fixturenet-optimism-stack/stack/fixturenet-optimism/README.md

# fixturenet-optimism

Instructions to setup and deploy an end-to-end L1+L2 stack with [fixturenet-eth](https://git.vdb.to/cerc-io/fixturenet-eth-stacks/src/branch/main/stack-orchestrator/stacks/fixturenet-eth) (L1) and [Optimism](https://stack.optimism.io) (L2)

We support running just the L2 part of stack, given an external L1 endpoint. Follow the [L2 only doc](./l2-only.md) for the same.

## Setup

Clone the stack repo:

```bash
laconic-so fetch-stack git.vdb.to/cerc-io/fixturenet-eth-stacks
laconic-so fetch-stack git.vdb.to/cerc-io/fixturenet-optimism-stack
```

Clone required repositories:

```bash
# L1 (fixturenet-eth)
laconic-so --stack ~/cerc/fixturenet-eth-stacks/stack-orchestrator/stacks/fixturenet-eth setup-repositories

# L2 (optimism)
laconic-so --stack ~/cerc/fixturenet-optimism-stack/stack/fixturenet-optimism setup-repositories

# If this throws an error as a result of being already checked out to a branch/tag in a repo, remove concerned repositories and re-run the command
# The repositories are located in $HOME/cerc by default
```

Build the container images:

```bash
# L1 (fixturenet-eth)
laconic-so --stack ~/cerc/fixturenet-eth-stacks/stack-orchestrator/stacks/fixturenet-eth build-containers

# L2 (optimism)
laconic-so --stack ~/cerc/fixturenet-optimism-stack/stack/fixturenet-optimism build-containers

# If redeploying with changes in the stack containers
laconic-so --stack ~/cerc/fixturenet-eth-stacks/stack-orchestrator/stacks/fixturenet-eth build-containers --force-rebuild
laconic-so --stack ~/cerc/fixturenet-optimism-stack/stack/fixturenet-optimism build-containers --force-rebuild

# If errors are thrown during build, old images used by this stack would have to be deleted
```

Note: this will take >10 mins depending on the specs of your machine, and **requires** 16GB of memory or greater.

This should create the required docker images in the local image registry:
* cerc/lighthouse
* cerc/lighthouse-cli
* cerc/fixturenet-eth-genesis-premerge
* cerc/fixturenet-eth-geth
* cerc/fixturenet-eth-lighthouse
* cerc/optimism-contracts
* cerc/optimism-op-node
* cerc/optimism-l2geth
* cerc/optimism-op-batcher
* cerc/optimism-op-proposer

## Create a deployment

First, create a spec file for the deployment, which will map the stack's ports and volumes to the host:

```bash
laconic-so --stack ~/cerc/fixturenet-eth-stacks/stack-orchestrator/stacks/fixturenet-eth deploy init --output fixturenet-eth.yml

laconic-so --stack ~/cerc/fixturenet-optimism-stack/stack/fixturenet-optimism deploy init --map-ports-to-host any-fixed-random --output fixturenet-optimism-spec.yml
```

### Ports

It is usually necessary to expose certain container ports on one or more of the host's addresses to allow incoming connections.
Any ports defined in the Docker compose file are exposed by default with random port assignments, bound to "any" interface (IP address 0.0.0.0), but the port mappings can be customized by editing the "spec" file generated by `laconic-so deploy init`.

In addition, a stack-wide port mapping "recipe" can be applied at the time the
`laconic-so deploy init` command is run, by supplying the  desired recipe with the `--map-ports-to-host` option. The following recipes are supported:
| Recipe | Host Port Mapping |
|--------|-------------------|
| any-variable-random | Bind to 0.0.0.0 using a random port assigned at start time (default) |
| localhost-same | Bind to 127.0.0.1 using the same port number as exposed by the containers |
| any-same | Bind to 0.0.0.0 using the same port number as exposed by the containers |
| localhost-fixed-random | Bind to 127.0.0.1 using a random port number selected at the time the command is run (not checked for already in use)|
| any-fixed-random | Bind to 0.0.0.0 using a random port number selected at the time the command is run (not checked for already in use) |

For example, you may wish to use `any-fixed-random` to generate the initial mappings and then edit the spec file to set the `fixturenet-eth-geth-1` RPC to port 8545 and the `op-geth` RPC to port 9545 on the host.

Or, you may wish to use `any-same` for the initial mappings -- in which case you'll have to edit the spec to file to ensure the various geth instances aren't all trying to publish to host ports 8545/8546 at once.

### Data volumes

Container data volumes are bind-mounted to specified paths in the host filesystem.
The default setup (generated by `laconic-so deploy init`) places the volumes in the `./data` subdirectory of the deployment directory. The default mappings can be customized by editing the "spec" file generated by `laconic-so deploy init`.

