I did find a case where the `network` expected the 0x00..00 alias and patched it here: 3f26ac3e2. You'll notice a lot of changes in tests. Generally, tests should be functionally equivalent. Here are the things creating the most diff-noise in tests: - Changing tests to be `tokio::async` tests. - Adding `.await` to fork choice, block processing and block production functions. - Refactor of the `canonical_head` "API" provided by the `BeaconChain`. E.g., `chain.canonical_head.cached_head()` instead of `chain.canonical_head.read()`. - Wrapping `SignedBeaconBlock` in an `Arc`. - In the `beacon_chain/tests/block_verification`, we can't use the `lazy_static` `CHAIN_SEGMENT` variable anymore since it's generated with an async function. We just generate it in each test, not so efficient but hopefully insignificant. I had to disable `rayon` concurrent tests in the `fork_choice` tests. This is because the use of `rayon` and `block_on` was causing a panic. Co-authored-by: Mac L <mjladson@pm.me>
2022-07-03 05:36:50 +00:00
harness.extend_to_slot(altair_fork_slot).await;
Use async code when interacting with EL (#3244) ## Overview This rather extensive PR achieves two primary goals: 1. Uses the finalized/justified checkpoints of fork choice (FC), rather than that of the head state. 2. Refactors fork choice, block production and block processing to `async` functions. Additionally, it achieves: - Concurrent forkchoice updates to the EL and cache pruning after a new head is selected. - Concurrent "block packing" (attestations, etc) and execution payload retrieval during block production. - Concurrent per-block-processing and execution payload verification during block processing. - The `Arc`-ification of `SignedBeaconBlock` during block processing (it's never mutated, so why not?): - I had to do this to deal with sending blocks into spawned tasks. - Previously we were cloning the beacon block at least 2 times during each block processing, these clones are either removed or turned into cheaper `Arc` clones. - We were also `Box`-ing and un-`Box`-ing beacon blocks as they moved throughout the networking crate. This is not a big deal, but it's nice to avoid shifting things between the stack and heap. - Avoids cloning *all the blocks* in *every chain segment* during sync. - It also has the potential to clean up our code where we need to pass an *owned* block around so we can send it back in the case of an error (I didn't do much of this, my PR is already big enough :sweat_smile:) - The `BeaconChain::HeadSafetyStatus` struct was removed. It was an old relic from prior merge specs. For motivation for this change, see https://github.com/sigp/lighthouse/pull/3244#issuecomment-1160963273 ## Changes to `canonical_head` and `fork_choice` Previously, the `BeaconChain` had two separate fields: ``` canonical_head: RwLock<Snapshot>, fork_choice: RwLock<BeaconForkChoice> ``` Now, we have grouped these values under a single struct: ``` canonical_head: CanonicalHead { cached_head: RwLock<Arc<Snapshot>>, fork_choice: RwLock<BeaconForkChoice> } ``` Apart from ergonomics, the only *actual* change here is wrapping the canonical head snapshot in an `Arc`. This means that we no longer need to hold the `cached_head` (`canonical_head`, in old terms) lock when we want to pull some values from it. This was done to avoid deadlock risks by preventing functions from acquiring (and holding) the `cached_head` and `fork_choice` locks simultaneously. ## Breaking Changes ### The `state` (root) field in the `finalized_checkpoint` SSE event Consider the scenario where epoch `n` is just finalized, but `start_slot(n)` is skipped. There are two state roots we might in the `finalized_checkpoint` SSE event: 1. The state root of the finalized block, which is `get_block(finalized_checkpoint.root).state_root`. 4. The state root at slot of `start_slot(n)`, which would be the state from (1), but "skipped forward" through any skip slots. Previously, Lighthouse would choose (2). However, we can see that when [Teku generates that event](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/beaconrestapi/src/main/java/tech/pegasys/teku/beaconrestapi/handlers/v1/events/EventSubscriptionManager.java#L171-L182) it uses [`getStateRootFromBlockRoot`](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/provider/src/main/java/tech/pegasys/teku/api/ChainDataProvider.java#L336-L341) which uses (1). I have switched Lighthouse from (2) to (1). I think it's a somewhat arbitrary choice between the two, where (1) is easier to compute and is consistent with Teku. ## Notes for Reviewers I've renamed `BeaconChain::fork_choice` to `BeaconChain::recompute_head`. Doing this helped ensure I broke all previous uses of fork choice and I also find it more descriptive. It describes an action and can't be confused with trying to get a reference to the `ForkChoice` struct. I've changed the ordering of SSE events when a block is received. It used to be `[block, finalized, head]` and now it's `[block, head, finalized]`. It was easier this way and I don't think we were making any promises about SSE event ordering so it's not "breaking". I've made it so fork choice will run when it's first constructed. I did this because I wanted to have a cached version of the last call to `get_head`. Ensuring `get_head` has been run *at least once* means that the cached values doesn't need to wrapped in an `Option`. This was fairly simple, it just involved passing a `slot` to the constructor so it knows *when* it's being run. When loading a fork choice from the store and a slot