[debug] just build plugeth images

tests/fixturenet-plugeth-stack/run-test.sh

@@ -48,85 +48,89 @@ mkdir -p $CERC_REPO_BASE_DIR
 $SO_COMMAND --stack ${stack_name} setup-repositories
 
 echo "Building containers"
-$SO_COMMAND --stack ${stack_name} build-containers
+$SO_COMMAND --stack ${stack_name} build-containers \
+  --include cerc/plugeth-statediff,cerc/plugeth
 
-test_deployment_dir=$CERC_REPO_BASE_DIR/test-deployment-dir
-test_deployment_spec=$CERC_REPO_BASE_DIR/test-deployment-spec.yml
+echo "Exiting for debugging"
+exit 1
 
-$SO_COMMAND --stack ${stack_name} deploy init --output $test_deployment_spec
-# Check the file now exists
-if [ ! -f "$test_deployment_spec" ]; then
-    test_fail_exit "deploy init test: spec file not present"
-fi
-echo "deploy init test: passed"
+# test_deployment_dir=$CERC_REPO_BASE_DIR/test-deployment-dir
+# test_deployment_spec=$CERC_REPO_BASE_DIR/test-deployment-spec.yml
 
-$SO_COMMAND --stack ${stack_name} deploy create --spec-file $test_deployment_spec --deployment-dir $test_deployment_dir
-# Check the deployment dir exists
-if [ ! -d "$test_deployment_dir" ]; then
-    test_fail_exit "deploy create test: deployment directory not present"
-fi
-echo "deploy create test: passed"
+# $SO_COMMAND --stack ${stack_name} deploy init --output $test_deployment_spec
+# # Check the file now exists
+# if [ ! -f "$test_deployment_spec" ]; then
+#     test_fail_exit "deploy init test: spec file not present"
+# fi
+# echo "deploy init test: passed"
 
-dump_logs () {
-  echo "Test failed. Logs from stack:"
-  $SO_COMMAND deployment --dir $test_deployment_dir logs
-}
-trap dump_logs ERR
+# $SO_COMMAND --stack ${stack_name} deploy create --spec-file $test_deployment_spec --deployment-dir $test_deployment_dir
+# # Check the deployment dir exists
+# if [ ! -d "$test_deployment_dir" ]; then
+#     test_fail_exit "deploy create test: deployment directory not present"
+# fi
+# echo "deploy create test: passed"
 
-$SO_COMMAND deployment --dir $test_deployment_dir start
+# dump_logs () {
+#   echo "Test failed. Logs from stack:"
+#   $SO_COMMAND deployment --dir $test_deployment_dir logs
+# }
+# trap dump_logs ERR
 
-geth_endpoint=localhost:$($SO_COMMAND deployment --dir $test_deployment_dir port fixturenet-eth-geth-1 8545 | cut -d: -f2)
+# $SO_COMMAND deployment --dir $test_deployment_dir start
 
-timeout=900 # 15 minutes
-log_info "Getting initial block number. Timeout set to $timeout seconds"
-start_time=$(date +%s)
-elapsed_time=0
-initial_block_number=0
-while [ "$initial_block_number" -eq 0 ]  && [ $elapsed_time -lt $timeout ]; do
-  sleep 10
-  log_info "Waiting for initial block..."
-  initial_block_number=$(get_block_number $geth_endpoint)
-  current_time=$(date +%s)
-  elapsed_time=$((current_time - start_time))
-done
+# geth_endpoint=localhost:$($SO_COMMAND deployment --dir $test_deployment_dir port fixturenet-eth-geth-1 8545 | cut -d: -f2)
 
