From 220afc7cf48deb141945e6543485a4e3338fd22a Mon Sep 17 00:00:00 2001 From: Greg Szabo Date: Wed, 23 May 2018 12:38:01 -0400 Subject: [PATCH] Remotenet start/status/stop added to Makefile to create a DO validator network --- Makefile | 26 +- networks/remote/README.rst | 53 ++ networks/remote/ansible/.gitignore | 2 + networks/remote/ansible/ansible.cfg | 4 + networks/remote/ansible/clear-config.yml | 9 + networks/remote/ansible/inventory/COPYING | 675 ++++++++++++++++++ .../ansible/inventory/digital_ocean.ini | 34 + .../remote/ansible/inventory/digital_ocean.py | 471 ++++++++++++ .../ansible/roles/clear-config/tasks/main.yml | 12 + .../roles/setup-validators/defaults/main.yml | 4 + .../roles/setup-validators/tasks/main.yml | 50 ++ .../remote/ansible/roles/start/tasks/main.yml | 5 + .../remote/ansible/roles/stop/tasks/main.yml | 5 + networks/remote/ansible/setup-validators.yml | 9 + networks/remote/ansible/start.yml | 11 + networks/remote/ansible/status.yml | 17 + networks/remote/ansible/stop.yml | 11 + networks/remote/terraform/.gitignore | 4 + networks/remote/terraform/README.rst | 53 ++ networks/remote/terraform/cluster/main.tf | 46 ++ networks/remote/terraform/cluster/outputs.tf | 15 + .../remote/terraform/cluster/variables.tf | 30 + networks/remote/terraform/files/gaiad.service | 17 + networks/remote/terraform/files/terraform.sh | 19 + networks/remote/terraform/main.tf | 43 ++ 25 files changed, 1624 insertions(+), 1 deletion(-) create mode 100644 networks/remote/README.rst create mode 100644 networks/remote/ansible/.gitignore create mode 100644 networks/remote/ansible/ansible.cfg create mode 100644 networks/remote/ansible/clear-config.yml create mode 100644 networks/remote/ansible/inventory/COPYING create mode 100644 networks/remote/ansible/inventory/digital_ocean.ini create mode 100755 networks/remote/ansible/inventory/digital_ocean.py create mode 100644 networks/remote/ansible/roles/clear-config/tasks/main.yml create mode 100644 networks/remote/ansible/roles/setup-validators/defaults/main.yml create mode 100644 networks/remote/ansible/roles/setup-validators/tasks/main.yml create mode 100644 networks/remote/ansible/roles/start/tasks/main.yml create mode 100644 networks/remote/ansible/roles/stop/tasks/main.yml create mode 100644 networks/remote/ansible/setup-validators.yml create mode 100644 networks/remote/ansible/start.yml create mode 100644 networks/remote/ansible/status.yml create mode 100644 networks/remote/ansible/stop.yml create mode 100644 networks/remote/terraform/.gitignore create mode 100644 networks/remote/terraform/README.rst create mode 100644 networks/remote/terraform/cluster/main.tf create mode 100644 networks/remote/terraform/cluster/outputs.tf create mode 100644 networks/remote/terraform/cluster/variables.tf create mode 100644 networks/remote/terraform/files/gaiad.service create mode 100644 networks/remote/terraform/files/terraform.sh create mode 100644 networks/remote/terraform/main.tf diff --git a/Makefile b/Makefile index 043645c670..7a347294c3 100644 --- a/Makefile +++ b/Makefile @@ -126,7 +126,31 @@ devdoc_update: docker pull tendermint/devdoc +######################################## +### Remote validator nodes using terraform and ansible + +# Build linux binary +build-linux: + GOOS=linux GOARCH=amd64 $(MAKE) build + +TESTNET_NAME?=remotenet +SERVERS?=4 +BINARY=$(CURDIR)/build/gaiad +remotenet-start: + @if [ -z "$(DO_API_TOKEN)" ]; then echo "DO_API_TOKEN environment variable not set." ; false ; fi + @if ! [ -f $(HOME)/.ssh/id_rsa.pub ]; then ssh-keygen ; fi + cd networks/remote/terraform && terraform init && terraform apply -var DO_API_TOKEN="$(DO_API_TOKEN)" -var SSH_PUBLIC_FILE="$(HOME)/.ssh/id_rsa.pub" -var SSH_PRIVATE_FILE="$(HOME)/.ssh/id_rsa" -var TESTNET_NAME="$(TESTNET_NAME)" -var SERVERS="$(SERVERS)" + cd networks/remote/ansible && ANSIBLE_HOST_KEY_CHECKING=False ansible-playbook -i inventory/digital_ocean.py -l "$(TESTNET_NAME)" -e BINARY=$(BINARY) -e TESTNET_NAME="$(TESTNET_NAME)" setup-validators.yml + cd networks/remote/ansible && ansible-playbook -i inventory/digital_ocean.py -l "$(TESTNET_NAME)" start.yml + +remotenet-stop: + @if [ -z "$(DO_API_TOKEN)" ]; then echo "DO_API_TOKEN environment variable not set." ; false ; fi + cd networks/remote/terraform && terraform destroy -var DO_API_TOKEN="$(DO_API_TOKEN)" -var SSH_PUBLIC_FILE="$(HOME)/.ssh/id_rsa.pub" -var SSH_PRIVATE_FILE="$(HOME)/.ssh/id_rsa" + +remotenet-status: + cd networks/remote/ansible && ansible-playbook -i inventory/digital_ocean.py -l "$(TESTNET_NAME)" status.yml + # To avoid unintended conflicts with file names, always add to .PHONY # unless there is a reason not to. # https://www.gnu.org/software/make/manual/html_node/Phony-Targets.html -.PHONY: build build_examples install install_examples dist check_tools get_tools get_vendor_deps draw_deps test test_cli test_unit test_cover test_lint benchmark devdoc_init devdoc devdoc_save devdoc_update +.PHONY: build build_examples install install_examples dist check_tools get_tools get_vendor_deps draw_deps test test_cli test_unit test_cover test_lint benchmark devdoc_init devdoc devdoc_save devdoc_update remotenet-start remotenet-stop remotenet-status diff --git a/networks/remote/README.rst b/networks/remote/README.rst new file mode 100644 index 0000000000..04799d9e0e --- /dev/null +++ b/networks/remote/README.rst @@ -0,0 +1,53 @@ +Terraform & Ansible +=================== + +Automated deployments are done using `Terraform `__ to create servers on Digital Ocean then +`Ansible `__ to create and manage testnets on those servers. + +Prerequisites +------------- + +- Install `Terraform `__ and `Ansible `__ on a Linux machine. +- Create a `DigitalOcean API token `__ with read and write capability. +- Install the python dopy package (``pip install dopy``) (This is necessary for the digitalocean.py script for ansible.) +- Create SSH keys + +:: + + export DO_API_TOKEN="abcdef01234567890abcdef01234567890" + export TESTNET_NAME="remotenet" + export SSH_PRIVATE_FILE="$HOME/.ssh/id_rsa" + export SSH_PUBLIC_FILE="$HOME/.ssh/id_rsa.pub" + +These will be used by both ``terraform`` and ``ansible``. + +Create a remote network +----------------------- + +:: + + make remotenet-start + + +Optionally, you can set the number of servers you want to launch and the name of the testnet (which defaults to