clock isn't handy I've just used the `slot` that was saved in the `fork_choice_store`. That seems like it would be a faithful representation of the slot when we saved it. I added the `genesis_time: u64` to the `BeaconChain`. It's small, constant and nice to have around. Since we're using FC for the fin/just checkpoints, we no longer get the `0x00..00` roots at genesis. You can see I had to remove a work-around in `ef-tests` here: b56be3bc2. I can't find any reason why this would be an issue, if anything I think it'll be better since the genesis-alias has caught us out a few times (0x00..00 isn't actually a real root). Edit: I did find a case where the `network` expected the 0x00..00 alias and patched it here: 3f26ac3e2. You'll notice a lot of changes in tests. Generally, tests should be functionally equivalent. Here are the things creating the most diff-noise in tests: - Changing tests to be `tokio::async` tests. - Adding `.await` to fork choice, block processing and block production functions. - Refactor of the `canonical_head` "API" provided by the `BeaconChain`. E.g., `chain.canonical_head.cached_head()` instead of `chain.canonical_head.read()`. - Wrapping `SignedBeaconBlock` in an `Arc`. - In the `beacon_chain/tests/block_verification`, we can't use the `lazy_static` `CHAIN_SEGMENT` variable anymore since it's generated with an async function. We just generate it in each test, not so efficient but hopefully insignificant. I had to disable `rayon` concurrent tests in the `fork_choice` tests. This is because the use of `rayon` and `block_on` was causing a panic. Co-authored-by: Mac L <mjladson@pm.me>
2022-07-03 05:36:50 +00:00
let altair_head = &harness.chain.head_snapshot().beacon_block;
assert!(altair_head.as_altair().is_ok());
assert_eq!(altair_head.slot(), altair_fork_slot);
/*
* Do the merge fork, without a terminal PoW block.
*/
Use async code when interacting with EL (#3244) ## Overview This rather extensive PR achieves two primary goals: 1. Uses the finalized/justified checkpoints of fork choice (FC), rather than that of the head state. 2. Refactors fork choice, block production and block processing to `async` functions. Additionally, it achieves: - Concurrent forkchoice updates to the EL and cache pruning after a new head is selected. - Concurrent "block packing" (attestations, etc) and execution payload retrieval during block production. - Concurrent per-block-processing and execution payload verification during block processing. - The `Arc`-ification of `SignedBeaconBlock` during block processing (it's never mutated, so why not?): - I had to do this to deal with sending blocks into spawned tasks. - Previously we were cloning the beacon block at least 2 times during each block processing, these clones are either removed or turned into cheaper `Arc` clones. - We were also `Box`-ing and un-`Box`-ing beacon blocks as they moved throughout the networking crate. This is not a big deal, but it's nice to avoid shifting things between the stack and heap. - Avoids cloning *all the blocks* in *every chain segment* during sync. - It also has the potential to clean up our code where we need to pass an *owned* block around so we can send it back in the case of an error (I didn't do much of this, my PR is already big enough :sweat_smile:) - The `BeaconChain::HeadSafetyStatus` struct was removed. It was an old relic from prior merge specs. For motivation for this change, see https://github.com/sigp/lighthouse/pull/3244#issuecomment-1160963273 ## Changes to `canonical_head` and `fork_choice` Previously, the `BeaconChain` had two separate fields: ``` canonical_head: RwLock<Snapshot>, fork_choice: RwLock<BeaconForkChoice> ``` Now, we have grouped these values under a single struct: ``` canonical_head: CanonicalHead { cached_head: RwLock<Arc<Snapshot>>, fork_choice: RwLock<BeaconForkChoice> } ``` Apart from ergonomics, the only *actual* change here is wrapping the canonical head snapshot in an `Arc`. This means that we no longer need to hold the `cached_head` (`canonical_head`, in old terms) lock when we want to pull some values from it. This was done to avoid deadlock risks by preventing functions from acquiring (and holding) the `cached_head` and `fork_choice` locks simultaneously. ## Breaking Changes ### The `state` (root) field in the `finalized_checkpoint` SSE event Consider the scenario where epoch `n` is just finalized, but `start_slot(n)` is skipped. There are two state roots we might in the `finalized_checkpoint` SSE event: 1. The state root of the finalized block, which is `get_block(finalized_checkpoint.root).state_root`. 4. The state root at slot of `start_slot(n)`, which would be the state from (1), but "skipped forward" through any skip slots. Previously, Lighthouse would choose (2). However, we can see that when [Teku generates that event](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/beaconrestapi/src/main/java/tech/pegasys/teku/beaconrestapi/handlers/v1/events/EventSubscriptionManager.java#L171-L182) it uses [`getStateRootFromBlockRoot`](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/provider/src/main/java/tech/pegasys/teku/api/ChainDataProvider.java#L336-L341) which uses (1). I have switched Lighthouse from (2) to (1). I think it's a somewhat arbitrary choice between the two, where (1) is easier to compute and is consistent with Teku. ## Notes for Reviewers I've renamed `BeaconChain::fork_choice` to `BeaconChain::recompute_head`. Doing this helped ensure I broke all previous uses of fork choice and I also find it more descriptive. It