This will stand up a Postgraphile server on the public, eth, and btc schemas- exposing GraphQL endpoints for all of the tables contained under those schemas.
All of their data can then be queried with standard [GraphQL](https://graphql.org) queries.
### RPC Subscription Interface
A direct, real-time subscription to the data being processed by the super node can be established over WS or IPC through the [Stream](../../pkg/super_node/api.go#L53) RPC method.
This method is not chain-specific and each chain-type supports it, it is accessed under the "vdb" namespace rather than a chain-specific namespace. An interface for
subscribing to this endpoint is provided [here](../../libraries/shared/streamer/super_node_streamer.go).
When subscribing to this endpoint, the subscriber provides a set of RLP-encoded subscription parameters. These parameters will be chain-specific, and are used
by the super node to filter and return a requested subset of chain data to the subscriber. (e.g. [BTC](../../pkg/super_node/btc/subscription_config.go), [ETH](../../pkg/super_node/eth/subscription_config.go)).
#### Ethereum RPC Subscription
An example of how to subscribe to a real-time Ethereum data feed from the super node using the `Stream` RPC method is provided below
The .toml file being used to fill the Ethereum subscription config would look something like this:
```toml
[superNode]
[superNode.ethSubscription]
historicalData = false
historicalDataOnly = false
startingBlock = 0
endingBlock = 0
wsPath = "ws://127.0.0.1:8080"
[superNode.ethSubscription.headerFilter]
off = false
uncles = false
[superNode.ethSubscription.txFilter]
off = false
src = []
dst = []
[superNode.ethSubscription.receiptFilter]
off = false
contracts = []
topic0s = []
topic1s = []
topic2s = []
topic3s = []
[superNode.ethSubscription.stateFilter]
off = false
addresses = []
intermediateNodes = false
[superNode.ethSubscription.storageFilter]
off = true
addresses = []
storageKeys = []
intermediateNodes = false
```
These configuration parameters are broken down as follows:
`ethSubscription.wsPath` is used to define the SuperNode ws url OR ipc endpoint we subscribe to
`ethSubscription.historicalData` specifies whether or not the super node should look up historical data in its cache and
send that to the subscriber, if this is set to `false` then the super node only streams newly synced/incoming data
`ethSubscription.historicalDataOnly` will tell the super node to only send historical data with the specified range and
not stream forward syncing data
`ethSubscription.startingBlock` is the starting block number for the range we want to receive data in
`ethSubscription.endingBlock` is the ending block number for the range we want to receive data in;
setting to 0 means there is no end/we will continue streaming indefinitely.
`ethSubscription.headerFilter` has two sub-options: `off` and `uncles`.
- Setting `off` to true tells the super node to not send any headers to the subscriber
- setting `uncles` to true tells the super node to send uncles in addition to normal headers.
`ethSubscription.txFilter` has three sub-options: `off`, `src`, and `dst`.
- Setting `off` to true tells the super node to not send any transactions to the subscriber
-`src` and `dst` are string arrays which can be filled with ETH addresses we want to filter transactions for,
if they have any addresses then the super node will only send transactions that were sent or received by the addresses contained
in `src` and `dst`, respectively.
`ethSubscription.receiptFilter` has four sub-options: `off`, `topics`, `contracts` and `matchTxs`.
- Setting `off` to true tells the super node to not send any receipts to the subscriber
-`topic0s` is a string array which can be filled with event topics we want to filter for,
if it has any topics then the super node will only send receipts that contain logs which have that topic0.
-`contracts` is a string array which can be filled with contract addresses we want to filter for, if it contains any contract addresses the super node will
only send receipts that correspond to one of those contracts.
-`matchTrxs` is a bool which when set to true any receipts that correspond to filtered for transactions will be sent by the super node, regardless of whether or not the receipt satisfies the `topics` or `contracts` filters.
`ethSubscription.stateFilter` has three sub-options: `off`, `addresses`, and `intermediateNodes`.
- Setting `off` to true tells the super node to not send any state data to the subscriber
-`addresses` is a string array which can be filled with ETH addresses we want to filter state for,
if it has any addresses then the super node will only send state leafs (accounts) corresponding to those account addresses.