remotenet): + +:: + + TESTNET_NAME="mytestnet" SERVERS=7 make remotenet-start + + +Quickly see the /status endpoint +-------------------------------- + +:: + + make remotenet-status + + +Delete servers +-------------- + +:: + + make remotenet-stop + diff --git a/networks/remote/ansible/.gitignore b/networks/remote/ansible/.gitignore new file mode 100644 index 0000000000..8826f63a7b --- /dev/null +++ b/networks/remote/ansible/.gitignore @@ -0,0 +1,2 @@ +*.retry +files/* diff --git a/networks/remote/ansible/ansible.cfg b/networks/remote/ansible/ansible.cfg new file mode 100644 index 0000000000..045c1ea606 --- /dev/null +++ b/networks/remote/ansible/ansible.cfg @@ -0,0 +1,4 @@ +[defaults] +retry_files_enabled = False +host_key_checking = False + diff --git a/networks/remote/ansible/clear-config.yml b/networks/remote/ansible/clear-config.yml new file mode 100644 index 0000000000..675cdd0729 --- /dev/null +++ b/networks/remote/ansible/clear-config.yml @@ -0,0 +1,9 @@ +--- + +- hosts: all + user: root + any_errors_fatal: true + gather_facts: no + roles: + - clear-config + diff --git a/networks/remote/ansible/inventory/COPYING b/networks/remote/ansible/inventory/COPYING new file mode 100644 index 0000000000..10926e87f1 --- /dev/null +++ b/networks/remote/ansible/inventory/COPYING @@ -0,0 +1,675 @@ + GNU GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The GNU General Public License is a free, copyleft license for +software and other kinds of works. + + The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +the GNU General Public License is intended to guarantee your freedom to +share and change all versions of a program--to make sure it remains free +software for all its users. We, the Free Software Foundation, use the +GNU General Public License for most of our software; it applies also to +any other work released this way by its authors. You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + + To protect your rights, we need to prevent others from denying you +these rights or asking you to surrender the rights. Therefore, you have +certain responsibilities if you distribute copies of the software, or if +you modify it: responsibilities to respect the freedom of others. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must pass on to the recipients the same +freedoms that you received. You must make sure that they, too, receive +or can get the source code. And you must show them these terms so they +know their rights. + + Developers that use the GNU GPL protect your rights with two steps: +(1) assert copyright on the software, and (2) offer you this License +giving you legal permission to copy, distribute and/or modify it. + + For the developers' and authors' protection, the GPL clearly explains +that there is no warranty for this free software. For both users' and +authors' sake, the GPL requires that modified versions be marked as +changed, so that their problems will not be attributed erroneously to +authors of previous versions. + + Some devices are designed to deny users access to install or run +modified versions of the software inside them, although the manufacturer +can do so. This is fundamentally incompatible with the aim of +protecting users' freedom to change the software. The systematic +pattern of such abuse occurs in the area of products for individuals to +use, which is precisely where it is most unacceptable. Therefore, we +have designed this version of the GPL to prohibit the practice for those +products. If such problems arise substantially in other domains, we +stand ready to extend this provision to those domains in future versions +of the GPL, as needed to protect the freedom of users. + + Finally, every program is threatened constantly by software patents. +States should not allow patents to restrict development and use of +software on general-purpose computers, but in those that do, we wish to +avoid the special danger that patents applied to a free program could +make it effectively proprietary. To prevent this, the GPL assures that +patents cannot be used to render the program non-free. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU General Public License. + + "Copyright" also means copyright-like laws that apply to other kinds of +works, such as semiconductor masks. + + "The Program" refers to any copyrightable work licensed under this +License. Each licensee is addressed as "you". "Licensees" and +"recipients" may be individuals or organizations. + + To "modify" a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of an +exact copy. The resulting work is called a "modified version" of the +earlier work or a work "based on" the earlier work. + + A "covered work" means either the unmodified Program or a work based +on the Program. + + To "propagate" a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + + To "convey" a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user through +a computer network, with no transfer of a copy, is not conveying. + + An interactive user interface displays "Appropriate Legal Notices" +to the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + + 1. Source Code. + + The "source code" for a work means the preferred form of the work +for making modifications to it. "Object code" means any non-source +form of a work. + + A "Standard Interface" means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + + The "System Libraries" of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +"Major Component", in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + + The "Corresponding Source" for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + + The Corresponding Source need not include anything that users +can regenerate automatically from other parts of the Corresponding +Source. + + The Corresponding Source for a work in source code form is that +same work. + + 2. Basic Permissions. + + All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + + You may make, run and propagate covered works that you do not +convey, without conditions so long as your license otherwise remains +in force. You may convey covered works to others for the sole purpose +of having them make modifications exclusively for you, or provide you +with facilities for running those works, provided that you comply with +the terms of this License in conveying all material for which you do +not control