describes an action and can't be confused with trying to get a reference to the `ForkChoice` struct. I've changed the ordering of SSE events when a block is received. It used to be `[block, finalized, head]` and now it's `[block, head, finalized]`. It was easier this way and I don't think we were making any promises about SSE event ordering so it's not "breaking". I've made it so fork choice will run when it's first constructed. I did this because I wanted to have a cached version of the last call to `get_head`. Ensuring `get_head` has been run *at least once* means that the cached values doesn't need to wrapped in an `Option`. This was fairly simple, it just involved passing a `slot` to the constructor so it knows *when* it's being run. When loading a fork choice from the store and a slot clock isn't handy I've just used the `slot` that was saved in the `fork_choice_store`. That seems like it would be a faithful representation of the slot when we saved it. I added the `genesis_time: u64` to the `BeaconChain`. It's small, constant and nice to have around. Since we're using FC for the fin/just checkpoints, we no longer get the `0x00..00` roots at genesis. You can see I had to remove a work-around in `ef-tests` here: b56be3bc2. I can't find any reason why this would be an issue, if anything I think it'll be better since the genesis-alias has caught us out a few times (0x00..00 isn't actually a real root). Edit: I did find a case where the `network` expected the 0x00..00 alias and patched it here: 3f26ac3e2. You'll notice a lot of changes in tests. Generally, tests should be functionally equivalent. Here are the things creating the most diff-noise in tests: - Changing tests to be `tokio::async` tests. - Adding `.await` to fork choice, block processing and block production functions. - Refactor of the `canonical_head` "API" provided by the `BeaconChain`. E.g., `chain.canonical_head.cached_head()` instead of `chain.canonical_head.read()`. - Wrapping `SignedBeaconBlock` in an `Arc`. - In the `beacon_chain/tests/block_verification`, we can't use the `lazy_static` `CHAIN_SEGMENT` variable anymore since it's generated with an async function. We just generate it in each test, not so efficient but hopefully insignificant. I had to disable `rayon` concurrent tests in the `fork_choice` tests. This is because the use of `rayon` and `block_on` was causing a panic. Co-authored-by: Mac L <mjladson@pm.me>
2022-07-03 05:36:50 +00:00
harness.extend_to_slot(merge_fork_slot).await;
Use async code when interacting with EL (#3244) ## Overview This rather extensive PR achieves two primary goals: 1. Uses the finalized/justified checkpoints of fork choice (FC), rather than that of the head state. 2. Refactors fork choice, block production and block processing to `async` functions. Additionally, it achieves: - Concurrent forkchoice updates to the EL and cache pruning after a new head is selected. - Concurrent "block packing" (attestations, etc) and execution payload retrieval during block production. - Concurrent per-block-processing and execution payload verification during block processing. - The `Arc`-ification of `SignedBeaconBlock` during block processing (it's never mutated, so why not?): - I had to do this to deal with sending blocks into spawned tasks. - Previously we were cloning the beacon block at least 2 times during each block processing, these clones are either removed or turned into cheaper `Arc` clones. - We were also `Box`-ing and un-`Box`-ing beacon blocks as they moved throughout the networking crate. This is not a big deal, but it's nice to avoid shifting things between the stack and heap. - Avoids cloning *all the blocks* in *every chain segment* during sync. - It also has the potential to clean up our code where we need to pass an *owned* block around so we can send it back in the case of an error (I didn't do much of this, my PR is already big enough :sweat_smile:) - The `BeaconChain::HeadSafetyStatus` struct was removed. It was an old relic from prior merge specs. For motivation for this change, see https://github.com/sigp/lighthouse/pull/3244#issuecomment-1160963273 ## Changes to `canonical_head` and `fork_choice` Previously, the `BeaconChain` had two separate fields: ``` canonical_head: RwLock<Snapshot>, fork_choice: RwLock<BeaconForkChoice> ``` Now, we have grouped these values under a single struct: ``` canonical_head: CanonicalHead { cached_head: RwLock<Arc<Snapshot>>, fork_choice: RwLock<BeaconForkChoice> } ``` Apart from ergonomics, the only *actual* change here is wrapping the canonical head snapshot in an `Arc`. This means that we no longer need to hold the `cached_head` (`canonical_head`, in old terms) lock when we want to pull some values from it. This was done to avoid deadlock risks by preventing functions from acquiring (and holding) the `cached_head` and `fork_choice` locks simultaneously. ## Breaking Changes ### The `state` (root) field in the `finalized_checkpoint` SSE event Consider the scenario where epoch `n` is just finalized, but `start_slot(n)` is skipped. There are two state roots we might in the `finalized_checkpoint` SSE event: 1. The state root of the finalized block, which is `get_block(finalized_checkpoint.root).state_root`. 