-subsequent_block_number=$initial_block_number
+# timeout=900 # 15 minutes
+# log_info "Getting initial block number. Timeout set to $timeout seconds"
+# start_time=$(date +%s)
+# elapsed_time=0
+# initial_block_number=0
+# while [ "$initial_block_number" -eq 0 ]  && [ $elapsed_time -lt $timeout ]; do
+#   sleep 10
+#   log_info "Waiting for initial block..."
+#   initial_block_number=$(get_block_number $geth_endpoint)
+#   current_time=$(date +%s)
+#   elapsed_time=$((current_time - start_time))
+# done
 
-# if initial block was 0 after timeout, assume chain did not start successfully and skip finding subsequent block
-if [[ $initial_block_number -gt 0 ]]; then
-  timeout=300
-  log_info "Getting subsequent block number. Timeout set to $timeout seconds"
-  start_time=$(date +%s)
-  elapsed_time=0
-  # wait for 5 blocks or timeout
-  while [ "$subsequent_block_number" -le $((initial_block_number + 5)) ]  && [ $elapsed_time -lt $timeout ]; do
-    sleep 10
-    log_info "Waiting for five blocks or $timeout seconds..."
-    subsequent_block_number=$(get_block_number $geth_endpoint)
-    current_time=$(date +%s)
-    elapsed_time=$((current_time - start_time))
-  done
-fi
+# subsequent_block_number=$initial_block_number
 
-# will return 0 if either of the above loops timed out
-block_number_difference=$((subsequent_block_number - initial_block_number))
+# # if initial block was 0 after timeout, assume chain did not start successfully and skip finding subsequent block
+# if [[ $initial_block_number -gt 0 ]]; then
+#   timeout=300
+#   log_info "Getting subsequent block number. Timeout set to $timeout seconds"
+#   start_time=$(date +%s)
+#   elapsed_time=0
+#   # wait for 5 blocks or timeout
+#   while [ "$subsequent_block_number" -le $((initial_block_number + 5)) ]  && [ $elapsed_time -lt $timeout ]; do
+#     sleep 10
+#     log_info "Waiting for five blocks or $timeout seconds..."
+#     subsequent_block_number=$(get_block_number $geth_endpoint)
+#     current_time=$(date +%s)
+#     elapsed_time=$((current_time - start_time))
+#   done
+# fi
 
-log_info "Results of block height queries:"
-echo "Initial block height: $initial_block_number"
-echo "Subsequent block height: $subsequent_block_number"
+# # will return 0 if either of the above loops timed out
+# block_number_difference=$((subsequent_block_number - initial_block_number))
 
-# Block height difference should be between 1 and some small number
-[[ $block_number_difference -gt 1 && $block_number_difference -lt 100 ]]
+# log_info "Results of block height queries:"
+# echo "Initial block height: $initial_block_number"
+# echo "Subsequent block height: $subsequent_block_number"
 
-# Check that the block hash is present in the ipld-eth-db
-echo "Querying ipld-eth-db for block number $subsequent_block_number"
-block_hash_query="SELECT block_hash from eth.header_cids where block_number = $subsequent_block_number"
-block_hash=$(
-  $SO_COMMAND deployment --dir $test_deployment_dir exec ipld-eth-db \
-    "psql -qtA -U vdbm -c '$block_hash_query' cerc_testing"
-)
-echo "Block hash in ipld-eth-db: $block_hash"
+# # Block height difference should be between 1 and some small number
+# [[ $block_number_difference -gt 1 && $block_number_difference -lt 100 ]]
 
-[[ -n $block_hash ]]
+# # Check that the block hash is present in the ipld-eth-db
+# echo "Querying ipld-eth-db for block number $subsequent_block_number"
+# block_hash_query="SELECT block_hash from eth.header_cids where block_number = $subsequent_block_number"
+# block_hash=$(
+#   $SO_COMMAND deployment --dir $test_deployment_dir exec ipld-eth-db \
+#     "psql -qtA -U vdbm -c '$block_hash_query' cerc_testing"
+# )
+# echo "Block hash in ipld-eth-db: $block_hash"
 
-echo "Test passed."
+# [[ -n $block_hash ]]
+
+# echo "Test passed."