copyright. Those thus making or running the covered works +for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of +your copyrighted material outside their relationship with you. + + Conveying under any other circumstances is permitted solely under +the conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + + No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + + When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such circumvention +is effected by exercising rights under this License with respect to +the covered work, and you disclaim any intention to limit operation or +modification of the work as a means of enforcing, against the work's +users, your or third parties' legal rights to forbid circumvention of +technological measures. + + 4. Conveying Verbatim Copies. + + You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + + You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + + You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + + A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +"aggregate" if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + + 6. Conveying Non-Source Forms. + + You may convey a covered work in object code form under the terms +of sections 4 and 5, provided that you also convey the +machine-readable Corresponding Source under the terms of this License, +in one of these ways: + + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + + A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + + A "User Product" is either (1) a "consumer product", which means any +tangible personal property which is normally used for personal, family, +or household purposes, or (2) anything designed or sold for incorporation +into a dwelling. In determining whether a product is a consumer product, +doubtful cases shall be resolved in favor of coverage. For a particular +product received by a particular user, "normally used" refers to a +typical or common use of that class of product, regardless of the status +of the particular user or of the way in which the particular user +actually uses, or expects or is expected to use, the product. A product +is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent +the only significant mode of use of the product. + + "Installation Information" for a User Product means any methods, +procedures, authorization keys, or other information required to install +and execute modified versions of a covered work in that User Product from +a modified version of its Corresponding Source. The information must +suffice to ensure that the continued functioning of the modified object +code is in no case prevented or interfered with solely because +modification has been made. + + If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + + The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or updates +for a work that has been modified or installed by the recipient, or for +the User Product in which it has been modified or installed. Access to a +network may be denied when the modification itself materially and +adversely affects the operation of the network or violates the rules and +protocols for communication across the network. + + Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + + 7. Additional Terms. + + "Additional permissions" are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + + When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + + Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders of +that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + + All other non-permissive additional terms are considered "further +restrictions" within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + + If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + + Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; +the above requirements apply either way. + + 8. Termination. + + You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + + However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the copyright +holder fails to notify you of the violation by some reasonable means +prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + + Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + + 9. Acceptance Not Required for Having Copies. + + You are not required to accept this License in order to receive or +run a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + + Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + + An "entity transaction" is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + + You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + + 11. Patents. + + A "contributor" is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's "contributor version". + + A contributor's "essential patent claims" are all patent claims +owned or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, "control" includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + + Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + + In the following three paragraphs, a "patent license" is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To "grant" such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + + If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. "Knowingly relying" means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + + If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + + A patent license is "discriminatory" if it does not include within +the scope of its coverage, prohibits the exercise of, or is +conditioned on the non-exercise of one or more of the rights that are +specifically granted under this License. You may not convey a covered +work if you are a party to an arrangement with a third party that is +in the business of distributing software, under which you make payment +to the third party based on the extent of your activity of conveying +the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory +patent license (a) in connection with copies of the covered work +conveyed by you (or copies made from those copies), or (b) primarily +for and in connection with specific products or compilations that +contain the covered work, unless you entered into that arrangement, +or that patent license was granted, prior to 28 March 2007. + + Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + + If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey a +covered work so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you