4. The state root at slot of `start_slot(n)`, which would be the state from (1), but "skipped forward" through any skip slots. Previously, Lighthouse would choose (2). However, we can see that when [Teku generates that event](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/beaconrestapi/src/main/java/tech/pegasys/teku/beaconrestapi/handlers/v1/events/EventSubscriptionManager.java#L171-L182) it uses [`getStateRootFromBlockRoot`](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/provider/src/main/java/tech/pegasys/teku/api/ChainDataProvider.java#L336-L341) which uses (1). I have switched Lighthouse from (2) to (1). I think it's a somewhat arbitrary choice between the two, where (1) is easier to compute and is consistent with Teku. ## Notes for Reviewers I've renamed `BeaconChain::fork_choice` to `BeaconChain::recompute_head`. Doing this helped ensure I broke all previous uses of fork choice and I also find it more descriptive. It describes an action and can't be confused with trying to get a reference to the `ForkChoice` struct. I've changed the ordering of SSE events when a block is received. It used to be `[block, finalized, head]` and now it's `[block, head, finalized]`. It was easier this way and I don't think we were making any promises about SSE event ordering so it's not "breaking". I've made it so fork choice will run when it's first constructed. I did this because I wanted to have a cached version of the last call to `get_head`. Ensuring `get_head` has been run *at least once* means that the cached values doesn't need to wrapped in an `Option`. This was fairly simple, it just involved passing a `slot` to the constructor so it knows *when* it's being run. When loading a fork choice from the store and a slot clock isn't handy I've just used the `slot` that was saved in the `fork_choice_store`. That seems like it would be a faithful representation of the slot when we saved it. I added the `genesis_time: u64` to the `BeaconChain`. It's small, constant and nice to have around. Since we're using FC for the fin/just checkpoints, we no longer get the `0x00..00` roots at genesis. You can see I had to remove a work-around in `ef-tests` here: b56be3bc2. I can't find any reason why this would be an issue, if anything I think it'll be better since the genesis-alias has caught us out a few times (0x00..00 isn't actually a real root). Edit: I did find a case where the `network` expected the 0x00..00 alias and patched it here: 3f26ac3e2. You'll notice a lot of changes in tests. Generally, tests should be functionally equivalent. Here are the things creating the most diff-noise in tests: - Changing tests to be `tokio::async` tests. - Adding `.await` to fork choice, block processing and block production functions. - Refactor of the `canonical_head` "API" provided by the `BeaconChain`. E.g., `chain.canonical_head.cached_head()` instead of `chain.canonical_head.read()`. - Wrapping `SignedBeaconBlock` in an `Arc`. - In the `beacon_chain/tests/block_verification`, we can't use the `lazy_static` `CHAIN_SEGMENT` variable anymore since it's generated with an async function. We just generate it in each test, not so efficient but hopefully insignificant. I had to disable `rayon` concurrent tests in the `fork_choice` tests. This is because the use of `rayon` and `block_on` was causing a panic. Co-authored-by: Mac L <mjladson@pm.me>
2022-07-03 05:36:50 +00:00
let merge_head = &harness.chain.head_snapshot().beacon_block;
assert!(merge_head.as_merge().is_ok());
assert_eq!(merge_head.slot(), merge_fork_slot);
assert_eq!(
*merge_head.message().body().execution_payload().unwrap(),
FullPayload::default()
);
/*
* Next merge block shouldn't include an exec payload.
*/
Use async code when interacting with EL (#3244) ## Overview This rather extensive PR achieves two primary goals: 1. Uses the finalized/justified checkpoints of fork choice (FC), rather than that of the head state. 2. Refactors fork choice, block production and block processing to `async` functions. Additionally, it achieves: - Concurrent forkchoice updates to the EL and cache pruning after a new head is selected. - Concurrent "block packing" (attestations, etc) and execution payload retrieval during block production. - Concurrent per-block-processing and execution payload verification during block processing. - The `Arc`-ification of `SignedBeaconBlock` during block processing (it's never mutated, so why not?): - I had to do this to deal with sending blocks into spawned tasks. - Previously we were cloning the beacon block at least 2 times during each block processing, these clones are either removed or turned into cheaper `Arc` clones. - We were also `Box`-ing and un-`Box`-ing beacon blocks as they moved throughout the networking crate. This is not a big deal, but it's nice to avoid shifting things between the stack and heap. - Avoids cloning *all the blocks* in *every chain segment* during sync. - It also has the potential to clean up our code where we need to pass an *owned* block around so we can send it back in the case of an error (I didn't do much of this, my PR is already big enough :sweat_smile:) - The `BeaconChain::HeadSafetyStatus` struct was removed. It was an old relic from prior merge specs. For motivation for this change, see https://github.com/sigp/lighthouse/pull/3244#issuecomment-1160963273 ## Changes to `canonical_head` and `fork_choice` Previously, the `BeaconChain` had two separate fields: ``` canonical_head: RwLock<Snapshot>, fork_choice: RwLock<BeaconForkChoice> ``` Now, we have grouped these values under a single struct: ``` canonical_head: CanonicalHead { cached_head: RwLock<Arc<Snapshot>>, fork_choice: RwLock<BeaconForkChoice> } ``` Apart from ergonomics, the only *actual* change here is wrapping the canonical head snapshot in an `Arc`. This means that we no longer need to hold the `cached_head` (`canonical_head`, in old terms) lock when we want to pull some values from it. This was done to avoid deadlock risks by preventing functions from acquiring (and holding) the `cached_head` and `fork_choice` locks simultaneously. ## Breaking Changes ### The `state` (root) field in the `finalized_checkpoint` SSE event Consider the scenario where epoch `n` is just finalized, but `start_slot(n)` is skipped. There are two state roots we might in the `finalized_checkpoint` SSE event: 1. The state root of the finalized block, which is `get_block(finalized_checkpoint.root).state_root`. 