- By default the super node only sends along state leafs, if we want to receive branch and extension nodes as well `intermediateNodes` can be set to `true`.
`ethSubscription.storageFilter` has four sub-options: `off`, `addresses`, `storageKeys`, and `intermediateNodes`.
- Setting `off` to true tells the super node to not send any storage data to the subscriber
-`addresses` is a string array which can be filled with ETH addresses we want to filter storage for,
if it has any addresses then the super node will only send storage nodes from the storage tries at those state addresses.
-`storageKeys` is another string array that can be filled with storage keys we want to filter storage data for. It is important to note that the storage keys need to be the actual keccak256 hashes, whereas
the addresses in the `addresses` fields are pre-hashed ETH addresses.
- By default the super node only sends along storage leafs, if we want to receive branch and extension nodes as well `intermediateNodes` can be set to `true`.
### Bitcoin RPC Subscription:
An example of how to subscribe to a real-time Bitcoin data feed from the super node using the `Stream` RPC method is provided below
The .toml file being used to fill the Bitcoin subscription config would look something like this:
```toml
[superNode]
[superNode.btcSubscription]
historicalData = false
historicalDataOnly = false
startingBlock = 0
endingBlock = 0
wsPath = "ws://127.0.0.1:8080"
[superNode.btcSubscription.headerFilter]
off = false
[superNode.btcSubscription.txFilter]
off = false
segwit = false
witnessHashes = []
indexes = []
pkScriptClass = []
multiSig = false
addresses = []
```
These configuration parameters are broken down as follows:
`btcSubscription.wsPath` is used to define the SuperNode ws url OR ipc endpoint we subscribe to
`btcSubscription.historicalData` specifies whether or not the super node should look up historical data in its cache and
send that to the subscriber, if this is set to `false` then the super node only streams newly synced/incoming data
`btcSubscription.historicalDataOnly` will tell the super node to only send historical data with the specified range and
not stream forward syncing data
`btcSubscription.startingBlock` is the starting block number for the range we want to receive data in
`btcSubscription.endingBlock` is the ending block number for the range we want to receive data in;
setting to 0 means there is no end/we will continue streaming indefinitely.
`btcSubscription.headerFilter` has one sub-option: `off`.
- Setting `off` to true tells the super node to
not send any headers to the subscriber.
- Additional header-filtering options will be added in the future.
`btcSubscription.txFilter` has seven sub-options: `off`, `segwit`, `witnessHashes`, `indexes`, `pkScriptClass`, `multiSig`, and `addresses`.
- Setting `off` to true tells the super node to not send any transactions to the subscriber.
- Setting `segwit` to true tells the super node to only send segwit transactions.
-`witnessHashes` is a string array that can be filled with witness hash string; if it contains any hashes the super node will only send transactions that contain one of those hashes.
-`indexes` is an int64 array that can be filled with tx index numbers; if it contains any integers the super node will only send transactions at those indexes (e.g. `[0]` will send only coinbase transactions)
-`pkScriptClass` is an uint8 array that can be filled with pk script class numbers; if it contains any integers the super node will only send transactions that have at least one tx output with one of the specified pkscript classes;
possible class types are 0 through 8 as defined [here](https://github.com/btcsuite/btcd/blob/master/txscript/standard.go#L52).
- Setting `multisig` to true tells the super node to send only multi-sig transactions- to send only transaction that have at least one tx output that requires more than one signature to spend.
-`addresses` is a string array that can be filled with btc address strings; if it contains any addresses the super node will only send transactions that have at least one tx output with at least one of the provided addresses.
### Native API Recapitulation:
In addition to providing novel Postgraphile and RPC-Subscription endpoints, we are working towards complete recapitulation of the
standard chain APIs. This will allow direct compatibility with software that already makes use of the standard interfaces.
#### Ethereum JSON-RPC API
The super node currently faithfully recapitulates portions of the Ethereum JSON-RPC api standard.
Additional endpoints will be added in the near future, with the immediate goal of recapitulating the largest set of "eth_" endpoints which can be provided as a service.