may +not convey it at all. For example, if you agree to terms that obligate you +to collect a royalty for further conveying from those to whom you convey +the Program, the only way you could satisfy both those terms and this +License would be to refrain entirely from conveying the Program. + + 13. Use with the GNU Affero General Public License. + + Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU Affero General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the special requirements of the GNU Affero General Public License, +section 13, concerning interaction through a network will apply to the +combination as such. + + 14. Revised Versions of this License. + + The Free Software Foundation may publish revised and/or new versions of +the GNU General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + + Each version is given a distinguishing version number. If the +Program specifies that a certain numbered version of the GNU General +Public License "or any later version" applies to it, you have the +option of following the terms and conditions either of that numbered +version or of any later version published by the Free Software +Foundation. If the Program does not specify a version number of the +GNU General Public License, you may choose any version ever published +by the Free Software Foundation. + + If the Program specifies that a proxy can decide which future +versions of the GNU General Public License can be used, that proxy's +public statement of acceptance of a version permanently authorizes you +to choose that version for the Program. + + Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + + 15. Disclaimer of Warranty. + + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY +OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM +IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. Limitation of Liability. + + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE +USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF +DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), +EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF +SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + + If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +state the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + +Also add information on how to contact you by electronic and paper mail. + + If the program does terminal interaction, make it output a short +notice like this when it starts in an interactive mode: + + Copyright (C) + This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, your program's commands +might be different; for a GUI interface, you would use an "about box". + + You should also get your employer (if you work as a programmer) or school, +if any, to sign a "copyright disclaimer" for the program, if necessary. +For more information on this, and how to apply and follow the GNU GPL, see +. + + The GNU General Public License does not permit incorporating your program +into proprietary programs. If your program is a subroutine library, you +may consider it more useful to permit linking proprietary applications with +the library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. But first, please read +. + diff --git a/networks/remote/ansible/inventory/digital_ocean.ini b/networks/remote/ansible/inventory/digital_ocean.ini new file mode 100644 index 0000000000..b809554b20 --- /dev/null +++ b/networks/remote/ansible/inventory/digital_ocean.ini @@ -0,0 +1,34 @@ +# Ansible DigitalOcean external inventory script settings +# + +[digital_ocean] + +# The module needs your DigitalOcean API Token. +# It may also be specified on the command line via --api-token +# or via the environment variables DO_API_TOKEN or DO_API_KEY +# +#api_token = 123456abcdefg + + +# API calls to DigitalOcean may be slow. For this reason, we cache the results +# of an API call. Set this to the path you want cache files to be written to. +# One file will be written to this directory: +# - ansible-digital_ocean.cache +# +cache_path = /tmp + + +# The number of seconds a cache file is considered valid. After this many +# seconds, a new API call will be made, and the cache file will be updated. +# +cache_max_age = 300 + +# Use the private network IP address instead of the public when available. +# +use_private_network = False + +# Pass variables to every group, e.g.: +# +# group_variables = { 'ansible_user': 'root' } +# +group_variables = {} diff --git a/networks/remote/ansible/inventory/digital_ocean.py b/networks/remote/ansible/inventory/digital_ocean.py new file mode 100755 index 0000000000..24ba64370e --- /dev/null +++ b/networks/remote/ansible/inventory/digital_ocean.py @@ -0,0 +1,471 @@ +#!/usr/bin/env python + +''' +DigitalOcean external inventory script +====================================== + +Generates Ansible inventory of DigitalOcean Droplets. + +In addition to the --list and --host options used by Ansible, there are options +for generating JSON of other DigitalOcean data. This is useful when creating +droplets. For example, --regions will return all the DigitalOcean Regions. +This information can also be easily found in the cache file, whose default +location is /tmp/ansible-digital_ocean.cache). + +The --pretty (-p) option pretty-prints the output for better human readability. + +---- +Although the cache stores all the information received from DigitalOcean, +the cache is not used for current droplet information (in --list, --host, +--all, and --droplets). This is so that accurate droplet information is always +found. You can force this script to use the cache with --force-cache. + +---- +Configuration is read from `digital_ocean.ini`, then from environment variables, +then and command-line arguments. + +Most notably, the DigitalOcean API Token must be specified. It can be specified +in the INI file or with the following environment variables: + export DO_API_TOKEN='abc123' or + export DO_API_KEY='abc123' + +Alternatively, it can be passed on the command-line with --api-token. + +If you specify DigitalOcean credentials in the INI file, a handy way to +get them into your environment (e.g., to use the digital_ocean module) +is to use the output of the --env option with export: + export $(digital_ocean.py --env) + +---- +The following groups are generated from --list: + - ID (droplet ID) + - NAME (droplet NAME) + - image_ID + - image_NAME + - distro_NAME (distribution NAME from image) + - region_NAME + - size_NAME + - status_STATUS + +For each host, the following variables are registered: + - do_backup_ids + - do_created_at + - do_disk + - do_features - list + - do_id + - do_image - object + - do_ip_address + - do_private_ip_address + - do_kernel - object + - do_locked + - do_memory + - do_name + - do_networks - object + - do_next_backup_window + - do_region - object + - do_size - object + - do_size_slug + - do_snapshot_ids - list + - do_status + - do_tags + - do_vcpus + - do_volume_ids + +----- +``` +usage: digital_ocean.py [-h] [--list] [--host HOST] [--all] + [--droplets] [--regions] [--images] [--sizes] + [--ssh-keys] [--domains] [--pretty] + [--cache-path CACHE_PATH] + [--cache-max_age CACHE_MAX_AGE] + [--force-cache] + [--refresh-cache] + [--api-token API_TOKEN] + +Produce an Ansible Inventory file based on DigitalOcean credentials + +optional arguments: + -h, --help show this help message and exit + --list List all active Droplets as Ansible inventory + (default: True) + --host HOST Get all Ansible inventory variables about a specific + Droplet + --all List all DigitalOcean information as JSON + --droplets List Droplets as JSON + --regions List Regions as JSON + --images List Images as JSON + --sizes List Sizes as JSON + --ssh-keys List SSH keys as JSON + --domains List Domains as JSON + --pretty, -p Pretty-print results + --cache-path CACHE_PATH + Path to the cache files (default: .) + --cache-max_age CACHE_MAX_AGE + Maximum age of the cached items (default: 0) + --force-cache Only use data from the cache + --refresh-cache Force refresh of cache by making API requests to + DigitalOcean (default: False - use cache files) + --api-token API_TOKEN, -a API_TOKEN + DigitalOcean API Token +``` + +''' + +# (c) 2013, Evan Wies +# +# Inspired by the EC2 inventory plugin: +# https://github.com/ansible/ansible/blob/devel/contrib/inventory/ec2.py +# +# This file is part of Ansible, +# +# Ansible is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# Ansible is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with Ansible. If not, see . + +###################################################################### + +import os +import sys +import re +import argparse +from time import time +import ConfigParser +import ast + +try: + import json +except ImportError: + import simplejson as json + +try: + from dopy.manager import DoManager +except ImportError as e: + sys.exit("failed=True msg='`dopy` library required for this script'") + + +class DigitalOceanInventory(object): + + ########################################################################### + # Main execution path + ########################################################################### + + def __init__(self): + ''' Main execution path ''' + + # DigitalOceanInventory data + self.data = {} # All DigitalOcean data + self.inventory = {} # Ansible Inventory + + # Define defaults + self.cache_path = '.' + self.cache_max_age = 0 + self.use_private_network = False + self.group_variables = {} + + # Read settings, environment variables, and CLI arguments + self.read_settings() + self.read_environment() + self.read_cli_args() + + # Verify credentials were set + if not hasattr(self, 'api_token'): + sys.stderr.write('''Could not find values for DigitalOcean api_token. +They must be specified via either ini file, command line argument (--api-token), +or environment variables (DO_API_TOKEN)\n''') + sys.exit(-1) + + # env command, show DigitalOcean credentials + if self.args.env: + print("DO_API_TOKEN=%s" % self.api_token) + sys.exit(0) + + # Manage cache + self.cache_filename = self.cache_path + "/ansible-digital_ocean.cache" + self.cache_refreshed = False + + if self.is_cache_valid(): + self.load_from_cache() + if len(self.data) == 0: + if self.args.force_cache: + sys.stderr.write('''Cache is empty and --force-cache was specified\n''') + sys.exit(-1) + + self.manager = DoManager(None, self.api_token, api_version=2) + + # Pick the json_data to print based on the CLI command + if self.args.droplets: + self.load_from_digital_ocean('droplets') + json_data = {'droplets': self.data['droplets']} + elif self.args.regions: + self.load_from_digital_ocean('regions') + json_data = {'regions': self.data['regions']} + elif self.args.images: + self.load_from_digital_ocean('images') + json_data = {'images': self.data['images']} + elif self.args.sizes: + self.load_from_digital_ocean('sizes') + json_data = {'sizes': self.data['sizes']} + elif self.args.ssh_keys: + self.load_from_digital_ocean('ssh_keys') + json_data = {'ssh_keys': self.data['ssh_keys']} + elif self.args.domains: + self.load_from_digital_ocean('domains') + json_data = {'domains': self.data['domains']} + elif self.args.all: + self.load_from_digital_ocean() + json_data = self.data + elif self.args.host: + json_data = self.load_droplet_variables_for_host() + else: # '--list' this is last to make it default + self.load_from_digital_ocean('droplets') + self.build_inventory() + json_data = self.inventory + + if self.cache_refreshed: + self.write_to_cache() + + if self.args.pretty: + print(json.dumps(json_data, sort_keys=True, indent=2)) + else: + print(json.dumps(json_data)) + # That's all she wrote... + + ########################################################################### + # Script configuration + ########################################################################### + + def read_settings(self): + ''' Reads the settings from the digital_ocean.ini file ''' + config = ConfigParser.SafeConfigParser() + config.read(os.path.dirname(os.path.realpath(__file__)) + '/digital_ocean.ini') + + # Credentials + if config.has_option('digital_ocean', 'api_token'): + self.api_token = config.get('digital_ocean', 'api_token') + + # Cache related + if config.has_option('digital_ocean', 'cache_path'): + self.cache_path = config.get('digital_ocean', 'cache_path') + if config.has_option('digital_ocean', 'cache_max_age'): + self.cache_max_age = config.getint('digital_ocean', 'cache_max_age') + + # Private IP Address + if config.has_option('digital_ocean', 'use_private_network'): + self.use_private_network = config.getboolean('digital_ocean', 'use_private_network') + + # Group variables + if config.has_option('digital_ocean', 'group_variables'): + self.group_variables = ast.literal_eval(config.get('digital_ocean', 'group_variables')) + + def read_environment(self): + ''' Reads the settings from environment variables ''' + # Setup credentials + if os.getenv("DO_API_TOKEN"): + self.api_token = os.getenv("DO_API_TOKEN") + if os.getenv("DO_API_KEY"): + self.api_token = os.getenv("DO_API_KEY") + + def read_cli_args(self): + ''' Command line argument processing ''' + parser = argparse.ArgumentParser(description='Produce an Ansible Inventory file based on DigitalOcean credentials') + + parser.add_argument('--list', action='store_true', help='List all active Droplets as Ansible inventory (default: True)') + parser.add_argument('--host', action='store', help='Get all Ansible inventory variables about a specific Droplet') + + parser.add_argument('--all', action='store_true', help='List all DigitalOcean information as JSON') + parser.add_argument('--droplets', '-d', action='store_true', help='List Droplets as JSON') + parser.add_argument('--regions', action='store_true', help='List Regions as JSON') + parser.add_argument('--images', action='store_true', help='List Images as JSON') + parser.add_argument('--sizes', action='store_true', help='List Sizes as JSON') + parser.add_argument('--ssh-keys', action='store_true', help='List SSH keys as JSON') + parser.add_argument('--domains', action='store_true', help='List Domains as JSON') + + parser.add_argument('--pretty', '-p', action='store_true', help='Pretty-print results') + + parser.add_argument('--cache-path', action='store', help='Path to the cache files (default: .)') + parser.add_argument('--cache-max_age', action='store', help='Maximum age of the cached items (default: 0)') + parser.add_argument('--force-cache', action='store_true', default=False, help='Only use data from the cache') + parser.add_argument('--refresh-cache', '-r', action='store_true', default=False, + help='Force refresh of cache by making API requests to DigitalOcean (default: False - use cache files)') + + parser.add_argument('--env', '-e', action='store_true', help='Display DO_API_TOKEN') + parser.add_argument('--api-token', '-a', action='store', help='DigitalOcean API Token') + + self.args = parser.parse_args() + + if self.args.api_token: + self.api_token = self.args.api_token + + # Make --list default if none of the other commands are specified + if (not self.args.droplets and not self.args.regions and + not self.args.images and not self.args.sizes and + not self.args.ssh_keys and not self.args.domains and + not self.args.all and not self.args.host): + self.args.list = True + + ########################################################################### + # Data Management + ########################################################################### + + def load_from_digital_ocean(self, resource=None): + '''Get JSON from DigitalOcean API''' + if self.args.force_cache and os.path.isfile(self.cache_filename): + return + # We always get fresh droplets + if self.is_cache_valid() and not (resource == 'droplets' or resource is None): + return + if self.args.refresh_cache: + resource = None + + if resource == 'droplets' or resource is None: + self.data['droplets'] = self.manager.all_active_droplets() + self.cache_refreshed = True + if resource == 'regions' or resource is None: + self.data['regions'] = self.manager.all_regions() + self.cache_refreshed = True + if resource == 'images' or resource is None: + self.data['images'] = self.manager.all_images(filter=None) + self.cache_refreshed = True + if resource == 'sizes' or resource is None: + self.data['sizes'] = self.manager.sizes() + self.cache_refreshed = True + if resource == 'ssh_keys' or resource is None: + self.data['ssh_keys'] = self.manager.all_ssh_keys() + self.cache_refreshed = True + if resource == 'domains' or resource is None: + self.data['domains'] = self.manager.all_domains() + self.cache_refreshed = True + + def build_inventory(self): + '''Build Ansible inventory of droplets''' + self.inventory = { + 'all': { + 'hosts': [], + 'vars': self.group_variables + }, + '_meta': {'hostvars': {}} + } + + # add all droplets by id and name + for droplet in self.data['droplets']: + # when using private_networking, the API reports the private one in "ip_address". + if 'private_networking' in droplet['features'] and not self.use_private_network: + for net in droplet['networks']['v4']: + if net['type'] == 'public': + dest = net['ip_address'] + else: + continue + else: + dest = droplet['ip_address'] + + self.inventory['all']['hosts'].append(dest) + + self.inventory[droplet['id']] = [dest] + self.inventory[droplet['name']] = [dest] + + # groups that are always present + for group in ('region_' + droplet['region']['slug'], + 'image_' + str(droplet['image']['id']), + 'size_' + droplet['size']['slug'], + 'distro_' + self.to_safe(droplet['image']['distribution']), + 'status_' + droplet['status']): + if group not in self.inventory: + self.inventory[group] = {'hosts': [], 'vars': {}} + self.inventory[group]['hosts'].append(dest) + + # groups that are not always present + for group in (droplet['image']['slug'], + droplet['image']['name']): + if group: + image = 'image_' + self.to_safe(group) + if image not in self.inventory: + self.inventory[image] = {'hosts': [], 'vars': {}} + self.inventory[image]['hosts'].append(dest) + + if droplet['tags']: + for tag in droplet['tags']: + if tag not in self.inventory: + self.inventory[tag] = {'hosts': [], 'vars': {}} + self.inventory[tag]['hosts'].append(dest) + + # hostvars + info = self.do_namespace(droplet) + self.inventory['_meta']['hostvars'][dest] = info + + def load_droplet_variables_for_host(self): + '''Generate a JSON response to a --host call''' + host = int(self.args.host) + droplet = self.manager.show_droplet(host) + info = self.do_namespace(droplet) + return {'droplet': info} + + ########################################################################### + # Cache Management + ########################################################################### + + def is_cache_valid(self): + ''' Determines if the cache files have expired, or if it is still valid ''' + if os.path.isfile(self.cache_filename): + mod_time = os.path.getmtime(self.cache_filename) + current_time = time() + if (mod_time + self.cache_max_age) > current_time: + return True + return False + + def load_from_cache(self): + ''' Reads the data