4. The state root at slot of `start_slot(n)`, which would be the state from (1), but "skipped forward" through any skip slots. Previously, Lighthouse would choose (2). However, we can see that when [Teku generates that event](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/beaconrestapi/src/main/java/tech/pegasys/teku/beaconrestapi/handlers/v1/events/EventSubscriptionManager.java#L171-L182) it uses [`getStateRootFromBlockRoot`](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/provider/src/main/java/tech/pegasys/teku/api/ChainDataProvider.java#L336-L341) which uses (1). I have switched Lighthouse from (2) to (1). I think it's a somewhat arbitrary choice between the two, where (1) is easier to compute and is consistent with Teku. ## Notes for Reviewers I've renamed `BeaconChain::fork_choice` to `BeaconChain::recompute_head`. Doing this helped ensure I broke all previous uses of fork choice and I also find it more descriptive. It describes an action and can't be confused with trying to get a reference to the `ForkChoice` struct. I've changed the ordering of SSE events when a block is received. It used to be `[block, finalized, head]` and now it's `[block, head, finalized]`. It was easier this way and I don't think we were making any promises about SSE event ordering so it's not "breaking". I've made it so fork choice will run when it's first constructed. I did this because I wanted to have a cached version of the last call to `get_head`. Ensuring `get_head` has been run *at least once* means that the cached values doesn't need to wrapped in an `Option`. This was fairly simple, it just involved passing a `slot` to the constructor so it knows *when* it's being run. When loading a fork choice from the store and a slot clock isn't handy I've just used the `slot` that was saved in the `fork_choice_store`. That seems like it would be a faithful representation of the slot when we saved it. I added the `genesis_time: u64` to the `BeaconChain`. It's small, constant and nice to have around. Since we're using FC for the fin/just checkpoints, we no longer get the `0x00..00` roots at genesis. You can see I had to remove a work-around in `ef-tests` here: b56be3bc2. I can't find any reason why this would be an issue, if anything I think it'll be better since the genesis-alias has caught us out a few times (0x00..00 isn't actually a real root). Edit: I did find a case where the `network` expected the 0x00..00 alias and patched it here: 3f26ac3e2. You'll notice a lot of changes in tests. Generally, tests should be functionally equivalent. Here are the things creating the most diff-noise in tests: - Changing tests to be `tokio::async` tests. - Adding `.await` to fork choice, block processing and block production functions. - Refactor of the `canonical_head` "API" provided by the `BeaconChain`. E.g., `chain.canonical_head.cached_head()` instead of `chain.canonical_head.read()`. - Wrapping `SignedBeaconBlock` in an `Arc`. - In the `beacon_chain/tests/block_verification`, we can't use the `lazy_static` `CHAIN_SEGMENT` variable anymore since it's generated with an async function. We just generate it in each test, not so efficient but hopefully insignificant. I had to disable `rayon` concurrent tests in the `fork_choice` tests. This is because the use of `rayon` and `block_on` was causing a panic. Co-authored-by: Mac L <mjladson@pm.me>
2022-07-03 05:36:50 +00:00
harness.extend_slots(1).await;
Use async code when interacting with EL (#3244) ## Overview This rather extensive PR achieves two primary goals: 1. Uses the finalized/justified checkpoints of fork choice (FC), rather than that of the head state. 2. Refactors fork choice, block production and block processing to `async` functions. Additionally, it achieves: - Concurrent forkchoice updates to the EL and cache pruning after a new head is selected. - Concurrent "block packing" (attestations, etc) and execution payload retrieval during block production. - Concurrent per-block-processing and execution payload verification during block processing. - The `Arc`-ification of `SignedBeaconBlock` during block processing (it's never mutated, so why not?): - I had to do this to deal with sending blocks into spawned tasks. - Previously we were cloning the beacon block at least 2 times during each block processing, these clones are either removed or turned into cheaper `Arc` clones. - We were also `Box`-ing and un-`Box`-ing beacon blocks as they moved throughout the networking crate. This is not a big deal, but it's nice to avoid shifting things between the stack and heap. - Avoids cloning *all the blocks* in *every chain segment* during sync. - It also has the potential to clean up our code where we need to pass an *owned* block around so we can send it back in the case of an error (I didn't do much of this, my PR is already big enough :sweat_smile:) - The `BeaconChain::HeadSafetyStatus` struct was removed. It was an old relic from prior merge specs. For motivation for this