---

Once you've made any needed changes to the spec file, create a deployment from it:

```bash
laconic-so --stack ~/cerc/fixturenet-eth-stacks/stack-orchestrator/stacks/fixturenet-eth deploy create --spec-file fixturenet-eth.yml --deployment-dir fixturenet-eth-deployment

laconic-so --stack ~/cerc/fixturenet-optimism-stack/stack/fixturenet-optimism deploy create --spec-file fixturenet-optimism-spec.yml --deployment-dir fixturenet-optimism-deployment

# Place them both in the same namespace (cluster)
cp fixturenet-eth-deployment/deployment.yml fixturenet-optimism-deployment/deployment.yml
```

### Env configuration

Inside the `fixturenet-eth-deployment` deployment directory, open `config.env` file and set following env variables:

```bash
# Allow unprotected txs for Optimism contracts deployment
CERC_ALLOW_UNPROTECTED_TXS=true
```

## Start the stack

Start the deployment:

```bash
laconic-so deployment --dir fixturenet-eth-deployment start
laconic-so deployment --dir fixturenet-optimism-deployment start
```

1. The `fixturenet-eth` L1 chain will start up first and begin producing blocks
2. The `fixturenet-optimism-contracts` service will configure and deploy the Optimism contracts to L1, exiting when complete. This may take several minutes; you can follow the progress by following the container's logs (see below)
3. The `op-node` and `op-geth` services will initialize themselves (if not already initialized) and start
4. The remaining services, `op-batcher` and `op-proposer` will start

### Logs

To list and monitor the running containers:

```bash
laconic-so --stack ~/cerc/fixturenet-eth-stacks/stack-orchestrator/stacks/fixturenet-eth deploy ps
laconic-so --stack ~/cerc/fixturenet-optimism-stack/stack/fixturenet-optimism deploy ps

# With status
docker ps

# Check logs for a container
docker logs -f <CONTAINER_ID>
```

## Example: bridge some ETH from L1 to L2

Send some ETH from the desired account to the `L1StandardBridgeProxy` contract on L1 to test bridging to L2.

We can use the testing account `0xe6CE22afe802CAf5fF7d3845cec8c736ecc8d61F` which is pre-funded and unlocked, and the `cerc/optimism-contracts:local` container to make use of the `cast` cli.

1. Note the docker network the stack is running on:

  ```bash
  docker network ls
  # The network name will be something like laconic-[some_hash]_default
  ```

2. Set some variables:

  ```bash
  L1_RPC=http://fixturenet-eth-geth-1:8545
  L2_RPC=http://op-geth:8545
  NETWORK=<the network name found above>
  DEPLOYMENT_CONTEXT=<L1 chain-id; 1212 by default>
  ACCOUNT=0xe6CE22afe802CAf5fF7d3845cec8c736ecc8d61F
  ```

  You can create an alias for running `cast` on the network:

  ```bash
  alias op-cast="docker run --rm --network $NETWORK --entrypoint cast cerc/optimism-contracts:local"
  ```

  If you need to check the L1 chain-id, you can use:

  ```bash
  op-cast chain-id --rpc-url $L1_RPC
  ```

3. Check the account starting balance on L2 (it should be 0):

  ```bash
  op-cast balance $ACCOUNT --rpc-url $L2_RPC
  # 0
  ```

4. Read the bridge contract address from the L1 deployment records in the `op-node` container:

  ```bash
  # get the container id for op-node
  NODE_CONTAINER=$(docker ps --filter "name=op-node" -q)
  # get the bridge contract address
  BRIDGE=$(docker exec $NODE_CONTAINER cat /l1-deployment/$DEPLOYMENT_CONTEXT-deploy.json | jq -r .L1StandardBridgeProxy)
  # get the funded account's pk
  ACCOUNT_PK=$(docker exec $NODE_CONTAINER jq -r '.AdminKey' /l2-accounts/accounts.json)
  ```

5. Use cast to send some ETH to the bridge contract:

  ```bash
  op-cast send --from $ACCOUNT --value 1ether $BRIDGE --rpc-url $L1_RPC --private-key $ACCOUNT_PK
  ```

6. Allow a couple minutes for the bridge to complete.

7. Check the L2 balance again (it should show the bridged funds):

  ```bash
  op-cast balance $ACCOUNT --rpc-url $L2_RPC
  # 1000000000000000000
  ```

## Clean up

To stop all services running in the background, while preserving chain data:

```bash
laconic-so deployment --dir fixturenet-optimism-deployment stop
laconic-so deployment --dir fixturenet-eth-deployment stop
```

To stop all services and also delete chain data:

```bash
laconic-so deployment --dir fixturenet-optimism-deployment stop --delete-volumes
laconic-so deployment --dir fixturenet-eth-deployment stop --delete-volumes
```

## Troubleshooting

* If `op-geth` service aborts or is restarted, the following error might occur in the `op-node` service:

  ```bash
  WARN [02-16|21:22:02.868] Derivation process temporary error       attempts=14 err="stage 0 failed resetting: temp: failed to find the L2 Heads to start from: failed to fetch L2 block by hash 0x0000000000000000000000000000000000000000000000000000000000000000: failed to determine block-hash of hash 0x0000000000000000000000000000000000000000000000000000000000000000, could not get payload: not found"
  ```

* This means that the data directory that `op-geth` is using is corrupted and needs to be reinitialized; the containers `op-geth`, `op-node` and `op-batcher` need to be started afresh:

  WARNING: This will reset the L2 chain; consequently, all the data on it will be lost

  * Stop and remove the concerned containers:

    ```bash
    # List the containers
    docker ps -f "name=op-geth|op-node|op-batcher"

    # Force stop and remove the listed containers
    docker rm -f $(docker ps -qf "name=op-geth|op-node|op-batcher")
    ```

  * Remove the concerned volume:

    ```bash
    # List the volume
    docker volume ls -q --filter name=l2_geth_data

    # Remove the listed volume
    docker volume rm $(docker volume ls -q --filter name=l2_geth_data)
    ```

  * Re-run the deployment command used in [Deploy](#deploy) to restart the stopped containers