from the cache file and assigns it to member variables as Python Objects''' + try: + cache = open(self.cache_filename, 'r') + json_data = cache.read() + cache.close() + data = json.loads(json_data) + except IOError: + data = {'data': {}, 'inventory': {}} + + self.data = data['data'] + self.inventory = data['inventory'] + + def write_to_cache(self): + ''' Writes data in JSON format to a file ''' + data = {'data': self.data, 'inventory': self.inventory} + json_data = json.dumps(data, sort_keys=True, indent=2) + + cache = open(self.cache_filename, 'w') + cache.write(json_data) + cache.close() + + ########################################################################### + # Utilities + ########################################################################### + + def push(self, my_dict, key, element): + ''' Pushed an element onto an array that may not have been defined in the dict ''' + if key in my_dict: + my_dict[key].append(element) + else: + my_dict[key] = [element] + + def to_safe(self, word): + ''' Converts 'bad' characters in a string to underscores so they can be used as Ansible groups ''' + return re.sub("[^A-Za-z0-9\-\.]", "_", word) + + def do_namespace(self, data): + ''' Returns a copy of the dictionary with all the keys put in a 'do_' namespace ''' + info = {} + for k, v in data.items(): + info['do_' + k] = v + return info + + +########################################################################### +# Run the script +DigitalOceanInventory() diff --git a/networks/remote/ansible/roles/clear-config/tasks/main.yml b/networks/remote/ansible/roles/clear-config/tasks/main.yml new file mode 100644 index 0000000000..5b4504cfba --- /dev/null +++ b/networks/remote/ansible/roles/clear-config/tasks/main.yml @@ -0,0 +1,12 @@ +--- + +- name: Stop service + service: name=gaiad state=stopped + +- name: Delete files + file: "path={{item}} state=absent" + with_items: + - /usr/bin/gaiad + - /home/gaiad/.gaiad + - /home/gaiad/.gaiacli + diff --git a/networks/remote/ansible/roles/setup-validators/defaults/main.yml b/networks/remote/ansible/roles/setup-validators/defaults/main.yml new file mode 100644 index 0000000000..a535d201dc --- /dev/null +++ b/networks/remote/ansible/roles/setup-validators/defaults/main.yml @@ -0,0 +1,4 @@ +--- + +TESTNET_NAME: remotenet + diff --git a/networks/remote/ansible/roles/setup-validators/tasks/main.yml b/networks/remote/ansible/roles/setup-validators/tasks/main.yml new file mode 100644 index 0000000000..8023a67b46 --- /dev/null +++ b/networks/remote/ansible/roles/setup-validators/tasks/main.yml @@ -0,0 +1,50 @@ +--- + +- name: Copy binary + copy: + src: "{{BINARY}}" + dest: /usr/bin + mode: 0755 + +- name: Get node ID + command: "cat /etc/gaiad-nodeid" + changed_when: false + register: nodeid + +- name: Create initial transaction + command: "/usr/bin/gaiad init gen-tx --name=node{{nodeid.stdout_lines[0]}}" + become: yes + become_user: gaiad + args: + creates: /home/gaiad/.gaiad/config/gentx + +- name: Find gentx file + command: "ls /home/gaiad/.gaiad/config/gentx" + changed_when: false + register: gentxfile + +- name: Clear local gen-tx list + file: path=files/ state=absent + connection: local + run_once: yes + +- name: Get gen-tx + fetch: + dest: files/ + src: "/home/gaiad/.gaiad/config/gentx/{{gentxfile.stdout_lines[0]}}" + flat: yes + +- name: Copy generated transactions to all nodes + copy: + src: files/ + dest: /home/gaiad/.gaiad/config/gentx/ + become: yes + become_user: gaiad + +- name: Generate genesis.json + command: "/usr/bin/gaiad init --gen-txs --name=node{{nodeid.stdout_lines[0]}} --chain-id={{TESTNET_NAME}}" + become: yes + become_user: gaiad + args: + creates: /home/gaiad/.gaiad/config/genesis.json + diff --git a/networks/remote/ansible/roles/start/tasks/main.yml b/networks/remote/ansible/roles/start/tasks/main.yml new file mode 100644 index 0000000000..6bc611c91c --- /dev/null +++ b/networks/remote/ansible/roles/start/tasks/main.yml @@ -0,0 +1,5 @@ +--- + +- name: start service + service: "name={{service}} state=started" + diff --git a/networks/remote/ansible/roles/stop/tasks/main.yml b/networks/remote/ansible/roles/stop/tasks/main.yml new file mode 100644 index 0000000000..7db356f224 --- /dev/null +++ b/networks/remote/ansible/roles/stop/tasks/main.yml @@ -0,0 +1,5 @@ +--- + +- name: stop service + service: "name={{service}} state=stopped" + diff --git a/networks/remote/ansible/setup-validators.yml b/networks/remote/ansible/setup-validators.yml new file mode 100644 index 0000000000..f5010777ba --- /dev/null +++ b/networks/remote/ansible/setup-validators.yml @@ -0,0 +1,9 @@ +--- + +- hosts: all + user: root + any_errors_fatal: true + gather_facts: no + roles: + - setup-validators + diff --git a/networks/remote/ansible/start.yml b/networks/remote/ansible/start.yml new file mode 100644 index 0000000000..e9c84ce9e3 --- /dev/null +++ b/networks/remote/ansible/start.yml @@ -0,0 +1,11 @@ +--- + +- hosts: all + user: root + any_errors_fatal: true + gather_facts: no + vars: + - service: gaiad + roles: + - start + diff --git a/networks/remote/ansible/status.yml b/networks/remote/ansible/status.yml new file mode 100644 index 0000000000..fffba41fce --- /dev/null +++ b/networks/remote/ansible/status.yml @@ -0,0 +1,17 @@ +--- + +- hosts: all + connection: local + any_errors_fatal: true + gather_facts: no + + tasks: + - name: Gather status + uri: + body_format: json + url: "http://{{inventory_hostname}}:46657/status" + register: status + + - name: Print status + debug: var=status.json.result + diff --git a/networks/remote/ansible/stop.yml b/networks/remote/ansible/stop.yml new file mode 100644 index 0000000000..d41caa43ff --- /dev/null +++ b/networks/remote/ansible/stop.yml @@ -0,0 +1,11 @@ +--- + +- hosts: all + user: root + any_errors_fatal: true + gather_facts: no + vars: + - service: gaiad + roles: + - stop + diff --git a/networks/remote/terraform/.gitignore b/networks/remote/terraform/.gitignore new file mode 100644 index 0000000000..0cc2d499a2 --- /dev/null +++ b/networks/remote/terraform/.gitignore @@ -0,0 +1,4 @@ +.terraform +terraform.tfstate +terraform.tfstate.backup +terraform.tfstate.d diff --git a/networks/remote/terraform/README.rst b/networks/remote/terraform/README.rst new file mode 100644 index 0000000000..fdccb1a6aa --- /dev/null +++ b/networks/remote/terraform/README.rst @@ -0,0 +1,53 @@ +Using Terraform +=============== + +This is a `Terraform `__ configuration that sets up DigitalOcean droplets. + +Prerequisites +------------- + +- Install `HashiCorp Terraform `__ on a linux machine. +- Create a `DigitalOcean API token `__ with read and write capability. +- Create SSH keys + +Build +----- + +:: + + export DO_API_TOKEN="abcdef01234567890abcdef01234567890" + export TESTNET_NAME="remotenet" + export SSH_PUBLIC_FILE="$HOME/.ssh/id_rsa.pub" + export SSH_PRIVATE_FILE="$HOME/.ssh/id_rsa" + + terraform init + terraform apply -var DO_API_TOKEN="$DO_API_TOKEN" -var SSH_PUBLIC_FILE="$SSH_PUBLIC_FILE" -var SSH_PRIVATE_FILE="$SSH_PRIVATE_FILE" + +At the end you will get a list of IP addresses that belongs to your new droplets. + +Destroy +------- + +Run the below: + +:: + + terraform destroy -var DO_API_TOKEN="$DO_API_TOKEN" -var SSH_PUBLIC_FILE="$SSH_PUBLIC_FILE" -var SSH_PRIVATE_FILE="$SSH_PRIVATE_FILE" + +Good to know +------------ + +The DigitalOcean API was not very reliable for me. If you find that terraform fails to install a specific server (for example cluster[2]), check +the regions variable and remove data center names that you find unreliable. The variable is at cluster/variables.tf + +Example: + +:: + + variable "regions" { + description = "Regions to launch in" + type = "list" + default = ["TOR1", "LON1"] + } + + diff --git a/networks/remote/terraform/cluster/main.tf b/networks/remote/terraform/cluster/main.tf new file mode 100644 index 0000000000..110f92a00c --- /dev/null +++ b/networks/remote/terraform/cluster/main.tf @@ -0,0 +1,46 @@ +resource "digitalocean_tag" "cluster" { + name = "${var.name}" +} + +resource "digitalocean_ssh_key" "cluster" { + name = "${var.name}" + public_key = "${file(var.ssh_public_file)}" +} + +resource "digitalocean_droplet" "cluster" { + name = "${var.name}-node${count.index}" + image = "centos-7-x64" + size = "${var.instance_size}" + region = "${element(var.regions, count.index)}" + ssh_keys = ["${digitalocean_ssh_key.cluster.id}"] + count = "${var.servers}" + tags = ["${digitalocean_tag.cluster.id}"] + + lifecycle = { + prevent_destroy = false + } + + connection { + private_key = "${file(var.ssh_private_file)}" + timeout = "30s" + } + + provisioner "file" { + source = "files/terraform.sh" + destination = "/tmp/terraform.sh" + } + + provisioner "file" { + source = "files/gaiad.service" + destination = "/etc/systemd/system/gaiad.service" + } + + provisioner "remote-exec" { + inline = [ + "chmod +x /tmp/terraform.sh", + "/tmp/terraform.sh ${var.name} ${count.index}", + ] + } + +} + diff --git a/networks/remote/terraform/cluster/outputs.tf b/networks/remote/terraform/cluster/outputs.tf new file mode 100644 index 0000000000..78291b6a97 --- /dev/null +++ b/networks/remote/terraform/cluster/outputs.tf @@ -0,0 +1,15 @@ +// The cluster name +output "name" { + value = "${var.name}" +} + +// The list of cluster instance IDs +output "instances" { + value = ["${digitalocean_droplet.cluster.*.id}"] +} + +// The list of cluster instance public IPs +output "public_ips" { + value = ["${digitalocean_droplet.cluster.*.ipv4_address}"] +} + diff --git a/networks/remote/terraform/cluster/variables.tf b/networks/remote/terraform/cluster/variables.tf new file mode 100644 index 0000000000..e2654b11db --- /dev/null +++ b/networks/remote/terraform/cluster/variables.tf @@ -0,0 +1,30 @@ +variable "name" { + description = "The cluster name, e.g remotenet" +} + +variable "regions" { + description = "Regions to launch in" + type = "list" + default = ["AMS2", "TOR1", "LON1", "NYC3", "SFO2", "SGP1", "FRA1"] +} + +variable "ssh_private_file" { + description = "SSH private key filename to use to connect to the nodes" + type = "string" +} + +variable "ssh_public_file" { + description = "SSH public key filename to copy to the nodes" + type = "string" +} + +variable "instance_size" { + description = "The instance size to use" + default = "2gb" +} + +variable "servers" { + description = "Desired instance count" + default = 4 +} + diff --git a/networks/remote/terraform/files/gaiad.service b/networks/remote/terraform/files/gaiad.service new file mode 100644 index 0000000000..6971665670 --- /dev/null +++ b/networks/remote/terraform/files/gaiad.service @@ -0,0 +1,17 @@ +[Unit] +Description=gaiad +Requires=network-online.target +After=network-online.target + +[Service] +Restart=on-failure +User=gaiad +Group=gaiad +PermissionsStartOnly=true +ExecStart=/usr/bin/gaiad start +ExecReload=/bin/kill -HUP $MAINPID +KillSignal=SIGTERM + +[Install] +WantedBy=multi-user.target + diff --git a/networks/remote/terraform/files/terraform.sh b/networks/remote/terraform/files/terraform.sh new file mode 100644 index 0000000000..39d89ea827 --- /dev/null +++ b/networks/remote/terraform/files/terraform.sh @@ -0,0 +1,19 @@ +#!/bin/bash +# Script to initialize a testnet settings on a server + +#Usage: terraform.sh + +#Add gaiad node number for remote identification +echo "$2" > /etc/gaiad-nodeid + +#Create gaiad user +useradd -m -s /bin/bash gaiad +#cp -r /root/.ssh /home/gaiad/.ssh +#chown -R gaiad.gaiad /home/gaiad/.ssh +#chmod -R 700 /home/gaiad/.ssh + +#Reload services to enable the gaiad service (note that the gaiad binary is not available yet) +systemctl daemon-reload +systemctl enable gaiad + + diff --git a/networks/remote/terraform/main.tf b/networks/remote/terraform/main.tf new file mode 100644 index 0000000000..fb78a37851 --- /dev/null +++ b/networks/remote/terraform/main.tf @@ -0,0 +1,43 @@ +#Terraform Configuration + +variable "DO_API_TOKEN" { + description = "DigitalOcean Access Token" +} + +variable "TESTNET_NAME" { + description = "Name of the testnet" + default = "remotenet" +} + +variable "SSH_PRIVATE_FILE" { + description = "SSH private key file to be used to connect to the nodes" + type = "string" +} + +variable "SSH_PUBLIC_FILE" { + description = "SSH public key file to be used on the nodes" + type = "string" +} + +variable "SERVERS" { + description = "Number of nodes in testnet" + default = "4" +} + +provider "digitalocean" { + token = "${var.DO_API_TOKEN}" +} + +module "cluster" { + source = "./cluster" + name = "${var.TESTNET_NAME}" + ssh_private_file = "${var.SSH_PRIVATE_FILE}" + ssh_public_file = "${var.SSH_PUBLIC_FILE}" + servers = "${var.SERVERS}" +} + + +output "public_ips" { + value = "${module.cluster.public_ips}" +} +