change, see https://github.com/sigp/lighthouse/pull/3244#issuecomment-1160963273 ## Changes to `canonical_head` and `fork_choice` Previously, the `BeaconChain` had two separate fields: ``` canonical_head: RwLock<Snapshot>, fork_choice: RwLock<BeaconForkChoice> ``` Now, we have grouped these values under a single struct: ``` canonical_head: CanonicalHead { cached_head: RwLock<Arc<Snapshot>>, fork_choice: RwLock<BeaconForkChoice> } ``` Apart from ergonomics, the only *actual* change here is wrapping the canonical head snapshot in an `Arc`. This means that we no longer need to hold the `cached_head` (`canonical_head`, in old terms) lock when we want to pull some values from it. This was done to avoid deadlock risks by preventing functions from acquiring (and holding) the `cached_head` and `fork_choice` locks simultaneously. ## Breaking Changes ### The `state` (root) field in the `finalized_checkpoint` SSE event Consider the scenario where epoch `n` is just finalized, but `start_slot(n)` is skipped. There are two state roots we might in the `finalized_checkpoint` SSE event: 1. The state root of the finalized block, which is `get_block(finalized_checkpoint.root).state_root`. 4. The state root at slot of `start_slot(n)`, which would be the state from (1), but "skipped forward" through any skip slots. Previously, Lighthouse would choose (2). However, we can see that when [Teku generates that event](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/beaconrestapi/src/main/java/tech/pegasys/teku/beaconrestapi/handlers/v1/events/EventSubscriptionManager.java#L171-L182) it uses [`getStateRootFromBlockRoot`](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/provider/src/main/java/tech/pegasys/teku/api/ChainDataProvider.java#L336-L341) which uses (1). I have switched Lighthouse from (2) to (1). I think it's a somewhat arbitrary choice between the two, where (1) is easier to compute and is consistent with Teku. ## Notes for Reviewers I've renamed `BeaconChain::fork_choice` to `BeaconChain::recompute_head`. Doing this helped ensure I broke all previous uses of fork choice and I also find it more descriptive. It describes an action and can't be confused with trying to get a reference to the `ForkChoice` struct. I've changed the ordering of SSE events when a block is received. It used to be `[block, finalized, head]` and now it's `[block, head, finalized]`. It was easier this way and I don't think we were making any promises about SSE event ordering so it's not "breaking". I've made it so fork choice will run when it's first constructed. I did this because I wanted to have a cached version of the last call to `get_head`. Ensuring `get_head` has been run *at least once* means that the cached values doesn't need to wrapped in an `Option`. This was fairly simple, it just involved passing a `slot` to the constructor so it knows *when* it's being run. When loading a fork choice from the store and a slot clock isn't handy I've just used the `slot` that was saved in the `fork_choice_store`. That seems like it would be a faithful representation of the slot when we saved it. I added the `genesis_time: u64` to the `BeaconChain`. It's small, constant and nice to have around. Since we're using FC for the fin/just checkpoints, we no longer get the `0x00..00` roots at genesis. You can see I had to remove a work-around in `ef-tests` here: b56be3bc2. I can't find any reason why this would be an issue, if anything I think it'll be better since the genesis-alias has caught us out a few times (0x00..00 isn't actually a real root). Edit: I did find a case where the `network` expected the 0x00..00 alias and patched it here: 3f26ac3e2. You'll notice a lot of changes in tests. Generally, tests should be functionally equivalent. Here are the things creating the most diff-noise in tests: - Changing tests to be `tokio::async` tests. - Adding `.await` to fork choice, block processing and block production functions. - Refactor of the `canonical_head` "API" provided by the `BeaconChain`. E.g., `chain.canonical_head.cached_head()` instead of `chain.canonical_head.read()`. - Wrapping `SignedBeaconBlock` in an `Arc`. - In the `beacon_chain/tests/block_verification`, we can't use the `lazy_static` `CHAIN_SEGMENT` variable anymore since it's generated with an async function. We just generate it in each test, not so efficient but hopefully insignificant. I had to disable `rayon` concurrent tests in the `fork_choice` tests. This is because the use of `rayon` and `block_on` was causing a panic. Co-authored-by: Mac L <mjladson@pm.me>
2022-07-03 05:36:50 +00:00
let one_after_merge_head = &harness.chain.head_snapshot().beacon_block;
assert_eq!(
*one_after_merge_head
.message()
.body()
.execution_payload()
.unwrap(),
FullPayload::default()
);
assert_eq!(one_after_merge_head.slot(), merge_fork_slot + 1);
/*
* Trigger the terminal PoW block.
*/
harness
.execution_block_generator()
.move_to_terminal_block()
.unwrap();
// Add a slot duration to get to the next slot
let timestamp = harness.get_timestamp_at_slot() + harness.spec.seconds_per_slot;
harness
.execution_block_generator()
.modify_last_block(|block| {
if let Block::PoW(terminal_block) = block {
terminal_block.timestamp = timestamp;
}
});
harness.extend_slots(1).await;
let one_after_merge_head = &harness.chain.head_snapshot().beacon_block;
assert_eq!(
*one_after_merge_head
.message()
.body()
.execution_payload()
.unwrap(),
FullPayload::default()
);
assert_eq!(one_after_merge_head.slot(), merge_fork_slot + 2);
/*
* Next merge block should include an exec payload.
*/
for _ in 0..4 {
Use async code when interacting with EL (#3244) ## Overview This rather extensive PR achieves two primary goals: 1. Uses the finalized/justified checkpoints of fork choice (FC), rather than that of the head state. 2. Refactors fork choice, block production and block processing to `async` functions. Additionally, it achieves: - Concurrent forkchoice updates to the EL and cache pruning after a new head is selected. - Concurrent "block packing" (attestations, etc) and execution payload retrieval during block production. - Concurrent per-block-processing and execution payload verification during block processing. - The `Arc`-ification of `SignedBeaconBlock` during block processing (it's never mutated, so why not?): - I had to do this to deal with sending blocks into spawned tasks. - Previously we were cloning the beacon block at least 2 times during each block processing, these clones are either removed or turned into cheaper `Arc` clones. - We were also `Box`-ing and un-`Box`-ing beacon blocks as they moved throughout the networking crate. This is not a big deal, but it's nice to avoid shifting things between the stack and heap. - Avoids cloning *all the blocks* in *every chain segment* during sync. - It also has the potential to clean up our code where we need to pass an *owned* block around so we can send it back in the case of an error (I didn't do much of this, my PR is already big enough :sweat_smile:) - The `BeaconChain::HeadSafetyStatus` struct was removed. It was an old relic from prior merge specs. For motivation for this change, see https://github.com/sigp/lighthouse/pull/3244#issuecomment-1160963273 ## Changes to `canonical_head` and `fork_choice` Previously, the `BeaconChain` had two separate fields: ``` canonical_head: RwLock<Snapshot>, fork_choice: RwLock<BeaconForkChoice> ``` Now, we have grouped these values under a single struct: ``` canonical_head: CanonicalHead { cached_head: RwLock<Arc<Snapshot>>, fork_choice: RwLock<BeaconForkChoice> } ``` Apart from ergonomics, the only *actual* change here is wrapping the canonical head snapshot in an `Arc`. This means that we no longer need to hold the `cached_head` (`canonical_head`, in old terms) lock when we want to pull some values from it. This was done to avoid deadlock risks by preventing functions from acquiring (and holding) the `cached_head` and `fork_choice` locks simultaneously. ## Breaking Changes ### The `state` (root) field in the `finalized_checkpoint` SSE event Consider the scenario where epoch `n` is just finalized, but `start_slot(n)` is skipped. There are two state roots we might in the `finalized_checkpoint` SSE event: 1. The state root of the finalized block, which is `get_block(finalized_checkpoint.root).state_root`. 4. The state root at slot of `start_slot(n)`, which would be the state from (1), but "skipped forward" through any skip slots. Previously, Lighthouse would choose (2). However, we can see that when [Teku generates that event](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/beaconrestapi/src/main/java/tech/pegasys/teku/beaconrestapi/handlers/v1/events/EventSubscriptionManager.java#L171-L182) it uses [`getStateRootFromBlockRoot`](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/provider/src/main/java/tech/pegasys/teku/api/ChainDataProvider.java#L336-L341) which uses (1). I have switched Lighthouse from (2) to (1). I think it's a somewhat arbitrary choice between the two, where (1) is easier to compute and is consistent with Teku. ## Notes for Reviewers I've renamed `BeaconChain::fork_choice` to `BeaconChain::recompute_head`. Doing this helped ensure I broke all previous uses of fork choice and I also find it more descriptive. It describes an action and can't be confused with trying to get a reference to the `ForkChoice` struct. I've changed the ordering of SSE events when a block is received. It used to be `[block, finalized, head]` and now it's `[block, head, finalized]`. It was easier this way and I don't think we were making any promises about SSE event ordering so it's not "breaking". I've made it so fork choice will run when it's first constructed. I did this because I wanted to have a cached version of the last call to `get_head`. Ensuring `get_head` has been run *at least once* means that the cached values doesn't need to wrapped in an `Option`. This was fairly simple, it just involved passing a `slot` to the constructor so it knows *when* it's being run. When loading a fork choice from the store and a slot clock isn't handy I've just used the `slot` that was saved in the `fork_choice_store`. That seems like it would be a faithful representation of the slot when we saved it. I added the `genesis_time: u64` to the `BeaconChain`. It's small, constant and nice to have around. Since we're using FC for the fin/just checkpoints, we no longer get the `0x00..00` roots at genesis. You can see I had to remove a work-around in `ef-tests` here: b56be3bc2. I can't find any reason why this would be an issue, if anything I think it'll be better since the genesis-alias has caught us out a few times (0x00..00 isn't actually a real root). Edit: I did find a case where the `network` expected the 0x00..00 alias and patched it here: 3f26ac3e2. You'll notice a lot of changes in tests. Generally, tests should be functionally equivalent. Here are the things creating the most diff-noise in tests: - Changing tests to be `tokio::async` tests. - Adding `.await` to fork choice, block processing and block production functions. - Refactor of the `canonical_head` "API" provided by the `BeaconChain`. E.g., `chain.canonical_head.cached_head()` instead of `chain.canonical_head.read()`. - Wrapping `SignedBeaconBlock` in an `Arc`. - In the `beacon_chain/tests/block_verification`, we can't use the `lazy_static` `CHAIN_SEGMENT` variable anymore since it's generated with an async function. We just generate it in each test, not so efficient but hopefully insignificant. I had to disable `rayon` concurrent tests in the `fork_choice` tests. This is because the use of `rayon` and `block_on` was causing a panic. Co-authored-by: Mac L <mjladson@pm.me>
2022-07-03 05:36:50 +00:00
harness.extend_slots(1).await;
Use async code when interacting with EL (#3244) ## Overview This rather extensive PR achieves two primary goals: 1. Uses the finalized/justified checkpoints of fork choice (FC), rather than that of the head state. 2. Refactors fork choice, block production and block processing to `async` functions. Additionally, it achieves: - Concurrent forkchoice updates to the EL and cache pruning after a new head is selected. - Concurrent "block packing" (attestations, etc) and execution payload retrieval during block production. - Concurrent per-block-processing and execution payload verification during block processing. - The `Arc`-ification of `SignedBeaconBlock` during block processing (it's never mutated, so why not?): - I had to do this to deal with sending blocks into spawned tasks. - Previously we were cloning the beacon block at least 2 times during each block processing, these clones are either removed or turned into cheaper `Arc` clones. - We were also `Box`-ing and un-`Box`-ing beacon blocks as they moved throughout the networking crate. This is not a big deal, but it's nice to avoid shifting things between the stack and heap. - Avoids cloning *all the blocks* in *every chain segment* during sync. - It also has the potential to clean up our code where we need to pass an *owned* block around so we can send it back in the case of an error (I didn't do much of this, my PR is already big enough :sweat_smile:) - The `BeaconChain::HeadSafetyStatus` struct was removed. It was an old relic from prior merge specs. For motivation for this change, see https://github.com/sigp/lighthouse/pull/3244#issuecomment-1160963273 ## Changes to `canonical_head` and `fork_choice` Previously, the `BeaconChain` had two separate fields: ``` canonical_head: RwLock<Snapshot>, fork_choice: RwLock<BeaconForkChoice> ``` Now, we have grouped these values under a single struct: ``` canonical_head: CanonicalHead { cached_head: RwLock<Arc<Snapshot>>, fork_choice: RwLock<BeaconForkChoice> } ``` Apart from ergonomics, the only *actual* change here is wrapping the canonical head snapshot in an `Arc`. This means that we no longer need to hold the `cached_head` (`canonical_head`, in old terms) lock when we want to pull some values from it. This was done to avoid deadlock risks by preventing functions from acquiring (and holding) the `cached_head` and `fork_choice` locks simultaneously. ## Breaking Changes ### The `state` (root) field in the `finalized_checkpoint` SSE event Consider the scenario where epoch `n` is just finalized, but `start_slot(n)` is skipped. There are two state roots we might in the `finalized_checkpoint` SSE event: 1. The state root of the finalized block, which is `get_block(finalized_checkpoint.root).state_root`. 4. The state root at slot of `start_slot(n)`, which would be the state from (1), but "skipped forward" through any skip slots. Previously, Lighthouse would choose (2). However, we can see that when [Teku generates that event](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/beaconrestapi/src/main/java/tech/pegasys/teku/beaconrestapi/handlers/v1/events/EventSubscriptionManager.java#L171-L182) it uses [`getStateRootFromBlockRoot`](https://github.com/ConsenSys/teku/blob/de2b2801c89ef5abf983d6bf37867c37fc47121f/data/provider/src/main/java/tech/pegasys/teku/api/ChainDataProvider.java#L336-L341) which uses (1). I have switched Lighthouse from (2) to (1). I think it's a somewhat arbitrary choice between the two, where (1) is easier to compute and is consistent with Teku. ## Notes for Reviewers I've renamed `BeaconChain::fork_choice` to `BeaconChain::recompute_head`. Doing this helped ensure I broke all previous uses of fork choice and I also find it more descriptive. It describes an action and can't be confused with trying to get a reference to the `ForkChoice` struct. I've changed the ordering of SSE events when a block is received. It used to be `[block, finalized, head]` and now it's `[block, head, finalized]`. It was easier this way and I don't think we were making any promises about SSE event ordering so it's not "breaking". I've made it so fork choice will run when it's first constructed. I did this because I wanted to have a cached version of the last call to `get_head`. Ensuring `get_head` has been run *at least once* means that the cached values doesn't need to wrapped in an `Option`. This was fairly simple, it just involved passing a `slot` to the constructor so it knows *when* it's being run. When loading a fork choice from the store and a slot clock isn't handy I've just used the `slot` that was saved in the `fork_choice_store`. That seems like it would be a faithful representation of the slot when we saved it. I added the `genesis_time: u64` to the `BeaconChain`. It's small, constant and nice to have around. Since we're using FC for the fin/just checkpoints, we no longer get the `0x00..00` roots at genesis. You can see I had to remove a work-around in `ef-tests` here: b56be3bc2. I can't find any reason why this would be an issue, if anything I think it'll be better since the genesis-alias has caught us out a few times (0x00..00 isn't actually a real root). Edit: I did find a case where the `network` expected the 0x00..00 alias and patched it here: 3f26ac3e2. You'll notice a lot of changes in tests. Generally, tests should be functionally equivalent. Here are the things creating the most diff-noise in tests: - Changing tests to be `tokio::async` tests. - Adding `.await` to fork choice, block processing and block production functions. - Refactor of the `canonical_head` "API" provided by the `BeaconChain`. E.g., `chain.canonical_head.cached_head()` instead of `chain.canonical_head.read()`. - Wrapping `SignedBeaconBlock` in an `Arc`. - In the `beacon_chain/tests/block_verification`, we can't use the `lazy_static` `CHAIN_SEGMENT` variable anymore since it's generated with an async function. We just generate it in each test, not so efficient but hopefully insignificant. I had to disable `rayon` concurrent tests in the `fork_choice` tests. This is because the use of `rayon` and `block_on` was causing a panic. Co-authored-by: Mac L <mjladson@pm.me>
2022-07-03 05:36:50 +00:00
let block = &harness.chain.head_snapshot().beacon_block;
execution_payloads.push(block.message().body().execution_payload().unwrap().clone());
}
verify_execution_payload_chain(execution_payloads.as_slice());
}